Inizia

Cerca negli script per "20蒙古币兑换人民币"

AM_ZLWMA Crossover_xDear All, Please find updated version of Zero lag WMA crossover. In addition to this added 20/50 EMA to get better results. Settings: ZLWMA = 8 identified by Blue line Fast WMA = 21 identified by Red line EMA Period 20/50 How to Trade: Buy: Wait for positive crossover (Blue cross above Red) to happen trade can be taken there but to get better results post crossover once price move above EMA 20 then buy can be initiated. Sell: Wait for negative crossover (Blue cross below Red) to happen trade can be taken there but to get better results post crossover once price move below EMA 20 then sell can be initiated. Reason to wait for confirmation of price action above / Below moving average is most of the time it happens that even after crossover happens sometimes it was just a pull back and from there it could be a possibility for reversal. Once price action confirms moving above / below EMA20 then trade will be initiated. Please comment and ask for any doubt
Strategia Pine Script®
di happyTacos
3
DMI-ADX HistogramThe Average Direction Index (ADX) coupled with the Direction Movement Index (DMI), developed by J. Welles Wilder, is a popular indicator that measures trend direction and strength. The AX line (blue) is used to show the strength of the current trend. It does not tell you the trend direction. The under laid histogram shows relative movements of the price with green showing positive momentum and red showing negative momentum. Use these ADX and DMI together to find trend strength and direction. - ADX line below 20 indicates that the underlying is in accumulation/distribution. - ADX line above 20 mean that the underlying is trending with over 60 being very strong. *When the ADX line is below 20 it is likely to see many reversal signals on the DMI Histogram. It is best to use the DMI signals when the ADX line is above 20 or higher. This is also a good level to play around with. Motivation Normally the direction movements are plotted as lines with the DI+ being green and the DI- being red. When the DI+ (green) crosses over DI- (red) this may indicate a buy signal, and vice versa. I found this visual representation made it difficult to see signals as well as lacked the ability to easy see the relative strength of other moves. I have also noticed that the histogram values will periodically cross the ADX line, but not for very long periods. This could be a useful signal to explore further in the future. In this image the top indicator is using the normal DI+/- lines, where the bottom indicator is using an absolute histogram.
Indicatore Pine Script®
di Rave444
2
ADX + DI x Upgraded to Pine v4 x KingThiesAverage Directional Movement Index Momentum based tool to measure trend strength on scale of 1-100 Similar to the aroon but incorporates a 3rd measure, while aroon uses two The majority of these calculations were pre-existing in older pine scripts but have since been updated signals are given when -DI and +DI cross, ADX illustrates corresponding strength at time of cross Full Intro ADX can help investors to identify trend strengths, as di - di determines the trend direction, while d - d is an impulse indicator. If the ADX is below 20, it can be considered impulsive, while it is above 25 on a trend line. A trading signal can be generated when the di - DI line is switched to d - d and vice versa. If the di-line crosses and the ADX is above 20 (ideally 25), a potential buy signal could ebb away. If the ADX is above 20, there is the possibility of potential short selling if the DI crosses over DI. You can also use crosses to get out of the current deal if you need it for a long time. If the di-line is crossed and the Adx is below 20 (or 25), there may be opportunities to enter the potential for short trading, but only if di are above or below DI or if the price is trendy and may not prove to be the ideal time to start trading.
Indicatore Pine Script®
di kingthies
2
Weeknights Donchian CloudDonchian Channel Trading system visualised as a cloud. Regular/Quick inputs; Length: 20 Entry Length: 20 Stop Length: 10 Alternate/Slower Inputs; Length: 55 Entry Length: 55 Stop Length: 20 For a more in-depth review, look up "Turtle Trading" rules The simplest way to use the cloud; -When the cloud flips from above to below (support), close any shorts and open a long -When the cloud flips from below to above (resistance), close any longs and open a short -Cloud is flipped based on a breakout on the high / low -Most effectively used on the daily, but can be used on any time frame -For traditional markets, an input of 20 is most commonly used -For 24/7 markets, an input of 28 is most commonly used -Find an input that makes the most sense to you! I appreciate any feedback, feel free to message me on twitter / comment! Twitter ; @ImWeeknight Credit to user KivancOzbilgic for helping with the script
Indicatore Pine Script®
di w33kn1ght
Trend QualityThe quality of the current trend is calculated by adding or subtracting one point to the total value depending on the following criteras: 1. EMA-8, MA-20, MA-50, MA-100, MA-200 , each get a point if they are increasing. 2. EMA-8 > MA-20 > MA-20 > MA-50 > MA-100 > MA-200 , each condition that is true gets one point. On top of the Trend Quality value we apply a "weekly" (5 periods) and a "monthly" (22 periods) moving average. When above a value of 5, a strong trend is indicated and hence a trend following strategy should be used. Use this to Buy when bouncing back from e.g MA-20 or a confirming consolidation/candlestick/trendline pattern. When the trend decreases below Zero a trend shift may have occured. Idea, curtesy: Tobbe Rosèn
Indicatore Pine Script®
di kruskakli
16
Simple Moving Average Double HelixThis one is a mix of colour-coded moving averages and Ichimoku. It features two pairs of SMAs--default values of 9/20 and 50/200. Each SMA will be green when it rises and red when it falls. The spaces between each pair will fill with green or red depending on which line is on top. 9 over 20 or 50 over 200 makes a green cloud; if 9 or 50 falls below, the cloud will switch to green. There's also the Ichimoku lagging span and a 35-period SMA (grey) that can be used as a trailing stop loss guideline. Ideal long setup: 9, 20, 50, and 200 SMA are all green both clouds are green lagging span is above historic price action Ideal short setup: 9, 20, 50, and 200 SMA are all red both clouds are red lagging span is below historic price action
Indicatore Pine Script®
di stvch
TA Basics: further "Steps" with our Moving AverageSo far in this series of posts, we have worked thru creating a basic zero-lag moving average, then moved forward all the way to coding a "Fibonacci" Weighted Moving Average. in this post we take a look at a technique that can help traders minimize noise in the underlying data and get better insight on the changes that are happening in the data series represented by the moving average. we'll look at adding "stepping" to our Fibonacci Moving Average as an example. we introduce the Stepping Fibonacci Moving Average , or Step_FiMA note that you can use the same technique with any plot you may have. feel free to copy or leverage the relevant parts of the script - the script is commented to make this easier. How is this useful? ================== with "stepping", you get your indicator to "round" the outcome into pre-specified bands or ranges. this works very similar to how, for example, range or Renko charts work. you can easily see the difference in the chart above once we look at a non-stepped and a stepping moving average of the same length side-by-side the more granular your timeframe is, you will see the effect of the stepping clearer - here's how the same chart looks when we go into the 1-hr aggregation Notes about this script ==================== there are couple of pieces i wanted to highlight in the script if you plan to use some of it : 1 - the step(x) function is meant to try to automatically pick the best "suitable" step size based on the range of the underlying series (for example, the closing price). these ranges i included here in the code are just my own "best choices" - you are totally welcome to adjust these ranges and the resulting step size to your own preference 2 - we applied the stepping as a user-choice. user can choose a manual entry, or "0" to get the code to automatically pick the step size, or enter -1 (or actually any value below zero) to cancel the stepping option altogether - this gives us some flexibility on how to use the stepping in an indicator 3 - very important (and somehow confusing): on the "rounding" approach: the magic math formula that actually creates the stepping is this one result = round(input / step) * step now, this tells the script to "round" the result up or down (the basic rounding) -- so for example, a price of 17 with a step of 5 would be rounded (down) to 15, where as a price of 18 would be rounded "up" to 20 -- this is not the way some of us would expect or want, cause the price never reached 20 and they would want an 18 to still be rounded to 15 - and the stepping line not to show 20 *until* the price actually hits or exceeds 20 -- in that case, you would need to replace the function "round" with the function "floor" -- so the new formula becomes: floor(input / step) * step -- in an ideal world, we can make this rounding choice a user-option in the settings -- maybe in an improved version 4 - we kept the smoothing option, and it takes place before the stepping is applied - we continue to use that smoothing to further minimize the level changes in the FiMA line. I hope you find this script useful in your journey with technical analysis and DIY scripting, and good luck in your trading.
Indicatore Pine Script®
di RedKTrader
BTC and ETH Long strategy - version 1I will start with a small introduction about myself. I'm now trading cryto currencies manually for almost 2 years. I decided to start after watching a documentary on the TV showing people who made big money during the Bitcoin pump which happened at the end of 2017. The next day, I asked myself "Why should I not give it a try and learn how to trade". This was in February 2018 and the price of Bitcoin was around 11500USD. I didn't know how to trade. In fact, I didn't know the trading industry at all. So, my first step into trading was to open an account with a broken. Then I directly bought 200$ worst of BTC . At that time, I saw the graph and thought "This can only go back in the upward direction!" :) I didn't know anything about Stop loss, Take profit and Risk management. Today, almost 2 years after, I think that I know how to trade and can also confirm that I still hold this bag of 200$ of bitcoin from 2018 :) I did spend the 2 last years to learn technical analysis , risk management and leverage trading. Today (14/05/2020), I know what I'm doing and I'm happy to see that the 2 last years have been positive in terms of gains. Of course, I did not make crazy money with my saving but at least I made more than if I would have kept it in my bank account. Even if I like trading, I have a full time job which requires my full energy and lots of focus, so, the biggest problem I had is that I didn't have enough time to look at the charts. Also, I realized that sometimes, neither technical analysis , nor fundamentals worked with crypto currency (at least for short time trading). So, as I have a developer background I decided to try to have a look at algo trading. The goal for me was neither to make complex algos nor to beat the market but just to automate my trading with simple bot catching the big waves. I then started to take a look at TV pine script and played with it. I did my first LONG script in February 2020 to Long the BTC Market. It has some limitations but works well enough for me for the time being. Even if the real trades will bring me half of what the back testing shows, this will still be a lot more than what I was used to win during the last 2 years with my manual trading. So, here we are! Below you will find some details about my first LONG script. I'm happy to share it with you. Feel free to play with it, give your comments and bring improvements to it. But please note that it only works fine with the candle size and crypto pair that I have mentioned below. If you use other settings this algo might loose money! - Crypto pairs : XBTUSD and ETHXBT - Candle size: 2 Hours - Indicator used: Volatility , MACD (12, 26, 7), SMA (100), SMA (200), EMA (20) - Default StopLoss: -1.5% - Entry in position if: Volatility < 2% AND MACD moving up AND AME (20) moving up AND SMA (100) moving up AND SMA (200) moving up AND EMA (20) > SAM (100) AND SMA (100) > SMA (200) - Exit the postion if: Stoploss is reached OR EMA (20) crossUnder SMA (100) Here is a summary of the results for this script: XBTUSD : 01/01/2019 --> 14/05/2020 = +107% ETHXBT : 01/01/2019 --> 14/05/2020 = +39% ETHUSD : 01/01/2019 --> 14/05/2020 = +112% It is far away from being perfect. There are still plenty of things which can be done to improve it but I just wanted to share it :) . Enjoy playing with it....
Strategia Pine Script®
di philipina
10
BO - Bar M15 2/3 SignalBO - Bar M15 2/3 Signal show the signal to trade Binary Option with rule below: A. Indicator * Bollinger Band (20,2): avoid waterfall B. Rule of Signal 1. Rule1: Split Bar M15 to 3 part and load them on M5 chart (recommend use M5 IDC chart) 2. Rule 2: Delay 10' after bar M15 open => wait for price's pattern 3. Rule 3: Put Signal row 30-32 * Delay 10' after bar M15 open. * Direction of 1/3 and 2/3 Bar M15 is upward * close of 2/3 Bar M15 below upper band Bb(20,2) on M5 chart => avoid strong buy 4. Rule 4: Call Signal row 36-38 * Delay 10' after bar M15 open. * Direction of 1/3 and 2/3 Bar M15 is downward * close of 2/3 Bar M15 above lower band Bb(20,2) on M5 chart => avoid strong sell C. Recommend Expiry time: Bar M15 close * We try to catch the shadow of Bar M15 but dont trade when price run on the upper or lower band of BB(20,2,M5)
Indicatore Pine Script®
di inno14
Pivot trend indicatorThis is a LAGGING indicator which can provide a good indication of trend. It require a certain (configurable) number of candles to have closed before it can determine whether a pivot has formed. It provides a 20 period SMA for the timeframe of your choice which is color coded to show the trend according to confirmed pivots. Anticipated usage: Long / Short bias is determined by pivot trend Trader seeks entries according to their strategy Black consolidation areas may trigger a re-evaluation of the trade and can serve as good profit taking areas The SMA colors: Green -> Higher highs & Higher lows Red -> Lower highs & Lowers lows Black -> No clear trend from the pivots Why the 20 SMA? Feel free to adjust it for your purposes. I personally find that using a higher time frame 20 SMA is a better indication of trend than longer period MAs on shorter time frames. This can be seen from comparing the 20 daily SMA and 200 hourly SMA. Pivot adjustment The pivots use the selected time frame (not) the MA trend time frame. You can specify the left and right candles required to confirm a pivot
Indicatore Pine Script®
di mgibson91
VIX reversion-Buschi English: A significant intraday reversion (commonly used: 3 points) on a high (over 20 points) S&P 500 Volatility Index (VIX) can be a sign of a market bottom, because there is the assumption that some of the "big guys" liquidated their options / insurances because the worst is over. This indicator shows these reversions (3 points as default) when the VIX was over 20 points. The character "R" is then shown directly over the daily column, the VIX need not to be loaded explicitly. Deutsch: Eine deutliche Intraday-Umkehr (3 Punkte im Normalfall) bei einem hohen (über 20 Punkte) S&P 500 Volatility Index (VIX) kann ein Zeichen für eine Bodenbildung im Markt sein, weil möglicherweise einige "große Jungs" ihre Optionen / Versicherungen auflösen, weil das schlimmste vorbei ist. Dieser Indikator zeigt diese Umkehr (Standardwert: 3 Punkte), wenn der VIX vorher über 20 Punkte lag. Der Buchstabe "R" wird dabei direkt über dem Tagesbalken angezeigt, wobei der VIX nicht explizit geladen werden muss.
Indicatore Pine Script®
di MagicEins
2
Triple Moving Average HeatmapHi everyone I didn't publish on Friday because I was working on an Expert Advisor in MT4. The day I don't publish, some scripts spamming guys published many (not useful) scripts the same to kick me out of the TOP #1 ranking. So what I'm going to do about it? crying or sharing more quality scripts than before? :) I guess you know the answer :) I'm gonna share a few quality scripts that I have in my library. I noticed that you guys tend to like more the scripts useful for your trading actually making you money rather than a copy-paste (of another copy-paste) Alright, enough for the trolling now let's introduce the Three MA heatmap which is an upgrade of that script : MA-heatmap-Double-cross-edition/ The challenge was to keep the heatmap not rolling and to make it match with the MA cross. I did it using this ``` since_ma_buy = barssince(macrossover) since_ma_sell = barssince(macrossunder) heatmap_color() => since_ma_buy < since_ma_sell ? color.new(color.green, 20) : since_ma_buy > since_ma_sell ? color.new(color.red, 20) : na ``` This is a technique that I found after drinking three glasses of red wine (#french) to keep the heatmap stable and not rolling. To get what I'm saying I invite you to replace the piece of code above by what everyone would normally do ``` heatmap_color() => macrossunder() ? color.new(color.green, 20) : macrossover() ? color.new(color.red, 20) : na ``` Ah and I'm not done sharing for the day, a few scripts are coming also after that one and tonight !!!!! I want to live in a world where you guys can enjoy quality scripts (mostly) :) PS ____________________________________________________________ Feel free to hit the thumbs up as it shows me that I'm not doing this for nothing and will motivate to deliver more quality content in the future. - I'm an officially approved PineEditor/LUA/MT4 approved mentor on codementor. You can request a coaching with me if you want and I'll teach you how to build kick-ass indicators and strategies Jump on a 1 to 1 coaching with me - You can also hire for a custom dev of your indicator/strategy/bot/chrome extension/python
Indicatore Pine Script®
di Daveatt
6
Palex 2.0Atualização do SETUP do saudoso Professor Alexandre Fernandes "Palex" - Bandas de Bolliger (Standard) = *Banda Superior = Média Móvel Simples (20 dias) + (2 x Desvio Padrão de 20 dias) *Banda Inferior = Média Móvel Simples (20 dias) – (2 x Desvio Padrão de 20 dias) - EMA 9 (Média Móvel Exponencial) - SMA 21 (Média Móvel Simples) - SMA 200 (Média Móvel Simples) Clássica MA 200 períodos - SMA 400 (Média Móvel Simples) - EMA 400 (Média Móvel Exponencial) - WILD (Média Móvel Welles Wilder) O mesmo usado pelo nosso grande Mestre PALEX!
Indicatore Pine Script®
di ferGOD
1
The 6 Line Death PunchIf you are looking to discover what trend you are in, you need to first what direction the price is going in... I've been using and testing a mixture of EMA's and SMA's for a long time and I've found that these ones are by far the best. EMA 3 EMA 8 MA 20 EMA 55 MA 100 MA 200 EMA 3 & 8 Crossover is a good method for confirming a coin going to the upside or to the downside. EMA 8 is known as the Trigger Line (trademarked brand) as one of the fib numbers it shows good support or resistance of a trend. MA 20 universal way of seeing trend direction in the stock market, works well with crypto too. EMA 55, another trusty fib number. Works very well and could trade off that alone as support and resistance. MA 100 and MA 200. Long ranged moving averages which govern the overall longer-term trend. LONG ENTRY Option 1 - 3/8 crossover Option 2 - Candles above EMA 8 Option 3 - Candles above MA 20 Option 4 - Candles Above EMA 55. SHORT ENTRY Option 1 - 3/8 crossover Option 2 - Candles below EMA 8 Option 3 - Candles below MA 20 Option 4 - Candles below EMA 55.
Indicatore Pine Script®
di CryptoMobster
3
Signals for call and putSorry for the Google Translate English Indicator for signals of call and put, using Bollinger bands (period 20, standard deviation 2.5), market trend of (sma, períod 100) and stochastic (period 20, %D 3). I was overthrown but in pine scrip, the function "stoch()" no way to smooth (3). If anyone knows how to smooth inside the script, help me! Please. With smoothed stochastic the hit rate grows a lot. Português (Pt-Br) Indicador de sinais de compra e venda, usando bandas de Bollinger (período de 20, desvio de 2,5), tendencia de mercado com (sma período 100) e estocástico (período 20, %D de 3). Eu travei porque no pine script, a função "stoch()" não tem como aplicar a suavização (3). Se alguem souber como suavizar dentro do script, me ajude! Por favor.
Indicatore Pine Script®
di borest5543
1
MG - Multiple Moving Averages & Candle Wick Alerts - 1.0Features: - Each moving average has customizable length, type and source - The ability to change the source of all moving averages with one input (changing an individual MA source will override the general for that MA) - At a glance comparison of 20 SMA and 20 VWMA to gauge volume trend - Wick alerts which can be toggled for each moving average. - Bullish wick alerts are when the wick is the only part of the candle to drop below the moving average - Bearish wick alerts are when the wick is the only part of the candle to reach above the moving average - Simple candle closed alert if you want a notification, for example each hour. Defaults: Four SMAs (20, 50, 100, 200) and a 20 VWMA . Recommended Usage: - Set the general source (sets the source of all moving averages) to 'low' when in an uptrend and 'high' in a downtrend to maximize Risk : Reward. - Use Fibonacci levels, oscillators .etc for confluence NOTE: The moving average component of this indicator is the same as the previous indicator ()
Indicatore Pine Script®
di mgibson91
2
Indicator - Multiple Moving Averages 1.0Features: - Each moving average has customizable length, type and source - The ability to change the source of all moving averages with one input (changing an individual MA source will override the general for that MA) - At a glance comparison of 20 SMA and 20 VWMA to gauge volume trend Defaults: Four SMAs (20, 50, 100, 200) and a 20 VWMA. Usage: - Use Fibonacci levels, pivots .etc for confluence - Personally, I like to set overall source to low in uptrends, to high in downtrends and then set alerts for when the price crosses any of the averages. Then pay particular attention to the candlesticks and other indicators. TODO: - Add alerts option so that it send alert on crossing up or down any alert lines.
Indicatore Pine Script®
di mgibson91
XPloRR MA-Trailing-Stop StrategyXPloRR MA-Trailing-Stop Strategy Long term MA-Trailing-Stop strategy with Adjustable Signal Strength to beat Buy&Hold strategy None of the strategies that I tested can beat the long term Buy&Hold strategy. That's the reason why I wrote this strategy. Purpose: beat Buy&Hold strategy with around 10 trades. 100% capitalize sold trade into new trade. My buy strategy is triggered by the fast buy EMA (blue) crossing over the slow buy SMA curve (orange) and the fast buy EMA has a certain up strength. My sell strategy is triggered by either one of these conditions: the EMA(6) of the close value is crossing under the trailing stop value (green) or the fast sell EMA (navy) is crossing under the slow sell SMA curve (red) and the fast sell EMA has a certain down strength. The trailing stop value (green) is set to a multiple of the ATR(15) value. ATR(15) is the SMA(15) value of the difference between the high and low values. The scripts shows a lot of graphical information: The close value is shown in light-green. When the close value is lower then the buy value, the close value is shown in light-red. This way it is possible to evaluate the virtual losses during the trade. the trailing stop value is shown in dark-green. When the sell value is lower then the buy value, the last color of the trade will be red (best viewed when zoomed)(in the example, there are 2 trades that end in gain and 2 in loss (red line at end)) the EMA and SMA values for both buy and sell signals are shown as a line the buy and sell(close) signals are labeled in blue How to use this strategy? Every stock has it's own "DNA", so first thing to do is tune the right parameters to get the best strategy values voor EMA , SMA, Strength for both buy and sell and the Trailing Stop (#ATR). Look in the strategy tester overview to optimize the values Percent Profitable and Net Profit (using the strategy settings icon, you can increase/decrease the parameters) Then keep using these parameters for future buy/sell signals only for that particular stock. Do the same for other stocks. Important : optimizing these parameters is no guarantee for future winning trades! Here are the parameters: Fast EMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 10-20) Slow SMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 30-100) Minimum Buy Strength: minimum upward trend value of the Fast SMA Buy value (directional coefficient)(use values between 0-120) Fast EMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 10-20) Slow SMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 30-100) Minimum Sell Strength: minimum downward trend value of the Fast SMA Sell value (directional coefficient)(use values between 0-120) Trailing Stop (#ATR): the trailing stop value as a multiple of the ATR(15) value (use values between 2-20) Example parameters for different stocks (Start capital: 1000, Order=100% of equity, Period 1/1/2005 to now) compared to the Buy&Hold Strategy(=do nothing): BEKB(Bekaert): EMA-Buy=12, SMA-Buy=44, Strength-Buy=65, EMA-Sell=12, SMA-Sell=55, Strength-Sell=120, Stop#ATR=20 NetProfit: 996%, #Trades: 6, %Profitable: 83%, Buy&HoldProfit: 78% BAR(Barco): EMA-Buy=16, SMA-Buy=80, Strength-Buy=44, EMA-Sell=12, SMA-Sell=45, Strength-Sell=82, Stop#ATR=9 NetProfit: 385%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 55% AAPL(Apple): EMA-Buy=12, SMA-Buy=45, Strength-Buy=40, EMA-Sell=19, SMA-Sell=45, Strength-Sell=106, Stop#ATR=8 NetProfit: 6900%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 2938% TNET(Telenet): EMA-Buy=12, SMA-Buy=45, Strength-Buy=27, EMA-Sell=19, SMA-Sell=45, Strength-Sell=70, Stop#ATR=14 NetProfit: 129%, #Trade
Strategia Pine Script®
di XPl0RR
8
Supertrend with ADX & MTF MA Filter# **Supertrend with ADX & MTF MA Filter - Comprehensive Explanation** --- ## **1. Purpose of This Indicator** This indicator combines three powerful technical analysis tools to create a robust trading system: ✅ **Supertrend** (Trend-following) ✅ **ADX Filter** (Trend strength confirmation) ✅ **MTF MA Filter** (Multi-timeframe trend direction confirmation) **Primary Goals:** ✔ **Identify high-probability trend reversals** with confirmation from multiple indicators ✔ **Filter out weak trends** using ADX (Average Directional Index) ✔ **Add higher timeframe context** with MTF (Multi-TimeFrame) Moving Average ✔ **Reduce false signals** by requiring confluence between all three components --- ## **2. Core Logic & Components** ### **A. Supertrend (Base Indicator)** - **Calculation:** ```pine up = hl2 - (Multiplier * ATR(Periods)) dn = hl2 + (Multiplier * ATR(Periods)) ``` - **Bullish trend** when price > `up` (green line) - **Bearish trend** when price < `dn` (red line) - **Why Supertrend?** - Simple yet effective trend-following system - Adapts to volatility via ATR (Average True Range) --- ### **B. ADX Filter (Trend Strength Confirmation)** - **ADX Calculation:** ```pine = calcADX(adxLength, adxSmoothing) strongTrend = adxVal >= adxThreshold ``` - **ADX > Threshold (Default: 20)** = Strong trend - **DI+ > DI-** = Bullish momentum - **DI- > DI+** = Bearish momentum - **Why ADX?** - Avoids trading in choppy markets (low ADX = weak trend) - Confirms if Supertrend signals occur in a strong trend --- ### **C. MTF MA Filter (Higher Timeframe Trend Alignment)** - **Moving Average Calculation:** ```pine = getMA(maSource, maLength, maType, maTF) ``` - **MA Type:** SMA, EMA, WMA, or DEMA - **Timeframe:** Any (1m, 5m, 1H, 4H, D, W, M) - **Trend Direction:** - **Buy Signal:** MA must be **rising** - **Sell Signal:** MA must be **falling** - **Why MTF MA?** - Aligns trades with the **higher timeframe trend** - Reduces counter-trend entries --- ## **3. How to Use This Indicator** ### **A. Buy Conditions (All Must Be True)** 1. **Supertrend turns bullish** (price crosses above `up` line) 2. **ADX ≥ Threshold** (trend is strong) 3. **Higher timeframe MA is rising** (confirms bullish bias) ### **B. Sell Conditions (All Must Be True)** 1. **Supertrend turns bearish** (price crosses below `dn` line) 2. **ADX ≥ Threshold** (trend is strong) 3. **Higher timeframe MA is falling** (confirms bearish bias) ### **C. Recommended Settings** | Parameter | Recommended Value | Description | |-----------|------------------|-------------| | **ATR Period** | 14 | Sensitivity of Supertrend | | **Multiplier** | 1.5-3.0 | Adjust for volatility | | **ADX Threshold** | 20-25 | Higher = stricter trend filter | | **MA Length** | 20-50 | Smoothness of trend filter | | **MA Timeframe** | 1H/D | Align with trading style | --- ## **4. Trading Strategies** ### **A. Trend-Following Strategy** - **Enter:** When all 3 conditions align (Supertrend + ADX + MA) - **Exit:** When Supertrend flips or ADX drops below threshold ### **B. Pullback Strategy** - **Wait for:** - Supertrend in trend direction - ADX remains strong - MA still aligned - **Enter:** On pullback to Supertrend line ### **C. Multi-Timeframe Confirmation** - **Intraday traders:** Use 4H/D MA for trend bias - **Swing traders:** Use D/W MA for trend bias --- ## **5. Advantages Over Standard Supertrend** ✔ **Fewer false signals** (ADX filters weak trends) ✔ **Higher timeframe alignment** (avoids trading against larger trends) ✔ **Customizable MA types** (SMA, EMA, WMA, DEMA) ✔ **Works on all markets** (stocks, forex, crypto) --- ### **Final Thoughts** This indicator is designed for traders who want **high-confidence trend signals** by combining: 🔹 **Supertrend** (entry trigger) 🔹 **ADX** (trend strength filter) 🔹 **MTF MA** (higher timeframe trend alignment) By requiring all three components to align, it significantly improves signal quality compared to standalone Supertrend systems. **→ Best for:** Swing trading, trend-following, and avoiding choppy markets.
Indicatore Pine Script®
di shinhasegawa
ICT TOOLS//@version=5 indicator("ICT TOOLS", overlay=true, max_lines_count=500, max_labels_count=5, max_boxes_count=500) // General Settings Inputs TZI = input.string (defval="UTC -4", title="Timezone Selection", options= , tooltip="Select the Timezone. ( Shifts Chart Elements )", group="Global Settings") Timezone = TZI == "UTC -10" ? "GMT-10:00" : TZI == "UTC -7" ? "GMT-07:00" : TZI == "UTC -6" ? "GMT-06:00" : TZI == "UTC -5" ? "GMT-05:00" : TZI == "UTC -4" ? "GMT-04:00" : TZI == "UTC -3" ? "GMT-03:00" : TZI == "UTC +0" ? "GMT+00:00" : TZI == "UTC +1" ? "GMT+01:00" : TZI == "UTC +2" ? "GMT+02:00" : TZI == "UTC +3" ? "GMT+03:00" : TZI == "UTC +3:30" ? "GMT+03:30" : TZI == "UTC +4" ? "GMT+04:00" : TZI == "UTC +5" ? "GMT+05:00" : TZI == "UTC +5:30" ? "GMT+05:30" : TZI == "UTC +6" ? "GMT+06:00" : TZI == "UTC +7" ? "GMT+07:00" : TZI == "UTC +8" ? "GMT+08:00" : TZI == "UTC +9" ? "GMT+09:00" : TZI == "UTC +9:30" ? "GMT+09:30" : TZI == "UTC +10" ? "GMT+10:00" : TZI == "UTC +10:30" ? "GMT+10:30" : TZI == "UTC +11" ? "GMT+11:00" : TZI == "UTC +13" ? "GMT+13:00" : "GMT+13:45" inputMaxInterval = input.int (31, title="Hide Indicator Above Specified Minutes", tooltip="Above 30Min, Chart Will Become Messy & Unreadable", group="Global Settings") // Session options ShowTSO = input.bool (true, title="Show Today's Session Only", group="Session Options", tooltip="Hide Historical Sessions") ShowTWO = input.bool (true, title="Show Current Week's Sessions Only", group="Session Options", tooltip="Show All Sessions from the current week") SL4W = input.bool (true, title="Show Last 4 Week Sessions", group="Session Options", tooltip="Show All Sessions from Last Four Weeks \nShould Disable Current Week Session to Work") ShowSFill = input.bool (false, title="Show Session Highlighting", group="Session Options", tooltip="Highlights Session from Top of the Chart to Bottom") //---------------------------------------------- // Historical Lines ShowMOPL = input.bool (title="Midnight Historical Price Lines", defval=false, group="Historical Lines", tooltip="Shows Historical Midnight Price Lines") MOLHist = input.bool (title="Midnight Historical Vertical Lines", defval=true, group="Historical Lines", tooltip="Shows Historical Midnight Vertical Lines") ShowPrev = input.bool (false, title="Misc. Historical Price Lines", group="Historical Lines", tooltip="Makes Chart Cluttered, Use For Backtesting Only") //---------------------------------------------- // Session Bool ShowLondon = input.bool (false, "", inline="LONDON", group="Sessions", tooltip="01:00 to 05:00") ShowNY = input.bool (false, "", inline="NY", group="Sessions", tooltip="07:00 to 10:00") ShowLC = input.bool (false, "", inline="LC", group="Sessions", tooltip="10:00 to 12:00") ShowPM = input.bool (false, "",inline="PM", group="Sessions", tooltip="13:00 to 16:00") ShowAsian = input.bool (false, "",inline="ASIA2", group="Sessions", tooltip="20:00 to 00:00") ShowFreeSesh = input.bool (false, "",inline="FREE", group="Sessions", tooltip="Custom Session") // Session Strings txt2 = input.string ("LONDON", title="", inline="LONDON", group="Sessions") txt3 = input.string ("NEW YORK", title="", inline="NY", group="Sessions") txt4 = input.string ("LDN CLOSE", title="", inline="LC", group="Sessions") txt5 = input.string ("AFTERNOON", title="", inline="PM", group="Sessions") txt6 = input.string ("ASIA", title="", inline="ASIA2", group="Sessions") txt9 = input.string ("FREE SESH", title="", inline="FREE", group="Sessions") // CBDR = input.session ('1400-2000:1234567', "", inline="CBDR", group="Sessions") // ASIA = input.session ('2000-0000:1234567', "", inline="ASIA", group="Sessions") // Session Times LDNsesh = input.session ('0200-0500:1234567', "", inline="LONDON", group="Sessions") NYsesh = input.session ('0700-1000:1234567', "", inline="NY", group="Sessions") LCsesh = input.session ('1000-1200:1234567', "", inline="LC", group="Sessions") PMsesh = input.session ('1300-1600:1234567', "", inline="PM", group="Sessions") ASIA2sesh = input.session ('2000-2359:1234567', "", inline="ASIA2", group="Sessions") FreeSesh = input.session ('0000-0000:1234567', "", inline="FREE", group="Sessions") // Session Color LSFC = input.color (color.new(#787b86, 90), "", inline="LONDON", group="Sessions") NYSFC = input.color (color.new(#787b86, 90), "",inline="NY", group="Sessions") LCSFC = input.color (color.new(#787b86, 90), "",inline="LC", group="Sessions") PMSFC = input.color (color.new(#787b86, 90), "",inline="PM", group="Sessions") ASFC = input.color (color.new(#787b86, 90), "",inline="ASIA2", group="Sessions") FSFC = input.color (color.new(#787b86, 90), "",inline="FREE", group="Sessions") //---------------------------------------------- // Vertical Line Bool ShowMOP = input.bool (title="", defval=true, inline="MOP", group="Vertical Lines", tooltip="00:00 AM") txt12 = input.string ("MIDNIGHT", title="", inline="MOP", group="Vertical Lines") ShowLOP = input.bool (title="", defval=false, inline="LOP", group="Vertical Lines", tooltip="03:00 AM") txt14 = input.string ("LONDON", title="", inline="LOP", group="Vertical Lines") ShowNYOP = input.bool (title="", defval=true, inline="NYOP", group="Vertical Lines", tooltip="08:30 AM") txt15 = input.string ("NEW YORK", title="", inline="NYOP", group="Vertical Lines") ShowEOP = input.bool (title="", defval=false, inline="EOP", group="Vertical Lines", tooltip="09:30 AM") txt16 = input.string ("EQUITIES", title="", inline="EOP", group="Vertical Lines") // Vertical Line Color MOPColor = input.color (color.new(#787b86, 0), "", inline="MOP", group="Vertical Lines") LOPColor = input.color (color.rgb(0,128,128,60), "", inline="LOP", group="Vertical Lines") NYOPColor = input.color (color.rgb(0,128,128,60), "", inline="NYOP", group="Vertical Lines") EOPColor = input.color (color.rgb(0,128,128,60), "", inline="EOP", group="Vertical Lines") // Vertical LineStyle Midnight_Open_LS = input.string ("Dotted", "", options= , inline="MOP", group="Vertical Lines") london_Open_LS = input.string ("Solid", "", options= , inline="LOP", group="Vertical Lines") NY_Open_LS = input.string ("Solid", "", options= , inline="NYOP", group="Vertical Lines") Equities_Open_LS = input.string ("Solid", "", options= , inline="EOP", group="Vertical Lines") // Vertical LineWidth Midnight_Open_LW = input.string ("1px", "", options= , inline="MOP", group="Vertical Lines") London_Open_LW = input.string ("1px", "", options= , inline="LOP", group="Vertical Lines") NY_Open_LW = input.string ("1px", "", options= , inline="NYOP", group="Vertical Lines") Equities_Open_LW = input.string ("1px", "", options= , inline="EOP", group="Vertical Lines") //---------------------------------------------- // Opening Price Bool ShowMOPP = input.bool (title="", defval=true, inline="MOPP", group="Opening Price Lines", tooltip="00:00 AM") txt13 = input.string ("MIDNIGHT", title="", inline="MOPP", group="Opening Price Lines") ShowNYOPP = input.bool (title="", defval=false, inline="NYOPP", group="Opening Price Lines", tooltip="08:30 AM") txt17 = input.string ("NEW YORK", title="", inline="NYOPP", group="Opening Price Lines") ShowEOPP = input.bool (title="", defval=false, inline="EOPP", group="Opening Price Lines", tooltip="09:30 AM") txt18 = input.string ("EQUITIES", title="", inline="EOPP", group="Opening Price Lines") ShowAFTPP = input.bool (title="", defval=false, inline="AFTOPP", group="Opening Price Lines", tooltip="01:30 PM") txt1330 = input.string ("AFTERNOON", title="", inline="AFTOPP", group="Opening Price Lines") // Opening Price Color MOPColP = input.color (color.new(#787b86, 0), "", inline="MOPP", group="Opening Price Lines") NYOPColP = input.color (color.new(#787b86, 0), "", inline="NYOPP", group="Opening Price Lines") EOPColP = input.color (color.new(#787b86, 0), "", inline="EOPP", group="Opening Price Lines") AFTOPColP = input.color (color.new(#787b86, 0), "", inline="AFTOPP", group="Opening Price Lines") // Opening Price LineStyle MOPLS = input.string ("Dotted", "", options= , inline="MOPP", group="Opening Price Lines") NYOPLS = input.string ("Dotted", "", options= , inline="NYOPP", group="Opening Price Lines") EOPLS = input.string ("Dotted", "", options= , inline="EOPP", group="Opening Price Lines") AFTOPLS = input.string ("Dotted", "", options= , inline="AFTOPP", group="Opening Price Lines") // Opening Price LineWidth i_MOPLW = input.string ("1px", "", options= , inline="MOPP", group="Opening Price Lines") i_NYOPLW = input.string ("1px", "", options= , inline="NYOPP", group="Opening Price Lines") i_EOPLW = input.string ("1px", "", options= , inline="EOPP", group="Opening Price Lines") i_AFTOPLW = input.string ("1px", "", options= , inline="AFTOPP", group="Opening Price Lines") //---------------------------------------------- // W&M Bool ShowWeekOpen = input.bool (defval=false, title="", tooltip="Draw Weekly Open Price Line", group="HTF Opening Price Lines", inline="WO") showMonthOpen = input.bool (defval=false, title="", tooltip="Draw Monthly Open Price Line", group="HTF Opening Price Lines", inline="MO") // W&M String txt19 = input.string ("WEEKLY", title="", inline="WO", group="HTF Opening Price Lines") txt20 = input.string ("MONTHLY", title="", inline="MO", group="HTF Opening Price Lines") // W&M Color i_WeekOpenCol = input.color (title="", defval=color.new(#787b86, 0), group="HTF Opening Price Lines", inline="WO") i_MonthOpenCol = input.color (title="", tooltip="", defval=color.new(#787b86, 0), group="HTF Opening Price Lines", inline="MO") // W&M LineStyle WOLS = input.string ("Dotted", "", options= , inline="WO", group="HTF Opening Price Lines") MOLS = input.string ("Dotted", "", options= , inline="MO", group="HTF Opening Price Lines") // W&M LineWidth i_WOPLW = input.string ("1px", "", options= , inline="WO", group="HTF Opening Price Lines") i_MONPLW = input.string ("1px", "", options= , inline="MO", group="HTF Opening Price Lines") //---------------------------------------------- // CBDR, ASIA & FLOUT ShowCBDR = input.bool (true, "", inline='CBDR', group="CBDR, ASIA & FLOUT") ShowASIA = input.bool (true, "", inline='ASIA', group="CBDR, ASIA & FLOUT") ShowFLOUT = input.bool (false, "", inline='FLOUT', group="CBDR, ASIA & FLOUT") // Strings txt0 = input.string ("CBDR", title="", inline="CBDR", group="CBDR, ASIA & FLOUT", tooltip="16:00 to 20:00 \nSD Increments of 1") txt1 = input.string ("ASIA", title="", inline="ASIA", group="CBDR, ASIA & FLOUT", tooltip="20:00 to 00:00 \nSD Increments of 1") txt7 = input.string ("FLOUT", title="", inline="FLOUT", group="CBDR, ASIA & FLOUT", tooltip="16:00 to 00:00 \nSD Increments of 0.5") // Color CBDRBoxCol = input.color (color.new(#787b86, 0),"", inline='CBDR', group="CBDR, ASIA & FLOUT") ASIABoxCol = input.color (color.new(#787b86, 0), "", inline='ASIA', group="CBDR, ASIA & FLOUT") FLOUTBoxCol = input.color (color.new(#787b86, 0),"", inline='FLOUT', group="CBDR, ASIA & FLOUT") // Extras box_text_cbdr = input.bool (true, "Show Text", inline="CBDR", group="CBDR, ASIA & FLOUT") box_text_cbdr_col = input.color (color.new(color.gray, 80), "", inline="CBDR", group="CBDR, ASIA & FLOUT") bool_cbdr_dev = input.bool (true, "SD", inline="CBDR", group="CBDR, ASIA & FLOUT") box_text_asia = input.bool (true, "Show Text", inline="ASIA", group="CBDR, ASIA & FLOUT") box_text_asia_col = input.color (color.new(color.gray, 80), "", inline="ASIA", group="CBDR, ASIA & FLOUT") bool_asia_dev = input.bool (true, "SD", inline="ASIA", group="CBDR, ASIA & FLOUT") box_text_flout = input.bool (true, "Show Text", inline="FLOUT", group="CBDR, ASIA & FLOUT") box_text_flout_col = input.color (color.new(color.gray, 80), "", inline="FLOUT", group="CBDR, ASIA & FLOUT") bool_flout_dev = input.bool (true, "SD", inline="FLOUT", group="CBDR, ASIA & FLOUT") // Table // SD Lines ShowDevLN = input.bool (title="", defval=true, inline="DEVLN", group="Standard Deviation", tooltip="Deviation Lines") DEVLNTXT = input.string ("SD LINES", title="", inline="DEVLN", group="Standard Deviation") DevLNCol = input.color (color.new(#787b86, 0), "", inline="DEVLN", group="Standard Deviation") DEVLS = input.string ("Solid", "", options= , inline="DEVLN", group="Standard Deviation") i_DEVLW = input.string ("1px", "", options= , inline="DEVLN", group="Standard Deviation") DEVLSS = DEVLS=="Solid" ? line.style_solid : DEVLS == "Dotted" ? line.style_dotted : line.style_dashed DEVLW = i_DEVLW=="1px" ? 1 : i_DEVLW == "2px" ? 2 : i_DEVLW == "3px" ? 3 : i_DEVLW == "4px" ? 4 : 5 ShowDev = input.bool (false, '', inline="DEV", group="Standard Deviation") txt8 = input.string ("SD COUNT", title="", inline="DEV", group="Standard Deviation") SDCountCol = input.color (color.new(#787b86, 0), "", inline="DEV", group="Standard Deviation") DevInput = input.string ("2 SD", "", options= , inline="DEV", group="Standard Deviation") DevDirection = input.string ("Both", "", options= , inline="DEV", group="Standard Deviation", tooltip="SD Count, NULL, SD Count, SD Direction") DevCount = DevInput == "1 SD" ? 1 : DevInput == "2 SD" ? 2 : DevInput == "3 SD" ? 3 : 4 Auto_Select = input.bool (false, "", group="Standard Deviation", inline="AUTOSD", tooltip="Auto SD Selection | Charter Content, Range Table \nMight Bug Out On Mondays" ) txtSD = input.string ("AUTO SD", "", group="Standard Deviation", inline="AUTOSD") Tab1txtCol = input.color (color.new(#808080, 0), "", inline='AUTOSD', group="Standard Deviation") TabOptionShow = input.string ("Show Table", "", options= , inline="AUTOSD", group="Standard Deviation") Stats = TabOptionShow == "Show Table" ? true : false TabOption1 = input.string ("Top Right", "", options= , inline="AUTOSD", group="Standard Deviation") tabinp1 = TabOption1 == "Top Left" ? position.top_left : TabOption1 == "Top Center" ? position.top_center : TabOption1 == "Top Right" ? position.top_right : TabOption1 == "Middle Left" ? position.middle_left : TabOption1 == "Middle Right" ? position.middle_right : TabOption1 == "Bottom Left" ? position.bottom_left : TabOption1 == "Bottom Center" ? position.bottom_center : position.bottom_right L_Prof = true CellBG = color.new(#131722, 100) //---------------------------------------------- // Day Of Week & Labels // Label Settings Inputs ShowLabel = input.bool (true, title="", inline="Glabel", group="Day Of Week & Labels") txt21 = input.string ("LABEL", title="", inline="Glabel", group="Day Of Week & Labels") LabelColor = input.color (color.rgb(0,0,0,100), "", inline="Glabel", group="Day Of Week & Labels") LabelSizeInput = input.string ("Normal", "", options= , inline="Glabel", group="Day Of Week & Labels") Terminusinp = input.string ("Terminus @ Current Time +1hr", "", options = , inline="Glabel", group="Day Of Week & Labels", tooltip="Select Label Size & Color & Terminus \nHistorical Price Lines needs to be toggled off for using Terminus") ShowLabelText = input.bool (true, title="", inline="label", group="Day Of Week & Labels") txt22 = input.string ("LABEL TEXT", title="", inline="label", group="Day Of Week & Labels") LabelTextColor = input.color (color.new(#787b86, 0), title="", inline="label", group="Day Of Week & Labels") LabelTextOptioninput = input.string ("Time", "", options= , inline="label", group="Day Of Week & Labels", tooltip="Choose Between Descriptive Text as Label or Time \nShow/Hide Prices on Labels") ShowPricesBool = input.string ("Hide Prices", title="", options= , group="Day Of Week & Labels", inline="label") ShowPrices = ShowPricesBool == "Show Prices" ? true : false showDOW = input.bool (true, title="", inline="DOW", group="Day Of Week & Labels") txt24 = input.string ("DAY OF WEEK", title="", inline="DOW", group="Day Of Week & Labels") i_DOWCol = input.color (color.new(#787b86, 0), title="", inline="DOW", group="Day Of Week & Labels") DOWTime = input.int (defval = 12, title="", inline="DOW", group="Day Of Week & Labels") DOWLoc_inpt = input.string ("Bottom", "", options = , inline="DOW", group="Day Of Week & Labels", tooltip="DOW Color, Time Alignment, Vertical Location") DOWLoc = DOWLoc_inpt == "Bottom" ? location.bottom : location.top //---------------------------------------------- BIAS_M_Bool = input.bool (false, "", group="BIAS & NOTES PRECONFIG", inline="stats") txt100 = input.string ("BIAS", title="", inline="stats", group="BIAS & NOTES PRECONFIG") TableBG2 = color.new(#131722, 100) Tab2txtCol = input.color (color.new(#787b86, 0), "", inline='stats', group="BIAS & NOTES PRECONFIG") TabOption2 = input.string ("Bottom Right", "", options= , inline="stats", group="BIAS & NOTES PRECONFIG") tabinp2 = TabOption2 == "Top Left" ? position.top_left : TabOption2 == "Top Center" ? position.top_center : TabOption2 == "Top Right" ? position.top_right : TabOption2 == "Middle Left" ? position.middle_left : TabOption2 == "Middle Right" ? position.middle_right : TabOption2 == "Bottom Left" ? position.bottom_left : TabOption2 == "Bottom Center" ? position.bottom_center : position.bottom_right notesbool = false NOTES_M_Bool = input.bool (true, "", group="BIAS & NOTES PRECONFIG", inline="stats2") txt101 = input.string ("NOTES", title="", inline="stats2", group="BIAS & NOTES PRECONFIG") Tab3txtCol = input.color (color.new(#787b86, 0), "", inline='stats2', group="BIAS & NOTES PRECONFIG") TabOption3 = input.string ("Top Center", "", options= , inline="stats2", group="BIAS & NOTES PRECONFIG") tabinp3 = TabOption3 == "Top Left" ? position.top_left : TabOption3 == "Top Center" ? position.top_center : TabOption3 == "Top Right" ? position.top_right : TabOption3 == "Middle Left" ? position.middle_left : TabOption3 == "Middle Right" ? position.middle_right : TabOption3 == "Bottom Left" ? position.bottom_left : TabOption3 == "Bottom Center" ? position.bottom_center : position.bottom_right BIASbool1 = input.bool (true, '', inline="BIAS1", group="BIAS & NOTES") txt52 = input.string ("DXY ", title="", inline="BIAS1", group="BIAS & NOTES") BIASOption1 = input.string ("Unclear", options= , title="", inline="BIAS1", group="BIAS & NOTES") BIASbool2 = input.bool (true, '', inline="BIAS2", group="BIAS & NOTES") txt53 = input.string ("SPX ", title="", inline="BIAS2", group="BIAS & NOTES") BIASOption2 = input.string ("Unclear", options= , title="", inline="BIAS2", group="BIAS & NOTES") BIASbool3 = input.bool (true, '', inline="BIAS3", group="BIAS & NOTES") txt54 = input.string ("DOW ", title="", inline="BIAS3", group="BIAS & NOTES") BIASOption3 = input.string ("Unclear", options= , title="", inline="BIAS3", group="BIAS & NOTES") BIASbool4 = input.bool (true, '', inline="BIAS4", group="BIAS & NOTES") txt55 = input.string ("NAS ", title="", inline="BIAS4", group="BIAS & NOTES") BIASOption4 = input.string ("Unclear", options= , title="", inline="BIAS4", group="BIAS & NOTES") notes = input.text_area ("@smc_trading_br", "Notes", group = "BIAS & NOTES") //--------------------END OF INPUTS--------------------// // Pre-Def DOM = (timeframe.multiplier <= inputMaxInterval) and (timeframe.isintraday) newDay = ta.change(dayofweek) newWeek = ta.change(weekofyear) newMonth = ta.change(time("M")) transparentcol = color.rgb(255,255,255,100) LSVLC = color.rgb(255,255,255,100) NYSVLC = color.rgb(255,255,255,100) PMSVLC = color.rgb(255,255,255,100) ASVLC = color.rgb(255,255,255,100) LSVLS = "dotted" NYSVLS = "dotted" PMSVLS = "dotted" ASVLS = "dotted" // Functions isToday = false if year(timenow) == year(time) and month(timenow) == month(time) and dayofmonth(timenow) == dayofmonth(time) isToday := true // Current Week thisweek = year(timenow) == year(time) and weekofyear(timenow) == weekofyear(time) LastOneWeek = year(timenow) == year(time) and weekofyear(timenow-604800000) == weekofyear(time) LastTwoWeek = year(timenow) == year(time) and weekofyear(timenow-1209600000) == weekofyear(time) LastThreeWeek = year(timenow) == year(time) and weekofyear(timenow-1814400000) == weekofyear(time) LastFourWeek = year(timenow) == year(time) and weekofyear(timenow-2419200000) == weekofyear(time) Last4Weeks = false if thisweek == true or LastOneWeek == true or LastTwoWeek == true or LastThreeWeek == true or LastFourWeek == true Last4Weeks := true // Function to draw Vertical Lines vline(Start, Color, linestyle, LineWidth) => line.new(x1=Start, y1=low - ta.tr, x2=Start, y2=high + ta.tr, xloc=xloc.bar_time, extend=extend.both, color=Color, style=linestyle, width=LineWidth) // Function to convert forex pips into whole numbers atr = ta.atr(14) toWhole(number) => if syminfo.type == "forex" // This method only works on forex pairs _return = atr < 1.0 ? (number / syminfo.mintick) / 10 : number _return := atr >= 1.0 and atr < 100.0 and syminfo.currency == "JPY" ? _return * 100 : _return else number // Function for determining the Start of a Session (taken from the Pinescript manual: www.tradingview.com ) SessionBegins(sess) => t = time("", sess , Timezone) DOM and (not barstate.isfirst) and na(t ) and not na(t) // BarIn Session BarInSession(sess) => time(timeframe.period, sess, Timezone) != 0 // Label Type Logic var SFistrue = true if LabelTextOptioninput == "Time" SFistrue := true else SFistrue := false // Session String to int SeshStartHour(Session) => math.round(str.tonumber(str.substring(Session,0,2))) SeshStartMins(Session) => math.round(str.tonumber(str.substring(Session,2,4))) SeshEndHour(Session) => math.round(str.tonumber(str.substring(Session,5,7))) SeshEndMins(Session) => math.round(str.tonumber(str.substring(Session,7,9))) // Time periods CBDR = "1600-2000:1234567" ASIA = "2000-0000:1234567" FLOUT = "1600-0000:1234567" midsesh = "0000-1600:1234567" cbdrOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(CBDR), SeshStartMins(CBDR), 00) cbdrEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(CBDR), SeshEndMins(CBDR), 00) asiaOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(ASIA), SeshStartMins(ASIA), 00) asiaEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(ASIA), SeshEndMins(ASIA), 00)+86400000 floutOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(FLOUT), SeshStartMins(FLOUT), 00) floutEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(FLOUT), SeshEndMins(FLOUT), 00)+86400000 CBDRTime = time (timeframe.period, CBDR, Timezone) ASIATime = time (timeframe.period, ASIA, Timezone) FLOUTTime = time (timeframe.period, FLOUT, Timezone) LabelOnlyToday = true // Time Periods LondonStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(LDNsesh), SeshStartMins(LDNsesh), 00) LondonEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(LDNsesh), SeshEndMins(LDNsesh), 00) NYStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(NYsesh), SeshStartMins(NYsesh), 00) NYEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(NYsesh), SeshEndMins(NYsesh), 00) LCStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(LCsesh), SeshStartMins(LCsesh), 00) LCEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(LCsesh), SeshEndMins(LCsesh), 00) PMStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(PMsesh), SeshStartMins(PMsesh), 00) PMEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(PMsesh), SeshEndMins(PMsesh), 00) AsianStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(ASIA2sesh), SeshStartMins(ASIA2sesh), 00) AsianEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(ASIA2sesh), SeshEndMins(ASIA2sesh), 00) FreeStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(FreeSesh), SeshStartMins(FreeSesh), 00) FreeEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(FreeSesh), SeshEndMins(FreeSesh), 00) MidnightOpenTime = timestamp(Timezone, year, month, dayofmonth, 0, 0, 00) CLEANUPTIME = timestamp(Timezone, year, month, dayofmonth, 0, 0, 00) - 16200000 LondonOpenTime = timestamp(Timezone, year, month, dayofmonth, 3, 0, 00) NYOpenTime = timestamp(Timezone, year, month, dayofmonth, 8, 30, 00) EquitiesOpenTime = timestamp(Timezone, year, month, dayofmonth, 9, 30, 00) AfternoonOpenTime = timestamp(Timezone, year, month, dayofmonth, 13, 30, 00) tMidnight = time("1", "0000-0001:1234567", Timezone) // Cleanup - Remove old drawing objects Cleanup(days) => // Delete old drawing objects // One day is 86400000 milliseconds removal_timestamp = (CLEANUPTIME) - (days * 86400000) // Remove every drawing object older than the start of the Today's Midnight a_allLines = line.all a_allLabels = label.all a_allboxes = box.all // Remove old lines if array.size(a_allLines) > 0 for i = 0 to array.size(a_allLines) - 1 line_x2 = line.get_x2(array.get(a_allLines, i)) if line_x2 < (removal_timestamp) line.delete(array.get(a_allLines, i)) // Remove old labels if array.size(a_allLabels) > 0 for i = 0 to array.size(a_allLabels) - 1 label_x = label.get_x(array.get(a_allLabels, i)) if label_x < removal_timestamp label.delete(array.get(a_allLabels, i)) // Remove old boxes if array.size(a_allboxes) > 0 for i = 0 to array.size(a_allboxes) - 1 box_x = box.get_right(array.get(a_allboxes, i)) if box_x < (removal_timestamp - 86400000) box.delete(array.get(a_allboxes, i)) // End of Cleanup function // Terminus Function Terminus(Terminus_Inp)=> if Terminus_Inp == "Terminus @ Current Time" _return = timenow else if Terminus_Inp == "Terminus @ Current Time +15min" _return = timenow + 900000 else if Terminus_Inp == "Terminus @ Current Time +30min" _return = timenow + 1800000 else if Terminus_Inp == "Terminus @ Current Time +45min" _return = timenow + 2700000 else if Terminus_Inp == "Terminus @ Current Time +1hr" _return = timenow + 3600000 else if Terminus_Inp == "Terminus @ Current Time +2hr" _return = timenow + 7200000 else _return = timenow + 10800000 // Linestyle Function MNOPLS = Midnight_Open_LS=="Solid" ? line.style_solid : Midnight_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed LNOPLS = london_Open_LS=="Solid" ? line.style_solid : london_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed NWYOPLS = NY_Open_LS=="Solid" ? line.style_solid : NY_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed EQOPLS = Equities_Open_LS=="Solid" ? line.style_solid : Equities_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed MOPLSS = MOPLS=="Solid" ? line.style_solid : MOPLS == "Dotted" ? line.style_dotted : line.style_dashed NYOPLSS = NYOPLS=="Solid" ? line.style_solid : NYOPLS == "Dotted" ? line.style_dotted : line.style_dashed EOPLSS = EOPLS=="Solid" ? line.style_solid : EOPLS == "Dotted" ? line.style_dotted : line.style_dashed AFTOPLSS = AFTOPLS=="Solid" ? line.style_solid : AFTOPLS == "Dotted" ? line.style_dotted : line.style_dashed WeekOpenLS = WOLS=="Solid" ? line.style_solid : WOLS == "Dotted" ? line.style_dotted : line.style_dashed MonthOpenLS = MOLS=="Solid" ? line.style_solid : MOLS == "Dotted" ? line.style_dotted : line.style_dashed // Linewidth Function MOPLW = Midnight_Open_LW=="1px" ? 1 : Midnight_Open_LW == "2px" ? 2 : Midnight_Open_LW == "3px" ? 3 : Midnight_Open_LW == "4px" ? 4 : 5 LOPLW = London_Open_LW=="1px" ? 1 : London_Open_LW == "2px" ? 2 : London_Open_LW == "3px" ? 3 : London_Open_LW == "4px" ? 4 : 5 NYOPLW = NY_Open_LW=="1px" ? 1 : NY_Open_LW == "2px" ? 2 : NY_Open_LW == "3px" ? 3 : NY_Open_LW == "4px" ? 4 : 5 EOPLW = Equities_Open_LW=="1px" ? 1 : Equities_Open_LW == "2px" ? 2 : Equities_Open_LW == "3px" ? 3 : Equities_Open_LW == "4px" ? 4 : 5 MOPPLW = i_MOPLW=="1px" ? 1 : i_MOPLW == "2px" ? 2 : i_MOPLW == "3px" ? 3 : i_MOPLW == "4px" ? 4 : 5 NYOPPLW = i_NYOPLW=="1px" ? 1 : i_NYOPLW == "2px" ? 2 : i_NYOPLW == "3px" ? 3 : i_NYOPLW == "4px" ? 4 : 5 EOPPLW = i_EOPLW=="1px" ? 1 : i_EOPLW == "2px" ? 2 : i_EOPLW == "3px" ? 3 : i_EOPLW == "4px" ? 4 : 5 AFTOPLW = i_AFTOPLW=="1px" ? 1 : i_AFTOPLW == "2px" ? 2 : i_AFTOPLW == "3px" ? 3 : i_AFTOPLW == "4px" ? 4 : 5 WEEKOPPLW = i_WOPLW=="1px" ? 1 : i_WOPLW == "2px" ? 2 : i_WOPLW == "3px" ? 3 : i_WOPLW == "4px" ? 4 : 5 MONTHOPPLW = i_MONPLW=="1px" ? 1 : i_MONPLW == "2px" ? 2 : i_MONPLW == "3px" ? 3 : i_MONPLW == "4px" ? 4 : 5 // Label Size Function LabelSize =LabelSizeInput=="Auto" ? size.auto : LabelSizeInput=="Tiny" ? size.tiny : LabelSizeInput=="Small" ? size.small : LabelSizeInput=="Normal" ? size.normal : LabelSizeInput=="Large" ? size.large : size.huge // Creating Variables var London_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LSVLC, width=1) var London_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LSVLC, width=1) var LondonFill = linefill.new(London_Start_Vline, London_End_Vline, LSFC) var NY_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1) var NY_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1) var NYFill = linefill.new(NY_Start_Vline, NY_End_Vline, NYSFC) var LC_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1) var LC_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1) var LCFill = linefill.new(LC_Start_Vline, LC_End_Vline, LCSFC) var PM_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=PMSVLC, width=1) var PM_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=PMSVLC, width=1) var PMFill = linefill.new(PM_Start_Vline, PM_End_Vline, PMSFC) var Asian_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1) var Asian_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1) var AsianFill = linefill.new(Asian_Start_Vline, Asian_End_Vline, ASFC) var Free_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1) var Free_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1) var FreeFill = linefill.new(Free_Start_Vline, Free_End_Vline, FSFC) var Midnight_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=MOPColor, width=1) var London_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LOPColor, width=1) var NY_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYOPColor, width=1) var Equities_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=EOPColor, width=1) // When a New Day Starts, Start Drawing all lines if newDay and dayofweek != dayofweek.sunday // London Session if (ShowLondon and DOM) if ShowTSO line.delete(London_Start_Vline ) line.delete(London_End_Vline ) linefill.delete(LondonFill ) London_Start_Vline := vline(LondonStartTime,transparentcol, line.style_solid, 1) London_End_Vline := vline(LondonEndTime, transparentcol, line.style_solid, 1) if ShowSFill LondonFill := linefill.new(London_Start_Vline, London_End_Vline, LSFC) // New York Session if (ShowNY and DOM) if ShowTSO line.delete(NY_Start_Vline ) line.delete(NY_End_Vline ) linefill.delete(NYFill ) NY_Start_Vline := vline(NYStartTime, transparentcol, line.style_solid, 1) NY_End_Vline := vline(NYEndTime, transparentcol, line.style_solid, 1) if ShowSFill NYFill := linefill.new(NY_Start_Vline, NY_End_Vline, NYSFC) // London Close if (ShowLC and DOM) if ShowTSO line.delete(LC_End_Vline ) linefill.delete(LCFill ) LC_Start_Vline := vline(LCStartTime, transparentcol, line.style_solid, 1) LC_End_Vline := vline(LCEndTime, transparentcol, line.style_solid, 1) if ShowSFill LCFill := linefill.new(LC_Start_Vline, LC_End_Vline, LCSFC) // PM Session if (ShowPM and DOM) if ShowTSO line.delete(PM_Start_Vline ) line.delete(PM_End_Vline ) linefill.delete(PMFill ) PM_Start_Vline := vline(PMStartTime, transparentcol, line.style_solid, 1) PM_End_Vline := vline(PMEndTime, transparentcol, line.style_solid, 1) if ShowSFill PMFill := linefill.new(PM_Start_Vline, PM_End_Vline, PMSFC) // Asian Session if (ShowAsian and DOM) if ShowTSO line.delete(Asian_Start_Vline ) line.delete(Asian_End_Vline ) linefill.delete(AsianFill ) Asian_Start_Vline := vline(AsianStartTime, transparentcol, line.style_solid, 1) Asian_End_Vline := vline(AsianEndTime, transparentcol, line.style_solid, 1) // if dayofweek == dayofweek.friday // // line.delete(Asian_Start_Vline) // // line.delete(Asian_End_Vline) // Asian_Start_Vline := vline(MidnightOpenTime+244800000, transparentcol, line.style_solid, 1) // Asian_End_Vline := vline(MidnightOpenTime+259200000, transparentcol, line.style_solid, 1) if ShowSFill AsianFill := linefill.new(Asian_Start_Vline, Asian_End_Vline, ASFC) // Free Session if (ShowFreeSesh and DOM) if ShowTSO line.delete(Free_Start_Vline ) line.delete(Free_End_Vline ) linefill.delete(FreeFill ) Free_Start_Vline := vline(FreeStartTime, transparentcol, line.style_solid, 1) Free_End_Vline := vline(FreeEndTime, transparentcol, line.style_solid, 1) if ShowSFill FreeFill := linefill.new(Free_Start_Vline, Free_End_Vline, FSFC) // Midnight Opening Price if (ShowMOP and DOM) if MOLHist == false line.delete(Midnight_Open ) Midnight_Open := vline(MidnightOpenTime, MOPColor, MNOPLS, MOPLW) // London Opening Price if (ShowLOP and DOM) if ShowTSO line.delete(London_Open ) London_Open := vline(LondonOpenTime, LOPColor, LNOPLS, LOPLW) // New York Opening Price if (ShowNYOP and DOM) if ShowTSO line.delete(NY_Open ) NY_Open := vline(NYOpenTime, NYOPColor, NWYOPLS, NYOPLW) // Equities Opening Price if (ShowEOP and DOM) if ShowTSO line.delete(Equities_Open ) Equities_Open := vline(EquitiesOpenTime, EOPColor, EQOPLS, EOPLW) // Variables var label MOPLB = na var line MOPLN = na var label NYOPLB = na var line NYOPLN = na var label EOPLB = na var line EOPLN = na var line AFTLN = na var label AFTLB = na // New York Midnight Open Price line var openMidnight = 0.0 if tMidnight if not tMidnight openMidnight := open else openMidnight := math.max(open, openMidnight) if (ShowMOPP and (openMidnight != openMidnight ) and DOM and barstate.isconfirmed) label.delete(MOPLB ) if ShowMOPL == false line.delete(MOPLN ) MOPLN := line.new(x1=tMidnight, y1=openMidnight, x2=tMidnight+86400000, xloc=xloc.bar_time, y2=openMidnight, color=MOPColP, style=MOPLSS, width=MOPPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(MOPLN, tMidnight+259200000) if ShowLabel MOPLB := label.new(x=tMidnight+86400000, y=openMidnight, xloc=xloc.bar_time, color=LabelColor, textcolor=MOPColP, style=label.style_label_left, size=LabelSize, tooltip="Midnight Opening Price") if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(MOPLB, tMidnight+259200000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(MOPLB, " 00:00 | " + str.tostring(open)) else label.set_text(MOPLB, " 00:00 ") label.set_tooltip(MOPLB, "Midnight Opening Price") else if ShowPrices == true label.set_text(MOPLB, " Midnight Opening Price | " + str.tostring(open)) else label.set_text(MOPLB, " Midnight Opening Price ") label.set_tooltip(MOPLB, "") label.set_textcolor(MOPLB, LabelTextColor) label.set_size(MOPLB,LabelSize) if time > PMEndTime and time < (MidnightOpenTime + 86400000) line.delete(MOPLN ) if Terminusinp != "Terminus @ Next Midnight" and ShowMOPL == false line.set_x2(MOPLN, Terminus(Terminusinp)) label.set_x(MOPLB, Terminus(Terminusinp)) // New York Opening Price Line if (ShowNYOPP and (time == NYOpenTime) and DOM) label.delete(NYOPLB ) if ShowPrev == false line.delete(NYOPLN ) NYOPLN := line.new(x1=NYOpenTime, y1=open, x2=NYOpenTime+55800000, xloc=xloc.bar_time, y2=open, color=NYOPColP, style=NYOPLSS, width=NYOPPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(NYOPLN, NYOpenTime+228600000) if ShowLabel NYOPLB := label.new(x=NYOpenTime+55800000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=NYOPColP, style=label.style_label_left, size=LabelSize, tooltip="New York Opening Price") if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(NYOPLB, NYOpenTime+228600000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(NYOPLB, " 08:30 | " + str.tostring(open)) else label.set_text(NYOPLB, " 08:30 ") label.set_tooltip(NYOPLB, "New York Opening Price") else if ShowPrices == true label.set_text(NYOPLB, " New York Opening Price | " + str.tostring(open)) else label.set_text(NYOPLB, " New York Opening Price ") label.set_tooltip(NYOPLB, "") label.set_textcolor(NYOPLB, LabelTextColor) label.set_size(NYOPLB,LabelSize) if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false line.set_x2(NYOPLN, Terminus(Terminusinp)) label.set_x(NYOPLB, Terminus(Terminusinp)) // Equities Opening Price Line if (ShowEOPP and (time == EquitiesOpenTime) and DOM) label.delete(EOPLB ) if ShowPrev == false line.delete(EOPLN ) EOPLN := line.new(x1=EquitiesOpenTime, y1=open, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=open, color=EOPColP, style=EOPLSS, width=EOPPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(EOPLN, EquitiesOpenTime+225000000) if ShowLabel EOPLB := label.new(x=EquitiesOpenTime+52200000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=EOPColP, style=label.style_label_left, size=LabelSize, tooltip="Equities Opening Price") if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(EOPLB, EquitiesOpenTime+225000000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(EOPLB, " 09:30 | " + str.tostring(open)) else label.set_text(EOPLB, " 09:30 ") label.set_tooltip(EOPLB, "Equities Opening Price") else if ShowPrices == true label.set_text(EOPLB, " Equities Opening Price | " + str.tostring(open)) else label.set_text(EOPLB, " Equities Opening Price ") label.set_tooltip(EOPLB, "") label.set_textcolor(EOPLB, LabelTextColor) label.set_size(EOPLB,LabelSize) if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false line.set_x2(EOPLN, Terminus(Terminusinp)) label.set_x(EOPLB, Terminus(Terminusinp)) // Afternoon Opening Price Line if (ShowAFTPP and (time == AfternoonOpenTime) and DOM) label.delete(AFTLB ) if ShowPrev == false line.delete(AFTLN ) AFTLN := line.new(x1=AfternoonOpenTime, y1=open, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=open, color=AFTOPColP, style=AFTOPLSS, width=AFTOPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(AFTLN, EquitiesOpenTime+225000000) if ShowLabel AFTLB := label.new(x=EquitiesOpenTime+52200000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=AFTOPColP, style=label.style_label_left, size=LabelSize, tooltip="Equities Opening Price") if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(AFTLB, EquitiesOpenTime+225000000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(AFTLB, " 01:30 | " + str.tostring(open)) else label.set_text(AFTLB, " 01:30 ") label.set_tooltip(AFTLB, " Afternoon Opening Price") else if ShowPrices == true label.set_text(AFTLB, " Afternoon Opening Price | " + str.tostring(open)) else label.set_text(AFTLB, " Afternoon Opening Price ") label.set_tooltip(AFTLB, "") label.set_textcolor(AFTLB, LabelTextColor) label.set_size(AFTLB,LabelSize) if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false line.set_x2(AFTLN, Terminus(Terminusinp)) label.set_x(AFTLB, Terminus(Terminusinp)) // HTF Variables var Weekly_open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=i_WeekOpenCol, style=WeekOpenLS, width=1) var Weekly_openlbl = label.new(x=na, y=na, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize) var WeeklyOpenTime = time var Monthly_open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=i_MonthOpenCol, style=MonthOpenLS, width=1) var Monthly_openlbl = label.new(x=na, y=na, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize) var MonthlyOpenTime = time // Get HTF Price levels WeeklyOpen = request.security(syminfo.tickerid, "W", open, lookahead = barmerge.lookahead_on) MonthlyOpen = request.security(syminfo.tickerid, "M", open, lookahead = barmerge.lookahead_on) // Weekly Open if newWeek WeeklyOpenTime := time if ShowWeekOpen and newDay and Last4Weeks label.delete(Weekly_openlbl ) line.delete(Weekly_open ) // if ShowPrev == false // line.delete(Weekly_open ) Weekly_open:= line.new(x1=WeeklyOpenTime-25200000, y1=WeeklyOpen, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=WeeklyOpen, color=i_WeekOpenCol, style=WeekOpenLS, width=WEEKOPPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(Weekly_open, EquitiesOpenTime+225000000) if ShowLabel Weekly_openlbl := label.new(x=EquitiesOpenTime+52200000, y=WeeklyOpen, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize, tooltip="Weekly Open: " + str.tostring(WeeklyOpen)) if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(Weekly_openlbl, EquitiesOpenTime+225000000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(Weekly_openlbl," W.O. | " + str.tostring(WeeklyOpen)) else label.set_text(Weekly_openlbl," W.O. ") label.set_tooltip(Weekly_openlbl, " Weekly Opening Price ") else if ShowPrices == true label.set_text(Weekly_openlbl," Weekly Open | " + str.tostring(WeeklyOpen)) else label.set_text(Weekly_openlbl," Weekly Open ") label.set_tooltip(Weekly_openlbl, "") label.set_textcolor(Weekly_openlbl, LabelTextColor) label.set_size(Weekly_openlbl, LabelSize) if timeframe.multiplier > 60 line.set_x2(Weekly_open, AsianEndTime + 232000000) label.set_x(Weekly_openlbl, AsianEndTime + 232000000) if timeframe.period == "D" line.set_x2(Weekly_open, AsianEndTime + 832000000) label.set_x(Weekly_openlbl, AsianEndTime + 832000000) if timeframe.period == "M" line.delete(Weekly_open) label.delete(Weekly_openlbl) if Terminusinp != "Terminus @ Next Midnight" and DOM line.set_x2(Weekly_open, Terminus(Terminusinp)) label.set_x(Weekly_openlbl, Terminus(Terminusinp)) // Monthly Open if newMonth MonthlyOpenTime := time if showMonthOpen and newDay line.delete(Monthly_open ) label.delete(Monthly_openlbl ) Monthly_open:= line.new(x1=MonthlyOpenTime, y1=MonthlyOpen, x2=AsianEndTime, xloc=xloc.bar_time, y2=MonthlyOpen, color=i_MonthOpenCol, style=MonthOpenLS, width=MONTHOPPLW) if dayofweek == dayofweek.friday and syminfo.type != "crypto" line.set_x2(Monthly_open, EquitiesOpenTime+225000000) if ShowLabel Monthly_openlbl := label.new(x=AsianEndTime, y=MonthlyOpen, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize, tooltip="Monthly Open: " + str.tostring(MonthlyOpen)) if dayofweek == dayofweek.friday and syminfo.type != "crypto" label.set_x(Monthly_openlbl, EquitiesOpenTime+225000000) if ShowLabelText if SFistrue if ShowPrices == true label.set_text(Monthly_openlbl," M.O. | " + str.tostring(MonthlyOpen)) else label.set_text(Monthly_openlbl," M.O. ") label.set_tooltip(Monthly_openlbl, " Monthly Opening Price ") else if ShowPrices == true label.set_text(Monthly_openlbl, " Monthly Open | " + str.tostring(MonthlyOpen)) else label.set_text(Monthly_openlbl, " Monthly Open ") label.set_tooltip(Monthly_openlbl, "") label.set_textcolor(Monthly_openlbl, LabelTextColor) label.set_size(Monthly_openlbl, LabelSize) if timeframe.multiplier > 60 line.set_x2(Monthly_open, AsianEndTime + 232000000) label.set_x(Monthly_openlbl, AsianEndTime + 232000000) if timeframe.period == "D" line.set_x2(Monthly_open, AsianEndTime + 832000000) label.set_x(Monthly_openlbl, AsianEndTime + 832000000) if timeframe.period == "W" line.set_x2(Monthly_open, AsianEndTime + 2592000000) label.set_x(Monthly_openlbl, AsianEndTime + 2592000000) if timeframe.period == "M" line.delete(Monthly_open) label.delete(Monthly_openlbl) if Terminusinp != "Terminus @ Next Midnight" and DOM line.set_x2(Monthly_open, Terminus(Terminusinp)) label.set_x(Monthly_openlbl, Terminus(Terminusinp)) // CBDR Stuff var float cbdr_hi = na var float cbdr_lo = na var float cbdr_diff = na var box cbdrbox = na var line cbdr_hi_line = na var line cbdr_lo_line = na var line dev01negline = na var line dev02negline = na var line dev03negline = na var line dev04negline = na var line dev01posline = na var line dev02posline = na var line dev03posline = na var line dev04posline = na if SessionBegins(CBDR) and DOM cbdr_hi := high cbdr_lo := low cbdr_diff := cbdr_hi - cbdr_lo if ShowTSO box.delete(cbdrbox ) line.delete(dev01posline ) line.delete(dev01negline ) line.delete(dev02posline ) line.delete(dev02negline ) line.delete(dev03posline ) line.delete(dev03negline ) line.delete(dev04posline ) line.delete(dev04negline ) if ShowCBDR cbdrbox := box.new(cbdrOpenTime, cbdr_hi, cbdrEndTime, cbdr_lo, color.new(CBDRBoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(CBDRBoxCol,90), txt0, size.auto, color.new(box_text_cbdr_col,80), text_wrap=text.wrap_auto) if dayofweek == dayofweek.friday box.set_right(cbdrbox, cbdrOpenTime+187200000) line.set_x2(cbdr_hi_line, cbdrOpenTime+187200000) line.set_x2(cbdr_lo_line, cbdrOpenTime+187200000) if box_text_cbdr == false box.set_text(cbdrbox, "") if ShowDev and ShowCBDR and bool_cbdr_dev for i = 1 to DevCount by 1 if i == 1 dev01posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_hi + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev01negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev01posline, cbdrOpenTime+187200000) line.set_x2(dev01negline, cbdrOpenTime+187200000) if i == 2 dev02posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev02negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev02posline, cbdrOpenTime+187200000) line.set_x2(dev02negline, cbdrOpenTime+187200000) if i == 3 dev03posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev03negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev03posline, cbdrOpenTime+187200000) line.set_x2(dev03negline, cbdrOpenTime+187200000) if i == 4 dev04posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev04negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev04posline, cbdrOpenTime+187200000) line.set_x2(dev04negline, cbdrOpenTime+187200000) else if CBDRTime cbdr_hi := math.max(high, cbdr_hi) cbdr_lo := math.min(low, cbdr_lo) cbdr_diff := cbdr_hi - cbdr_lo for i = 1 to DevCount by 1 if i == 1 and ShowDev line.set_y1(dev01posline, cbdr_hi + cbdr_diff * i) line.set_y2(dev01posline, cbdr_hi + cbdr_diff * i) line.set_y1(dev01negline, cbdr_lo - cbdr_diff * i) line.set_y2(dev01negline, cbdr_lo - cbdr_diff * i) if i == 2 and ShowDev line.set_y1(dev02posline, cbdr_hi + cbdr_diff * i) line.set_y2(dev02posline, cbdr_hi + cbdr_diff * i) line.set_y1(dev02negline, cbdr_lo - cbdr_diff * i) line.set_y2(dev02negline, cbdr_lo - cbdr_diff * i) if i == 3 and ShowDev line.set_y1(dev03posline, cbdr_hi + cbdr_diff * i) line.set_y2(dev03posline, cbdr_hi + cbdr_diff * i) line.set_y1(dev03negline, cbdr_lo - cbdr_diff * i) line.set_y2(dev03negline, cbdr_lo - cbdr_diff * i) if i == 4 and ShowDev line.set_y1(dev04posline, cbdr_hi + cbdr_diff * i) line.set_y2(dev04posline, cbdr_hi + cbdr_diff * i) line.set_y1(dev04negline, cbdr_lo - cbdr_diff * i) line.set_y2(dev04negline, cbdr_lo - cbdr_diff * i) if (cbdr_hi > cbdr_hi ) if ShowCBDR box.set_top(cbdrbox, cbdr_hi) if (cbdr_lo < cbdr_lo ) if ShowCBDR box.set_bottom(cbdrbox, cbdr_lo) if DevDirection == "Upside Only" line.delete(dev01negline) line.delete(dev02negline) line.delete(dev03negline) line.delete(dev04negline) else if DevDirection == "Downside Only" line.delete(dev01posline) line.delete(dev02posline) line.delete(dev03posline) line.delete(dev04posline) // ASIA Stuff var float asia_hi = na var float asia_lo = na var float asia_diff = na var box asia_box = na var line asia_hi_line = na var line asia_lo_line = na var line dev01negline_asia = na var line dev02negline_asia = na var line dev03negline_asia = na var line dev04negline_asia = na var line dev01posline_asia = na var line dev02posline_asia = na var line dev03posline_asia = na var line dev04posline_asia = na if SessionBegins(ASIA) and DOM asia_hi := high asia_lo := low asia_diff := asia_hi - asia_lo if ShowTSO box.delete(asia_box ) line.delete(dev01posline_asia ) line.delete(dev01negline_asia ) line.delete(dev02posline_asia ) line.delete(dev02negline_asia ) line.delete(dev03posline_asia ) line.delete(dev03negline_asia ) line.delete(dev04posline_asia ) line.delete(dev04negline_asia ) if ShowASIA asia_box := box.new(asiaOpenTime, asia_hi, asiaEndTime, asia_lo, color.new(ASIABoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(ASIABoxCol,90), txt1, size.auto, color.new(box_text_asia_col,80), text_wrap=text.wrap_auto) if box_text_asia == false box.set_text(asia_box, "") if ShowDev and ShowASIA and bool_asia_dev for i = 1 to DevCount by 1 if i == 1 dev01posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_hi + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev01negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if i == 2 dev02posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev02negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if i == 3 dev03posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev03negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if i == 4 dev04posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev04negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) else if ASIATime asia_hi := math.max(high, asia_hi) asia_lo := math.min(low, asia_lo) asia_diff := asia_hi - asia_lo for i = 1 to DevCount by 1 if i == 1 and ShowDev line.set_y1(dev01posline_asia, asia_hi + asia_diff * i) line.set_y2(dev01posline_asia, asia_hi + asia_diff * i) line.set_y1(dev01negline_asia, asia_lo - asia_diff * i) line.set_y2(dev01negline_asia, asia_lo - asia_diff * i) if i == 2 and ShowDev line.set_y1(dev02posline_asia, asia_hi + asia_diff * i) line.set_y2(dev02posline_asia, asia_hi + asia_diff * i) line.set_y1(dev02negline_asia, asia_lo - asia_diff * i) line.set_y2(dev02negline_asia, asia_lo - asia_diff * i) if i == 3 and ShowDev line.set_y1(dev03posline_asia, asia_hi + asia_diff * i) line.set_y2(dev03posline_asia, asia_hi + asia_diff * i) line.set_y1(dev03negline_asia, asia_lo - asia_diff * i) line.set_y2(dev03negline_asia, asia_lo - asia_diff * i) if i == 4 and ShowDev line.set_y1(dev04posline_asia, asia_hi + asia_diff * i) line.set_y2(dev04posline_asia, asia_hi + asia_diff * i) line.set_y1(dev04negline_asia, asia_lo - asia_diff * i) line.set_y2(dev04negline_asia, asia_lo - asia_diff * i) if (asia_hi > asia_hi ) box.set_top(asia_box, asia_hi) if (asia_lo < asia_lo ) box.set_bottom(asia_box, asia_lo) if DevDirection == "Upside Only" line.delete(dev01negline_asia) line.delete(dev02negline_asia) line.delete(dev03negline_asia) line.delete(dev04negline_asia) else if DevDirection == "Downside Only" line.delete(dev01posline_asia) line.delete(dev02posline_asia) line.delete(dev03posline_asia) line.delete(dev04posline_asia) // FLOUT Stuff var float flout_hi = na var float flout_lo = na var float flout_diff = na var box floutbox = na var line flout_hi_line = na var line flout_lo_line = na var line dev01negline_flout = na var line dev02negline_flout = na var line dev03negline_flout = na var line dev04negline_flout = na var line dev01posline_flout = na var line dev02posline_flout = na var line dev03posline_flout = na var line dev04posline_flout = na if SessionBegins(FLOUT) and DOM flout_hi := high flout_lo := low flout_diff := flout_hi - flout_lo if ShowTSO box.delete(floutbox ) line.delete(dev01posline_flout ) line.delete(dev01negline_flout ) line.delete(dev02posline_flout ) line.delete(dev02negline_flout ) line.delete(dev03posline_flout ) line.delete(dev03negline_flout ) line.delete(dev04posline_flout ) line.delete(dev04negline_flout ) if ShowFLOUT floutbox := box.new(floutOpenTime, flout_hi, floutEndTime, flout_lo, color.new(FLOUTBoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(FLOUTBoxCol,90), txt7, size.auto, color.new(box_text_flout_col,80), text_wrap=text.wrap_auto) if dayofweek == dayofweek.friday box.set_right(floutbox, floutOpenTime+201600000) line.set_x2(flout_hi_line, floutOpenTime+201600000) line.set_x2(flout_lo_line, floutOpenTime+201600000) if box_text_cbdr == false box.set_text(floutbox, "") if ShowDev and ShowFLOUT and bool_flout_dev for i = 0.5 to DevCount by 0.5 if i == 0.5 dev01posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_hi + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev01negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev01posline_flout, floutOpenTime+201600000) line.set_x2(dev01negline_flout, floutOpenTime+201600000) if i == 1 dev02posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev02negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev02posline_flout, floutOpenTime+201600000) line.set_x2(dev02negline_flout, floutOpenTime+201600000) if i == 1.5 dev03posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev03negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev03posline_flout, floutOpenTime+201600000) line.set_x2(dev03negline_flout, floutOpenTime+201600000) if i == 2 dev04posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) dev04negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW) if dayofweek == dayofweek.friday line.set_x2(dev04posline_flout, floutOpenTime+201600000) line.set_x2(dev04negline_flout, floutOpenTime+201600000) else if FLOUTTime flout_hi := math.max(high, flout_hi) flout_lo := math.min(low, flout_lo) flout_diff := flout_hi - flout_lo for i = 0.5 to DevCount by 0.5 if i == 0.5 and ShowDev line.set_y1(dev01posline_flout, flout_hi + flout_diff * i) line.set_y2(dev01posline_flout, flout_hi + flout_diff * i) line.set_y1(dev01negline_flout, flout_lo - flout_diff * i) line.set_y2(dev01negline_flout, flout_lo - flout_diff * i) if i == 1 and ShowDev line.set_y1(dev02posline_flout, flout_hi + flout_diff * i) line.set_y
Indicatore Pine Script®
di CarlosNepomuceno