TRADLEWARE-DCA+Trend ETF
DCA + Trend: Monthly Contributions with a Bear-Market Exit and Dip-Ladder Re-entry
This strategy treats "putting money in every month" and "managing the pile of money already invested" as two separate jobs. A fixed monthly contribution never stops, even in a bear market — but the accumulated stack gets pulled out entirely when the long-term trend breaks, and put back to work gradually as the market recovers rather than all at once.
The target here is beating plain monthly dollar-cost averaging, not simple buy-and-hold. On broad-market ETFs, which tend to trend upward over long horizons, DCA already captures much of the benefit of buying dips just by staying systematic — a real bar to clear, not a strawman. It's also the one this strategy has consistently cleared across every asset tested so far (see Known limitations for where it falls short of buy-and-hold's raw return instead).
How it works
Every calendar month, a fixed dollar amount is invested, regardless of what the trend is doing — this means fixed dollars buy more shares exactly when the market is cheap, which is the whole point of dollar-cost averaging. Separately, a 200-day SMA acts as a trend filter for the accumulated position: when price closes below it, the entire stack built up so far is sold. When the trend recovers, that money doesn't necessarily go back in all at once — instead it can be split into tranches that buy in stages as price falls further below its prior peak during the bear market, so more of the recovery budget lands at genuinely lower prices instead of guessing the exact bottom.
Entry
Three separate mechanisms add to the position:
Monthly DCA: on the first bar of every calendar month, a fixed dollar amount is invested — by default, this keeps happening even during a bear market (can be turned off to pause contributions below the trend line instead)
Dip-ladder tranches: after a bear-market exit, the re-entry budget is split equally across up to three pieces, regardless of how deep each one triggers — each buys when price falls a further fixed percentage below the running all-time high (15%, 20%, and 30% below, by default) — this uses the all-time high as the reference level specifically because, unlike the moving average, it does not sink during the bear market
Lump sum recovery: any part of the re-entry budget that wasn't already spent by the dip-ladder tranches is deployed in one shot on the first bar the trend recovers
Exit
The entire accumulated position (not the monthly contributions still to come) is sold in full the moment price closes below the 200-day SMA — a trend-broken event, not something that unwinds gradually. An optional "death cross" confirmation (50-day SMA also below the 200-day SMA) can be required before treating a dip as a genuine bear market, which reduces false exits during brief pullbacks.
Parameters
SMA period: 200 days (the trend filter for the exit)
SMA hysteresis band: a dead zone around the SMA, on by default. The regime only flips bullish above SMA×(1+band) or bearish below SMA×(1-band); price sitting between those two lines just holds whatever state it was already in. This filters out marginal SMA crossings that would otherwise trigger an exit and re-entry over a move that never became a real trend break — most such round trips re-buy at close to the same price they sold at, paying costs without capturing anything. Set to 0 to require only a plain SMA cross.
Monthly DCA amount: fixed dollar amount invested on the first bar of each month
Lump re-entry percentage: how much of the value that was sold at the exit gets redeployed on recovery (0 = skip lump entirely and resume monthly DCA only; higher = more of the recovery captured, at the cost of more drawdown if the recovery turns out to be a false one)
Death cross confirmation: off by default; when enabled, requires the 50-day SMA below the 200-day SMA before treating the market as unsafe
DCA during bear regime: on by default; contributions keep buying through the bear market instead of pausing
Dip-ladder toggle and three rung levels (percentage below the running high): default 15%, 20%, 30% below; any rung can be set to 0 to disable it
Whole-share DCA: off by default. A fractional monthly quantity (contribution amount smaller than one share) rounds down to zero on most equity brokers and never fills or fires an alert. Turning this on banks any unspent contribution and carries it to the next month, firing a whole-share order once enough has accumulated
Label offset: how far the buy/sell trade labels sit from the bar, in multiples of ATR(14)
Chart labels
Every fill is marked directly on the chart: a green label below the bar for each buy (tagging which mechanism fired — DCA, LUMP, or RUNG 1/2/3, combined if more than one lands on the same bar) and a red label above the bar for each exit (CRASH EXIT or PERIOD END), showing the blended profit/loss across everything that closed on that bar. Since one crash exit can unwind dozens of separate monthly contributions and dip-ladder buys at once, the P&L shown is the combined result of all of them, not just one trade. Both label types also show the cash left in the account after that fill — useful for keeping an eye on how close the pool is to running dry, since TradingView blocks an order it can't cover and DCA/lump/rung buys stall until the next sale refills it.
Costs modelled
0% commission (typical for US equity brokers), 1 tick slippage, fills at next bar's open.
Intended assets and timeframe
Daily bars, US equity ETFs. Built and tested on MGK specifically, using the settings published as its defaults (death-cross confirmation off, rungs at 15/20/30% below the running high) — that combination is the only one checked end-to-end against a live TradingView run. Seven other broad-market, growth, value, equal-weight, and momentum funds — QQQ, VOO, IVW, IVE, RSP, SPYM, and SPMO — were also tested, each with its own settings rather than MGK's defaults left unchanged, and are very likely to beat plain monthly DCA too: that pattern held without exception on every asset checked so far. Their validated combination is different from what's published here — death-cross confirmation on and wider rungs at 20/30/40% — which is the better starting point if you switch tickers, with QQQ as the one exception even to that (see Known limitations): it pairs better with death-cross confirmation off and the hysteresis band set to 2% instead. Parameter choices matter more than they might look — death-cross on/off, the lump percentage, and the rung spacing have each swung the outcome by a wide margin in testing — so tuning for whichever asset and regime you're actually using, rather than leaving the MGK-tuned defaults unchanged, is worth the effort.
Known limitations
The exit reacts at the next bar's open after the trend breaks, so it lags fast crashes rather than anticipating them. In a slow, grinding bear market, the dip ladder's fixed rungs can all fire and the market can keep falling anyway, leaving a larger paper loss than the version without a ladder — the extra return the ladder aims to capture on recovery is paid for with real, and sometimes severe, worst-case pain during a prolonged decline. Size the lump and rung percentages to a drawdown you could actually hold through, not just a comfortable one. Bear-market DCA contributions can sit on paper losses for a long time before a recovery arrives. Switching to one of the other seven validated funds calls for different settings than the published MGK defaults — see Intended assets and timeframe above. QQQ specifically pairs better with the death-cross confirmation off and the hysteresis band at 2% rather than either of the other two combinations. For VOO, turning death-cross confirmation on is a genuine trade-off rather than a clear-cut fix: it gives a smaller drawdown and better Calmar ratio at the cost of slightly lower return and Sharpe. TradingView's own chart price does not include dividends, so a live TradingView backtest will differ somewhat from a dividend-adjusted one, though trade dates should still match. Over the published defaults' validated window, trade count sits below the sample size usually wanted for stable statistics — treat this as a directional result to build on, not a confirmed edge, until it's been checked over a longer window or across more of the validated assets.
If you already hold a lump-sum position and plan to add ongoing contributions on top of it, don't feed the lump into this strategy's own trading — a crash exit sells everything it holds at once, lump included, and testing found that dragged results down noticeably compared to keeping an existing lump in a separate buy-and-hold position and only running new contributions through this strategy. Even limited to just the ongoing contributions, though, this strategy's trading is not guaranteed to beat simply holding those same contributions — in the scenarios tested so far, plain buy-and-hold of the contributions matched or outperformed running them through the strategy's exit/re-entry logic. Treat this as a tool for managing how an existing trend-following thesis gets traded, not as a proven improvement over doing nothing.
Strategia
TRADLEWARE-DCA
Dollar-Cost Averaging Benchmark
This is a passive reference strategy, not a signal-based trading system. It exists to give an honest, apples-to-apples comparison for active strategies: instead of trying to time entries, it buys a fixed amount of the asset on a regular schedule until a set capital budget is fully deployed.
How it works
Dollar-cost averaging (DCA) means investing a fixed amount of money at regular intervals, regardless of price. Some buys land at high prices, some at low prices, and over time the average purchase price smooths out. There is no attempt to predict direction — the schedule is the whole strategy.
This script buys on either a fixed day of the week (e.g. every Monday) or every fixed number of bars (e.g. every 30 daily bars, roughly monthly), and keeps buying until the total amount invested reaches the strategy's starting capital. After that, no more buys are placed — the same total capital pool as whatever active strategy this is being compared against, with no extra money added along the way.
Entry
A buy is placed each time the schedule fires, as long as the running total invested plus the next buy amount does not exceed the starting capital. If a scheduled buy would push the total over budget, it is skipped, but the schedule keeps advancing rather than getting stuck retrying.
Exit
There is no exit signal in the usual sense — the strategy only ever adds to its position. The full position is closed out once, on the final bar of the chart's history, purely so the backtest can report a final equity figure. This is bookkeeping, not a trading decision.
Parameters
Start Date / End Date: window during which buys are allowed
Use Day of Week Mode: switch between "buy on a specific weekday" and "buy every N bars"
Day of Week: which weekday to buy on, when day-of-week mode is on
Every X Bars: how many bars between buys, when day-of-week mode is off (30 on a daily chart is roughly monthly)
Amount per buy: fixed amount invested at each scheduled buy
The strategy allows up to 500 stacked buy layers to accumulate into a single overall position — that number just needs to be large enough to never run out before the capital budget is spent; it is not a trading parameter to tune.
Costs modelled
0.1% commission per side, 3 ticks slippage, fills at the same bar's close (this benchmark intentionally fills immediately rather than waiting for the next bar's open, since there is no signal timing to protect).
Intended assets and timeframe
Works on any asset or timeframe — the frequency inputs just need to be set to match (e.g. 30 bars on a daily chart for roughly monthly buys, 7 for weekly). For higher-priced assets, check that the per-buy amount converts to at least a fraction TradingView will actually simulate.
Known limitations
The starting capital, buy amount, and buy frequency together decide how long full deployment actually takes — and depending on the chart's date range, that can run out in either direction. With the default settings (10,000 starting capital, 100 per buy, roughly monthly), full deployment takes 100 buys — about 8 years of monthly investing. Starting from 2018-01-01, that budget is exhausted by roughly mid-2026, so on a chart that runs through mid-2026 or later, this script will have already placed its last scheduled buy weeks or months before the present: it simply holds the fully-invested position afterward and stops buying, exactly as designed by the "never invest more than the starting capital" rule, not because of an error. On a shorter chart window relative to the amount and frequency chosen, the opposite can happen instead — the window ends before the full budget is spent, leaving some capital undeployed. Either way, check the strategy's equity and invested-capital tracking rather than assuming full deployment by the end of the chart. This script also has no risk management of any kind by design: it never sells until the very end, so it carries full exposure to any drawdown the asset experiences. That is the intended comparison point for an active strategy, not a flaw to fix.
Strategia
Ticker Pulse Meter BasicPairs nicely with the Contrarian 100 MA located here:
and the Enhanced Stock Ticker with 50MA vs 200MA located here:
Description
The Ticker Pulse Meter Basic is a dynamic Pine Script v6 indicator designed to provide traders with a visual representation of a stock’s price position relative to its short-term and long-term ranges, enabling clear entry and exit signals for long-only trading strategies. By calculating three normalized metrics—Percent Above Long & Above Short, Percent Above Long & Below Short, and Percent Below Long & Below Short—this indicator offers a unique "pulse" of market sentiment, plotted as stacked area charts in a separate pane. With customizable lookback periods, thresholds, and signal plotting options, it empowers traders to identify optimal entry points and profit-taking levels. The indicator leverages Pine Script’s force_overlay feature to plot signals on either the main price chart or the indicator pane, making it versatile for various trading styles.
Key Features
Pulse Meter Metrics:
Computes three percentages based on short-term (default: 50 bars) and long-term (default: 200 bars) lookback periods:
Percent Above Long & Above Short: Measures price strength when above both short and long ranges (green area).
Percent Above Long & Below Short: Indicates mixed momentum (orange area).
Percent Below Long & Below Short: Signals weakness when below both ranges (red area).
Flexible Signal Plotting:
Toggle between plotting entry (blue dots) and exit (white dots) signals on the main price chart (location.abovebar/belowbar) or in the indicator pane (location.top/bottom) using the Plot Signals on Main Chart option.
Entry/Exit Logic:
Long Entry: Triggered when Percent Above Long & Above Short crosses above the high threshold (default: 20%) and Percent Below Long & Below Short is below the low threshold (default: 40%).
Long Exit: Triggered when Percent Above Long & Above Short crosses above the profit-taking level (default: 95%).
Visual Enhancements:
Plots stacked area charts with semi-transparent colors (green, orange, red) for intuitive trend analysis.
Displays threshold lines for entry (high/low) and profit-taking levels.
Includes a ticker and timeframe table in the top-right corner for quick reference.
Alert Conditions: Supports alerts for long entry and exit signals, integrable with TradingView’s alert system for automated trading.
Technical Innovation: Combines normalized price metrics with Pine Script v6’s force_overlay for seamless signal integration on the price chart or indicator pane.
Technical Details
Calculation Logic:
Uses confirmed bars (barstate.isconfirmed) to calculate metrics, ensuring reliability.
Short-term percentage: (close - lowest(low, lookback_short)) / (highest(high, lookback_short) - lowest(low, lookback_short)).
Long-term percentage: (close - lowest(low, lookback_long)) / (highest(high, lookback_long) - lowest(low, lookback_long)).
Derived metrics:
pct_above_long_above_short = (pct_above_long * pct_above_short) * 100.
pct_above_long_below_short = (pct_above_long * (1 - pct_above_short)) * 100.
pct_below_long_below_short = ((1 - pct_above_long) * (1 - pct_above_short)) * 100.
Signal Plotting:
Entry signals (long_entry) use ta.crossover to detect when pct_above_long_above_short crosses above entryThresholdhigh and pct_below_long_below_short is below entryThresholdlow.
Exit signals (long_exit) use ta.crossover for pct_above_long_above_short crossing above profitTake.
Signals are plotted as tiny circles with force_overlay=true for main chart or standard plotting for the indicator pane.
Performance Considerations: Optimized for efficiency by calculating metrics only on confirmed bars and using lightweight plotting functions.
How to Use
Add to Chart:
Copy the script into TradingView’s Pine Editor and apply it to your chart.
Configure Settings:
Short Lookback Period: Adjust the short-term lookback (default: 50 bars) for sensitivity.
Long Lookback Period: Set the long-term lookback (default: 200 bars) for broader context.
Entry Thresholds: Modify high (default: 20%) and low (default: 40%) thresholds for entry conditions.
Profit Take Level: Set the exit threshold (default: 95%) for profit-taking.
Plot Signals on Main Chart: Check to display signals on the price chart; uncheck for the indicator pane.
Interpret Signals:
Long Entry: Blue dots indicate a strong bullish setup when price is high relative to both lookback ranges and weakness is low.
Long Exit: White dots signal profit-taking when strength reaches overbought levels.
Use the stacked area charts to assess trend strength and momentum.
Set Alerts:
Create alerts for Long Entry and Long Exit conditions using TradingView’s alert system.
Customize Visuals:
Adjust colors and thresholds via TradingView’s settings for better visibility.
The ticker table displays the symbol and timeframe in the top-right corner.
Example Use Cases
Swing Trading: Use entry signals to capture short-term bullish moves within a broader uptrend, exiting at profit-taking levels.
Trend Confirmation: Monitor the green area (Percent Above Long & Above Short) for sustained bullish momentum.
Market Sentiment Analysis: Use the stacked areas to gauge bullish vs. bearish sentiment across timeframes.
Notes
Testing: Backtest the indicator on your chosen market and timeframe to validate its effectiveness.
Compatibility: Built for Pine Script v6 and tested on TradingView as of June 20, 2025.
Limitations: Signals are long-only; adapt the script for short strategies if needed.
Enhancements: Consider adding a histogram for the difference between metrics or additional thresholds for nuanced trading.
Acknowledgments
Inspired by public Pine Script examples and designed to simplify complex market dynamics into a clear, actionable tool. For licensing or support, contact Chuck Schultz (@chuckaschultz) on TradingView. Share feedback in the comments, and happy trading!
Indicatore
Dollar Cost Averaging (YavuzAkbay)The Dollar Cost Averaging (DCA) indicator is designed to support long-term investors following a Dollar Cost Averaging strategy. The core aim of this tool is to provide insights into overbought and oversold levels, assisting investors in managing buy and sell decisions with a clear visual cue system. Specifically developed for use in trending or fluctuating markets, this indicator leverages support and resistance levels to give structure to investors' buying strategies. Here’s a detailed breakdown of the indicator’s key features and intended usage:
Key Features and Color Coding
Overbought/Oversold Detection:
The indicator shades candles from light green to dark green when an asset becomes increasingly overbought. Dark green signals indicate a peak, where the asset is overbought, suggesting a potential opportunity to take partial profits.
Conversely, candles turn from light red to dark red when the market is oversold. Dark red signifies a heavily oversold condition, marking an ideal buying window for initiating or adding to a position. This color scheme provides a quick visual reference for investors to manage entries and exits effectively.
Support and Resistance Levels:
To address the risk of assets falling further after an overbought signal, the DCA indicator dynamically calculates support and resistance levels. These levels guide investors on key price areas to watch for potential price reversals, allowing them to make more informed buying or selling decisions.
Support levels help investors assess whether they should divide their capital across multiple buy orders, starting at the current oversold zone and extending to anticipated support zones for maximum flexibility.
Usage Methodology
This indicator is intended for Dollar Cost Averaging, a method where investors gradually add to their position rather than entering all at once. Here’s how it complements the DCA approach:
Buy at Oversold Levels: When the indicator shows a dark red candle, it signals that the asset is oversold, marking an optimal entry point. The presence of support levels can help investors determine if they should fully invest their intended amount or stagger buys at potential lower levels.
Sell at Overbought Levels: When the indicator transitions to dark green, it suggests that the asset is overbought. This is an ideal time to consider selling a portion of holdings to realize gains. The resistance levels, marked by the indicator, offer guidance on where the price may encounter selling pressure, aiding investors in planning partial exits.
Customizable Settings
The DCA indicator offers several user-adjustable parameters:
Pivot Frequency and Source: Define the pivot point frequency and the source (candle wick or body) for more tailored support/resistance detection.
Maximum Pivot Points: Set the maximum number of pivot points to be used in support/resistance calculations, providing flexibility in adapting to different market structures.
Channel Width and Line Width: Adjust the width of the channel for support/resistance levels and the thickness of the lines for easier visual tracking.
Color Intensities for Overbought/Oversold Levels: Customize the shading intensity for each overbought and oversold level to align with your trading preferences.
Indicatore
