Inizia

Cerca negli script per "tp"

Money maker EURUSD 15min daytraderVERY IMPORTANT : THIS STRATEGY WAS MADE WITH LEVERAGE IN MIND You need atleast 20X LEVERAGE ACCOUNT IN ORDER TO WORK PROPERLY. With high rewards come high risk . If you dont want to use leverage, use a risk % of less than 0.25 %. The below example is without use of leverage on a capital 100.000 risking only 0.25% on each trade This is a breakout strategy, initially made for EURUSD 15 min for London session. Its made of 4 SMMA and 1 EMA Rules for entry are simple : For buy if our current closed candle is above all moving averages, and they are in ascending order ( 3 > 6 > 9 .... ) and we are in the London session we enter. For sell the same, but in reverse. If closed candle is below all moving averages and they are in descending order ( 3< 6 < 9 .....) and we are in the London session. We have a risk manangement with TP/SL. For exit its either if we reach a tp/sl level, or we reach London finish time. It also has a risk management, calculating the size based on the pips for SL and our current balance. For any questions , let me know.
Strategia Pine Script®
di SoftKill21
2
VWAP + Fibo Dev Extensions StrategyBased on my VWAP + Fibo deviations indicator, I tested some strategies to see if the indicator can be profitable; and I got it ! This strategy uses: H1 timeframe Weekly VWAP +1.618 / +2.618 / -1.618 / -2.618 Deviations Extensions to create 2 bands The value of the deviation First, the 2 bands are plotted : +1.618/+2.618 painted in red and -1.618/-2.618 painted in lime. Then, we wait for the deviation value to reach at least 150 (see thumbnail) to avoid littles moves when the gaps between bands are too short. Entry long position : first candle must crossunder the -1.618 level and low have to stay over the -2.618 low of the second one must stay in the lime band enter the third one if the deviation value is over limit (150) Exit long position : TP : when a high crossover VWAP SL : when a low crossunder -2.618 Entry short position : first candle must crossover the +1.618 level and high have to stay under the +2.618 high of the second one must stay in the red band enter the third one if the deviation value is over limit (150) Exit short position : TP : when a low crossunder VWAP SL : when a high crossover +2.618 Notes : this strategy uses pyramiding (5), be careful and calculate your risk management the comission value is set to 0.08% to include slippages when entering a trade because of market orders This strategy is not an advice to invest, make your own decisions.
Strategia Pine Script®
di UnknownUnicorn4889556
41
BV's ICHIMOKU CLOUD - All Signalshello traders, With this script you will be able to test the different signals offered by the ichimoku cloud system. Crossover Tenkan Kijun Crossover Tenkan Kijun above Kumo Crossover Price Kijun Crossover Price Kijun above Kumo Crossover Price Tenkan Crossover Prince Tenkan aboce Kumo Crossover price Kumo Kumo Color Change Remember to check the JPYPAIR checkbox if you test a JPY/xxx pair, this will adjust the stop loss and take profit calculation. You can also adjust the TP and SL values in the parameters to change their ratio. I had good results in 1.5:1 with the : SL = 2.25 x ATR(14) TP = 1.5 x ATR(14) At your tests, don't hesitate to share your results.
Strategia Pine Script®
di BVTradingJournal
4
Strategy Tester EMA-SMA-RSI-MACDOn Tradingview I never saw a custom adjustable strategy script yet, so this is it, you can change different things and see if you'll get a good strategy or not Settings: First choose the source, you can choose out of: close, open, high, low, ohlc4, hlc3, hl2 Then choose you strategy: Long & Short, Long only or Short only Next, choose your entry "Buy/Long" (which is the "close Short position" when "Short"): - (E)MA 1 > (E)MA 2 (Each can be made ema or sma) - close above (E)MA 1 - RSI strategy - macd > signal - macd > 0 - signal > 0 Then choose your RSI values if needed (for example you want a trigger when EMA 1 > SMA 2 but only if RSI > 60, then change "IF RSI >" from 0 to 60 Next you can choose an extra argument and even a second argument with Higher Time Frame settings Under this you can change your (E)MA values as desired (HTF values, MACD and RSI length can be found lower) All the same with the exit/close (or if "Short", this is your entry) Again, change everything as you wish Then comes the RSI length setting, MACD settings and HTF settings, followed by SL/TP settings (you also can enable/disable SL/TP), and TIME settings (for example you want to know the profit only from this year) Alerts are provided in next script Have fun!
Strategia Pine Script®
di fikira
40
Fixed Percent Stop Loss & Take Profit % - For Study Scripts=========== Fixed Percent Stop Loss & Take Profit % - { FOR STUDY SCRIPTS! } =========== A neat example of how to set up Fixed Stops and Take Profit as a percent of the entry price - This is for setting Alerts within your own Study Script for when either your SL or TP get hit. Yup, that's about it! You can ignore the actual entry/exit orders - they're based on a simple MA cross and are therefore NOT relevant, NOT profitable and NOT recommended! You should be using this code as a way of adding Stops and Takes to your own scripts - hope it helps! Set your "Open Long/Short" Alerts to be triggered "Once per Bar Close" - Set your "SL/TP" Alerts to trigger "Once per Bar". -- We wrote this with a bit of a rush on! ~ If you spot any mistakes/bugs just let us know and we'll get round to them asap! ----------- Good Luck and Happy Trading!
Indicatore Pine Script®
di theCrypster
49
[mya] ATR FilteredATR Filtered for NNFX trading. A classic Average True Range (ATR) indicator with a simple feature to filter out the spikes. The ATR value is the tool to determine your TP and SL on daily time-frame, specifically in the NNFX way of trading. VP mentions in his podcast that when the ATR spikes up you have 2 options: 1. wait 14 candles for the ATR to normalize, 2. use the ATR value prior to the spike. ATR spikes are easy to spot (thus easy to exclude) for an itraday flash crash. On the other hand when volatility increases over several candles (as in the Covid-19 shock) it can be difficult to determine which ATR value to base your TP/SL on. In definition of standard deviation, 95.4% of the value will fall within the 2 sigma bands. Therefore the rest 4.6% can be filtered out as an extreme value (a spike). The ATR in this indicator will plot the standard ATR value in normal condition, then when the ATR spike happens it will stay at the highest value at the point, when the ATR exceeded its 2 sigma band. The filtering will reset when the ATR comes back down below the extended highest value. *Disclaimer: Use at your own risk. I am not a programmer, just another guy trying to beat this game. Let's go get it.
Indicatore Pine Script®
di myataro
3
inwCoin Specific Buy/Sell Price Alert for AutoviewJust simple script to act as conditional stop loss Problem : Traditional Market Stop or Limit Stop, you have to set it with specific price and wait for the price to drop/pump to your stop then it will trigger. But sometime ( so many times ) the price will leave a very long wick up or down to hunt the stoploss that already set in the exchanges.. then it turn back to the opposite side after stop our position from existent!! Thank to Autoview, with this simple script, you can setup your "stop level" without put "stop market" in the order. Just stop when price close below or above specific level in the script, then you can just setup alert to fire the TP/Stop order to exchange via autoview after alert fire. Example; You need to stop loss / TP your position when price "close below 9500" in daily BTC chart - Just set "sell price" to 9500 - and set "Cross down" option When daily chart close below 9500, the script will trigger alert for you to catch and send to any exchange via Autoview. Note; 1) When setting alert in tradingview, make sure to use.. - Crossing Down + 0.8 in alert trigger condition - Set to "Once per bar" ( If you set "once per bar close", it will fire alert in next 2nd candle! ) 2) You need to subscribe to autoview to use the bot. And it's not for everyone. Just do your own research before using! ( try to test with small amount of money first! ) Cheers!
Indicatore Pine Script®
di Real_inwCoin
1
Trade Manager (Open Source Version)Hello my young padawans looking for the FORCE to get richer on your next trade I got pinged at least three times today asking where the hell is the indicator of the day. You asked, I delivered :) Here's your free open-source Trade Manager Version. My associates might kill me for sharing that one... anyway this is a real GIFT. I won't share such quality indicators too often for FREE so hope you'll appreciate its value. It can really help with your day to day trading (on top of making your charts looking more awesome) This is an even better version compared to my previous Trade Manager Trade-Manager . It's basically a standalone version, meaning you'll have to update with 2 lines your own indicator and follow my educational post from yesterday (pasted it below also) to learn how to do it Please read this educational post I published for you before proceeding further : How-to-connect-your-indicator-with-the-Trade-Manager From here you normally connected the data source of your own indicator to the Trade Manager. If not, here's a reminder of the article mentionned above Step 1 - Update your indicator For the screenshot you see above, I used this indicator : Two-MM-Cross-MACD/ . "But sir are you really advertising your other indicators here ??" ... hmmm.... YES but I gave them for free so ... stop complaining my friend :) Somewhere in the code you'll have a LONG and a SHORT condition. If not, please go back to study trading for noobs (I'm kidding !!!) So it should look to something similar nUP = ma_crossover and macd_crossover nDN = ma_crossunder and macd_crossunder What you will need to add at the very end of your script is a Signal plot that will be captured by the Trade Manager. This will give us : // Signal plot to be used as external // if crossover, sends 1, otherwise sends -1 Signal = (nUP) ? 1 : (nDN) ? -1 : na plot(Signal, title="Signal") The Trade Manager engines expects to receive 1 for a bullishg signal and -1 for bearish . Step 2 - Add the Trade Manager to your chart and select the right Data Source I feel the questions coming so I prefer to anticipate :) When you add the Trade Manager to your chart, nothing will be displayed. THIS IS NORMAL because you'll have to select the Data Source to be "Signal" Remember our Signal variable from the Two MM Cross from before, now we'll capture it and.....drumb rolll...... that's from that moment that your life became even more AWESOME The Engine will capture the last signal from the MM cross or any indicator actually and will update the Stop Loss, Take Profit levels based on the parameters you set on the Trade Manager It should work with any indicator as long as you're providing a plot Signal with values 1 and -1 . In any case, you can change the Trade Manager you'll find a better logic for your trading Now let's cover the different parameters of the tool It should be straightforward but better to explain everything here +Label lines : if unchecked, no SL/TPs/... will be displayed +Show Stop Loss Signal : Will display the stop loss label. You have the choice between three options : By default, the Stop Loss is set to NONE. You'll have to select a different option to enable the Stop Loss for real ++Percentage : Will set the SL at a percent distance from the price ++Fixed : SL fixed at a static price ++Trailing % : Trailing stop loss based on percentage level The following is a KEY feature and I got asked for it many times those past two days. I got annoyed of getting the same request so I just did it ++Trailing TP: Will move the Stop Loss if the take profit levels are hit Example: if TP1 is hit, SL will be moved to breakeven. If TP2 is hit, SL will be moved from TP1 to TP2 +Take Profit 1,2,3 : Visually define the three Take Profit levels. Those are percentage levels . Meaning if you set TP1 = 2, it will set the TP1 level 2% away from the entry signal Please note that once a Take profit level is reached, it will magically disappear. This is to be expected I'll share in the future a way more complete version with invalidation, stop loss/take profits based on indicator, take profit based on supports/resistances, ... I believe is such a great tool because can be connected to any indicator. I confess that I tried it only with a few... if you find any that's not working with the Trade manager, please let me know and I'll have a look PS I want to give a HUUUUUUUGE shoutout to the PineCoders community who helped me finishing it Wishing you all the best and a pleasant experience with my work David
Indicatore Pine Script®
di Daveatt
22
No Nonsense NNFX VP Strategy for Back Testing Indicators| jhAfter putting the whole system together, sat down to benchmark the various confirmation indicators, shrink it down to backtest individual confirmation indicators. Results for 24 periods way better than 10, then again it's only one pair. :) More details below. ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Designed per No Nonsense Forex VP rules //For testing your individual indicators before the full system //Originated from causecelebre //Tried to put in as much VP rules as possible /////////////////////////////////////////////////// //Rules Implemented: /////////////////////////////////////////////////// // - SL 1.5 x ATR // - TP 1 x ATR // // - Entry conditions //// - Entry from 1 x confirmation // - Exit conditions //// - Exit on confirmation flip /////////////////////////////////////////////////// //Trades entries /////////////////////////////////////////////////// // - First entry L1 or S1 with standard SL and TP /////////////////////////////////////////////////// //Included Indicators and settings /////////////////////////////////////////////////// // - Confirmtion = SSL 10 /////////////////////////////////////////////////// //Credits // Strategy causecelebre www.tradingview.com // SSL Channel ErwinBeckers www.tradingview.com ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Change log //First release. Testing of indicators //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Strategia Pine Script®
di jiehonglim
1
No Nonsense NNFX VP Strategy for Back Testing | jhMy first script, be kind :) Most of the rules are implemented: - Money management - ATR, Baseline, Confirmation, Volume, Exit More details below. ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Designed per No Nonsense Forex VP rules //Made to be as modular as possible, so we can swap the indicators in and out. //Originated from causecelebre //Tried to put in as much VP rules as possible /////////////////////////////////////////////////// //Rules Implemented: /////////////////////////////////////////////////// // - SL 1.5 x ATR // - TP 1 x ATR // // - Entry conditions //// - Entry within 1 candles of baseline + 1 x confirmation + volume //// - Entry only if baseline is < 1 x ATR // - Exit conditions //// - Exit on exit indicator or when baseline or confirmation flip /////////////////////////////////////////////////// //Trades entries /////////////////////////////////////////////////// // - First entry L1 or S1 with standard SL and TP // - Second entry L2 or S2 with standard SL and exit upon the exit conditions /////////////////////////////////////////////////// //Included Indicators and settings /////////////////////////////////////////////////// // - Baseline = HMA 20 // - Confirmtion = SSL 10 // - Volume = TDFI 4 // - Exit = RVI 4 /////////////////////////////////////////////////// //Credits // Strategy causecelebre // TDFI causecelebre // SSL Channel ErwinBeckers ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Strategia Pine Script®
di jiehonglim
33
Adaptive Zero Lag EMA [STUDY]A user has asked for the Study/Indicator version of this Strategy . If you encounter the error "loop....>100ms" simply toggle the eye icon to hide and unhide the indicator The following is simply quoted from my previous post for your convenience: (obviously there won't be risk, Stop Loss, or Take profit parameters!) OPERATING PRINCIPLE The strategy is based on Ehlers idea that any indicator can be turned into a signal-producing trade system through smoothing and other filtering processes. In fact, I'm using his Zero Lag EMA ( ZLEMA ) as a baseline indicator as well as some code snippets he has made public (1). God bless open source! Next, I've provided the option to use an Instantaneous Frequency Measurement (IFM) method, which will adaptively choose the best period for the ZLEMA (2) I've written other studies that use the differential calculus approximations for IFM, so it was only natural to include them in this strategy. The primary two are Cosine IFM (3) and In-phase Quadrature IFM (4). You can also find an indicator with both plotted and the ability to average them together, as one IFM prefers long periods and the other short. (5) BEFORE WE BEGIN 1. This strategy only runs on "normal" FX pairs ( EURUSD , GBPJPY , AUDUSD ...) and will fail on Metals or Commodities. Cryptos are largely untested. 2. Please run it on these time frames: M15 to D. Anything outside this range will likely fail. HOW TO USE AND SUCCEED 1. If the Default settings don't produce good results right off the bat, then lower gain limit to 1 or 2 and threshold to 0.01. 2. Test each setting under adaptive method. If you want to leave it Off, then I'd recommend using some kind of IFM (see my links below) to discover the most efficient period to use. 3. Once you have the best adaptive method chosen, begin incrementing gain limit until you find a nice balance between profit factor ( PF ) and drawdown. 4. Now, begin incrementing threshold. The goal is to have PF above 2 and a drawdown as low as possible. 5. Finally, change the source! Typically, close is the best option, but I have run into cases where high yielded the highest returns and win rate. 6. Sit back, relax, and tweak the risk until you're happy with the return and drawdown amounts. ADVANCED You may need to adjust take profit (TP) points and stop loss (SL) points to create the best entry possible. Don't be greedy! You'll likely have poor results if the TP is set to 300 and SL is 50. If you are trading a pair that has a long Dominant Cycle Period, then you may increase Max Period to allow the IFM to accept longer periods. Any period above the Max Period will be rejected. This may increase lag time! Cheers and good luck trading! -DasanC (1)www.mesasoftware.com (2)www.jamesgoulding.com (3) Cosine IFM (4) I-Q IFM (5) Averaging IFM IFM stands for Instantaneous frequency measurement
Indicatore Pine Script®
di DasanC
3
Adaptive Zero Lag EMA v2This is my most successful strategy to date! Please enjoy and join the Open Source movement by sharing your code and ideas online! OPERATING PRINCIPLE The strategy is based on Ehlers idea that any indicator can be turned into a signal-producing trade system through smoothing and other filtering processes. In fact, I'm using his Zero Lag EMA (ZLEMA) as a baseline indicator as well as some code snippets he has made public (1). God bless open source! Next, I've provided the option to use an Instantaneous Frequency Measurement (IFM) method, which will adaptively choose the best period for the ZLEMA (2) I've written other studies that use the differential calculus approximations for IFM, so it was only natural to include them in this strategy. The primary two are Cosine IFM (3) and In-phase Quadrature IFM (4). You can also find an indicator with both plotted and the ability to average them together, as one IFM prefers long periods and the other short. (5) BEFORE WE BEGIN 1. This strategy only runs on "normal" FX pairs (EURUSD, GBPJPY, AUDUSD ...) and will fail on Metals or Commodities. Cryptos are largely untested. 2. Please run it on these time frames: M15 to D. Anything outside this range will likely fail. HOW TO USE AND SUCCEED 1. If the Default settings don't produce good results right off the bat, then lower gain limit to 1 or 2 and threshold to 0.01. 2. Test each setting under adaptive method . If you want to leave it Off , then I'd recommend using some kind of IFM (see my links below) to discover the most efficient period to use. 3. Once you have the best adaptive method chosen, begin incrementing gain limit until you find a nice balance between profit factor (PF) and drawdown. 4. Now, begin incrementing threshold . The goal is to have PF above 2 and a drawdown as low as possible. 5. Finally, change the source ! Typically, close is the best option, but I have run into cases where high yielded the highest returns and win rate. 6. Sit back, relax, and tweak the risk until you're happy with the return and drawdown amounts. ADVANCED You may need to adjust take profit (TP) points and stop loss (SL) points to create the best entry possible. Don't be greedy! You'll likely have poor results if the TP is set to 300 and SL is 50. If you are trading a pair that has a long Dominant Cycle Period , then you may increase Max Period to allow the IFM to accept longer periods. Any period above the Max Period will be rejected. This may increase lag time! Cheers and good luck trading! -DasanC PS - This code doesn't repaint or have future-leak, which was present in Pinescript v2. PPS - Believe me! These returns are typical! Sometimes you must push aside the "if it's too good to be true..." mindset that society has ingrained in you. Do you really believe the most successful pass up opportunities before investigating them? ;) (1) Ehlers & Ric Zero Lag EMA (2) Measuring Cycles by Ehlers (3) Cosine IFM (4) Inphase Quadrature IFM (5) Averaging IFM
Strategia Pine Script®
di DasanC
31
MA cross strategy VtsThe simple Moving average cross strategy is here implemented. I guess there are multitudes of similar scripts around. I post this one since I was asked by some friends, and I'll let it free to use for anybody. Here you can choose the year where to start backtesting, the source, the type of MA, the SL and TP multiplicators of ATR, for which you can also choose the averaging period. Feel free to modify this script. I would be grateful if you could preserve the first lines of comments including my user names. The MA cross strategies can be very effective, especially when used on the daily TF. Try for example the combo EMA15-EMA30 SL=1.5ATR TP=1ATR on EURCHF daily to get an impressive 83% win ratio. Or EMA20-EMA81 on the GBPCHF to get an 87%. In those cases where EMA does not perform well, try to set a less lagging MA, like the Hull MA. I hope you like this script so that you could push the like button multiple (odd) times and you start following me. I've got a bunch of other interesting scripts to share. Comments and suggestions are welcome.
Strategia Pine Script®
di vitelot
9
Forex Master v4.0 (EUR/USD Mean-Reversion Algorithm)DESCRIPTION Forex Master v4.0 is a mean-reversion algorithm currently optimized for trading the EUR/USD pair on the 5M chart interval. All indicator inputs use the period's closing price and all trades are executed at the open of the period following the period where the trade signal was generated. There are 3 main components that make up Forex Master v4.0: I. Trend Filter The algorithm uses a version of the ADX indicator as a trend filter to trade only in certain time periods where price is more likely to be range-bound (i.e., mean-reverting). This indicator is composed of a Fast ADX and a Slow ADX, both using the same look-back period of 50. However, the Fast ADX is smoothed with a 6-period EMA and the Slow ADX is smoothed with a 12-period EMA. When the Fast ADX is above the Slow ADX, the algorithm does not trade because this indicates that price is likelier to trend, which is bad for a mean-reversion system. Conversely, when the Fast ADX is below the Slow ADX, price is likelier to be ranging so this is the only time when the algorithm is allowed to trade. II. Bollinger Bands When allowed to trade by the Trend Filter, the algorithm uses the Bollinger Bands indicator to enter long and short positions. The Bolliger Bands indicator has a look-back period of 20 and a standard deviation of 1.5 for both upper and lower bands. When price crosses over the lower band, a Long Signal is generated and a long position is entered. When price crosses under the upper band, a Short Signal is generated and a short position is entered. III. Money Management Rule 1 - Each trade will use a limit order for a fixed quantity of 50,000 contracts (0.50 lot). The only exception is Rule Rule 2 - Order pyramiding is enabled and up to 10 consecutive orders of the same signal can be executed (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts). Rule 3 - Every order will include a bracket with both TP and SL set at 50 pips (note: the algorithm only closes the current open position and does not enter the opposite trade once a TP or SL has been hit). Rule 4 - When a new opposite trade signal is generated, the algorithm sends in a larger order to close the current open position as well as open a new one (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts. A Short Signal is generated shortly after the 14th Long Signal. The algorithm then sends in a sell order for 400,000 contracts to close the 350,000 contracts long position and open a new short position of 50,000 contracts).
Strategia Pine Script®
di Stable_Camel
16
Ichimoku Cloud Pro [CongTrader]📌 Description (dùng khi publish) Ichimoku Cloud Pro This script is a customized version of the Ichimoku Cloud with additional features for flexibility and clarity in trading analysis. It includes: Multiple built-in presets (Default, Crypto, Scalping, Forex). Optional higher timeframe EMA filter for trend confirmation. Buy/Sell/TP/SL signal labels. Clear visualization of Ichimoku lines and cloud. Info table for real-time status display. 📖 How to use Add the indicator to your chart. Choose your preferred preset (Crypto, Forex, Scalping, or Default). Optionally enable the HTF EMA filter to trade only in the major trend direction. Look for confluence: Cloud color change (bullish/bearish). Tenkan/Kijun cross. Chikou span confirmation. Use the built-in signals as a visual aid, not as a standalone trading system. Combine with your own risk management and trading strategy. ⚠️ Disclaimer This indicator is provided for educational and research purposes only. It does not guarantee profits and should not be considered financial advice. Always backtest and practice proper risk management before applying to live trading. The author takes no responsibility for any financial losses incurred from using this script. 🙏 Acknowledgment Thank you for using Ichimoku Cloud Pro . Your support and feedback are greatly appreciated. Wishing you success in your trading journey! 🚀 #Ichimoku #IchimokuCloud #Trading #Forex #Crypto #Scalping #Trend #Indicator #CongTrader
Indicatore Pine Script®
di CongTrader_
Apex Edge - London Open Session# Apex Edge - London Open Session Trading System ## Overview The London Open Session indicator captures institutional price action during the first hour of the London forex session (8:00-9:00 AM GMT) and identifies high-probability breakout and retest opportunities. This system tracks the session's high/low range and generates precise entry signals when price breaks or retests these key institutional levels. ## Core Strategy **Session Tracking**: Automatically identifies and marks the London Open session boundaries, creating a trading zone from the first hour's price range. **Dual Entry Logic**: - **Breakout Entries**: Triggers when price closes beyond the session high/low and continues in that direction - **Retest Entries**: Activates when price returns to test the broken level as new support/resistance **Performance Analytics**: Built-in win rate tracking displays real-time performance statistics over user-defined lookback periods, enabling data-driven optimization for each currency pair. ## Key Features ### Automated Zone Detection - Precise London session timing with timezone offset controls - Visual session boundaries with customizable colours - Automatic high/low range calculation and display ### Smart Entry System - Breakout confirmation requiring candle close beyond zone - Retest detection with configurable pip distance tolerance - Separate risk/reward ratios for breakout vs retest entries - Visual entry arrows with clear trade direction labels ### Performance HUD - Real-time win rate calculation over customizable periods (7-365 days) - Total trades tracking with win/loss breakdown - Average risk-reward ratio display - Color-coded performance metrics (green >70%, yellow >50%, red <50%) ### PineConnector Integration - Direct MT4/MT5 execution via PineConnector alerts - Proper forex pip calculations for all currency pairs - Customizable risk percentage per trade - Symbol override capability for broker compatibility - Automatic SL/TP level calculation in pips ## Critical Usage Requirements ### Pair-Specific Optimization Each currency pair requires individual optimization due to varying volatility characteristics, institutional participation levels, and typical price ranges during London hours. The performance HUD is essential for identifying optimal settings before live trading. **Recommended Testing Process**: 1. Apply indicator to desired currency pair and timeframe 2. Experiment with session timing - while 8:00-9:00 AM GMT is standard, some pairs may show improved performance with alternative hourly windows (e.g., 7:00-8:00 AM or 9:00-10:00 AM) 3. Adjust Stop Loss distances, Risk/Reward ratios, and Retest distances 4. Monitor win rate over 30+ day periods using the performance HUD 5. Only proceed with live alerts once consistent 60%+ win rates are achieved 6. Create separate optimized chart setups for each profitable pair/timeframe combination ### Timeframe Specifications This indicator is specifically designed and tested for: - **1-minute charts**: Optimal for capturing immediate institutional reactions - **5-minute charts**: Balanced approach between noise reduction and opportunity frequency Higher timeframes generally produce inferior results due to increased noise and reduced institutional edge during the London session window. ## Settings Configuration ### Session Timing - **London Open/Close Hours**: Adjust for your chart's timezone - **Rectangle End Time**: Set to 4:30 PM to stop signals before NY session close - **Timezone Offset**: Ensure accurate London session capture ### Entry Parameters - **Retest Distance**: 3-8 pips depending on pair volatility - **Stop Loss Pips**: Separate settings for breakouts (10-15 pips) and retests (8-12 pips) - **Risk/Reward Ratios**: Independent ratios for different entry types ### PineConnector Setup - **License ID**: Your PineConnector license key - **Symbol Override**: MT4/MT5 symbol names if different from TradingView - **Risk Percentage**: Position size as percentage of account balance - **Prefix/Comment**: Organize trades in terminal ## Manual Trading Limitations Without PineConnector automation, traders face significant practical challenges: **Settings Management**: Each currency pair requires different optimized parameters. Switching between charts means manually adjusting multiple settings each time, creating potential for errors and missed opportunities. **Timing Sensitivity**: London Open signals can occur rapidly during high-volatility periods. Manual execution may result in slippage or missed entries. **Multi-Pair Monitoring**: Tracking 4-11 currency pairs simultaneously while manually adjusting settings for each switch becomes impractical for most traders. **Parameter Consistency**: Risk of using suboptimal settings when quickly switching between pairs, potentially compromising the careful optimization work. ## Recommended Workflow 1. **Historical Testing**: Use win rate HUD to identify profitable pairs and optimal parameters 2. **Demo Automation**: Test PineConnector alerts on demo accounts with optimized settings 3. **Live Implementation**: Deploy alerts only on proven profitable pair/timeframe combinations 4. **Ongoing Monitoring**: Regular review of performance metrics to maintain edge ## Risk Disclaimer This indicator provides analysis tools and automation capabilities but does not guarantee profitable trading outcomes. Past performance does not predict future results. Users should thoroughly backtest and demo trade before risking live capital. The London session strategy works best during specific market conditions and may underperform during low volatility or unusual market environments. ## Support Requirements Successful implementation requires: - Basic understanding of London session market dynamics - PineConnector subscription for automation features - Patience for proper optimization process - Realistic expectations about win rates and drawdown periods This system is designed for serious traders willing to invest time in proper optimization and risk management rather than plug-and-play solutions.
Indicatore Pine Script®
di ApexEdge
1
MACD StrategyOverview The "MACD Strategy" is a straightforward trading strategy tested for BTCUSDT Futures on the 1-minute timeframe, leveraging the Moving Average Convergence Divergence (MACD) indicator to identify momentum-based buy and sell opportunities. Developed with input from expert trading analyst insights, this strategy combines technical precision with risk management, making it suitable for traders of all levels on platforms like TradingView. It focuses on capturing trend reversals and momentum shifts, with clear visual cues and automated alerts for seamless integration with trading bots (e.g., Bitget webhooks). #### How It Works This strategy uses the MACD indicator to generate trading signals based on momentum and trend direction: - **Buy Signal**: Triggered when the MACD line crosses above the signal line, and the MACD histogram turns positive (above zero). This suggests increasing bullish momentum. - **Sell Signal**: Triggered when the MACD line crosses below the signal line, and the MACD histogram turns negative (below zero), indicating growing bearish momentum. Once a signal is detected, the strategy opens a position (long for buy, short for sell) with a position size calculated based on your risk tolerance. It includes a stop-loss to limit losses and a take-profit to lock in gains, both dynamically adjusted using the Average True Range (ATR) for adaptability to market volatility. #### Key Features - **MACD-Based Signals**: Relies solely on MACD for entry points, plotted in a separate pane for clear momentum analysis. - **Risk Management**: Automatically calculates position size based on a percentage of your account balance and sets stop-loss and take-profit levels using ATR multipliers and a risk:reward ratio. - **Visual Feedback**: Plots entry, stop-loss, and take-profit lines on the chart with labeled markers for easy tracking. - **Alerts**: Includes Bitget webhook-compatible alerts for automated trading, notifying you of buy and sell signals in real-time. #### Input Parameters - **Account Balance**: Default 10000 – Set your initial trading capital to determine position sizing. - **MACD Fast Length**: Default 12 – The short-term EMA period for MACD sensitivity. - **MACD Slow Length**: Default 26 – The long-term EMA period for MACD calculation. - **MACD Signal Length**: Default 9 – The smoothing period for the signal line. - **Risk Per Trade (%)**: Default 3.0 – The percentage of your account balance risked per trade (e.g., 3% of 10000 = 300). - **Risk:Reward Ratio**: Default 3.0 – The ratio of potential profit to risk (e.g., 3:1 means risking 1 to gain 3). - **SL Multiplier**: Default 1.0 – Multiplies ATR to set the stop-loss distance (e.g., 1.0 x ATR). - **TP Multiplier**: Default 3.0 – Multiplies ATR to set the take-profit distance, adjusted by the risk:reward ratio. - **Line Length (bars)**: Default 25 – Duration in bars for displaying trade lines on the chart. - **Label Position**: Default 'left' – Position of text labels (left or right) relative to trade lines. - **ATR Period**: Default 14 – The number of periods for calculating ATR to measure volatility. #### How to Use 1. **Add to Chart**: Load the "MACD Strategy" as a strategy and the "MACD Indicator" as a separate indicator on your TradingView chart (recommended for BTCUSDT Futures on the 1-minute timeframe). 2. **Customize Settings**: Adjust the input parameters based on your risk tolerance and market conditions. For BTCUSDT Futures, consider reducing `Risk Per Trade (%)` during high volatility (e.g., 1%) or increasing `SL Multiplier` for wider stops. 3. **Visual Analysis**: Watch the main chart for trade entry lines (green for buy, red for sell), stop-loss (red), and take-profit (green) lines with labels. Use the MACD pane below to confirm momentum shifts. 4. **Set Alerts**: Create alerts in TradingView for "Buy Signal" and "Sell Signal" to automate trades via Bitget webhooks. 5. **Backtest and Optimize**: Test the strategy on historical BTCUSDT Futures 1-minute data to fine-tune parameters. The short timeframe requires quick execution, so monitor closely for slippage or latency. #### Tips for Success - **Market Conditions**: This strategy performs best in trending markets on the 1-minute timeframe. Avoid choppy conditions where MACD crossovers may produce false signals. - **Risk Management**: Start with the default 3% risk per trade and adjust downward (e.g., 1%) during volatile periods like BTCUSDT news events. The 3:1 risk:reward ratio targets consistent profitability. - **Timeframe**: Optimized for 1-minute charts; switch to 5-minute or 15-minute for less noise if needed. - **Confirmation**: Cross-check MACD signals with price action or support/resistance levels for higher accuracy on BTCUSDT Futures. #### Limitations - This strategy relies solely on MACD, so it may lag in fast-moving or sideways markets. Consider adding a secondary filter (e.g., RSI) if needed. - Stop-loss and take-profit are ATR-based and may need adjustment for BTCUSDT Futures’ high volatility, especially during leverage trading. #### Conclusion The "MACD Strategy" offers a simple yet effective way to trade momentum shifts using the MACD indicator, tested for BTCUSDT Futures on the 1-minute timeframe, with robust risk management and visual tools. Whether you’re scalping crypto futures or exploring short-term trends, this strategy provides a solid foundation for automated or manual trading. Share your feedback or customizations in the comments, and happy trading!
Strategia Pine Script®
di thetraderlodge