Inizia

Concept

Asian Stop Hunt ModelSTOP HUNT MODEL – STRATEGY DESCRIPTION The Stop Hunt Model is designed to capture high-probability trades by targeting stop-loss liquidity from retail traders at buy-side and sell-side liquidity zones. The strategy focuses on identifying where liquidity is taken during the Asian session, waiting for a Change of Character (CHoCH), and then entering from unfilled orders (Balanced Price Range / Imbalance) in the direction of the dominant IPDA bias. The objective is to trade from engineered liquidity sweeps toward the next logical liquidity pool, while maintaining strict risk control. The model operates primarily on the 5-minute chart, with early confirmation on the 3-minute chart. The Asian Killzone is used to define the initial range, plotting its high and low. Higher-timeframe liquidity from Daily, 4H, and 1H charts is marked in advance to provide directional context. IPDA direction is determined using macro alignment such as global interest rate bias and long-term trend behavior. Once the Asian session concludes, price is expected to sweep either the high or low of the Asian range or the previous day’s high/low. After the liquidity sweep, the market must show a valid CHoCH, confirming a shift in internal structure. Entries are taken only after the formation and retest of a Balanced Price Range (BPR) created by overlapping imbalances. Trades are executed from these imbalance zones, targeting the next liquidity area, with stop loss placed at the most recent swing high or low. This model prioritizes precision over frequency, aiming for fewer trades with higher reward-to-risk ratios, typically 1:3 or better, and a strict daily risk cap. CHECKLIST – STOP HUNT MODEL 1.Mark Asian Killzone High and Low 2.Identify IPDA directional bias for the pair 3.Mark Buy-side and Sell-side liquidity from Daily, 4H, and 1H 4.Wait for a liquidity sweep (Asian High/Low or Previous Day High/Low) 5.Confirm a valid CHoCH 6.Identify a valid BPR (overlapping imbalance) 7.Enter trade from the BPR zone 8.Target the next liquidity pool 9.Place stop loss at the last swing high or low RULES – STOP HUNT MODEL STRATEGY > Always pre-mark Buy-side and Sell-side liquidity on 1D, 4H, and 1H > Asian Killzone must complete by 10:30 AM IST > After Asian close, mark 15-minute timeframe liquidity > Trade only after the market sweeps the Asian session high or low > Align trades with IPDA direction: > Bullish IPDA → Prefer sweep of Asian Low > Bearish IPDA → Prefer sweep of Asian High > CHoCH confirmation is mandatory: > Green CHoCH for bullish setups > Red CHoCH for bearish setups Setup conditions: 1. Bullish: CHoCH above price + BPR below price 2. Bearish: CHoCH below price + BPR above price 3.BPR must be formed by overlapping imbalances: 4.Red → Green for bullish 5.Green → Red for bearish 6.Look for V-shaped (bullish) or A-shaped (bearish) candle behavior 7.Entry only on imbalance retest — no chase entries 8.Targets must be killzone extremes or next liquidity zone 9.Stop loss must always be at the last swing high or low 10.No manual exits if aiming for 1:3 RR 11.If price sweeps both sides or no clean sweep occurs → No Trade 12.Trade less, execute cleaner setups 13.Daily target: 1% maximum
Indicatore Pine Script®
di jasiremail
3CRGANG - DIVERSIFIED TREND INDICATOROverview The "3CRGANG - DIVERSIFIED TREND INDICATOR" (DTI) is an advanced macro regime tool rooted in Victor Sperandeo’s timeless diversified trend approach, but fully evolved for modern global markets. It evaluates trend breadth and conviction by splitting the financial world into two critical layers: Drivers (Rates, Commodities, FX): Leading macro forces that reflect liquidity, inflation expectations, and dollar dynamics. Participation (US sector equities, Crypto, Emerging Markets): Risk assets that either confirm the macro signal through broad involvement or reveal dangerous divergences. The indicator delivers normalized scores (-1 to +1) for each layer and offers three modes: Drivers only, Participation only, or Blended overlay. This framework helps traders instantly identify high-conviction regimes, leadership shifts, late-cycle warnings, early recovery signals or cautionary divergences—providing institutional-grade context in a single pane. How It's Built: Core Concepts and Calculations Methodology Trend Determination: Each month, the indicator evaluates more than 30 key continuous futures contracts. It calculates the cumulative percentage price change over recent months and compares it to an exponential moving average (EMA) of the previous monthly returns. The EMA places greater emphasis on more recent data, with weights decreasing steadily for older periods (summing to 100%). An asset is considered: In uptrend when the current cumulative change is at or above the EMA In downtrend when below the EMA Flat (neutral) for energy commodities (Uranium, Oil, Natural Gas) instead of downtrend—to avoid false bearish readings during supply-driven ranging periods. Group scores are combined using balanced weighting: Drivers integrate Rates, a GDP-weighted FX basket, and Commodities (with adaptive handling when energy is neutral). Participation uses inverse-volatility weighting across equities, crypto, and emerging markets to reduce the influence of overly noisy assets. Final DTI values range from -1 (strong bearish breadth) to +1 (strong bullish breadth), with added context based on magnitude, speed of change, and prior direction. Why It's Useful Single-market trends often mislead in interconnected environments. DTI delivers immediate macro clarity: Are rising yields pressuring risk assets? → divergence = caution Is dollar strength suppressing commodities while equities surge? → potential regime shift Is participation narrowing in a mature bull? → late-cycle distribution Traders use it to confirm higher-timeframe bias, detect leadership changes (e.g., commodities leading = inflation), and avoid fighting strong macro drivers without risk-asset confirmation. How to Use It Apply in a separate pane. Select DTI Mode : DRIVERS → classic macro leadership view PARTICIPATION → risk-on/risk-off scope BLENDED → spot alignment vs divergence Choose Output Mode : TABLE → detailed dashboard with icons, weights, contributions, and score cell tooltips explaining current regime (e.g., "RAPID TIGHTENING", "STRONG USD DOMINANCE") HISTOGRAMS → visual comparison with intelligent nesting (weaker bar nests inside stronger when aligned) PLOTS → individual group lines with clustered labels Adjust table position to fit your layout. Interpretation: Scores near ±1 indicate high-conviction regimes; divergences between layers often precede turns. Why It's Unique and Worth Invite-Only Access Many breadth and intermarket tools are available, but few combine classic macro leadership with modern risk-asset participation in one clean system: Sperandeo-inspired macro leadership fused with modern risk-asset participation Custom recency-focused EMA weighting optimized across 30+ diverse contracts GDP-weighted FX basket + inverse-vol participation scaling Energy-specific neutral logic + adaptive commodity redistribution Smart histograms and clear regime tooltips. The result is reliable, low-noise macro context developed to deliver genuine institutional insight. Protecting the exact methodology ensures the edge remains exclusive to dedicated traders who value precision and originality.
Indicatore Pine Script®
di RotemB
Dynamic Band (UA)Dynamic Band — Multi-TF RSI Context Indicator Dynamic Band is a market-structure and context indicator that combines ATR-based dynamic price bands with multi-timeframe RSI signals plotted directly on the chart. Instead of using static levels, the indicator builds adaptive bands around EMA, reflecting real volatility and liquidity behavior. These bands act as dynamic reaction zones, not fixed support or resistance. 🔹 Dynamic Band Structure The indicator forms three adaptive zones: Outer Band – extreme volatility / liquidity exhaustion Mid Band – transition / decision zone Inner Band – mean-reversion and reaction area Each band expands and contracts automatically with ATR, keeping relevance across different market regimes. 🔹 Multi-Timeframe Support Dynamic Bands can be displayed from: the current timeframe up to two higher timeframes (MTF overlays) This allows traders to see HTF structure directly on LTF charts, without switching timeframes. 🔹 RSI Signals on Price RSI is used as a trigger, not a standalone oscillator: Overbought / oversold events are plotted on price, not in a sub-window Signals can be shown for: current timeframe multiple higher timeframes simultaneously Each marker includes its origin timeframe, enabling instant confluence reading 🔹 Signal Anchoring & Clarity RSI markers can be anchored to: candle high / low specific Dynamic Band levels (Inner / Mid / Outer) Markers automatically stack with adaptive spacing, keeping the chart readable even with multiple timeframe signals. 🔹 Designed Use-Cases Dynamic Band is built for: identifying reaction zones instead of exact entries aligning LTF execution with HTF context spotting liquidity extremes and RSI exhaustion avoiding indicator noise and repainting traps 🔹 Key Philosophy Price reacts to zones, not lines. RSI confirms context, not direction. Dynamic Band provides a clean structural framework for discretionary, systematic, and hybrid trading approaches.
Indicatore Pine Script®
di yulche02
Mashrab | Momentum X-Ray Stop guessing if a stock is a "Leader" or a "Laggard." The Mashrab Momentum X-Ray is a professional Heads-Up Display (HUD) that tells you the true strength of any stock in seconds. Designed for serious swing traders and breakout specialists (similar to the styles of Qullamagie, Mark Minervini, and IBD), this tool ignores the noise and focuses on the only things that matter: Relative Strength, Volume Fuel, and Fundamental Health. 🚀 Key Features (What it does) 1. The "Smart" Relative Strength Engine Most indicators blindly compare every stock to the S&P 500. This dashboard is smarter. It automatically scans the stock’s Industry (e.g., Semiconductors, Gold Miners, Regional Banks). It compares the stock’s performance against its specific peers (e.g., NVDA vs. SMH ETF) and the market benchmark (SPY). Green Signal: The stock is beating both the market and its sector. This is a "True Leader." 2. IBD-Style RS Rating (1-99 Scale) Get the "Secret Sauce" of institutional screening directly on your chart. Calculates a weighted performance score: 40% (Last 3 Months) + 20% (6m, 9m, 12m). The Scale: 90–99 (Lime Green): Elite Super-Stock. 80–89 (Green): Strong Leader / Breakout Candidate. < 50 (Red): Laggard / Avoid. 3. Momentum "Fuel" Gauge (RVol) Price moving up is good. Price moving up on massive volume is better. The RVol (Relative Volume) row lights up Yellow or Purple when volume is 1.5x to 3x higher than normal. This detects "Institutional Buying" footprints. 4. "Blue Sky" Detector Instantly see how close the price is to its 52-Week High. Stocks within 5% of their highs (Green) have no "overhead supply" (bag holders) and can run the fastest. 👀 How to Read the Dashboard Top Table (Tactical Momentum) RS vs SPY / Sector: Look for DOUBLE GREEN. This means the stock is the "King of the Hill." RVol: Look for > 1.5x (Yellow). This means big players are entering the trade. Bottom Table (Strategic Context) IBD RS Rating: Look for a score of 80 or higher. ADR (20): Shows the "Average Daily Range" volatility. (e.g., 4.5% means the stock moves ~4.5% a day). Use this to size your position correctly! Industry: Tells you exactly which ETF is being used for comparison (e.g., "Semiconductors (SMH)"). ⚙️ Settings & Customization Benchmark: Change the default SPY to QQQ (for Tech), IWM (for Small Caps), or BTCUSD (for Crypto) to fit your strategy. Lookback: Defaults to 26 Bars (Standard Monthly Momentum), but fully adjustable. Text Size: Make the tables larger or smaller to fit your screen. "Trade the Leaders, Ignore the Laggards."
Indicatore Pine Script®
di highstandart9
Rejection Block Pro+ [TakingProphets]REJECTION BLOCK PRO+ Rejection Block Pro+ detects and plots wick-only sweeps of liquidity (BSL/SSL) and converts them into actionable Rejection Block zones with optional quadrant levels and HTF projection. This tool is built for traders who want clean, rule-based rejection zones that only print when a sweep occurs without a candle body acceptance through the level. ----------------------------------------------------------------------------------------------- IMPORTANT NOTE: ORIGINAL RB INDICATOR VS THIS VERSION ----------------------------------------------------------------------------------------------- We already have an existing Rejection Block indicator published on TradingView. - That original Rejection Block script is being kept live and functioning exactly as it currently does - We are not modifying the legacy logic or changing its behavior - This new script is being released separately as "Rejection Block Pro+" - Pro+ uses different detection logic, object management, and higher timeframe projection behavior Reason: - This update was requested specifically so traders can keep using the legacy RB tool unchanged while also gaining access to a separate RB version with expanded functionality and cleaner HTF logic If you have the old RB saved on your charts: - You can continue using it with no changes - Add Rejection Block Pro+ as a separate indicator when you want the newer behavior ----------------------------------------------------------------------------------------------- CORE CONCEPT ----------------------------------------------------------------------------------------------- Rejection Blocks are created when price sweeps a liquidity level using the wick only. Wick-only sweep definition: - BSL wick sweep (bearish rejection block) - high trades above the level - candle body remains fully below the level - condition: high > level AND max(open, close) < level - SSL wick sweep (bullish rejection block) - low trades below the level - candle body remains fully above the level - condition: low < level AND min(open, close) > level This prevents "accepted" breaks from generating rejection zones and keeps the output strict. ----------------------------------------------------------------------------------------------- WHAT THIS INDICATOR DISPLAYS ----------------------------------------------------------------------------------------------- Current Timeframe Rejection Blocks - Automatically detects BSL/SSL pivot liquidity using ICT-style pivots - Monitors those levels for wick-only sweeps - When a wick-only sweep occurs, a rejection block box is created and extended forward - Boxes invalidate when price breaks the rejection extreme Higher Timeframe Rejection Blocks (HTF Projection) - Optionally projects higher timeframe rejection blocks onto your lower timeframe chart - HTF boxes only form after the HTF candle is confirmed closed (prevents early HTF repaint behavior) - Supports up to 3 HTF sources (ex: 5m / 15m / 1h) - Optional timeframe tag text rendered on each HTF box (bottom-right) Quadrant Levels (0% / 25% / 50% / 75% / 100%) - Optional horizontal levels drawn inside each box - Each level has independent toggles: - show/hide - style (solid/dashed/dotted) - width (thin/medium/thick) - optional label - Designed to support execution models that reference internal retracement levels of the rejection zone ----------------------------------------------------------------------------------------------- MODEL FLOW ----------------------------------------------------------------------------------------------- Step 1: Liquidity Level Detection (Pivot Levels) - A pivot strength setting controls how BSL/SSL levels are formed - More sensitive → more levels → more potential rejection blocks - Strict → fewer levels → higher quality structure levels Step 2: Wick-Only Sweep Validation - When price trades beyond a level: - if wick-only condition is true → create a rejection block - regardless of outcome → the level is removed (prevents repeat triggering) Step 3: Box Creation + Extension - A rejection block box is created using wick + body boundaries - Box extends forward in real-time until invalidated Step 4: Invalidation - Bearish rejection blocks invalidate if price breaks above the rejection extreme - Bullish rejection blocks invalidate if price breaks below the rejection extreme - When invalidated, the box and associated quadrant objects are deleted Step 5: Visibility Control (Noise Management) - Current timeframe: keeps only the closest N bullish and closest N bearish blocks - HTF: per timeframe, keeps only the closest N bullish and closest N bearish blocks - This prevents charts from being flooded with old rejection zones ----------------------------------------------------------------------------------------------- SETTINGS GUIDE ----------------------------------------------------------------------------------------------- General - Swing strength - Sensitive = pivot strength 1 - Normal = pivot strength 3 - Strict = pivot strength 6 - Maximum visible RBs per timeframe - Controls how many bullish and bearish blocks remain visible per HTF source Higher Timeframes - Current Timeframe toggle - If off, disables all current timeframe rejection blocks and clears existing drawings - HTF1 / HTF2 / HTF3 - Enable and choose a timeframe for each projection source - HTF colors - Separate bullish and bearish colors per HTF source - Timeframe label on box - Displays source timeframe tag inside the HTF boxes Visual - Remove box fill - Makes fill invisible while keeping the box border - Quadrants - Master toggle plus per-quadrant toggles for 0/25/50/75/100 Alerts - Enable alerts - Session windows (New York time) - Session 1 / Session 2 / Session 3 - Bullish rejection block alert - Bearish rejection block alert - Alert templates support: - {{symbol}} for ticker - {{tf}} for timeframe tags ----------------------------------------------------------------------------------------------- HOW TO USE (PRACTICAL) ----------------------------------------------------------------------------------------------- - Use Sensitive swing strength if you want frequent rejection zones for scalping - Use Normal for a balanced approach - Use Strict if you only want major structure sweeps Suggested workflows: - LTF execution with HTF rejection block context: - Enable HTF1 (ex: 5m) and HTF2 (ex: 15m) - Keep max visible RBs per timeframe = 1 or 2 - Use quadrant 50% as your primary reaction/decision level If you want the cleanest chart: - Enable Remove box fill - Leave only 50% or 25/50/75 quadrants enabled - Disable 0% and 100% labels ----------------------------------------------------------------------------------------------- ALERTS ----------------------------------------------------------------------------------------------- Alerts trigger when a new rejection block is created (current TF and/or HTF projections). Alerts can be restricted to session windows using New York time sessions. Notes: - HTF alerts are only produced after HTF bars confirm - This prevents early/partial HTF triggers on lower timeframe charts ----------------------------------------------------------------------------------------------- DISCLAIMER ----------------------------------------------------------------------------------------------- This indicator is provided for educational and analytical purposes only. It does not constitute financial advice. Trading involves risk, and past performance is not indicative of future results. © TakingProphets -----------------------------------------------------------------------------------------------
Indicatore Pine Script®
di TakingProphets
The CISD Model+ | Triton TradesCISD MODEL PRO+ CISD Model Pro+ is a complete model-based execution framework built around the CISD methodology. It is designed to guide traders from higher-timeframe context into lower-timeframe execution by enforcing a strict sequence of conditions rather than producing isolated signals.This indicator focuses on market narrative: liquidity, timing, displacement, and confirmation — all managed automatically to reduce chart noise and decision fatigue. ----------------------------------------------------------------------------------------------- PURPOSE AND SCOPE ----------------------------------------------------------------------------------------------- - Provide full CISD model context from higher-timeframe bias to execution - Track liquidity, timing, and displacement using explicit, rules-based logic - Remove the need to manually monitor multiple model conditions - Automatically manage, age, and invalidate model objects - Preserve clean charts while maintaining full market structure context ----------------------------------------------------------------------------------------------- WHAT THIS INDICATOR DISPLAYS ----------------------------------------------------------------------------------------------- Session Liquidity - Asia session highs and lows - London session highs and lows - Optional forward extension into the trading day - Designed to establish liquidity targets and context, not execution signals Key Opens - Midnight New York open (0:00) - 8:30 New York open - 9:30 New York RTH open - Opens are anchored to New York trading-day boundaries - Labels intelligently merge when multiple opens align at tick precision - Visibility is timeframe-gated to prevent higher-timeframe clutter PO3 / Higher Timeframe Context - Higher timeframe candle overlay - Higher timeframe open projection - Clear HTF labeling with countdown-style behavior - Intended to define macro draw and dealing range context SMT Divergence (Legacy Module) - Detects SMT divergence versus a correlated asset - Uses pivot-based liquidity logic - Only the most recent SMT line persists - Designed strictly as confirmation, not a primary trade trigger CISD Core Logic - Liquidity sweep detection - Directional tracking of the sweep - Mandatory displacement requirement - CISD object creation only after full condition alignment - Automatic extension, aging, cleanup, and invalidation ----------------------------------------------------------------------------------------------- MODEL ----------------------------------------------------------------------------------------------- Step 1: Liquidity Context - Session liquidity and higher-timeframe levels establish draw targets - Nearest buyside and sellside liquidity are identified based on settings Step 2: Liquidity Sweep - Price must take a defined liquidity level - Direction and timing of the sweep are recorded - No setup is considered valid without a sweep Step 3: Displacement Requirement - Price must displace in the opposite direction of the sweep - Displacement must occur within a controlled candle window - Weak or delayed reactions are ignored Step 4: CISD Confirmation - CISD visuals are created only after displacement confirms - The setup is then managed forward in time - Aging and invalidation rules control how long the setup remains active ----------------------------------------------------------------------------------------------- KEY FEATURES ----------------------------------------------------------------------------------------------- Bias Filter - Neutral: display both bullish and bearish CISDs - Bullish: display bullish CISDs only - Bearish: display bearish CISDs only - Designed to align execution with higher-timeframe bias Hide Invalidated Setups - Automatically removes CISDs that fail or break rules - Prevents old or failed structures from polluting the chart Optional Current Timeframe Features - Current timeframe fair value gap delivery logic - Experimental current timeframe liquidity sweep detection - Intended for advanced users refining execution timing Noise Control - Ignore CISDs that form too close together - Reduces over-signaling in choppy or low-quality conditions Higher Timeframe CISDs - Optional HTF CISD detection - HTF CISDs merge into the current timeframe context - Prevents duplicate or stacked structures across timeframes ----------------------------------------------------------------------------------------------- SETTINGS GUIDE ----------------------------------------------------------------------------------------------- General Settings - Bias selection (Neutral / Bullish / Bearish) - Hide invalidated CISDs - Ignore close-proximity CISDs - Enable or disable optional current timeframe logic Session Liquidity - Toggle Asia and London session highs and lows - Extend session liquidity forward if desired Key Opens - Midnight NY - 8:30 NY - 9:30 NY - Timeframe-gated for chart cleanliness PO3 / HTF Settings - Enable higher timeframe candle overlays - Show HTF open projections and labels SMT Settings (Legacy SMT Module) - Enable or disable SMT confirmation - Automatic or manual correlated asset selection - Sensitivity modes: - Sensitive - Normal - Strict - Optional real-time SMT trailing ----------------------------------------------------------------------------------------------- ALERTS ----------------------------------------------------------------------------------------------- CISD Model Pro+ supports alerts across multiple components depending on what is enabled. Common alert use cases: - Liquidity sweep detected (bullish or bearish) - CISD confirmation events - CISD lifecycle events based on model state Notes: - Alerts can be restricted to specific session windows - For best reliability, alerts should be configured to trigger once per bar close ----------------------------------------------------------------------------------------------- HOW TO USE ----------------------------------------------------------------------------------------------- - Begin with Bias set to Neutral while learning the model behavior - Enable Key Opens and Session Liquidity first for pure context - Layer in CISD logic once you understand sweep and displacement behavior - Adjust Ignore Close Proximity CISDs to control setup density - Use SMT divergence strictly as confirmation, not justification ----------------------------------------------------------------------------------------------- TIPS ----------------------------------------------------------------------------------------------- - Execute on lower timeframes while HTF context defines bias - If the chart becomes visually heavy: - Set Bias to your directional plan - Enable Ignore Close Proximity CISDs - Disable optional current timeframe features - Reduce SMT sensitivity to Normal or Strict ----------------------------------------------------------------------------------------------- DISCLAIMER ----------------------------------------------------------------------------------------------- This indicator is provided for educational and analytical purposes only. It does not constitute financial advice. Trading involves risk, and past performance is not indicative of future results. © TakingProphets -----------------------------------------------------------------------------------------------
Indicatore Pine Script®
di TakingProphets
1
SMT Pro+ [TakingProphets] SMT PRO+ SMT Pro+ is a precision Smart Money Technique (SMT) divergence tool built to track TRUE intermarket divergence using synced Buyside/Sellside Liquidity pivots (BSL/SSL) across a correlated pair. Instead of “guessing” divergence off random swings, SMT Pro+ only tracks levels that form on BOTH symbols on the same confirmation bar, then monitors which asset sweeps first. When exactly one side takes the level, the script draws a clean SMT mark on your chart and optionally trails that mark in real-time until it’s confirmed (parked) or invalidated. This creates a clean, rules-based way to see when your chart symbol is diverging from the correlated asset in a way that aligns with ICT concepts. --------------------------------------------------------------------------------------------- PURPOSE AND SCOPE --------------------------------------------------------------------------------------------- - Detect SMT divergence using synced BSL/SSL pivots on a correlated asset pair - Automatic correlated-asset pairing (with manual override) - Adjustable pivot sensitivity to control swing detection aggressiveness - Track SMT in real time (trailing) or only draw once confirmed (parked) - Automatically cap visual clutter with a maximum visible SMT limit - Dedupe overlapping SMT marks so you only keep the “best” signal - Built-in session-based alerting (New York time) - Alerts for: - New SMT detected - SMT confirmed (parked) - SMT invalidated --------------------------------------------------------------------------------------------- WHAT SMT PRO+ IS LOOKING FOR --------------------------------------------------------------------------------------------- SMT (Smart Money Technique) divergence occurs when two correlated markets disagree on sweeping liquidity. SMT Pro+ uses a strict two-step model: - Step 1: Create a paired liquidity level on BOTH assets at the same time - Buyside Liquidity (BSL) = pivot high formed and confirmed on both symbols - Sellside Liquidity (SSL) = pivot low formed and confirmed on both symbols - Step 2: Watch for a sweep mismatch - SMT triggers when EXACTLY ONE of the two assets sweeps the paired level - Once BOTH assets sweep the level, the SMT is invalid (divergence is gone) Bullish vs Bearish context: - Bullish SMT = Sellside sweep divergence (SSL) where one market takes sellside and the other does not - Bearish SMT = Buyside sweep divergence (BSL) where one market takes buyside and the other does not --------------------------------------------------------------------------------------------- CORRELATED ASSET PAIRING --------------------------------------------------------------------------------------------- Correlated Asset modes: - Automatic - Uses built-in mappings when available (ex: NQ ↔ ES, MNQ ↔ MES, GC ↔ SI, etc.) - Manual - Lets you specify the correlated symbol yourself (ex: ES, YM, BTC/ETH pairs, FX pairs, etc.) If Automatic mapping is not available for your symbol, SMT Pro+ falls back to the Manual symbol input. --------------------------------------------------------------------------------------------- PIVOT / LIQUIDITY LEVEL DETECTION --------------------------------------------------------------------------------------------- SMT Pro+ detects liquidity levels using confirmed pivots (pivot highs and pivot lows). Sensitivity setting controls pivot strength: - Sensitive (pivot = 1) - Detects many minor swings - More levels tracked → more SMT signals - Normal (pivot = 4) - Balanced detection for most traders - Strict (pivot = 6) - Detects major swings only - Fewer SMT signals, closer to higher-timeframe style divergences Critical rule: - Levels must form on the SAME confirmation bar on BOTH symbols - No tolerance window is used - This makes SMT Pro+ stricter, cleaner, and more “rules-based” --------------------------------------------------------------------------------------------- REAL-TIME VS CONFIRMED SMT LOGIC --------------------------------------------------------------------------------------------- Real-time SMTs (ON): - When divergence triggers, SMT draws immediately - The diagonal SMT mark trails to new extremes while divergence remains active - Once confirmed (parked), the mark stops trailing Real-time SMTs (OFF): - SMT is tracked silently while divergence is active - It is only drawn once it becomes confirmed (parked) - This reduces noise and keeps the chart extremely clean --------------------------------------------------------------------------------------------- CONFIRMATION (PARKING) & INVALIDATION --------------------------------------------------------------------------------------------- Confirmation (Parked SMT): - If an SMT is active (one asset swept, the other hasn’t) - And a NEW pivot forms on the chart symbol in the same direction: - BSL SMT confirms when a new main pivot HIGH forms - SSL SMT confirms when a new main pivot LOW forms - Once confirmed: - The SMT mark stops trailing - Optional “Confirmed” alert can fire Invalidation rules: - If BOTH assets sweep the same paired level, the SMT is invalid and removed - If an SMT is confirmed (parked) and price later breaks beyond the parked extreme: - The SMT is considered invalid - The mark is deleted and removed Result: - You only keep SMTs that remain logically intact - Invalid SMTs do not clutter your chart --------------------------------------------------------------------------------------------- APPEARANCE SETTINGS --------------------------------------------------------------------------------------------- SMT marks are drawn as clean diagonal lines from the synced liquidity level to the sweep candle extreme. Bullish SMT styling (SSL divergence): - Line color - Thickness (Thin / Medium / Thick) - Line style (Solid / Dashed / Dotted) Bearish SMT styling (BSL divergence): - Line color - Thickness (Thin / Medium / Thick) - Line style (Solid / Dashed / Dotted) Labels: - Optional SMT label at the endpoint - Adjustable label color + size - Optional symbol display: - If enabled, label prints: “SMT w/ ES” (or your correlated symbol short name) - If disabled, label prints: “SMT” Symbol shortening: - Labels automatically shorten futures formats like: - CME_MINI:ES1! → ES - CME_MINI:NQ1! → NQ --------------------------------------------------------------------------------------------- DISPLAY MANAGEMENT (CLEAN CHART MODE) --------------------------------------------------------------------------------------------- Maximum visible SMTs: - Controls how many SMTs remain visible on the chart at once - Set to 1 to only show the most recent SMT Behind the scenes: - SMT Pro+ tracks more than it displays (internal safety caps) - It hides all marks, then re-shows only the most recent SMTs based on creation time Deduping: - If multiple SMT lines end at the same point, SMT Pro+ keeps only ONE: - For BSL SMTs, it keeps the one with the highest start (stronger buyside level) - For SSL SMTs, it keeps the one with the lowest start (stronger sellside level) This prevents stacked duplicates and keeps your signals clean. --------------------------------------------------------------------------------------------- ALERT SYSTEM --------------------------------------------------------------------------------------------- Master toggle: - Enable Alerts turns the whole alert system on/off Session windows (New York time): - Session 1 (default: 09:30–16:00) - Session 2 (optional) - Session 3 (optional) Alert events: - New SMT - Fires when a fresh divergence triggers (exactly one asset swept the paired level) - SMT Confirmed (parked) - Fires when an active SMT becomes confirmed by new pivot formation on the chart symbol - SMT Invalidated - Fires when divergence is resolved (both assets sweep) or a parked SMT breaks its extreme Alert messages: - Fully customizable per event - Alerts automatically append: - Chart symbol - Current timeframe --------------------------------------------------------------------------------------------- BEST USE CASES --------------------------------------------------------------------------------------------- - Confirming divergence between correlated indices (NQ/ES, MNQ/MES) - Confluence with liquidity sweeps, PD arrays, and model-based entries - Cleaner SMT execution by only using synced confirmed liquidity pivots - Higher-quality divergence tracking with optional real-time trailing - “Set and forget” SMT monitoring via session-based alerts --------------------------------------------------------------------------------------------- DISCLAIMER --------------------------------------------------------------------------------------------- This indicator is provided for educational and analytical purposes only. It does not constitute financial advice. Trading involves risk, and past performance is not indicative of future results. © TakingProphets ---------------------------------------------------------------------------------------------
Indicatore Pine Script®
di TakingProphets
Borna Zones EntryThis indicator marks close-based entry signals for DAX / GER40 on the 1-minute timeframe, using two fixed intraday zones: 08:00 candle → Zone 08 09:00 candle → Zone 09 If the zones overlap, an entry is marked on the first candle close breaking the combined zone. If the zones are separated, an entry is marked on the first candle close breaking the 09:00 zone, in the direction of the 08:00 zone. Entries are shown only between 09:00 and 11:00 and only on the first valid breakout (no repeated signals).
Indicatore Pine Script®
di Borna_trading
Borna Zones Entry First Close BreakThis indicator marks close-based entry signals for DAX / GER40 on the 1-minute timeframe, using two fixed intraday zones: 08:00 candle → Zone 08 09:00 candle → Zone 09 If the zones overlap, an entry is marked on the first candle close breaking the combined zone. If the zones are separated, an entry is marked on the first candle close breaking the 09:00 zone, in the direction of the 08:00 zone. Entries are shown only between 09:00 and 11:00 and only on the first valid breakout (no repeated signals).
Indicatore Pine Script®
di Borna_trading
1
Volume Edge Pro[wjdtks255]Volume Edge Pro: Indicator Description Volume Edge Pro is an advanced volume analysis tool designed to identify institutional accumulation and significant supply levels. Unlike standard volume bars, this indicator categorizes trading volume into four distinct types based on price action and historical comparisons, helping traders spot high-probability breakout opportunities. Key Components: Blue Bars (PPV - Pocket Pivot Volume): Indicates institutional accumulation. It appears when up-day volume exceeds the highest down-day volume of the last 10 trading sessions. Green Bars (RGV - Recent Green Volume): Represents strong buying pressure where up-day volume is higher than the 50-period moving average. Red Bars (RRV - Recent Red Volume): Signifies heavy supply or selling pressure where down-day volume is higher than the 50-period moving average. Grey Bars: Represents standard market volume without significant institutional involvement. Trading Strategy (How to Trade) 1. Identifying Accumulation (The Base) Look for multiple Blue Bars (PPV) during a consolidation phase or within a "base." This suggests that "Smart Money" is quietly accumulating shares without significantly driving up the price yet. 2. The Buy Signal The ideal entry point is when the price breaks out of a consolidation resistance level, especially when the breakout is confirmed by a Blue (PPV) or Green (RGV) bar. The presence of PPV signals within the base increases the reliability of the breakout. 3. Overcoming Supply (The RRV Rule) When a Red Bar (RRV) appears, it marks a level of "unconsumed supply." Treat the high of the RRV candle as a resistance level. A bullish reversal or continuation is confirmed only when the price reclaims the high of the RRV day or when subsequent PPVs/RGVs overwhelm the previous selling volume. 4. Risk Management If a massive Red Bar (RRV) appears after a long uptrend and the price breaks below the prior support, it may indicate institutional distribution (selling), signaling a time to exit or tighten stop-losses.
Indicatore Pine Script®
di wjdtks255
Conditions GateNon-directional indicator gating risk and permissions based purely on seasonal calendar patterns and mechanical event window detection without price analysis. --- Key Insights from HUD What to watch: - State: Primary output for permission decisions - SeasonPrior vs State: Difference shows event impact - EventWindow + ActiveEvent: Explains why State changed (seasonal vs event-driven) - RiskMult: Direct risk cap applicable to position sizing - Runner / MarketMaker: Binary permission gates (green = allowed, red = blocked) - ForcedState: If not "—", an override is active (useful for manual testing) Color Logic: - Green: FAVOURABLE state or allowed (1.0 risk, YES permissions) - Orange: NEUTRAL state or event window active (0.5 risk, NO permissions) - Red: UNFAVOURABLE state or blocked (0.25 risk, NO permissions) - Gray: Neutral info (inactive event, no override)
Indicatore Pine Script®
di DSOON1215
E6 Framework Stock Selection only6 Framework – Business Quality Overlay (Market-Derived) E6 is not a trading indicator. It is a market-derived business quality framework designed to objectively shortlist structurally strong companies using price, volume, and volatility behavior over long horizons. This script translates six core pillars of long-term business strength into observable market evidence, without relying on financial statements, analyst opinions, or subjective narratives. What E6 Measures E6 evaluates companies across six independent quality pillars, each inferred strictly from market behavior: Total Addressable Market (TAM) Identifies businesses demonstrating sustained long-term price expansion and broad participation, indicating room for scalable growth. Consistent Growth Confirms structural uptrends using long-term trend alignment rather than short-term momentum. Positive Cash-Flow Behavior Approximates institutional accumulation through volume-supported advances versus declines. Capable Management Assessed via controlled volatility—rewarding businesses that compound steadily rather than erratically. Skin in the Game Filters out distribution-like behavior often seen when insiders or institutions are exiting. Reasonable Valuation Excludes excessively extended price structures to avoid late-cycle participation. Each satisfied pillar contributes 1 point, producing an objective Score from 0 to 6. How to Interpret the Score Score ≥ 5 (E6 ELITE) Indicates rare alignment of multiple long-term quality factors. These are shortlisting candidates, not buy signals. Score 3–4 (WATCHLIST) Partial strength present; requires deeper fundamental and management evaluation. Score < 3 (AVOID) Structural weaknesses outweigh strengths. A Score of 6 is intentionally rare and requires persistence across multiple bars to confirm durability, avoiding false positives. Built-In Risk Awareness Structural Deterioration Alerts Triggered when business quality meaningfully degrades, not on minor fluctuations. Early Pillar Failure Alerts Provide advance warning when core growth or cash-flow behavior weakens. These alerts are designed for review and reassessment, not for trading execution. Best Practices & Usage Guidelines Designed for Daily and Weekly charts only Intended for equities with sufficient liquidity Avoid intraday usage, low-liquidity stocks, and fresh IPOs Use strictly as a filtering and research aid Always combine with: Fundamental analysis Management quality assessment Industry and competitive research Important Disclaimer This tool does not provide buy/sell signals, price targets , or timing guidance. It is not financial advice. E6 is built to answer one question only: “Does the market treat this business like a high-quality compounder?” Final investment decisions remain entirely the responsibility of the user.
Indicatore Pine Script®
di JayeshBoradia
Master Strategy: BTC W1 Mean Reversion [Institutional SOP]Overview This is an institutional-grade Mean Reversion and Range Rotation strategy designed specifically for Bitcoin (BTC/USDT) Perpetual Futures. It operates on the philosophy that liquidity resides at the extremes of the previous week's range (Previous Week High/Low). The strategy looks for false breakouts (Sweeps) followed by a confirmed return to the range (Reclaim), targeting the weekly equilibrium (EQ). Core Logic: The Deviation Play Unlike standard breakout strategies, this indicator hunts for trapped liquidity. Weekly Levels (Fixed): It calculates PWH (Previous Week High) and PWL (Previous Week Low) based on confirmed, closed weekly data. These levels act as the "Box" for the current week. The Sweep: We wait for price to pierce the PWH or PWL (taking liquidity/stops). The script uses a dynamic ATR-based threshold to filter out noise (micro-pokes). The Reclaim (4H Close): A signal is generated ONLY if a 4H candle closes back inside the weekly range shortly after the sweep. This confirms rejection of higher/lower prices. The Entry: The script suggests a Limit Order at the retested level (PWH/PWL) to maximize R:R. Institutional Quality Filters ("Kill Switches") To prevent trading in unfavorable conditions, the script includes strict SOP (Standard Operating Procedure) filters: Trend Filter (ADX): Blocks mean reversion signals if the daily trend is too strong (ADX > 25). Expansion Filter: Blocks signals if price accepted levels outside the range for too long (prevents fighting a true breakout). Weekly Range Filter: Filters out weeks that are statistically too tight (chop) or too wide (expansion). Time Filter: A reclaim must happen within a set number of 4H bars after the sweep (default: 3). Key Features Zero Repainting: Logic is based strictly on closed candles ( , , ). State Machine Logic: Uses internal memory to track sweeps regardless of chart timeframe glitches. Operational Dashboard: Displays current status, countdown to next decision candle (4H close), and exact parameters for the last valid signal (Entry, SL, TP). Unified Alerting: A single "Any function call" alert handles both Long and Short scenarios dynamically. Clean Visuals: Levels are plotted with line breaks to avoid visual clutter between weeks. How to Use Timeframe: Set your chart to 4H. This is crucial as the logic relies on 4H closes. Signals: Wait for the "4H RECLAIM" label. Execution: Place a Limit Order at the suggested Level (PWH/PWL). Stop Loss: Use the calculated SL provided by the indicator (Swing extreme + ATR buffer). Target: TP1 is always the EQ (Equilibrium/Mid-range).
Indicatore Pine Script®
di TheMrD
C2 HTF Detection CRT [MarioLeb]What This Indicator Does: 1. Detects "C2 Sweeps" - Price retesting previous highs/lows then closing back inside the range. 2. Shows HTF Structure - Marks High Timeframe support/resistance zones (C1 ranges). 3. Finds Multi-Timeframe Confluence - When HTF and LTF C2 signals align at same levels. 4. Highlights CRT Cycles - Complete market cycles (C1→C2→C3 pattern). Visual Output: Horizontal lines = C2 sweep levels Colored zones = C1 ranges (key areas) Yellow line = 50% level of C1 range Boxes = CRT cycles (if enabled) CISD lines = Change in supply/demand confirmation Purpose: Identify where higher timeframe structure meets lower timeframe precision - shows where big moves often start. Alert Features: Automated Alerts trigger when: HTF C2 Detected - "Bullish/Bearish HTF C2 Detected on " CRT Cycle Complete - "Bullish/Bearish CRT Cycle Detected on " CISD Confirmed - "HTF CISD Confirmed on " LTF C2 Detected - "Bullish/Bearish LTF C2 vs HTF C1 Detected" Key Alert: Once C2 candle closes inside C1 range after sweeping high/low → Alert fires immediately. Each alert includes: Direction (Bullish/Bearish) Timeframe Mode (Strict/Easy) Pattern type (C2/CRT/CISD) Alert frequency: Once per bar (no spam).
Indicatore Pine Script®
di MarioLeb
3