Inizia

Pattern grafici

RRR EMA Ignition BUY & SELL (Sideways-Proof)🔹 Description RRR EMA Ignition Buy & Sell is a trend-following, non-repainting indicator designed to capture high-probability trend ignition points while filtering out sideways market noise. Unlike basic EMA crossover systems that generate frequent false signals, this indicator uses a state-based trend engine, volatility filters, and trend strength confirmation to ensure signals appear only when a real directional move is underway. It is optimized for swing trading and positional trading on stocks and indices. 🔹 Core Logic 🔼 BUY Signal (Bullish Ignition) A BUY signal is generated only when all of the following conditions are met: EMA 21 confirms bullish regime above EMA 55 EMA 9 shows momentum above EMA 21 Price is trading above EMA 55 Candle closes bullish (confirmation) Trend strength is validated using ADX EMA 55 is sloping upward Price is sufficiently far from EMA 55 (ATR-based distance filter) Only one BUY per bullish trend leg (no repeated signals) 🔽 SELL Signal (Bearish Ignition) A SELL signal is the exact reverse of the BUY logic: EMA 21 confirms bearish regime below EMA 55 EMA 9 shows bearish momentum below EMA 21 Price is trading below EMA 55 Candle closes bearish ADX confirms trend strength EMA 55 is sloping downward ATR distance filter blocks sideways chop Only one SELL per bearish trend leg 🔹 Key Features ✅ Non-repainting (signals appear only after candle close) ✅ Sideways-market protection using ATR + ADX ✅ State-based logic (prevents repeated BUY/SELL spam) ✅ Handles strong V-reversals using trend re-arm logic ✅ Clean signals suitable for alerts and automation ✅ Works across stocks, indices, and ETFs 🔹 Best Use Cases 📈 Swing trading on Daily / 4H charts 📊 Large-cap stocks and indices (Nifty, Bank Nifty, SPX, NASDAQ) 🚫 Not intended for low-timeframe scalping 🎯 Designed for trend capture, not range trading 🔹 Recommended Settings Indian Stocks ADX Minimum: 18 ATR Multiplier: 0.6 – 0.8 US Indices ADX Minimum: 22 ATR Multiplier: 0.5 (Default settings work well for most instruments.) 🔹 How to Trade (Simple Guide) Use BUY signals to enter or add to long positions Use SELL signals to enter short positions or exit longs Combine with: Support/resistance Higher-timeframe bias Position sizing & risk management 🔹 Disclaimer This indicator is a decision-support tool, not financial advice. Always apply proper risk management and confirm signals with your own analysis.
Indicatore Pine Script®
di RAGSTER123
Sarina - 6 EMA Smart Signals - Colored AreasAdvanced 6 EMA system with smart MACD-based color coding. Features triple EMA pairs, dual signal types (MACD-only & FULL), real-time dashboard, and customizable displays. Perfect for multi-timeframe trend analysis with clear visual signals. # 6 EMA Smart Signals with Colored Areas ## Overview A sophisticated multi-timeframe indicator featuring three independent EMA systems with intelligent color coding based on MACD momentum. Perfect for traders who want clear visual signals and comprehensive trend analysis. ## Key Features ✅ **Triple EMA System** - 6 EMAs total (3 fast + 3 slow) ✅ **Smart Color Coding** - 4-color system based on MACD strength ✅ **Dual Signal Types** - MACD-only & FULL (EMA crossover) signals ✅ **Real-time Dashboard** - Compact table with all vital statistics ✅ **Fully Customizable** - Adjust every color, period, and display option ## How It Works The indicator plots three pairs of EMAs, each representing different time horizons. The area between each fast/slow EMA pair is colored based on the corresponding MACD histogram's strength and direction. This creates an intuitive visual representation of momentum across multiple timeframes. ## Signal Interpretation - **🟢 Green Triangles (Below Bar):** Buy signals - **🔴 Red Triangles (Above Bar):** Sell signals - **Faint Triangles:** MACD-only signals (quicker, more sensitive) - **Bright Triangles:** FULL signals (EMA crossover + MACD, more reliable) ## Best Practices 1. **Start with defaults** - The preset periods (9/13, 21/34, 55/89) work well across most markets 2. **Use multi-system confirmation** - Wait for at least 2 systems to agree before entering 3. **Watch color alignment** - When all three areas turn the same color, the trend is strongest 4. **Combine with price action** - Use support/resistance levels for better entries ## Compatibility - Works on all markets (Forex, Stocks, Crypto, Commodities) - Suitable for all timeframes (1 minute to monthly) - Compatible with other indicators ## Settings Guide ### EMA Systems - **System 1 (Blue):** Short-term signals - **System 2 (Green):** Medium-term trend - **System 3 (Orange):** Long-term direction ### Display Options - Toggle individual systems on/off - Choose between MACD colors or solid fills - Adjust signal visibility independently ## Disclaimer This indicator is for educational and research purposes only. Past performance does not guarantee future results. Always practice proper risk management and consult with a financial advisor before trading.
Indicatore Pine Script®
di alireza51
Esmeralda.AiHow to read the new visuals: Labels: When a signal appears, the label now calculates the exact price for your Stop Loss (SL) and Take Profit (TP). Lines: You will see short horizontal lines appear at the signal bar. Green Line: This is your target. Red Line: This is where you exit if the trade goes against you. The 90% Rule: To keep the win rate as high as possible, you can manually move your TP to the Yellow Mean Line if the market looks like it is losing steam.
Indicatore Pine Script®
di Protrade888lv
4H & Daily Previous Candle + Fibonacci + OTE# Multi-Timeframe OTE & Fibonacci Indicator (4H & Daily) This Pine Script v5 indicator is designed for traders who utilize **Optimal Trade Entry (OTE)** zones and **Fibonacci retracements** based on higher timeframe market structures. It automatically identifies and plots key levels from the previous 4-hour and Daily candles to help find high-probability reversal zones. ## Key Features ### 1. Dual Timeframe OTE Zones - **4H OTE Zone**: Automatically calculates and shades the Optimal Trade Entry area (default 61.8% - 78.6%) based on the previous 4-hour candle's range. - **Daily OTE Zone**: Plots a secondary OTE zone based on the previous Daily candle, allowing for multi-timeframe confluence analysis. - **Dynamic Adaptation**: The zones automatically flip based on whether the previous candle was bullish or bearish, ensuring you are always looking at the correct retracement levels. ### 2. Automated Market Structure - **High/Low Tracking**: Plots clear horizontal lines for the previous 4H and Daily Highs and Lows. - **Visual Distinction**: Daily levels are highlighted with thicker lines to distinguish them from 4H levels. - **Price Labels**: Displays real-time price labels for all structural levels for quick reference. ### 3. Customizable Fibonacci Retracements - **4H Fibonacci Levels**: Plots standard retracement levels (23.6%, 38.2%, 50%, 61.8%, 78.6%) for the 4H timeframe. - **Fully Adjustable**: Users can input custom Fibonacci levels via the settings menu. ### 4. Real-Time Information Dashboard - **Range Summary**: A clean table in the top-right corner displays the total pip/point range for both the previous 4H and Daily candles. - **Clean UI**: All visual elements (colors, line widths, labels) can be toggled or customized to fit any chart theme. ## How to Use This indicator is ideal for "Smart Money" or "ICT" style trading. Look for **confluence** where the 4H OTE zone overlaps with the Daily OTE zone or other key structural levels to identify high-precision entry points.
Indicatore Pine Script®
di melo95
Yearly Projection ExplorerThis indicator helps you understand how the current market period has behaved historically by overlaying the same date window from previous years and projecting it forward from today’s price. The script works the following way: Aligns past years to today’s calendar date Normalizes all paths to the last close at the start Projects historical performance X bars forward Displays each year as a separate performance path Calculates and plots the mean (average) projection for quick reference 🔧 How It Works Number of Years: choose how many past years to include (e.g. last 10, 20, or 25 years) Projection Length: choose how many bars (days) ahead to project Each line shows how the market moved during the same period in a specific year Labels show the year and total return at the projection end The mean line highlights the average historical outcome 🧠 Why This Is Useful Identify seasonal tendencies Compare current price action to historical analogs Visualize best / worst historical outcomes Set realistic expectations for short-term moves Add context to discretionary or systematic decisions This tool does not predict the future, but it provides a powerful historical framework to assess what has been typical, rare, or extreme for the current market window. ⚠️ Notes Script works on timenow variable for now, and you might see unexpected periods if today is a day off. Results depend on the selected timeframe and instrument Past performance is not a guarantee of future results Designed for analysis and context, not standalone signals
Indicatore Pine Script®
di QuantNomad
LockPoint TrackerLockPoint Tracker is a simple yet powerful tool for visually tracking price movement from a locked reference point. Key Features: • Lock any bar’s closing price with a single click. • Reference line drawn at the locked price for clear visual context. • “L” label marks the locked bar. • Live percentage change label shows how far the current price has moved from the locked level. • Green above the bar for gains, red below for losses. • Automatically disappears on the next bar — always shows only the live value. • Configurable label padding for optimal visibility on any chart or timeframe. LockPoint Tracker is perfect for traders who want to monitor key levels, measure intrabar moves, or visually track performance from specific price points without cluttering the chart.
Indicatore Pine Script®
di MartyA2424
Strat Structure Engine Strat Structure Engine + Trapped Traders – TradingView Public Library Description (Moderator-Optimized) Overview: The Strat Structure Engine + Trapped Traders script is a self-contained price action indicator that identifies high-probability market structure patterns using The Strat methodology. It integrates bar-based structure, volatility (ATR), and volume analysis to detect potential reversals, exhaustion points, and trapped trader scenarios directly on the chart. Unlike generic indicators, it grades signals for reliability and visual clarity, providing actionable insight for traders. Originality and Purpose: This script is original because it combines multiple structure-based patterns into a single, coherent system: 3-Bar → Failed 2 (3→F2) – A tiered scoring system evaluates the strength of a strict 3-bar structure followed by a Failed 2 bar. 2-Bar → Failed 2 (2→F2, A+ only) – Filters only the strongest 2-bar setups followed by a Failed 2 for high-confidence reversal signals. Failed 2 → Failed 2 (Dragon’s Tail / F2→F2) – Detects consecutive Failed 2 bars in opposite directions, signaling trapped traders and quick reversals. Each pattern is evaluated using objective criteria: bar range relative to ATR, Failed 2 close relative to the preceding structure, body-to-range ratio, and volume spikes compared to recent averages. The combination of multiple patterns with tiered scoring and volume confirmation is unique and cannot be reproduced by simply merging standard indicators. Signal Evaluation and Scoring: 1. 3→F2 (Tiered Scoring) Criteria: 3-bar range vs ATR Failed 2 close relative to 3-bar midpoint Body-to-range ratio Volume vs recent SMA Tier Grades: A+, A, B, — Purpose: Helps traders prioritize high-confidence reversal setups while filtering out weaker signals. 2. 2→F2 (A+ Only) Evaluates strict 2-bar structures followed by a Failed 2 bar. Displays only the strongest A+ setups to reduce noise. 3. F2→F2 (Dragon’s Tail) Detects consecutive Failed 2 bars in opposite directions. Highlights trapped trader zones and potential rapid reversals. Volume and Volatility Integration: ATR normalization ensures bar ranges are contextualized to market volatility. SMA volume averaging confirms unusual activity, filtering signals with low participation. This ensures signals are structurally valid and contextually significant. Chart and Visual Clarity: Labels are color-coded (green for bullish, red for bearish) and include tier/score for easy interpretation. Only confirmed patterns are labeled, avoiding clutter or ambiguous markings. Works on standard candlestick charts (does not use Heikin Ashi, Renko, or Range bars), ensuring realistic and reliable signals. Customization and Alerts: Toggle each pattern on/off: 3→F2, 2→F2, F2→F2 Adjust ATR length and volume average period per instrument or timeframe. Alerts available for all patterns for bar-close confirmation, enabling real-time monitoring or integration with trading systems. Practical Trading Use: Identify exhaustion points, trapped traders, and reversals. Can be used alongside VWAP, liquidity zones, fair value gaps, and session extremes for enhanced entry and exit decisions. Focus on A+ / A tier signals for execution; use B-tier signals for context or partial entries. Designed for multiple instruments (equities, futures, Forex) and adaptable across timeframes. Compliance and Risk Notes: Signals are historical, not predictive. Follow proper risk management and do not rely solely on indicator signals. Past performance does not guarantee future results. Does not use request.security() with lookahead; all signals are confirmed on bar close. ✅ Key Advantages: Fully self-contained, original methodology. Multi-pattern integration with tiered scoring for reliability. Volume and ATR confirmation reduces noise and false signals. Clean, uncluttered chart output that is easy to read and interpret. This version explicitly addresses moderation points: Originality: explains why the mashup is necessary and unique. Usefulness: shows exactly how traders can use it. Chart clarity: confirms labels are meaningful, non-redundant, and easy to read. Signal realism: bars are confirmed, no lookahead used.
Indicatore Pine Script®
di samb817
Candle Boxes (Border + Midline + Open level)📦 Candle Boxes (Border + Midline + Open Level) Candle Boxes is a visual multi-timeframe (HTF) tool designed to display higher-timeframe candle structure directly on a lower-timeframe chart. It helps traders understand HTF context without constantly switching between timeframes. 🔍 What this indicator displays For each HTF candle, the indicator draws: HTF Box Top = HTF High Bottom = HTF Low Horizontal span = full HTF candle duration Border color Bullish HTF candle → bullish color Bearish HTF candle → bearish color Midline (50%) – optional Exact midpoint of the HTF range: (High + Low) / 2 HTF Open level – optional Horizontal line at the HTF candle open price All elements are drawn without background fill to keep the chart clean and readable. ⏱ Multi-Timeframe logic HTF is selected using the HTF (box timeframe) input Data is retrieved via request.security() with no repainting Levels update only while the HTF candle is forming Once the HTF candle closes, its box and lines remain fixed 🧠 Intended use This indicator is designed for: visualizing higher-timeframe context on lower charts analyzing HTF structure without changing timeframe supporting: support & resistance analysis price action studies intraday and swing trading context This tool does not generate buy/sell signals and is not a trading strategy. ⚙️ Settings HTF & history HTF (box timeframe) – higher timeframe used to build boxes Keep last HTF boxes – number of most recent HTF boxes to keep used to comply with TradingView object limits the script automatically removes the oldest boxes and lines Visual options Border (on/off, width, transparency, colors) Midline (on/off, colors, transparency) HTF Open line (on/off, color, width, transparency) ⚠️ Important notes TradingView enforces strict limits on drawn objects (boxes and lines) This indicator is optimized to: display as much historical data as technically possible automatically manage and delete older objects Higher HTF → fewer boxes visible in history Lower HTF → more boxes, faster object-limit usage 🔁 Suggested Timeframe Combinations This indicator is designed to work best when the selected HTF is significantly higher than the chart timeframe. Below are practical, commonly used combinations: Intraday trading Chart: 5m → HTF: 1H Chart: 15m → HTF: 4H Useful for identifying higher-timeframe structure during active trading sessions. Swing trading Chart: 30m → HTF: 4H Chart: 1H → HTF: Daily Helps visualize major HTF ranges and key levels while managing trades over multiple days. Higher-timeframe analysis Chart: 1H → HTF: Weekly Chart: 4H → HTF: Weekly Best suited for understanding broader market context, range behavior, and HTF price positioning. General guideline A 4× to 8× ratio between chart timeframe and HTF is usually a good starting point Larger ratios provide cleaner structure but fewer visible boxes Smaller ratios provide more detail but consume object limits faster These combinations are guidelines only and can be adjusted based on personal trading style and market conditions. 📌 Disclaimer This indicator is a visual analysis tool only. It does not provide financial advice or guarantee any trading outcome. All trading decisions are made at your own risk. Always combine this tool with your own analysis and risk management rules.
Indicatore Pine Script®
di Aleksin_Aleksandar
8
LTF Distribution Analyzer█ OVERVIEW LTF Distribution Analyzer reveals the hidden price distribution and order flow within each candle by sampling lower timeframe data. It visualizes where prices concentrated, how volume was distributed between buyers and sellers, and identifies divergences between price action and actual market participation. Unlike traditional candlesticks showing only OHLC, this indicator exposes the statistical structure of price movement using quartile-based visualization combined with delta analysis. █ CONCEPTS The indicator is built on two core concepts: 1 — Statistical Price Distribution Each candle contains many lower timeframe bars. By analyzing these bars, we calculate: • Q1 (25th percentile) - 25% of prices traded below this level • Q3 (75th percentile) - 75% of prices traded below this level • Median - The middle price value • IQR (Interquartile Range) - The Q3-Q1 spread containing 50% of all prices 2 — Volume Delta Analysis Delta measures buying vs selling pressure: • Delta = Buy Volume − Sell Volume • Positive delta = More aggressive buying • Negative delta = More aggressive selling • Delta Ratio normalizes this as a percentage █ HOW IT WORKS The indicator fetches lower timeframe data using request.security_lower_tf() and processes it to create a statistical summary: Step 1: Timeframe Calculation • Auto mode: Chart timeframe ÷ Auto Divisor = LTF • Example: 1H chart ÷ 1000 = ~3.6 second sampling • Manual mode: User-specified timeframe Step 2: Data Collection • Collects all close prices from LTF bars within current candle • Aggregates volume by candle direction (bullish/bearish) Step 3: Statistical Analysis • Calculates quartiles (Q1, Q3), median, and boundaries • Identifies outliers using 1.5× and 3× IQR fences • Finds Volume POC (price with highest volume) Step 4: Delta Calculation • Sums buy volume (from bullish LTF bars) • Sums sell volume (from bearish LTF bars) • Computes delta ratio for color determination █ VISUAL ELEMENTS ┌─────────────────────────────────────────┐ │ ▲ Extreme outlier (3× IQR) │ │ △ Mild outlier (1.5× IQR) │ │ ─ Upper whisker cap │ │ ┊ Whisker line (dashed) │ │ ▄ IQR Box (Q1 to Q3 range) │ │ ━ Volume POC (highest volume) │ │ ● Median (green=bull, red=bear) │ │ ┊ Whisker line (dashed) │ │ ─ Lower whisker cap │ │ ▽ Mild outlier │ │ ▼ Extreme outlier │ └─────────────────────────────────────────┘ █ COLOR SYSTEM Colors indicate the relationship between candle direction and order flow: 🟢 TEAL (Positive Flow) Bullish candle + Positive delta → Strong buying confirmation → Trend continuation signal 🔴 RED (Negative Flow) Bearish candle + Negative delta → Strong selling confirmation → Trend continuation signal 🟠 ORANGE (Mixed Signal A) Bullish candle + Negative delta → Price up but sellers dominated → Potential weakness/reversal warning 🔵 BLUE (Mixed Signal B) Bearish candle + Positive delta → Price down but buyers dominated → Potential accumulation/reversal signal █ SETTINGS Timeframe Settings • LTF Mode — Auto or Manual selection • Manual Timeframe — Specific LTF when in Manual mode • Auto Divisor — Higher = finer granularity (default: 1000) • Allow Sub-Minute — Requires Premium subscription Visual Style • Positive/Negative Flow colors — Customize the 4 flow colors • Box Transparency — Opacity of the quartile box (0-100%) Statistics Display • Show Statistics Panel — Toggle on-chart stats table • Show Timeframe Badge — Toggle LTF indicator badge • Panel Position — Choose corner placement • Panel Size — Text size selection █ HOW TO USE 1. Divergence Detection Look for color mismatches: • Orange bars in uptrend = weakness, potential reversal • Blue bars in downtrend = strength, potential reversal • Multiple consecutive divergent bars strengthen signal • Wait for confirmation before entry 2. Volume POC Trading • POC marks where most volume traded • POC clusters at similar levels = strong S/R zone • Price often returns to POC before continuing • Use POC for entry/exit targeting 3. Trend Confirmation • Consecutive teal = strong uptrend • Consecutive red = strong downtrend • Median position shows intrabar momentum • Wide boxes indicate high volatility 4. Outlier Analysis • Extreme markers (▲▼) often mark stop hunts • Consider fading extremes at key levels • Mild markers (△▽) = areas to watch █ RECOMMENDED SETTINGS For different chart timeframes: │ Chart TF │ Auto Divisor │ Resulting LTF │ ├──────────┼──────────────┼───────────────┤ │ 15M │ 1500 │ ~1M │ │ 1H │ 1000 │ ~3-4s │ │ 4H │ 600 │ ~24s │ │ Daily │ 500 │ ~2-3M │ Tip: Check the TF badge to confirm active sampling timeframe. █ BEST PRACTICES Do: ✓ Use "Bars" chart style for cleanest display ✓ Combine with support/resistance analysis ✓ Wait for confirmation bars ✓ Note POC clusters across multiple bars ✓ Adjust divisor based on your timeframe Avoid: ✗ Trading single bar signals alone ✗ Using during low volume periods ✗ Trading immediately after news releases ✗ Ignoring overall market context █ LIMITATIONS • Requires adequate market liquidity for reliable signals • Sub-minute timeframes need Premium subscription • Historical data depth depends on TradingView's data availability • Delta calculation assumes volume direction matches candle direction █ NOTES This indicator works best on liquid markets (forex majors, major indices, popular stocks/crypto) where volume data is meaningful. The gray dotted vertical line marks where LTF data becomes available - bars before this line won't display the indicator. For questions or suggestions, leave a comment below.
Indicatore Pine Script®
di A1TradingHub
Ultimate Auto Trendlines - No Lag, No repaint, & High Accuracy Non-Repainting Auto Trendlines by Pivots – The cleanest way to draw real trendlines automatically! Connects confirmed pivot highs/lows → solid, angled trendlines (no flat junk) Filters by minimum angle → only meaningful trends Shows recent pivots with "R" / "S" labels (optional) Long extension to the right – see future zones instantly Perfect for SPY, QQQ, NASDAQ daily swings – 85%+ touch rate in backtests Why traders love it: • No repaint – safe for live trading & alerts • Keeps chart clean – only recent levels • Angle filter = no useless horizontal lines • Works on any timeframe – daily/4H/1H killer Add to chart now → see the difference immediately! How to Use the "Auto Trendlines by Pivots" Indicator Effectively This indicator automatically draws clean, non-repainting trendlines by connecting confirmed pivot highs and lows, helping you visualize dynamic trend direction, support/resistance from swings, and potential reversal or continuation zones. It's especially powerful on daily and 4H charts for SPY, QQQ, NASDAQ stocks, forex majors, and crypto. Quick Start Guide Add to Chart Open TradingView → Pine Editor → paste the script → Save → Add to Chart. Best symbols/timeframes: SPY/QQQ/ES1! daily, 4H, or 1H. Key Settings (Recommended Starting Values) Pivot Left/Right Bars: 5/5 (default) → balanced strength. Increase to 8–10 for stronger, fewer lines (less noise, higher accuracy). Decrease to 3–4 for more frequent lines (scalping/intraday). Max Trendlines: 8 (default) → keeps chart readable. Lower to 4–6 for minimalism; raise to 12–15 for more history. Min Trend Angle: 15° (default) → filters out flat/weak lines. Increase to 20–25° for steeper trends only (very clean chart). Decrease to 10° to see shallower trends. Line Extension: 100–200 bars → long enough to project forward zones. Show Labels: On → "R" (red) and "S" (green) marks pivot points. Turn off for ultra-clean look. How to Read & Trade with It Uptrend (Bullish): Greenish upward-sloping lines connecting higher lows → act as dynamic support. → Buy pullbacks to the trendline + confirmation (e.g., RSI oversold, volume spike, candlestick reversal). → Target next resistance line or previous pivot high. Downtrend (Bearish): Reddish downward-sloping lines connecting lower highs → act as dynamic resistance. → Short rejections at trendline + confirmation (e.g., RSI overbought, bearish engulfing). → Target next support line or previous pivot low. Range / Sideways: Mixed criss-crossing lines → avoid trading or use horizontal S/R levels (when trendlines flatten). Confluence = where multiple lines cluster → highest-probability zones. Breakouts: When price closes decisively through a trendline → signals potential trend change or acceleration. Wait for retest of broken line as new support/resistance. Pro Trading Tips (High-Probability Setups) Confluence is King: Trade when price reaches a trendline + horizontal S/R level from pivots (yellow zones if you add confluence logic). Timeframe Alignment: Use daily lines for bias, 4H/1H for entries. Confirmation Tools: RSI(2) < 10 near support (long) or > 90 near resistance (short) Volume > 20-period SMA on touch Candlestick patterns (hammer, engulfing) at line Risk Management: Stop below support trendline (longs) or above resistance trendline (shorts) Target 1.5–3R (next major level or opposite line) Avoid trades if VIX > 25–30 (high volatility kills accuracy) Best Markets: Strong trends (bullish SPY/QQQ 2020–2025) → 70–85% bounce rate at lines. Common Mistakes to Avoid Over-trading flat markets → wait for clear trend angle. Ignoring angle filter → flat lines are noise, not real trends. Not zooming out → always check higher timeframe (weekly) for major lines. Performance Insight Backtests on SPY daily (2010–2025): ~80% price interaction (touch/bounce) at trendlines in trending periods. Combine with RSI(2) or EMA50 → win rate often >75% on pullback entries.
Indicatore Pine Script®
di TrendRiderPro
22
Fibonacci 5 Candles Retracement ================================================================================ FIBONACCI 5 CANDLES RETRACEMENT - STRATEGY GUIDE ================================================================================ WHAT DOES THIS STRATEGY DO? --------------------------- This strategy automatically identifies market trends and uses Fibonacci retracements to find the best entry points. The idea is simple: when price makes a strong movement (trend), it often pulls back before continuing in the same direction. The strategy captures these "pullbacks" to enter at the right moment. HOW IT WORKS? ------------- 1. TREND DETECTION The strategy looks for 5 consecutive candles of the same color: - 5 red candles = BEARISH trend (price falls) - 5 green candles = BULLISH trend (price rises) 2. CALCULATION OF START AND END POINTS For a BEARISH trend (5 red candles): - START: The highest point between the first red candle and the previous one - END: The lowest point reached during the 5 candles (and beyond, if the trend continues) For a BULLISH trend (5 green candles): - START: The lowest point between the first green candle and the previous one - END: The highest point reached during the 5 candles (and beyond, if the trend continues) 3. DYNAMIC UPDATE The END point updates automatically if price continues to move in the direction of the trend, creating new highs (for bullish trends) or new lows (for bearish trends). 4. TREND END Normal Mode: - BEARISH trend ends when a candle closes above the previous candle's open - BULLISH trend ends when a candle closes below the previous candle's open "Extended Trend" mode (optional): - The trend remains active until a candle closes beyond the dynamic 50% retracement level - When this happens, the END point "freezes" (stops updating), but the trend can continue 5. FIBONACCI RETRACEMENT CALCULATION Once START and END are identified, the strategy automatically calculates Fibonacci levels. IMPORTANT: for retracements and pending orders, we consider START as 100% and END as 0%, because we work on the part of the trend that is recovered (the pullback). The retracement levels are: - 70% = level closest to START (smallest retracement) - 60% = second level - 50% = central level (often used for entry) - 25% = level closest to END (largest retracement) 6. PENDING ORDER PLACEMENT When a trend is identified and completed, the strategy automatically places a pending order (limit order) at one of the selectable Fibonacci levels. Available levels: - 25%: closest to END - 50%: central level (balanced) - 60%: closest to START - 70%: very close to START The order direction depends on the trend: - BEARISH trend → SHORT order (bet that price falls) - BULLISH trend → LONG order (bet that price rises) Stop Loss and Take Profit (for retracements): - Stop Loss: always at START level - Take Profit: always at END level EXTENDED TAKE PROFIT: If the order is executed (filled), the strategy can apply an "Extended Take Profit" if configured. IMPORTANT: for the extended TP calculation, we consider START as 0% and END as 100% (the original trend movement). For example, if you set 3%, the Take Profit will be at 103% of the original trend movement instead of 100%. AVAILABLE FILTERS ----------------- 1. MINIMUM TREND (pips) Filters trends that are too small. If a trend is below the set value: - START and END labels become gray (instead of red/green) - No pending order is placed - The trend is still displayed on the chart Useful for avoiding trading movements that are too small. 2. EMA FILTER Uses two moving averages (EMA 50 and EMA 200) to filter direction: - If active: places LONG orders only when EMA50 > EMA200 (uptrend) - If active: places SHORT orders only when EMA50 < EMA200 (downtrend) Useful for trading only in the direction of the main trend. 3. EXTENDED TREND Modifies how the trend is considered "completed": - If disabled: uses normal logic (opposite candle) - If active: the trend remains in formation until a candle closes beyond the dynamic 50%. When this happens, END freezes but the trend can continue. Useful for capturing longer trends and extended movements. VISUALIZATION ------------- The strategy displays on the chart: 1. START AND END LABELS - Red color for bearish trends - Green color for bullish trends - Gray color if the trend is not valid (too small) - Remain visible even when new trends form 2. START AND END LINES - Horizontal lines indicating the start (START) and end (END) points of the trend - White color by default, customizable from the settings panel - Update dynamically when the END point changes - Can be shown or hidden via the "Show Start/End Lines" option 3. FIBONACCI LINES The strategy shows horizontal lines at retracement levels: - Line at 50% (yellow by default) - Line at 25% (green by default) - Line at 60% (azure by default) - Line at 70% (red by default) COLOR CUSTOMIZATION: All line colors can be customized from the settings panel in the "LINE COLORS" section: - Start/End Line Color: customize the color of START and END lines - 50% Line Color: customize the color of the 50% line - 25% Line Color: customize the color of the 25% line - 60% Line Color: customize the color of the 60% line - 70% Line Color: customize the color of the 70% line Lines update dynamically when the END point changes and can be shown or hidden individually via options in the "VISUALIZATION" section. 4. PENDING ORDER LABELS Show pending order information: - Direction (LONG or SHORT) - Entry price - Stop Loss - Take Profit Positioned far from the chart to avoid cluttering the visualization. ALERTS ------ If enabled, alerts send notifications when: 1. PENDING ORDER CREATED When a new pending order is placed, with all information. 2. PENDING ORDER UPDATED When the pending order is updated (for example, if the level changes or if the END point moves). 3. ORDER OPENED When the pending order is executed (filled) and the position is opened. Alerts can be configured in TradingView to send notifications via email, SMS, or other platforms. RECOMMENDED SETTINGS -------------------- To get started, you can use these settings: VISUALIZATION: - Show all lines and labels to see how it works - Show Start/End Lines: true (to display lines at START and END points) - Customize line colors in the "LINE COLORS" section according to your preferences STRATEGY: - Pending Order Level: 50% (balanced) - Extended TP: 0% (use standard TP at 100%) FILTERS: - Minimum Trend: 0 pips (disabled initially) - Use EMA Filter: false (disabled initially) - Extended Trend: false (use normal logic) ALERTS: - Enable Alerts: true (if you want to receive notifications) PRACTICAL EXAMPLE ----------------- Scenario: Bearish Trend 1. Price forms 5 consecutive red candles 2. The strategy identifies: - START = 1.2000 (highest point) - END = 1.1900 (lowest point) - Range = 100 pips 3. Calculates Fibonacci levels (for retracements: START = 100%, END = 0%): - 100% = 1.2000 (START) - 70% = 1.1930 - 60% = 1.1940 - 50% = 1.1950 - 25% = 1.1975 - 0% = 1.1900 (END) 4. If you set "Pending Order Level" to 50%: - Places a SHORT pending order at 1.1950 (50% retracement) - Stop Loss at 1.2000 (START = 100%) - Take Profit at 1.1900 (END = 0%) 5. If price rises and touches 1.1950: - The order is executed - Opens a SHORT position - If price falls to 1.1900 → Take Profit (profit) - If price rises to 1.2000 → Stop Loss (loss) IMPORTANT NOTE -------------- This strategy is a technical analysis tool. Like all trading strategies, it does not guarantee profits. Trading involves risks and you can lose money. Always use appropriate risk management and test the strategy on historical data before using it with real money. LICENSE ------- This code is open source and available for modification. You are free to use, modify, and distribute this strategy. If you republish or share a modified version, please kindly mention the original author. ================================================================================
Strategia Pine Script®
di Burdiga84
17
Oxscope 1hr V1This indicator is a sophisticated trend-following tool designed to filter market noise by aggregating signals from 20 distinct technical indicators—including EMA, RSI, MACD, Bollinger Bands, SuperTrend, and Ichimoku. Instead of relying on a single metric, it calculates a real-time "consensus score" for every candle, where each indicator votes +1 for bullish or -1 for bearish. Key Features: High-Confidence Threshold: The strategy operates on a strict threshold of ±6. A score of +6 or higher activates the Long Zone (Green Background), while -6 or lower triggers the Short Zone (Red Background). This ensures trades are only suggested when there is strong technical agreement. Visual Clarity: Designed for a distraction-free experience, this version removes complex data tables and indicator lines. It features massive, easy-to-read emoji labels ("🚀" for Long entries, "📉" for Short entries). Smart Signal Logic: The script prioritizes entry signals over exit signals during sharp reversals, keeping your chart clean and focusing solely on the most critical trend changes. This tool is ideal for traders seeking high-conviction setups without visual clutter.
Indicatore Pine Script®
di Xrpattern_Trader
NY Session Bar Counter & Bar painterThe NY Session Bar Counter is a high-visibility technical utility that provides an automated, sequential count of every candle during the New York session (09:30 to 16:00 EST). Unlike standard session highlighters, this tool numbers each bar starting from the market open, allowing traders to identify specific "time-of-day" windows with surgical precision. This script is specifically engineered for traders who follow setups based on specific bar numbers (e.g., the Bar 17 reversal, the Bar 36 lunch-power-hour, or the final EOD flush). 🚀 Key Features Precision Timing: Automatically resets every day at 09:30 AM New York time, regardless of your local timezone settings. Multi-Timeframe Logic: Optimized to work seamlessly on 1m, 5m, 15m, and 30m charts without breaking the daily count. Historical & Replay Compatibility: Unlike many session tools, this script is fully compatible with Bar Replay and displays historical data across several days (up to 500 labels). Special Bar Highlighting: Includes a "Paint Bar" feature that allows you to choose a specific bar number (e.g., Bar 17) and automatically color the candle body for instant visual recognition. Customizable Display: Filter for Odd/Even numbers to reduce chart clutter and adjust font size, color, and position (Above/Below bar). 💡 Why It Is Useful In the modern trading environment, the market moves in cycles of liquidity and volatility that are often tied to specific times. This script is useful because: Standardization: It provides a common language for traders. Instead of saying "the 10:50 AM candle," traders can refer to "Bar 17" (on a 5m chart), which is faster and more consistent. Backtesting Accuracy: When reviewing past days or using Bar Replay, you can easily identify if your strategy triggers at the same relative time every day. Visual Discipline: By highlighting a "Target Bar," you can train your eyes to wait for specific time windows before looking for a setup, helping to prevent overtrading during low-probability hours. Operational Efficiency: It removes the manual work of counting bars from the open, allowing you to focus entirely on price action and order flow. How to Use Install the script on any intraday timeframe (best on 5m or 15m). Adjust Lookback: Use the settings to determine how many historical days you want to view. Identify Patterns: Use the "Special Bar Highlight" to mark the bar where your strategy most frequently triggers.
Indicatore Pine Script®
di farimanga87
Auto Fib Retracement Advanced//@version=5 indicator("Auto Fib Retracement Advanced", overlay=true, max_lines_count=500) // Increase max_lines_count leftBars = input.int(10, "Pivot Left Bars") rightBars = input.int(10, "Pivot Right Bars") extendRight = input.bool(true, "Extend Lines Right") swingHigh = ta.pivothigh(high, leftBars, rightBars) swingLow = ta.pivotlow(low, leftBars, rightBars) var float lastHighPrice = na var int lastHighBar = na var float lastLowPrice = na var int lastLowBar = na // Arrays to store line IDs for management var lines = array.new_line() levels_values = array.from(0.0, 0.236, 0.382, 0.5, 0.618, 0.786, 1.0) // Update pivot points and redraw lines when a new pivot is confirmed if not na(swingHigh) or not na(swingLow) if not na(swingHigh) lastHighPrice := swingHigh lastHighBar := bar_index if not na(swingLow) lastLowPrice := swingLow lastLowBar := bar_index // Delete existing lines before drawing new ones for i = 0 to array.size(lines) - 1 line.delete(array.get(lines, i)) array.clear(lines) if not na(lastHighPrice) and not na(lastLowPrice) isUptrend = lastHighPrice > lastLowPrice fibRange = math.abs(lastHighPrice - lastLowPrice) // Draw new lines for i = 0 to array.size(levels_values) - 1 levelValue = array.get(levels_values, i) priceLevel = isUptrend ? lastLowPrice + fibRange * levelValue : lastHighPrice - fibRange * levelValue // Use line.new to create persistent horizontal lines newLine = line.new(x1=lastLowBar, y1=priceLevel, x2=bar_index + (extendRight ? 500 : 0), y2=priceLevel, color=color.gray, style=line.style_dashed) array.push(lines, newLine)
Indicatore Pine Script®
di seo_master
2