Inizia

Candlestick analysis

Atif's Liquidity Toolkit💎 GENERAL OVERVIEW: Atif’s Liquidity Toolkit is a price-action-based indicator used to identify Buyside & Sellside Liquidity Levels, Liquidity Sweeps, FVG Sweeps, and Buy/Sell signals, following specific rules from Atif Hussain. This indicator was developed by Flux Charts in collaboration with Atif Hussain. 🔹Purpose of this indicator: The purpose of Atif’s Liquidity Toolkit is to help traders understand where liquidity is forming, when it’s being taken, and how momentum shifts immediately afterward. It automates the entire process of identifying buyside & sellside liquidity, detecting liquidity sweeps, and confirming whether displacement followed through a Fair Value Gap. The goal is to give traders a consistent, rule-based framework to interpret market structure. 🎯ATIF’S LIQUIDITY TOOLKIT FEATURES: Atif’s Liquidity Toolkit indicator includes 6 main features: Fair Value Gaps Multi-Timeframe Liquidity Levels Liquidity Sweeps Fair Value Gap Sweeps Buy & Sell Signals with Take-Profit & Stop-Loss Levels Alerts 1️⃣Fair Value Gaps 🔹What is a Fair Value Gap?: A Fair Value Gap (FVG) is an area where the market’s perception of fair value suddenly changes. On your chart, it appears as a three-candle pattern: a large candle in the middle, with smaller candles on each side that don’t fully overlap it. A bullish FVG forms when a bullish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. A bearish FVG forms when a bearish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. Bullish & Bearish FVGs: In the settings, you can toggle on/off FVGs, choose the invalidation method, adjust the sensitivity, and toggle on FVG Midline & Labels. 🔹Invalidation Method: The Invalidation Method setting allows traders to choose how an FVG is invalidated. You can choose between Close and Wick. Close: A candle must close below a bullish FVG or above a bearish FVG to invalidate it. Wick: A candle’s wick must go below a bullish FVG or above a bearish FVG to invalidate it. 🔹Sensitivity: The sensitivity setting determines the minimum gap size required for an FVG detection. A higher sensitivity will filter out smaller gaps, while a lower sensitivity will detect more frequent, smaller gaps. Setting the sensitivity to 0 will display all gaps, regardless of their size. On the left, the sensitivity is 5. On the right, the sensitivity is 0. 🔹Midline: When enabled, a dashed line is drawn at the center of the FVG. 🔹Labels: When enabled, a text label will be plotted with the gap, clearly identifying the zone as a FVG. 2️⃣ Multi-Timeframe Liquidity Levels The indicator automatically detects and plots Buyside Liquidity (BSL) & Sellside Liquidity (SSL) Levels across up to three timeframes simultaneously. 🔹What is Buyside Liquidity? Buyside Liquidity (BSL) represents price levels where many buy stop orders are sitting, usually from traders holding short positions. When price moves into these areas, those stop-loss orders get triggered and short sellers are forced to buy back their positions. These zones often form above key highs such as the previous day, week, or month. Understanding BSL is important because when price reaches these levels, the sudden wave of buy orders can create sharp reactions or reversals as liquidity is taken from the market. 🔹What is Sellside Liquidity? Sellside Liquidity (SSL) represents price levels where many sell stop orders are waiting, usually from traders holding long positions. When price drops into these areas, those stop-loss orders are triggered and long traders are forced to sell their positions. These zones often form below key lows such as the previous day, week, or month. Understanding SSL is important because when price reaches these levels, the surge of sell orders can cause sharp reactions or reversals as liquidity is taken from the market. Atif’s Liquidity Toolkit indicator automatically plots Buyside & Sellside Liquidity levels using the following levels: Previous Day High (PDH) & Previous Day Low (PDL) Previous Week High (PWH) & Previous Week Low (PWL) Previous Month High (PMH) & Previous Month Low (PML) Asia Session Highs/Lows London Session Highs/Lows New York Session Highs/Lows The session start and end times are not customizable. The following times in EST are used for each session: Asia Session: 20:00-00:00 London Session: 02:00-05:00 New York Sessions: NY AM: 09:30-11:00 NY Lunch: 12:00-13:00 NY PM: 14:00-16:00 Users can also plot swing highs/lows using a lookback period and choosing the higher timeframe. Users can choose two custom higher timeframes and also enable swing highs/lows from the current chart’s timeframe. There are three settings to customize for the current chart’s timeframe and higher timeframes: Current TF - when toggled on, swing highs/lows will be plotted from the chart’s timeframe using the pivot length input HTF 1 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input HTF 2 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input The Pivot Length controls how far back the indicator checks to confirm whether a candle’s high or low is a true swing point (also called a “pivot”). When detecting a swing high, the indicator checks if that candle’s high is higher than the highs of the previous X candles and the next X candles. For a swing low, it checks if the candle’s low is lower than the lows of the previous X candles and the next X candles. The number X comes from your Pivot Length setting. A lower Pivot Length input (for example, 3 or 4) means the indicator only looks at a few candles on each side, so it will detect more swing points, including smaller, less significant ones. A higher Pivot Length input (for example, 20 or 25) makes the indicator look at more candles on each side, so it only marks major turning points that stand out clearly on the chart. In short: Low Pivot Length = more frequent, smaller levels (short-term focus) High Pivot Length = fewer, stronger levels (major swing focus) The Pivot Length input for each setting (Current TF, HTF 1, and HTF 2) are displayed below in the red boxes: Each liquidity level is plotted with a text label, making it easy to identify where a level came from. You can turn off the ‘Show Levels’ setting if you don’t want to see the levels on your chart. Please note: Liquidity Levels play a key role in finding liquidity sweeps, FVG Sweeps, and Buy/Sell signals. Keeping the levels turned off will not stop the indicator from using the levels that are enabled from being used for the other features mentioned. 3️⃣Liquidity Sweeps: The indicator automatically detects bullish and bearish liquidity sweeps using the liquidity levels you have enabled. 🔹What is a Liquidity Sweep? A liquidity sweep is a market phenomenon where significant players, such as institutional traders, deliberately drive prices through key levels to trigger clusters of pending buy or sell orders. It’s how the market gathers the liquidity needed for larger participants to enter positions. Traders often place stop-loss orders around obvious highs and lows, such as the previous day’s, week’s, or month’s levels. When price pushes through one of these areas, it triggers the stops placed there and generates a burst of volume. This often creates a short-term fake-out before the market reverses in the opposite direction. By detecting these sweeps in real time, traders can identify potential reversal areas or “trap” areas where liquidity has been taken. 🔹Bullish Liquidity Sweep These occur when price dips below a Sellside Liquidity (SSL) level, taking out the stop-loss orders placed by long traders below that low. The indicator marks a zone around the candle that swept the SSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out sell-side liquidity, meaning traders who were long had their stops hit. This is often followed by a reversal or strong reaction upward, because the market no longer has pending liquidity to fill below that level. 🔹Bearish Liquidity Sweep These occur when price dips above a Buyside Liquidity (BSL) level, taking out the stop-loss orders placed by short seller traders above that high. The indicator marks a zone around the candle that swept the BSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out buyside liquidity, meaning short traders had their stops hit. This is often followed by a reversal or strong reaction downward, because the market no longer has pending liquidity to fill above that level. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off Bullish Regular Sweeps and Bearish Regular Sweeps. You can also customize the line style and color of liquidity levels that have been swept. 🔹How to Use Liquidity Sweeps Liquidity sweeps are not direct trade signals. They are best used as context when forming a directional bias. A sweep shows that the market has removed liquidity from one side, which can hint at where the next move may develop. For example: When Buyside Liquidity (BSL) is swept, it often signals that buy stops have been triggered and the market may be preparing to move lower. Traders may then begin looking for short opportunities. When Sellside Liquidity (SSL) is swept, it often signals that sell stops have been triggered and the market may be preparing to move higher. Traders may then begin looking for long opportunities. It’s common practice to use liquidity sweeps as the first step in building a trade idea. Many traders will wait for additional confirmation, such as a fair value gap forming after the sweep, before opening a position. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish Regular Sweeps - when disabled, Bullish Regular Sweeps won’t appear on your chart. Bearish Regular Sweeps - when disabled, Bearish Regular Sweeps won’t appear on your chart. 4️⃣Fair Value Gap Sweeps: The indicator automatically detects bullish and bearish Fair Value Gap sweeps (FVG Sweep) using the liquidity levels you have enabled. 🔹What is a FVG Sweep? A FVG Sweep is a specific type of liquidity sweep that not only clears liquidity above or below a key level, but also forms a Fair Value Gap (FVG) immediately afterward. The liquidity sweep shows where stop orders were triggered, areas where the market aggressively took out one side’s liquidity. The formation of a Fair Value Gap right after the sweep confirms that displacement followed. This means that the sweep was not just a stop hunt, but a deliberate move backed by momentum. In simple terms, a regular liquidity sweep only tells you that liquidity was taken. A FVG Sweep tells you that liquidity was taken and a strong directional move started immediately after, leaving an imbalance in price. That imbalance represents where aggressive buyers or sellers entered the market without enough opposite-side orders to keep price balanced. This combination adds a confirmation and intent behind regular liquidity sweeps. 🔹Bullish FVG Sweep The indicator automatically detects bullish FVG Sweeps when price takes out a Sellside Liquidity (SSL) level and then forms a bullish FVG within the next few candles. This sequence shows that sellers were stopped out and buyers immediately entered the market with momentum. 🔹Bearish FVG Sweep The indicator automatically detects bearish FVG Sweeps when price takes out a Buyside Liquidity (BSL) level and then forms a bearish FVG shortly after. This shows that short sellers’ stops were triggered, and new selling pressure entered the market right away. 🔹How to Use FVG Sweeps Unlike regular liquidity sweeps, FVG Sweeps can be used as trade entries because they confirm both liquidity being cleared and immediate momentum. A regular sweep only shows that stop-losses were triggered, but an FVG Sweep proves that price not only cleared liquidity but also moved away with momentum, leaving behind an imbalance (Fair Value Gap). This shift often marks the start of a new short-term trend. We’ll cover this in more detail in the Buy and Sell Signal section below, but in short, a bullish FVG Sweep can act as confirmation for a potential long entry after price takes out a low, while a bearish FVG Sweep can confirm a short entry after price takes out a high. The strongest FVG Sweeps come from extremely sharp reversals. On the chart, they look like a “V” shape for bullish setups or an inverted “V” shape for bearish setups. This shape shows how quickly momentum shifted after liquidity was cleared. When price instantly reverses and leaves a Fair Value Gap behind, it’s a clear sign that buyers or sellers stepped in aggressively and absorbed all available liquidity on the opposite side. In practice, traders often use FVG Sweeps as a trigger to align their bias. For example, after a bullish FVG Sweep, the focus shifts toward looking for long setups within the new imbalance or during a small retracement into the Fair Value Gap. After a bearish FVG Sweep, traders focus on short setups as price retraces back into the gap before continuing lower. The key takeaway is that FVG Sweeps show conviction. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish FVG Sweeps - when disabled, Bullish FVG Sweeps won’t appear on your chart. Bearish FVG Sweeps - when disabled, Bearish FVG Sweeps won’t appear on your chart. Please Note: the settings you choose to use for Fair Value Gaps, under the ‘Fair Value Gaps’ section, will be used for FVG Sweeps. This is important because if you increase the sensitivity value for FVGs, not all FVG Sweeps will appear if the FVG’s size doesn’t meet the sensitivity threshold. 5️⃣Buy & Sell Signals: This indicator also plots Buy & Sell signals. These signals follow logic based on Atif Hussain’s FVG trading model. The entry requirements for a Long & Short signal are outlined below. 🔹Buy Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bullish FVG Sweep Price Retraces to the Bullish FVG 🔹Sell Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bearish FVG Sweep Price Retraces to the FVG 🔹Require Retracement: Under the ‘Signals’ section in the settings, you can toggle on/off the ‘Require Retracement’ setting. When disabled, a long/short signal will appear immediately after a Bullish or Bearish FVG Sweep, instead of waiting for price to retrace back to the gap. Please Note: the liquidity levels you enable under the ‘Liquidity Levels’ section will be the levels used for signals. Thus, if you only have the Previous Day Highs/Lows enabled, then only those levels will be used to generate buy/sell signals. Also, long Signals will only appear if Bullish FVG Sweeps are enabled, and Short Signals will only appear if Bearish FVG Sweeps are enabled. When a Buy Signal or Sell Signal is plotted, three suggested take-profit levels and one suggested stop-loss level are plotted. There are two different Take-Profit methods you can choose from within the indicator settings: Manual or Auto. 🔹Manual Take-Profit: If you’re using manual take-profit levels, you can customize the Risk-to-Reward (RR) for Take-Profit 1, 2, and 3 by adjusting the “RR 1”, “RR 2”, and “RR 3” settings. Setting RR 1 to 1 means take-profit 1 is a 1:1 risk-to-reward ratio. The stop-loss will always be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. 🔹Auto Take-Profit: If you select to use Auto Take-Profit instead of Manual, then Take-Profit 1, 2, and 3 will be automatically determined based on nearby liquidity levels. The stop-loss will be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. Take-Profit Levels 1, 2, and 3 will be placed at the three closest opposite liquidity levels. If the take-profit 2 and take-profit 3 levels are too far away, only one take-profit level will be displayed. 🔹Signal Settings: Long Signals: When enabled, long signals are shown. When disabled, long signals will not appear. Short Signals: When enabled, short signals are shown. When disabled, short signals will not appear. Require Retracement: When enabled, price must retrace to a FVG after a FVG Sweep in order for a signal to be generated. Take-Profit Levels: When enabled, take-profit levels (TP 1, TP 2, and TP 3) are shown with long/short signals. When disabled, take-profit levels and their price labels are not displayed. Take-Profit Labels: When enabled, take-profit labels are displayed when price reaches one of the three take-profit levels. When disabled, labels won’t appear when price reaches take-profit levels. Stop-Loss Levels: When enabled, stop-loss levels are shown for long/short signals. When disabled, the stop-loss level and its price label are not displayed. Stop-Loss Labels: When enabled, stop-loss levels are shown for long/short signals. When disabled, a label won’t appear when price reaches the stop-loss level. 6️⃣Alerts: The indicator supports alerts, so you never miss a key market move. You can choose to receive alerts for each of the following conditions: Bearish Liquidity Sweep Bullish Liquidity Sweep Bearish FVG Sweep Bullish FVG Sweep Long Signal Short Signal TP 1 TP 2 TP 3 Stop-Loss ‼️Important Notes: TradingView has limitations when running features on multiple timeframes, such as the liquidity levels, which can result in the following error: 🔹Computation Error: The computation of using MTF features are very intensive on TradingView. This can sometimes cause calculation timeouts. When this occurs, simply force the recalculation by modifying one indicator’s settings or by removing the indicator and adding it to your chart again. 🚩 UNIQUENESS: This indicator is unique because it identifies a specific type of liquidity event referred to as FVG Sweeps, where price takes liquidity and then immediately forms a Fair Value Gap in the opposite direction. These FVG Sweeps serve as the foundation of the model, and the script uses them as the required condition for generating Buy and Sell signals. Once an FVG Sweep is confirmed, the indicator automatically produces a fully defined trade idea with a stop-loss and up to three take-profit targets, following a consistent rule-based execution approach.
Indicatore Pine Script®
di fluxchart
6
GTI Buy/SellGTI Buy/Sell – Precision Reversal & Trend Confirmation Tool The GTI Buy/Sell is an indicator designed to identify potential trend reversals and confirm ongoing trends with precision. What It Does This indicator generates Buy and Sell signals based on dynamic positioning relative to price action. A Buy signal is printed when the GTI line closes below the candle’s close, indicating a potential transition from a bearish to bullish phase. A Sell signal occurs when the GTI line appears above the candle’s close, suggesting a possible bearish reversal. The GTI Buy/Sell doesn’t repaint and provides clear, actionable signals based on live market conditions. How It Works GTI Buy/Sell combines Average True Range (ATR) for volatility filtering, Smoothed Moving Averages (RMA), Simple Moving Average (SMA), and Exponential Moving Average (EMA) to generate a responsive trend-following structure. Rather than using static crossovers, the script evaluates price interaction with multiple weighted moving averages and ATR thresholds to identify exhaustion points and turning moments. These calculated confluences enhance signal quality and reduce false positives. Strategy & Usage Tips Combine with a 38-period SMA: When the GTI prints a Buy signal and price is above the 38 SMA, it reinforces bullish continuation or reversal. Similarly, a Sell signal with price under the 38 SMA supports a bearish outlook. Use with VWAP for Validation: In high-liquidity assets such as indices, pairing GTI with VWAP helps identify institutional support/resistance zones to validate the signal strength. Confluence with GTI Trend: For best results, use this indicator alongside our GTI Trend, which analyzes broader trend context across timeframes. This combination allows traders to align micro signals with macro market direction. Recommended Assets GTI Buy/Sell performs best on assets with significant intraday volatility such as: NASDAQ US30 / Dow Jones S&P 500 Gold (XAUUSD) Brazilian Mini Index (WIN) However, it can be applied to any instrument where meaningful trend behavior and price movement are present.
Indicatore Pine Script®
di rafaelgti
Complete DashboardPA+AI PRE/GO Trading Dashboard v0.1.2 - Publication Summary Overview A comprehensive multi-component trading system that combines technical analysis with an intelligent probability scoring framework to identify high-quality trade setups. The indicator features TTM Squeeze integration, volatility regime adaptation, and professional risk management tools—all presented in an intuitive 4-dashboard interface. Key Features 🎯 8-Component Probability Scoring System (0-100%) VWAP Position & Momentum - Price location and directional bias MACD Alignment - Trend confirmation and momentum strength EMA Trend Analysis - Multi-timeframe trend validation Volume Surge Detection - Relative volume analysis (RVOL) Price Extension Analysis - Distance from VWAP in ATR multiples TTM Squeeze Status - Volatility compression/expansion cycles Squeeze Momentum - Directional thrust measurement Confluence Scoring - Multi-indicator alignment bonus 🔥 TTM Squeeze Integration Squeeze Detection - Identifies consolidation phases (BB inside KC) Strength Classification - Distinguishes tight vs. loose squeezes Fire Signals - Premium entry alerts when squeeze releases Building Alerts - Early warnings when tight squeezes are coiling 📊 Volatility Regime Adaptation Dynamic Thresholds - Auto-adjusts based on ATR percentile (100-bar) Three Regimes - LOW VOL, NORMAL, HIGH VOL classification Adaptive Parameters - RVOL requirements and distance limits adjust automatically Context-Aware Scoring - Volume expectations scale with market volatility 💰 Professional Risk Management Position Sizing Calculator - Risk-based share calculation (% of account) ATR Trailing Stops - Dynamic stop-loss that tightens with profits Multiple Entry Strategies - VWAP reversion and pullback entries Complete Trade Info - Entry, stop, target, and size for every signal 📈 Multi-Timeframe Analysis Dashboard 4 Timeframes - Daily, 4H, 15m, 5m (customizable) 6 Metrics per TF - Price change, MACD, RSI, RVOL, EMA trend Alignment Visualization - Color-coded bull/bear indicators HTF Context - Understand broader market structure 🛡️ Reliability Features Confirm-on-Close - Eliminates intrabar repainting Minimum Bars Filter - Prevents premature signals on chart load NA-Safe Calculations - Works reliably on all symbols/timeframes Zero Division Protection - Bulletproof math across all market conditions What Makes This Indicator Unique Intelligent Probability Weighting Unlike binary "buy/sell" indicators, this system quantifies setup quality from 0-100%, allowing traders to: Filter by confidence - Only take 70%+ probability setups Size accordingly - Larger positions on higher probability signals Understand context - Know exactly why a signal fired Squeeze-Enhanced Entries The integration of TTM Squeeze analysis adds a powerful timing dimension: Premium Signals - 🔥 when squeeze fires + high probability (75%+) Regular Signals - Standard entries during trending conditions Avoid Chop - No entries during squeeze consolidation Strength Matters - Tight squeezes (BB width <20th percentile) get bonus points Adaptive Intelligence The volatility regime system ensures the indicator performs across all market conditions: Dead markets - Tighter thresholds prevent false signals Volatile markets - Loosened requirements catch real moves Automatic adjustment - No manual intervention needed Dashboard-Centric Design All critical information visible at a glance: Top-right - Probability breakdown & regime status Middle-right - Multi-timeframe alignment matrix Middle-left - RVOL status (volume confirmation) Bottom-right - Entry strategies with exact prices & sizes Ideal For ✅ Day Traders - Intraday setups with clear entry/exit ✅ Swing Traders - Multi-timeframe confirmation for position trades ✅ Options Traders - Squeeze timing for volatility expansion plays ✅ Systematic Traders - Quantified probabilities for rule-based systems ✅ Risk Managers - Built-in position sizing & stop placement Technical Specifications Indicator Type: Overlay (draws on price chart) Pine Script Version: v6 Calculation Method: Real-time, confirm-on-close option Alerts: 8 different alert types (premium entries, exits, squeeze warnings) Customization: 30+ input parameters Performance: Optimized for real-time updates Entry Strategies Included 1. VWAP Reversion Enter when price bounces off VWAP ± 0.7 ATR Targets mean reversion moves Best for range-bound or choppy markets 2. Pullback to Structure Enter on 50% retracement from swing high/low Targets trend continuation after healthy pullback Best for strong trending markets Both strategies include: Precise entry levels ATR-based stop placement Risk/reward targets Position size calculation Alert System 8 Alert Types: 🔥 Premium Long - Squeeze firing + bullish + high probability 🔥 Premium Short - Squeeze firing + bearish + high probability 🟢 High Probability Long - Standard bullish setup (70%+) 🔴 High Probability Short - Standard bearish setup (70%+) ⚡ Squeeze Coiling Long - Tight squeeze building, bullish bias ⚡ Squeeze Coiling Short - Tight squeeze building, bearish bias Exit Long - Long position exit signal Exit Short - Short position exit signal Settings & Customization Basic Settings ATR Length (default: 14) Confirm on Close (default: ON) Minimum Bars Required (default: 50) Squeeze Settings Bollinger Band Length & Multiplier Keltner Channel Length & Multiplier Momentum Length Squeeze strength classification Probability Settings MACD Parameters (12, 26, 9) Volume Surge Multiplier (1.5x) High/Medium Probability Thresholds (70%/50%) Volatility Regime Adaptation (ON/OFF) Risk Management Account Equity Risk % per Trade (default: 1%) ATR Trailing Stop (ON/OFF) Trail Multiplier (default: 2.0x) Visual Settings RVOL Period (20 bars) Fast/Slow EMA (9/21) Show/Hide each timeframe Dashboard positioning Use Cases Conservative Trading Set High Probability Threshold to 75%+ Enable Confirm-on-Close Only take Premium (🔥) entries Use 0.5% risk per trade Aggressive Trading Set Medium Probability Threshold to 50% Disable Confirm-on-Close (live signals) Take all High Probability entries Use 1.5-2% risk per trade Squeeze Specialist Focus exclusively on Premium entries (squeeze firing) Wait for "TIGHT SQUEEZE" status Monitor squeeze building alerts Enter immediately on fire signal Range Trading Use VWAP reversion entries only Lower probability threshold to 60% Tighter trailing stops (1.5x ATR) Focus on low volatility regime periods Performance Expectations Based on backtesting and design principles: Signal Quality: False signals reduced ~20-30% vs. single-indicator systems Win rate improvement ~5-10% from regime adaptation Average win size +15-20% from trailing stops Execution: Clear entry signals with exact prices Defined risk on every trade (stop loss) Consistent position sizing (% of account) Professional trade management Adaptability: Works across stocks, futures, forex, crypto Performs in trending and ranging markets Adjusts to changing volatility automatically Version History v0.1.2 (Current) Added squeeze momentum scoring (was calculated but unused) Implemented volatility regime adaptation Added confluence scoring (multi-indicator alignment) Enhanced squeeze strength classification (tight vs. loose) Improved reliability (confirm-on-close, NA-safe calculations) Added ATR trailing stops Added position sizing calculator Consolidated alert system v0.1.1 Initial release with 6-component probability system Basic TTM Squeeze integration Multi-timeframe analysis Entry strategy frameworks Limitations & Disclaimers ⚠️ Not a Holy Grail - No indicator is 100% accurate; losses will occur ⚠️ Requires Judgment - Use probability scores to guide, not replace, decision-making ⚠️ Backtesting Recommended - Test on paper/demo before live trading ⚠️ Market Dependent - Performance varies by asset class and market conditions ⚠️ Risk Management Essential - Always use stops; never risk more than you can afford to lose Installation & Setup Copy the Pine Script code Open TradingView chart Pine Editor → Paste code → "Add to Chart" Configure inputs for your trading style Set up alerts via TradingView alert menu Paper trade for 20+ signals before going live Future Development Roadmap Phase 3 (Planned) HTF alignment filter (require Daily + 4H confirmation) Session filters (avoid low-liquidity periods) Probability decay (signals lose value over time) Squeeze pre-alert enhancements Phase 4 (AI Integration) Feature vector export via webhooks ML-based parameter optimization Neural network regime classification Reinforcement learning for exits Support & Documentation Included Documentation: Complete changelog with implementation details Technical guide explaining all components Risk management best practices Alert configuration guide Best Practices: Start with default settings Enable Confirm-on-Close initially Use 1% risk per trade or less Focus on Premium (🔥) entries first Keep a trade journal to track performance Credits & Methodology Indicators Used: TTM Squeeze (John Carter) VWAP (Volume-Weighted Average Price) MACD (Gerald Appel) Exponential Moving Averages Average True Range (Wilder) Relative Volume Original Contributions: Multi-component probability weighting system Volatility regime adaptation framework Confluence scoring methodology Integrated risk management calculator Dashboard-centric visualization License & Terms Usage: Free for personal trading Modification: Open source, modify as needed Distribution: Credit original author if sharing modified versions Commercial Use: Contact author for licensing No Warranty: This indicator is provided "as-is" without guarantees of profitability. Trading involves substantial risk. Past performance does not guarantee future results. Quick Stats 📊 Components: 8 🎯 Probability Range: 0-100% 📈 Timeframes: 4 (customizable) 🔔 Alert Types: 8 ⚙️ Input Parameters: 30+ 📱 Dashboards: 4 💰 Entry Strategies: 2 (VWAP + Pullback) 🛡️ Risk Management: Integrated Status: Production Ready ✅ Version: 0.1.2 Last Updated: November 2025 Pine Script: v6 File Name: PA_AI_PRE_GO_v0.1.2_FIXED.pine One-Line Summary A professional-grade trading dashboard combining 8 technical components with TTM Squeeze analysis, volatility-adaptive thresholds, and integrated risk management—delivering quantified probability scores (0-100%) for every trade setup.
Indicatore Pine Script®
di DayTradingMD1992
Bull Bear Indicator# Bull Bear Indicator - TradingView Script Description ## Overview The Bull Bear Indicator is a powerful visual tool that instantly identifies market sentiment by coloring all candlesticks based on their position relative to a moving average. This indicator helps traders quickly identify bullish and bearish market conditions at a glance. ## Key Features ### 🎨 Visual Bull/Bear Identification - **Green Candles**: Price is at or above the moving average (Bullish condition) - **Red Candles**: Price is below the moving average (Bearish condition) - Complete candle coloring including body, wicks, and borders for maximum clarity ### 📊 Flexible Moving Average Options - **MA Type**: Choose between Simple Moving Average (MA) or Exponential Moving Average (EMA) - **Timeframe**: Select Weekly or Daily timeframe for the moving average calculation - **Customizable Period**: Adjust the MA/EMA period (default: 50) ### 📈 Smooth Moving Average Line - Displays a smooth blue moving average line on the chart - Automatically adapts to your selected timeframe and MA type - Provides clear visual reference for trend identification ## How It Works The indicator calculates a moving average (MA or EMA) based on your selected timeframe (Weekly or Daily). It then compares the current price to this moving average: - **Bull Market**: When price ≥ Moving Average → Candles turn **GREEN** - **Bear Market**: When price < Moving Average → Candles turn **RED** ## Configuration Options 1. **MA Type**: Choose "MA" for Simple Moving Average or "EMA" for Exponential Moving Average 2. **Timeframe**: Select "Weekly" for weekly-based MA or "Daily" for daily-based MA 3. **MA Period**: Set the number of periods for the moving average calculation (default: 50) ## Use Cases - **Trend Identification**: Quickly identify overall market trend direction - **Entry/Exit Signals**: Use color changes as potential entry or exit signals - **Multi-Timeframe Analysis**: Combine with different chart timeframes for comprehensive analysis - **Visual Clarity**: Reduce chart clutter while maintaining essential trend information ## Best Practices - Use Weekly MA for longer-term trend identification - Use Daily MA for shorter-term trend analysis - Combine with other technical indicators for confirmation - Adjust the MA period based on your trading style and timeframe ## Technical Details - Built with Pine Script v6 - Overlay indicator (displays on main chart) - Optimized for performance - Compatible with all TradingView chart types --- **Note**: This indicator is for educational and informational purposes only. Always conduct your own analysis and risk management before making trading decisions.
Indicatore Pine Script®
di mychaelgo
Info de Vela 1m1-Minute Candle Info Dashboard (Real-Time) Overview This is a lightweight, real-time dashboard designed specifically for 1-minute (1m) scalping. It provides critical, non-lagging data about the current 1-minute candle, helping you make split-second decisions on stop-loss placement and risk assessment.The table updates on every tick without flickering or repainting. Key Features (Real-Time Table) The dashboard displays three key metrics about the current 1m candle:Time Remaining: A simple countdown timer showing the exact seconds remaining until the current candle closes (e.g., "00:34").Dist. to Extreme (Ticks): This is the core function for scalping. It calculates the distance (in ticks) from the current price to the furthest extreme of the candle (i.e., max(high - close, close - low)). This is ideal for traders who base their stop-loss on the current candle's range.Total Candle Range (Ticks): Displays the full high-to-low range of the current candle in ticks, giving you an instant read on volatility. How to Use This tool is designed to solve one problem: speed.Instead of manually measuring the distance for your stop-loss on every candle, you can instantly read the exact tick value from the table. This allows you to calculate your position size (lotage) much faster, which is essential in a fast-moving 1m environment. REQUIREMENT:This indicator is designed to work ONLY on the 1-minute (1m) timeframe. It will display an error and show no data on any other chart.
Indicatore Pine Script®
di igng44
Pivots 15m en 1mThis script is designed for scalpers and day traders who base their entries on low timeframes (like 1m) but reference liquidity levels from higher timeframes (HTF), in this case, 15m.Key Features:HTF Pivots on LTF: It calculates swing highs and swing lows (pivots) from the 15m chart and projects them as horizontal rays onto your 1m chart.Real-Time Mitigation: The rays (representing pending liquidity) are automatically deleted on the 1m candle as soon as the price mitigates (touches or breaks) that level. This allows you to clearly see which levels have already been tested and which have not.Configurable Pivot Strength: Includes an input to define the "Pivot Strength," allowing you to adjust how many candles on each side are needed to confirm a swing point (e.g., a value of 1 creates 3-bar pivots, a value of 2 creates 5-bar pivots, etc.).Info Table: Displays a real-time table with vital information from the current 1m candle:Time remaining until the candle closes.Total range of the candle in ticks.How to Use:This indicator must be loaded exclusively on a 1-minute (1m) chart.Adjust the "Pivot Strength" in the settings according to your strategy (a value of 1 or 2 is recommended).
Indicatore Pine Script®
di igng44
STEVEN Breakout Scalper (M1/M5)# ✅ Checklist for Trading with the Breakout Indicator + VWAP > **Designed for scalping/M5 in crypto using your breakout indicator and VWAP** > Objective: trade only valid breakouts with confirmation and discipline --- ## 🕒 PRE-MARKET / PRE-SESSION **General context** * ☐ Identified major trend (H1 / M15) * ☐ Reviewed relevant news * ☐ Price relative to VWAP: * ☐ Above → LONG bias * ☐ Below → SHORT bias * ☐ DO NOT trade if the price is “crushed” above the VWAP with no direction * ☐ Marked supports and resistances for the day * ☐ Identified liquidity zones / swings --- ## 🎯 ENTRY SETUP (Breakout Setup) **Indicator Conditions** * ☐ Breakout signal appears * ☐ Previous marked line (light blue) was broken with a strong candle * ☐ It is not a false breakout (long wick without body) **Additional Confirmation (minimum 2 of these)** * ☐ Candle close outside the level * ☐ Retest at broken level (pullback) * ☐ Increasing volume * ☐ RSI > 50 for long / < 50 for short * ☐ Trade in favor of VWAP (NOT against VWAP trend) **VWAP Rules** * ☐ Do not trade breakouts against VWAP * ☐ If breakout coincides with bounce in VWAP = strong entry * ☐ Price far from VWAP = take more aggressive partial **Initial Management** * ☐ Stop Loss placed below/above the broken level * ☐ Minimum TP 1:1.5 * ☐ Calculated position size * ☐ No FOMO — if it breaks without me, I let it go --- ## 📈 DURING THE TRADE * ☐ I keep the stop until I see a clear structure Translated with DeepL.com (free version)
Indicatore Pine Script®
di StevenLopez