Inizia

Cerca negli script per "screener"

RSI over screener (any tickers)█ OVERVIEW This screener allow you to watch up to 240 any tickers you need to check RSI overbought and oversold using multiple periods, including the percentage of RSIs of different periods being overbought/oversold, as well as the average between these multiple RSIs. █ THANKS LuxAlgo for his RSI over multi length I made function for this RSI and screener based on it. allanster for his amazing idea how to split multiple symbols at once using a CSV list of ticker IDs █ HOW TO USE - hide chart: - add 6 copies of screener - change list number at settings from 1 to 6 - add you tickers Screener shows signals when RSI was overbought or oversold and become to 0, this signal you may use to enter position(check other market condition before enter). At settings you cam change Prefics, Appendix and put you tickers. limitations are: - max 40 tickers for one list - max 4096 characters for one list - tickers list should be separated by comma and may contains one space after the comma By default it shows almost all BINANCE USD-M USDT tickers Also you can adjust table for your screen by changing width of columns at settings. If you have any questions or suggestions write comment or message.
Indicatore Pine Script®
di NoveltyTrade
27
BEST ABCD Pattern ScreenerHello ladies and gentlemen traders Continuing deeper and stronger with the screeners' educational series one more time. This one is heavy crazy mega cool (pardon my french). I - Concept I present to you, ladies and gentlemen, the first screener for harmonic patterns. Starting with an ACBD pattern screener this time!! I used the calculations from Ricardo Santo's script In short, he's using fractals (regular or Bill Williams ) for the pattern calculations. A masterpiece !!! The screener will show in 1 consolidated chart the ABCD patterns for 5 selected assets. Could be stocks, forex, crypto, whatever you feel like making money with II - Definitions The ABCD pattern ( AB=CD ) is one of the classic chart patterns which is repeated over and over again. The ABCD pattern shows perfect harmony between price and time. More info here The Williams Fractal is an indicator, developed by Bill Williams, that aims to detect reversal points (highs and lows) and marks them with arrows. Up fractals and down fractals have specific shapes. The Williams Fractal indicator helps users determine in which direction price will develop Source: www.tradingview.com III - How did I set the screener The visual signals are as follow: - square: whenever there is an ABCD pattern detected Then the colors are: - green when a bullish pattern is detected - red when a bearish pattern is detected 🔸 The script screenshot shows two red squares matching two ABCD bearish pattern from the above panel. As the chart is showing APPL, I highlighted where the screener mentioned the fruit stock ( APPLE, pun, bad joke, Dave out...) 🔸 I tried to make it as clear as I could with red arrows Once again, we pushed together the limits of pine script beyond of what we thought was possible, beyond the realm of this world, reaching finally the dreamt pine script heaven (am I going too far? feel free to tell me) Best regards, Dave
Indicatore Pine Script®
di Daveatt
16
Upside Reversal ScreenerIndicator mainly intended to be used in Pinescript screener to find Upside Reversals - where an instruments drops in price then reverses. The minimum drop (as % or % of instrument ATR) and minimum recovery (as fraction of drop) can be specified. When used as an indicator (Set the "Running in Screener" input to False in the settings) an up arrow will show under the days where an upside reversal occurred. To use in a screener, set it as a favourite indicator, so it will be showin in the PineScript screener. The indicator publishes the Open, High, Low, Close (or last) prices, % price change, % of drop (from high), the recovery (as % of drop), and if the stock matched the reverse settings.
Indicatore Pine Script®
di ldnandrew
Divergence for Many Indicators v4 Screener▋ INTRODUCTION: The “Divergence for Many Indicators v4 Screener” is developed to provide an advanced monitoring solution for up to 24 symbols simultaneously. It efficiently collects signals from multiple symbols based on the “ Divergence for Many Indicators v4 ” and presents the output in an organized table. The table includes essential details starting with the symbol name, signal price, corresponding divergence indicator, and signal time. _______________________ ▋ CREDIT: The divergence formula adapted from the “ Divergence for Many Indicators v4 ” script, originally created by @LonesomeTheBlue . Full credit to his work. _______________________ ▋ OVERVIEW: The chart image can be considered an example of a recorded divergence signal that occurred in $BTCUSDT. _______________________ ▋ APPEARANCE: The table can be displayed in three formats: 1. Full indicator name. 2. First letter of the indicator name. 3. Total number of divergences. _______________________ ▋ SIGNAL CONFIRMATION: The table distinguishes signal confirmation by using three different colors: 1. Not-Confirmed (Orange): The signal is not confirmed yet, as the bar is still open. 2. Freshly Confirmed (Green): The signal was confirmed 1 or 2 bars ago. 3. Confirmed (Gray): The signal was confirmed 3 or more bars ago. _______________________ ▋ INDICATOR SETTINGS: Section(1): Table Settings (1) Table location on the chart. (2) Table’s cells size. (3) Chart’s timezone. (4) Sorting table.            - Signal: Sorts the table by the latest signals.            - None: Sorts the table based on the input order. (5) Table’s colors. (6) Signal Confirmation type color. Explained above in the SIGNAL CONFIRMATION section Section(2): Divergence for Many Indicators v4 Settings As seen on the Divergence for Many Indicators v4 * Explained above in the APPEARANCE section Section(3): Symbols (1) Enable/disable symbol in the screener. (2) Entering a symbol. _______________________ ▋ FINAL COMMENTS: For best performance, add the Screener indicator to an active symbol chart, such as QQQ, SPY, AAPL, BTCUSDT, ES, EURUSD, etc., and avoid mixing symbols from different market allocations. The Divergence for Many Indicators v4 Screener indicator is not a primary tool for making trading decisions.
Indicatore Pine Script®
di MUQWISHI
8
BEST MA Cross/MACD ScreenerHello traders Continuing deeper and stronger with the screeners' educational serie one more time I - Concept This is the first flexible screener I'm releasing. Screener detecting a convergence whenever the MACD and MM cross are giving a signal in the same direction. Those who know me from TradingView ... are aware that I'm big on convergences. I totally think that 1 indicator isn't enough - whatever the timeframe. But building my own convergence detection systems has been fruitful for me II - How did I set the screener The visual signals are as follow: - square: MACD + MA cross convergence. - diamond: Only MACD is selected - circle: Only MA cross is selected Then the colors are: - green when bullish - red when bearish Example Below, I highlighted why we see diamonds on the top screener panel. This is because I only selected the MACD filter Cool Hacks Don't forget that you can add the same indicator multiple times on your chart :) Wishing you all the BEST trading Dave
Indicatore Pine Script®
di Daveatt
22
BEST Long Term Levels Breakout ScreenerHello traders Continuing deeper and stronger with the screeners' educational serie one more time (#daft #punk #private #joke) We don't have to wait for TradingView to allow screener based on custom indicator - we can build our own ^^ I - Long Terms concept I had the idea from @scarff. I think it's genius and I use this long terms level in my trading across all assets. The screener, in particular, analyzes whenever the price breaks out a weekly/monthly/quarterly/yearly level on candle close . Triggering events on candle close = we get rid of the REPAINTING = we remove the fake signals (in that case the fake breakouts). The candle close is based on the close of the current chart => if the chart displays candlesticks on the weekly timeframe, then the considered close will be the weekly close. If in daily timeframe, the close will be .............................. 4h (#wrong)..... kidding :) .............. DAILY obviously II - How did I set the screener The visual signals are as follow: - square: breakout of a high/low weekly level - circle: breakout of a high/low monthly level - diamond: breakout of a high/low quarterly level - flag: breakout of a high/low yearly level - dash: none of the above Then the colors are: - green when bullish - red when bearish - orange/dash when none of the above Cool Hacks "But sir... what can we do with only 3 instruments for a screener?" I agree not much but... As said previously... you can add multiple times the same indicator on a chart :) Wishing you all the BEST trading and.... wait for it... BEST weekend Dave
Indicatore Pine Script®
di Daveatt
5
Ultimate EMA ScreenerHello traders Very busy preparing a few stuff for Black Friday but wanted to remind that I still know Pinescript and how to step up my game :) My master @RicardoSantos once again showed me how to push the pinescript limits one step/dimension further. Kudo also to my client (Judy) for this amazing idea. I inspired myself from his script () to display multiple assets in the same panel - without breaking the chart scaling. In that case, I'm comparing 5 EMAs relatively to each other and display: - a square if they're stacked properly - a triangle if two of them are stacked properly - a dash otherwise For those interested, the conditions are in the f_securitys function. I posted in the past a few screeners using labels but we're limited to 50 labels per script. There isn't such limitation when using the plotshape function - giving us more complete screeners. #uhuuuu I'll post a few more examples this week with different trading strategies/combinations. The possibilities here are (close to) limitless. I'm using the security built-in function to call external assets (here different forex pairs) and we're limited to 40 security calls per script. But nothing preventing us from duplicating the same script a few times and calling different assets each time :) If you'd like to display 10 forex pairs, you only need to add that script on your chart twice and select 5 pairs for the first panel, 5 other pairs for the second panel. You're welcome <3 All the BEST Dave
Indicatore Pine Script®
di Daveatt
24
RSI Divergence Screener by zdmreThis screener tracks the following for up to 20 assets: -All selected tickers will be screened in same timeframes (as in the chart). -Values in table indicate that how many days passed after the last Bullish or Bearish of RSI Divergence. For example, when BTCUSDT appears Bullish-Days Ago (15) , Bitcoin has switched to a Bullish Divergence signal 15 days ago. Thanks to @QuantNomad and @MUQWISHI for building the base for this screener. *Use it at your own risk Note: Screener shows the information about the RSI Divergence Scanner by zdmre with default settings. Based indicator:
Indicatore Pine Script®
di zdmre
14
How To Input CSV List Of Symbol Data Used For ScreenerExample of how to input multiple symbols at once using a CSV list of ticker IDs. The input list is extracted into individual ticker IDs which are then each used within an example screener function that calculates their rate of change. The results for each of the rate of changes are then plotted. For code brevity this example only demonstrates using up to 4 symbols, but the logic is annotated to show how it can easily be expanded for use with up to 40 ticker IDs. The CSV list used for input may contain spaces or no spaces after each comma separator, but whichever format (space or no space) is used must be used consistently throughout the list. If the list contains any invalid symbols the script will display a red exclamation mark that when clicked will display those invalid symbols. If more than 4 ticker IDs are input then only the first 4 are used. If less than 4 ticker IDs are used then the unused screener calls will return `float(na)`. In the published chart the input list is using only 3 ticker IDs so there are only 3 plots shown instead of 4. NOTICE: This is an example script and not meant to be used as an actual strategy. By using this script or any portion thereof, you acknowledge that you have read and understood that this is for research purposes only and I am not responsible for any financial losses you may incur by using this script!
Indicatore Pine Script®
di allanster
14
40+ Coin Screener (workaround to 40 Security Limit Per Script) This is a far inferior method for a screener/scanner (compared to my first publication) but after looking at that script from a noobs eyes again, I could see how this form would be a lot easier to take in/understand so wanted to publish it. Everything that I could think of to mention about this is in my 1st pub so ill leave it to you to check it out...though I did include some comments in the script. It is pretty straight forward but if you have any questions don't hold them in. I'll answer them if I can. The only thing that is not in this one is setting up the alert feature so that you only have to create 1 alert per iteration of the script and it takes care of all of the coins for that iteration/set that is chosen in the settings (so please see previous script if would like to do this for your screener/scanner). To be PERFECTLY CLEAR, the workaround is to the issue of not being able to scan but only 40 coins per script. You can scan more than 40 per script but only if you create "batches" or "sets" that the user can select within the settings which set to use for each iteration of the script on the chart. That being, you have to the script multiple times to the chart and merge them into 1 window and merge the scales (instructions in first publications). Here in this script I am scanning 72 different coins that are the Margin Coins on KUCOIN. I have split them up into 3 sets (24 coins per set). I could have made 2 sets but the script will be slower to load and to respond (like, when it comes to receiving alerts), thus I split them up the way I did. If you want to change any of this there are slightly more details in the previous script. One great use-case that I LOVE about this particular version (and the way I use it) is right at the end of when I see a whole market dump/pump coming to an end and want to know which horse to bet on. Used to think whichever coin come out the fastest from the dump was the one to bet on but quickly learned that 1-2 (or even a few) hrs needs to go by first bc the ones that look the strongest in the beginning are NOT the ones to have performed the best when viewing the results 12 hrs later. IN FACT, many instances of using this exact script for reasons as such has taught me that the manipulators (I believe this to be the case as least) WANT everyone to bet on these that come out the gate the hardest and thus they make them move REALLY hard in the beginning then they QUICKLY become stagnant (moreso, they become WORSE than stagnant, they actually quickly retrace to put you into the negative so that you get out to get into the others now moving (to provide the market with more liquidity. They WANT you to get into a coin thats moving crazy hard so that they can then cease that movement once many fall for the trick just to then make that once strong looking coin now stagnant and make others move crazy hard. They wait for you to get out of the 1st and into the next set of movers just to do this time and time again bc hey, what are we sheep good for other than to provide the big guns with liquidity, am I right? Thats rhetorical, which you would know if you've ever had this happen to you (without a doubt MANY of you have). Let this script (above all other things) provide good evidence to back up this cynical way of viewing the markets to anyone that is questioning it. This prolonged time between when the dump is over and when the ACTUAL movers REALLY start moving can actually be of great benefit to us sheep if used correctly, Firstly, it gives us some time to determine if when we thought was the bottom, ACTUALLY was the bottom. That bottom is easily determined if there are no (or very few) coins that went any lower than the point in time that the script began calculating on. Secondly, it allows us time to wait for the REAL movers and shakers to start moving and shaking. One new feature that I LOVE that TV has implemented is the ability (once the script is added to the chart) to be able to click a point in time on the chart where you want the script to begin its calculations. If this point needs to be changed at any point in time then you can either go into the setting and input the time you wish or simply remove the script and add it again so that you are prompted to select another point in time. Ok, I think that everything I wanted to say. The next version that I will add will be probably my favorite and most used by yours truly...not to mention unique in a way that I have yet to see an implementation anything like it in all of TV's public library. Not to say its not there, but I have yet to come across it and I have DEFINITELY done my fair share of searching for it when I couldn't figure out how to code it for the longest time (though, I was and still am a noob so might get some great feedback on better ways to approach it, but we'll save that jabbering for the next of the publications. I hope each and every one of ya'll (yes, Im from the South) have the GREATEST of Thanksgivings (if in the US that is...I graced my parents with the best gift anyone could have given them 35 years ago on Thanksgiving....MEEEE ;) So I will sure as hell be having a great holiday. Thanks for checking out my script...you can "like" and leave a comment if you so feel the urge to...or not. Im not doing this for me, but rather to stretch my arms out as far as possible to benefit the most people as possible and more people would see the script if it has more likes/comments/traffic pointing towards it...not to mention as other publishers have...it IS gratifying to see a few likes in my side window, which btw, I have MANY more variations and completely diff types of scanners/screeners Ill be publishing in the future and to know that they've become of use....I"VE become of use to the community is very....pleasing to me and does (as I've also seen many publishers mention as well) drive me to want to publish ones that I originally thought I would keep for myself. Peace out people.
Indicatore Pine Script®
di A_Traders_Edge
38
SuperTrend - Custom Screener and Dynamic AlertsTrading View today published a desktop Bad Internet connection indicator ?! which set me thinking… Despite recently introduced Dynamic Alerts many scripts do not leverage the information available for active traders and traders on the GO! So decided to share this script totally ALERT focused on one of the most popular DAY trading indicators. Of course no more BAD internet problem as long your TV APP is configured , you will have enough data for a mental picture of the chart.. The Alerts give you the BAR Close , %percent gain or loss over previous day CLOSE ++ Previous Day High and Low to effectively plan your trade without a chart!(just in case) 2 additions in the way Alerts are delivered over the last script : 1. You get SUMMARY alerts or concatenated alerts by default , however if you uncomment or activate code lines 48 and 55 you will get individual Stock alerts Too! 2. Summary Alerts will come only if there is some Buy or Sell signal NO more empty Alerts! Few useful EXTRAS in the code : 1. Flexible code can convert any indicator to screener or Alert function. 2. You will NOT get Mutable Variable error while converting any indicator to screener as long as the function is in "GLOBAL" scope.. 3. Many Custom Screeners are available but few give OHLC data in output so easily…and very difficult for traders to MODIFY hundreds of lines of code.. 4. For UP or DOWN on SCREEN Stock monitoring copy /paste functions in line 41 and 42 in lieu of CROSS functions in 44 and 51 respectively.. 5. You can also uncomment/activate lines 66 and 67 for labels in monitoring. 6. The default mode of the scripts is set to Alerts! Max Stocks only 20! Finally idea is to help traders to use the great features that TV works so hard to create and constantly improvise. Enjoy Profitable Trading on the Fly !!
Strategia Pine Script®
di sharaaU7
9
CHK 3TIMEFRAME RSI OB-OS SCREENER Sharing RSI Screener. It shows RSI Situation for 12 Stocks. User can replace the stocks as per their respective exchange User can select 3 Time Frames of his/her choice User can change the OverBought / OverSold Values to 70/30. This indicator uses 80/20. RSI BELOW 50 = PINK COLOR OVERSOLD = MAROON COLOR RSI ABOVE 50 = LIGHT GREEN COLOR OVERBOUGHT = DARK GREEN COLOR For Example : This Chart and the Indicator snapshot shows, the stock BPCL is Oversold for the 30 Min TimeFrame For Example : The indicator snapshot shows, the stocks HDFC and AUBANK have their RSI's below 50 across the 30 Min / 60 Min / 120 Min TimeFrames Please give it some time to load, and every time you change Resolution. Add another one, to have a screener screening 24 stocks :)
Indicatore Pine Script®
di Chakku
11
Pivots High-Low Screener & AlertsHi fellow traders , Pleased to share a Pivot High - Low Screener. The script uses the TV inbuilt Pivot function. It Screens 25 tickers default set, these can be modified in the input dialog box. All you need to do is attach to any chart and set the periodicity or the resolution of the chart to your desired alert() frequency requirement. Now go to the input settings icon of the script and set your Pivot right and left parameters! Set the alert from the menu as usual click - Any alert() function call and bingo you are done!! Similarily change the chart periodicity to the next timeframe and set the next alert. No more opening multiple charts and setting individual time consuming alerts(). You will get concatenated alerts or summary alerts for your tickers. Track 25tickers with a single alert for each timeframe(Supports 40 tickers). Happy trading with TV..
Indicatore Pine Script®
di sharaaU7
12
120x ticker screener (composite tickers)In specific circumstances, it is possible to extract data, far above the 40 `request.*()` call limit for 1 single script . The following technique uses composite tickers . Changing tickers needs to be done in the code itself as will be explained further.           ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ 🔶 PRINCIPLE         Standard example:   c1 = request.security('MTLUSDT' , 'D', close)         This will give the close value from 1 ticker (MTLUSDT); c1 for example is 1.153         Now let's add 2 tickers to MTLUSDT; XMRUSDT and ORNUSDT with, for example, values of 1.153 (I), 143.4 (II) and 0.8242 (III) respectively.         Just adding them up 'MTLUSDT+XMRUSDT+ORNUSDT' would give 145.3772 as a result, which is not something we can use...         Let's multiply ORNUSDT by                  100 ->            14340         and   multiply MTLUSDT  by 1000000000 -> 1153000000                 (from now, 10e8 will be used instead of 1000000000)         Then we make the sum.         When we put this in a security call (just the close value) we get:   c1 = request.security('MTLUSDT*10e8+XMRUSDT*100+ORNUSDT', 'D', close)         'MTLUSDT*10e8+XMRUSDT*100+ORNUSDT' -> 1153000000 + 14340 + 0.8242 = 1153014340.8242 (a)         This (a) will be split later on, for example:         1153014330.8242 / 10e8 = 1.1530143408242 -> round -> in this case to 1.153 (I), multiply again by 10e8 -> 1153000000.00 (b)         We subtract this from the initial number:             1153014340.8242   (a)          - 1153000000.0000   (b)           –––––––––––––––––                        14340.8242   (c)         Then -> 14340.8242 / 100 = 143.408242 -> round -> 143.4 (II) -> multiply -> 14340.0000 (d)          -> subtract             14340.8242   (c)          - 14340.0000   (d)           ––––––––––––                      0.8242   (III)         Now we have split the number again into 3 tickers: 1.153 (I), 143.4 (II) and 0.8242 (III)           ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ In this publication the function compose_3_() will make a composite ticker of 3 tickers, and the split_3_() function will split these 3 tickers again after passing 1 request.security() call. In this example: t46 = 'BINANCE:MTLUSDT', n46 = 10e8 , r46 = 3, t47 = 'BINANCE:XMRUSDT', n47 = 10e1, r47 = 1, t48 = 'BINANCE:ORNUSDT', r48 = 4 // T16 ••• T16= compose_3_(t48, t47, n47, t46, n46) ••• = request.security(T16, res, ) ••• = split_3_(c16, n46, r46, n47, r47, r48) 🔶 CHANGING TICKERS If you need to change tickers, you only have to change the first part of the script, USER DEFINED TICKERS Back to our example, at line 26 in the code, you'll find: t46 = 'BINANCE:MTLUSDT', n46 = 10e8 , r46 = 3, t47 = 'BINANCE:XMRUSDT', n47 = 10e1, r47 = 1, t48 = 'BINANCE:ORNUSDT', r48 = 4 // T16 ( t46 , T16 ,... will be explained later) You need to figure out how much you need to multiply each ticker, and the number for rounding, to get a good result. In this case: 'BINANCE:MTLUSDT', multiply number = 10e8, round number is 3 (example value 1.153) 'BINANCE:XMRUSDT', multiply number = 10e1, round number is 1 (example value 143.4) 'BINANCE:ORNUSDT', NO multiply number, round number is 4 (example value 0.8242) The value with most digits after the decimal point by preference is placed to the right side (ORNUSDT) If you want to change these 3, how would you do so? First pick your tickers and look for the round values, for example: 'MATICUSDT', example value =   0.5876 -> round -> 4 'LTCUSDT'    , example value = 77.47      -> round -> 2 'ARBUSDT'    , example value =   1.0231 -> round -> 4 Value with most digits after the decimal point -> MATIC or ARB, let's pick ARB to go on the right side, LTC at the left of ARB, and MATIC at the most left side. -> 'MATICUSDT', LTCUSDT', ARBUSDT' Then check with how much 'LTCUSDT' and 'MATICUSDT' needs to be multiplied to get this: 5876 0 7747 0 1.0231 'MATICUSDT' -> 10e10 'LTCUSDT'      -> 10e3 Replace: t46 = 'BINANCE:MTLUSDT', n46 = 10e8 , r46 = 3, t47 = 'BINANCE:XMRUSDT', n47 = 10e1, r47 = 1, t48 = 'BINANCE:ORNUSDT', r48 = 4 // T16 -> t46 = 'BINANCE:MATICUSDT', n46 = 10e10 , r46 = 4, t47 = 'BINANCE:LTCUSDT', n47 = 10e3, r47 = 2, t48 = 'BINANCE:ARBUSDT', r48 = 4 // T16 DO NOT change anything at t46, n46,... if you don't know what you're doing! Only  • tickers ('BINANCE:MTLUSDT', 'BINANCE:XMRUSDT', 'BINANCE:ORNUSDT', ...),  • multiply numbers (10e8, 10e1, ...) and  • round numbers (3, 1, 4, ...) should be changed. There you go! 🔶 LIMITATIONS 🔹 The composite ticker fails when 1 of the 3 isn't in market in the weekend, while the other 2 are.      That is the reason all tickers are crypto. I think it is possible to combine stock,... tickers, but they have to share the same market hours. 🔹 The number cannot be as large as you want, the limit lays around 15-16 digits.      This means when you have for example 123, 45.67 and 0.000000000089, you'll get issues when composing to this:      -> 123045670.000000000089 (21 digits)      Make sure the numbers are close to each other as possible, with 1 zero (or 2) in between:      -> 1.230045670089 (13 digits by doing -> (123 * 10e-3) + (45.67 * 10e-7) + 0.000000000089) 🔹 This script contains examples of calculated values, % change, SMA, RMA and RSI.      These values need to be calculated from HTF close data at current TF (timeframe).      This gives challenges. For example the SMA / %change is not a problem (same values at 1h TF from Daily data).       RMA , RSI is not so easy though...      Daily values are rather similar on a 2-3h TF, but 1h TF and lower is quite different.      At the moment I haven't figured out why, if someone has an idea, don't hesitate to share.      The main goal of this publication is 'composite tickers ~ request.security()' though. 🔹 When a ticker value changes substantially (x10, x100), the multiply number needs to be adjusted accordingly. 🔶 SETTINGS SHOW SETS SET    •  Length : length of SMA, RMA and RSI    •  HTF : Higher TimeFrame (default Daily) TABLE    •  Size table :                         \ _ Self-explanatory    •  Include exchange name :  /    •  Sort : If exchange names are shown, the exchanges will be sorted first COLOURS    •  CH%    •  RSI    •  SMA (RMA) DEBUG Remember t46 , T16 ,... ? This can be used for debugging/checking ALWAYS DISABLE " sort " when doing so. Example: Set string -> T1 (tickers FIL, CAKE, SOL) (Numbers are slightly different due to time passing by between screen captures) Placing your tickers at the side panel makes it easy to compare with the printed label below the table (right side, 332201415014.45 ), together with the line T1 in the script: t1 = 'BINANCE:FILUSDT' , n1 = 10e10, r1 = 4, t2 = 'BINANCE:CAKEUSDT' , n2 = 10e5 , r2 = 3, t3 = 'BINANCE:SOLUSDT' , r3 = 2 // T1 FIL     :    3.322 CAKE:    1.415 SOL   : 14.56 Now it is easy to check whether the tickers are placed close enough to each other, with 1-2 zero's in between. If you want to check a specific ticker, use " Show Ticker" , see out initial example: Set string     -> T16 Show ticker -> 46 (in the code -> t46 = 'BINANCE:MTLUSDT') (Set at 0 to disable " check string " and NONE to disable " Set string ") -> Debug/check/set away! 😀 🔶 OTHER TECHNIQUES  • REGEX ( Regular expression ) and str.match() is used to delete the exchange name from the ticker, in other words, everything before ":" is deleted by following regex: exch(t) => incl_exch ? t : str.match(t, "(?<=:) +")  • To sort, array.sort_indices() is used (line 675 in the code), just as in my first "sort" publication Sort array alphabetically - educational aSort = arrT.copy() sort_Indices = array.sort_indices(id= aSort, order= order.ascending)  • Numbers and text colour will adjust automatically when switching between light/dark mode by using chart.fg_color / chart.bg_color 🔹 DISCLAIMER Please don't ask me for custom screeners, thank you.
Indicatore Pine Script®
di fikira
80
Enhanced Pressure MTF ScreenerEnhanced Pressure Multi-Timeframe (MTF) Screener Indicator Overview The Enhanced Pressure MTF Screener is an add-on that extends the capabilities of the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis . It provides a clear and consolidated view of buy/sell pressure across multiple timeframes. This indicator allows traders to determine when different timeframes are synchronized in the same trend direction, which is particularly useful for making high-confidence trading decisions. Image below: is the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis with the Enhanced Pressure MTF Screener indicator both active together. Key Features 1.Multi-Timeframe Analysis The indicator screens various predefined timeframes (from 1 week down to 10 minutes). It offers a table view that shows buy or sell ratings for each timeframe, making it easy to see which timeframes are aligned. Traders can choose which timeframes to include based on their trading strategies (e.g., higher timeframes for position trading, lower timeframes for scalping). 2.Pressure and Trend Calculation Uses Buy and Sell Pressure calculations from the Enhanced Buy/Sell Pressure indicator to determine whether buying or selling is dominant in each timeframe. By analyzing pressures on multiple timeframes, the indicator gives a comprehensive perspective of the current market sentiment. The indicator calculates whether a move is strong based on user-defined thresholds, which are displayed in the form of additional signals. 3.Heikin Ashi Option The Heikin Ashi candle type can be toggled on or off. Using Heikin Ashi helps smooth out market noise and provides a clearer indication of trend direction. This is particularly helpful for traders who want to filter out market noise and focus on the primary trend. 4.Table Customization Table Positioning: The table showing timeframe data can be positioned at different locations on the chart—top, middle, or bottom. Text and Alignment: The alignment and text size of the table can be customized for better visual clarity. Color Settings: Users can choose specific colors to indicate buying and selling pressure across timeframes, making it easy to interpret. 5.Strong Movement Indicators The screener provides an additional visual cue (🔥) for timeframes where the movement is deemed strong, based on a user-defined threshold. This helps highlight timeframes where significant buying or selling pressure is present, which could signal potential trading opportunities. How the Screener Works 1.Pressure Calculation For each selected timeframe, the indicator retrieves the Open, High, Low, and Close (OHLC) values. It calculates buy pressure (the range between high and low when the closing price is higher than the opening) and sell pressure (the range between high and low when the closing price is equal to or lower than the opening). The screener computes the pressure ratio, which represents the difference between buying and selling pressure, to determine which side is dominant. 2.Trend Rating and Signal Generation Based on the calculated pressure, the screener determines a trend rating for each timeframe: "Buy," "Sell," or "Neutral." (▲ ,▼ or •) Additionally, it generates a signal (▲ or ▼) to indicate the current trend direction and whether the move is strong (based on the user-defined threshold). If the movement is strong, a fire icon (🔥) is added to indicate that there is significant pressure on that timeframe, signaling a higher confidence in the trend. 3.Customizable Strong Move Thresholds Strong Move Threshold: The screener uses this value to decide whether a trend is significantly strong. A higher value makes it more selective in determining strong moves. Strong Movement Threshold: Helps determine when an additional strong signal should be displayed, offering further insight into the strength of market movement. Inputs and Customization The Enhanced Pressure MTF Screener is highly customizable to fit the needs of individual traders: General Settings: Use Heikin Ashi: Toggle this setting to use Heikin Ashi for a smoother trend representation. Strong Move Threshold: Defines how strong a move should be to be considered significant. Strong Movement Threshold: Specifies the level of pressure required to highlight a move with the fire icon. Table Settings: Position: Choose the vertical position of the screener table (top, middle, or bottom of the chart). Alignment: Align the table (left, center, or right) to best suit your chart layout. Text Size: Adjust the text size in the table for better readability. Table Color Settings: Users can set different colors to represent buying and selling signals for better visual clarity, particularly when scanning multiple timeframes. Timeframe Settings: The screener provides options to include up to ten different timeframes. Traders can select and customize each timeframe to match their strategy. Examples of available timeframes include 1 Week, 1 Day, 12 Hours, down to 10 Minutes, allowing for both broad and detailed analysis. Practical Use Case Identifying Trend Alignment Across Timeframes: Imagine you are about to take a long trade but want to make sure that the trend direction is aligned across multiple timeframes. The screener displays "Buy" ratings across the 4H, 1H, 30M, and 10M timeframes, while higher timeframes (like 1W and 1D) also show "Buy" with strong signals (🔥). This indicates that buying pressure is strong across the board, adding confidence to your trade. Spotting Reversal Opportunities: If a downtrend is evident across most timeframes but suddenly a higher timeframe, such as 12H, changes to "Buy" while showing a strong move (🔥), this could indicate a potential reversal. The screener allows you to spot these discrepancies and consider taking early action. Benefits for Traders 1.Synchronization Across Timeframes: One of the main strengths of this screener is its ability to show synchronized buy/sell signals across different timeframes. This makes it easy to confirm the strength and consistency of a trend. For example, if you see that all the selected timeframes display "Buy," this implies that both short-term and long-term traders are favoring the upside, giving additional confidence to go long. 2.Quick and Visual Trend Overview: The table offers an at-a-glance summary, reducing the time required to manually inspect each timeframe. This makes it particularly useful for traders who want to make quick decisions, such as day traders or scalpers. 3.Strong Move Indicator: The use of fire icons (🔥) provides an easy way to identify significant movements. This is particularly helpful for traders looking for breakouts or strong market conditions that could lead to high probability trades. To put it short or to summarize The Enhanced Pressure MTF Screener is a powerful add-on for traders looking to understand how buy and sell pressure aligns across multiple timeframes. It offers: A clear summary of buying or selling pressure across different timeframes. Heikin Ashi smoothing, providing an option to reduce market noise. Strong movement signals to highlight significant trading opportunities. Customizable settings to fit any trading strategy or style. The screener and the main indicator are best used together, as the screener provides the multi-timeframe overview, while the main indicator provides an in-depth look at each individual bar and trend. I hope my indicator helps with your trading, if you guys have any ideas or questions there is the comment section :D
Indicatore Pine Script®
di Debis03
9
Didi's Needles setup screener Didi's Needles setup screener I basically used the screener created by QuantNomad , made some modifications and used the indicators from the setup Indicators used: Didi Index, ADX, Bollinger Bands, Trix and Stochastic. Signals from each column: Column 'Symbol' Blue Symbol: When the Didi, ADX and BB are with buy signals Yellow Symbol: When Didi, ADX and BB are with sell signals Red Symbol: When ADX, BB, Trix and Stoch are with signals to close the trade ADX' Column ADX Kick: When the ADX has given a Kick (Top or Bottom). ADX was rising and starts to fall Uptrend: When the ADX is up and below the Level and the DI+ is above the DI- Uptrend Strong: When the ADX is up and above the Level and the DI+ is above the DI- Uptrend Falling: When the ADX is below and above the Level and the DI+ is above the DI- Downtrend: When the ADX is below the level and the DI- is above the DI+ Downtrend Strong: When the ADX is above the level and the DI- is above the DI+ Downtrend Falling: When the ADX is below the level and the DI- is above the DI+ Didi' Column Buy Alert: When the Fast Average crosses the Median to the upside (as long as it is not a False Point) = Needle Alert Sell Alert: When Fast Average Crosses Median Down (as long as it is not a False Point) = Needle Alert Needle Buy: When slow average crosses the median down = Needle confirmation Needle Sell: When slow moving average crosses the median to high = Needle confirmation Fake Buy: When the fast moving average crosses the median and the slow moving average is above the median and rising = False Point (Sell signal or if you are positioned on the buy side, hold the buy or raise the hand) Fake Sell: When the fast moving average crosses the median and the slow moving average is below the median and falling = False Point (Buy signal or if you are positioned on the sell side, hold the sell or raise your hand) BB' Column Open Rising: When the Bollinger Bands are open and the Base Mean (BB) is rising Open Falling: When the Bollinger Bands are open and the Base Mean (BB) is falling Parallel Rising: When the Bollinger Bands are parallel and rising Parallel Falling: When the Bollinger Bands are Parallel and falling Close: When the Bollinger Bands are closed Trix Column Bought: When the Trix is above the MA (trix) Sold: When the Trix is below the MA (trix) Stoch Column Bought: When %K is above %D Sold: When %K is below %D -------------------------- Rastreador para o setup de Agulhadas do Didi Eu basicamente usei o screener criado por QuantNomad , fiz algumas modificações e usei os indicadores do setup Indicadores usado: Didi Index, ADX, Bandas de Bollinger, Trix e Estocástico. Sinais de cada coluna: Coluna 'Symbol' Symbol Azul: Quando o Didi, ADX e BB estão com sinais de compra Symbol Amarelo: Quando o Didi, ADX e BB estão com sinais de venda Symbol Vermelho: Quando o ADX, BB, Trix e Stoch estão com sinais para fechar a operação Coluna 'ADX' Kick ADX: Quando o ADX deu um Kick (Topo ou Fundo). ADX vinha subinte e começa cair Uptrend: Quando o ADX está subinte e abaixo do Nivel e o DI+ está acima do DI- Uptrend Strong: Quando o ADX está subinte e acima do Nivel e o DI+ está acima do DI- Uptrend Falling: Quando o ADX está cainte e acima do Nivel e o DI+ está acima do DI- Downtrend: Quando o ADX está subinte e abaixo do Nivel e o DI- está acima do DI+ Downtrend Strong: Quando o ADX está subinte e acima do Nivel e o DI- está acima do DI+ Downtrend Falling: Quando o ADX está cainte e acima do Nivel e o DI- está acima do DI+ Coluna 'Didi' Buy Alert: Quando a média rapida cruza a mediana para cima (contanto que não seja um Ponto Falso) = Alerta da Agulhada Sell Alert: Quando a média rapida cruza a mediana para baixo (contanto que náo seja um Ponto Falso) = Alerta da Agulhada Needle Buy: Quando a média lenta cruza a mediana para baixo = Confirmação da Agulhada Needle Sell: Quando a média lenta cruza a mediana para cima = Confirmação da Agulhada Fake Buy: Quando a média rapida cruza a mediana paa cima e a média lenta está acima da mediana e subindo = Ponto Falso (Sinal de venda ou caso esteja posicionado na compra, segurar a compra ou aumentar a mão) Fake Sell: Quando a média rapida cruza a mediana para baixo e a média lenta está abaixo da mediana e caindo = Ponto Falso (Sinal de compra ou caso esteja posicionado na venda, segurar a venda ou aumentar a mão) Coluna 'BB' Open Rising: Quando as Bandas de Bollingers estão abertas e a média base (BB) está subindo Open Falling: Quando as Bandas de Bollingers estão abertas e a média base (BB) está caindo Parallel Rising: Quando as Bandas de Bollingers estão Paralelas e subindo Parallel Falling: Quando as Bandas de Bollingers estão Paralelas e caindo Close: Quando as Bandas de Bollingers estão fechadas Coluna 'Trix' Bought: Quando o Trix está acima da MA (trix) Sold: Quando o Trix está abaixo da MA (trix) Coluna 'Stoch' Bought: Quando %K está acima do %D Sold: Quando o %K está abaixo do %D
Indicatore Pine Script®
di heeger
39
Donchian Screener█ OVERVIEW This is a screener script for the Donchian Channel indicator . It's an excellent indicator for trend following, a trading strategy which tries to take advantage of long, medium or short-term moves that seem to play out in various markets. █ DESCRIPTION The screener works by scanning through up to 10 symbols and list down symbols that are currently breaking through the upper or lower band as definied by the Donchian Channels, at which point the market signals the start of a bullish or bearish trend. █ HOW TO USE After adding the indicator, open the script settings and type the symbol name and length to be used on the Donchian Channels for each stock. █ PARAMETERS - Use High/Low Price Breakouts: check this box if you want to use price high/low instead of price close to identify breakouts - Panel Position: choose whether you want to position the panel on the top, middle or bottom right side of the graph (default is top) - Default Timeframe: what timeframe to use on the screener (default is daily) - Ticker: the ticker name you want to monitor - Length: length parameter used on Donchian Channel indicator █ FEATURES The screener can scan up to 10 symbols each time. █ LIMITATIONS The screener will scan the symbols breaking out bands on the current bar, and as such, there maybe some delays depending on the stock/ etf /crypto you choose. Some exchanges require an additional subscription to get realtime data.
Indicatore Pine Script®
di starbolt
1
trend Screener downtrendthis is in continuation with - previous trend screener i have published, In this code only downtrend screener is there ,This is type of custom screener I searched and made to screen bulk stocks any one can modify it, other may get help out of it. you can change or add new symbol in input section. in my code i have made defined and printed last close price when downtrend was true. 1. downtrend = ema (close,55)< ema (close,144) and ema (close,144)< ema (close,388) and ema (close,388)<ema(close,576) and close<ema(close,388) if the indicator is printing DOWNTREND=TRUE or UPTREND=TRUE then the corresponding stock is in currently in that trend out of the stocks listed in the code in one code only 40 (max) stocks can be called. to add more stocks I copied same code and changed the stocks in the code, now you can screen 80 stocks at a time. This code runs on each bar and checks if the stocks is in uptrend or down trend. you can customize this screener according to your requirement.
Strategia Pine Script®
di TJalam
17
CHK AIH (ACTION IS HERE!)-ALMA SCREENERWe do not like to stare at the screen whole day, instead we like to jump where the action is.... The Screener was written with this in mind CHK AIH (ACTION IS HERE!)-ALMA BASED SCREENER FEATURES User can enter 3 Resolutions of his/her choice User can select 3 Mov Avg Length of his her choice, which would be identical for all the three timeframes User can enter stock basis his/her region's stock exchange User can shift the screener left or right if not visible in a Multiscreen mode Uses ALMA (Arnaud Legoux Mov Avg) as it smooth and reactive Code is also provided below of MTF ALMA Moving Average OVERLAY on which this screener is based LOGIC For a particular timeframe If all the Moving Average are calibrated in one direction, it will show the requisite color. For Example in an ideal scenario for a bull trend ALMA(5)> ALMA(13) > ALMA(21), once such a situation is identified, the screener will show green. Yellow means lack of Calibration. When 3 timeframes are calibrated, it becomes a high Probability Trade BUGS It is not allowing to enter the D/W/M timeframes, timeframe in numbers ...5/15/60 is working fine. If somebody can fix it it would be great LIMITATIONS Because of TV's limitations only 4 scrips can be entered, however one add the indicator again with new scrips //////////// CREDITS //////////////////////////////////////////////////////////////////////////////////// //// hxxps://www.tradingview.com/script/rwdgyEZe/ /// Thank You Inno14 for graciously sharing your work. Your work has helped immensely !!! //////////////////////////////////////////////////////////////////////////////////////////////////////// ICICIBANK TECHMAHINDRA YESBANK
Indicatore Pine Script®
di Chakku
6
HiLo Screener█ OVERVIEW This is a screener script for the Gann Hilo Indicator . It's an excellent trend analysis indicator to spot trend reversals. █ DESCRIPTION The screener works by scanning through up to 10 symbols and list down symbols that are currently breaking the high or low mean averages as definied by the Gann Hilo Indicator. Once you add it, 2 panels will be added to your chart - the green panel will list the symbols reversing into a bullish trend and the red panel will show the symbols reversing into a bearish trend. █ HOW TO USE After adding the indicator, open the script settings and type the symbol name and length to be used on the Gann Hilo Indicator for each stock. █ FEATURES The screener can scan up to 10 symbols each time. █ LIMITATIONS The screener will scan the symbols reversing trend on the current bar, and as such, there maybe some delays depending on the stock/etf/crypto you choose. Some exchanges require an additional subscription to get realtime data.
Indicatore Pine Script®
di starbolt
1