Inizia

Cerca negli script per "bollingerband"

Percentile Rank of Bollinger BandsThis simple indicator provides you three useful information with Bollinger Bands: How wide the current width (standard deviation) of the Bollinger Band is. Compared to the widths in the past, is the current width relatively small or big? Value is expressed in percentile format. What the "relative position of current price" to the current Bollinger Band is. This indicator can be useful to identify whether the Bollinger Band has substantially "expanded" or "squeezed." First, divide the current standard deviation by the current price, we get the current width. The current width is displayed by the columns at the bottom. When the current width becomes wider, the column becomes taller, and the color is dark green. On the contrary, if the width becomes narrower, the column becomes shorter and the color is light green. Next, compare the current width with the previous N widths, we get the percentile rank for the current width. The percentile rank is shown by the thicker line graph. When the percentile rank grows, it is green; whereas when the rank declines, the color is red. Lastly, calculate (close - lower)/(upper - lower) and we get an idea of the relative height of the current price, compared to the upper and lower band. This is displayed by the thinner line graph. When the relative position becomes higher, the color is in aqua. It is in blue when the relative position becomes lower. Note that since closing prices can go above the upper band or go below the lower band, the values may be greater than 100 or less than 0.
Indicatore Pine Script®
di TheSaltyAustin
1
VWAP Bollinger BandsWhat makes this different from vwap bands / bollinger bands? This indicator takes a bit of inspiration from bollinger but instead of utilizing built in pine script std dev that uses simple moving average internally, this version replaces that with vwap. Also instead of traditional bollinger band basis of 20 period simple moving average, the basis here for the bands is the vwap. How to use it? Usage is similar to vwap itself, though the standard deviation bands will expand and contract like normal bollinger bands instead of vwap bands that just widen as the market movement continues. The bands tell a slightly different story from bollinger bands as the underlying data utilized is the vwap itself. Which markets is this meant for? Any market. What conditions? This aids in finding conditions of entry standard to vwap, but the bands could give key areas of focus for entries and exits better than standard bollinger bands or vwap bands.
Indicatore Pine Script®
di TradeSeekers
5
IS 200EMABB long buy and sellThis script backtested some stocks, it's giving soft buy and strong buy signals, I am using Bollinger band and 200 EMA, Strong Buy :- If price is above 200 ema and cross over 10d ema and sma setup with BB, Buy :- If price is below 200 ema and cross over 10d ema and sma setup with BB, Strong Sell :- If price is below 200 ema and cross over ema and sma with input setup for BB Sell :- If price is above 200 ema and cross over ema and sma with input setup for BB Don't consider it as buy and sell call, do your own research ,i did it according to my experience and learning. Thank you
Indicatore Pine Script®
di ishroid
1
DB KCBB%D Wave SignalsDB KCBB%D Wave Signals What does the indicator do? This indicator is a version of my DB KCBB%D indicator updated with signal detection. It results from weeks of analysis of the KCBB%D waves for patterns. I'm releasing it publicly to help those who like the KCBB%D indicator but desire a version with signals built into it. The indicator plots the percent difference between the low and high prices against a combined Kelpler Channel Bollinger Bands for the current timeframe. The low percent difference and the high percent difference each have their own waves plotted. A mirror mode default allows both waves to be visualized in a mirrored plot that clearly shows when outer bands are present and when they swap. Each percent difference band is displayed with a 1 bar lookback to visualize local tops/bottoms. The overall trend is displayed using two sets of green/red colors on the percent difference waves so that each wave is recognizable, but the overall price trend is visible. A fast 3 SMA is taken of each percent difference wave to obtain the overall trend and then averaged together. The trend is then calculated based on direction from the previous bar period. How should this indicator be used? By default, the indicator will display in a mirror mode which will display both the low and high percent change waves mirrored to allow for the most pattern recognition possible. You will notice the percent difference waves swap from inner to outer, showing the overall market direction for that timeframe. When each percent difference wave interacts with the zero line, it indicates either buys or sells opportunities depending on which band is on the inside. When the inner wave crosses zero, special attention should be paid to the outer wave to know if it's a significant move. Likewise, when the outer wave peaks, it can indicate buy or sell opportunities depending on which wave is on the outside. A zero line and other lines are displayed from the highest of the high percent difference wave over a long period of time. The lines can measure movement and possible oversold/overbought locations or large volatility . You can also use the lines for crossing points for either wave as alerts to know when to buy or sell zones are happening. When individual percent difference waves are designed to be reviewed without mirroring, the mirror checkbox can be unchecked in the settings. Doing so will display both the high and low percent difference waves separately. Using this display, you can more cleanly review how each wave interacts with various line levels. For those who desire to only have half of the mirror or one set of waves inverted against each other, check the "mirrored" and the "mirrored flipped" checkboxes in the settings. Doing so will display the top half of the mirror indicator, which is the low percent difference wave with the high percent difference wave inverted. The indicator will also change the background color of its own pane to indicate possible buy/sell periods (work in progress). Does the indicator include any alerts? Yes, they are a work in progress but starting out with this release, we have: NOTE: This is an initial release version of this indicator. Please do not use these alerts with bots yet, as they will repaint in real-time. NOTE: A later release may happen that will delay firing the events until 1/2 of the current bar time has passed. NOTE: As with any indicator, watch your upper timeframe waves first before zooming into lower. DB KCBB%D Buy Signal DB KCBB%D Buy Warning Signal DB KCBB%D Sell Signal DB KCBB%D Sell Warning Signal DB KCBB%D Death Cross Sell Signal DB KCBB%D Trend Up Alert DB KCBB%D Trend Down Alert Use at your own risk and do your own diligence. Enjoy!
Indicatore Pine Script®
di thefluffyones
BBSS - Bollinger Bands Scalping SignalsModified Bollinger Bands Indicator Added: - color change divergence (green) and narrowing (red) of the upper and lower bands - color change of the moving average - upward trend (green) and downward trend (red) - the appearance of a potential signal for long and short positions when the candle closes behind the upper or lower bands. How to use the indicator: Long conditions: - the price breaks through the upper band - Bollinger bands are expanding and should be green - the mid-line is green - the trigger candle should be green Short conditions: - the price breaks through the lower band - Bollinger bands are expanding and should be red - the mid-line is red - the trigger candle should be red
Indicatore Pine Script®
di berezitskysl
2
DB KCBB%D WavesDB KCBB%D Waves What does the indicator do? The indicator plots the percent difference between the low and high prices against a combined Kelpler Channel Bollinger Bands for the current timeframe. The low percent difference and the high percent difference each have their own waves plotted. A mirror mode default allows both waves to be visualized in a mirrored plot that clearly shows when outer bands are present and when they swap. Each percent difference band is displayed with a 1 bar lookback to visualize local tops/bottoms. The overall trend is displayed using two sets of green/red colors on the percent difference waves so that each wave is recognizable, but the overall price trend is visible. A fast 3 SMA is taken of each percent difference wave to obtain the overall trend and then averaged together. The trend is then calculated based on direction from the previous bar period. How should this indicator be used? By default, the indicator will display in a mirror mode which will display both the low and high percent change waves mirrored to allow for the most pattern recognition possible. You will notice the percent difference waves swap from inner to outer, showing the overall market direction for that timeframe. When each percent difference wave interacts with the zero line, it indicates either buys or sells opportunities depending on which band is on the inside. When the inner wave crosses zero, special attention should be paid to the outer wave to know if it's a significant move. Likewise, when the outer wave peaks, it can indicate buy or sell opportunities depending on which wave is on the outside. A zero line and other lines are displayed from the highest of the high percent difference wave over a long period of time. The lines can measure movement and possible oversold/overbought locations or large volatility. You can also use the lines for crossing points for either wave as alerts to know when to buy or sell zones are happening. When individual percent difference waves are designed to be reviewed without mirroring, the mirror checkbox can be unchecked in the settings. Doing so will display both the high and low percent difference waves separately. Using this display, you can more cleanly review how each wave interacts with various line levels. For those who desire to only have half of the mirror or one set of waves inverted against each other, check the "mirrored" and the "mirrored flipped" checkboxes in the settings. Doing so will display the top half of the mirror indicator, which is the low percent difference wave with the high percent difference wave inverted. The indicator will also change the background color of its own pane to indicate possible buy/sell periods (work in progress). Does the indicator include any alerts? Yes, they are a work in progress but starting out with this release, we have: NOTE: This is an initial release version of this indicator. Please do not use these alerts with bots yet, as they will repaint in real-time. NOTE: A later release may happen that will delay firing the events until 1/2 of the current bar time has passed. NOTE: As with any indicator watch your upper timeframe waves first before zooming into lower. DB KCBB%D Buy Zone Alert DB KCBB%D MEDIUM Buy Alert DB KCBB%D STRONG Buy Alert DB KCBB%D Sell Alert DB KCBB%D STRONG Sell Alert DB KCBB%D Trend Up Alert DB KCBB%D Trend Down Alert Use at your own risk and do your own diligence. Enjoy!
Indicatore Pine Script®
di thefluffyones
3
Bermaui Variety Averages Bands [Loxx]Bermaui Variety Averages Bands is a reverse Bollinger Bands indicator with Loxx's Variety Moving Averages and Loxx's Expanded Source Types. What are Bermaui Bands? Bermaui Bands (BB) is a technical analysis tool that help filter between ranging and trending price movements. A buy signal is made when price crosses above the upper band, a sell signal is made when price crosses below the bottom band. The idea is when the bands are far apart, this is low volatility; when the bands are close together, this is high volatility. Included Loxx's Expanded Source Types Loxx's Moving Averages Alerts Signals
Indicatore Pine Script®
di loxx
4
Bollinger Bands and RSI Short Selling (by Coinrule)The Bollinger Bands are among the most famous and widely used indicators. A Bollinger Band is a technical analysis tool defined by a set of trendlines plotted two standard deviations (positively and negatively) away from a simple moving average ( SMA ) of a security's price, but which can be adjusted to user preferences. They can suggest when an asset is oversold or overbought in the short term, thus provide the best time for buying and selling it. The relative strength index ( RSI ) is a momentum indicator used in technical analysis . RSI measures the speed and magnitude of a security's recent price changes to evaluate overvalued or undervalued conditions in the price of that security. The RSI can do more than point to overbought and oversold securities. It can also indicate securities that may be primed for a trend reversal or corrective pullback in price. It can signal when to buy and sell. Traditionally, an RSI reading of 70 or above indicates an overbought situation. A reading of 30 or below indicates an oversold condition. The short order is placed on assets that present strong momentum when it's more likely that it is about to decrease further. The rule strategy places and closes the order when the following conditions are met: ENTRY The closing price is greater than the upper standard deviation of the Bollinger Bands The RSI is less than 70 EXIT The trade is closed in profit when the RSI is less than 70 Upper standard deviation of the Bollinger Band is greater than the the closing price. This strategy comes with a stop loss and a take profit, and as you can see by the results, it is well suited for a bear market. This trade works very well with ETH (1h timeframe), AVA (4h timeframe), and SOL (3h timeframe) and is backtested from the 1 December 2021 to capture how this strategy would perform in a bear market. To make the results more realistic, the strategy assumes each order to trade 30% of the available capital. A trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange.
Strategia Pine Script®
di Coinrule
1
Williams %R w/ Bollinger Bands [Loxx]Williams %R w/ Bollinger Bands is a Williams %R indicator with Bollinger bands. The Bollinger bands are used to determine when breakouts/breakdowns occur. What is Williams %R? Williams %R , also known as the Williams Percent Range, is a type of momentum indicator that moves between 0 and -100 and measures overbought and oversold levels. The Williams %R may be used to find entry and exit points in the market. The indicator is very similar to the Stochastic oscillator and is used in the same way. It was developed by Larry Williams and it compares a stock’s closing price to the high-low range over a specific period, typically 14 days or periods. Included: bar coloring signals alerts
Indicatore Pine Script®
di loxx
1
.srb suite pin-upThe essential suite Indicator that are well integrated to ensure visibility of essential items for trading. it is very cumbersome to put symbol in the Tradingview chart and combine essential individual indicators one by one. Moreover even with such a combination, the chart is messy and visibility is not good. This is because each indicator is not designed with the others in mind. This suite was developed as a composite-solution to that situation, and will make you happy. --> This is steamlined pin-up version of .srb suite. --> A minimal set of indicators for comparing different symbols. --> This is well-balanced alternative next version of previous .b pin-up symbol BTC-agg. Volume 4 BTC-spot & 4 BTC-PERP volume aggregated. It might helps you don't miss out on important volume flows. Weighted to spot trading volume when using PERP+spot volume . If enabled, BTC-agg.Vol automatically applied when selecting BTC-pair. --> This is used in calculations involving volumes, such as VWAP . Moving Average 1 x JMA trend ribbon ; Accurately follow short-term trend changes. 2 x EMA ribbon ; zone , not the line. MA extension line ; It provide high visibility to recognize the direction of the MA. SPECIAL TOOLS BB regular (Dev. 2.0, 2.5) BB Extented (Dev. 2.5, 3.0, 3.5) SPECIAL TOOLS - Ultra Volume Marking x2 x4 greater than regular average volume, it will help you can take the reversal It does not directly indicate volume, but ultra-volume marking is enough for compare. --------------------------------------------------------------------------------------------------------------------------------------- if you have any questions freely contact to me by message on tradingview but please understand that responses may be quite late. Special thanks to all of contributors of community. The script may be freely distributed under the MIT license.
Indicatore Pine Script®
di sr_b
14
Actieve Inversiones EMABBOL by EDOHEN EMABBOL includes these indicators: - triple emas (9,21,50) - Bollinger Bands - Also includes buying or selling signals The following strategy is based on ema crosses and bollinger ma crosses, the Bollinger band gives us the target we could expect from our trades, using the upper and lower bands. Trading criteria Buy : Price crosses over the triple emas and also crosses under the Bollinger band ema. Looking for 3:1 PnL Sell : Price crosses under the triple emas and also crosses under the Bollinger band ema. Looking for 3:1 PnL Stop Loss Tips : set the SL above the crosses if Selling, below the crosses if buying Take Profit Tips : set the TP below the Bollinger's lower Band band if Selling, or above the Bollinger's upper Band band if Buying
Indicatore Pine Script®
di Jesus_Salvatierra
Rollin' pseudo-Bollinger Bands 5 linear regression curves and new highs/lows mixed together from the basis for this indicator. Using slightly different logic an upper boundary and lower boundary are formed. Then the boundary's are built upon to show price channels within the band using variations of fib levels and the distance between the initial boundary's. Dots plotted show the inverse of the close price relative to either the upper or lower boundary depending on where the close is relative to the center of the band. This shows the market's tendency for symmetry which is useful when looking for reversals etc. If it's too cluttered feel free to turn off some things in the options and keep what you feel is helpful.
Indicatore Pine Script®
di EsIstTurnt
Weight Gain 4000 - (Adjustable Volume Weighted MA) - [mutantdog]Short Version: This is a fairly self-contained system based upon a moving average crossover with several unique features. The most significant of these is the adjustable volume weighting system, allowing for transformations between standard and weighted versions of each included MA. With this feature it is possible to apply partial weighting which can help to improve responsiveness without dramatically altering shape. Included types are SMA, EMA, WMA, RMA, hSMA, DEMA and TEMA. Potentially more will be added in future (check updates below). In addition there are a selection of alternative 'weighted' inputs, a pair of Bollinger-style deviation bands, a separate price tracker and a bunch of alert presets. This can be used out-of-the-box or tweaked in multiple ways for unusual results. Default settings are a basic 8/21 EMA cross with partial volume weighting. Dev bands apply to MA2 and are based upon the type and the volume weighting. For standard Bollinger bands use SMA with length 20 and try adding a small amount of volume weighting. A more detailed breakdown of the functionality follows. Long Version: ADJUSTABLE VOLUME WEIGHTING In principle any moving average should have a volume weighted analogue, the standard VWMA is just an SMA with volume weighting for example. Actually, we can consider the SMA to be a special case where volume is a constant 1 per bar (the value is somewhat arbitrary, the important part is that it's constant). Similar principles apply to the 'elastic' EVWMA which is the volume weighted analogue of an RMA. In any case though, where we have standard and weighted variants it is possible to transform one into the other by gradually increasing or decreasing the weighting, which forms the basis of this system. This is not just a simple multiplier however, that would not work due to the relative proportions being the same when set at any non zero value. In order to create a meaningful transformation we need to use an exponent instead, eg: volume^x , where x is a variable determined in this case by the 'volume' parameter. When x=1, the full volume weighting applies and when x=0, the volume will be reduced to a constant 1. Values in between will result in the respective partial weighting, for example 0.5 will give the square root of the volume. The obvious question here though is why would you want to do this? To answer that really it is best to actually try it. The advantages that volume weighting can bring to a moving average can sometimes come at the cost of unwanted or erratic behaviour. While it can tend towards much closer price tracking which may be desirable, sometimes it needs moderating especially in markets with lower liquidity. Here the adjustability can be useful, in many cases i have found that adding a small amount of volume weighting to a chosen MA can help to improve its responsiveness without overpowering it. Another possible use case would be to have two instances of the same MA with the same length but different weightings, the extent to which these diverge from each other can be a useful indicator of trend strength. Other uses will become apparent with experimentation and can vary from one market to another. THE INCLUDED MODES At the time of publication, there are 7 included moving average types with plans to add more in future. For now here is a brief explainer of what's on offer (continuing to use x as shorthand for the volume parameter), starting with the two most common types. SMA: As mentioned above this is essentially a standard VWMA, calculated here as sma(source*volume^x,length)/sma(volume^x,length). In this case when x=0 then volume=1 and it reduces to a standard SMA. RMA: Again mentioned above, this is an EVWMA (where E stands for elastic) with constant weighting. Without going into detail, this method takes the 1/length factor of an RMA and replaces it with volume^x/sum(volume^x,length). In this case again we can see that when x=0 then volume=1 and the original 1/length factor is restored. EMA: This follows the same principle as the RMA where the standard 2/(length+1) factor is replaced with (2*volume^x)/(sum(volume^x,length)+volume^x). As with an RMA, when x=0 then volume=1 and this reduces back to the standard 2/(length+1). DEMA: Just a standard Double EMA using the above. TEMA: Likewise, a standard Triple EMA using the above. hSMA: This is the same as the SMA except it uses harmonic mean calculations instead of arithmetic. In most cases the differences are negligible however they can become more pronounced when volume weighting is introduced. Furthermore, an argument can be made that harmonic mean calculations are better suited to downtrends or bear markets, in principle at least. WMA: Probably the most contentious one included. Follows the same basic calculations as for the SMA except uses a WMA instead. Honestly, it makes little sense to combine both linear and volume weighting in this manner, included only for completeness and because it can easily be done. It may be the case that a superior composite could be created with some more complex calculations, in which case i may add that later. For now though this will do. An additional 'volume filter' option is included, which applies a basic filter to the volume prior to calculation. For types based around the SMA/VWMA system, the volume filter is a WMA-4, for types based around the RMA/EVWMA system the filter is a RMA-2. As and when i add more they will be listed in the updates at the bottom. WEIGHTED INPUTS The ohlc method of source calculations is really a leftover from a time when data was far more limited. Nevertheless it is still the method used in charting and for the most part is sufficient. Often the only important value is 'close' although sometimes 'high' and 'low' can be relevant also. Since we are volume weighting however, it can be useful to incorporate as much information as possible. To that end either 'hlc3' or 'hlcc4' tend to be the best of the defaults (in the case of 24/7 charting like crypto or intraday trading, 'ohlc4' should be avoided as it is effectively the same as a lagging version of 'hlcc4'). There are many other (infinitely many, in fact) possible combinations that can be created, i have included a few here. The premise is fairly straightforward, by subtracting one value from another, the remaining difference can act as a kind of weight. In a simple case consider 'hl2' as simply the midrange ((high+low)/2), instead of this using 'high+low-open' would give more weight to the value furthest from the open, providing a good estimate of the median. An even better estimate can be achieved by combining that with 'high+low-close' to give the included result 'hl-oc2'. Similarly, 'hlc3' can be considered the basic mean of the three significant values, an included weighted version 'hlc2-o2' combines a sum with subtraction of open to give an estimated mean that may be more accurate. Finally we can apply a similar principle to the close, by subtracting the other values, this one potentially gets more complex so the included 'cc-ohlc4' is really the simplest. The result here is an overbias of the close in relation to the open and the midrange, while in most cases not as useful it can provide an estimate for the next bar assuming that the trend continues. Of the three i've included, hlc2-o2 is in my opinion the most useful especially in this context, although it is perhaps best considered to be experimental in nature. For that reason, i've kept 'hlcc4' as the default for both MAs. Additionally included is an 'aux input' which is the standard TV source menu and, where possible, can be set as outputs of other indicators. THE SYSTEM This one is fairly obvious and straightforward. It's just a moving average crossover with additional deviation (bollinger) bands. Not a lot to explain here as it should be apparent how it works. Of the two, MA1 is considered to be the fast and MA2 is considered to be the slow. Both can be set with independent inputs, types and weighting. When MA1 is above, the colour of both is green and when it's below the colour of both is red. An additional gradient based fill is there and can be adjusted along with everything else in the visuals section at the bottom. Default alerts are available for crossover/crossunder conditions along with optional marker plots. MA2 has the option for deviation bands, these are calculated based upon the MA type used and volume weighted according to the main parameter. In the case of a unweighted SMA being used they will be standard Bollinger bands. An additional 'source direct' price tracker is included which can be used as the basis for an alert system for price crossings of bands or MAs, while taking advantage of the available weighted inputs. This is displayed as a stepped line on the chart so is also a good way to visualise the differences between input types. That just about covers it then. The likelihood is that you've used some sort of moving average cross system before and are probably still using one or more. If so, then perhaps the additional functionality here will be of benefit. Thanks for looking, I welcome any feedack
Indicatore Pine Script®
di mutantdog
1
Bollinger Band Clouds [vnhilton]I recommend to turn off 'Labels on price scale' & 'Values in status line' as this indicator's intended use is for visualizing volatility in the form of overextensions & pullbacks only. Default settings for intraday use - however you can change various settings for your personal use. Bollinger bands is a volatility indicator which plots X standard deviation bands away from the base moving average. When price isn't volatile, bands are compressed (closer to base moving average), & expand when volatility starts to increase - this makes Bollinger bands a great visual indicator for displaying volatility cycles. Although prices aren't normally distributed (i.e. 2 standard deviation bands won't mean 95% of price will lie within the bands), Bollinger bands can be useful to show strong abnormal trends when price is outside the bands, which can be seen as overextensions & will have to retrace sooner or later, towards the moving averages. Price trends within bands are seen as healthy trends (price grinds fit this description). This indicator creates clouds (fill) between 2 different moving average standard deviation bands. The idea is to better visualize strong trends/overextensions as the shorter period standard deviation bands will be outside the longer period bands. This indicator also provides bar color changes for when the bar close is outside the longer period standard deviation bands to help illustrate the strong trends/overextensions. The chart snapshot image shows standard deviation clouds for a 10-20 period SMA. This indicator also allows for better visualization on pullbacks to the mean, by giving a MA cloud between the 2 short & long period MAs.
Indicatore Pine Script®
di vnhilton
1
Adaptive Jurik Filter Volatility Bands [Loxx]Adaptive Jurik Filter Volatility Bands uses Jurik Volty and Adaptive, Double Jurik Filter Moving Average (AJFMA) to derive Jurik Filter smoothed volatility channels around an Adaptive Jurik Filter Moving Average. Bands are placed at 1, 2, and 3 deviations from the core basline. What is Jurik Volty? One of the lesser known qualities of Juirk smoothing is that the Jurik smoothing process is adaptive. "Jurik Volty" (a sort of market volatility ) is what makes Jurik smoothing adaptive. The Jurik Volty calculation can be used as both a standalone indicator and to smooth other indicators that you wish to make adaptive. What is the Jurik Moving Average? Have you noticed how moving averages add some lag (delay) to your signals? ... especially when price gaps up or down in a big move, and you are waiting for your moving average to catch up? Wait no more! JMA eliminates this problem forever and gives you the best of both worlds: low lag and smooth lines. Ideally, you would like a filtered signal to be both smooth and lag-free. Lag causes delays in your trades, and increasing lag in your indicators typically result in lower profits. In other words, late comers get what's left on the table after the feast has already begun. That's why investors, banks and institutions worldwide ask for the Jurik Research Moving Average ( JMA ). You may apply it just as you would any other popular moving average. However, JMA's improved timing and smoothness will astound you. What is adaptive Jurik volatility? One of the lesser known qualities of Juirk smoothing is that the Jurik smoothing process is adaptive. "Jurik Volty" (a sort of market volatility ) is what makes Jurik smoothing adaptive. The Jurik Volty calculation can be used as both a standalone indicator and to smooth other indicators that you wish to make adaptive. What is an adaptive cycle, and what is Ehlers Autocorrelation Periodogram Algorithm? From his Ehlers' book Cycle Analytics for Traders Advanced Technical Trading Concepts by John F. Ehlers , 2013, page 135: "Adaptive filters can have several different meanings. For example, Perry Kaufman’s adaptive moving average ( KAMA ) and Tushar Chande’s variable index dynamic average ( VIDYA ) adapt to changes in volatility . By definition, these filters are reactive to price changes, and therefore they close the barn door after the horse is gone.The adaptive filters discussed in this chapter are the familiar Stochastic , relative strength index ( RSI ), commodity channel index ( CCI ), and band-pass filter.The key parameter in each case is the look-back period used to calculate the indicator. This look-back period is commonly a fixed value. However, since the measured cycle period is changing, it makes sense to adapt these indicators to the measured cycle period. When tradable market cycles are observed, they tend to persist for a short while.Therefore, by tuning the indicators to the measure cycle period they are optimized for current conditions and can even have predictive characteristics. The dominant cycle period is measured using the Autocorrelation Periodogram Algorithm. That dominant cycle dynamically sets the look-back period for the indicators. I employ my own streamlined computation for the indicators that provide smoother and easier to interpret outputs than traditional methods. Further, the indicator codes have been modified to remove the effects of spectral dilation.This basically creates a whole new set of indicators for your trading arsenal." Included - UI options to shut off colors and bands
Indicatore Pine Script®
di loxx
2
Bollinger CloudsThis indicator plots Bollinger Bands for your current timeframe (e.g 5 minutes) and also plots the Bollinger Bands for a higher timeframe (15 minutes for 5 minute timeframe). Then the gaps between the current and higher timeframe upper and lower bands is filled to create clouds which can be used as entry zones. Like Bollinger Bands, this indicator shouldn't be solely used for entries, use it in conjunction with other indicators. Bollinger Band Timeframes Current / Higher 1 minute / 5 minutes 3 minutes / 10 minutes 5 minutes / 15 minutes 10 minutes / 30 minutes 15 minutes / 1 hour 30 minutes / 2 hours 45 minutes / 1.5 hours 1 hour / 4 hours 2 hours / 8 hours 2.5 hours / 10 hours 4 hours / 1 Day 1 Day / 3 Days 3 Days / 9 Days 5 Days / 2 Weeks 1 Week / 1 Month
Indicatore Pine Script®
di LittleSympathy