cd_SMT_Sweep_CISD_CxGeneral
This indicator is designed to show trading opportunities after sweeps of higher timeframe (HTF) highs/lows and, if available, Smart Money Technique (SMT) divergence with a correlated asset, followed by confirmation from a lower timeframe change in state delivery (CISD).
Users can track SMT, Sweep, and CISD levels across nine different timeframes.
________________________________________
Usage and Details
Commonly correlated timeframes are available in the menu by default. Users can also enter other compatible timeframes manually if necessary.
The indicator output is presented as:
• A summary table
• Display on HTF candles
• CISD levels shown as lines
Users can disable any of these from the menu.
Presentations of selected timeframes are displayed only if they are greater than or equal to the active chart timeframe.
From the Show/Hide section, you can control the display of:
• SMT table
• Sweep table
• HTF candles
• CISD levels
• HTF boxes aligned with the active timeframe
________________________________________
SMT Analysis
To receive analysis, users must enter correlated assets in the menu (or adjust them as needed).
If asset X is paired with correlated asset Y, then a separate entry for Y correlated with X is not required.
Four correlation pairs are included by default. Users should check them according to their broker/exchange or define new ones.
Checkboxes at the beginning of each row allow activation/deactivation of pairs.
SMT analysis is performed on the last three candles of each selected HTF.
If one asset makes a new high while the correlated one does not (or one makes a new low while the other does not), this is considered SMT and will be displayed both in the table and on the chart.
Charts without defined correlated assets will not display an SMT table.
________________________________________
Sweep Analysis
For the selected timeframes, the current candle is compared with the previous one.
If price violates the previous level and then pulls back behind it, this is considered a sweep. It is displayed in both the table and on the chart.
Within correlated pairs, the analysis is done separately and shown only in the table.
Example with correlated and non-correlated pairs:
• In the table, X = false, ✓ = true.
• The Sweep Table has two columns for Bullish and Bearish results.
• For correlated pairs, both values appear side by side.
• For undefined pairs, only the active asset is shown.
Example 1: EURUSD and GBPUSD pair
• If both sweep → ✓ ✓
• If one sweeps, the other does not → ✓ X
• If neither sweeps → X X
Example 2: AUDUSD with no correlated pair defined
• If sweep → ✓
• If no sweep → X
________________________________________
HTF Candles
For every HTF enabled by the user, the last three candles (including the current one) are shown on the chart.
SMT and sweep signals are marked where applicable.
________________________________________
CISD Levels
For the selected timeframes, bullish and bearish CISD levels are plotted on the chart.
________________________________________
HTF Boxes
HTF boxes aligned with the active timeframe are displayed on the chart.
Box border colors change according to whether the active HTF candle is bullish or bearish.
________________________________________
How to Read the Chart?
Let’s break down the example below:
• Active asset: Nasdaq
• Correlated asset: US500 (defined in the menu, confirmed in the table bottom row)
• Active timeframe: H1 → therefore, the HTF box is shown for Daily
• Since a correlated pair is defined, the indicator runs both SMT and Sweep analysis for the selected timeframes. Without correlation, only Sweep analysis would be shown.
Table is prepared for H1 and higher timeframes (as per user selection and active TF).
Observations:
• SMT side → H1 timeframe shows a bearish warning
• Sweep side → Bearish column shows X and ✓
o X → no sweep on Nasdaq
o ✓ → sweep on US500
Meaning: US500 made a new high (+ sweep) while Nasdaq did not → SMT formed.
The last column of the table shows the compatible LTF for confirmation.
For H1, it suggests checking the 5m timeframe.
On the chart:
• CISD levels for selected timeframes are drawn
• SMT line is marked on H1 candles
• Next step: move to 5m chart for CISD confirmation before trading (with other confluences).
Similarly, the Daily row in the table shows a Bullish Sweep on US500.
________________________________________
Alerts
Two alert options are available:
1. Activate Alert (SMT + Sweep):
Triggers if both SMT and Sweep occur in the selected timeframes. (Classic option)
2. Activate Alert (Sweep + Sweep):
Triggers if sweeps occur in both assets of a correlated pair at the same timeframe.
Interpretation:
If SMT + Sweep are already present on higher timeframes, and simultaneous sweeps appear on lower timeframes, this may indicate a strong directional move.
Of course, this must be validated with CISD and other confluences.
________________________________________
HTF CISD Levels
Although CISD levels act as confirmation levels in their own timeframe, observing how price reacts to HTF CISD levels can provide valuable insights for intraday analysis.
POIs overlapping with these levels may be higher priority.
________________________________________
What’s Next in Future Versions?
• Completed CISD confirmations
• Additional alert options
• Plus your feedback and suggestions
________________________________________
Final Note
I’ll be happy to hear your opinions and feedback.
Happy trading!
Indicatori e strategie
Elliott Wave [BigBeluga]🔵 OVERVIEW
Elliott Wave automatically finds and draws an Elliott-style 5-wave impulse and a dashed projection for a potential -(a)→(b)→(c) correction. It detects six sequential reversal points from rolling highs/lows — 1, 2, 3, 4, 5, (a) — validates their relative placement, and then renders the wave with labels and horizontal reference lines. If price invalidates the structure by closing back through the Wave-5 level inside a 100-bar window, the pattern is cleared (optionally kept as “broken”) while key dotted levels remain for context.
🔵 CONCEPTS
Reversal harvesting from extremes : The script scans highest/lowest values over a user-set Length and stores swing points with their bar indices.
Six-point validation : A pattern requires six pivots (1…5 and (a)). Their vertical/temporal order must satisfy Elliott-style constraints before drawing.
Impulse + projection : After confirming 1→5, the tool plots a curved polyline through the pivots and a dashed forward path from (a) toward (b) (midpoint of 5 and (a)) and back to (c).
Risk line (invalidator) : The Wave-5 price is tracked; a close back through it within 100 bars marks the structure as broken.
Minimal persistence : When broken, the wave drawing is removed to avoid noise, while dotted horizontals for waves 5 and 4 remain as reference.
🔵 FEATURES
Automatic pivot collection from rolling highs/lows (user-controlled Length ).
Wave labeling : Points 1–5 are printed; the last collected swing is marked b
. Projected i
& i
are shown with a dashed polyline.
Breaker line & cleanup : If price closes above Wave-5 (opposite for bears) within 100 bars, the pattern is removed; only dotted levels of 5 and 4 stay.
Styling controls :
Length (pivot sensitivity)
Text Size for labels (tiny/small/normal/large)
Wave color input
Show Broken toggle to keep invalidated patterns visible
Lightweight memory : Keeps a compact buffer of recent pivots/draws to stay responsive.
🔵 HOW TO USE
Set sensitivity : Increase Length on noisy charts for cleaner pivots; decrease to catch earlier/shorter structures.
Wait for confirmation : Once 1→5 is printed and (a) appears, use the Wave-5 line as your invalidation. A close back through it within ~100 bars removes the active wave (unless Show Broken is on).
Plan with the dashed path : The (a)→(b)→(c) projection offers a scenario for potential corrective movement and risk placement.
Work MTF : Identify cleaner waves on higher TFs; refine execution on lower TFs near the breaker or during the move toward (b).
Seek confluence : Align with structure (S/R), volume/Delta, or your trend filter to avoid counter-context trades.
🔵 CONCLUSION
Elliott Wave systematizes discretionary wave analysis: it detects and labels the 5-wave impulse, projects a plausible (a)-(b)-(c) path, and self-cleans on invalidation. With clear labels, dotted reference levels, and a practical breaker rule, it gives traders an objective framework for scenario planning, invalidation, and timing.
PDT AI✅ Features
Multi-indicator fusion: RSI + MACD + EMA + higher timeframe RSI
Signal strength (%): Each signal gets a confidence score (0–100)
Dynamic ATR-based targets and stops
Alerts: Buy/Sell triggers for real-time notifications
Fully customizable inputs
RSI Divergence ProjectionRSI Divergence Projection
Go beyond traditional, lagging indicators with this advanced RSI Divergence tool. It not only identifies four types of confirmed RSI divergence but also introduces a unique, forward-looking engine. This engine spots potential divergences as they form on the current candle and then projects the exact price threshold required to validate them.
Our core innovation is the Divergence Projection Line, a clean, clutter-free visualization that extends this calculated price target into the future, providing a clear and actionable level for your trading decisions.
The Core Logic: Understanding RSI Divergence
For those new to the concept, RSI Divergence is a powerful tool used to spot potential market reversals or continuations. It occurs when the price of an asset is moving in the opposite direction of the Relative Strength Index (RSI). This indicator automatically detects and plots four key types:
Regular Bullish Divergence: Price prints a lower low, but the RSI prints a higher low. This often signals that bearish momentum is fading and a potential reversal to the upside is near.
Hidden Bullish Divergence: Price prints a higher low, but the RSI prints a lower low. This is often seen in an uptrend and can signal a continuation of the bullish move.
Regular Bearish Divergence: Price prints a higher high, but the RSI prints a lower high. This suggests that bullish momentum is weakening and a potential reversal to the downside is coming.
Hidden Bearish Divergence: Price prints a lower high, but the RSI prints a higher high. This is often seen in a downtrend and can signal a continuation of the bearish move.
Confirmed divergences are plotted with solid-colored lines on the price chart and marked with a "B" (Bearish/Bullish) or "HB" (Hidden Bearish/Hidden Bullish) label.
The Core Innovation: The Divergence Projection
This is where the indicator truly shines and sets itself apart. Instead of waiting for a pivot point to be confirmed, our engine analyzes the current, unclosed candle.
Potential Divergence Detection: When the indicator notices that the current price and RSI are setting up for a potential divergence against the last confirmed pivot, it will draw a dashed line on the chart. This gives you a critical head-start before the signal is confirmed.
The Projection Line (Our Innovation): This is the game-changer. Rather than cluttering your chart with messy labels, the indicator calculates the exact closing price the next candle needs to achieve to make the current RSI level equal to the RSI of the last pivot.
It then projects a clean, horizontal dashed line at this price level into the future.
Attached to the end of this line is a single, consolidated label that tells you the type of potential divergence and the exact threshold price.
This unique visualization transforms a vague concept into a precise, actionable price target, completely free of chart clutter.
How to Use This Indicator
1. Trading Confirmed Divergences:
Look for the solid lines and the "B" or "HB" labels that appear after a candle has closed and a pivot is confirmed.
A Regular Bullish divergence can be an entry signal for a long position, often placed after the confirmation candle closes.
A Regular Bearish divergence can be an entry signal for a short position.
Hidden Divergences can be used as confirmation to stay in a trade or to enter a trade in the direction of the prevailing trend.
2. Using the Divergence Projection for a Tactical Advantage:
When a dashed line appears on the current price action, you are seeing a potential divergence in real-time.
Look to the right of the current candle for the Projection Line. The price level of this line is your key level to watch.
Example (Potential Bullish Divergence): You see a dashed green line forming from a previous low to the current lower low. To the right, you see a horizontal line projected with a label: "Potential Bull Div | Thresh: 10,750.50".
Interpretation: This means that if the next candle closes below 10,750.50, the RSI will not be high enough to form a divergence. However, if the price pushes up and the next candle closes above 10,750.50, the bullish divergence remains intact and is more likely to be confirmed. This gives you a concrete price level to monitor for entry or exit decisions.
How the Projection Engine Works: A Deeper Dive
To fully trust this tool, it's helpful to understand the logic behind it. The projection engine is not based on guesswork or repainting; it's based on a precise mathematical reverse-engineering of the RSI formula.
The Concept: The engine calculates the "tipping point." The Threshold Price is the exact closing price at which the new RSI value would be identical to the RSI value of the previous pivot point. It answers the question: "For this potential divergence to remain valid, where does the next candle need to close?"
The Technicals: The script takes the target RSI from the last pivot, reverse-engineers the formula to find the required average gain/loss ratio, and then solves for the one unknown variable: the gain or loss needed on the next candle. This required price change is then added to or subtracted from the previous close to determine the exact threshold price.
This calculation provides the precise closing price needed to hit our target, which is then plotted as the clean and simple Projection Line on your chart.
Features and Customization
- RSI Settings: Adjust the RSI period and source.
- Divergence Detection: Fine-tune the pivot lookback periods and the min/max range for detecting divergences.
- Price Source: Choose whether to detect divergences using candle Wicks or Bodies.
- Display Toggles: Enable or disable any of the four divergence types, as well as the entire projection engine, to keep your chart as clean as you need it.
Summary of Advantages
- Proactive Signals: Get ahead of the market by seeing potential divergences before they are confirmed.
- Unprecedented Clarity: Our unique Projection Line eliminates chart clutter from overlapping labels.
- Actionable Data: The threshold price provides a specific, objective level to watch, removing guesswork.
- Fully Customizable: Tailor the indicator's settings to match any timeframe or trading strategy.
- All-in-One Tool: No need for a separate RSI indicator; everything you need is displayed directly and cleanly on the price action.
We hope this tool empowers you to make more informed and timely trading decisions. Happy trading
Scalp Nakurviator v1.2 (Public Version)
Summary
Nakurviator - Scalp Signal Indicator
A fast, HTF-aware scalp signal indicator optimized for 15m and 1h timeframes.
Nakurviator combines rapid local momentum/exhaustion signals with higher-timeframe context (1H, 4H, 1D) to produce concise LONG/SHORT scalp alerts and visual invalidation levels.
How it works (high level):
Local components (RSI, MACD, MFI, volume) tuned for fast reaction and exhaustion detection.
HTF proxies (Order Blocks, FVG, MSS) fetched via request.security and converted to weighted contributions.
Composite scoring: components sum to a raw score, optionally normalized to recent activity, and mapped to -100..100 percent.
Event-driven signals: one label per bar, duplicate-reduction, optional stronger-than-previous requirement.
Optional invalidation lines: micro-pivot + ATR buffer with a labeled price level.
Main features:
Fast local signals with exhaustion weighting (RSI/MFI emphasized).
HTF context from 1H/4H/1D with configurable weights.
Order Block and FVG proxies plus MSS/CHoCH detection.
Dynamic scaling to spread signal percentages.
Signal deduplication and clutter reduction (remove similar recent labels).
Invalidation horizontal lines with precise "Invalidation price" label.
Hover tooltip breakdown showing component contributions.
Visualization & UX:
Overlay indicator so signals appear above price.
Labels anchor to bars; invalidation label precision formatted for small prices.
Configurable label offset and ATR-based vertical offset to keep labels visually near lines when zoomed.
Recommended usage
Use on 5m or 15m charts; the indicator warns if used on other timeframes.
Tune `show_threshold` and HTF weights to control signal frequency and HTF bias.
Use invalidation lines as suggested stop/invalid levels combined with your risk management.
//@version=6
indicator("Nakurviator Scalp", shorttitle="NScalp", overlay=true)
// Local + HTF scoring -> combined_percent
Inputs: `min_score`, `show_threshold`, `use_dynamic_scaling`, `h1_weight`, `h4_weight`, `d1_weight`, `inv_atr_mult`, `inv_label_bar_offset`.
CMO For Loop | QuantLapseCMO For Loop Indicator
The CMO For Loop indicator, inspired by Alex Orekhov's, "Chande Momentum Oscillator," and indicator originally made by Tushar Chande, the CMO designed as a fast and responsive tool to capture quick price movements in financial markets. This oscillator leverages Momentum to measure price deviations, providing a concise yet powerful framework for identifying potential trade entry and exit points. What makes this
"enhanced" CMO indicator special is its ability to identify trending periods more accurately. By using thresholds, this allows the script to enter accurate long and short conditions extremely quickly.
Intended Uses:
Used to capture long-term trends:
Used to identify quick reversals:
Recommended Uses
Best suited for higher timeframes (8H+) to improve accuracy of signals.
Designed for strategies that require fast entries and exits.
Can also be applied to scalping approaches.
Not Recommended For
Should not be used as a mean reversion tool.
Should not be interpreted as a valuation indicator (overbought/oversold levels).
Key Features
Rapid Market Reaction
Built to prioritize speed over smoothing, making it ideal for traders who want to take advantage of quick price shifts in trending or highly volatile markets.
Flexible Thresholds
Users can customize the upper and lower CMO levels to trigger long or short conditions, allowing the indicator to adapt to different assets and trading styles.
Embracing the Noise
Signals may appear frequently, but this is intentional. The tool is optimized for traders who thrive on fast rotations, using the “noise” to catch short-lived yet impactful moves.
Clear Visual Feedback
Plots key oscillator levels and provides dynamic, color-coded candles and shapes that make it easy to identify bias and react quickly.
How It Works
Oscillator Calculation
The CMO (Chande Momentum Oscillator) is derived from comparing the source price’s deviations relative to its momentum. This approach emphasizes trend-driven price shifts.
Signal Triggers
When the oscillator rises above the upper threshold, a long bias is triggered and remains until the CMO drops below the lower threshold.
When the oscillator falls below the lower threshold, a short bias is triggered and remains until the CMO crosses back above the upper threshold.
No bias is active when the oscillator is between thresholds.
Visual Signals
Green candles = long bias
Red candles = short bias
Gray candles = neutral/no signal
Triangles mark points of change in signal direction.
🏆 AI Gold Master IndicatorsAI Gold Master Indicators - Technical Overview
Core Purpose: Advanced Pine Script indicator that analyzes 20 technical indicators simultaneously for XAUUSD (Gold) trading, generating automated buy/sell signals through a sophisticated scoring system.
Key Features
📊 Multi-Indicator Analysis
Processes 20 indicators: RSI, MACD, Bollinger Bands, EMA crossovers, Stochastic, Williams %R, CCI, ATR, Volume, ADX, Parabolic SAR, Ichimoku, MFI, ROC, Fibonacci retracements, Support/Resistance, Candlestick patterns, MA Ribbon, VWAP, Market Structure, and Cloud MA
Each indicator generates BUY (🟢), SELL (🔴), or NEUTRAL (⚪) signals
⚖️ Dual Scoring Systems
Weighted System: Each indicator has configurable weights (10-200 points, total 1000), with higher weights for critical indicators like RSI (150) and MACD (150)
Simple Count System: Basic counting of BUY vs SELL signals across all indicators
🎯 Signal Generation
Configurable thresholds for both systems (weighted score threshold: 400-600 recommended)
Dynamic risk management with ATR-based TP/SL levels
Signal strength filtering to reduce false positives
📈 Advanced Configuration
Customizable thresholds for all 20 indicators (RSI levels, Stochastic bounds, Williams %R zones, etc.)
Dynamic weight bonuses that adapt to dominant market trends
Risk management with configurable TP1/TP2 multipliers and stop losses
🎛️ Visual Interface
Real-time master table displaying all indicators, their values, weights, and current signals
Visual trading signals (triangles) with detailed labels
Optional TP/SL lines and performance statistics
💡 Optimization Features
Gold-specific parameter tuning
Trend analysis with configurable lookback periods
Volume spike detection and volatility analysis
Multi-timeframe compatibility (15m, 1H, 4H recommended)
The system combines traditional technical analysis with modern weighting algorithms to provide comprehensive market analysis specifically optimized for gold trading.
Ragazzi è una meraviglia, pronto all uso, già configurato provatelo divertitevi e fate tanti soldoni poi magari una piccola donazione spontanea sarebbe molto gradita visto il tempo, risorse e gli insulti della moglie che mi diceva che perdevo tempo, fatemi sapere se vi piace.
nel codice troverete una descrizione del funzionamento se vi vengono in mente delle idee per migliorarlo contattatemi troverete i mie contatti in tabella un saluto.
Liquidity Swing Points [BackQuant]Liquidity Swing Points
This tool marks recent swing highs and swing lows and turns them into persistent horizontal “liquidity” levels. These are places where resting orders often accumulate, such as stop losses above prior highs and below prior lows. The script detects confirmed pivots, records their prices, draws lines and labels, and manages their lifecycle on the chart so you can monitor potential sweep or breakout zones without manual redrawing.
What it plots
LQ-H at confirmed swing highs
LQ-L at confirmed swing lows
Horizontal levels that can optionally extend into the future
Timed removal of old levels to keep the chart clean
Each level stores its price, the bar where it was created, its type (high or low), plus a label and a line reference for efficient updates.
How it works
Pivot detection
A swing high is confirmed when the highest high has swing_length bars on both sides that are lower.
A swing low is confirmed when the lowest low has swing_length bars on both sides that are higher.
Pivots are only marked after they are confirmed, so they do not repaint.
Level creation
When a pivot confirms, the script records the price and the creation bar (offset by the right lookback).
A new line is plotted at that price, labeled LQ-H or LQ-L.
Rendering and extension
Levels can be drawn to the most recent bar only or extended to the right for forward reference.
Label size and line color/transparency are configurable.
Lifecycle management
On each confirmed bar, the script checks level age.
Levels older than a chosen bar count are removed automatically to reduce clutter.
How it can be used
Liquidity sweeps: Watch for price to probe beyond a level then close back inside. That behavior often signals a potential fade back into the prior range.
Breakout validation: If price pushes through a level and holds on closes, traders may treat that as continuation. Retests of the level from the other side can serve as structure checks.
Context for entries and exits: Use nearby LQ-H or LQ-L as reference for stop placement or partial-take zones, especially when other tools agree.
Multi-timeframe mapping: Plot swing points on higher timeframes, then drill down to time entries on lower timeframes as price interacts with those levels.
Why liquidity levels matter
Prior swing points are focal areas where many strategies set stops or pending orders. Price often revisits these zones, either to “sweep” resting liquidity before reversing, or to absorb it and trend. Marking these areas objectively helps frame scenarios like failed breaks, successful breakouts, and retests, and it reduces the subjectivity of eyeballing structure.
Settings to know
Swing Detection Length (swing_length), Controls sensitivity. Lower values find more local swings. Higher values find more significant ones.
Bars until removal (removeafter), Deletes levels after a fixed number of bars to prevent buildup.
Extend Levels Right (extend_levels), Keeps levels projected into the future for easier planning.
Label Size (label_size), Choose tiny to large for chart readability.
One color input controls both high and low levels with transparency for context.
Strengths
Objective marking of recent structure without hand drawing
No repaint after confirmation since pivots are locked once the right lookback completes
Lightweight and fast with simple lifecycle management
Clear visuals that integrate well with any price-action workflow
Practical tips
For scalping: use smaller swing_length to capture more granular liquidity. Keep removeafter short to avoid clutter.
For swing trading: increase swing_length so only more meaningful levels remain. Consider extending levels to the right for planning.
Combine with time-of-day filters, ATR for stop sizing, or a separate trend filter to bias trades taken at the levels.
Keep screenshots focused: one image showing a sweep and reversal, another showing a clean breakout and retest.
Limitations and notes
Levels appear after confirmation, so they are delayed by swing_length bars. This is by design to avoid repainting.
On very noisy or illiquid symbols, you may see many nearby levels. Increasing swing_length and shortening removeafter helps.
The script does not assess volume or session context. Consider pairing with volume or session tools if that is part of your process.
Dual Channel System [Alpha Extract]A sophisticated trend-following and reversal detection system that constructs dynamic support and resistance channels using volatility-adjusted ATR calculations and EMA smoothing for optimal market structure analysis. Utilizing advanced dual-zone methodology with step-like boundary evolution, this indicator delivers institutional-grade channel analysis that adapts to varying volatility conditions while providing high-probability entry and exit signals through breakthrough and rejection detection with comprehensive visual mapping and alert integration.
🔶 Advanced Channel Construction
Implements dual-zone architecture using recent price extremes as foundation points, applying EMA smoothing to reduce noise and ATR multipliers for volatility-responsive channel widths. The system creates resistance channels from highest highs and support channels from lowest lows with asymmetric multiplier ratios for optimal market reaction zones.
// Core Channel Calculation Framework
ATR = ta.atr(14)
// Resistance Channel Construction
Resistance_Basis = ta.ema(ta.highest(high, lookback), lookback)
Resistance_Upper = Resistance_Basis + (ATR * resistance_mult)
Resistance_Lower = Resistance_Basis - (ATR * resistance_mult * 0.3)
// Support Channel Construction
Support_Basis = ta.ema(ta.lowest(low, lookback), lookback)
Support_Upper = Support_Basis + (ATR * support_mult * 0.4)
Support_Lower = Support_Basis - (ATR * support_mult)
// Smoothing Application
Smoothed_Resistance_Upper = ta.ema(Resistance_Upper, smooth_periods)
Smoothed_Support_Lower = ta.ema(Support_Lower, smooth_periods)
🔶 Volatility-Adaptive Zone Framework
Features dynamic ATR-based width adjustment that expands channels during high-volatility periods and contracts during consolidation phases, preventing false signals while maintaining sensitivity to genuine breakouts. The asymmetric multiplier system optimizes zone boundaries for realistic market behavior patterns.
// Dynamic Volatility Adjustment
Channel_Width_Resistance = ATR * resistance_mult
Channel_Width_Support = ATR * support_mult
// Asymmetric Zone Optimization
Resistance_Zone = Resistance_Basis ± (ATR_Multiplied * )
Support_Zone = Support_Basis ± (ATR_Multiplied * )
🔶 Step-Like Boundary Evolution
Creates horizontal step boundaries that update on smoothed bound changes, providing visual history of evolving support and resistance levels with performance-optimized array management limited to 50 historical levels for clean chart presentation and efficient processing.
🔶 Comprehensive Signal Detection
Generates break and bounce signals through sophisticated crossover analysis, monitoring price interaction with smoothed channel boundaries for high-probability entry and exit identification. The system distinguishes between breakthrough continuation and rejection reversal patterns with precision timing.
🔶 Enhanced Visual Architecture
Provides translucent zone fills with gradient intensity scaling, step-like historical boundaries, and dynamic background highlighting that activates upon zone entry. The visual system uses institutional color coding with red resistance zones and green support zones for intuitive
market structure interpretation.
🔶 Intelligent Zone Management
Implements automatic zone relevance filtering, displaying channels only when price proximity warrants analysis attention. The system maintains optimal performance through smart array management and historical level tracking with configurable lookback periods for various market conditions.
🔶 Multi-Dimensional Analysis Framework
Combines trend continuation analysis through breakthrough patterns with reversal detection via rejection signals, providing comprehensive market structure assessment suitable for both trending and ranging market conditions with volatility-normalized accuracy.
🔶 Advanced Alert Integration
Features comprehensive notification system covering breakouts, breakdowns, rejections, and bounces with customizable alert conditions. The system enables precise position management through real-time notifications of critical channel interaction events and zone boundary violations.
🔶 Performance Optimization
Utilizes efficient EMA smoothing algorithms with configurable periods for noise reduction while maintaining responsiveness to genuine market structure changes. The system includes automatic historical level cleanup and performance-optimized visual rendering for smooth operation across all timeframes.
Why Choose Dual Channel System ?
This indicator delivers sophisticated channel-based market analysis through volatility-adaptive ATR calculations and intelligent zone construction methodology. By combining dynamic support and resistance detection with advanced signal generation and comprehensive visual mapping, it provides institutional-grade channel analysis suitable for cryptocurrency, forex, and equity markets. The system's ability to adapt to varying volatility conditions while maintaining signal accuracy makes it essential for traders seeking systematic approaches to breakout trading, zone reversals, and trend continuation analysis with clearly defined risk parameters and comprehensive alert integration. Also to note, this indicator is best suited for the 1D timeframe.
Market State Momentum OscillatorMarket State Momentum Oscillator (MSMO)
Overview
The MSMO combines three elements in one panel:
Momentum oscillator (gray/blue area with aqua signal line)
Market State filter (green/red background area)
Money Flow Index (orange line)
Works on all markets and all timeframes. Non-repainting at bar close.
Colors and meaning
Gray area: Momentum above 0 (bullish bias)
Blue area: Momentum below 0 (bearish bias)
Aqua line: Signal line smoothing the oscillator
Green background: Market state bullish (price above moving average)
Red background: Market state bearish (price below moving average)
Orange line: Money Flow Index (volume-weighted momentum)
How to use
Always wait for confirmation of the green or red market state before acting.
Trend alignment: Watch the slope of the Weekly and Daily 200 MA and Weekly and Daily 50 MA to understand higher-timeframe trend direction. Trade only in alignment with the broader trend.
Entries:
Long: Green state + gray histogram rising + MFI trending up
Short: Red state + blue histogram falling + MFI trending down
Exits: Histogram crossing back through 0, or state background flips against the position.
Users can add chart alerts on plot crossings if needed.
Inputs
Lengths for oscillator pivot, signal smoothing, state moving average, trend weight, return %, and Money Flow Index. Defaults work for most charts.
Note
Educational use only. Not financial advice.
Tags
trend, oscillator, market state, momentum, money flow, crypto, forex, stocks, indices, futures
[blackcat] L1 Volume-Weighted RSIOVERVIEW
This script implements a Volume-Weighted RSI (VW-RSI) indicator that enhances traditional RSI calculations by incorporating volume data, providing more accurate momentum signals. The indicator plots a yellow VW-RSI line with customizable overbought/oversold levels and visual background coloring. It automatically generates BUY/SELL labels based on sophisticated crossover conditions, making it a powerful tool for identifying potential trend reversals and market entry/exit points. The script uses Wilder's Moving Average for smoothing and supports various price sources for flexible analysis.
FEATURES
📊 Volume-Weighted RSI Calculation: Incorporates trading volume into RSI calculations for more accurate momentum signals
🔧 Customizable Parameters: Adjustable RSI length (1-100), overbought/oversold levels, and price source selection
🎯 Visual Signals: Automatic BUY/SELL labels appear when specific crossover conditions are met
🎨 Visual Enhancements: Color-coded background (red for overbought, green for oversold) and reference lines
📈 Multiple Timeframe Support: Works across different timeframes with a max bars back setting of 5000
🔄 Sophisticated Logic: Combines multiple crossover conditions for reliable signal generation
HOW TO USE
Add to Chart: Add the indicator to your TradingView chart by searching for "L1-VW-RSI"
Configure Settings: Adjust the input parameters in the settings panel:
Price Source: Select your preferred price calculation (hl2 by default)
RSI Length: Set the lookback period (default: 34)
Overbought Level: Set the overbought threshold (default: 70)
Oversold Level: Set the oversold threshold (default: 30)
Interpret Signals:
Watch for BUY labels when the VW-RSI crosses above oversold levels
Watch for SELL labels when the VW-RSI crosses below overbought levels
Confirm with Volume: Pay attention to volume spikes when signals appear for confirmation
LIMITATIONS
The indicator may produce false signals in sideways or low-volume markets
Signals are based on historical price and volume data only
The script has a maximum of 500 labels to prevent performance issues
Wilder's Moving Average calculation may lag significantly during high volatility periods
The crossover logic combines multiple conditions which may occasionally conflict
NOTES
This script is designed for educational and analytical purposes only. Always use proper risk management when trading.
The default RSI length of 34 is optimized for most trading scenarios but can be adjusted based on your trading style.
For best results, combine this indicator with other technical analysis tools and price action confirmation.
The volume-weighted approach provides more reliable signals in high-volume environments.
Market Structure Protected Ranges (JAB)Draws what are considered strong zones based on Market Structure.
Balance & Reversal Indicator [SYNC & TRADE]ndicator Description: "Balance & Reversal Indicator "
Purpose of the Indicator
The "Balance & Reversal Indicator " indicator is designed for analyzing market activity in cryptocurrency and other financial markets. It assists traders in identifying potential trend reversal points, detecting market equilibrium zones, and evaluating the balance between buying and selling volumes. The indicator is suitable for both short-term and long-term trading, offering flexible settings to adapt to various trading styles and timeframes.
What Does the Indicator Provide?
Volume Analysis: Calculates buy and sell volumes, along with the Long/Short Ratio, to assess current market dynamics.
Reversal Signals: Generates signals for potential Long (buy) and Short (sell) reversals based on customizable levels, ranging from "Potential Reversal" to "Maximum Signal."
Equilibrium Zones: Identifies zones where the market is in balance, useful for recognizing neutral market conditions.
Flexible Calculation Methods: Supports four volume calculation methods (Tick Based, Candle Based, Delta Based, Price Movement) to suit different trading approaches.
Auto and Manual Sensitivity: Offers "Auto" mode for timeframe-based sensitivity or "Manual" mode for custom sensitivity settings.
Data Visualization: Displays key metrics (total volume, buy/sell volumes, ratio, and percentages) via a comparison table and on-chart labels for easy interpretation.
Volume Unit Customization: Allows volume display in USDT, Active contracts, or other units for enhanced flexibility.
How to Use the Indicator?
Adding to the Chart:
Find "Balance & Reversal Indicator " in the TradingView library and add it to your chart.
The indicator appears in a separate panel below the chart, keeping price data unobstructed (overlay=false).
Configuring Settings:
Calculation Method: Choose one of four volume analysis methods:
Tick Based: Analyzes price movement within a candle.
Candle Based: Evaluates candle direction (up/down).
Delta Based: Considers the difference between open and close prices.
Price Movement: Assesses movement strength based on candle body and wick sizes.
Sensitivity Mode:
In "Auto" mode, sensitivity adjusts automatically based on the timeframe (e.g., higher for minute charts, lower for daily charts).
In "Manual" mode, set sensitivity manually (from 0.1 to 1.0).
Reversal Levels (Long/Short): Configure levels for Long and Short signals with associated ranges. For example, Long Reversal Level 1 = -30% with a 5% range triggers signals between -35% and -30%.
Equilibrium Levels: Set levels for neutral market zones (e.g., ±7% for Equilibrium Level 1).
Messages: Customize signal messages to align with your trading style.
Analysis Period (Start/End Time): Define the time range for volume calculations.
Volume Unit: Select USDT, Active (active contracts), or Contracts for volume display.
Interpreting Signals:
Comparison Table (Top-Right Corner): Displays analysis results for all four calculation methods (Long/Short Ratio, Buy %, Sell %, Signal), enabling method comparison.
On-Chart Labels: Show total volume, buy/sell volumes, Long/Short Ratio, buy/sell percentages, current method, and sensitivity.
Color-Coded Signals:
Green: Potential Long (buy) opportunity.
Red: Potential Short (sell) opportunity.
Yellow: Market in equilibrium zone.
Chart Levels: Horizontal lines indicate reversal levels (green for Long, red for Short, yellow for equilibrium) with a transparency gradient for clarity.
Applying in Trading:
Use reversal signals to enter positions. For example, a "Maximum Long Signal" may indicate a strong buying opportunity.
Equilibrium zones help avoid trading during low-volatility periods.
Compare methods in the table to confirm signals.
Adjust settings to match your timeframe and asset. For instance, use "Tick Based" with high sensitivity for scalping on minute charts or "Price Movement" with low sensitivity for long-term trading.
Recommendations:
Test the indicator on historical data to optimize settings for your asset and strategy.
Combine indicator signals with other technical analysis tools (e.g., support/resistance levels or trend indicators) for greater accuracy.
Regularly update the time range (Start/End Time) to ensure relevant data analysis.
Who Is This Indicator For?
"Balance & Reversal Indicator " is ideal for traders who:
Trade on cryptocurrency exchanges and want to analyze trading volumes.
Seek reversal points for entering Long or Short positions.
Prefer customizable settings and the ability to compare different analysis methods.
Operate across various timeframes, from minutes to months.
Note: This indicator is not financial advice. Always conduct your own analysis and consider risks before making trading decisions.
© TradingStrategyCourses, 2025. All rights reserved.
Trendline Breakout with TP/SLTRENDLINE BREAKOUT STRATEGY
This indicator provides dynamic trendline detection with comprehensive TP/SL management.
FEATURES:
- Automatic trendline construction using pivot analysis
- Breakout signal detection with volume confirmation
- ATR-based take profit and stop loss calculations
- Support/resistance level integration
- Customizable risk management system
METHODOLOGY:
Uses mathematical pivot point analysis to identify trend patterns and generate trading signals with calculated risk parameters.
TECHNICAL IMPLEMENTATION:
- Custom data structures for efficient line management
- Dynamic slope calculations for trend projection
- Volume oscillator for breakout validation
- Multi-level profit targeting system
DISCLAIMER: Educational purposes only. Past performance doesn't guarantee future results.
EMA Percentile Rank [SS]Hello!
Excited to release my EMA percentile Rank indicator!
What this indicator does
Plots an EMA and colors it by short-term trend.
When price crosses the EMA (up or down) and remains on that side for three subsequent bars, the cross is “confirmed.”
At the moment of the most recent cross, it anchors a reference price to the crossover point to ensure static price targets.
It measures the historical distance between price and the EMA over a lookback window, separately for bars above and below the EMA.
It computes percentile distances (25%, 50%, 85%, 95%, 99%) and draws target bands above/below the anchor.
Essentially what this indicator does, is it converts the raw “distance from EMA” behavior into probabilistic bands and historical hit rates you can use for targets, stop placement, or mean-reversion/continuation decisions.
Indicator Inputs
EMA length: Default is 21 but you can use any EMA you prefer.
Lookback: Default window is 500, this is length that the percentiles are calculated. You can increase or decrease it according to your preference and performance.
Show Accumulation Table: This allows you to see the table that shows the hits/price accumulation of each of the percentile ranges. UCL means upper confidence and LCL means lower confidence (so upper and lower targets).
About Percentiles
A percentile is a way of expressing the position of a value within a dataset relative to all the other values.
It tells you what percentage of the data points fall at or below that value.
For example:
The 25th percentile means 25% of the values are less than or equal to it.
The 50th percentile (also called the median) means half the values are below it and half are above.
The 99th percentile means only 1% of the values are higher.
Percentiles are useful because they turn raw measurements into context — showing how “extreme” or “typical” a value is compared to historical behavior.
In the EMA Percentile Rank indicator, this concept is applied to the distance between price and the EMA. By calculating percentile distances, the script can mark levels that have historically been reached often (low percentiles) or rarely (high percentiles), helping traders gauge whether current price action is stretched or within normal bounds.
Use Cases
The EMA Percentile Rank indicator is best suited for traders who want to quantify how far price has historically moved away from its EMA and use that context to guide decision-making.
One strong use case is target setting after trend shifts: when a confirmed crossover occurs, the percentile bands (25%, 50%, 85%, 95%, 99%) provide statistically grounded levels for scaling out profits or placing stops, based on how often price has historically reached those distances. This makes it valuable for traders who prefer data-driven risk/reward planning instead of arbitrary point targets. Another use case is identifying stretched conditions — if price rapidly tags the 95% or 99% band after a cross, that’s an unusually large move relative to history, which could signal exhaustion and prompt mean-reversion trades or protective actions.
Conversely, if the accumulation table shows price frequently resides in upper bands after bullish crosses, traders may anticipate continuation and hold positions longer . The indicator is also effective as a trend filter when combined with its EMA color-coding : only taking trades in the trend’s direction and using the bands as dynamic profit zones.
Additionally, it can support multi-timeframe confluence (if you align your chart to the timeframes of interest), where higher-timeframe trend direction aligns with lower-timeframe percentile behavior for higher-probability setups. Swing traders can use it to frame pullbacks — entering near lower percentile bands during an uptrend — while intraday traders might use it to fade extremes or ride breakouts past the median band. Because the anchor price resets only on EMA crosses, the indicator preserves a consistent reference for ongoing trades, which is especially helpful for managing swing positions through noise .
Overall, its strength lies in transforming raw EMA distance data into actionable, probability-weighted levels that adapt to the instrument’s own volatility and tendencies .
Summary
This indicator transforms a simple EMA into a distribution-aware framework: it learns how far price tends to travel relative to the EMA on either side, and turns those excursions into percentile bands and historical hit rates anchored to the most recent cross. That makes it a flexible tool for targets, stops, and regime filtering, and a transparent way to reason about “how stretched is stretched?”—with context from your chosen market and timeframe.
I hope you all enjoy!
And as always, safe trades!
TCLC - Multi TimeFrame VWAPVWAP :
VWAP, or Volume Weighted Average Price, is a trading indicator that represents the average price of a security over a specific period, weighted by the volume of trades at each price level. It is calculated by taking the sum of the product of price and volume and dividing it by the total volume for the period. Essentially, VWAP shows the average price at which most trades occurred, giving more weight to prices with higher trading volumes.
The Indicator Plots the VWAP in Daily, WEEKLY , MONTHLY , YEARLY which helps to gauage the trend where the Volume vs Price exists....
SMA-Based Candle Color 60The Trend SMA colors the moving average green when sloping upward and red when sloping downward. Candles are also colored based on whether price is above (green) or below (red) the SMA, making trends easy to spot.
ICT Unicorn Strategy [RoboQuant]What it detects
Structure: uses pivots (ta.pivothigh/low) to build a mini zigzag (A–B–C–D).
“Unicorn” Pattern:
Bull: bullish direction, C below A (protected swing), with a bullish “BRB” candle at B.
Bear: mirrored version.
FVG: searches for a valid gap between candle i and i+2 inside the BRB candle range and greater than 0.05 × ATR (quality filter).
When an FVG appears, it plots boxes/lines (top/bottom of range, protected swing, FVG box).
How it enters
Bull Trigger: a candle opens inside the FVG and closes above the top of the FVG (mitigation + continuation).
SL = protected swing (firstBl.swing, pivot C).
TP = top + (top - swing) * (reward/risk).
Draws Risk and Reward boxes if showTargets=true.
Bear Trigger: mirror setup (opens inside FVG and closes below bottom).
Management & sizing
Sizing: calculates position size = riskAmount / SL distance, capped by maxPositionSize.
RR configurable with risk and reward (default 1:2).
Trailing optional: adjusts TsL using short pivots (lenS).
Trade closes at SL (break of swing) or TP (target reached).
combine: if false, a bull setup cancels a bear setup (and vice versa). If true, both can coexist.
Key parameters
len: pivot sensitivity (structure).
riskAmount and maxPositionSize: risk control.
trail, lenS: trailing logic.
Box colors/visibility (showTargets, colRisk, colReward).
ICT translation
Seeks impulse → FVG → pullback into FVG → expansion, with a protected swing (implicit BOS/MSS via zigzag) and mitigation of imbalance.
The ATR * 0.05 filter avoids micro-gaps without intent.
How I’d use it (quick checklist)
Mark HTF bias (only take bull or bear setups with the trend).
On LTF, wait for a valid FVG inside the BRB candle.
Enter only if a candle re-enters the FVG and closes breaking its edge.
SL at swing C, TP by RR (default 1:2).
Enable trailing only after 1R is reached (optional, tuned via lenS).
FVG TrackerThis indicator automatically detects and tracks Fair Value Gaps (FVGs) on your chart, helping you quickly spot imbalances in price action.
Key Features:
📍 Identifies FVGs larger than 3 contracts
📐 Draws each valid FVG as a rectangle directly on the chart
⏳ Removes FVGs once they are fully filled
🔟 Keeps track of only the 10 most recent FVGs for clarity
⚡ Lightweight and optimized for real-time charting
This tool is ideal for traders who use FVGs as part of Smart Money Concepts (SMC) or imbalance-based strategies. By visually highlighting only meaningful gaps and clearing them once filled, it ensures a clean and actionable charting experience.
GMMA ABC Signal Goal (one-liner)
Detect trend-aligned entries using an 18-EMA GMMA stack, then filter out chop with momentum (ATR), trend strength (ADX/RSI), and a tight-range (“box”) mute. Auto-draw SL/TP and fire alerts.
1) Core inputs & idea
Three entry archetypes
Type A (Structure break in a tight bundle): GMMA is narrow → price breaks prior swing with correct bull/bear sequence.
Type B (Trend continuation): Price crosses many EMAs with body and short>mid (bull) or short midAvg, close > longAvg, candle pass.
Short: red body, crossBodyDown ≥ bodyThresh, shortAvg < midAvg, close < longAvg, candle pass.
Anti-chop add-ons:
Require GMMA spread ≥ minSpreadB (trend sufficiently expanded).
ADX/RSI gate (configurable AND/OR and individual enable flags):
ADX ≥ adxMin_B
RSI ≥ rsiMinLong_B (long) or RSI ≤ rsiMaxShort_B (short)
Type C — momentum pop
Needs many crosses (crossUp / crossDown ≥ crossThresh) and a strong candle.
Has its own ATR body threshold: body ≥ ATR * atrMultC (separate from global).
6) Global “Box” (tight-range) mute
Look back boxLookback bars; if (highest−lowest)/close ≤ boxMaxPct, then mute all signals.
Prevents trading inside cramped ranges.
7) Signal priority + confirmation + cooldown
Compute raw A/B/C booleans.
Pick first valid in order A → B → C per side (long/short).
Apply:
Bar confirmation (confirmClose)
Cooldown (no new signal within cooldownBars after last)
Global box mute
Record bar index to enforce cooldown.
8) SL/TP logic (simple R-based scaffolding)
SL: previous swing extreme within structLookback (long uses prevLow, short uses prevHigh).
Risk R: distance from entry close to SL (min-tick protected).
TPs: TP1/TP2/TP3 = close ± R × (tp1R, tp2R, tp3R) depending on side.
On a new signal, draw lines for SL/TP1/TP2/TP3; keep them for keepBars then auto-delete.
9) Visuals & alerts
Plot labels for raw Type A/B/C (so you can see which bucket fired).
Entry label on the chosen signal with SL/TP prices.
Alerts: "ABC LONG/SHORT Entry" with ticker & timeframe placeholders.
10) Info panel (top-right)
Shows spread%, box%, ADX, RSI on the last/confirmed bar for quick situational awareness.
11) How to tune (quick heuristics)
Too many signals? Increase minSpreadB, adxMin_B, bodyThresh, or enable confirmClose and a small cooldownBars.
Missing breakouts? Lower atrMultC (Type C) or crossThresh; relax minSpreadB.
Choppy pairs/timeframes? Raise boxMaxPct sensitivity (smaller value mutes more), or raise atrMult (global) to demand fatter candles.
Cleaner trends only? Turn on strictSeq for Type A; raise minSpreadB and adxMin_B.
12) Mental model (TL;DR)
A = “Tight coil + fresh structure break”
B = “Established trend, strong continuation” (spread + ADX/RSI keep you out of chop)
C = “Momentum burst through many EMAs” (independent ATR gate)
Then add box mute, close confirmation, cooldown, and auto SL/TP scaffolding.
My_EMA_CloudsThis script is a comprehensive technical indicator for trading, which includes several functional blocks:
Consolidation zones
Detects and displays price consolidation areas
Draws horizontal support/resistance lines
Generates breakout alerts (up/down)
Allows customization of analysis period and minimum consolidation length
EMA Clouds (Exponential Moving Averages)
Contains 5 sets of EMA clouds with customizable periods
Each cloud consists of short and long EMAs
Cloud colors change depending on trend direction
Offers offset and display settings customization
Support and Resistance Levels
Automatically detects key levels
Uses ATR (Average True Range) for calculation
Displays extended levels
Allows visual style customization
Side Volume Indicator
Shows volume distribution across price levels
Visualizes buy and sell volumes
Displays Point of Control (PoC)
Customizable number of histograms
Liquidation Zones
Identifies potential areas of mass position liquidations
Displays levels with different multipliers (10x, 25x, 50x, 100x)
Shows position volume
Includes heatmap functionality
The script provides traders with a comprehensive set of tools for market analysis, including trend indicators, support/resistance levels, volume metrics, and potential price movement zones. All components can be customized to fit individual trading strategies.
Best usage with Likelihood of Winning - Probability Density Function
Данный скрипт представляет собой комплексный технический индикатор для трейдинга, который включает в себя несколько функциональных блоков:
Зоны консолидации
Определяет и отображает области консолидации цены
Рисует горизонтальные линии поддержки/сопротивления
Генерирует оповещения о прорывах вверх/вниз
Позволяет настраивать период анализа и минимальную длину консолидации
Облака EMA (Exponential Moving Averages)
Содержит 5 наборов EMA-облаков с настраиваемыми периодами
Каждое облако состоит из короткой и длинной EMA
Цвета облаков меняются в зависимости от направления тренда
Есть возможность настройки смещения и отображения
Уровни поддержки и сопротивления
Автоматически определяет ключевые уровни
Использует ATR (средний истинный диапазон) для расчета
Отображает расширенные уровни
Позволяет настраивать визуальный стиль
Индикатор бокового объема
Показывает распределение объема по ценовым уровням
Визуализирует объемы покупок и продаж
Отображает точку контроля (PoC)
Настраиваемое количество гистограмм
Зоны ликвидаций
Определяет потенциальные зоны массовых ликвидаций позиций
Отображает уровни с разными множителями (10x, 25x, 50x, 100x)
Показывает объем позиций
Включает функцию тепловой карты
Скрипт предоставляет трейдерам комплексный набор инструментов для анализа рынка, включая трендовые индикаторы, уровни поддержки/сопротивления, объемные показатели и зоны потенциальных движений цены. Все компоненты можно настраивать под индивидуальные торговые стратегии.
Dual Adaptive Movings### Dual Adaptive Movings
By Gurjit Singh
A dual-layer adaptive moving average system that adjusts its responsiveness dynamically using market-derived factors (CMO, RSI, Fractal Roughness, or Stochastic Acceleration). It plots:
* Primary Adaptive MA (MA): Fast, reacts to changes in volatility/momentum.
* Following Adaptive MA (FAMA): A smoother, half-alpha version for trend confirmation.
Instead of fixed smoothing, it adapts dynamically using one of four methods:
* ACMO: Adaptive CMO (momentum)
* ARSI: Adaptive RSI (relative strength)
* FRMA: Fractal Roughness (volatility + fractal dimension)
* ASTA: Adaptive Stochastic Acceleration (%K acceleration)
### ⚙️ Inputs & Options
* Source: Price input (default: close).
* Moving (Type): ACMO, ARSI, FRMA, ASTA.
* MA Length (Primary): Core adaptive window.
* Following (FAMA) Length: Optional; can match MA length.
* Use Wilder’s: Toggles Wilder vs EMA-style smoothing.
* Colors & Fill: Bullish/Bearish tones with transparency control.
### 🔑 How to Use
1. Identify Trend:
* When MA > FAMA → Bullish (fills bullish color).
* When MA < FAMA → Bearish (fills bearish color).
2. Crossovers:
* MA crosses above FAMA → Bullish signal 🐂
* MA crosses below FAMA → Bearish signal 🐻
3. Adaptive Edge:
* Select method (ACMO/ARSI/FRMA/ASTA) depending on whether you want sensitivity to momentum, strength, volatility, or acceleration.
4. Alerts:
* Built-in alerts trigger on crossovers.
### 💡 Tips
* Wilder’s smoothing is gentler than EMA, reducing whipsaws in sideways conditions.
* ACMO and ARSI are best for momentum-driven directional markets, but may false-signal in ranges.
* FRMA and ASTA excels in choppy markets where volatility clusters.
👉 In short: Dual Adaptive Movings adapts moving averages to the market’s own behavior, smoothing noise yet staying responsive. Crossovers mark possible trend shifts, while color fills highlight bias.
Advanced RSI-ADX-Bollinger Market Overview DashboardStudy Material: Advanced RSI–ADX–Bollinger Market Overview Dashboard
This dashboard is a comprehensive trading tool designed to combine three powerful technical analysis methods—RSI (Relative Strength Index), ADX (Average Directional Index), and Bollinger Bands—into one unified system with live table output and progress indicators. It aims to provide a complete market snapshot at a glance, helping traders monitor momentum, volatility, trend, and market signals.
________________________________________
🔹 Core Concepts Used
1. RSI (Relative Strength Index)
• RSI measures market momentum by comparing price gains and losses.
• A high RSI indicates overbought conditions (possible reversal or sell zone).
• A low RSI indicates oversold conditions (possible reversal or buy zone).
• In this dashboard, RSI is also represented with progress bars to show how far the current value is moving toward extreme zones.
2. ADX (Average Directional Index)
• ADX is used to gauge the strength of a trend.
• When ADX rises above a threshold, it signals a strong trend (whether bullish or bearish).
• The system checks when ADX momentum crosses above its threshold to confirm whether a signal has strong backing.
3. Bollinger Bands
• Bollinger Bands measure volatility around a moving average.
• The upper band indicates potential overbought pressure, while the lower band shows oversold pressure.
• Expansion of the bands signals rising volatility, contraction shows calming markets.
• This tool also assigns a BB Trend Label: Expand ↑ (bullish), Contract ↓ (bearish), or Neutral →.
________________________________________
🔹 What This Dashboard Tracks
1. Signal Generation
o BUY Signal: RSI oversold + price near lower Bollinger Band + ADX strength confirmation.
o SELL Signal: RSI overbought + price near upper Bollinger Band + ADX strength confirmation.
o Labels are plotted on the chart to indicate BUY or SELL points.
2. Trend Direction & Strength
o The script analyzes short- and medium-term moving averages to decide whether the market is Bullish, Bearish, or Flat.
o An arrow symbol (↑, ↓, →) is shown to highlight the trend.
3. Signal Performance Tracking
o Once a BUY or SELL signal is active, the dashboard tracks:
Maximum profit reached
Maximum loss faced
Whether the signal is still running or closed
o This gives the trader performance feedback on past and ongoing signals.
4. Volume Analysis
o Volume is split into Buy Volume (candles closing higher) and Sell Volume (candles closing lower).
o This provides insight into who is in control of the market—buyers or sellers.
5. Comprehensive Data Table
o A professional table is displayed directly on the chart showing:
RSI Value
ADX Strength
Buy/Sell Volumes
Trend Direction
Bollinger Band Trend
Previous Signal Performance (Max Profit / Max Loss)
Current Signal Performance (Max Profit / Max Loss)
Symbol Name
o Each metric is color-coded for instant decision-making.
6. Progress Indicators
o RSI Progress Bar (0–100 scale).
o ADX Progress Bar (0–50 scale).
o Bollinger Band Expansion/Contraction progress.
o Signal profit/loss progress visualization.
7. Market Status Summary
o The dashboard issues a status label such as:
🔴 SELL ACTIVE
🔵 BUY ACTIVE
🟢 BULL MARKET
🔴 BEAR MARKET
🟡 NEUTRAL
________________________________________
🔹 Practical Use Case
This dashboard is ideal for traders who want a consolidated decision-making tool. Instead of monitoring RSI, ADX, and Bollinger Bands separately, the system automatically combines them and shows signals, trends, volumes, and performance in one view.
It can be applied to:
• Intraday Trading (short-term moves with high volatility).
• Swing Trading (holding positions for days to weeks).
• Trend Confirmation (identifying when to stay in or exit trades).
________________________________________
⚠️ Strict Disclaimer (aiTrendview Policy)
• This script is a research and educational tool only.
• It does NOT guarantee profits and must not be used as a sole decision-making system.
• Past performance tracking inside the dashboard is informational and does not predict future outcomes.
• Trading involves significant financial risk, including potential loss of all capital.
• Users are fully responsible for their own trading decisions.
________________________________________
🚫 Misuse Policy (aiTrendview Standard)
• Do not misuse this tool for false claims of guaranteed profits.
• Redistribution, resale, or repackaging under another name is strictly prohibited without aiTrendview permission.
• This tool is intended to support disciplined trading practices, not reckless speculation.
• aiTrendview does not support gambling-style use or over-leveraging based on this script.
________________________________________
👉 In short: This system is a professional decision-support tool that integrates RSI, ADX, and Bollinger Bands into one dashboard with signals, performance tracking, and progress visualization. It helps traders see the bigger picture of market health—but the responsibility for action remains with the trader.
________________________________________
