DrawIndicatorOnTheChart

Library "DrawIndicatorOnTheChart"
this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements

drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Note di rilascio

v2

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, windowLabel)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
windowLabel (string): is the label of the window
Returns: none

Note di rilascio

v5

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Note di rilascio

v6

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicator4, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicator4 (float): is fourth indicator you want to show
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Note di rilascio

v10

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Note di rilascio

v11

Note di rilascio

v12

Note di rilascio

v13

Note di rilascio

v14

Note di rilascio

v15

Note di rilascio

v16

Note di rilascio

v17

Note di rilascio

v18

Note di rilascio

v19

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
indicatorName (string)
indicator1 (float)
indicator2 (float)
indicator3 (float)
indicatorcolors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

Note di rilascio

v20

Note di rilascio

v21

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Note di rilascio

v22

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Note di rilascio

v23

Note di rilascio

v24

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicatorcolor (color): is the color of indicator line
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Note di rilascio

v25

Note di rilascio

v26

더해짐
findIndiLoc()

getIndiLevel(indi, indimax, indimin, top, bottom)
Parameters:
indi (float)
indimax (float)
indimin (float)
top (float)
bottom (float)

findLowestTimeframe(timeframes)
Parameters:
timeframes (array<int>)

findLabelIndex(timeframes, lowestTimeframe)
Parameters:
timeframes (array<int>)
lowestTimeframe (int)

drawMultipleIndicators(enabled, title, windowNumber, indicatorValues, timeframes, indicatorColors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
title (string)
windowNumber (int)
indicatorValues (array<float>)
timeframes (array<int>)
indicatorColors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

없어짐
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart

Note di rilascio

v27

없어짐
findIndiLoc()

Note di rilascio

v28

Libreria Pine

Nello spirito di TradingView, l'autore ha pubblicato questo codice Pine come libreria open source affinché altri programmatori della nostra comunità possano riutilizzarlo. Complimenti all'autore! È possibile utilizzare questa libreria privatamente o in altre pubblicazioni open source, ma il riutilizzo di questo codice nelle pubblicazioni è soggetto al Regolamento.

brasscoin

Declinazione di responsabilità

Le informazioni e le pubblicazioni non sono intese come, e non costituiscono, consulenza o raccomandazioni finanziarie, di investimento, di trading o di altro tipo fornite o approvate da TradingView. Per ulteriori informazioni, consultare i Termini di utilizzo.

Libreria Pine

brasscoin