Inizia

Cerca negli script per "Candlestick"

Naked Bar Upward ReversalAMEX:SPY The Naked Bar Upward Reversal is a three bar candlestick pattern with an inside candle as a entry point. This pattern is bullish since it has a candle closing red from the previous candle; the most bearish pattern possible. The following inside candle is a reversal of its previous candle with an open above the previous candle's close. Look to buy the next open above the inside candle's close. This is a bullish reversal pattern and should be used in this context. Successful entries are found in corrections along an upward trend, or buying into a dip. Performance drops when the pattern appears at tops. To improve profitability, use a cluster of evidence to enhance the performance of this pattern. The intended time frame is within the daily and weekly.
Indicatore Pine Script®
di MrDevDevy
3
The Strat Screener - yungchoppsThis indicator scan up to 40 tickers of your choice for bullish and bearish Randy Jackson setups. Randy Jackson setups are 2u-2u-2d-2u for bullish cases and 2d-2d-2u-2d for bearish cases. If a ticker has a possible RJ setup, the ticker name will be display on the table depending if it is bullish or bearish. The only thing you need to do it change one of the default tickers to the ones you desire and the table will update if there are any RJ setups. The indicators search for RJ setups on the current timeframe that you are on. Randy Jackson setups are part of the 'Strat' candlestick analysist. More information about the Strat can be found on the internet and YouTube. This indicator reads the previous candles of every selected ticker and searched for a RJ setup. If one exist, it will update the table with the tickers name. I will add more setups in the future. This is a screener. This indicator really just makes it easier to scan many indicators at once. Its not hard to use... just place it on the chart and it will do the work for you. Hopefully mods find this enough of a description...
Indicatore Pine Script®
di trawda13
14
3 Candle EngulfingThree Line Strike Candlestick Pattern (3 candle Engulfing pattern) to help you detect sniper entry point mostly for (forex) You can use this as an indicator to detect an entry point for your trade. Please cross-check the Macro and Micro trend and don't go against the trend. Also use other indicators to confirm your entry. You can set the engulfing minimum pips value (Default is set to 10 pips) How it works: Yellow candle with an up green triangle means a long entry White candle with a down green triangle means a short entry
Indicatore Pine Script®
di moamenmostafa
2
Body/Wick to Range Osc.This script is meant to be a form of pure candlestick analysis. Terminology in the description used below is as follows: - numcands = Number of candles specified by the user to be used for sampling in each moving average. This script plots moving average (SMA/EMA specified by the user ) of the percentage of the high-low range that the previous {numcands} candles the upper wicks, lower wicks, and the body take up. The user may specify if the absolute value of the body percentage is to be used (true by default). To account for this, a horizontal line is also plotted at 0 to show when the body percentage moves above or below 0. The values that all of these moving averages plotted will oscillate between 0 and 1 (-1 and 1 for the body percentage if the absolute value of candles is not used). Other notes: The user may select the colors used (colorblind support, as the defaults are red and green). Cross overs and cross unders are accounted for in alertconditions (as is if the body % moves above and below 0% if absolute values are not used). An interpretation of the use of this script may be: If the upper wicks begin to take up a larger portion of the high-low range, it may signal downward selling pressure (and vise-versa for lower wicks). However, this may be open to interpretation based upon the specified {numcands} used.
Indicatore Pine Script®
di SolCollector
2
Relative Falling three Methods IndicatorAbstract This script measure the related speed between rising and falling. This script can replace binary Falling Three Methods detector and, report continuous value and estimate potential trend direction. My suggestion of using this script is combining it with trading emotion. Introduction Falling Three Methods (F3M) is a candlestick pattern. Many trading courses say traders can regard it as predicting falling will continue. However, it is not easy to see perfect Falling Three Methods pattern from charts. Therefore, we need an alternative method to measure it. We can use the observation that falling is faster than rising during those time. When falling is faster than rising, some long ( buy , call , higher , upper ) position owners may worry the price will fall very much suddenly. When rising is faster than falling, some traders may worry they may miss buy opportunities. Computing Related Falling Three Methods Indicator (1) The value of rising and falling In this script, open price is replaced with previous close price. If the previous price is equal to the close price, than both rising and falling are equal to high-low. If the previous price is lower than the close price, than the falling value becomes smaller, high-close+previous-low. If the previous price is higher than the close price, than the rising value becomes smaller, high-previous+close-low. (2) Area of value (aov) Area of value is equal to highest-lowest. The previous close price is included. (3) Compute weight and filter noise We need a threshold for the noise filter. The default setting is aov/length, where length means how many days are counted. When a rising or falling value <= threshold, it is not counted. When a rising or falling value > threshold, the counted value = original value - threshold and its weight = min ( counted value , threshold ) (4) compute speed Rising speed = sum ( counted rising value ) / sum ( rising weight ) Falling speed = sum ( counted falling value ) / sum ( falling weight ) (5) Final result Final result = Rising speed / ( Rising speed + Falling speed ) * 100 - 50 I move the middle level to 0 because 0 axis is always visible unless you cannot see negative values or you cannot see positive values. Parameters Length : how many days are counted. The default value is 16 just because 16=4*4, using binary characteristic. Multi : the multiplier of noise threshold. Threshold applied = default threshold * multi src : current not used Conclusion Related Falling Three Methods Indicator can measure the related speed between rising and falling. I hope this indicator can help us to evaluate the possibility of trend continue or reversal and potential breakout direction. After all, we care how trading emotion control the price movement and therefore we can take advantage to it. Reference How to trade with Falling Three Methods pattern How to trade with Related Strength Indicator
Indicatore Pine Script®
di clocks156t174
DePriExchange weighted price for cryptocurrencies DECENTRALIZED PRICE CHART FOR DECENTRALIZED WORLD See non-manipulated , globally price action that comes from whole liquidity! The main idea behind this script is that... The value of each trading pair finally determined globally and the price displayed in exchanges is its own and not global! differences between exchanges, reduced to near zero gradually by market makers and arbitrages, so.. Every min tick price changes Must be backed by liquidity to be part of the global fluctuations more liquidity gives it more credibility more credibility give it more weight ..Against opposing movements. This script can collect price of crypto pairs from 12 exchanges that listed on TV and have effective volume. In the first step, summarizes the volume of all exchanges and creates the total volume In the next step, divide each exchange volume to total volume to obtain relative weight of each exchange. In the final step, multiply each exchange price to weight of itself and summarizes these numbers .. now, we have Exchange weighted price! The results on high liquidity pairs like BTCUSDT, ETHUSDT, is not much differ then simple chart but when you apply it on lower liquidity, lower time frames of altcoins, you realize its benefits and usefulness. Altcoins chart in composite and simple mode is very differ, I hope you enjoy from TRUE CHART. With this, also you can.. Filter and smooth candlestick chart with SMA or EMA Plot a line chart of pair at your desired frame separate from the main chart for monitor important price levels Get realtime report of whole volume of pair on included exchanges Get realtime report of each exchange weight and share Note.1: some of pairs queted on more than one like BTCUSD, BTCUSDT, BTCUSDC and etc. In this pairs we choose the one that usually has more volume on that exchange. Note.2: At this time, supported queted currencies are BTC, ETH, USD, USDT, BUSD, USDC, USDK. Note.3: This script is relatively heavy! This is not cuz of bad coding. Each bar compution contains at least one plot and some of security calls, so 10 to 15 seconds is normal load time. Note.4: You can combine this with your price action base scripts and use balanced OHLCV. The necessary explanations about this are available in the code. Note.5: You must only include exchanges that support your ticker, Otherwise you will receive an error. I hope it comes useful to you.
Indicatore Pine Script®
di Algorca
3
Retrospective Candlestick ChartWhen i was in Japan with some traders colleagues we talked about traditional charting tools from this country and how they changed the way we look at our charts today. Then suddenly one of the japanese traders i have met earlier said "Why not making another charting tool ? Smoother than Heikin-Ashi and including all the information a trader may need but easier to interpret". So i had the idea of averaging the input and the output of the respective close / open / high and low price using a recursive exponential window functions, each values will be closer to their true value if they are volatile, if they are not then those values will look smoother, the length input represents the reactivity of the candles, high values represents smoother results but less reactive.The goal of those candles is to make all the information easier to interpret by a trader. 500 input length , the price look smoother, supports and resistances are easier to make. The interpretation of highs and lows are important, the Retrospective Candlestick Chart save you time by showing only huge movements.
Indicatore Pine Script®
di alexgrover
8
Price Action Doji Harami v0.2 by JustUncleLThis is an updated and final version of this indicator. This version distinguishes between the true Harami and the other Doji candlestick patterns as used with the Heikin Ashi candle charts. These candle patterns indicate a potential trend reversal or pullback. The patterns identified are: - Bearish Harami (Red Highlight above Bar): One to three (default 3) large body Bull (green) candles followed by a small (red) or no body candle (less than 0.5pip) with wicks top and bottom that are at least 60% of candle. - Bullish Harami (Green Highlight below Bar): One to three (default 3) large body Bear (red) candles followed by a small (green) or no body candle (less than 0.5pip) with wicks top and bottom that are at least 60% of candle. - Bearish Doji (Fuchsia Highlight above Bar): One to three (default 3) large body Bull (green) candles followed by a small (green) with wicks top and bottom that are at least 60% of candle. - Bullish Doji (Aqua Highlight below Bar): One to three (default 3) large body Bear (red) candles followed by a small (red) with wicks top and bottom that are at least 60% of candle. You can optionally specify how large the candles prior to Harami/Doji are in pips, default is 0 pip. If you set this to zero then it will have no candle size consideration. You can also specify how many look back candles (1-3) are used in Harami/Doji calculations (default 3). Included option to perform Calculations purely on Heikin Ashi candles, this helps when you want to see the HA Doji/Harami bars with the normal candle stick chart. Also can optionally set an alert condition for when Harami/Doji found, this also displays a circle on the bottom of the screen when alert is triggered.
Indicatore Pine Script®
di JustUncleL
28
Adaptive Ergodic Candlestick Oscillator [LazyBear]This updates Blau's excellent Candlestick oscillator to be adaptive by using the length of a scaled stochastic indicator and an exponent (for calculating the smoothing coefficient) to obtain the moving average. Check out the options page for configurable variables. More info on Ergodic Oscillator: Book: "Momentum, Direction and Divergence" by William Blau List of my public indicators: bit.ly List of my app-store indicators: blog.tradingview.com
Indicatore Pine Script®
di LazyBear
12
Binary Option Arrows (example) [TheMightyChicken]An example of binary option arrows for candlestick patterns bearish and bullish harami. With results as colored background and an option to choose your expiration (one candle by default). It's just an example for those who has their own strategy and wants to make nice arrows in their chart. All you need to do is rewrite piece of script in lines 9:13 - feel free to ask me for any help, but I believe it's all clear. Disclaimer: It's just an example how to script arrows for binary option and I am not responsible for any loss of money by using this particular strategy. I wish happy and successful trading! ;)
Indicatore Pine Script®
di whis_gg
48
Indicator: Intrady Momentum IndexThe Intraday Momentum Index (IMI), developed by Tushar Chande, is a cross-breed between RSI and candlestick analysis. IMI determines the candle type that dominated the recent price action, using that to pinpoint the extremes in intraday momentum. As the market tries to bottom after a sell off, there are gradually more candles with green bodies, even though prices remain in a narrow range. IMI can be used to detect this shift, because its values will increase towards 70. Similarly, as the market begins to top, there will be more red candles, causing IMI to decline towards 20. When the market is in trading range, IMI values will be in the neutral range of 40 to 60. Usually intraday momentum leads interday momentum. QStick can show interday momentum, it complements IMI. You will find it in my published indicators. I have added volatility bands based OB/OS, in addition to static OB/OS levels. You can also turn on IMI Ehlers smoothing. BTW, all parameters are configurable, so do check out the options page. List of my other indicators: - - Google doc: docs.google.com
Indicatore Pine Script®
di LazyBear
14
FxInside你这段代码整体逻辑是正确的，但如果**实际运行后看不到空头信号（`short_signal`）**，那大概率是因为条件太苛刻，在你当前查看的图表、时间周期和币种上**并没有符合这些严格空头条件的K线**。 --- ### ✅ 逐项检查你的 `short_signal` 条件： ```pinescript short_signal = do_tick/st >= 2 and st / (high - low ) >= 0.05 and up_tick/st <= 0.75 and close < low ``` #### 解释： 1. `do_tick / st >= 2`：前一根K线下影线明显大于实体（**下影线 >= 实体的2倍**）✅ 2. `st / (high - low ) >= 0.05`：实体不能太小（至少占K线5%）✅ 3. `up_tick / st <= 0.75`：上影线不能太大 ✅ 4. `close < low `：当前K线收盘价要**跌破前一根K线最低价**（这可能比较苛刻❗） --- ### 🔍 为什么很少或没有出现空头信号？ 通常是因为 **`close < low `** 是比较少见的情况（意味着当前K线**收盘直接创新低**），在大部分正常震荡或下跌过程中，K线更多是影线破位而不是**实体收盘破位**。 --- ### ✅ 如何验证问题？ 你可以临时在图表中添加一个调试输出，例如： ```pinescript label.new(bar_index, high, text="✓", color=color.red) if short_signal ``` 或者添加调试 `plot`： ```pinescript plot(close < low ? 1 : na, title="收盘破前低", color=color.red) ``` 你会发现这个条件非常少成立。 --- ### ✅ 两个可选改进方式： #### ✅ 方式1：放宽空头条件的“收盘破低”为“最低价破低” ```pinescript short_signal = do_tick/st >= 2 and st / (high - low ) >= 0.05 and up_tick/st <= 0.75 and low < low ``` 这样只要**当前K线最低价跌破前低**就算空头信号，触发率大幅提升。 --- #### ✅ 方式2：同时显示条件组件，方便你调试 ```pinescript plotshape(do_tick/st >= 2, title="下影线够长", location=location.top, color=color.blue, style=shape.circle) plotshape(st / (high - low ) >= 0.05, title="实体不小", location=location.top, color=color.yellow, style=shape.circle) plotshape(up_tick/st <= 0.75, title="上影线不大", location=location.top, color=color.orange, style=shape.circle) plotshape(close < low , title="收盘破低", location=location.top, color=color.red, style=shape.triangledown) ``` 这样可以清晰地看到哪一个条件没有被满足。 --- 如果你愿意，我也可以根据你的交易风格（比如追空激进 or 保守），重新优化空头条件。是否要我为你设计一个更高触发率的版本？
Indicatore Pine Script®
di gbupkegl26