Inizia

Cerca negli script per "fib"

Fibonacci levels alerted as Support and Resistance lvlsThis script is another Fibonacci script however this script gives select signals indicating when a resistance level is hit aswell as a support level. A resistance level is calculated by price action failing to close or open above a fib level yet its high crossing the level. This essentially means price action was too weak to break this level. The same goes for support levels where the price open and closes above the fib level yet the price low was below. This means the bears where unable to break the support level and may potentially rebound. This script uses the 0.764, 0.618, 0.5, 0.382 and 0.236 levels. More can be added to script if asked. From personal use I use the script to help guide the entry and exit for potential trades aswell as helping mark price targets and exit levels. However i never use this script alone and actively ensure it is used alongside other technical indicators. Within the script there is also a plotted Fibonacci retracement chart which can help visually aid the trader.
Indicatore Pine Script®
di Mikey_Scali
1
(Custom)Bollingers Bands Fibonacci ratiosThis is a modified Bollinger bands that uses EMA,with ATH to get a main average and then takes Standard Deviations by Fib ratios outwards. It is very useful for Entries and exits. I Typically use it to exit longs or shorts, entries are a bit harder. Generally the price will wick just barely or briefly into the end of one of the bands and then leave, it PINGs it and that is your exit. It is a little hard to predict in real time and set a Take profit at any exact point because it is always moving, but because it constantly adjust it is pretty damn accurate at nailing it. They sorta work at any timeframe, so its up to you, though for Crypto it doesnt do so well above 4hr because it can pump really hard or dump hard and super stretch the bands. Best numbers for the Average are Fib numbers. Stick to using 13, 21, and 34. 34 is my favorite and works best for me, But its up to you. Sometimes its benificial to use 34 on lower timeframes and maybe a smaller number on larger ones IE 21 or 2 or 4hr charts. Once again it is up to you how to use it. I dont have credit for the original version of it. It is someone else's who I think modified another person's version lol. Ill try and find their name and post a comment though for who I took the original code from.
Indicatore Pine Script®
di rustygeeart
1
VPTbollfib & Camarilla (Danarilla)I do not own the original indicators. This is just a combination of the two because of their nature to work in a similar way. Camarilla Pivots run on the basis of intraday range trading. Usually after daily open you look the fade whatever move happened before. by shorting R3/H3 levels or longing R3/L3. Targeting the other side of the range. This is the infamous PivotBoss level calculations and you would want to activate camarilla and turn off the normal pivots. They use the previous days volatility to plot the next days levels. But what about some confirmation? Well RafaelIzoni (who made it open source for improvement) threw together this VPTbollfib. It is volume price trend crossing down a fib line using bollinger bands as price envelope. The beauty of this is that It will signal usually counter to current price action based on selling into uptrends or vise versa. Meaning you get signals to counter price. Which is what you might be looking for on range day trade scalps for camarilla. A wick reversal or engulfing + volume based signal is a very happy pairing together. And those signals are usually suitable for the target of the range you are day trading. Hourly time frame works quite well for both. And camarilla should also be on daily settings. Special Thanks to Nanda (who published the pivotboss indicator AND) Helped to merge the scripts together. This indicator alone is an entire trade system. Camarilla already is. If you know the rules. it can be used for entries, exits, risk management to trade the range on TREND, COUNTER TREND, and BREAKOUT plays. The bollinger band fibs add confirmation to the trends levels. And the VPT adds a secondary confirmation to take a camarilla trade. Try it out. I think you will find both the levels on camarilla and the VPT signals quite suprising.
Indicatore Pine Script®
di Gunslinger2005
57
The 6 Line Death PunchIf you are looking to discover what trend you are in, you need to first what direction the price is going in... I've been using and testing a mixture of EMA's and SMA's for a long time and I've found that these ones are by far the best. EMA 3 EMA 8 MA 20 EMA 55 MA 100 MA 200 EMA 3 & 8 Crossover is a good method for confirming a coin going to the upside or to the downside. EMA 8 is known as the Trigger Line (trademarked brand) as one of the fib numbers it shows good support or resistance of a trend. MA 20 universal way of seeing trend direction in the stock market, works well with crypto too. EMA 55, another trusty fib number. Works very well and could trade off that alone as support and resistance. MA 100 and MA 200. Long ranged moving averages which govern the overall longer-term trend. LONG ENTRY Option 1 - 3/8 crossover Option 2 - Candles above EMA 8 Option 3 - Candles above MA 20 Option 4 - Candles Above EMA 55. SHORT ENTRY Option 1 - 3/8 crossover Option 2 - Candles below EMA 8 Option 3 - Candles below MA 20 Option 4 - Candles below EMA 55.
Indicatore Pine Script®
di CryptoMobster
3
Logarithmic Fibonacci RetraceThis script will allow you to use Logarithmic (instead of linear) Fibonacci retrace. Please see excellent write up here: www.elliottwavetrader.net explaining why logarithmic is preferred, especially over large price movement and long timeframes. All TradingView fib tools use linear math, and will show incorrect long-term levels because of this. HOW TO USE: * Enter your points for Wave 0 and 1. Example: 1810.10 and 2872.87 in the SPX chart shown. * Turn on "show lines" and "show labels". These are OFF by default because the chart will usually get warped if you display the lines before entering the actual values you want. * Change the "label offset" if the fib labels are too close or too far from the chart. Please be aware that this is considered an "INDICATOR" script and so will not save the values separately for each chart. You will need to enter new values each time you change to a different symbol.
Indicatore Pine Script®
di nj_guy72
1
Logarithmic Fibonacci ExtensionThis script will allow you to use Logarithmic (instead of linear) Fibonacci extensions. Please see excellent write up here: www.elliottwavetrader.net explaining why logarithmic is preferred, especially over large price movement and long timeframes. All TradingView fib tools use linear math, and will show incorrect long-term levels because of this. HOW TO USE: * Enter your points for Wave 0, 1, and 2. Example: 666.79, 1219.80, 1010.91 in the SPX chart shown. * Turn on "show lines" and "show labels". These are OFF by default because the chart will usually get warped if you display the lines before entering the actual values you want. * Change the "label offset" if the fib labels are too close or too far from the chart. * Select up to 2.000, 3.000, and 4.000 to display higher-power fibs. Please be aware that this is considered an "INDICATOR" script and so will not save the values separately for each chart. You will need to enter new values each time you change to a different symbol.
Indicatore Pine Script®
di nj_guy72
Fractals V9 ModifiedSo taking Ricardo Santos script for fractals V9 -I change the time function of the high TF fractal to non repainting one adding daily fib levels This hybrid seems to look nice . I have to admit that all credit to Ricardo Santos for his exelent script. thi work it hybrid work and not so much original work.... The main improvment is the signals which are not reapinting as we remove security from that. Security function exist for daily fib but it has nothing to do wih signal generation so i did not touch it
Indicatore Pine Script®
di RafaelZioni
11
RSX FracticalityA little project I was working on to avoid studying for finals. Using LazyBear's RSX code for a smoother RSI, then taking the RSX of fib number lengths. Take the average of that, then the JMA of that from the same fib numbers. The average of that is then treated as the trend, take the average of the trend values from the main time frames, the script calls pretty far back so adding a W or M TF I think would throw the calculations off. Then I smoothed that value using the jma's to create the overall trend. I got the idea from Ehler's Empirical Mode Decomposition about identifying peaks and valleys and creating an average of that to create a range. The idea is that if the trend is above the Average Peak then it is a bull trend, less than the average valley it's a bear trend, in between it's ranging. It looks like it turned out alright, I'll be working on this idea of fractals a lot this summer to see if I can improve it or build something better off of the idea.
Indicatore Pine Script®
di wpatte15
3
Fibonacci Commodity Stenth IndexFibonacci Commodity Strength Value tells us about the strength and weakness of bull or bear market. The main focus in this is too be done at reversal. It can also be used for identifying fake ups/downs. If all the 4 lines moves upward after a huge up spike, then notice the values of all 4 values. If red fib is smaller than green fib then it is a fake trend. If its more then its uptrend and same for bear movement. ;) It also represents cci (in terms of values) and rsi (in terms of waves). Enjoy !!!!!
Indicatore Pine Script®
di LensOfChartist
5
Automatic Daily Fibonacci v0.3 by JustUncleLThis update is a correction on the way the Fib Zero line is calculated. Previously it was just based on the source of the previous day, which is Ok as long as the Fiblength was set to 2. The new version calculates the Fib Zero from the average of the specified source over the Fiblength, so if Fiblength is now something other than 2 the Fibonacci Zero and other support and resistant levels should calculate correctly.
Indicatore Pine Script®
di JustUncleL
13
Everyday 0003 _ MAC Pullback I recently posted a Moving Averge Crossover strategy for my Everyday project - a project I've given myself where I try to create one strategy everyday in between 15 minutes and 2 hours. In the comments of my last published idea, user SignalTradersUK was very kind and suggested I try the following in my next study: "i think your next study should be, to workout what to do after the Moving Average cross! If you look just on the chart you have posted, Price would appear to always come back to the levels where the 2 MA's cross and then go back in the direction of the crossing of the MA's. It's a great pull back strategy." I'm really just beginning to learn about coding strategies so I'm not 100% sure I correctly understood his suggestion. I admit I had difficulties wrapping my head around how to do this. Anyway, the result is a strategy which runs alongside the main Moving Average Crossover. 'The Algorithm' When the fast and slow MA cross the strategy traces back 40 days to find a swing low. This swing low and the price at the MA cross is used to calculate a fib 1.272 extension. The price at this 1.272 extension is used to place a Pullback short order. Since we're shorting a bull trend, a tight stop is used. If the pullback reaches down to the fib 0.618 we take profit (close the short). Like I said, I don't know if I correctly understood SignalTradersUK feedback, but I really appreciate the feedback and advice! As always I'm hoping to learn from the community, so all feedback, corrections and advice is very welcome! Thanks! /pbergden
Strategia Pine Script®
di pbergden
12
Indicators: 6 RSI variationsAs we all know, as published by Wilder, RSI makes use of "CLOSE" values. You probably have experimented changing the input to hl2 or hlc3 . I have included many other RSI variations in this chart. Refer to the developers section below to learn how you can use this code in your scripts. 1) RSI with Volume --------------------------------------------- Suggested by Morris, this idea adds volume to the RSI indicator. Because volume offers one means of determining whether money is entering or leaving a market, this would provide additional information with which to make trading decisions. 2) RSI using last Open --------------------------------------------- This is RSI with yesterday's open, This basically compares two full days of price action and in the process produces a smoother RSI line. RSI of today's close is used as a signal (blue line). 3) RSI using SMA --------------------------------------------- Wilder used his own MA for calculating RSI (check my post on Wilders MA here - -- This closely resembles EMA). One of Morris's suggestion is to try out SMA. Compared to normal RSI, you will see more squiggles here. 4) RSI using EMA --------------------------------------------- Same idea as above, but using EMA. 5) RSI with Fibs --------------------------------------------- How much does RSI retrace? This makes it easy to determine that :) 6) RSI of MACD --------------------------------------------- As I mentioned earlier, RSI is a pluggable formula. You can substitute "close" with any data series to derive an index out of it. This shows RSI of MACD. Note that this is range bound. More info on RSI variations: drive.google.com For Pinescript developers: --------------------------------------------- You can substitute your favorite indicator in the RSI function. I have made the RSI calculation a separate function in all the indicators above. Following are the reusable functions (simply copy to your script and call with proper arguments): * WiMA(src, length) * calc_rsi(fv, length): This is equivalent to stock rsi() in TV. * calc_rsi_volume(fv, length) * calc_rsi_sma(fv, length) * calc_rsi_ema(fv, length) * calc_rsi_lastopen(fv, length) * calc_macd(src, fast, slow) You can also pick up fibs drawing code and put in on any indicator.
Indicatore Pine Script®
di LazyBear
16
Auto-Fibonacci Levels [ChartWhizzperer]Auto-Fibonacci Levels Discover one of the most elegant and flexible Fibonacci indicators for TradingView – fully automatic, tastefully understated, and built entirely in Pine Script V6. Key Features: - Automatically detects the most recent swing high and swing low. - Plots Fibonacci retracement levels and extensions (including 161.8%, 261.8%) perfectly aligned to the prevailing trend. - Distinctive, dashed lines with crystal-clear price labels right at the price scale for maximum clarity. - Line length and label offset are fully customisable for your charting preference. - Absolutely no repainting: Only confirmed swings are used for reliable signals. - Parameter: "Swing Detection Length" The “Swing Detection Length” parameter determines how many bars must appear to the left and right of a potential high or low for it to be recognised as a significant swing point. - Higher values make the script less sensitive (only major turning points are detected). - Lower values make it more responsive to minor fluctuations (more fibs, more signals). For best results, adjust this setting according to your preferred timeframe and trading style. Pro Tip: Fibonacci levels refresh automatically whenever a new swing is confirmed. Ideal for price action enthusiasts and Fibonacci purists alike. Licence: // Licence: CC BY-NC-SA 4.0 – Non-commercial use only, attribution required. // © ChartWhizzperer
Indicatore Pine Script®
di ChartWhizzperer
Volume VA with POC Based Percent DeviationsThis is a slightly different take on my previous version that plotted fibonacci retracement levels based on the POC to value area high/low. This indicator is also based on the volume value area that plots developing POC, VAH, and VAL as well as historical levels. However, instead of plotting fib levels, this script automatically projects percentage deviation levels from the current POC. This can help identify potential overextensions, target areas, or mean-reversion setups. Knowing where price is and the change in price relative to areas of interest can help identify true value and market imbalances. Hence the name VALUE AREA :) The percent deviation levels are dynamically plotted in relation to the developing POC. As POC shifts so do the % levels. Gradient Value Area Fill: Instead of a static color, the Value Area is filled with a dynamic gradient. The adjustable color and transparency shift is based on the current price's distance from the POC, giving you an intuitive feel for where price is relative to the POC. Enjoy! "May the fourth leaf bring you extra luck!" 🍀
Indicatore Pine Script®
di ShamrockShane