Inizia

Cerca negli script per "binary"

Relative Body Indicator by VtsRBI: The EMA of the relative body (RB) of Japanese candles is evaluated. The RB of a candle (my definition) is simply the ratio of the body with respect to its full length and taken positive for bull candles and negative for bear candles: e.g. a bull "marubozo" has RB=1 a bear "marubozo" has RB=-1; a "doji" has RB=0. This simple indicator grasps the essence of the market by filtering out a great deal of noise. A flag can be selected to calculate its very basic binary version, where a bull candle counts as a one and a bear candle counts as a minus one. Enter (or exit) the market when the signal line crosses the base line. When the market is choppy we have a kind of alternating bear and bull candles so that RBI is FLAT and usually close to zero. Therefore avoid entering the market when RBI is FLAT and INSIDE the Exclusion level. The exclusion level is to be set by hand: go back in history and check when market was choppy; a good way to set it is to frame the oscillations of RBI whe price was choppy. RBI is more effective when an EMA of price is used as filtering. I found EMA(13) to be a decent filter: go long when base crosses signal upwards AND closing price is above EMA(13); same concept for going short. As any other indicator, use it with responsibility: THERE CAN'T BE A SINGLE MAGIC INDICATOR winning all trades. Above all, have fun. Vitelot/Yanez/Vts March 31, 2019 Note: I'm not aware of any indicator like this. My apologies to whoever had this idea before me.
Indicatore Pine Script®
di vitelot
1
Surface Roughness EstimatorIntroduction Roughness of a signal is often non desired since smooth signals are easier to analyse, its logical to say that anything interacting with rough price is subject to decrease in accuracy/efficiency and can induce non desired effects such as whipsaws. Being able to measure it can give useful information and potentially avoid errors in an analysis. It is said that roughness appear when a signal have high-frequencies (short wavelengths) components with considerable amplitudes, so its not wrong to say that "estimating roughness" can be derived into "estimating complexity". Measuring Roughness There are a lot of way to estimate roughness in a signal, the most well know method being the estimation of fractal dimensions. Here i will use a first order autocorrelation function. Auto-correlation is defined by the linear relationship between a signal and a delayed version of itself, for exemple if the price goes on the same direction than the price i bars back then the auto-correlation will increase, else decrease. So what this have to do with roughness ? Well when the auto-correlation decrease it means that the dominant frequency is high, and therefore that the signal is rough. Interpretation Of The Indicator When the indicator is high it means that price is rough, when its low it indicate that price is smooth. Originally its the inverse way but i found that it was more convenient to do it this way. We can interpret low values of the indicator as a trending market but its not totally true, for example high values dont always indicate that the market is ranging. Here the comparison with the indicator applied to price (orange) and a moving average (purple) The average measurement applied to a moving average is way lower than the one using the price, this is because a moving average is smoother than price. Its also interesting to see that some trend strength estimator like efficiency ratio can treat huge volatility signals as trend as shown below. Here the efficiency ratio treat this volatile movement as a trending market, our indicator instead indicate that this movement is rough, such indication can avoid situation where price is followed by another huge volatile movement in the opposite direction. Its important to make the distinction between volatility and trend strength, the trend is defined by low frequencies components of a signal, therefore measuring trend strength can be resumed as measuring the amplitude of such frequencies, but roughness estimation can do a great job as well. Conclusion I have showed how to estimate roughness in price and compared how our indicator behaved in comparison with a classic trend strength measurement tool. Filters or any other indicator can be way more efficient if they know how to filter according to a situation, more commonly smoothing more when price is rough and smoothing less when price is smooth. Its good to have a wider view of how market is behaving and not sticking with the binary view of "Trending" and "Ranging" . I hope you find a use to this script :) Best Regards
Indicatore Pine Script®
di alexgrover
3
Graph Reader Pro 5.0Graph Reader Pro 5.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening in the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the right bar closed lower, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC59 support line and nine consecutive series of down counts will define the highest price as CC59 resistance line. The counted numbers, support and resistance lines are automatically printed on the graph if enabled. Draw the high and low levels of the previous day, if enabled. The Previous Day's High and Low are often used as reversal levels in the few future days. Draw the price range of each day based on Average Daily Range (ADR) value. These lines only show in graphs with less than daily time frames. Draw the price range of each week based on Average Weekly Range (AWR) value. These lines only show in daily graphs. Draw simple moving average line SMA3 (yellow), SMA13 (green), SMA50 (pink), and SMA200 (white). Draw Bollinger bands (50,2) upper and lower lines (pink) with SMA50 as a center line (pink). Locate the price gaps in the graphs of stocks and indexes. The opened gaps are often closed later on. Hence, they are milestones for the price to come back and close them up. Paint the background areas with active Forex trading of Asian, London, and New York sessions, if enabled. Locate an engulfing bar that cover the previous bar with a body portion less than 50% of its range. Locate an anchor bar that has the range (High - Low) larger than those 14 bars earlier. Print "RSI>70" and "RSI<70" for RSI(14) that crossed above 70 % and below 70 %. Print "RSI<30" and "RSI>30" for RSI(14) that crossed below 30 % and above 30 %. Print "MACD>Sig" and "MACD0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. Print "Max" and "Min" for local maximum and local minimum bars. Print "MA3>13>50" and "MA3<13<50" for ordering of SMA(3,13,50). Create alarm conditions for the following events that could be set to notify the investor on screen, to an email and to a smart phone: "Close above MA3" "Close under MA3" "Close above MA13" "Close under MA13" "Close above MA50" "Close under MA50" "Close above MA200" "Close under MA200" "MACD up" "MACD down" "MACD>Sig" "MACD0" "MACD<0" "MA3 up" "MA3 down" "MA13 up" "MA13 down" "MA50 up" "MA50 down" "CC59 = -1" "CC59 = +1" "CC59 = -9" "CC59 = +9" "CC59 = -9F" "CC59 = +9F" "MA3 < MA13" "MA3 > MA13" "MA13 < MA50" "MA13 > MA50" "(MA3 < MA13) > MA50" "MA50 > (MA3 > MA13)" "MA3 > MA13 > MA50" "MA3 < MA13 < MA50" "RSI<30" "RSI>30" "RSI<50" "RSI>50" "RSI<70" "RSI>70" "Hit yesterday's high" "Hit yesterday's low" "Hit day open + ADR/2" "Hit day open" "Hit day open - ADR/2" "Hit CC59 resistance" "Hit CC59 support" ================================================================================================= The source code of Graph Reader Pro 5.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. For more informaton please contact the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Remove older version Graph Reader Pro by clicking on the "X" botton behind the indicator line at the top left corner of the chart window. *Open a new chart at and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Graph Reader Pro 5.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scales" tab, select Decimal Places = 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose Time Zone = Your local time. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Graph Reader Pro". *Click OK. *Right click anywhere on the graph, choose "Color Theme => Dark". For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI and MACD indicators with same parameters as those setup in Graph Reader Pro to your graph. DrGraph regularly publishes his educational ideas on using features provided in Graph Reader Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
[SSABU] ALTCOIN-KRW-PRICE-TREND✅ ALTCOIN-KRW-PRICE-TREND Indicator. This indicator is a supplementary indicator that notifies you of the original price of Altcoin in BTC Market in real time without checking the original chart. The BTC market saturation value that the user sees is multiplied by the average value of the Brisim and the covit, It tells you the original price of altcoin. Look at the Satco chart on Altcorne in Binary's BTC market and do not check the chart of the coin price of the coin You can also find out by checking only the secondary indicators. ✅ ALTCOIN-KRW-PRICE-TREND 지표 입니다. 본 지표는 BTC마켓에 있는 알트코인의 원화가격을 원화차트를 확인하지 않아도 실시간으로 알려주는 보조지표 입니다. 사용자가 보고있는 BTC마켓의 사토시값에 트레이딩뷰에서 지원하는 원화 차트인 빗썸과 코빗의 원화 평균값을 곱하여 알트코인의 원화가격을 저절로 알려줍니다. 바이낸스의 BTC마켓에 있는 알트코인의 사토시 차트를 보고 해당코인의 원화가격이 얼마인지 따로 차트를 확인하지 않고 보조지표만 확인하여도 알 수 있습니다. ✅ 매매에 도움되는 다른 보조지표 Basel major 2.21
Indicatore Pine Script®
di ssabu
136
PRO FrameworkINVITE ONLY SCRIPT: FEATURES: As its name suggests, Framework is here to offer a non-subjective frame of reference to traders. Effectively filtering 90% of prices offering poor risk management opportunities. More importantly this is a multi-timeframe tool that will scan across three time frames all at once, offering a final synthesized rendering. Our goal was to provide a professional grade dynamic price analysis without bloating the chart with numerous plots. Nevertheless they are complex tools requiring extensive learning. To support students in their journey, there is a wide open online community of users in our Discord channel, providing peer-to-peer assistance to progress with the strategy as well as tutored courses. OUTPUTS: To share a brief description of the indicators functioning, we will scroll through the major set of outputs that are presented to the user. Please note that the indicator is meant to assist from Junior to Senior expertise, to achieve this we have set different base templates right into the indicators. To keep this description simple, we will present the outputs you’ll see with the beginner setup: Context Channel: composed of two “ribbons” one above the price and one below. It represents the dynamic zones of supply and demand, where prices are likely to find support and resistance for the given chart timeframe. They are representing complex algorithmic versions of channels evolving over time, while adapting to both ranges and trend conditions. Allowing to visualize the current price channel which the price is trading within, but also review the history of past dynamics. Ultimately, studying both the recent and past context behavior tells us everything we need about the price structure. Average Price: Corresponding to a simple 20 period moving average synchronized with the context channel reference timeframe. Looking at the channel’s position relative to this average will help us define the “context” of the market, thereby filtering the patterns we will be able to apply to this chart (range, trend, volatility). Breakout Targets: represented by small plots on the chart (cross, square, diamond) they inform the trader that the market is attempting to move in a particular direction. Given the predetermined context in which that pattern triggers, this will help us in managing the risk. Price Confirmations: corresponding to the small triangle plots on the chart, they are automatically calculated to determine areas where other traders might have taken actions. These triangles aren’t a trading signal per say, they will be the trigger for our trades with the PRO Strategy, but only when patterns are active (meaning we are in the right context, and have enough risk limitation elements to justify entry). Auto-Fibonacci: As most of our patterns include certain retracement rules, we decided to include a built-in fibonacci plotting tool. The outputs will automatically update with new prices, allowing users to use it as a trigger for the TradingView alerts system. Automated Context Detection: the actual real Intellectual property and added value of PRO Indicators resides in our semi-automated system, based on the complex algorithmic detection of potentially favorable contexts to apply the strategy on. This also means that you can set alerts, and let the cloud monitor the market and be notified when the conditions are deemed viable. As you progress to more Senior contexts and adjust the indicators’ template setup, more complex alerts will be detected. GENERAL STRATEGY: Overall, the PRO Strategy combines two “core” indicators, Framework and Momentum. Framework is plotted on the main chart section as an overlay, it is definitely the most important as it guides the user through the hard process of filtering prices and timeframes that are suitable for technical analysis. On the other hand, PRO Momentum is on a separate oscillator tab under the chart section, it will study the momentum and cyclical structure, also offering automated pattern detection. Ultimately, our strategy is based on collecting and processing non-subjective rules, emanating from the indicators outputs. Essentially, this means that the indicator actually takes care of producing all the necessary binary outputs, leaving you with the remaining task of combining them correctly following the strategy’s patterns. RISK LIMITATION: Even if we provide semi-automated detection of viable contexts, there is no “one-click” or "easy-win” solution, the user still needs to carefully review the elements. When applicable pattern rules are confirmed, the user will gather risk-limitation information (breakout targets, price confirmations, momentum and cyclical coordination) and decide whether or not to trade according to its own risk profile. If so, the position sizing, stop-loss positioning, risk management and profit targets will all be defined according to the same indicator’s outputs. This effectively suppresses most behavioral and personal biases the trader could introduce, creating a stable and statistical risk management structure aiming for a durable profitability.
Indicatore Pine Script®
di PRO_Indicators
60
Graph Reader Pro 4.0Graph Reader Pro 4.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening in the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the right bar closed lower, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC59 support line and nine consecutive series of down counts will define the highest price as CC59 resistance line. The counted numbers, support and resistance lines are automatically printed on the graph if enabled. Draw the high and low levels of the previous day, if enabled. The Previous Day's High and Low are often used as reversal levels in the few future days. Draw the price range of each day based on Average Daily Range (ADR) value. These lines only show in graphs with less than daily time frames. Draw the price range of each week based on Average Weekly Range (AWR) value. These lines only show in daily graphs. Draw simple moving average line SMA3, with ability to change the line color based on increasing or decreasing MACD value. Draw simple moving average line SMA50, with ability to change the line color based on its own increasing or decreasing value. Locate the price gaps in the graphs of stocks and indexes. The opened gaps are often closed later on. Hence, they are milestones for the price to come back and close them up. Draw a ribbon of simple moving average lines consisting of SMA3, SMA4, SMA5, SMA6 and SMA7, if enabled. Twisting of the SMA ribbon gives a visual signal for price reversal. Draw a set of other simple moving average lines such as SMA13, SMA200, SMA800 (if enabled). Paint the background areas with active Forex trading of Asian, London, and New York sessions, if enabled. Locate an engulfing bar that cover the previous bar with a body portion less than 50% of its range. Locate an anchor bar that has the range (High - Low) larger than those 14 bars earlier. Print "RSI>70" and "RSI<70" for RSI(14) that crossed above 70 % and below 70 %. Print "RSI<30" and "RSI>30" for RSI(14) that crossed below 30 % and above 30 %. Print "RSI<50" and "RSI>50" for RSI(14) that crossed below 50 % and above 50 %. Print "MACD>Sig" and "MACD0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. Print "Max" and "Min" for local maximum and local minimum bars. Print "SMA5>13" and "SMA5<13" for SMA(5) crossed above and below SMA(13). Print "Highest" and "Lowest" at the highest and lowest prices in a group of configurable number of bars earlier. ================================================================================================= The source code of Graph Reader Pro 4.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. For more informaton please contact the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Remove older version Graph Reader Pro by clicking on the "X" botton behind the indicator line at the top left corner of the chart window. *Open a new chart at and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Graph Reader Pro 4.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scales" tab, select Decimal Places = 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose Time Zone = Your local time. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Graph Reader Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI and MACD indicators with same parameters as those setup in Graph Reader Pro to your graph. DrGraph regularly publishes his educational ideas on using features provided in Graph Reader Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
Graph Reader Pro 3.0Graph Reader Pro 3.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening in the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the right bar closed lower, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC59 support line and nine consecutive series of down counts will define the highest price as CC59 resistance line. The counted numbers, support and resistance lines are automatically printed on the graph if enabled. Draw the high and low levels of the previous day, if enabled. The Previous Day's High and Low are often used as reversal levels in the few future days. Draw the price range of each day based on Average Daily Range (ADR) value. Draw the price range of each week based on Average Weekly Range (AWR) value. Paint the background areas with active Forex trading of Asian, London, and New York sessions, if enabled. Draw simple moving average lines such as SMA3, with ability to change the line color based on increasing or decreasing MACD value. Draw simple moving average lines such as SMA50 with ability to change the line color based on increasing or decreasing prices. A set of other simple moving average lines such as SMA13, SMA200, SMA800 can be drawn if enabled. Draw a ribbon of simple moving average lines consisting of SMA3, SMA4, SMA5, SMA6 and SMA7, if enabled. Twisting of the SMA ribbon gives a visual signal for price reversal. Locate the price gaps in the graphs of stocks and indexes. The opened gaps are often closed later on. Hence, they are milestones for the price to come back and close them up. Locate the pin bars having the body portion less than a specific percent of the range. The pin bars show hestitation for the price to continue the current trend. When a pin bar is covered or engulfed by the next larger bar, a trend reversal offen follows. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "C>SMA3" and "C13" and "SMA5<13" for SMA(5) crossed above and below SMA(13). - Print "Max" and "Min" for local maximum and local minimum bars. - Print "RSI>70" and "RSI<70" for RSI(14) that crossed above 70 % and below 70 %. - Print "RSI<30" and "RSI>30" for RSI(14) that crossed below 30 % and above 30 %. - Print "RSI>50" and "RSI<50" for RSI(14) that crossed above 50 % and below 50 %. - Print "RSI<50" and "RSI>50" for RSI(14) that crossed below 50 % and above 50 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. ================================================================================================= The source code of Graph Reader Pro 3.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. For more informaton please contact the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ For normal install, follow these steps: *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart at and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Graph Reader Pro 3.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scales" tab, select Decimal Places = 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose Time Zone = Your local time. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Graph Reader Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI and MACD indicators with same parameters as those setup in Graph Reader Pro to your graph. DrGraph regularly publishes his educational ideas on using features provided in Graph Reader Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
2
Graph Reader Pro 2.0Graph Reader Pro 2.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening in the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the right bar closed lower, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC59 support line and nine consecutive series of down counts will define the highest price as CC59 resistance line. The counted numbers, support and resistance lines are automatically printed on the graph if enabled. Draw the high and low levels of the previous day, if enabled. The Previous Day's High and Low are often used as reversal levels in the few future days. Draw the price range of each day based on Average Daily Range (ADR) value. Paint the background areas with active Forex trading of Asian, London, and New York sessions, if enabled. Draw simple moving average lines such as SMA5, SMA50 with ability to change the line color based on increasing or decreasing prices. A set of other simple moving average lines such as SMA13, SMA200, SMA800 can be drawn if enabled. Draw a ribbon of simple moving average lines consisting of SMA3, SMA4, SMA6 and SMA7, if enabled. Twisting of the SMA ribbon gives a visual signal for price reversal. Locate the price gaps in the graphs of stocks and indexes. The opened gaps are often closed later on. Hence, they are milestones for the price to come back and close them up. Locate the pin bars having the body portion less than a specific percent of the range. The pin bars show hestitation for the price to continue the current trend. When a pin bar is covered or engulfed by the next larger bar, a trend reversal offen follows. Draw Bollinger bands (50,2), if enabled. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "C>SMA5" and "C13" and "SMA5<13" for SMA(5) crossed above and below SMA(13). - Print "Max" and "Min" for local maximum and local minimum bars. - Print "RSI>70" and "RSI<70" for RSI(14) that crossed above 70 % and below 70 %. - Print "RSI<30" and "RSI>30" for RSI(14) that crossed below 30 % and above 30 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. ================================================================================================= The source code of Graph Reader Pro 2.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. For more informaton please contact the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Graph Reader Pro 2.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scale" tab, choose decimal places of 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose your local time zone. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Graph Reader Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI and MACD indicators with same parameters as those setup in Graph Reader Pro to your graph. DrGraph regularly publishes his educational ideas on using features provided in Graph Reader Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
2
HowManyBitsCostFrom-Binance(1/4) It is an index that checks how many copies have been made for a particular binary event from a certain date. Check the "ConsiderCirculationSupply" item to check the purchase price against the market capitalization. This is an example of ARN revenue forecasts through this indicator. In the normal bit coin cycle, specify the date based on the finish high. It is specified by Eliot wave standard 5 wave (high point) So, when you fall down, you can get the same amount. A total of four indicators must be combined to see all the Bainance stocks. A quarter of a million are open for weekly testing. 특정 날짜로부터 바이낸스 종목에 대해 얼마나 매수 일어났는지 체크하는 지표입니다. "ConsiderCirculationSupply"항목을 체크시 시가총액 대비 매수량을 체크합니다. 이 지표를 통해 ARN수익 예측한 예시입니다. 통상 비트코인 사이클에서 마무리 고점을 기준으로 날짜를 지정하면됩니다. 엘리엇파동 기준 5파에서 지정합니다.(고점) 그럼 하락떄 동일하게 빠지고 바닥권체크후 그때부터 매집된 양을 파악 가능합니다. 총4가지 지표가 합쳐져야 모든 바이낸스 종목을 볼 수 있습니다. 1/4만 일주일간 테스팅용으로 공개합니다.
Indicatore Pine Script®
di AUTOBOTETHER
5
Graph Reader Pro 1.0Graph Reader Pro 1.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening in the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the right bar closed lower, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC59 support line and nine consecutive series of down counts will define the highest price as CC59 resistance line. The counted numbers, support and resistance lines are automatically printed on the graph if enabled. Draw simple moving average lines such as SMA5, SMA50 with ability to change the line color based on increasing or decreasing prices. A set of other simple moving average lines such as SMA13, SMA200, SMA800 can be drawn if enabled. Draw a ribbon of simple moving average lines consisting of SMA2, SMA3, SMA4, SMA6, SMA7 and SMA8, if enabled. Twisting of the SMA ribbon gives a visual signal for price reversal. Find the locations of price gaps. Draw Bollinger bands (50,2), if enabled. Draw the high and low levels of the previous day, if enabled. Paint the background areas with active Forex trading of Asian, London, and New York sessions, if enabled. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "C>SMA5" and "C13" and "SMA5<13" for SMA(5) crossed above and below SMA(13). - Print "SMA5>50" and "SMA5<50" for SMA(5) crossed above and below SMA(50). - Print "SMA50>200" and SMA50<200" for SMA(50) crossed above and below SMA(200). - Print "Max" and "Min" for local maximum and local minimum bars. - Print "RSI>70" and "RSI<70" for RSI(14) that crossed above 70 % and below 70 %. - Print "RSI<30" and "RSI>30" for RSI(14) that crossed below 30 % and above 30 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. - Print "C75" and "C25" for the bars that closed above 75% and closed below 25% of its ranges. ================================================================================================= The source code of Graph Reader Pro 1.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. A 7-day trial can be requested from the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Graph Reader Pro 1.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scale" tab, choose decimal places of 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose your local time zone. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Forex Insight Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI or MACD indicators with same parameters as those setup in Forex Insight Pro and Volume indicator to your graph. DrGraph regularly publish his educational ideas on using features provided in Forex Insight Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
Forex Insight Pro 8.0Forex Insight Pro 8.0 for TradingView gives you abilities to see the stories hiding in the graphs of the stock, forex, and crypto currency markets. It counts CC59 and creates respectable support and resistance levels as well as marks and reminds you about important parameters that are happening on the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic cc59 counting that compares the close of the right price bar to that of left price bar in a group of 5 consecutive bars (ignoring 3 bars in the middle). If the right bar closed higher, the count positive number would be printed above the bar. If the left bar closed higher, the count negative number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as cc59 support line and nine consecutive series of down counts will define the highest price as cc59 resistance line. The count numbers and support / resistance lines are automatically printed on the graph if enabled. Draw a set of simple moving average lines such as SMA5, SMA13, SMA50, SMA200, SMA800, if enabled. Draw a ribbon of simple moving average lines consisting of SMA2, SMA3, SMA4, SMA6, SMA7, SMA8, and SMA9, if enabled. Twisting of the SMA ribbon gives a visual signal for price reversal. Draw Bollinger bands (50,2), if enabled. The color of SMA5 line can be set to change based on increasing/decreasing values of itself. The color of SMA50 line (which is the same as the the middle line of Bollinger band (50,2) ) can be set to change based on increasing/decreasing values of itself, or of the MACD(12,26,9). Draw the high and low levels of the previous day, if enabled. Paint the background areas with active forex trading of Asian, London, and New York sessions, if enabled. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "SMA5>13" and "SMA5<13" for SMA5 crossed above and below SMA13. - Print "SMA50>200" and SMA50<200" for SMA50 crossed above and below SMA200. - Print "Max" and "Min" for local maximum and local minimum bars. - Print "C75" and "C25" for the bars that closed above 75% and closed below 25% of its ranges. - Print "C>SMA50" and "C3" and "SMA2<3" for SMA2 crossed above and below SMA3. - Print "RSI>30" and "RSI<70" for RSI(14) that crossed above 30 % and below 70 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. - Print "Gap" for the up and down price gaps. ================================================================================================= The source code of Forex Insight Pro 8.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. A 7-day trial can be requested from the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Forex Insight Pro 8.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scale" tab, choose decimal places of 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose your local time zone. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Forex Insight Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI or MACD indicators with same parameters as those setup in Forex Insight Pro and Volume indicator to your graph. DrGraph regularly publish his educational ideas on using features provided in Forex Insight Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
1
Dominus_Option_v_2.0This indicator is designed for trading on the binary options market. The timeframe for use of any (more signals gives a timeframe M1, M5 in a day you get about 5-7 signals per day). When trading on M1 signal is issued for 10-60 seconds before the opening of the transaction. In the indicator settings exhibited the expiration time of the transaction. The green bar indicates a successful transaction, the red one indicates a losing transaction. Priority currency pair EUR USD. ///////// Данный индикатор предназначен для торговли на рынке бинарных опционов. Таймфрейм для использования любой (больше сигналов выдает таймфрейм М1, на М5 в день выдается около 5-7 сигналов за день). При торговле на М1 сигнал выдается за 10-60 секунд до открытия сделки. В настройках индикатора выставляется срок экспирации сделки. Зеленая полоса свидетельствует об успешной сделке, красная об убыточной сделке. Приоритетная валютная пара EURUSD.
Indicatore Pine Script®
di DominusLife
1
Forex Insight Pro 6.0Forex Insight Pro 6.0 for TradingView gives you abilities to see the stories hiding in the graphs of the markets. It marks and reminds you about important parameters that are happening on the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC(X) counting that compare the close of the right price bar to that of left price bar in a group of X consecutive bars such as CC(5,9) of a group of 5 bars will compare the close price of the right bar to the left bar (ignoring 3 bars in the middle). If the right bar closed higher, the count number would be printed above the bar. If the left bar closed higher, the count number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC(5,9) support line and nine consecutive series of down counts will define the highest price as CC(5,9) resistance line. The count numbers and support / resistance lines are automatically printed on the graph if enabled. Show a set of simple moving average lines such as SMA5, SMA13, SMA50, SMA200, SMA800, if enabled. The color of SMA50 line (which is the same as the the middle line of Bollinger band (50,2) can be set to change based on increasing/decreasing values of itself, or of the MACD(12,26,9). Show Bollinger bands (50,2), if enabled. Show the high and low levels of the previous day, if enabled. Show the important time areas for Forex trading during Asian, London, and New York sessions, if enabled. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "SMA5>13" and "SMA5<13" for SMA5 crossed above and below SMA13. - Print "SMA50>200" and SMA50<200" for SMA50 crossed above and below SMA200. - Print "Max" and "Min" for local maximum and local minimum bars. - Print "C75" and "C25" for the bars that closed above 75% and closed below 25% of its ranges. - Print "C>SMA5" and "C30" and "RSI<70" for RSI(14) that crossed above 30 % and below 70 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. - Print "Gap" for the up and down price gaps. ================================================================================================= The source code of Forex Insight Pro 6.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. A 7-day trial can be requested from the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Forex Insight Pro 6.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scale" tab, choose decimal places of 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose your local time zone. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Forex Insight Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI or MACD indicators with same parameters as those setup in Forex Insight Pro and Volume indicator to your graph. DrGraph regularly publish his educational ideas on using features provided in Forex Insight Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
Forex Insight Pro 6.0Forex Insight Pro 6.0 for TradingView gives you abilities to see the stories hiding in the graphs of the markets. It marks and reminds you about important parameters that are happening on the graph so that you will not forget to consider them before placing orders. These parameters include: Automatic CC(X) counting that compare the close of the right price bar to that of left price bar in a group of X consecutive bars such as CC(5,9) of a group of 5 bars will compare the close price of the right bar to the left bar (ignoring 3 bars in the middle). If the right bar closed higher, the count number would be printed above the bar. If the left bar closed higher, the count number would be printed below the bar. Nine consecutive series of up counts will define the lowest price as CC(5,9) support line and nine consecutive series of down counts will define the highest price as CC(5,9) resistance line. The count numbers and support / resistance lines are automatically printed on the graph if enabled. Show a set of simple moving average lines such as SMA5, SMA13, SMA50, SMA200, SMA800, if enabled. The color of SMA50 line (which is the same as the the middle line of Bollinger band (50,2) can be set to change based on increasing/decreasing values of itself, or of the MACD(12,26,9). Show Bollinger bands (50,2), if enabled. Show the high and low levels of the previous day, if enabled. Show the important time areas for Forex trading during Asian, London, and New York sessions, if enabled. Automatic printing of the events happening in the graph to remind the readers of parameters under considerations (if enabled) including: - Print "SMA5>13" and "SMA5<13" for SMA5 crossed above and below SMA13. - Print "SMA50>200" and SMA50<200" for SMA50 crossed above and below SMA200. - Print "Max" and "Min" for local maximum and local minimum bars. - Print "C75" and "C25" for the bars that closed above 75% and closed below 25% of its ranges. - Print "C>SMA5" and "C30" and "RSI<70" for RSI(14) that crossed above 30 % and below 70 %. - Print "MACD>0" and "MACD<0" for MACD(12,26,9) that crossed above and below zero. - Print "MACD>Sig" and "MACD<Sig" for MACD(12,26,9) that crossed above and below their own SMA9. - Print "Gap" for the up and down price gaps. ================================================================================================= The source code of Forex Insight Pro 6.0 custom indicator is protected. Only invited TradingView members can apply this indicator to their forex, crypto currency and stock price graphs. Lifetime invitation is for 100 USD with free future upgrades and online supports. Rental invitation is for 10 USD/month with free future upgrades and online supports. Paypal, Bank transfer and Bitcoin payments are welcome. A 7-day trial can be requested from the author (DrGraph or Nimit Chomnawang, PhD) via TradingView private chat or in the comment field below. ================================================================================================= How to install the script: ------------------------------ *Go to the bottom of this page and click on "Add to Favorite Scripts". *Open a new chart and click on the "Indicators" tab. *Click on the "Favorites" tab and choose "Forex Insight Pro 6.0". *Right click anywhere on the graph, choose "Settings". *In "Style" tab, choose the Dark Theme. *In "Scale" tab, choose decimal places of 1/100000. *In "Background" tab, uncheck "Indicator Arguments" and "Indicator Values". *In "Timezone/Sessions" tab, choose your local time zone. *At the bottom of settings window, click on "Template", "Save As...", then name this theme of graph setting for future call up such as "Forex Insight Pro". *Click OK. For free TradingView plan, you can add two more indicators to the chart. That means you may add RSI or MACD indicators with same parameters as those setup in Forex Insight Pro and Volume indicator to your graph. DrGraph regularly publish his educational ideas on using features provided in Forex Insight Pro for profitable investments. You can follow him for how to use the tools in trading stocks, forex, and binary options.
Indicatore Pine Script®
di nimit.chomnawang
seven multi indicator-복합지표(Mr.J)//=============================== Vdub Binary Options SniperVX v1 ===============================// //--------------------Trend colour ema------------------------------------------------// //--Modified vyacheslav.shindin-------------------------------------------------// //Modified - Rajandran R Supertrend----------------------------------------------------- // //===============================Directional Projection=======================================// //====================================================== 8x MA ======================================================// //====================================================== Ichimoku Cloud ======================================================//
Indicatore Pine Script®
di postnews
6