Volumetric colored candles with matching pivot point linesCandles are split into 10 categories based on their volume, and can be changed in the options. By default and in the images, white is very high volume, reds are high volume, yellows are medium volume, greens are low and dark-grey is very low.
Adjustments for scale are included in the options. The Magnitude option is a 10x multiplier, so 1=10, 2=100, 3=1000, etc., up to 9. There is also a Multiplier selection option where 1=1, 2=2, 3=3, 4=4, etc.
To attenuate for a given chart, these multipliers will need to be changed. In general, all white means you need to increase the Magnitude and all dark-grey means you need to decrease the magnitude. Somewhere between those two, the Multiplier can be used for further calibration. All this color coating is relational, like a spectrum. As you adjust you will see them maintaining their proportions as the candles switch color (ex. green become yellow while yellow becomes red).
I have also included pivot lines that follow the same logic for color coding. Two options exist for adjusting the pivot high and pivot low points respectively. They do not always correspond to the exact color of the candle producing them, but they should be a rough average (ie. red and green bars making yellow lines). They make for good indicators of how much liquidity may be at a certain support/resistance level. The lines can also be turned off altogether.
If your candles aren't looking right, go to settings of both regular candles and heikin-ashi, and uncheck both border and wick.
I still have some code to clean up and I plan on expanding upon this study. If you like my work consider tipping!
Cerca negli script per "liquidity"
Ravih Pro Momentum BreakoutThis is a Momentum Breakout Strategy on “DAILY Timeframe”
This Breakout Strategy is specially created for Momentum Traders and for Bursa Market. The learning applied here are derived from past market behavioural approach. It takes into account of recent strength of price action and volume.
However, it can be applied for other Exchanges as well; as long as the stock is active with unusual volume.
The Momentum Set-Ups Script is designed for Short Term traders as in 3 to 60 Trading Days holding period or unless and until Exit Signal appears. Sometimes it could extend longer depending on the pace of the Momentum.
It also caters the aggressive traders as in Buy Today Sell Tomorrow/Today (BTST) and Fast in Fast Out (FIFO). These are traders...usually looking for 5% to 7% or 12% gain in a short span of time. However, do take note; momentum stocks are explosive in their moves. Therefore one could maximise the Gain Ride until Exit/Sell Signal appears.
The Script provides you the best High-Probability Profitable Set-Up Entry. The system identifies the stock/s in action Right Now. It is a powerful strategy for trading both Fast and Slow Momentum Stocks.
The Momentum Script is built around 3 Primary Factors namely…
1. Volume
2. Price Action
3. Time
And 2 Secondary Factors namely…
1. Volatility
2. Liquidity
Buy Exit/Sell Arrows are triggered based on last candle bar closed. It plots automatically.
For Long
Light Blue Up Triangle denotes Buy at the Closing Price. Entry Price is Closing Price or with + or – 2% tolerance for the following market day.
For Exit/Sell
Orange Down Triangle denotes Exit to close any remaining position to free up capital. Or...
Red Down Triangle denotes Exit to close any remaining position to free up capital.
Either one of the arrow is Final.
For Setting Up Alerts
The user has the option to Setup Alerts for chart signals that is…for Long and for Exit/Sell.
For Demonstrative purpose...
I have on purpose chosen an O&G counter from a Cold Sector from MYX. This is a time of Pandemic. Therefore, choosing Technology or Glove and Healthcare Sectors would definitely reflect good performance. The idea here is to demonstrate that the Momentum Strategy application works on all market conditions anytime of the year.
Remember...
This strategy is only built for stocks. It is Not for Indices neither for any other financial instruments.
No SHORT signals in this strategy.
Tel Aviv LevelsSimple script that calculates static support/resistance levels for potential price reversals using a calculation for predicting liquidity from a base price, use in confluence with other technical analysis tools.
DM me on tradingview for access.
BTC/Fiat Volume Info for Altcoins: Quickly gauge liquidityBTC/Fiat Volume Info for Altcoins - Quickly gauge liquidity
On chart info that:
displays the daily Alt Coin volume in BTC if it is a BTC pair (or whatever the quote currency is)
displays the daily Alt Coin volume in USDT if it is a USDT pair (or whatever the quote currency)
displays the current timeframes volume for the above also.
each option can be configured on/off
SHITCOINS REKT ZONESShitcoins(XRP, ADA, TRX, EOS, BCH) Bitmex Liquidity Zones. Best used on a 15 min chart.
Don't get REKT! Especially, on Shitcoins :)
TB!Guppy,Fib GMMA, VWap Resistance, Liquidity PoolThis is an assistive chart for the TB! Fibonacci Elliot Wave Oscillator indicator
It incorporates Fib Based fractalized GMMA , Liquidity Pool Theory and VWap based resistance zones.
FVG TheoryThe indicator is intended to facilitate trading with FVGs. It consists of 3 components:
1. Swings:
A swing is a 3-candle formation based on the Williams Fractal Indicator.
The interaction with the last swing is always displayed as a red line. This allows you to recognize the last interaction directly and draw conclusions about the further course of the price (sweep / break).
In addition, the closest fractal is always shown as a green line, which acts as a potential target.
2. FVGs:
FVGs are also known as Inbalance, it is a 3 candle formation where a gap is created in the market. The market often runs into this and reacts.
If the market reacts from an imbalance before it has reached the swing low in the bullish case, the next FVG appears in a different color.
This formation has more power and is therefore color-coded.
If the FVG is particularly strong, measured by the fact that the 3rd candle in the formation breaks the 2nd candle with a candle body, this is marked with a small arrow in the FVG (break away gap).
3. overlapping
If there is a structure point within an FVG (order block, significant swing), a line is drawn there.
These overlaps have a higher confluence than FVGs alone. The wick is preferred, but if there is no overlap, the body of the structure is used.
The line thickness and colors are individually adjustable.
Market Structure RangesI have written a script for determining the BIAS.
It uses fractals of 3 for the highs and lows.
It works as follows:
If a range high is broken (!!!candelclose!!!), the last fractal low is selected as the new low point. The Rangelow is determined from this low point.
If a fractal high now occurs, the range high is set at this point.
This Range between the low range and high range is called "Dealing range" , this is divided at the centre - into premium and discount.
The range stays the same, until we see a body close outside this range!
The same applies to a short scenario, only in reverse.
In the indicator, the higher timeframe is selected, which determines the input for the dealing range. Then the dealing range from the higher timeframe is displayed in each timeframe that we want to use for our trades.
The indicator should be used to trade with the trend: for example, the last higher timeframe break is bullish (displayed in the table) -- called kMS
and on the other hand that we only want to take tades that are in the lower part of the range, i.e. in the discount area for buy trades.
This indicator therefore serves as a filter for the higher timeframe trend and higher timeframe premium/discount ranges.
Opening Levels and ZonesThis indicator will show key weekly and daily opening levels including first and last hour trading zones. These will show NY Eastern Time zones only.
TrendStackTrendStack identifies Bullish, Bearish and Consolidation zones.
The indicator is based on 3 stacked moving averages.
The moving average periods can be changed accordingly under the user settings.
Currently all 3 periods are based on Fibonacci sequence and define short, intermediate and long term trends.
SpartanThe Spartan Strategy.
This is a momentum strategy which attempts to identify when buying pressure or selling pressure is present in the markets.
How to trade the long side:
Once a blue candle appears, enter Long on pullbacks into a blue candle for longs
Place your stop loss on the opposite side of the blue candle.
Target a previous high for longs
How to trade the short side:
Once a red candle appears, enter Short on pullbacks into a red candle for shorts
Place your stop on the opposite side of the red candle.
Target a previous low for shorts
The Multi Touch Confluence Indicator SubplotThe Multi Touch EMA Confluence Indicator Subplot identifies zones where EMAs across 6 different time frames are within a specified range in proximity of the close value. These zones indicate confluence of EMAs.
The confluence zone is specified as a point difference.
When confluence is found, the indicator will paint vertical lines of different color and width.
Blue Zones indicate a confluence of 3 EMAs across all time frames
Orange Zones indicate a confluence of 4 EMAs across all time frames
Red Zones indicate a confluence of 5 or more EMAs across all time frames.
The maximum number of time frames being used is 6.
The maximum number of EMAs per time frame is 4.
When confluence occurs it usually indicates a precursor of price expansion. This indicator can be used to determine when momentum is about to come back into the market.
The Multi Touch EMA Confluence IndicatorThe Multi Touch EMA Confluence Indicator identifies zones where EMAs across 6 different time frames are within a specified range in proximity of the close value. These zones indicate confluence of EMAs.
The confluence zone is specified as a point difference.
When confluence is found, the indicator will paint horizontal lines of different color and width.
Blue Zones indicate a confluence of 3 EMAs across all time frames
Orange Zones indicate a confluence of 4 EMAs across all time frames
Red Zones indicato a confluence of 5 or more EMAs across all time frames.
The maximum number of time frames being used is 6.
The maximum number of EMAs per time frame is 4.
When confluence occurs it usually indicates a precursor of price expansion. This indicator can be used to determine when momentum is about to come back into the market.
ap-fxit-trend-sysAP-FXIT-Trend Indicator
9/19/2019
The following system is designed to capture trend following moves in any market condition.
The system uses two stacked moving averages to filter long and short conditions.
The system uses an oscillator to time when to start looking for entries.
Buy and Sell signals are displayed on chart.
Alerts for BUY ONLY, SELL ONLY or BUY/SELL signals are available.
This system does not provide an alert on when to close positions.
Tradewave-RSI5Calculates the Multi Time Frame RSI Overbought Oversold Conditions.
- Draws a vertical green line when RSI is oversold across 5 time frames of your choice
- Draws a vertical red line when RSI is overbought across 5 time frames of your choice.
Time frames can be modified in indicator settings.
ATRPositionSizerThe ATR Position sizer allows the trader to size Forex and Equity positions based on how much % movement in equity is allowed within a predefined ATR range period.
Current default settings are:
The calculated trade size = N*ATR Movement = % Up/Down Movement in Equity = 1 Unit
N is an ATR multpile.
ATR time frame is defaulted to weekly and can be changed.
% Unit Risk is set to 0.5 and can be changed.
The ATR position sizer plots the recommended trade size (green) and equity line (blue).
A maximum allowed capital allotment to any given trade can also be specified in terms of %. If trade size exceeds max capital allocation, the trade size line turns red.
This type of sizing approach is useful when managing a portfolio of assets.
ForexATRPositionSizerThis script allows me to size up my trades based on account size and ATR. Default is Weekly ATR.
Inputs:
1) Account Size
2) % Unit of Risk
3) ATR Time Frame
4) ATR Period
5) ATR Multiple
The indicator will calculate a trade size for you (1000 = 0.01 lots) across all pairs adjusted by ATR.
1 Unit of Risk (%) is equivalent to ATR Multiple * ATR Weekly of movement.
For example:
Assume you have a 10000 dollar account.
You equate 1% of Equity to N*ATR of movement on weekly chart.
Suppose N*ATR = 100 pips.
Therefore, your trade size will equate to 0.1 lots.
This allows the trader to equalize the effect of equity fluctuations relative to any one given pair.
rb-vwapDeveloper: Andrew Palladino + Rob Booker.
Description: Allows to plot multiple volume weighted moving average lines that start a specified day/time. Currently supports a weekly and monthly VWAP.
1) The Weekly VWAP starts the calculation at a specific time of the week. Default is set to Monday.
2) The Monthly VWAP starts the calculation at a specific time of the month. Default is set to 1.
weekly-vwapAuthor: Andrew Palladino
Date: 1/12/2016
Description: Volume Weighted Moving Average calculated weekly on the start of a specified week day. Default is set to Sunday.