Inizia

Cerca negli script per "high low"

Relative Volume at Time█  OVERVIEW This indicator calculates relative volume, which is the ratio of present volume over an average of past volume. It offers two calculation modes, both using a time reference as an anchor.                                          █  CONCEPTS Calculation modes The simplest way to calculate relative volume is by using the ratio of a bar's volume over a simple moving average of the last n volume values. This indicator uses one of two, more subtle ways to calculate both values of the relative volume ratio: current volume:past volume . The two calculations modes are:  1 — Cumulate from Beginning of TF to Current Bar where:     current volume = the cumulative volume since the beginning of the timeframe unit, and     past volume = the mean of volume during that same relative period of time in the past n timeframe units.  2 — Point-to-Point Bars at Same Offset from Beginning of TF where:     current volume = the volume on a single chart bar, and     past volume = the mean of volume values from that same relative bar in time from the past n timeframe units. Timeframe units Timeframe units can be defined in three different ways:  1 — Using Auto-steps, where the timeframe unit automatically adjusts to the timeframe used on the chart:     — A 1 min timeframe unit will be used on 1sec charts,     — 1H will be used for charts at 1min and less,     — 1D will be used for other intraday chart timeframes,     — 1W will be used for 1D charts,     — 1M will be used for charts at less than 1M,     — 1Y will be used for charts at greater or equal than 1M.  2 — As a fixed timeframe that you define.  3 — By time of day (for intraday chart timeframes only), which you also define. If you use non-intraday chart timeframes in this mode, the indicator will switch to Auto-steps. Relative Relativity A relative volume value of 1.0 indicates that current volume is equal to the mean of past volume , but how can we determine what constitutes a high relative volume value? The traditional way is to settle for an arbitrary threshold, with 2.0 often used to indicate that relative volume is worthy of attention. We wanted to provide traders with a contextual method of calculating threshold values, so in addition to the conventional fixed threshold value, this indicator includes two methods of calculating a threshold channel on past relative volume values:  1 — Using the standard deviation of relative volume over a fixed lookback.  2 — Using the highs/lows of relative volume over a variable lookback. Channels calculated on relative volume provide meta-relativity, if you will, as they are relative values of relative volume. █  FEATURES Controls in the "Display" section of inputs determine what is visible in the indicator's pane. The next "Settings" section is where you configure the parameters used in the calculations. The "Column Coloring Conditions" section controls the color of the columns, which you will see in three of the five display modes available. Whether columns are plotted or not, the coloring conditions also determine when markers appear, if you have chosen to show the markers in the "Display" section. The presence of markers is what triggers the alerts configured on this indicator. Finally, the "Colors" section of inputs allows you to control the color of the indicator's visual components. Display Five display modes are available:  • Current Volume Columns : shows columns of current volume , with past volume displayed as an outlined column.  • Relative Volume Columns : shows relative volume as a column.  • Relative Volume Columns With Average : shows relative volume as a column, with the average of relative volume.  • Directional Relative Volume Average : shows a line calculated using the average of +/- values of relative volume.   The positive value of relative volume is used on up bars; its negative value on down bars.  • Relative Volume Average : shows the average of relative volume. A Hull moving average is used to calculate the average used in the three last display modes. You can also control the display of:  • The value or relative volume, when in the first three display modes. Only the last 500 values will be shown.  • Timeframe transitions, shown in the background.  • A reminder of the active timeframe unit, which appears to the right of the indicator's last bar.  • The threshold used, which can be a fixed value or a channel, as determined in the next "Settings" section of inputs.  • Up/Down markers, which appear on transitions of the color of the volume columns (determined by coloring conditions), which in turn control when alerts are triggered.  • Conditions of high volatility. Settings Use this section of inputs to change:  • Calculation mode : this is where you select one of this indicator's two calculation modes for current volume and past volume , as explained in the "Concepts" section.  • Past Volume Lookback in TF units : the quantity of timeframe units used in the calculation of past volume .  • Define Timeframes Units Using : the mode used to determine what one timeframe unit is. Note that when using a fixed timeframe, it must be higher than the chart's timeframe.   Also, note that time of day timeframe units only work on intraday chart timeframes.  • Threshold Mode : Five different modes can be selected:    — Fixed Value : You can define the value using the "Fixed Threshold" field below. The default value is 2.0.    — Standard Deviation Channel From Fixed Lookback : This is a channel calculated using the simple moving average of relative volume     (so not the Hull moving average used elsewhere in the indicator), plus/minus the standard deviation multiplied by a user-defined factor.     The lookback used is the value of the "Channel Lookback" field. Its default is 100.    — High/Low Channel From Beginning of TF : in this mode, the High/Low values reset at the beginning of each timeframe unit.    — High/Low Channel From Beginning of Past Volume Lookback : in this mode, the High/Low values start from the farthest point back where we are calculating past volume ,     which is determined by the combination of timeframe units and the "Past Volume Lookback in TF units" value.    — High/Low Channel From Fixed Lookback : In this mode the lookback is fixed. You can define the value using the "Channel Lookback" field. The default value is 100.  • Period of RelVol Moving Average : the period of the Hull moving average used in the "Directional Relative Volume Average" and the "Relative Volume Average".  • High Volatility is defined using fast and slow ATR periods, so this represents the volatility of price.   Volatility is considered to be high when the fast ATR value is greater than its slow value. Volatility can be used as a filter in the column coloring conditions. Column Coloring Conditions  • Eight different conditions can be turned on or off to determine the color of the volume columns. All "ON" conditions must be met to determine a high/low state of relative volume,   or, in the case of directional relative volume, a bull/bear state.  • A volatility state can also be used to filter the conditions.  • When the coloring conditions and the filter do not allow for a high/low state to be determined, the neutral color is used.  • Transitions of the color of the volume columns determined by coloring conditions are used to plot the up/down markers, which in turn control when alerts are triggered. Colors  • You can define your own colors for all of the oscillator's plots.  • The default colors will perform well on light or dark chart backgrounds. Alerts  • An alert can be defined for the script. The alert will trigger whenever an up/down marker appears in the indicator's display.   The particular combination of coloring conditions and the display settings for up/down markers when you create the alert will determine which conditions trigger the alert.   After alerts are created, subsequent changes to the conditions controlling the display of markers will not affect existing alerts.  • By configuring the script's inputs in different ways before you create your alerts, you can create multiple, functionally distinct alerts from this script.   When creating multiple alerts, it is useful to include in the alert's message a reminder of the particular conditions you used for each alert.  • As is usually the case, alerts triggering "Once Per Bar Close" will prevent repainting. Error messages Error messages will appear at the end of the chart upon the following conditions:  • When the combination of the timeframe units used and the "Past Volume Lookback in TF units" value create a lookback that is greater than 5000 bars.   The lookback will then be recalculated to a value such that a runtime error does not occur.  • If the chart's timeframe is higher than the timeframe units. This error cannot occur when using Auto-steps to calculate timeframe units.  • If relative volume cannot be calculated, for example, when no volume data is available for the chart's symbol.  • When the threshold of relative volume is configured to be visible but the indicator's scale does not allow it to be visible (in "Current Volume Columns" display mode). █  NOTES For traders The chart shown here uses the following display modes: "Current Volume Columns", "Relative Volume Columns With Average", "Directional Relative Volume Average" and "Relative Volume Average". The last one also shows the threshold channel in standard deviation mode, and the TF Unit reminder to the right, in red. Volume, like price, is a value with a market-dependent scale. The only valid reference for volume being its past values, any improvement in the way past volume is calculated thus represents a potential opportunity to traders. Relative volume calculated as it is here can help traders extract useful information from markets in many circumstances, markets with cyclical volume such as Forex being one, obvious case. The relative nature of the values calculated by this indicator also make it a natural fit for cross-market and cross-sector analysis, or to identify behavioral changes in the different futures contracts of the same market. Relative volume can also be put to more exotic uses, such as in evaluating changes in the popularity of exchanges. Relative volume alone has no directional bias. While higher relative volume values always indicate higher trading activity, that activity does not necessarily translate into significant price movement. In a tightly fought battle between buyers and sellers, you could theoretically have very large volume for many bars, with no change whatsoever in bid/ask prices. This of course, is unlikely to happen in reality, and so traders are justified in considering high relative volume values as indicating periods where more attention is required, because imbalances in the strength of buying/selling power during high-volume trading periods can amplify price variations, providing traders with the generally useful gift of volatility. Be sure to give the "Directional Relative Volume Average" a try. Contrary to the always-positive ratio widely used in this indicator, the "Directional Relative Volume Average" produces a value able to determine a bullish/bearish bias for relative volume. Note that realtime bars must be complete for the relative volume value to be confirmed. Values calculated on historical or elapsed realtime bars will not recalculate unless historical volume data changes. Finally, as with all indicators using volume information, keep in mind that some exchanges/brokers supply different feeds for intraday and daily data, and the volume data on both feeds can sometimes vary quite a bit. For coders Our script was written using the PineCoders Coding Conventions for Pine . The description was formatted using the techniques explained in the How We Write and Format Script Descriptions PineCoders publication. Bits and pieces of code were lifted from the MTF Selection Framework and the MTF Oscillator Framework , also by PineCoders. █  THANKS Thanks to dgtrd for suggesting to add the channel using standard deviation. Thanks to adolgov for helpful suggestions on calculations and visuals. Look first. Then leap.
Indicatore Pine Script®
di TradingView
52
Extrapolated Pivot Connector - Lets Make Support And ResistancesIntroduction The support and resistance methodology remain the most used one in technical analysis, this is mainly due to its simplicity, and unlike lots of techniques used in technical analysis support and resistances have a certain logic, price can sometimes appear moving into a channel, support and resistances allow the trader to estimate such channel and project it into the future in order to spot points where price might reverse direction. In this script a simple linear support and resistance indicator is proposed, the indicator is made by connecting past pivot high's/low's to more recent ones and extrapolating the resulting connection. The indicator is also able to make support and resistances by using other indicators as input. Indicator Settings The indicator include various settings, the first one being the length setting who determine the sensitivity of the pivot high/low detection, low values of length will detect the pivot high/low of noisy variations, while higher values will detect the pivot high/low of longer term variations. The figure above use length = 5. The A-High parameter determine the position of the pivot high to be used as first point of the resistance line, higher values will use oldest pivot high's as first point. The B-High parameter determine the last pivot high. A-Low and B-Low work the same way but affect the support line, a label is drawn on the chart in order to help you determine the position of A/B-High/Low. Using Other Indicators Output As Input The "Use Custom Source" option allow you to apply the indicator to other indicators, for example we can use a moving average of period 50 as input Or the rsi : Let me help you set the proposed indicator easily to indicators appearing on a separate window, for example the momentum oscillator, add the momentum oscillator to the chart, to do so click on indicator and search "momentum", click on the first result, once on the chart put your mouse pointer on the indicator title, you'll see appearing the hide, settings and delete option, at the right of delete you should see three dots which represent the "more" option, click on it and select "Add indicator on Mom" and select the extrapolated pivot indicator, you can do that by searching it, altho it might be easier to do it by adding the indicator to favorites first, you then only need to select it from your favorites. You might see a mess on the indicator window, thats because the extrapolated pivot is still using high and low as input, go to the settings of the extrapolated pivot indicator and check "Use Custom Source", it should appear properly now. Tips And Tricks When Using Support And Resistances Linear support and resistances assume an approximately linear trend, if you see non linear growth in the price evolution you can use a logarithmic scale in order to have a more linear evolution. To do so right click on the the chart scale and select "Logarithmic" or use the following key shortcut "alt + l". When applying the indicator to an oscillator centered around zero make sure to adjust the settings of the oscillator such that the peak magnitude of the oscillator is relatively constant over time. Here a roc of period 9 has non constant peak amplitude, you can see that by looking at the position of the pivots (circles), increasing the period of the roc help capture more significant pivots high's/low's Conclusion In this post an indicator aiming to draw support and resistances is presented, the fact that it can be applied to any other indicator is a relatively nice option, and i hope you might make use of this feature. The code make heavy use of the new features that where integrated on the v4 of pine, such features are really focused on making figures and labels, things i don't really work with, but it is nice to step out my short codes habits, and i don't exclude working with figures in pine in the future. Thanks for reading !
Indicatore Pine Script®
di alexgrover
83
Smart MTF S/R Levels[BullByte] Smart MTF S/R Levels Introduction & Motivation Support and Resistance (S/R) levels are the backbone of technical analysis. However, most traders face two major challenges: Manual S/R Marking: Drawing S/R levels by hand is time-consuming, subjective, and often inconsistent. Multi-Timeframe Blind Spots: Key S/R levels from higher or lower timeframes are often missed, leading to surprise reversals or missed opportunities. Smart MTF S/R Levels was created to solve these problems. It is a fully automated, multi-timeframe, multi-method S/R detection and visualization tool, designed to give traders a complete, objective, and actionable view of the market’s most important price zones. What Makes This Indicator Unique? Multi-Timeframe Analysis: Simultaneously analyzes up to three user-selected timeframes, ensuring you never miss a critical S/R level from any timeframe. Multi-Method Confluence: Integrates several respected S/R detection methods—Swings, Pivots, Fibonacci, Order Blocks, and Volume Profile—into a single, unified system. Zone Clustering: Automatically merges nearby levels into “zones” to reduce clutter and highlight areas of true market consensus. Confluence Scoring: Each zone is scored by the number of methods and timeframes in agreement, helping you instantly spot the most significant S/R areas. Reaction Counting: Tracks how many times price has recently interacted with each zone, providing a real-world measure of its importance. Customizable Dashboard: A real-time, on-chart table summarizes all key S/R zones, their origins, confluence, and proximity to price. Smart Alerts: Get notified when price approaches high-confluence zones, so you never miss a critical trading opportunity. Why Should a Trader Use This? Objectivity: Removes subjectivity from S/R analysis by using algorithmic detection and clustering. Efficiency: Saves hours of manual charting and reduces analysis fatigue. Comprehensiveness: Ensures you are always aware of the most relevant S/R zones, regardless of your trading timeframe. Actionability: The dashboard and alerts make it easy to act on the most important levels, improving trade timing and risk management. Adaptability: Works for all asset classes (stocks, forex, crypto, futures) and all trading styles (scalping, swing, position). The Gap This Indicator Fills Most S/R indicators focus on a single method or timeframe, leading to incomplete analysis. Manual S/R marking is error-prone and inconsistent. This indicator fills the gap by: Automating S/R detection across multiple timeframes and methods Objectively scoring and ranking zones by confluence and reaction Presenting all this information in a clear, actionable dashboard How Does It Work? (Technical Logic) 1. Level Detection For each selected timeframe, the script detects S/R levels using: SW (Swing High/Low): Recent price pivots where reversals occurred. Pivot: Classic floor trader pivots (P, S1, R1). Fib (Fibonacci): Key retracement levels (0.236, 0.382, 0.5, 0.618, 0.786) over the last 50 bars. Bull OB / Bear OB: Institutional price zones based on bullish/bearish engulfing patterns. VWAP / POC: Volume Weighted Average Price and Point of Control over the last 50 bars. 2. Level Clustering Levels within a user-defined % distance are merged into a single “zone.” Each zone records which methods and timeframes contributed to it. 3. Confluence & Reaction Scoring Confluence: The number of unique methods/timeframes in agreement for a zone. Reactions: The number of times price has touched or reversed at the zone in the recent past (user-defined lookback). 4. Filtering & Sorting Only zones within a user-defined % of the current price are shown (to focus on actionable areas). Zones can be sorted by confluence, reaction count, or proximity to price. 5. Visualization Zones: Shaded boxes on the chart (green for support, red for resistance, blue for mixed). Lines: Mark the exact level of each zone. Labels: Show level, methods by timeframe (e.g., 15m (3 SW), 30m (1 VWAP)), and (if applicable) Fibonacci ratios. Dashboard Table: Lists all nearby zones with full details. 6. Alerts Optional alerts trigger when price approaches a zone with confluence above a user-set threshold. Inputs & Customization (Explained for All Users) Show Timeframe 1/2/3: Enable/disable analysis for each timeframe (e.g., 15m, 30m, 1h). Show Swings/Pivots/Fibonacci/Order Blocks/Volume Profile: Select which S/R methods to include. Show levels within X% of price: Only display zones near the current price (default: 3%). How many swing highs/lows to show: Number of recent swings to include (default: 3). Cluster levels within X%: Merge levels close together into a single zone (default: 0.25%). Show Top N Zones: Limit the number of zones displayed (default: 8). Bars to check for reactions: How far back to count price reactions (default: 100). Sort Zones By: Choose how to rank zones in the dashboard (Confluence, Reactions, Distance). Alert if Confluence >=: Set the minimum confluence score for alerts (default: 3). Zone Box Width/Line Length/Label Offset: Control the appearance of zones and labels. Dashboard Size/Location: Customize the dashboard table. How to Read the Output Shaded Boxes: Represent S/R zones. The color indicates type (green = support, red = resistance, blue = mixed). Lines: Mark the precise level of each zone. Labels: Show the level, methods by timeframe (e.g., 15m (3 SW), 30m (1 VWAP)), and (if applicable) Fibonacci ratios. Dashboard Table: Columns include: Level: Price of the zone Methods (by TF): Which S/R methods and how many, per timeframe (see abbreviation key below) Type: Support, Resistance, or Mixed Confl.: Confluence score (higher = more significant) React.: Number of recent price reactions Dist %: Distance from current price (in %) Abbreviations Used SW = Swing High/Low (recent price pivots where reversals occurred) Fib = Fibonacci Level (key retracement levels such as 0.236, 0.382, 0.5, 0.618, 0.786) VWAP = Volume Weighted Average Price (price level weighted by volume) POC = Point of Control (price level with the highest traded volume) Bull OB = Bullish Order Block (institutional support zone from bullish price action) Bear OB = Bearish Order Block (institutional resistance zone from bearish price action) Pivot = Pivot Point (classic floor trader pivots: P, S1, R1) These abbreviations appear in the dashboard and chart labels for clarity. Example: How to Read the Dashboard and Labels (from the chart above) Suppose you are trading BTCUSDT on a 15-minute chart. The dashboard at the top right shows several S/R zones, each with a breakdown of which timeframes and methods contributed to their detection: Resistance zone at 119257.11: The dashboard shows: 5m (1 SW), 15m (2 SW), 1h (3 SW) This means the level 119257.11 was identified as a resistance zone by one swing high (SW) on the 5-minute timeframe, two swing highs on the 15-minute timeframe, and three swing highs on the 1-hour timeframe. The confluence score is 6 (total number of method/timeframe hits), and there has been 1 recent price reaction at this level. This suggests 119257.11 is a strong resistance zone, confirmed by multiple swing highs across all selected timeframes. Mixed zone at 118767.97: The dashboard shows: 5m (2 SW), 15m (2 SW) This means the level 118767.97 was identified by two swing points on both the 5-minute and 15-minute timeframes. The confluence score is 4, and there have been 19 recent price reactions at this level, indicating it is a highly reactive zone. Support zone at 117411.35: The dashboard shows: 5m (2 SW), 1h (2 SW) This means the level 117411.35 was identified as a support zone by two swing lows on the 5-minute timeframe and two swing lows on the 1-hour timeframe. The confluence score is 4, and there have been 2 recent price reactions at this level. Mixed zone at 118291.45: The dashboard shows: 15m (1 SW, 1 VWAP), 5m (1 VWAP), 1h (1 VWAP) This means the level 118291.45 was identified by a swing and VWAP on the 15-minute timeframe, and by VWAP on both the 5-minute and 1-hour timeframes. The confluence score is 4, and there have been 12 recent price reactions at this level. Support zone at 117103.10: The dashboard shows: 15m (1 SW), 1h (1 SW) This means the level 117103.10 was identified by a single swing low on both the 15-minute and 1-hour timeframes. The confluence score is 2, and there have been no recent price reactions at this level. Resistance zone at 117899.33: The dashboard shows: 5m (1 SW) This means the level 117899.33 was identified by a single swing high on the 5-minute timeframe. The confluence score is 1, and there have been no recent price reactions at this level. How to use this: Zones with higher confluence (more methods and timeframes in agreement) and more recent reactions are generally more significant. For example, the resistance at 119257.11 is much stronger than the resistance at 117899.33, and the mixed zone at 118767.97 has shown the most recent price reactions, making it a key area to watch for potential reversals or breakouts. Tip: “SW” stands for Swing High/Low, and “VWAP” stands for Volume Weighted Average Price. The format 15m (2 SW) means two swing points were detected on the 15-minute timeframe. Best Practices & Recommendations Use with Other Tools: This indicator is most powerful when combined with your own price action analysis and risk management. Adjust Settings: Experiment with timeframes, clustering, and methods to suit your trading style and the asset’s volatility. Watch for High Confluence: Zones with higher confluence and more reactions are generally more significant. Limitations No Future Prediction: The indicator does not predict future price movement; it highlights areas where price is statistically more likely to react. Not a Standalone System: Should be used as part of a broader trading plan. Historical Data: Reaction counts are based on historical price action and may not always repeat. Disclaimer This indicator is a technical analysis tool and does not constitute financial advice or a recommendation to buy or sell any asset. Trading involves risk, and past performance is not indicative of future results. Always use proper risk management and consult a financial advisor if needed.
Indicatore Pine Script®
di BullByte
2
Info TableOverview The Info Table V1 is a versatile TradingView indicator tailored for intraday futures traders, particularly those focusing on MESM2 (Micro E-mini S&P 500 futures) on 1-minute charts. It presents essential market insights through two customizable tables: the Main Table for predictive and macro metrics, and the New Metrics Table for momentum and volatility indicators. Designed for high-activity sessions like 9:30 AM–11:00 AM CDT, this tool helps traders assess price alignment, sentiment, and risk in real-time. Metrics update dynamically (except weekly COT data), with optional alerts for key conditions like volatility spikes or momentum shifts. This indicator builds on foundational concepts like linear regression for predictions and adapts open-source elements for enhanced functionality. Gradient code is adapted from TradingView's Color Library. QQE logic is adapted from LuxAlgo's QQE Weighted Oscillator, licensed under CC BY-NC-SA 4.0. The script is released under the Mozilla Public License 2.0. Key Features Two Customizable Tables: Positioned independently (e.g., top-right for Main, bottom-right for New Metrics) with toggle options to show/hide for a clutter-free chart. Gradient Coloring: User-defined high/low colors (default green/red) for quick visual interpretation of extremes, such as overbought/oversold or high volatility. Arrows for Directional Bias: In the New Metrics Table, up (↑) or down (↓) arrows appear in value cells based on metric thresholds (top/bottom 25% of range), indicating bullish/high or bearish/low conditions. Consensus Highlighting: The New Metrics Table's title cells ("Metric" and "Value") turn green if all arrows are ↑ (strong bullish consensus), red if all are ↓ (strong bearish consensus), or gray otherwise. Predicted Price Plot: Optional line (default blue) overlaying the ML-predicted price for visual comparison with actual price action. Alerts: Notifications for high/low Frahm Volatility (≥8 or ≤3) and QQE Bias crosses (bullish/bearish momentum shifts). Main Table Metrics This table focuses on predictive, positional, and macro insights: ML-Predicted Price: A linear regression forecast using normalized price, volume, and RSI over a customizable lookback (default 500 bars). Gradient scales from low (red) to high (green) relative to the current price ± threshold (default 100 points). Deviation %: Percentage difference between current price and predicted price. Gradient highlights extremes (±0.5% default threshold), signaling potential overextensions. VWAP Deviation %: Percentage difference from Volume Weighted Average Price (VWAP). Gradient indicates if price is above (green) or below (red) fair value (±0.5% default). FRED UNRATE % Change: Percentage change in U.S. unemployment rate (via FRED data). Cell turns red for increases (economic weakness), green for decreases (strength), gray if zero or disabled. Open Interest: Total open MESM2 futures contracts. Gradient scales from low (red) to high (green) up to a hardcoded 300,000 threshold, reflecting market participation. COT Commercial Long/Short: Weekly Commitment of Traders data for commercial positions. Long cell green if longs > shorts (bullish institutional sentiment); Short cell red if shorts > longs (bearish); gray otherwise. New Metrics Table Metrics This table emphasizes technical momentum and volatility, with arrows for quick bias assessment: QQE Bias: Smoothed RSI vs. trailing stop (default length 14, factor 4.236, smooth 5). Green for bullish (RSI > stop, ↑ arrow), red for bearish (RSI < stop, ↓ arrow), gray for neutral. RSI: Relative Strength Index (default period 14). Gradient from oversold (red, <30 + threshold offset, ↓ arrow if ≤40) to overbought (green, >70 - offset, ↑ arrow if ≥60). ATR Volatility: Score (1–20) based on Average True Range (default period 14, lookback 50). High scores (green, ↑ if ≥15) signal swings; low (red, ↓ if ≤5) indicate calm. ADX Trend: Average Directional Index (default period 14). Gradient from weak (red, ↓ if ≤0.25×25 threshold) to strong trends (green, ↑ if ≥0.75×25). Volume Momentum: Score (1–20) comparing current to historical volume (lookback 50). High (green, ↑ if ≥15) suggests pressure; low (red, ↓ if ≤5) implies weakness. Frahm Volatility: Score (1–20) from true range over a window (default 24 hours, multiplier 9). Dynamic gradient (green/red/yellow); ↑ if ≥7.5, ↓ if ≤2.5. Frahm Avg Candle (Ticks): Average candle size in ticks over the window. Blue gradient (or dynamic green/red/yellow); ↑ if ≥0.75 percentile, ↓ if ≤0.25. Arrows trigger on metric-specific logic (e.g., RSI ≥60 for ↑), providing directional cues without strict color ties. Customization Options Adapt the indicator to your strategy: ML Inputs: Lookback (10–5000 bars) and RSI period (2+) for prediction sensitivity—shorter for volatility, longer for trends. Timeframes: Individual per metric (e.g., 1H for QQE Bias to match higher frames; blank for chart timeframe). Thresholds: Adjust gradients and arrows (e.g., Deviation 0.1–5%, ADX 0–100, RSI overbought/oversold). QQE Settings: Length, factor, and smooth for fine-tuned momentum. Data Toggles: Enable/disable FRED, Open Interest, COT for focus (e.g., disable macro for pure intraday). Frahm Options: Window hours (1+), scale multiplier (1–10), dynamic colors for avg candle. Plot/Table: Line color, positions, gradients, and visibility. Ideal Use Case Perfect for MESM2 scalpers and trend traders. Use the Main Table for entry confirmation via predicted deviations and institutional positioning. Leverage the New Metrics Table arrows for short-term signals—enter bullish on green consensus (all ↑), avoid chop on low volatility. Set alerts to catch shifts without constant monitoring. Why It's Valuable Info Table V1 consolidates diverse metrics into actionable visuals, answering critical questions: Is price mispriced? Is momentum aligning? Is volatility manageable? With real-time updates, consensus highlights, and extensive customization, it enhances precision in fast markets, reducing guesswork for confident trades. Note: Optimized for futures; some metrics (OI, COT) unavailable on non-futures symbols. Test on demo accounts. No financial advice—use at your own risk. The provided script reuses open-source elements from TradingView's Color Library and LuxAlgo's QQE Weighted Oscillator, as noted in the script comments and description. Credits are appropriately given in both the description and code comments, satisfying the requirement for attribution. Regarding significant improvements and proportion: The QQE logic comprises approximately 15 lines of code in a script exceeding 400 lines, representing a small proportion (<5%). Adaptations include integration with multi-timeframe support via request.security, user-customizable inputs for length, factor, and smooth, and application within a broader table-based indicator for momentum bias display (with color gradients, arrows, and alerts). This extends the original QQE beyond standalone oscillator use, incorporating it as one of seven metrics in the New Metrics Table for confluence analysis (e.g., consensus highlighting when all metrics align). These are functional enhancements, not mere stylistic or variable changes. The Color Library usage is via official import (import TradingView/Color/1 as Color), leveraging built-in gradient functions without copying code, and applied to enhance visual interpretation across multiple metrics. The script complies with the rules: reused code is minimal, significantly improved through integration and expansion, and properly credited. It qualifies for open-source publication under the Mozilla Public License 2.0, as stated.
Indicatore Pine Script®
di charleyRT
IDKFAIDKFA - Advanced Order Blocks & Volume Profile with Market Structure Analysis Why IDKFA? Named after the legendary DOOM cheat code that gives players "all weapons and full ammo," IDKFA provides traders with a comprehensive arsenal of market analysis tools. Just as the cheat code arms players with everything needed for combat, this indicator equips traders with essential market structure tools: Order Blocks, Volume Profile, LVN/HVN areas, Fibonacci retracements, and intelligent buy/sell signals - all in one unified system. Core Features Order Blocks Detection Automatically identifies institutional order blocks using pivot high/low analysis Extends blocks dynamically until price interaction occurs Bullish blocks (demand zones) and bearish blocks (supply zones) Customizable opacity and extend functionality Advanced Volume Profile Real-time volume profile calculation for multiple session types Point of Control (POC), Value Area High (VAH), and Value Area Low (VAL) Mode 1: Side-by-side bull/bear volume display Mode 2: Overlapped volume display with percentage analysis Shows buying vs selling pressure at each price level LVN/HVN Area Detection Low Volume Nodes (LVN): Areas below VAL where price moves quickly High Volume Nodes (HVN): Areas above VAH with strong resistance NPOC (Naked Point of Control): Single print areas within Value Area Volume-based gradient coloring shows relative activity levels Smart Fibonacci Retracements Auto-detects trend direction for proper fibonacci orientation Dynamic color coding: Red levels in uptrends, Gold in downtrends Special 88.6% level turns lime green in downtrends Key levels: 23.6%, 38.2%, 50%, 61.8%, 65%, 78.6%, 88.6% Intelligent Signal System Works best on higher timeframes Identifies high-probability reversal setups at key levels Buy signals: Large bearish rejection followed by bullish reclaim Sell signals: Large bullish rejection followed by bearish breakdown Signals only trigger near significant support/resistance areas Signal Analysis & Usage Guidelines Buy Signal Mechanics The buy signal triggers when: Previous candle shows significant bearish movement (minimum ATR multiplier) Current candle reclaims a configurable percentage of the previous candle's range Price is near a key support level (order blocks, fibonacci, volume levels) Sell Signal Mechanics The sell signal triggers when: Previous candle shows significant bullish movement (minimum ATR multiplier) Current candle rejects below a configurable percentage of the previous candle's range Price is near a key resistance level (order blocks, fibonacci, volume levels) When to TAKE Signals High Probability Buy Signals: Signal appears AT or BELOW the VAL (Value Area Low) Signal occurs at bullish order block confluence Price is in LVN area below VAL (momentum acceleration zone) Signal aligns with fibonacci 61.8% or 78.6% support Multiple session POC levels provide support confluence Previous session's VAL acting as current support High Probability Sell Signals: Signal appears AT or ABOVE the VAH (Value Area High) Signal occurs at bearish order block confluence Price is in HVN area above VAH (heavy resistance zone) Signal aligns with fibonacci 61.8% or 78.6% resistance Multiple session POC levels provide resistance confluence Previous session's VAH acting as current resistance When to AVOID Signals Avoid Buy Signals When: Signal appears ABOVE the VAH (buying into resistance) Price is in HVN red zones (high volume resistance areas) No clear support structure below current price Volume profile shows heavy selling pressure (high bear percentages) Signal occurs during low-volume periods between major sessions Multiple bearish order blocks exist below current price Avoid Sell Signals When: Signal appears BELOW the VAL (selling into support) Price is in LVN green zones (momentum could continue) No clear resistance structure above current price Volume profile shows heavy buying pressure (high bull percentages) Signal occurs during Asian session ranges without clear direction Multiple bullish order blocks exist above current price Volume Profile Context for Signals Understanding Bull/Bear Percentages: 70%+ Bull dominance at a level = Strong support expected 70%+ Bear dominance at a level = Strong resistance expected 50/50 Split = Neutral zone, less predictable Use percentages to gauge conviction behind moves POC (Point of Control) Interactions: Signals above POC in uptrend = Higher probability Signals below POC in downtrend = Higher probability Signals against POC bias require extra confirmation POC often acts as magnetic level for price return Trading Strategies Strategy 1: VAL/VAH Bounce Strategy Wait for price to approach VAL (support) or VAH (resistance) Look for signal confirmation at these critical levels Enter with tight stops beyond the Value Area Target opposite boundary or next session's levels Strategy 2: Order Block + Volume Confluence Identify order block alignment with VAL/VAH Wait for signal within the confluence zone Enter on signal with stop beyond order block Use LVN areas as acceleration zones for targets Strategy 3: LVN/HVN Strategy LVN (Green) Areas: "Go Zones" - expect quick price movement through low volume HVN (Red) Areas: "Stop Zones" - expect resistance and potential reversals NPOC Areas: "Fill Zones" - price often returns to fill single print gaps Strategy 4: Multi-Session Analysis Use Daily/Weekly for major structure context Use 4H for intermediate levels Use 1H for precise entry timing Ensure all timeframes align before taking signals Strategy 5: Fibonacci + Volume Profile Buy signals at 61.8% or 78.6% fibonacci near VAL Sell signals at 61.8% or 78.6% fibonacci near VAH Use 88.6% level as final support/resistance before major moves 50% level often aligns with POC for confluence Signal Quality Assessment Grade A Signals (Highest Probability): Signal at VAL/VAH with order block confluence Fibonacci level alignment (61.8%, 78.6%) Volume profile shows 70%+ dominance in signal direction Multiple timeframe structure alignment Signal occurs during high-volume sessions (London/NY) Grade B Signals (Moderate Probability): Signal near POC with some confluence Fibonacci 50% or 38.2% alignment Mixed volume profile readings (50-70% dominance) Some timeframe alignment present Signal during overlap sessions Grade C Signals (Lower Probability): Signal with minimal confluence Weak fibonacci alignment or none Volume profile neutral or against signal Conflicting timeframe signals Signal during low-volume periods Risk Management Guidelines Position Sizing Based on Signal Quality: Grade A: Standard position size Grade B: Reduced position size (50-75%) Grade C: Minimal position size (25%) or skip entirely Stop Loss Placement: Beyond order block boundaries Outside Value Area (VAL/VAH) Below/above fibonacci confluence levels Account for session volatility ranges Profit Targets: First target: Opposite VAL/VAH boundary Second target: Next session's key levels Final target: Major order blocks or fibonacci extensions Credits & Attribution Original components derived from: Market Sessions & Volume Profile by © Leviathan (Mozilla Public License 2.0) Volume Profile elements inspired by @LonesomeTheBlue's volume profile script Pivot Order Blocks by TradingWolf / © MensaTrader (Mozilla Public License 2.0) Auto Fibonacci Retracement code (public domain) Significant enhancements and modifications include: Advanced LVN/HVN detection and visualization Bull/Bear percentage analysis for Mode 2/3 Comprehensive alert system with market context Integrated buy/sell signals at key levels Performance optimizations and extended session support Enhanced Mode 2/3 with percentage pressure analysis Important Disclaimers This indicator is a technical analysis tool designed for educational purposes. It does not provide financial advice, investment recommendations, or trading signals that guarantee profits. All trading involves substantial risk of loss, and past performance does not guarantee future results. Users should conduct their own research, understand the risks involved, and consider consulting with qualified financial advisors before making trading decisions. The signals and analysis provided are based on historical price patterns and volume data, which may not predict future market movements accurately. Best Practices Never trade signals blindly - always consider volume profile context Wait for confluence between multiple tools before entering Respect the Value Area - avoid buying above VAH or selling below VAL Use session context - Asian ranges vs London/NY breakouts Practice proper risk management - position size based on signal quality Understand the bigger picture - use multiple timeframes for context Remember: Like the IDKFA cheat code, having all the tools doesn't guarantee success. The key is learning to use them together effectively and understanding when NOT to take a signal is often more important than knowing when to take one.
Indicatore Pine Script®
di MessyJess
4
Open Range Breakout (ORB) with Alerts 🚀 ChartsAlgo – Open Range Breakout (ORB) with Alerts The Open Range Breakout (ORB) Indicator by ChartsAlg is designed for intraday traders looking to capitalize on price movements after the market’s opening range. This tool is especially effective for futures (MNQ, MES) and high-volatility stocks or crypto where initial volatility sets the tone for the session. This indicator identifies a user-defined opening range window, plots the high/low lines of that range, and visually alerts users when price breaks out above or below the range — with options to customize breakout repetitions, background fill, and alerts. 💡 What is an Open Range Breakout (ORB)? The opening range represents the high and low established during the first few minutes of the trading session — usually 15 or 30 minutes. Many intraday strategies are based on the idea that breaking out of this initial range often signals strong momentum and trend continuation. Traders often enter: Long when price breaks above the range high. Short when price breaks below the range low. ⚙️ How It Works You define a session window (e.g., 09:30–09:45 EST). The indicator tracks the high and low during this time. Once the session ends, the high and low become your range breakout levels. The indicator then: Plots lines for visual clarity Optionally fills background between the range Triggers breakout signals if price crosses the levels Provides alerts when breakouts occur 🛠️ Settings Breakdown 🔹 Session Settings Range Session: Set your preferred window (e.g., 0930–0945). Can be premarket, first 30 mins, or any custom time. Time zone: Use "America/New York" for EST (default) or change to "GMT+0" for international traders. 🔹 Breakout Settings Bullish Breakout Signals: Number of allowed breakout alerts above the range. Bearish Breakout Signals: Number of allowed breakout alerts below the range. This prevents repeated alerts once breakout has been confirmed. 🔹 Display Settings Show Background Fill: Fills area between high/low of the range for easier visual analysis. Show Breakout Signals: Triangle markers plotted on the chart when breakouts happen. Only Show Today’s Range: Keeps the chart clean by showing only the most current day’s range. 🔹 Color Settings Range High/Low Line Colors: Choose any color for clarity. Range Fill Color: Customize the highlight area for your chart style. 📊 Chart Features Range High/Low Lines: Automatically plotted after range session ends. Visual Fill Box: Optional background shading between the opening range. Triangle Breakout Markers: Appear at the breakout candle. Alerts: Can be used with TradingView’s alert system to notify you of breakouts in real-time. 🔔 Alerts Two alert conditions are built in: Bullish Breakout: Triggers when price breaks above the high of the range. Bearish Breakout: Triggers when price breaks below the low of the range. Example Alert Message: 📈 “Bullish Breakout above Open Range on AAPL!” To activate: Click “🔔 Alerts” on TradingView. Set condition to this script. Choose “ORB Breakout Up” or “ORB Breakout Down”. Choose alert frequency and notification method. ⚠️ DISCLAIMER ChartsAlgo tools are for informational and educational purposes only. They are not financial advice or signals. Past performance does not guarantee future results. Use at your own risk and always implement solid risk management. By using this indicator, you agree that you are solely responsible for any trades or decisions made based on the information provided.
Indicatore Pine Script®
di ChartsAlgo
Market Sentiment Index US Top 40 [Pt]▮Overview Market Sentiment Index US Top 40 [Pt} shows how the largest US stocks behave together. You pick one simple measure—High Low breakouts, Above Below moving average, or RSI overbought/oversold—and see how many of your chosen top 10/20/30/40 NYSE or NASDAQ names are bullish, neutral, or bearish. This tool gives you a quick view of broad-market strength or weakness so you can time trades, confirm trends, and spot hidden shifts in market sentiment. ▮Key Features ► Three Simple Modes High Low Index: counts stocks making new highs or lows over your lookback period Above Below MA: flags stocks trading above or below their moving average RSI Sentiment: marks overbought or oversold stocks and plots a small histogram ► Universe Selection Top 10, 20, 30, or 40 symbols from NYSE or NASDAQ Option to weight by market cap or treat all symbols equally ► Timeframe Choice Use your chart’s timeframe or any intraday, daily, weekly, or monthly resolution ► Histogram Smoothing Two optional moving averages on the sentiment bars Markers show when the faster average crosses above or below the slower one ► Ticker Table Optional on-chart table showing each ticker’s state in color Grid or single-row layout with adjustable text size and color settings ▮Inputs ► Mode and Lookback Pick High Low, Above Below MA, or RSI Sentiment Set lookback length (for example 10 bars) If using Above Below MA, choose the moving average type (EMA, SMA, etc.) ► Universe Setup Market: NYSE or NASDAQ Number of symbols: 10, 20, 30, or 40 Weights: on or off Timeframe: blank to match chart or pick any other ► Moving Averages on Histogram Enable fast and slow averages Set their lengths and types Choose colors for averages and markers ► Table Options Show or hide the symbol table Select text size: tiny, small, or normal Choose layout: grid or one-row Pick colors for bullish, neutral, and bearish cells Show or hide exchange prefixes ▮How to Read It ► Sentiment Bars Green means bullish Red means bearish Near zero means neutral ► Zero Line Separates bullish from bearish readings ► High Low Line (High Low mode only) Smooth ratio of highs versus lows over your lookback ► MA Crosses Fast MA above slow MA hints rising breadth Fast MA below slow MA hints falling breadth ► Ticker Table Each cell colored green, gray, or red for bull, neutral, or bear ▮Use Cases ► Confirm Market Trends Early warning when price makes highs but breadth is weak Catch rallies when breadth turns strong while price is flat ► Spot Sector Rotation Switch between NYSE and NASDAQ to see which group leads Watch tech versus industrial breadth to track money flow ► Filter Trade Signals Enter longs only when breadth is bullish Consider shorts when breadth turns negative ► Combine with Other Indicators Use RSI Sentiment with trend tools to spot overextended moves Add volume indicators in High Low mode for breakout confirmation ► Timeframe Analysis Daily for big-picture bias Intraday (15-min) for precise entries and exits
Indicatore Pine Script®
di PtGambler
1
Intraday Pivot Highs & Lows (Asia London NY)Intraday Pivot Highs & Lows (Asia London NY) Script Description This TradingView indicator is optimized for Forex, scalping, intraday, and day trading strategies. It accurately plots Pivot Points and levels, high/low, support and resistance levels. These are clearly identified to aid the trader during killzone sessions and session opens. Ideal for scalp trading, intraday sessions, and leveraging SMT (Smart Money Techniques). Utilize these Price Levels effectively during London Open, NY Open, and the Asia Session, utilizing Market Structure to pinpoint key levels and reversal zones for successful trading. Improve your Trade Setups, recognize reliable Chart Patterns, identify critical Price Pivots, and trade confidently off Institutional Levels. This script marks the intraday pivot highs, lows and midpoints retracement levels for Asia London New York It also plots the previous day's high, low, midpoint, and 0.618 Fibonacci retracement levels, providing traders with critical price reference points for making intraday trading decisions. Originality & Usefulness This indicator uniquely integrates pivot calculations across three major Forex sessions (Asia, London, NY), clearly delineating session boundaries. It enhances visibility by using distinct styling solid for New York dashed for London dotted lines for Asia And colour co-ordinated labeling, improving traders' ability to identify important intraday price action zones efficiently. Unlike standard pivot indicators, this script emphasizes session-specific trading dynamics. ### Key Features ### Session-Based Levels: Automatically plots high, low, midpoint, and Fibonacci (.618) levels for each major session (Asia, London, NY). Distinct Visual Cues: Lines and labels use session-specific styles and colors to easily differentiate between sessions. Previous Day Reference: Clearly plots and labels yesterday's high, low, midpoint, and Fibonacci levels. Flexible Visibility: Traders can set timeframe visibility to maintain clean charts on higher timeframes. ### How It Works At the start of next day's session, previous session lines are cleared, ensuring the chart remains uncluttered. High, low, midpoint, and Fibonacci retracement levels (.618) are dynamically calculated and displayed at the close of each session. All session levels remain visible until the start of the next respective session, providing continuous actionable insights. Trading Application: Session highs and lows act as strong intraday support and resistance zones. Midpoints and Fibonacci levels are effective for identifying potential reversal zones and retracements. Daily levels provide a broader context, useful for gauging intraday volatility and range. ### Limitations and Considerations ## Best used on liquid assets with clear session-based price action, such as Forex major pairs, if used on indexes make sure they contain 24 hour price action not just New York session. This indicator is designed to streamline intraday trading by clearly marking essential pivot points and session-based levels, significantly improving traders' market context and decision-making accuracy. Can be used to enhance SMT decision making when scalping killzones.
Indicatore Pine Script®
di Volfgang
Opening Range and Market BoundariesOpening Range and Market Boundaries This versatile and insightful indicator combines two powerful concepts frequently used by professional traders: Opening Range Analysis and Market Boundaries derived from previous high/low levels. It is specifically designed to support intraday trading strategies and helps you identify key price zones for entries, exits, and breakout confirmations. 🔍 Features & Utility 1. Opening Range Box What it does: Highlights the high and low of the first candle after market open (9:15 AM IST) with a shaded box. This box spans the full trading session, from 9:15 AM to 3:30 PM, representing the key price range where the initial balance is formed. Timeframe Compatibility: The Opening Range box is optimized for 1-minute to 1-hour charts. It is most effective on lower timeframes (1m, 5m, 15m, 30m) where intraday price movements and breakout patterns can be clearly observed. Usage Tips: Breakouts above or below the Opening Range box can signal potential directional bias for the rest of the trading day. Price consolidating within the range may indicate a choppy or range-bound session. Works well with volume and momentum indicators for confirmation. 2. Market Boundaries What it does: Plots horizontal lines at: Previous Day High/Low Previous Week High/Low Previous Month High/Low Why it matters: These levels act as natural support and resistance zones, and are commonly watched by institutional traders, making them crucial for: Spotting reversals or breakouts Planning stop-loss and target zones Avoiding trades around high-rejection areas Customization Options: Toggle ON/OFF for Daily, Weekly, and Monthly levels. Independent colors and line thickness for each level, enabling you to distinguish between different timeframes easily. 🛠️ How to Use Effectively Use during market open: Switch to a 5-minute or 15-minute chart during the first few candles of the session. Observe the Opening Range box formation and plan trades based on breakout direction. Confluence Trading: Look for price action near previous session highs/lows in confluence with the Opening Range box edges. These intersections often become high-probability zones for breakouts or reversals. Session Preparation: Before the market opens, analyze where the price is relative to past high/low boundaries. If it's near a weekly/monthly level, be cautious — those areas can cause whipsaws or false breakouts. Avoid low-volume breakouts: Use this indicator in conjunction with volume tools or price action confirmation to validate the strength of a move outside the Opening Range or Market Boundaries. 📌 Summary This indicator is designed for intraday traders, scalpers, and swing traders who want a reliable structure to guide their decisions. It visually marks the opening balance of the market and essential higher timeframe boundaries, helping you trade with discipline and precision.
Indicatore Pine Script®
di jochacko11
4
[TTM] ICT Sessions & Ranges🌟 Overview 🌟 The ICT Sessions & Ranges Indicator helps traders identify key intraday price levels by marking custom session highs/lows and opening ranges. It helps traders spot potential liquidity grabs, reversals, and breakout zones by tracking price behavior around these key areas 🌟 Session Highs & Lows – Liquidity Zones 🌟 Session highs and lows often attract price due to stop orders resting above or below them. These levels are frequently targeted during high-volatility moves. 🔹 Asia Session - Usually ranges in low volatility. - Highs/lows often get swept during early London. - Price may raid these levels, then reverse. 🔹 London Session - First major volatility of the day. - Highs/lows often tested or swept in New York. - Commonly forms the day’s true high or low. 🌟 Opening Range Concepts 🌟 The Opening Range is the first 15, 30, or 60 minutes of a session (e.g., New York). The high (ORH) and low (ORL) define the market’s initial balance and key reaction levels. 🔹 Breakout Trade - Price breaks ORH/ORL with momentum. - Signals directional intent. - Traders enter on the breakout, with stops inside the range. 🔹 Liquidity Raid - Price briefly breaks ORH/ORL to trigger stops. - Reverses after the sweep. - Look for structure shift and entry near FVG or OB. 🌟 Customizable Settings 🌟 The indicator includes 3 configurable ranges , each with: Start & End Time – Set any custom time window. Display Type – Choose Box (highlight range) or Lines (mark high/low). Color Settings – Set custom colors for boxes and lines. 🌟 Default Settings 🌟 Range 1 : 19:00–00:00 (Asia Session) Range 2 : 01:45–05:15 (London Session) Range 3 : 09:30–10:00 (NY Opening Range – 30m)
Indicatore Pine Script®
di TheTickMagnet
5
PowerHouse SwiftEdge AI v2.10 with Custom Filters & AI AnalysisPowerHouse SwiftEdge AI v2.10 with Custom Filters & AI Analysis Overview PowerHouse SwiftEdge AI v2.10 is an advanced TradingView Pine Script indicator designed to identify high-probability trading setups by combining pivot-based structure analysis, multi-timeframe trend detection, and adaptive AI-driven signal filtering. The script integrates Change of Character (CHoCH) and Break of Structure (BOS) signals with customizable momentum, volume, breakout, and trend filters to enhance trade precision. Additionally, it offers an optional AI Market Analysis module that predicts future price trends across multiple timeframes, providing traders with a comprehensive market outlook. The script is highly customizable, allowing users to tailor inputs to their trading style, whether for scalping, swing trading, or long-term strategies. It is suitable for all asset classes, including stocks, forex, crypto, and commodities, and performs optimally on timeframes ranging from 1-minute to daily charts. Key Features Pivot-Based Signal Generation: Identifies pivot highs and lows to detect CHoCH (reversal patterns) and BOS (continuation patterns). Signals are plotted as "Buy" or "Sell" labels with optional "Get Ready" pre-signals to prepare traders for potential setups. Take-profit (TP) levels are automatically calculated based on user-defined points, with optional TP box visualization. Multi-Timeframe Trend Analysis: Analyzes trends across seven timeframes (1M, 5M, 15M, 30M, 1H, 4H, D) using EMA and VWAP to determine bullish, bearish, or neutral conditions. Displays a futuristic AI-Trend Matrix dashboard showing trend direction, strength, and confidence levels for quick decision-making. Customizable Signal Filters: Momentum Filter: Ensures signals align with significant price changes, adjusted dynamically using ATR-based volatility. Higher Timeframe Trend Filter: Requires signals to align with the trend of a user-selected higher timeframe (e.g., 1H). Lower Timeframe Trend Filter: Prevents signals that conflict with the trend of a user-selected lower timeframe (e.g., 5M). Volume Filter: Optionally requires above-average volume to confirm signals. Breakout Filter: Optionally requires price to break previous highs/lows for signal validation. Repeated Signal Restriction: Prevents consecutive signals in the same trend direction until the trend changes on a user-defined timeframe. AI-Driven Adaptivity: Incorporates Cumulative Volume Delta (CVD) to assess buying/selling pressure and classify market volatility (Low, Medium, High). Uses ATR to dynamically adjust momentum thresholds, ensuring signals adapt to current market conditions. Optional AI Market Analysis module predicts trends across multiple timeframes by combining trend, momentum, and volatility scores. Visual Elements: Plots CHoCH and BOS levels as horizontal lines with distinct colors (aqua for CHoCH sell, lime for CHoCH buy, fuchsia for BOS sell, teal for BOS buy). Draws dynamic support and resistance trendlines based on short and long-term price action, colored by trend strength. Displays TP levels and pivot highs/lows for easy reference. How It Works The script combines several technical analysis concepts to create a robust trading system: Market Structure Analysis: Pivot highs and lows are identified using a user-defined lookback period (Pivot Length). CHoCH occurs when price crosses below a pivot high (bearish reversal) or above a pivot low (bullish reversal). BOS occurs when price breaks a previous pivot low (bearish continuation) or pivot high (bullish continuation). Trend and Momentum Integration: Trends are determined by comparing price to EMA and VWAP on multiple timeframes. Momentum is calculated as the percentage price change, with thresholds adjusted by ATR to account for volatility. "Get Ready" signals appear when momentum approaches the threshold, preparing traders for potential CHoCH or BOS signals. Signal Filtering: Filters ensure signals align with user-defined criteria (e.g., trend direction, volume, breakouts). The Restrict Repeated Signals option prevents over-signaling by requiring a trend change on a specified timeframe before generating a new signal in the same direction. AI Market Analysis: The optional AI module calculates a score for each timeframe based on trend direction, momentum, and volatility (ATR compared to its SMA). Scores are translated into predictions (▲ for bullish, ▼ for bearish, — for neutral), displayed in a dedicated table. CVD and Volatility Context: CVD tracks buying vs. selling pressure by accumulating volume based on price direction. Volatility is classified using CVD magnitude, influencing the script’s visual cues and signal sensitivity. Why This Combination? The integration of pivot-based structure analysis, multi-timeframe trend filtering, and AI-driven adaptivity addresses common trading challenges: Precision: CHoCH and BOS signals focus on key market turning points, reducing noise from minor price fluctuations. Context: Multi-timeframe analysis ensures trades align with broader market trends, improving win rates. Adaptivity: ATR and CVD adjustments make the script responsive to changing market conditions, avoiding static thresholds that fail in volatile or quiet markets. Customization: Extensive input options allow traders to adapt the script to their preferred markets, timeframes, and risk profiles. Predictive Insight: The AI Market Analysis module provides forward-looking trend predictions, helping traders anticipate market moves. This combination creates a self-contained system that balances responsiveness with reliability, making it suitable for both novice and experienced traders. How to Use Add to Chart: Apply the indicator to your TradingView chart for any asset and timeframe. Recommended timeframes: 5M to 1H for scalping/day trading, 4H to D for swing trading. Configure Inputs: Pivot Length: Adjust (default 5) to control sensitivity to pivot highs/lows. Lower values for faster signals, higher for stronger confirmations. Momentum Threshold: Set the minimum price change (default 0.01%) for signals. Increase for stricter conditions. Take Profit Points: Define TP distance (default 10 points). Adjust based on asset volatility. Signal Filters: Enable/disable filters (momentum, trend, volume, breakout) to match your strategy. Higher/Lower Timeframe: Select timeframes for trend alignment (e.g., 1H for higher, 5M for lower). AI Market Analysis: Enable for predictive trend insights across timeframes. Get Ready Signals: Enable to see pre-signals for potential setups. Interpret Signals: Buy/Sell Labels: Act on green "Buy" or red "Sell" labels, confirming with TP levels and trend direction. Get Ready Labels: Yellow "Get Ready BUY" or orange "Get Ready SELL" indicate potential setups; prepare but wait for confirmation. CHoCH/BOS Lines: Use aqua/lime (CHoCH) and fuchsia/teal (BOS) lines as key support/resistance levels. AI-Trend Matrix: Check the top-right dashboard for trend strength (%), confidence (%), and timeframe-specific trends. AI Market Analysis Table: If enabled, view predictions (▲/▼/—) for each timeframe to anticipate market direction. Trading Tips: Combine signals with other indicators (e.g., RSI, MACD) for additional confirmation. Use higher timeframe trend alignment for higher-probability trades. Adjust TP and signal distance based on asset volatility and trading style. Monitor the AI-Trend Matrix for trend strength; values above 50% or below -50% indicate strong directional bias. Originality PowerHouse SwiftEdge AI v2.10 stands out due to its unique blend of: Adaptive Signal Generation: ATR-based momentum thresholds and CVD-driven volatility context ensure signals remain relevant across market conditions. Multi-Timeframe Synergy: The script’s ability to filter signals based on both higher and lower timeframe trends provides a rare balance of precision and context. AI-Powered Insights: The AI Market Analysis module offers predictive capabilities not commonly found in traditional indicators, simulating institutional-grade analysis. Visual Clarity: The futuristic dashboard and color-coded trendlines make complex data accessible, enhancing usability for all trader levels. Unlike standalone pivot or trend indicators, this script integrates multiple layers of analysis into a cohesive system, reducing false signals and providing actionable insights without requiring external tools or research. Limitations False Signals: No indicator is foolproof; signals may fail in choppy or low-volume markets. Use filters to mitigate. Timeframe Sensitivity: Performance varies by timeframe and asset. Test settings thoroughly. AI Predictions: The AI Market Analysis is based on historical data and simplified scoring; it’s not a guaranteed forecast. Resource Usage: Enabling all filters and AI analysis may slow performance on lower-end devices.
Indicatore Pine Script®
di SwiftEdge
16
SMC+The "SMC+" indicator is a comprehensive tool designed to overlay key Smart Money Concepts (SMC) levels, support/resistance zones, order blocks (OB), fair value gaps (FVG), and trap detection on your TradingView chart. It aims to assist traders in identifying potential areas of interest based on price action, swing structures, and volume dynamics across multiple timeframes. This indicator is fully customizable, allowing users to adjust lookback periods, colors, opacity, and sensitivity to suit their trading style. Key Components and Functionality 1. Key Levels (Support and Resistance) This section plots horizontal lines representing support and resistance levels based on highs and lows over three distinct lookback periods, plus daily nearest levels. Short-Term Lookback Period (Default: 20 bars) Plots the highest high (short_high) and lowest low (short_low) over the specified period. Visualized as dotted lines with customizable colors (Short-Term Resistance Color, Short-Term Support Color) and opacity (Short-Term Resistance Opacity, Short-Term Support Opacity). Adjustment Tip: Increase the lookback (e.g., to 30-50) for less frequent but stronger levels on higher timeframes, or decrease (e.g., to 10-15) for scalping on lower timeframes. Long-Term Lookback Period (Default: 50 bars) Plots broader support (long_low) and resistance (long_high) levels using a solid line style. Customizable via Long-Term Resistance Color, Long-Term Support Color, and their respective opacity settings. Adjustment Tip: Extend to 100-200 bars for swing trading or major trend analysis on daily/weekly charts. Extra-Long Lookback Period (Default: 100 bars) Identifies significant historical highs (extra_long_high) and lows (extra_long_low) with dashed lines. Configurable with Extra-Long Resistance Color, Extra-Long Support Color, and opacity settings. Adjustment Tip: Use 200-500 bars for monthly charts to capture macro-level key zones. Daily Nearest Resistance and Support Levels Dynamically calculates the nearest resistance (daily_res_level) and support (daily_sup_level) based on the current day’s price action relative to historical highs and lows. Displayed with Daily Resistance Color and Daily Support Color (with opacity options). Adjustment Tip: Works best on intraday charts (e.g., 15m, 1h) to track daily pivots; combine with volume profile for confirmation. How It Works: These levels update dynamically as new highs/lows form, providing a visual guide to potential reversal or breakout zones. 2. SMC Inputs (Smart Money Concepts) This section identifies swing structures, order blocks, fair value gaps, and entry signals based on SMC principles. SMC Swing Lookback Period (Default: 12 bars) Defines the period for detecting swing highs (smc_swing_high) and lows (smc_swing_low). Adjustment Tip: Increase to 20-30 for smoother swings on higher timeframes; reduce to 5-10 for faster signals on lower timeframes. Minimum Swing Size (%) (Default: 0.5%) Filters out minor price movements to focus on significant swings. Adjustment Tip: Raise to 1-2% for volatile markets (e.g., crypto) to avoid noise; lower to 0.2-0.3% for forex pairs with tight ranges. Order Block Sensitivity (Default: 1.0) Scales the size of detected order blocks (OBs) for bullish reversal (smc_ob_bull), bearish reversal (smc_ob_bear), and continuation (smc_cont_ob). Visuals include customizable colors, opacity, border thickness, and blinking effects (e.g., SMC Bullish Reversal OB Color, SMC Bearish Reversal OB Blink Thickness). Adjustment Tip: Increase to 1.5-2.0 for wider OBs in choppy markets; keep at 1.0 for precision in trending conditions. Minimum FVG Size (%) (Default: 0.3%) Sets the minimum gap size for Fair Value Gaps (fvg_high, fvg_low), displayed as boxes with Fair Value Gap Color and FVG Opacity. Adjustment Tip: Increase to 0.5-1% for larger, more reliable gaps; decrease to 0.1-0.2% for scalping smaller inefficiencies. How It Works: Bullish Reversal OB: Detects a bearish candle followed by a bullish break, marking a potential demand zone. Bearish Reversal OB: Identifies a bullish candle followed by a bearish break, marking a supply zone. Continuation OB: Spots strong bullish momentum after a prior high, indicating a continuation zone. FVG: Highlights bullish gaps where price may retrace to fill. Entry Signals: Plots triangles (SMC Long Entry) when price retests an OB with a liquidity sweep or break of structure (BOS). 3. Trap Inputs This section detects potential bull and bear traps based on price action, volume, and key level rejections. Min Down Move for Bear Trap (%) (Default: 1.0%) Sets the minimum drop required after a bearish OB to qualify as a trap. Visualized with Bear Trap Color, Bear Trap Opacity, and blinking borders. Adjustment Tip: Increase to 2-3% for stronger traps in trending markets; lower to 0.5% for ranging conditions. Min Up Move for Bull Trap (%) (Default: 1.0%) Sets the minimum rise required after a bullish OB to flag a trap. Customizable with Bull Trap Color, Bull Trap Border Thickness, etc. Adjustment Tip: Adjust similarly to bear traps based on market volatility. Volume Lookback for Traps (Default: 5 bars) Compares current volume to a moving average (avg_volume) to filter low-volume traps. Adjustment Tip: Increase to 10-20 for confirmation on higher timeframes; reduce to 3 for intraday sensitivity. How It Works: Bear Trap: Triggers when price drops significantly after a bearish OB but reverses up with low volume or support rejection. Bull Trap: Activates when price rises after a bullish OB but fails with low volume or resistance rejection. Boxes highlight trap zones, resetting when price breaks out. 4. Visual Customization Line Width (Default: 2) Adjusts thickness of support/resistance lines. Tip: Increase to 3-4 for visibility on cluttered charts. Blink On (Default: Close) Sets whether OB/FVG borders blink based on Open or Close price interaction. Tip: Use "Open" for intraday precision; "Close" for confirmed reactions. Colors and Opacity: Each element (OBs, FVGs, traps, key levels) has customizable colors, opacity (0-100), border thickness (1-5 or 1-7), and blink effects for dynamic visualization. How to Use SMC+ Setup: Apply the indicator to any chart and adjust inputs based on your timeframe and market. Key Levels: Watch for price reactions at short, long, extra-long, or daily levels for potential reversals or breakouts. SMC Signals: Look for entry signals (triangles) near OBs or FVGs, confirmed by liquidity sweeps or BOS. Traps: Avoid false breakouts by monitoring trap boxes, especially near key levels with low volume. Notes: This indicator is a visual aid and does not guarantee trading success. Combine it with other analysis tools and risk management strategies. Performance may vary across markets and timeframes; test settings thoroughly before use. For optimal results, experiment with lookback periods and sensitivity settings to match your trading style. The default settings are optimal for 1 minute and 10 second time frames for small cap low float stocks. Continuation OB are Blue. Bullish Reversal OB color is Green Bearish Reversal OB color is Red FVG color is purple Bear Trap OB is red with a green border and often appears with a Bearish Reversal OB signaling caution to a short position. Bull trap OB is green with a Red border signaling caution to a long position. All active OB area are highlighted and solid in color while other non active OB area are dimmed. My personal favorite setups are when we have an active bullish reversal with an active FVG along with an active Continuation OB. Another personal favorite is the Bearish reversal OB signaling an end to a recent uptrend. The Trap OB detection are also a unique and Original helpful source of information. The OB have a white boarder by default that are colored black giving a simulated blinking effect when price is acting in that zone. The Trap OB border are colored with respect to direction of intended trap, all of which can be customized to personal style. All vaild OB zones are shown compact in size ,a unique and original view until its no longer valid.
Indicatore Pine Script®
di kwsatterfield1
Liquidity Heatmap SwiftEdgeDescription Liquidity Heatmap with Buy/Sell Side (Blue/Red) is a technical analysis tool designed to help traders identify potential liquidity zones in the market by combining swing high/low detection with volume analysis, visualized as a heatmap overlay on the chart. This script highlights areas where significant buying or selling pressure may exist, often acting as support or resistance levels, and provides a clear visual representation of these zones using color-coded heatmap boxes and labeled bubbles. What It Does The script identifies key price levels (swing highs and lows) where liquidity is likely to be concentrated, such as stop-loss clusters or pending orders. These levels are then grouped into a heatmap, with blue zones representing potential buy-side liquidity (below the current price) and red zones indicating sell-side liquidity (above the current price). Each zone is marked with a bubble showing the estimated liquidity amount, derived from volume data, to help traders gauge the strength of the level. How It Works The script combines three main components to create a comprehensive liquidity visualization: Swing Highs and Lows Detection: The script uses the ta.pivothigh and ta.pivotlow functions to identify swing highs and lows over a user-defined lookback period (Swing Length). These levels often represent areas where price has reversed, indicating potential liquidity zones where stop-losses or pending orders may be placed. Volume Analysis: Volume data at each swing high/low is captured and averaged over a specified period (Volume Average Length). This volume is then scaled using a multiplier (Volume Multiplier for Liquidity) to estimate the liquidity amount at each level, displayed in thousands (e.g., "10K") on the chart via labeled bubbles. Heatmap Visualization: The identified levels are grouped into price bins to form a heatmap. The price range is divided into a user-defined number of bins (Number of Heatmap Bins), and each bin is drawn as a colored box (blue for buy-side, red for sell-side). The transparency of the heatmap boxes can be adjusted (Heatmap Transparency) to ensure they do not obscure the price action. Why Combine These Components? The combination of swing highs/lows, volume analysis, and a heatmap provides a powerful way to visualize liquidity in the market. Swing highs and lows are natural points where liquidity tends to accumulate, as they often coincide with areas where traders place stop-losses or pending orders. By incorporating volume data, the script quantifies the potential strength of these levels, giving traders insight into the magnitude of liquidity present. The heatmap visualization then aggregates these levels into a clear, color-coded overlay, making it easy to see where buy-side and sell-side liquidity is concentrated without cluttering the chart. This mashup is particularly useful because it bridges price action (swing levels), market activity (volume), and visual clarity (heatmap), offering a holistic view of potential support and resistance zones that might influence price movements. How to Use It Add the Indicator to Your Chart: Apply the script to your chart by adding it from the Pine Script library. It will overlay directly on your price chart. Interpret the Heatmap: Blue Zones (Buy-Side Liquidity): These appear below the current price and indicate levels where buying pressure or stop-losses from short positions may be located. Red Zones (Sell-Side Liquidity): These appear above the current price and indicate levels where selling pressure or stop-losses from long positions may be located. The intensity of the color is controlled by the Heatmap Transparency setting—lower values make the zones more opaque, while higher values make them more transparent. Analyze the Bubbles: Each liquidity zone is marked with a bubble showing the estimated liquidity amount in thousands (e.g., "10K"). The size of the bubble is scaled by the Bubble Size Multiplier, with larger bubbles indicating higher liquidity. Adjust Settings for Your Needs: Liquidity Settings: Swing Length: Controls the lookback period for detecting swing highs and lows. A smaller value (e.g., 10) is better for shorter timeframes like 1-minute charts, while a larger value (e.g., 50) suits higher timeframes. Liquidity Threshold: Defines how close two levels must be to be considered the same, preventing duplicate zones. Volume Average Length: Sets the period for averaging volume data at swing points. Volume Multiplier for Liquidity: Scales the volume to estimate liquidity amounts shown in the bubbles. Lookback Period (Hours): Limits how far back the script looks for liquidity zones. Use Price Window Filter: If enabled, only shows zones within a price range defined by Liquidity Window (Points per Side). Heatmap Settings: Number of Heatmap Bins: Determines how many price bins the heatmap is divided into. More bins create a finer resolution but may clutter the chart. Heatmap Bin Height (Points): Sets the vertical height of each heatmap box in price points. Heatmap Transparency: Adjusts the transparency of the heatmap boxes (0 = fully opaque, 100 = fully transparent). Display Settings: Bubble Size Multiplier: Scales the size of the bubbles showing liquidity amounts. Trading Application: Use the heatmap to identify potential support (blue zones) and resistance (red zones) levels where price may react. Pay attention to zones with larger bubbles, as they indicate higher liquidity and may have a stronger impact on price. Combine with other analysis tools (e.g., trendlines, indicators) to confirm trade setups. What Makes It Original? This script stands out by integrating swing high/low detection with volume-based liquidity estimation and a heatmap visualization in a single tool. Unlike traditional support/resistance indicators that only plot static lines, this script dynamically aggregates liquidity zones into a heatmap, making it easier to see clusters of potential buying or selling pressure. The addition of volume-derived liquidity amounts in labeled bubbles provides a unique quantitative measure of each zone's strength, helping traders prioritize key levels. The color-coded buy/sell distinction further enhances its utility by visually separating zones based on their likely market impact. Example Use Case On a 1-minute chart of EUR/USD, you might set Swing Length to 10 to capture short-term pivots, Lookback Period (Hours) to 4 to focus on recent data, and Liquidity Window to 200 points (20 pips) to show only nearby zones. The heatmap will then display blue zones below the current price where buy-side liquidity may act as support, and red zones above where sell-side liquidity may act as resistance. A bubble showing "50K" at a blue zone indicates significant buy-side liquidity, suggesting a potential bounce if the price approaches that level.
Indicatore Pine Script®
di SwiftEdge
5
Pivot S/R with Volatility Filter## *📌 Indicator Purpose* This indicator identifies *key support/resistance levels* using pivot points while also: ✅ Detecting *high-volume liquidity traps* (stop hunts) ✅ Filtering insignificant pivots via *ATR (Average True Range) volatility* ✅ Tracking *test counts and breakouts* to measure level strength --- ## *⚙ SETTINGS – Detailed Breakdown* ### *1️⃣ ◆ General Settings* #### *🔹 Pivot Length* - *Purpose:* Determines how many bars to analyze when identifying pivots. - *Usage:* - *Low values (5-20):* More pivots, better for scalping. - *High values (50-200):* Fewer but stronger levels for swing trading. - *Example:* - Pivot Length = 50 → Only the most significant highs/lows over 50 bars are marked. #### *🔹 Test Threshold (Max Test Count)* - *Purpose:* Sets how many times a level can be tested before being invalidated. - *Example:* - Test Threshold = 3 → After 3 tests, the level is ignored (likely to break). #### *🔹 Zone Range* - *Purpose:* Creates a price buffer around pivots (±0.001 by default). - *Why?* Markets often respect "zones" rather than exact prices. --- ### *2️⃣ ◆ Volatility Filter (ATR)* #### *🔹 ATR Period* - *Purpose:* Smoothing period for Average True Range calculation. - *Default:* 14 (standard for volatility measurement). #### *🔹 ATR Multiplier (Min Move)* - *Purpose:* Requires pivots to show *meaningful price movement*. - *Formula:* Min Move = ATR × Multiplier - *Example:* - ATR = 10 pips, Multiplier = 1.5 → Only pivots with *15+ pip swings* are valid. #### *🔹 Show ATR Filter Info* - Displays current ATR and minimum move requirements on the chart. --- ### *3️⃣ ◆ Volume Analysis* #### *🔹 Volume Change Threshold (%)* - *Purpose:* Filters for *unusual volume spikes* (institutional activity). - *Example:* - Threshold = 1.2 → Requires *120% of average volume* to confirm signals. #### *🔹 Volume MA Period* - *Purpose:* Lookback period for "normal" volume calculation. --- ### *4️⃣ ◆ Wick Analysis* #### *🔹 Wick Length Threshold (Ratio)* - *Purpose:* Ensures rejection candles have *long wicks* (strong reversals). - *Formula:* Wick Ratio = (Upper Wick + Lower Wick) / Candle Range - *Example:* - Threshold = 0.6 → 60% of the candle must be wicks. #### *🔹 Min Wick Size (ATR %)* - *Purpose:* Filters out small wicks in volatile markets. - *Example:* - ATR = 20 pips, MinWickSize = 1% → Wicks under *0.2 pips* are ignored. --- ### *5️⃣ ◆ Display Settings* - *Show Zones:* Toggles support/resistance shaded areas. - *Show Traps:* Highlights liquidity traps (▲/▼ symbols). - *Show Tests:* Displays how many times levels were tested. - *Zone Transparency:* Adjusts opacity of zones. --- ## *🎯 Practical Use Cases* ### *1️⃣ Liquidity Trap Detection* - *Scenario:* Price spikes *above resistance* then reverses sharply. - *Requirements:* - Long wick (Wick Ratio > 0.6) - High volume (Volume > Threshold) - *Outcome:* *Short Trap* signal (▼) appears. ### *2️⃣ Strong Support Level* - *Scenario:* Price bounces *3 times* from the same level. - *Indicator Action:* - Labels the level with test count (3/5 = 3 tests out of max 5). - Turns *red* if broken (Break Count > 0). Deep Dive: How This Indicator Works* This indicator combines *four professional trading concepts* into one powerful tool: 1. *Classic Pivot Point Theory* - Identifies swing highs/lows where price previously reversed - Unlike basic pivot indicators, ours uses *confirmed pivots only* (filtered by ATR) 2. *Volume-Weighted Validation* - Requires unusual trading volume to confirm levels - Filters out "phantom" levels with low participation 3. *ATR Volatility Filtering* - Eliminates insignificant price swings in choppy markets - Ensures only meaningful levels are plotted 4. *Liquidity Trap Detection* - Spots institutional stop hunts where markets fake out traders - Uses wick analysis + volume spikes for high-probability signals --- Deep Dive: How This Indicator Works* This indicator combines *four professional trading concepts* into one powerful tool: 1. *Classic Pivot Point Theory* - Identifies swing highs/lows where price previously reversed - Unlike basic pivot indicators, ours uses *confirmed pivots only* (filtered by ATR) 2. *Volume-Weighted Validation* - Requires unusual trading volume to confirm levels - Filters out "phantom" levels with low participation 3. *ATR Volatility Filtering* - Eliminates insignificant price swings in choppy markets - Ensures only meaningful levels are plotted 4. *Liquidity Trap Detection* - Spots institutional stop hunts where markets fake out traders - Uses wick analysis + volume spikes for high-probability signals --- ## *📊 Parameter Encyclopedia (Expanded)* ### *1️⃣ Pivot Engine Settings* #### *Pivot Length (50)* - *What It Does:* Determines how many bars to analyze when searching for swing highs/lows. - *Professional Adjustment Guide:* | Trading Style | Recommended Value | Why? | |--------------|------------------|------| | Scalping | 10-20 | Captures short-term levels | | Day Trading | 30-50 | Balanced approach | | Swing Trading| 50-200 | Focuses on major levels | - *Real Market Example:* On NASDAQ 5-minute chart: - Length=20: Identifies levels holding for ~2 hours - Length=50: Finds levels respected for entire trading day #### *Test Threshold (5)* - *Advanced Insight:* Institutions often test levels 3-5 times before breaking them. This setting mimics the "probe and push" strategy used by smart money. - *Psychology Behind It:* Retail traders typically give up after 2-3 tests, while institutions keep testing until stops are run. --- ### *2️⃣ Volatility Filter System* #### *ATR Multiplier (1.0)* - *Professional Formula:* Minimum Valid Swing = ATR(14) × Multiplier - *Market-Specific Recommendations:* | Market Type | Optimal Multiplier | |------------------|--------------------| | Forex Majors | 0.8-1.2 | | Crypto (BTC/ETH) | 1.5-2.5 | | SP500 Stocks | 1.0-1.5 | - *Why It Matters:* In EUR/USD (ATR=10 pips): - Multiplier=1.0 → Requires 10 pip swings - Multiplier=1.5 → Requires 15 pip swings (fewer but higher quality levels) --- ### *3️⃣ Volume Confirmation System* #### *Volume Threshold (1.2)* - *Institutional Benchmark:* - 1.2x = Moderate institutional interest - 1.5x+ = Strong smart money activity - *Volume Spike Case Study:* *Before Apple Earnings:* - Normal volume: 2M shares - Spike threshold (1.2): 2.4M shares - Actual volume: 3.1M shares → STRONG confirmation --- ### *4️⃣ Liquidity Trap Detection* #### *Wick Analysis System* - *Two-Filter Verification:* 1. *Wick Ratio (0.6):* - Ensures majority of candle shows rejection - Formula: (UpperWick + LowerWick) / Total Range > 0.6 2. *Min Wick Size (1% ATR):* - Prevents false signals in flat markets - Example: ATR=20 pips → Min wick=0.2 pips - *Trap Identification Flowchart:* Price Enters Zone → Spikes Beyond Level → Shows Long Wick → Volume > Threshold → TRAP CONFIRMED --- ## *💡 Master-Level Usage Techniques* ### *Institutional Order Flow Analysis* 1. *Step 1:* Identify pivot levels with ≥3 tests 2. *Step 2:* Watch for volume contraction near levels 3. *Step 3:* Enter when trap signal appears with: - Wick > 2×ATR - Volume > 1.5× average ### *Multi-Timeframe Confirmation* 1. *Higher TF:* Find weekly/monthly pivots 2. *Lower TF:* Use this indicator for precise entries 3. *Example:* - Weekly pivot at $180 - 4H shows liquidity trap → High-probability reversal --- ## *⚠ Critical Mistakes to Avoid* 1. *Using Default Settings Everywhere* - Crude oil needs higher ATR multiplier than bonds 2. *Ignoring Trap Context* - Traps work best at: - All-time highs/lows - Major psychological numbers (00/50 levels) 3. *Overlooking Cumulative Volume* - Check if volume is building over multiple tests
Indicatore Pine Script®
di doganayy2
SessionRangeLevels_v0.1SessionRangeLevels_v0.1 Overview: SessionRangeLevels_v0.1 is a customizable Pine Script (v6) indicator designed to plot key price levels based on a user-defined trading session. It identifies the high and low of the session and calculates intermediate levels (75%, 50% "EQ", and 25%) within that range. These levels are projected forward as horizontal lines with accompanying labels, providing traders with dynamic support and resistance zones. The indicator supports extensive customization for session timing, time zones, line styles, colors, and more. Key Features: Session-Based Range Detection: Tracks the high and low prices during a specified session (e.g., 0600-0900) and updates them dynamically as the session progresses. Customizable Levels: Displays High, 75%, EQ (50%), 25%, and Low levels, each with independent toggle options, styles (Solid, Dashed, Dotted), colors, and widths. Session Anchor: Optional vertical line marking the session start, with customizable style, color, and width. Projection Offset: Extends level lines forward by a user-defined number of bars (default: 24) for future price reference. Labels: Toggleable labels for each level (e.g., "High," "75%," "EQ") with adjustable size (Tiny, Small, Normal, Large). Time Zone Support: Aligns session timing to a selected time zone (e.g., America/New_York, UTC, Asia/Tokyo, etc.). Alert Conditions: Triggers alerts when the price crosses any of the plotted levels (High, 75%, EQ, 25%, Low). Inputs: Session Time (HHMM-HHMM): Define the session range (e.g., "0600-0900" for 6:00 AM to 9:00 AM). Time Zone: Choose from options like UTC, America/New_York, Europe/London, etc. Anchor Settings: Toggle the session start line, adjust its style (default: Dotted), color (default: Black), and width (default: 1). Level Settings: High (Solid, Black, Width 2) 75% (Dotted, Blue, Width 1) EQ/50% (Dotted, Orange, Width 1) 25% (Dotted, Blue, Width 1) Low (Solid, Black, Width 2) Each level includes options to show/hide, set style, color, width, and label visibility. Projection Offset: Number of bars to extend lines (default: 24). Label Size: Set label size (default: Small). How It Works: The indicator detects the start and end of the user-defined session based on the specified time and time zone. During the session, it tracks the highest high and lowest low, updating the levels in real-time. At the session start, it plots the High, Low, and intermediate levels (75%, 50%, 25%), projecting them forward. Lines and labels dynamically adjust as new highs or lows occur within the session. Alerts notify users when the price crosses any active level. Usage: Ideal for traders who focus on session-based strategies (e.g., London or New York open). Use it to identify key price zones, monitor breakouts, or set targets. Customize the appearance to suit your chart preferences and enable alerts for real-time trading signals. Notes: Ensure your chart’s timeframe aligns with your session duration for optimal results (e.g., 1-minute or 5-minute charts for short sessions). The indicator overlays directly on the price chart for easy integration with other tools.
Indicatore Pine Script®
di dc_77
Advanced Session Profile Predictor with SR Boxes & ORAdvanced Session Profile Predictor with Momentum Arrows Designed for intraday traders, this indicator analyzes price action across Asia, London, and New York sessions to predict market profiles and highlight key trading opportunities. By combining session-based profiling, Opening Range (OR) visualization, and momentum signals from Traders Dynamic Index (TDI), it offers a unique tool for anticipating trends, reversals, and breakouts. Ideal for forex, indices, and crypto on 15M–1H charts. What Makes This Indicator Unique? Unlike typical session indicators that only mark time zones or standard TDI scripts that focus on momentum, this tool: Predicts market profiles (e.g., "Trend Continuation," "NY Manipulation") by analyzing session ranges and directional moves, offering actionable insights into how sessions interact. Visualizes Opening Range (OR) boxes for the first 15 minutes of each session, helping traders spot early breakout levels. Integrates TDI with momentum to generate precise bullish/bearish arrows, filtered by session context for improved reliability. Simplifies decision-making with dynamic profile labels showing real-time long/short conditions based on price levels. How Does It Work? Session Tracking: Asia (00:00–08:00 UTC, yellow), London (08:00–16:00 UTC, red), and New York (13:00–21:00 UTC, blue) sessions are highlighted with background colors and high/low lines (crosses). OR boxes (first 15 minutes) are drawn for each session: yellow for Asia, red for London, blue for NY. Profile Prediction: Compares Asia and London session ranges and directions (e.g., trending if range > 1.5x 5-period SMA). Examples: Trend Continuation: Asia and London trend in the same direction—long above Asia high (uptrend) or short below Asia low (downtrend). NY Manipulation: Asia trends, London consolidates—watch for NY breakouts at London high/low. Displays the predicted profile and entry conditions in labels (e.g., "IF price hits 1.2000 LONG"). Momentum Arrows: Uses TDI (RSI period 21, bands 34, fast MA 2) and 12-period momentum. Green up arrow: Fast MA > upper band (>68) and momentum rising (bullish). Red down arrow: Fast MA < lower band (<32) and momentum falling (bearish). Support/Resistance (SR): Plots dynamic SR boxes based on pivot highs/lows, filtered by volume (inspired by ChartPrime’s methodology, credited below). How to Use It Setup: Apply to a 15M–1H chart. Adjust time zone (default: UTC) and session times if needed. Customize TDI/momentum settings for sensitivity. Trading: Check the top-right labels for the current profile and entry conditions (e.g., "IF price hits LONG/SHORT"). Confirm entries with green up arrows (bullish) or red down arrows (bearish). Use OR boxes and session high/low lines to identify breakout or reversal levels. Example: In "NY Manipulation," wait for price to hit London high (long) or low (short) during NY session, confirmed by an arrow. Best Markets: Forex (EUR/USD), indices (SPX500), crypto (BTC/USD) with sufficient intraday volatility. Underlying Concepts Session Profiling: Detects trends (range > SMA * threshold) and manipulation (e.g., London breaking Asia’s high/low) to predict NY behavior. OR Boxes: Marks the first 15 minutes’ high/low as a breakout zone (time-based, 900,000 ms). TDI + Momentum: Combines RSI-based bands with price change (close – close ) for momentum signals. SR Boxes: Identifies pivots over a lookback period (default 20), scaled by ATR and filtered by volume thresholds. Credits The SR box logic is inspired by ChartPrime’s volume-filtered support/resistance methodology, adapted with custom breakout/hold detection. Original authors are credited for their foundational work. Chart Setup Displays session backgrounds, OR boxes, high/low lines, TDI arrows, and profile labels. Keep other indicators off for clarity.
Indicatore Pine Script®
di SwiftEdge
VWAP Horizon Suite Optimized - CoffeeKillerVWAP Horizon Suite Optimized - User Guide Overview The VWAP Horizon Suite Optimized is a comprehensive technical analysis tool for TradingView designed to enhance your trading strategy with Volume Weighted Average Price (VWAP) analysis, standard deviation bands, and customizable Exponential Moving Averages (EMAs). This indicator provides a robust framework for identifying potential support and resistance levels, price momentum, and market trends. Key Features - **Daily VWAP with Session Reset**: Automatically resets at 17:00 (5:00 PM) each day - **Customizable Standard Deviation/Percentage Bands**: Up to 3 bands above and below VWAP - **High/Low Point Detection**: Visual markers for significant price levels - **Multiple Customizable EMAs**: 8 different EMAs that can be individually toggled and styled - **Visual Customization**: Adjustable colors, fills, and styles for all elements VWAP Settings - **Source**: Determines the price data used to calculate VWAP (default: HLC3 - High, Low, Close average) Bands Settings - **Bands Calculation Mode**: Choose between "Standard Deviation" or "Percentage" methods - **Show Band #1, #2, #3**: Toggle visibility for each band - **Band Multiplier #1, #2, #3**: Adjust the distance from VWAP (in standard deviations or percentage) - **Show Fills**: Enable colored fills between bands for better visualization Visualization Settings - **Show High/Low Markers**: Display diamond markers for local high and low points relative to VWAP, these reset based on the price crossing the VWAP Line. EMA Settings The indicator provides 8 customizable EMAs (8, 13, 21, 26, 48, 50, 100, and 200) with individual controls: - **Show EMA X**: Toggle visibility for each EMA - **EMA X Period**: Adjust the period length for calculation - **EMA X Color**: Customize the color of each EMA - **EMA Line Width**: Set the width for all EMA lines How to Use Basic VWAP Analysis The core VWAP line (blue) represents the average price weighted by volume since the start of the session (17:00 daily reset). This serves as a dynamic support/resistance level and reference point for intraday trading. 1. **Price above VWAP**: Generally bullish short-term sentiment 2. **Price below VWAP**: Generally bearish short-term sentiment 3. **Crosses of VWAP**: Potential shift in short-term momentum Standard Deviation Bands The bands surrounding VWAP help identify potential support, resistance, and volatility levels: - **Band #1 (±1σ)**: Price often reverts to VWAP when reaching these levels - **Band #2 (±2σ)**: Stronger support/resistance areas, possible reversal zones - **Band #3 (±3σ)**: Extreme price levels, often indicating overbought/oversold conditions High/Low Point Detection Purple and yellow diamond markers identify significant swing highs and lows relative to VWAP, helping you recognize potential reversal points or continuation patterns. (These repaint in a effort to find the max high/low point from the VWAP Line) EMA Strategy The customizable EMAs can be used to: - Find potential support/resistance levels - Create crossover systems - Analyze market structure Common EMA combinations include: - 8 & 21 for short-term trends - 50 & 200 for long-term trends and the "Golden Cross/Death Cross" - 13 & 48 for the "New Golden Cross" - a modern alternative gaining popularity among traders - 8, 13, 21 for complex short-term momentum analysis Advanced Usage Tips For Day Traders 1. **Opening Range Analysis**: Watch how price reacts to VWAP in the first hour of trading 2. **VWAP Reversions**: Look for trades when price touches outer bands and reverses toward VWAP 3. **Band Breakouts**: Strong moves beyond Band #2 may indicate momentum for continuation For Swing Traders 1. **Use alongside daily/weekly support-resistance levels** 2. **Combine with EMA crossovers for trend confirmation** 3. **Identify potential reversal zones where price reaches Band #3** Combined Strategies - **EMA + VWAP Confluence**: Strong signals occur when EMA lines and VWAP/bands align at the same price level - **High/Low + Band Touch**: When a high/low marker appears near a band, it may indicate a stronger support/resistance level Conclusion The VWAP Horizon Suite Optimized provides a comprehensive set of tools for price analysis based on volume-weighted data and exponential averages. By understanding and properly configuring the various components, you can create a powerful visual framework for identifying potential trading opportunities across multiple timeframes. Remember that no indicator provides perfect signals, and the VWAP Horizon Suite works best when used as part of a complete trading strategy that includes risk management, multiple confirmation tools, and proper analysis of market conditions. DISCLAIMER **DISCLAIMER: This indicator and its signals are intended solely for educational and informational purposes. They do not constitute financial advice. Trading involves significant risk of loss. Always conduct your own analysis and consult with financial professionals before making trading decisions.**
Indicatore Pine Script®
di CoffeeKiller
6
Double Top/Bottom Fractals DetectorDouble Top/Bottom Detector with Williams Fractals (Extended + Early Signal) This indicator combines the classic Williams Fractals methodology with an enhanced mechanism to detect potential reversal patterns—namely, double tops and double bottoms. It does so by using two separate detection schemes: Confirmed Fractals for Pattern Formation: The indicator calculates confirmed fractals using the traditional Williams Fractals rules. A fractal is confirmed if a bar’s high (for an up fractal) or low (for a down fractal) is the highest or lowest compared to a specified number of bars on both sides (default: 2 bars on the left and 2 on the right). Once a confirmed fractal is identified, its price (high for tops, low for bottoms) and bar index are stored in an internal array (up to the 10 most recent confirmed fractals). When a new confirmed fractal appears, the indicator compares it with previous confirmed fractals. If the new fractal is within a user-defined maximum bar distance (e.g., 20 bars) and the price difference is within a specified tolerance (default: 0.8%), the indicator assumes that a double top (if comparing highs) or a double bottom (if comparing lows) pattern is forming. A signal is then generated by placing a label on the chart—SELL for a double top and BUY for a double bottom. Early Signal Generation: To capture potential reversals sooner, the indicator also includes an “early signal” mechanism. This uses asymmetric offsets different from the confirmed fractal calculation: Signal Right Offset: Defines the candidate bar used for early signal detection (default is 1 bar). Signal Left Offset: Defines the number of bars to the left of the candidate that must confirm the candidate’s price is the extreme (default is 2 bars). For an early top candidate, the candidate bar’s high must be greater than the highs of the bars specified by the left offset and also higher than the bar immediately to its right. For an early bottom candidate, the corresponding condition applies for lows. If the early candidate’s price level is within the acceptable tolerance when compared to any of the previously stored confirmed fractals (again, within the allowed bar distance), an early signal is generated—displayed as SELL_EARLY or BUY_EARLY. The early signal block can be enabled or disabled via a checkbox input, allowing traders to choose whether to use these proactive signals. Key Parameters: n: The number of bars used to confirm a fractal. The fractal is considered valid if the bar’s high (or low) is higher (or lower) than the highs (or lows) of the preceding and following n bars. maxBarsApart: The maximum number of bars allowed between two fractals for them to be considered part of the same double top or bottom pattern. tolerancePercent: The maximum allowed percentage difference (default: 0.8%) between the high (or low) values of two fractals to qualify them as matching for the pattern. signalLeftOffset & signalRightOffset: These parameters define the asymmetric offsets for early signal detection. The left offset (default: 2) specifies how many bars to look back, while the right offset (default: 1) specifies the candidate bar’s position. earlySignalsEnabled: A checkbox option that allows users to enable or disable early signal generation. When disabled, the indicator only uses confirmed fractal signals. How It Works: Fractal Calculation and Plotting: The confirmed fractals are calculated using the traditional method, ensuring robust identification by verifying the pattern with a symmetrical offset. These confirmed fractals are plotted on the chart using triangle shapes (upwards for potential double bottoms and downwards for potential double tops). Pattern Detection: Upon detection of a new confirmed fractal, the indicator checks up to 10 previous fractals stored in internal arrays. If the new fractal’s high or low is within the tolerance range and close enough in terms of bars to one of the stored fractals, it signifies the formation of a double top or double bottom. A corresponding SELL or BUY label is then placed on the chart. Early Signal Feature: If enabled, the early signal block checks for candidate bars based on the defined asymmetric offsets. These candidates are evaluated to see if their high/low levels meet the early confirmation criteria relative to nearby bars. If they also match one of the confirmed fractal levels (within tolerance and bar distance), an early signal is issued with a label (SELL_EARLY or BUY_EARLY) on the chart. Benefits for Traders: Timely Alerts: By combining both confirmed and early signals, the indicator offers a proactive approach to detect reversals sooner, potentially improving entry and exit timing. Flexibility: With adjustable parameters (including the option to disable early signals), traders can fine-tune the indicator to better suit different markets, timeframes, and trading styles. Enhanced Pattern Recognition: The dual-layered approach (confirmed fractals plus early detection) helps filter out false signals and captures the essential formation of double tops and bottoms more reliably.
Indicatore Pine Script®
di RezzoRedPriest
1
Gann & Fibonacci Analysis for MSTRYes! Below is a step-by-step guide to performing Gann Analysis on MSTR in TradingView for the last year. Step 1: Set Up the Chart Open TradingView and search for MSTR (MicroStrategy). Select the 1-day (D) timeframe to analyze the past year. Set your chart to logarithmic scale (⚙ Settings → Scale → Log). Enable grid lines for alignment (⚙ Settings → Appearance → Grid Lines). Step 2: Identify Key Highs and Lows (Last Year) Find the 52-week high and 52-week low for MSTR. As of now: 52-Week High: ~$999 (March 2024). 52-Week Low: ~$280 (October 2023). Step 3: Plot Gann Angles Using TradingView's Gann Fan Tool: Select "Gann Fan" (Press / and type “Gann Fan” to find it). Start at the 52-week low (~$280, October 2023) and drag upwards. Adjust the angles to match key levels: 1x1 (45°) → Main trendline 2x1 (26.5°) → Strong uptrend 4x1 (15°) → Weak trendline 1x2 (63.75°) → Strong resistance Repeat the process from the 52-week high (~$999, March 2024) downward to see bearish angles. Step 4: Apply Fibonacci & Gann Retracement Levels Using Fibonacci Retracement: Select "Fibonacci Retracement" tool. Draw from 52-week high ($999) to 52-week low ($280). Enable key Fibonacci levels: 23.6% ($816) 38.2% ($678) 50% ($640) 61.8% ($550) 78.6% ($430) Watch for price reactions near these levels. Using Gann Retracement Levels: Select "Gann Box" in TradingView. Draw from 52-week high ($999) to low ($280). Enable key Gann retracement levels: 12.5% ($912) 25% ($850) 37.5% ($768) 50% ($640) 62.5% ($550) 75% ($480) 87.5% ($350) Identify confluences with Gann angles and Fibonacci levels. Step 5: Identify Significant Dates & Time Cycles Use "Date Range" Tool in TradingView. Mark major turning points: High → Low: ~180 days (Half-year cycle). Low → High: ~90 days (Quarter cycle). Use Square-Outs (Time = Price method): Example: If MSTR hit $500, check 500 days from key events. Mark key anniversaries of past highs/lows for possible reversals. Step 6: Analyze and Trade Execution ✅ If MSTR is at a Gann angle + Fibonacci level + key date → Expect a reaction. ✅ Use RSI, MACD, and Volume for extra confirmation. ✅ Set Stop-Loss at nearest Gann support/resistance.
Indicatore Pine Script®
di zkissing
SSL Channel MTFSSL Channel with MTF support, This eliminates the noise of a basic SSL Channel script which is based on ErwinBeckers SSL Channel. So i have used a Multi Time Frame approach to have a clear confirmation of trend and reduce Noise and False signals unlike basic SSL Channel. This script can be used to determine. Support/Resistance High/Low Breakout Trend Direction MA candles for Entry The high and low sma are plotted as SSL CHANNEL when ever the high and low sma cross each other a direction change is observed. The direction of SSL channel determines the trend of the price. The length of the channel can be changed as required a low value has a high noise and direction can be determined with low accuracy. Increasing the length of SSL channel has high accuracy trend confirmation. The MTF SSL Channel uses plot from higher timeframe this helps in using SSL Channel as a Price Action Tool. Price when ever crosses over or below the channel determines a breakout. Price tries to move between the High SMA line and Low SMA Line of the SSL Channel rejection, breakouts can be easily observed on a lower timeframe using SSL Channel Plot from a higher timeframe. I have used 5min/15min chart with MTF SSL from a 1Hr/4Hr and a length of 5 instead of 10. This helps quick direction changes over a period of 1hr to 4hr. Price is trapped within the High SMA and Low SMA lines of SSL Channel. In addition to SSL High Low and average mid line is plotted to additional reference. Buy Sell Signals are plotted based on crossover of SMA High and Low. Candle are Plotted Using a SMA with length of 5. This Candle Plot can be used to make an entry based on direction confirmation of SSL. keep in mind the direction of SSL Plot and the candle must be same. Preferably Entry can made above or below the midline of SSL Channel. The Candle Plot eliminates the Noise of traditional Japanese Candlesticks. Additionally MACD Crossover and MACD Trend line confirmations can be used to confirm a Buy Sell and Entry signals Alerts are also plotted accordingly.
Indicatore Pine Script®
di traderharikrishna
9
6 Band Parametric EQThis indicator implements a complete parametric equalizer on any data source using high-pass and low-pass filters, high and low shelving filters, and six fully configurable bell filters. Each filter stage features standard audio DSP controls including frequency, Q factor, and gain where applicable. While parametric EQ is typically used for audio processing, this implementation raises questions about the nature of filtering in technical analysis. Why stop at simple moving averages when you can shape your signal's frequency response with surgical precision? The answer may reveal more about our assumptions than our indicators. Filter Types and Parameters High-Pass Filter: A high-pass filter attenuates frequency components below its cutoff frequency while passing higher frequencies. The Q parameter controls resonance at the cutoff point, with higher values creating more pronounced peaks. Low-Pass Filter: The low-pass filter does the opposite - it attenuates frequencies above the cutoff while passing lower frequencies. Like the high-pass, its Q parameter affects the resonance at the cutoff frequency. High/Low Shelf Filters: Shelf filters boost or cut all frequencies above (high shelf) or below (low shelf) the target frequency. The slope parameter determines the steepness of the transition around the target frequency , with a value of 1.0 creating a gentle slope and lower values making the transition more abrupt. The gain parameter sets the amount of boost or cut in decibels. Bell Filters: Bell (or peaking) filters create a boost or cut centered around a specific frequency. A bell filter's frequency parameter determines the center point of the effect, while Q controls the width of the affected frequency range - higher Q values create a narrower bandwidth. The gain parameter defines the amount of boost or cut in decibels. All filters run in series, processing the signal in this order: high-pass → low shelf → bell filters → high shelf → low-pass. Each stage can be independently enabled or bypassed. The frequency parameter for all filters represents the period length of the targeted frequency component. Lower values target higher frequencies and vice versa. All gain values are in decibels, where positive values boost and negative values cut. The 6-Band Parametric EQ combines these filters into a comprehensive frequency shaping tool. Just as audio engineers use parametric EQs to sculpt sound, this indicator lets you shape market data's frequency components with surgical precision. But beyond its technical implementation, this indicator serves as a thought experiment about the nature of filtering in technical analysis. While traditional indicators often rely on simple moving averages or single-frequency filters, the parametric EQ takes this concept to its logical extreme - offering complete control over the frequency domain of price action. Whether this level of filtering precision is useful for analysis is perhaps less important than what it reveals about our assumptions regarding market data and its frequency components.
Indicatore Pine Script®
di The_Peaceful_Lizard
6
Bullish Reversal Bar Strategy [Skyrexio]Overview Bullish Reversal Bar Strategy leverages the combination of candlestick pattern Bullish Reversal Bar (description in Methodology and Justification of Methodology), Williams Alligator indicator and Williams Fractals to create the high probability setups. Candlestick pattern is used for the entering into trade, while the combination of Williams Alligator and Fractals is used for the trend approximation as close condition. Strategy uses only long trades. Unique Features No fixed stop-loss and take profit: Instead of fixed stop-loss level strategy utilizes technical condition obtained by Fractals and Alligator or the candlestick pattern invalidation to identify when current uptrend is likely to be over (more information in "Methodology" and "Justification of Methodology" paragraphs) Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Trend Trade Filter: strategy uses Alligator and Fractal combination as high probability trend filter. Methodology The strategy opens long trade when the following price met the conditions: 1.Current candle's high shall be below the Williams Alligator's lines (Jaw, Lips, Teeth)(all details in "Justification of Methodology" paragraph) 2.Price shall create the candlestick pattern "Bullish Reversal Bar". Optionally if MFI and AO filters are enabled current candle shall have the decreasing AO and at least one of three recent bars shall have the squat state on the MFI (all details in "Justification of Methodology" paragraph) 3.If price breaks through the high of the candle marked as the "Bullish Reversal Bar" the long trade is open at the price one tick above the candle's high 4.Initial stop loss is placed at the Bullish Reversal Bar's candle's low 5.If price hit the Bullish Reversal Bar's low before hitting the entry price potential trade is cancelled 6.If trade is active and initial stop loss has not been hit, trade is closed when the combination of Alligator and Williams Fractals shall consider current trend change from upward to downward. Strategy settings In the inputs window user can setup strategy setting: Enable MFI (if true trades are filtered using Market Facilitation Index (MFI) condition all details in "Justification of Methodology" paragraph), by default = false) Enable AO (if true trades are filtered using Awesome Oscillator (AO) condition all details in "Justification of Methodology" paragraph), by default = false) Justification of Methodology Let's explore the key concepts of this strategy and understand how they work together. The first and key concept is the Bullish Reversal Bar candlestick pattern. This is just the single bar pattern. The rules are simple: Candle shall be closed in it's upper half High of this candle shall be below all three Alligator's lines (Jaw, Lips, Teeth) Next, let’s discuss the short-term trend filter, which combines the Williams Alligator and Williams Fractals. Williams Alligator Developed by Bill Williams, the Alligator is a technical indicator that identifies trends and potential market reversals. It consists of three smoothed moving averages: Jaw (Blue Line): The slowest of the three, based on a 13-period smoothed moving average shifted 8 bars ahead. Teeth (Red Line): The medium-speed line, derived from an 8-period smoothed moving average shifted 5 bars forward. Lips (Green Line): The fastest line, calculated using a 5-period smoothed moving average shifted 3 bars forward. When the lines diverge and align in order, the "Alligator" is "awake," signaling a strong trend. When the lines overlap or intertwine, the "Alligator" is "asleep," indicating a range-bound or sideways market. This indicator helps traders determine when to enter or avoid trades. Fractals, another tool by Bill Williams, help identify potential reversal points on a price chart. A fractal forms over at least five consecutive bars, with the middle bar showing either: Up Fractal: Occurs when the middle bar has a higher high than the two preceding and two following bars, suggesting a potential downward reversal. Down Fractal: Happens when the middle bar shows a lower low than the surrounding two bars, hinting at a possible upward reversal. Traders often use fractals alongside other indicators to confirm trends or reversals, enhancing decision-making accuracy. How do these tools work together in this strategy? Let’s consider an example of an uptrend. When the price breaks above an up fractal, it signals a potential bullish trend. This occurs because the up fractal represents a shift in market behavior, where a temporary high was formed due to selling pressure. If the price revisits this level and breaks through, it suggests the market sentiment has turned bullish. The breakout must occur above the Alligator’s teeth line to confirm the trend. A breakout below the teeth is considered invalid, and the downtrend might still persist. Conversely, in a downtrend, the same logic applies with down fractals. How we can use all these indicators in this strategy? This strategy is a counter trend one. Candle's high shall be below all Alligator's lines. During this market stage the bullish reversal bar candlestick pattern shall be printed. This bar during the downtrend is a high probability setup for the potential reversal to the upside: bulls were able to close the price in the upper half of a candle. The breaking of its high is a high probability signal that trend change is confirmed and script opens long trade. If market continues going down and break down the bullish reversal bar's low potential trend change has been invalidated and strategy close long trade. If market really reversed and started moving to the upside strategy waits for the trend change form the downtrend to the uptrend according to approximation of Alligator and Fractals combination. If this change happens strategy close the trade. This approach helps to stay in the long trade while the uptrend continuation is likely and close it if there is a high probability of the uptrend finish. Optionally users can enable MFI and AO filters. First of all, let's briefly explain what are these two indicators. The Awesome Oscillator (AO), created by Bill Williams, is a momentum-based indicator that evaluates market momentum by comparing recent price activity to a broader historical context. It assists traders in identifying potential trend reversals and gauging trend strength. AO = SMA5(Median Price) − SMA34(Median Price) where: Median Price = (High + Low) / 2 SMA5 = 5-period Simple Moving Average of the Median Price SMA 34 = 34-period Simple Moving Average of the Median Price This indicator is filtering signals in the following way: if current AO bar is decreasing this candle can be interpreted as a bullish reversal bar. This logic is applicable because initially this strategy is a trend reversal, it is searching for the high probability setup against the current trend. Decreasing AO is the additional high probability filter of a downtrend. Let's briefly look what is MFI. The Market Facilitation Index (MFI) is a technical indicator that measures the price movement per unit of volume, helping traders gauge the efficiency of price movement in relation to trading volume. Here's how you can calculate it: MFI = (High−Low)/Volume MFI can be used in combination with volume, so we can divide 4 states. Bill Williams introduced these to help traders interpret the interaction between volume and price movement. Here’s a quick summary: Green Window (Increased MFI & Increased Volume): Indicates strong momentum with both price and volume increasing. Often a sign of trend continuation, as both buying and selling interest are rising. Fake Window (Increased MFI & Decreased Volume): Shows that price is moving but with lower volume, suggesting weak support for the trend. This can signal a potential end of the current trend. Squat Window (Decreased MFI & Increased Volume): Shows high volume but little price movement, indicating a tug-of-war between buyers and sellers. This often precedes a breakout as the pressure builds. Fade Window (Decreased MFI & Decreased Volume): Indicates a lack of interest from both buyers and sellers, leading to lower momentum. This typically happens in range-bound markets and may signal consolidation before a new move. For our purposes we are interested in squat bars. This is the sign that volume cannot move the price easily. This type of bar increases the probability of trend reversal. In this indicator we added to enable the MFI filter of reversal bars. If potential reversal bar or two preceding bars have squat state this bar can be interpret as a reversal one. Backtest Results Operating window: Date range of backtests is 2023.01.01 - 2024.12.31. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Percent of capital used in every trade: 50% Maximum Single Position Loss: -5.29% Maximum Single Profit: +29.99% Net Profit: +5472.66 USDT (+54.73%) Total Trades: 103 (33.98% win rate) Profit Factor: 1.634 Maximum Accumulated Loss: 1231.15 USDT (-8.32%) Average Profit per Trade: 53.13 USDT (+0.94%) Average Trade Duration: 76 hours How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart (optimal performance observed on 4h ETH/USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters.
Strategia Pine Script®
di Skyrexio
1
Multi-Timeframe Liquidity LevelsMulti-Timeframe Liquidity Levels – Overview The Multi-Timeframe Liquidity Levels indicator automatically displays significant highs and lows from various timeframes (Daily, Weekly, Monthly, and Quarterly) on your current chart. This allows traders to quickly identify potential support and resistance zones without frequently switching between different timeframe charts. Additionally, the script offers extra lines for special reference points (e.g., the “Midnight” midpoint of the current day and the previous day’s open/close) to highlight potential liquidity zones even more clearly. 1. Core Idea and Benefits Time-Saving: Instead of manually reviewing charts in different timeframes, the indicator fetches relevant high/low levels automatically and shows them on your active timeframe. Clear Layout: Traders instantly see where the Daily, Weekly, Monthly, and Quarterly highs and lows lie—areas often associated with institutional orders or liquidity hunts. Customizable: You can tailor the color scheme, line style (Solid, Dashed, Dotted), and line width, ensuring the displayed levels fit your personal charting style. 2. How It Works Multi-Timeframe High/Low For each timeframe (Day, Week, Month, Quarter), the indicator references the previous candle’s high and low (high , low ). Using request.security(...), these values are plotted on the chart you’re currently viewing. Flexible Display You can individually enable or disable the Daily, Weekly, Monthly, and Quarterly lines, depending on which levels are most relevant to your trading. With Line Style (Solid, Dashed, Dotted) and Line Width, you can easily emphasize certain lines you consider more important. Additional Lines “Midnight” Line: A theoretical midpoint between today’s high and low, which can be useful for gauging daily pivot areas. Previous Day’s Open/Close: Many traders track these reference points to anticipate market reactions. You can show or hide these lines as desired. Automatic Line Removal & Creation When a particular timeframe (e.g., “Show Monthly Levels”) is disabled, the script automatically removes the existing monthly lines. Enabling it again recreates those lines without hassle. 3. Usage and Interpretation Identifying Support and Resistance Highs and lows from higher timeframes are often key zones for entries, exits, or major market reactions. A Daily level may be crucial for short-term traders, whereas Monthly or Quarterly levels can indicate long-term liquidity areas. Spotting Market Shifts If price decisively moves above a Higher-Timeframe line, it could signal strong momentum. Conversely, a failed breakout (where price quickly returns under or above a level) might warn of a potential reversal. Extra Lines as Filters The “Midnight” Line helps visualize a rough central price for the current day, aiding in intraday directional bias. Previous Day’s Open/Close: Common reference points for day traders, where swift approaches and rejections can indicate potential entries or partial take-profit zones. 4. Practical Tips Use Color-Coding Wisely: Assign distinct colors (e.g., Blue for Daily, Green for Weekly, Orange for Monthly, Purple for Quarterly) so you can easily discern which timeframe you’re looking at. Toggle On/Off As Needed: Day traders might focus on Daily and Weekly, while long-term traders may pay closer attention to Monthly and Quarterly. Combine with Price Action: Lines alone don’t constitute a trading strategy. Use them alongside candlestick patterns, volume analysis, or other indicators for a more complete market perspective. 5. Important Notes & Recommendations Not Financial Advice: This indicator simply reflects historical high/low data across multiple timeframes and does not constitute a buy or sell recommendation. Trader Responsibility: Observe how the market actually behaves around these lines and adapt your risk management accordingly.
Indicatore Pine Script®
di Jonny86FXPro
1