Inizia

BTCUSD

BTC Active Address Momentum (On-chain)This indicator shows the difference between the % change in BTC price and the % change in BTC’s active addresses (BTC’s utility value). - Dark red: Extreme overbought conditions BTC price is increasing too fast and outgrows the increase in its utility value (RSI of % change difference > 70) - Light red: Overbought conditions BTC price is increasing too fast and outgrows the increase in its utility value (RSI of % change difference > 60) - Dark green: Extreme oversold conditions BTC price is dropping too fast and outruns the decrease in its utility value (RSI of % change difference < 30) - Light green: Oversold conditions BTC price is dropping too fast and outruns the decrease in its utility value (RSI of % change difference < 40) *Not financial advice.
Indicatore Pine Script®
di Phi-Deltalytics
1
Trend IdentifierTrend Identifier for 1D BTC.USD It smoothens a closely following moving average into a polynomial like plot. And assumes 4 stage cycles based on the first and second derivatives. Green: Bull / Exponential Rise Yellow: Distribution Red: Bear / Exponential Drop Blue: Accumulation Red --> Blue --> Green: indicates the start of a bull market Green --> Yellow --> Red: indicates the start of a bear market Green --> Yellow: Start of a distribution phase, take profits Red --> Blue: Start of a accumulation phase, DCA
Indicatore Pine Script®
di spacekadet17
12
SOPR SignalThe script uses Glassnode's SOPR on-chain data to identify: 1. Sentiment Trends: - Green circle on bottom (Bullish) -> Investors are selling in profits - Red circle on top (Bearish) -> Investors are selling in losses 2. Short-term Entries: - Small green circle on SOPR (Bullish) -> Approaching investor purchase price in bull run -> not willing to sell -> decrease supply - Small red circle on SOPR (Bearish) -> Approaching break even price in bear run -> chance to get out -> increase supply 3. Potential Trend Change: - Yellow circle on top/bottom -> Potential trend changing soon
Indicatore Pine Script®
di Phi-Deltalytics
5
[CP]Pivot Boss Multi Timeframe CPR Inception with MACD and EMAINTRODUCTION: This indicator combines multi-timeframe CPR bands with MACD Momentum and EMA trend, all projected on the candlestick chart through a novel visualization. If you have seen my other indicators on TradingView, you would know that I use floor pivots a lot and “Secrets of a Pivot Boss” is my favorite book. While using floor pivots, time and again I have noticed an interesting price behavior, Trending moves in price typically start from around the Central Pivot Range (CPR). The CPR could be from ANY timeframe. These moves can easily be caught using simple momentum and trend indicators like MACD and EMA crossovers. Yes, it is that simple. Follow along to understand how to use this indicator. INDICATOR SETTINGS: RANGEBOUND MACD AND EMA MARKINGS: TradingView limits the max number of labels that can be shown on a chart to 500. Therefore, if you go far back enough, you won't see any markings for the MACD or EMA setups. If you are looking to test the efficacy of this indicator in the past, change the start and end dates to your desired timeframe and then select the ‘Mark MACD and EMA Setups in Range?’ option. MULTI TIMEFRAME CENTRAL PIVOT RANGE: Here you can select CPRs and their bands from which timeframes are shown on the chart. I will share my favorite settings later in this description. CPR CONFIGURATION: Show CPR Labels: CPRs markings can carry labels, so that you don’t confuse between which line is what. Use this setting to toggle them On/Off. Show Next Time Period Pivots: Check this option if you want to see the CPR of the next time period. This is typically done to figure out the ’Two Day CPR Relationship’ . Read the book, “Secrets of a Pivot Boss”, to understand more. EMA TREND: Show EMA on the Chart: EMAs will be plotted on the chart. Standard stuff. Mark EMA Crossovers on Chart: EMA crossovers will be marked on the chart in diamond shapes. If you are using EMA crossovers, I recommend setting this option to True. Rest of the EMA settings are fairly obvious. MACD MOMENTUM: Projecting MACD parameters directly on the candlesticks is surely going to give you a new perspective about price action and MACD. Also, in order to better understand the MACD projections on the chart, you can add a standard MACD indicator on the chart with default settings to figure out what my indicator is actually showing you. Marking MACD Crossovers on Chart: Marks the MACD signal crossovers on the chart. This visualization was a game changer for me. Show MACD Histogram on Chart: Projects the complete MACD Histogram in a novel fashion (Try it!). You will be able to visually see the ebbs and flow of momentum in the charts. Mark MACD Histogram Peaks on Chart: Marks only the MACD peaks instead of the complete histogram. Peaks are a great way to enter an ongoing trend and to play an intraday rangebound market. Rest of the settings are just the standard settings that you will find in a typical MACD indicator. ALERTS: Not shown in the settings panel, but I have added alerts for EMA and MACD Crossovers so that you don’t have to sit in front of the charts or constantly check the price all day long. If you don’t know how to set alerts in TradingView, then please Google it. INDICATOR USAGE EXAMPLES: This indicator can be used in intraday as well as in higher timeframes. There are quite a few variations possible, I personally prefer to use the EMA crossovers in intraday (5m) and MACD on Daily timeframes. This is just a matter of personal preference, some people might prefer using EMAs only or MACD only in all timeframes. Here are my personal settings for the intraday 5-minute timeframe: Turn on all the CPR pivots starting from Yearly all the way to Daily. You can turn on 6 hourly and 4 hourly as well if you want. Hourly CPR is mostly used when the price is in a strong trend and you missed the entry and don’t know when to enter. Price will typically experience pullbacks towards the Hourly CPR, before resuming in the direction of the trend. That is your chance to hop onto the bandwagon. For Intraday, I keep the Bands off. Just a personal preference here. You can turn ON the Show CPR Labels , if you want. Turn ON both the options in the EMA TREND section. You would want to see the EMA crossovers marked on the chart as well as the EMAs themselves, as the distance between the two EMAs will give you an idea about the strength of the trend. Keep rest of the settings in the EMA section as default (you can change the colors if you wish). I keep the same EMAs as the ones kept in the MACD indicator. I like to keep things simple. In the MACD MOMENTUM section, turn ON Mark MACD Histogram Peaks on Chart and all the other options turned OFF. Leave the other settings as default. By the way, these are the default settings of the standard MACD Indicator. You can set up EMA Bullcross and Bearcross alarms if you like. Before checking out the examples, remember one super simple rule: SOME OF THE BEST TRENDING MOVES IN THE MARKET, BE IT INTRADAY OR OTHERWISE, ORIGINATE IN THE VICINITY OF A LARGER TIMEFRAME PIVOT/CPR. Look for price settling above/below a pivot, and then a move away from the pivot in any direction is typically a trending move. You can use hourly pivots or MACD Histogram peaks marked on the chart to enter an existing trend, or add to your positions. Let’s have a look at a few recent intraday examples from the Crypto, Indian, and US equity markets. I have added my comments in the charts to make you easily understand what is going on. Understand that both, moving average crossover and MACD, will give out a lot of signals (chop) every day. But almost 70% of them are going to be fake signals. It is the signals that you get when the price is near a Pivot, that tend to convert into gorgeous trending moves that last. BTC 5m Charts NIFTY Futures 5m Charts (good intraday trends are hard to find here, as the market is very efficient) TSLA 5m Charts Some important points for using this indicator in higher timeframes: For higher timeframes, my personal preference is to go with the MACD indicator. I personally find MACD to be lethal on daily and weekly timeframes, if you know how to use it well. The default settings of the indicator are the settings I use for both, Daily and Weekly, timeframes. Additionally, I turn off the CPR labels. In theory large trending moves still have a big probability to start near an important pivot level, however, in larger timeframes, trending moves can start from anywhere. They need not start in the vicinity of any important pivot (but they often do!). Weekly pivots can act as great pullback levels when the price is in strong momentum, when trading on the daily timeframe. Quarterly Pivots act as great pullback levels when the price is in strong momentum, when trading on the weekly timeframe. BTC Weekly Chart BTC Daily Chart Nifty Weekly Chart Nifty Daily Chart NASDAQ Weekly Chart NASDAQ Daily Chart FINAL WORDS: Please understand that I have Cherry Picked the examples to showcase the capability of the indicator and its usage. DO NOT conflate the accuracy of examples with the accuracy of this indicator. Biggest catch is the fact that this indicator, like every other indicator out there, will have whipsaws. Some I have also marked in the example charts. You need to come up with your own technique to avoid whipsaws, one technique I have shared here…… big moves typically start near pivots. Work on avoiding whipsaws and finding you own edge in the markets. If you really want to learn how to use Pivots, read the book ’Secrets of a Pivot Boss’ . This book can change your life.
Indicatore Pine Script®
di pranjalchaubey
15
OptimaLiteThe OptimaLite algorithm performs the calculation of the integrated profits and losses for all the buyers and sellers that they have for the given “Calculation period” back in history for every time point. The idea is based on the principle of the accumulation and distribution of the capital among the market participants leading to the price trend change. The indicator consists of the several components (signal lines): 1) “Return” – the main signal that reflects the integrated profits and losses delta (the “Return” moving average is added) 2) “Profit” and “Loss” – integrated profits and losses correspondingly 3) “Return Normalized” – the normalized “Return” for a given period of time 4) “Return High Frequency” – the “Return” signal compensated with the short-term fluctuations by RSI How to use the indicator: – Highs and lows of the indicator are associated with the overbought and oversold conditions points correspondingly. – Crosses of the moving average with the main indicator line are associated with the trend change – Divergencies between the indicator and price highs or lows can be used as signals for the trend reversal – “Profit” and “Loss” signal lines intersections indicate the bulls/bears take over the market Adjustments: The periods of the calculation, averaging and normalization are the main parameters that could be tuned in order to optimize the indicator performance. Generally, the default values are sufficient for the nominal performance thought. But the best combination of those parameters is specific for each asset and timeframe, so it recommended to optimize them.
Indicatore Pine Script®
di Crypto-Hamster
Trend Day IndentificationVolatility is cyclical, after a large move up or down the market typically "ranges" during the next session. Directional order flow that enters the market during this subsequent session tends not to persist, this non-persistency of transactions leads to a non-trend day which is when I trade intraday reversionary strategies. This script finds trend days in BTC with the purpose of: 1) counting trend day frequency 2) predicting range contraction for the next 1-2 days so I can run intraday reversion strategies Trend down is defined as daily bar opening within X% of high and closing within X% of low Trend up is defined as daily bar opening within X% of low and closing within X% of high default parameters are: 1) open range extreme = 15% (open is within 15% of high or low) 2) close range extreme = 15% (close is within 15% of high or low) There is also an atr filter that checks that the trend day has a larger range than the previous 4 bars this is to make sure we find true range expansion vs recent ranges. Notes: If a trend day occurs after a prolonged sideways contraction it can signal a breakout - this is less common but is an exception to the rule. These types of occurrences can lead to the persistency of order flow and result in extended directional daily runs. If a trend day occurs close to 20 days high or low (stopping just short OR pushing slightly through) then wait an additional day before trading intraday reversion strategies.
Indicatore Pine Script®
di Marcn5_
4
DashBoard Alt Season by KziHere is a Dashboard to have an overview of the Alt Season oportunity. Multiple time frame (Month / Week / Daily /4H) How to use it? You have 4 columns TOTAL Crypto / Btc dominance / Btc Price / Alt ? The alt? column is the resulte of the price and dominance of btc + 1 point with the total crypto BTC Dominance UP ? Yes = Négatif for ALTS /// Btc Price UP ?= > Yes = Positif for ALTS NO = super négatif for ALTS No = Positif for ALTS /// Btc Price UP ?= > Yes = super Positif for ALTS NO = Neutral The total market just smooth the total. If Alt columm is Green= It's OK If Alt columm is orange = carrefull If Alt Columm is red = leave the alt You have to considered that you look on the time frame where you want to trade. The overtime frame help to understand the bigger view. Hop you like it and give comment to help the évolutions.
Indicatore Pine Script®
di Cazimiro
Accumulation/Distribution Bands & Signals (BTC, 1D, BITSTAMP) This is an accumulation/distribution indicator for BTC/USD (D) based on variations of 1400D and 120D moving averages and logarithmic regression. Yellow plot signals Long Term Accumulation, which is based on 1400D (200W) ALMA, orange plot signals Mid Term Accumulation and is based on 120D ALMA, and finally the red plot signals Long Term Distribution that's based on log regression. It should be noted that for red plot to work BTC 1D BITSTAMP graph must be used, because the function of the logarithmic regression was modified according to the x axis of the BITSTAMP data. Signal bands have different coefficients; long term accumulation (yellow) and and the log regression (red) plots have the highest coefficients and mid term accumulation (orange) has the lowest coefficients. Coefficients are 6x, 3x and 1.5x for the red (sell) and yellow (buy) plots and 1x, 2x and 3x for the orange (buy) plot. Selling coefficient for the yellow and the orange plots are respectively 2x and 1x. Buy and sell signals are summed up accordingly and plotted at the top of the highest band. Acknowledgement: Credits for the logarithmic regression function are due @memotyka9009 and Benjamin Cowen
Indicatore Pine Script®
di spacekadet17
8
Chanu Delta RSIThis Chanu Delta RSI indicates the strength of the Bitcoin market. The problem with the previous Chanu Delta Indicator was that it was simply based on the price difference between the two Bitcoin markets, so there was no universality. However, this new Chanu Delta RSI solves the problem by introducing an RSI that compares the price difference trend. This indicator is selectable from both reference and large amplitude BTCUSD markets. I recommend using BYBIT:BTCUSDT for the reference market and COINBASE:BTCUSD for the large amplitude market. _____________________________________________________________ 이 지표는 비트코인 시장의 단기적인 추세를 판단하는데 도움을 줄 수 있습니다. 기존 Chanu Delta 지표의 문제점은 단순히 두 비트코인 ​​시장의 가격차를 기준으로 하여 보편성이 없었다는 점이다. 하지만 이번 새로운 Chanu Delta RSI는 가격차이 추세를 비교하는 RSI를 도입해 문제를 해결했습니다. 이 지표는 레퍼런스 및 큰 진폭 BTCUSD 시장에서 모두 선택할 수 있습니다. 레퍼런스 시장에는 BYBIT:BTCUSDT를 사용하고 큰 진폭 시장에는 COINBASE:BTCUSD를 사용하는 것이 좋습니다.
Indicatore Pine Script®
di chanu_lev10k
1
BTC Cap Dominance RSIBTC Cap Dominance RSI indicator is a combination of the RSI of Bitcoin Market Cap and the RSI of Bitcoin Dominance. The concept of this indicator is to get a good grasp of the bitcoin market flow by combining bitcoin dominance as well as bitcoin market cap. BTC Cap Dominance (BCD) RSI is defined as: BCD RSI = (BTC Cap RSI + BTC Dominance RSI) / 2 Case 1 (Bull market): Both Cap RSI and Dominance RSI values ​​are high Case 2 (Neutral market): Cap RSI is high but Dominance RSI is low Cap RSI is low but Dominance RSI is high Case 3 (Bear market): Both Cap RSI and Dominance RSI values ​​are low (Note) Please note that the market capitalization symbols (CRYPTOCAP:TOTAL and CRYPTOCAP:TOTAL2) of TradingView started in January 2020, so you can check the indicator value from this point on.
Indicatore Pine Script®
di chanu_lev10k
[FTX Funding Colored Candles] [third eye]This Indicator plots FTX: BTCPERP predicted funding rates and colours the candlesticks based on it. !!! Since Tradingview always plots new indicators at the back you might have to click: Name of the Indicator ( ) -> More -> Visual Order -> Bring to Front (unfortunately, there is no way for me to do this in pinescript) There is also the possibility to change colors in the Settings: It is grouped by where Basis is (FTX:BTCPERP - FTX Spot index) Changing that might be good for getting a more close up view of LTF price action. Also to get rid of the Values in the Status line click on Settings and scroll to the bottom to disable "Value in Status Line"
Indicatore Pine Script®
di junglockahashi
1
Bitcoin Golden Bottom Oscillator (MZ BTC Oscillator)This indicator uses Elliot Wave Oscillator Methodology applied on "BTC Golden Bottom with Adaptive Moving Average" and Relative Strength Index of Resulted EVO to form an Oscillator to detect trend health in Bitcoin price. Ticker is set to "INDEX : BTCUSD" on 1D timeframe. Methodology Oscillator uses Adaptive Moving Average with 1 year of length, Minor length of 50 and Major length of 100 to mark AMA as Golden Bottom. Percentage Elliot Wave Oscillator is calculated between BTC price and AMA. Relative Strength Index of EVO is calculated to detect trend strength and divergence detection. Hull Moving Average of resulted RSI is used to smoothen the Oscillator. Oscillator is hard coded to 'INDEX:BTCUSD' ticker on 1d so it can be used on any other chart and on any other timeframe. Color Schemes Bright Red background color indicates that price has left top Fib multiple ATR band and possibly go for top. Light Red background color indicates that price has left 2nd top Fib multiple ATR band and possibly go for local top. Lime background color indicates that price has entered lowest band indicating local bottom. Bright Green background color indicates that price is approximately resting on Golden Bottom i.e. AMA. Oscillator color is set to gradient for easy directional adaption. BTC Golden Bottom with Adaptive Moving Average
Indicatore Pine Script®
di MightyZinger
9
BTC Price OverlayThis is not a crazy strategy like most of the code I write. It's a simple overlay so you can drop BTC on top of whatever chart you are watching. It will track BTC's price on Binance.us (though the exchange is changeable with a few lines of code, maybe I will make it a dropdown on the next iteration of this.) It uses TradingView's scale function to show both assets on a relative chart. BTC's price is on the left and your asset is on the right. I've made this available for free because it is quick and easy. I plan to write a bot based around this code and that one will be private.
Indicatore Pine Script®
di thebiggerhand
2
Universal logarithmic growth curves, with support and resistanceLogarithmic regression is used to model data where growth or decay accelerates rapidly at first and then slows over time. This model is for the long term series data (such as 10 years time span). The user can consider entering the market when the price below 25% or 5% confidence and consider take profit when the price goes above 75% or 95% confidence line. This script is: - Designed to be usable in all tickers. (not only for bitcoin now!) - Logarithmic regression and shows support-resistance level - Shape of lines are all linear adjustable - Height difference of levels and zones are customizable - Support and resistance levels are highlighted Input panel: - Steps of drawing: Won't change it unless there are display problems. - Resistance, support, other level color: self-explanatory. - Stdev multipliers: A constant variable to adjust regression boundaries. - Fib level N: Base on the relative position of top line and base line. If you don't want all fib levels, you might set all fib levels = 0.5. - Linear lift up: vertically lift up the whole set of lines. By linear multiplication. - Curvature constant: It is the base value of the exponential transform before converting it back to the chart and plotting it. A bigger base value will make a more upward curvy line. FAQ: Q: How to use it? A: Click "Fx" in your chart then search this script to get it into your chart. Then right click the price axis, then select "Logarithmic" scale to show the curves probably. Q: Why release this script? A: - This script is intended to to fix the current issues of bitcoins growth curve script, and to provide a better version of the logarithmic curve, which is not only for bitcoin , but for all kinds of tickers. - In the public library there is a hardcoded logarithmic growth curve by @quantadelic . But unfortunately that curve was hardcoded by his manual inputs, which makes the curve stop updating its value since 2019 the date he publish that code. Many users of that script love using it but they realize it was stop updating, many users out there based on @quantadelic version of "bitcoin logarithmic growth curves" and they tried their best to update the coordinates with their own hardcode input values. Eventually, a lot of redundant hardcoded "Bitcoin growth curve" scripts was born in the public library. Which is not a good thing. Q: What about looking at the regression result with a log scale price axis? A: You can use this script that I published in a year ago. This script display the result in a log scale price axis.
Indicatore Pine Script®
di BillionaireLau
15
BTC Puell Multiple with alert functionThe Puell Multiple examines the fundamentals of mining profitability and the way they shape market cycles. It is calculated by taking a ratio of daily coin issuance (in USD) and the 365 moving average of daily coin issuance (in USD). Interpretation of the Puell Multiple can generally be considered in the following framework: high values indicate that current miner profitability if high compared to the yearly average. As such, the incentive for miners to liquidate their treasuries is high and greater sell pressure may be expected. Low values indicate that current miner profitability is low compared to the yearly average. As such, income stress may become a factor, and some miners may need to start reducing hash-power by switching off rigs. This increases the hash-share of remaining miners who can then sell fewer coins to cover their operations, reducing their impact on liquid supply. Halving events will drop the current coin issuance by 50% relative to the preceding year creating an immediate halving of the Puell Multiple also. The effect on miner profitability will thus be as per the point on low values above.
Indicatore Pine Script®
di Crypto_YZ_
11