Inizia

Cerca negli script per "Buy sell"

Ema ScalpThis is another simple strategy based on ema Entry Buy - 1) when close crossover ema then buy and only open one trade till it not close 2) if previous buy trade is profitable open another trade and check again trade is profitable or not 3)if trade is not profitable reset and wait for sell condition... Entry Sell -1) when close crossunder ema then sell and only open one trade till it not close 2) if previous sell trade is profitable open another trade and check again trade is profitable or not 3) if trade is not profitable reset and wait for buy condition..... stop loss and take profit is percentage based ...
Strategia Pine Script®
di Shauryam_or
5
Strategy Myth-Busting #12 - OSGFC+SuperTrend - [MYN]This is part of a new series we are calling "Strategy Myth-Busting" where we take open public manual trading strategies and automate them. The goal is to not only validate the authenticity of the claims but to provide an automated version for traders who wish to trade autonomously. Our 12th one is an automated version of the "The Most Powerful Tradingview Buy Sell Signal Indicator " strategy from "Power of Trading" who doesn't make any official claims but watching how he trades with this, it on the surface looked promising. The strategy author uses this on the 15 min strategy on mostly FOREX. Unfortunately as indicated by the backtest results below, we were not able to substantiate any good positive trading metrics from this, be it Profit, Markdown, Num Of Trades etc. This does seem to do okay with some entries but perhaps adding another indicator to this to filter out more noise might make it better. At least how this strategy is presented now, this is not something I recommend anyone use. This strategy uses a combination of 2 open-source public indicators: SuperTrend by TradingView Internal One-Sided Gaussian Filter w/ Channels By Loxx The SuperTrend indicator and the One-Sided Gaussian Filter complement each other by providing a more complete and accurate picture of market trends. The SuperTrend indicator is used to identify trends. It does this by calculating a moving average of the underlying securities price and then comparing the current price to the moving average. When the current price is above the moving average, the trend is considered bullish, and when it is below, the trend is considered bearish. The One-Sided Gaussian Filter is a mathematical tool that is used to smooth out fluctuations in financial data. It does this by removing random noise from the data, making it easier to identify patterns and trends. When the SuperTrend indicator is used in conjunction with the One-Sided Gaussian Filter, the smoothed price data generated by the filter is used as the input for the SuperTrend calculation. This provides a more accurate representation of market trends and helps to eliminate false signals generated by short-term price movements. As a result, the SuperTrend indicator is able to more accurately identify the underlying trend in the market and provide traders with a cleaner and more reliable signal to act upon. In summary, the SuperTrend indicator and the One-Sided Gaussian Filter complement each other by providing a more accurate and reliable representation of market trends, resulting in improved performance for traders. If you know of or have a strategy you want to see myth-busted or just have an idea for one, please feel free to message me. Trading Rules 15 min candles FOREX or Crypto Stop loss at swing high/low | 1.5 risk/ratio Long Condition SuperTrend and OSGFC generate buy signal Close Buy on Gaussian generating a sell signal Short Condition SuperTrend and OSGFC generate sell signal Close Buy on Gaussian generating a buy signal
Strategia Pine Script®
di myncrypto
3
Ultimate Strategy Template (Advanced Edition)Hello traders This script is an upgraded version of that one below New features - Upgraded to Pinescript version 5 - Added the exit SL/TP now in real-time - Added text fields for the alerts - easier to send the commands to your trading bots Step 1: Create your connector Adapt your indicator with only 2 lines of code and then connect it to this strategy template. For doing so: 1) Find in your indicator where are the conditions printing the long/buy and short/sell signals. 2) Create an additional plot as below I'm giving an example with a Two moving averages cross. Please replicate the same methodology for your indicator wether it's a MACD , ZigZag , Pivots , higher-highs, lower-lows or whatever indicator with clear buy and sell conditions. //@version=5 indicator(title='Moving Average Cross', shorttitle='Moving Average Cross', overlay=true, precision=6, max_labels_count=500, max_lines_count=500) type_ma1 = input.string(title='MA1 type', defval='SMA', options= ) length_ma1 = input(10, title=' MA1 length') type_ma2 = input.string(title='MA2 type', defval='SMA', options= ) length_ma2 = input(100, title=' MA2 length') // MA f_ma(smoothing, src, length) => rma_1 = ta.rma(src, length) sma_1 = ta.sma(src, length) ema_1 = ta.ema(src, length) iff_1 = smoothing == 'EMA' ? ema_1 : src iff_2 = smoothing == 'SMA' ? sma_1 : iff_1 smoothing == 'RMA' ? rma_1 : iff_2 MA1 = f_ma(type_ma1, close, length_ma1) MA2 = f_ma(type_ma2, close, length_ma2) // buy and sell conditions buy = ta.crossover(MA1, MA2) sell = ta.crossunder(MA1, MA2) plot(MA1, color=color.new(color.green, 0), title='Plot MA1', linewidth=3) plot(MA2, color=color.new(color.red, 0), title='Plot MA2', linewidth=3) plotshape(buy, title='LONG SIGNAL', style=shape.circle, location=location.belowbar, color=color.new(color.green, 0), size=size.normal) plotshape(sell, title='SHORT SIGNAL', style=shape.circle, location=location.abovebar, color=color.new(color.red, 0), size=size.normal) /////////////////////////// SIGNAL FOR STRATEGY ///////////////////////// Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title='🔌Connector🔌', display = display.data_window) Basically, I identified my buy, sell conditions in the code and added this at the bottom of my indicator code Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Important Notes 🔥 The Strategy Template expects the value to be exactly 1 for the bullish signal, and -1 for the bearish signal Now you can connect your indicator to the Strategy Template using the method below or that one Step 2: Connect the connector 1) Add your updated indicator to a TradingView chart 2) Add the Strategy Template as well to the SAME chart 3) Open the Strategy Template settings and in the Data Source field select your 🔌Connector🔌 (which comes from your indicator) From then, you should start seeing the signals and plenty of other stuff on your chart 🔥 Note that whenever you'll update your indicator values, the strategy statistics and visual on your chart will update in real-time Settings - Color Candles: Color the candles based on the trade state ( bullish , bearish , neutral) - Close positions at market at the end of each session: useful for everything but cryptocurrencies - Session time ranges: Take the signals from a starting time to an ending time - Close Direction: Choose to close only the longs, shorts, or both - Date Filter: Take the signals from a starting date to an ending date - Set the maximum losing streak length with an input - Set the maximum winning streak length with an input - Set the maximum consecutive days with a loss - Set the maximum drawdown (in % of strategy equity) - Set the maximum intraday loss in percentage - Limit the number of trades per day - Limit the number of trades per week - Stop-loss: None or Percentage or Trailing Stop Percentage or ATR - I'll add shortly multiple options for the trailing stop loss - Take-Profit: None or Percentage or ATR - I'll add also a trailing take profit - Risk-Reward based on ATR multiple for the Stop-Loss and Take-Profit Special Thanks Special thanks to @JosKodify as I borrowed a few risk management snippets from his website: kodify.net Best Dave
Strategia Pine Script®
di Daveatt
107
Davin's 10/200MA Pullback on SPY Strategy v2.0Strategy: Using 10 and 200 Simple moving averages, we capitalize on price pullbacks on a general uptrend to scalp 1 - 5% rebounds. 200 MA is used as a general indicator for bullish sentiment, 10 MA is used to identify pullbacks in the short term for buy entries. An optional bonus: market crash of 20% from 52 days high is regarded as a buy the dip signal. An optional bonus: can choose to exit on MA crossovers using 200 MA as reference MA (etc. Hard stop on 50 cross 200) Recommended Ticker: SPY 1D (I have so far tested on SPY and other big indexes only, other stocks appear to be too volatile to use the same short period SMA parameters effectively) + AAPL 4H How it works: Buy condition is when: - Price closes above 200 SMA - Price closes below 10 SMA - Price dumps at least 20% (additional bonus contrarian buy the dip option) Entry is on the next opening market day the day after the buy condition candle was fulfilled. Sell Condition is when: - Prices closes below 10 SMA - Hard stop at 15% drawdown from entry price (adjustable parameter) - Hard stop at medium term and long term MA crossovers (adjustable parameters) So far this strategy has been pretty effective for me, feel free to try it out and let me know in the comments how you found :) Feel free to suggest new strategy ideas for discussion and indicator building
Strategia Pine Script®
di Gold_D_Roger
5
Trend Breakout high/low #1What is the Trend Breakout high/low #1? This script uses the high/low of each fixed time period as a conditional judgment, and when the high/low is broken as a buy/sell signal, trying to capture a trend. How to use this script? Start date and Stop date: You can choose the date of the test. Trading cycle: Selected time period is used as the basis for determining the high/low and is limited to one trade only. Stop range: This value will calculate the stop loss range. Set 50-100 that is better Fixed mode: Fixed of lots per transaction. ---Additional Functions--- Reversal mode: Reversing the buy and sell signals, may be useful in certain situations. Wighted mode: Increased profitability under certain conditions When win & When lose:Judgment when there is an ongoing loss/profit as a condition, may be useful in certain situations. Use closing price: Use the closing price breakout high/low as a conditional judgment, but this function sometimes fails. Notes: Trading cycle and your chart time period can't be set too close,that will result repainting. Stop range can't be set too small,that will result repainting either.
Strategia Pine Script®
di zxcv55602
1
X48 - Strategy | MA Type Cross + TPSL | Future&Spot | V.2Thank You For Open Source Code, This Strategy Ref. By 1.Simple Strategy Like MA Crossover For Long/Short or Spot Trade, 2. CDC Action Zone V.2 for BarPaint This Strategy Mixing With MA Crossover Strategy and BarPaint By CDC Action Zone and TP/SL by Varbara ### How To Use Strategy : Setting EMA/SMA Crossover EMA/SMA, Any Value If You Want For Long Position : Cross Up For Short Position : Cross Down Can Use With Spot Trade : Cross Up = Buy, Cross Down = Sell TP/SL When Your OrderSize Change From any % Of Your TP/SL Value ### In Strategy Setting Intitial Capital = Ex. 200 Order Size = Should Be Money Management Not Use 100% of Capital Ex. 10% of Capital (200$) = Order Size 20$ StopLoss and Take Profit = If You Run Trend TF 4H+ or 1D+ You Can Change TP% = 1,000% for nonlimit and Stop Loss 5 - 20% from your order size Ex. Stoploss 15% = OrderSize / 100 x %SL = 20$/100 x 15% = 3$ Loss from order size 20$ (if you not set stop loss.) Base Currency = (Your Currency) # Ex. USD Commission = (Your Trading Fee) # Ex. Future Fee Can Check At Binance Fee Rate > www.binance.com > Choose Your Fee Type, Ex. USD M Future (Regular User) = 0.02 (Maker), 0.04 (Taker) Commission Symbol Type = % # (Ref. By Binance Fee Rate) ### Notice #### Default Setting It's Realistic From Normal Life Ex. Capital 200$ / Ordersize 20$ (10%)/ Commission 0.1% (Buy+Sell) / Slippage = 2 / TP = 1000% (nonlimit) / SL = 15%/OrderSize Low Risk But High Return, Good Luck ### Bot Auto Trade by X4815162342 ### if you wanna try my bot auto trade X48-3in1-bot : Contact My Line ID : x4815x Full Command Alert For This Strategy If You Wanna See It's '{"ex":"'+markettype+'","side": "'+longcommand+'", "amount": "@{{strategy.order.contracts}}", "symbol": "{{ticker}}", "passphrase": "'+passphrase+'","leverage":"'+str.tostring(leveragex)+'"}' '{"ex":"'+markettype+'","side": "'+shortcommand+'", "amount": "@{{strategy.order.contracts}}", "symbol": "{{ticker}}", "passphrase": "'+passphrase+'","leverage":"'+str.tostring(leveragex)+'"}' But Easy Than Full Command Just Use Thisssssss !! Strategy Be Manage Auto Long and Short or TPSL Position You Don't Do Anything Just Use This Message to Alerts Message {{strategy.order.alert_message}} ### If you don't use bot but just looking for strategy test #### Just Pass Bot Setting Function It's Nothing Effect For Strategy !!!!!! Let's Enjoy With Your Strategy BackTest 😁 Remember Beware Max drawdown%. I'm Recommend Lower Than 10% It's Very Good.
Strategia Pine Script®
di X4815162342
7
ALMA/EMA/SRSI Strategy + IndicatorBack with another great high hit rate strategy!! Disclaimer* This strategy was sampled using source code written by @ClassicScott , as referred to in the script, there is a clear line where the source code was scripted by myself. This Strategy consists of three key factors, the ALMA, EMA crossover, and a Stochastic Rsi ALMA: The Alma is the step line shown, turning green and red at select times. This average value gives general oversight of the macro movement of price action. and this particular one was coded by Mr.ClassicScott. EMA crossover: At the input screen you are given an option of the fast and slow ema's. The default is solely for the hit rate and correlation to the Alma of this strategy. The arrows you see depicted on the chart are the crossover events happening. Stochastic Rsi: The Stochastic Rsi is a stochastic value, using data sampled from the rsi. The use of this indicator in my strategy is to prevent entries when too overbought and oversold, as well as closures and vice versa, to prevent holding bags either way. Fixed % TP: In the input screen you are given a take profit and stop loss percentage, for good R/R the hit rate will take a notch down, but with no R/R it will be near perfect. How to use this: Add it to your chart to get the strategy inputs. (The strategy is really only useful on a 15min TF. However the indicator within it can be used on anything at anytime!) Watch the yellow and aqua moving averages, these are your ema's and crossover's will trigger signals based on your integer inputs. Find Correlation between other leading indicators, as well as crossover's down/up and a red/green alma. DO NOT use the arrows as buy/sell signals. These are simply to show ema's are crossing under or over. Momentum indicator's paired with this can be useful to determine if it could be a buy signal or sell signal. Cheat Code's Notes: Almost at 1000 boosts!!! I appreciate the support from everyone and I will keep trying my best to deliver quality strategies for the people. -Cheat Code BYBIT:BTCUSDT
Strategia Pine Script®
di CheatCode1
16
5MSM VISHNU5MSM VISHNU Indicator for Trending Markets originally written by patrick1994. It was originally based on the MACD 12-26 and the 50 bar EMA . The macd hist is color coded with green as buy and sell as red. I added an option to use a couple of lower lag ema's (See line 13 - ema_signal). 5MSM VISHNU with MACD Indicator for Trending Markets Originally written by Trading Rush Note that the user may choose lower lags to compute the MACD signals added lower lag ema functions - see lines 21 to 30 added plot for the MACD signal 'hist' - computed in lines 36 to 41 The extra MACD line was added for clarity for the placement of the buy sell signals.
Strategia Pine Script®
di patrick199415
20
Cipher B divergencies for Crypto (Finandy support)Hello Traders! In times of high volatility, it is important to follow a market-neutral strategy to protect your hard-earned assets. The simple script employs common buy/sell and/or divergencies signals from the VuManChu Cipher B indicator with fixed stop losses and takes profits. The signals are filtered by a local trend of a coin of interest and the global trend of Bitcoin. These trends-filtered signals demonstrated better performance on most of the back- and forward- tests for USDT cryptocurrency futures. The strategy is based on my real experience, it's a diamond I want to share with you. In terms of visualization if the background is red and the price is below the yellow line then only a short position can be opened. Conversely, if the price is above the yellow line AND the background is green only a long position can be opened. Inputs from VuManChu you can find on the top. Frankly, I do not know how they can help you to improve the performance of the strategy. My inputs of the script you can find in "Trend Settings" and "TP/SL Settings" at the bottom. The checkbox "Only divergencies" lets to broadcast only more reliable buy/sell signals for a cost of rare deals. The checkbox "Cancel all positions if price crosses local sma?" makes additional trailing stop loss. Usually, this function increases the win rate by "smoothing" the risk/reward ratio, as a usual stop loss does. You can tune SL/TP based on backtesting. To connect the script to Finandy just edit "name" and "secret" to connect your webhook (see the bottom of the script). The rule of thumb for the strategy is "only divergencies" - ON, high reward/risk (TP/SL) ratio, 5 min timeframe on chart help with performance. Finally, I am looking forward to feedback from you. If you have some cool features for my script in your mind, do not hesitate to leave them in the comments. Good luck!
Strategia Pine Script®
di Cherepanov_V
13
EMA bands + leledc + bollinger bands trend following strategy v2The basics: In its simplest form, this strategy is a positional trend following strategy which enters long when price breaks out above "middle" EMA bands and closes or flips short when price breaks down below "middle" EMA bands. The top and bottom of the middle EMA bands are calculated from the EMA of candle highs and lows, respectively. The idea is that entering trades on breakouts of the high EMAs and low EMAs rather than the typical EMA based on candle closes gives a bit more confirmation of trend strength and minimizes getting chopped up. To further reduce getting chopped up, the strategy defaults to close on crossing the opposite EMA band (ie. long on break above high EMA middle band and close below low EMA middle band). This strategy works on all markets on all timeframes, but as a trend following strategy it works best on markets prone to trending such as crypto and tech stocks. On lower timeframes, longer EMAs tend to work best (I've found good results on EMA lengths even has high up to 1000), while 4H charts and above tend to work better with EMA lengths 21 and below. As an added filter to confirm the trend, a second EMA can be used. Inputting a slower EMA filter can ensure trades are entered in accordance with longer term trends, inputting a faster EMA filter can act as confirmation of breakout strength. Bar coloring can be enabled to quickly visually identify a trend's direction for confluence with other indicators or strategies. The goods: Waiting for the trend to flip before closing a trade (especially when a longer base EMA is used) often leaves money on the table. This script combines a number of ways to identify when a trend is exhausted for backtesting the best early exits. "Delayed bars inside middle bands" - When a number of candle's in a row open and close between the middle EMA bands, it could be a sign the trend is weak, or that the breakout was not the start of a new trend. Selecting this will close out positions after a number of bars has passed "Leledc bars" - Originally introduced by glaz, this is a price action indicator that highlights a candle after a number of bars in a row close the same direction and result in greatest high/low over a period. It often triggers when a strong trend has paused before further continuation, or it marks the end of a trend. To mitigate closing on false Leledc signals, this strategy has two options: 1. Introducing requirement for increased volume on the Leledc bars can help filter out Leledc signals that happen mid trend. 2. Closing after a number of Leledc bars appear after position opens. These two options work great in isolation but don't perform well together in my testing. "Bollinger Bands exhaustion bars" - These bars are highlighted when price closes back inside the Bollinger Bands and RSI is within specified overbought/sold zones. The idea is that a trend is overextended when price trades beyond the Bollinger Bands. When price closes back inside the bands it's likely due for mean reversion back to the base EMA in which this strategy will ideally re-enter a position. Since the added RSI requirements often make this indicator too strict to trigger a large enough sample size to backtest, I've found it best to use "non-standard" settings for both the bands and the RSI as seen in the default settings. "Buy/Sell zones" - Similar to the idea behind using Bollinger Bands exhaustion bars as a closing signal. Instead of calculating off of standard deviations, the Buy/Sell zones are calculated off multiples of the middle EMA bands. When trading beyond these zones and subsequently failing back inside, price may be due for mean reversion back to the base EMA. No RSI filter is used for Buy/Sell zones. If any early close conditions are selected, it's often worth enabling trade re-entry on "middle EMA band bounce". Instead of waiting for a candle to close back inside the middle EMA bands, this feature will re-enter position on only a wick back into the middle bands as will sometimes happen when the trend is strong. Any and all of the early close conditions can be combined. Experimenting with these, I've found can result in less net profit but higher win-rates and sharpe ratios as less time is spent in trades. The deadly: The trend is your friend. But wouldn't it be nice to catch the trends early? In ranging markets (or when using slower base EMAs in this strategy), waiting for confirmation of a breakout of the EMA bands at best will cause you to miss half the move, at worst will result in getting consistently chopped up. Enabling "counter-trend" trades on this strategy will allow the strategy to enter positions on the opposite side of the EMA bands on either a Leledc bar or Bollinger Bands exhaustion bar. There is a filter requiring either a high/low (for Leledc) or open (for BB bars) outside the selected inner or outer Buy/Sell zone. There are also a number of different close conditions for the counter-trend trades to experiment with and backtest. There are two ways I've found best to use counter-trend trades 1. Mean reverting scalp trades when a trend is clearly overextended. Selecting from the first 5 counter-trend closing conditions on the dropdown list will usually close the trades out quickly, with less profit but less risk. 2. Trying to catch trends early. Selecting any of the close conditions below the first 5 can cause the strategy to behave as if it's entering into a new trend (from the wrong side). This feature can be deadly effective in profiting from every move price makes, or deadly to the strategy's PnL if not set correctly. Since counter-trend trades open opposite the middle bands, a stop-loss is recommended to reduce risk. If stop-losses for counter-trend trades are disabled, the strategy will hold a position open often until liquidation in a trending market if th trade is offsides. Note that using a slower base EMA makes counter-trend stop-losses even more necessary as it can reduce the effectiveness of the Buy/Sell zone filter for opening the trades as price can spend a long time trending outside the zones. If faster EMAs (34 and below) are used with "Inner" Buy/Zone filter selected, the first few closing conditions will often trigger almost immediately closing the trade at a loss. The niche: I've added a feature to default into longs or shorts. Enabling these with other features (aside from the basic long/short on EMA middle band breakout) tends to break the strategy one way or another. Enabling default long works to simulate trying to acquire more of the asset rather than the base currency. Enabling default short can have positive results for those high FDV, high inflation coins that go down-only for months at a time. Otherwise, I use default short as a hedge for coins that I hold and stake spot. I gain the utility and APR of staking while reducing the risk of holding the underlying asset by maintaining a net neutral position *most* of the time. Disclaimer: This script is intended for experimenting and backtesting different strategies around EMA bands. Use this script for your live trading at your own risk. I am a rookie coder, as such there may be errors in the code that cause the strategy to behave not as intended. As far as I can tell it doesn't repaint, but I cannot guarantee that it does not. That being said if there's any question, improvements, or errors you've found, drop a comment below!
Strategia Pine Script®
di readysetliqd
5
Strategy LinReg ST@RLStrategy LinReg ST@RL Strategy LinReg ST@RL is a visual trend following indicator. It is compiled in PINE Script Version V5 language. This indicator/strategy, based on Linear Regression Calculation, is intended to help beginners (and also the more experienced ones) to trade in the right direction of the market trend and test strategy. It allows you to avoid the mistakes of always trading against the trend. Strategy based on an original idea of @KivancOzbilgic (SuperTrend) and DevLucem (@LucemAnb) (Lin Reg ++) A special credit goes to - KivancOzbilgic and @LucemAnb which inspired me a lot to improve this indicator/Strategy. This indicator can be configured to your liking,according to your needs or your tastes. The indicator/Strategy works in multi time frame. The settings (length, offset, deviation, smoothing) are identical for all time frames if “Conf Auto” is not checked. In this case the default settings (time frame=H1 settings) apply for all time frames. The choice of source setting is common for all time frames. If “Auto Conf” is checked, then the settings will be optimized for each selected time frame (1m-3m H2 H3 H1 H4 & Daily). Time frames, other than 1m-3m H2 H3 H1 H4 & Daily will be affected with the default settings corresponding to the H1 time frame and will therefore not be optimized! The default setting values of each time frame (1m-3m H2 H3 H1 H4 & Daily) can be configured differently and optimized by you. REVERSAL mode: Signal Buy=Sell and Signal Sell=Buy. This option may be better than the regular strategy. Default mode is Reversal option. Note that only for 1m (1 minute) Time frame, the option REVERSAL is opposite as default choice in configuration. (If reversal option is checked, then option for time frame 1m is not reversal!) Trend indications (potential sell or buy areas) are displayed as a background color (bullish: green or bearish: red), assume that the market is moving in one direction. You can tune the input, style and visibility settings to match your own preferences or habits. Label Info (Simple or Full) gives trend info for each Exit (or current trade) The choice of indicator colors is suitable for a graph with a "dark" theme, which you will probably need to modify for visual comfort, if you are using a "Light" mode or a custom mode. This script is an indicator that you can run on standard chart types. It also works on non-standard chart types but the results will be skewed and different. Non-standard charts are: • Heikin Ashi (HA) • Renko • Kagi • Point & Figure • Range As a reminder: No indicator is capable of providing accurate signals 100% of the time. Every now and then, even the best will fail, leaving you with a losing deal. Whichever indicator you base yourself on, remember to follow the basic rules of risk management and capital allocation. BINANCE:BTCUSDT ! Français ! Strategy LinReg ST@RL Stratégie LinReg ST@RL est un indicateur visuel de suivi de tendance. Il est compilé en langage PINE Script Version V5. Stratégie basée sur une idée originale de @KivancOzbilgic (SuperTrend) et DevLucem (@LucemAnb) (Lin Reg ++) Un crédit spécial va à - KivancOzbilgic et @LucemAnb qui m'ont beaucoup inspiré pour améliorer cet indicateur/stratégie. Cet indicateur/strategie, basé sur le calcul de régression linéaire, est destiné à aider les débutants (et aussi les plus expérimentés) à trader dans le bon sens de la tendance du marché et à tester la stratégie. Cela vous permet d'éviter les erreurs de toujours négocier à contre-courant. Cet indicateur peut être configuré à votre guise, selon vos besoins ou vos goûts. L'indicateur/Stratégie fonctionne sur plusieurs bases de temps. Les réglages (longueur, décalage, déviation, lissage) sont identiques pour toutes les bases de temps si « Conf Auto » n'est pas coché. Dans ce cas, les paramètres par défaut (intervalle de temps=paramètres H1) s'appliquent à toutes les bases de temps. Le choix du réglage de la source est commun à toutes les bases de temps. Si "Auto Conf" est coché, alors les paramètres seront optimisés pour chaque base de temps sélectionnée (1m-3m H2 H3 H1 H4 & Daily). Les bases de temps, autres que 1m-3m H2 H3 H1 H4 & Daily seront affectées par les paramètres par défaut correspondant à la base de temps H1 et ne seront donc pas optimisées ! Les valeurs de réglage par défaut de chaque période (1m-3m H2 H3 H1 H4 & Daily) peuvent être configurées différemment et optimisées par vous. Mode REVERSAL : Signal Achat=Vente et Signal Vente=Achat. Cette option peut être meilleure que la stratégie habituelle. Le mode par défaut est l'option REVERSAL. Notez que seulement pour la base de temps de 1m (1 minute), l'option REVERSAL est l’opposée du choix par défaut dans la configuration. (Si l'option REVERSAL est cochée, alors l'option pour la base de temps 1 m n'est pas REVERSAL !) Les indications de tendance (zones potentielles de vente ou d'achat) sont affichées en couleur de fond (haussier : vert ou baissier : rouge), supposons que le marché évolue dans une direction. Vous pouvez ajuster les paramètres d'entrée, de style et de visibilité en fonction de vos propres préférences ou habitudes. Les informations sur l'étiquette (simples ou complètes) donnent des informations sur de chaque clôture (ou position en cours) Le choix des couleurs des indicateurs est adapté à un graphique avec un thème "sombre", qu'il vous faudra probablement modifier pour le confort visuel, si vous utilisez un mode "Clair" ou un mode personnalisé. Ce script est un indicateur que vous pouvez exécuter sur des types de graphiques standard. Cela fonctionne également sur les types de graphiques non standard, mais les résultats seront faussés et différents. Les graphiques non standard sont : • Heikin Ashi (HA) • Renko • Kagi • Point & Figure • Range Pour rappel : Aucun indicateur n'est capable de fournir des signaux précis 100% du temps. De temps en temps, même les meilleurs échoueront, vous laissant avec une affaire perdante. Quel que soit l'indicateur sur lequel vous vous basez, rappelez-vous de suivre les règles de base de la gestion des risques et de l'allocation du capital.
Strategia Pine Script®
di RegisL76
13
AC- MY SCRIPT1My Ac- My Scrpt1 that the BUY and SELL signals (trend reversals) for many coins defined different tickers in Tradingview charts Terminology explanation: Confirmed Reversal: Oxford T reversal that happened in the last bar and cannot be repainted. Potential Reversal: Oxford T reversal that might happen in the current bar but can also not happen depending upon the timeframe closing price. Downtrend: Tickers that are currently in the sell zone Uptrend: Tickers that are currently in the buy zone List and show has also got a built in Oxford T indicator which users can confirm the reversals on graphs. Screener explores the 40 tickers in current graph's time frame and also in desired parameters of the OTT indicator. Also you can optimize the parameters manually with the built in STRATEGY version. Built in Moving Average type defaultly set as VAR but users can choose from 8 different Moving Average types like: SMA : Simple Moving Average EMA : Exponential Movin Average WMA : Weighted Moving Average TMA : Triangular Moving Average VAR : Variable Index Dynamic Moving Average aka VIDYA WWMA : Welles Wilder's Moving Average ZLEMA : Zero Lag Exponential Moving Average TSF : True Strength Force Tip: In sideways VAR would be a good choice You can use OxforfT default alarms and Buy Sell signals like: 1- BUY when Prices are above OxfordT SELL when Prices are below OxfordT 2- BUY when OxfordT support Line crosses over OoxfordT line. SELL when OxfordT support Line crosses under OxfordT line. 3- BUY when OxfordT line is Green and makes higher highs. SELL when OxfordT line is Red and makes lower lows. IMPORTANT: SCREENER ONLY EXPLORES AND SCREENS FOR THE 2nd SIGNAL TYPE: BUY when OxfordT support Line crosses over OxfordT line. SELL when OxfordT support Line crosses under OxfordT line.
Strategia Pine Script®
di CryptoxACking
BEAM DCA Strategy MonthlyThis strategy is based on BEAM bands for BTC. The space between the original BEAM bands is broken up into 10 bands representing levels of risk for investing fresh capital. The strategy will buy bitcoin when the price is in the bottom 5 bands, increasing the amount investmented as the price approaches the 1400 D SMA. The strategy will limit sell bitcoin when the price is in the top 5 bands, increasing the amount sold as the price approaches the upper BEAM band. Best used on Daily timeframe and on a chart with history of price data, i.e. INDEX:BTCUSD or BITSTAMP:BTCUSD To use the strategy: Set start date Set day of month to invest Set the maximum amount to be invested on any given month Toggle buy/sell orders Observe the backtest You can see how the strategy backtests via the information boxes in the bottom right. There is also functionality to adjust the bands for diminishing returns. Note, this should be used with great skepticism, as the adjustments were made by simple function fitting and not rigorous statistical processes. That about sums it up! As you can see, even with just a small amount of capital invested at regular intervals can lead to huge realised gains using this version of BEAM bands!
Strategia Pine Script®
di panpanXBT
1
Bollinger Bands Fibonacci Ratios StrategyHello, everyone! We have just released an innovative strategy for TradingView. It allows you to identify price pivot points and volatility. This strategy is: User-friendly Configurable Equipped with Bollinger Bands and smoothed ATR to measure volatility Features Thanks to the BB Fibo strategy, you can: Trade stocks and commodities. Identify price pivot points. Choose any band for trading Long or Short positions. Swap upper and lower bands applying Use Reverse Buy/Sell parameters. Note! The upper bands are for the Long position. The lower bands are for the Short positions. Parameters We have equipped our strategy with more than 14 additional parameters. So, you can configure the EA according to your needs! Inputs: Length Source: Open, High, Low, Close, HL2, HLC3, OHLC4 Offset Fibonacci Ratio 1 — a Fibonacci factor for the 1st upper and lower indicator lines calculating. Fibonacci Ratio 2 — a Fibonacci factor for the 2nd upper and lower indicator lines calculating. Fibonacci Ratio 3 — a Fibonacci factor for the 3d upper and lower indicator lines calculating. Use Reverse Buy — the strategy will use lower Bollinger bands instead of upper ones. Fibonacci Buy — band selection for opening Long positions conditions. Use Reverse Sell — the strategy will use upper Bollinger bands instead of lower ones. Fibonacci Sell — band selection for opening Short positions conditions. Style: Basis — baseline color and style settings. Upper 3 — the 3d upper line color and style. Upper 2 — the 2nd upper line color and style. Upper 1 — the 1st upper line color and style. Lower 1 — the 1st lower line color and style. Lower 2 — the 2nd lower line color and style. Lower 3 — the 3d upper line color and style. Background — the background color within the 3d upper and 3d lower indicator band. Precision — the number of decimals for BB Fibo values. Note! Try BB Fibo on your demo account first before going live.
Strategia Pine Script®
di The-4xdev-company
12
Optimized Keltner Channels SL/TP Strategy for BTCThis strategy is optimized for Bitcoin with the Keltner Channel Strategy, which is TradingView's built-in strategy. In the original Keltner Channel Strategy, it was difficult to predict the timing of entry because the Buy and Sell signals floated in the middle of the candle in real time. This strategy is convenient because if the bitcoin price hits the top or bottom of the Keltner Channel and closes the closing price, you can enter Buy or Sell at the next candle start price. In addition, this strategy provides Stop Loss and Take Profit functions to maximize profit. _________________________________ Recommended settings are below. - length: 9 - multiplier: 1 - source: close - (v) Use EMA - Bands Style: Average True Range - ATR Length: 19 - Stop Loss (%): 20 - Take Profit (%) : 20 _________________________________ - length: 9 - multiplier: 1 - source: close - (v) Use EMA - Bands Style: Average True Range - ATR Length: 18 - Stop Loss (%): 20 - Take Profit (%) : 5 _________________________________ ▶ Usefulness and Originality - Stop Loss and Take Profit functions are available - Convenient Buy and Sell entry compared to the original Keltner Channel Strategy - Optimized for BTCUSD market (maximizing profits) ___________________________________________ 이 전략은 TradingView의 Built-in 전략인 Keltner Channel Strategy를 비트코인에 맞게 최적화되었습니다. 기존의 Keltner Channel Strategy는 Buy, Sell 신호가 캔들 중간에 실시간으로 떠서 진입 시점을 예측하기 어려운 불편함이 있었지만 이 전략은 비트코인 가격이 Keltner Channel 상단 혹은 하단을 찍고 종가를 마감하면 그 다음 캔들 시작가에서 Buy 혹은 Sell 진입이 가능하여 편리합니다. 또한, 이 전략은 Keltner Channel을 만나서 캔들을 마감한 가격 (bprice, sprice)을 시각적으로 plot을 제공하여 타점 및 차트를 보기에 편리하며 손절가 및 목표가를 지정한 백테스팅이 가능합니다.
Strategia Pine Script®
di chanu_lev10k
10
[VJ] Viper VWAP IntradayHello Traders, this is a simple intraday strategy involving the ever reliable VWAP and a chop index to add twist to the traditional style . You can modify the values on the stock and see what are your best picks. Comment below if you found something with good returns Strategy: VWAP based strategy but uses an additional powerful indicator Chop index to help us stay out of false trades. Indicators used : VWAP identifies the true average price of a stock by factoring the volume of transactions at a specific price point and not based on the closing price. VWAP can add more value than your standard 10, 50, or 200 moving average indicators because VWAP reacts to price movements based on the volume during a given period. The Choppiness Index is designed to determine whether the market is choppy or trading sideways, or not choppy and trading within a trend in either direction. Using a scale from 1 - 100, the market is considered to be choppy as values near 100 (over 61.80) and trending when values are lower than 38.20) Buying/Selling typically happens at VWAP Breakouts which is then validated with extreme CI to ascertain the entries Aggressive trade stop can be employed by using the % for long and shorts in the strategy. Usage & Best setting : Choose a good volatile stock and a time frame - 10m. CI Index : 14 Trend Factor - anything below 38.2 is considered in trend, you can experiment from 50 There is stop loss and take profit that can be used to optimise your trade The template also includes daily square off based on your time.
Strategia Pine Script®
di vikris
Lawyers Trend Pro StrategyThis indicator basilcy has 1 line This indicator basicly using 2 different calculations average. And you can see this average as line on this script. This line has 2 functions 1. Buy and Sell Strategy -İf the line colored BLUE this means you can BUY (Long) -İf the line colored RED this means you can SELL (Short) As you can see the picture you can buy-sell and long-short with this line 2. Support and Resistance Function You can use the line as resistance and support. You can see when you can LONG and when you can SHORT with this strategy.
Strategia Pine Script®
di ErdemDemir
Ultimate Strategy TemplateHello Traders As most of you know, I'm a member of the PineCoders community and I sometimes take freelance pine coding jobs for TradingView users. Off the top of my head, users often want to: - convert an indicator into a strategy, so as to get the backtesting statistics from TradingView - add alerts to their indicator/strategy - develop a generic strategy template which can be plugged into (almost) any indicator My gift for the community today is my Ultimate Strategy Template Step 1: Create your connector Adapt your indicator with only 2 lines of code and then connect it to this strategy template. For doing so: 1) Find in your indicator where are the conditions printing the long/buy and short/sell signals. 2) Create an additional plot as below I'm giving an example with a Two moving averages cross. Please replicate the same methodology for your indicator wether it's a MACD, ZigZag, Pivots, higher-highs, lower-lows or whatever indicator with clear buy and sell conditions //@version=4 study(title='Moving Average Cross', shorttitle='Moving Average Cross', overlay=true, precision=6, max_labels_count=500, max_lines_count=500) type_ma1 = input(title="MA1 type", defval="SMA", options= ) length_ma1 = input(10, title = "   MA1 length", type=input.integer) type_ma2 = input(title="MA2 type", defval="SMA", options= ) length_ma2 = input(100, title = "   MA2 length", type=input.integer) // MA f_ma(smoothing, src, length) => iff(smoothing == "RMA", rma(src, length), iff(smoothing == "SMA", sma(src, length), iff(smoothing == "EMA", ema(src, length), src))) MA1 = f_ma(type_ma1, close, length_ma1) MA2 = f_ma(type_ma2, close, length_ma2) // buy and sell conditions buy = crossover(MA1, MA2) sell = crossunder(MA1, MA2) plot(MA1, color=color_ma1, title="Plot MA1", linewidth=3) plot(MA2, color=color_ma2, title="Plot MA2", linewidth=3) plotshape(buy, title='LONG SIGNAL', style=shape.circle, location=location.belowbar, color=color_ma1, size=size.normal) plotshape(sell, title='SHORT SIGNAL', style=shape.circle, location=location.abovebar, color=color_ma2, size=size.normal) /////////////////////////// SIGNAL FOR STRATEGY ///////////////////////// Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Basically, I identified my buy, sell conditions in the code and added this at the bottom of my indicator code Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Important Notes 🔥 The Strategy Template expects the value to be exactly 1 for the bullish signal , and -1 for the bearish signal Now you can connect your indicator to the Strategy Template using the method below or that one Step 2: Connect the connector 1) Add your updated indicator to a TradingView chart 2) Add the Strategy Template as well to the SAME chart 3) Open the Strategy Template settings and in the Data Source field select your 🔌Connector🔌 (which comes from your indicator) From then, you should start seeing the signals and plenty of other stuff on your chart 🔥 Note that whenever you'll update your indicator values, the strategy statistics and visual on your chart will update in real-time Settings - Color Candles : Color the candles based on the trade state (bullish, bearish, neutral) - Close positions at market at the end of each session : useful for everything but cryptocurrencies - Session time ranges : Take the signals from a starting time to an ending time - Close Direction : Choose to close only the longs, shorts, or both - Date Filter : Take the signals from a starting date to an ending date - Set the maximum losing streak length with an input - Set the maximum winning streak length with an input - Set the maximum consecutive days with a loss - Set the maximum drawdown (in % of strategy equity) - Set the maximum intraday loss in percentage - Limit the number of trades per day - Limit the number of trades per week - Stop-loss: None or Percentage or Trailing Stop Percentage or ATR - Take-Profit: None or Percentage or ATR - Risk-Reward based on ATR multiple for the Stop-Loss and Take-Profit This script is open-source so feel free to use it, and optimize it as you want Alerts Maybe you didn't know it but alerts are available on strategy scripts. I added them in this template - that's cool because: - if you don't know how to code, now you can connect your indicator and get alerts - you have now a cool template showing you how to create alerts for strategy scripts Source: www.tradingview.com I hope you'll like it, use it, optimize it and most importantly....make some optimizations to your indicators thanks to this Strategy template Special Thanks Special thanks to @JosKodify as I borrowed a few risk management snippets from his website: kodify.net Additional features I thought of plenty of extra filters that I'll add later on this week on this strategy template Best Dave
Strategia Pine Script®
di Daveatt
275
Follow the Trend - Trade PullbacksKindly follow the rules stated below for entry, exit and stop loss. Not every Buy / Sell signal will be profitable. Timeframe of the chart acts as current timeframe. You need to choose 2 more as middle and higher timeframes. This indicator is based on candlesticks, ATR and CCI indicators and the logic provides buy / sell signals at the pullbacks of the trend depicted by higher timeframe, that must be respected throughout. Enter the long / short trade respectively when the indicator gives buy / sell signal after price has gone below the green / above the red line for higher timeframe. Stop loss shall be low / high of recent swing. Exit when the price closes below / above the middle timeframe, to be used as trailing target. Use it for any instrument for any timeframe of your choice. For example, check the shared chart. It is a 1 min intraday, but the indicator can be used for short or long term positional trades as well. Enter long at 14102, with stop loss 14077. Trailing target is achieved at 14156 giving a Risk:Reward ratio of 1:2. Another Buy signal is observed around same level and uptrend continues till day end, again for a Risk:Reward ratio of approx. 1:2. Rules to follow for Long trades - Enter long position at Buy signal given after price has moved below green line of higher timeframe. Exit the position when price closes below orange / blue line of middle timeframe. Stop loss must be at low of recent swing, appearing just before the Buy signal. Rules to follow for Short trades - Enter short position at Sell signal given after price has moved above red line of higher timeframe. Exit the position when price closes above orange / blue line of middle timeframe. Stop loss must be at high of recent swing, appearing just before the Sell signal.
Strategia Pine Script®
di SushilKothawade
7