Inizia

Cerca negli script per "vwap"

Day trading volume based levels by VhatkarThis script identifies dynamic support and resistance levels based on volume and price action analysis. It uses a unique algorithm that combines volume force calculations with pivot points to determine key levels where price is likely to react. Originality and Usefulness : Innovative Volume Force Calculation : The script calculates upforce and downforce based on volume and price movement, providing a novel insight into buying and selling pressure. Unlike traditional volume indicators, this approach offers a more nuanced understanding of market dynamics. Dynamic Pivot Points : Pivot points are dynamically adjusted based on volume force and highest high calculations, unlike conventional static pivot points. This makes the levels more responsive to real-time market conditions, offering traders a competitive edge. Adaptive Target Levels : The script sets target and stop prices for both long and short positions, with adjustable percentages based on the chosen timeframe. This feature is particularly useful for day traders looking for precise entry and exit points. Unique Timeframe Adjustments : The script includes specific adjustments for different timeframes (e.g., 15m, 30m, 60m), optimizing the support and resistance levels for day trading strategies. This adaptability is not commonly found in existing open-source scripts. Volume-Weighted Adjustments : The integration of VWAP (Volume-Weighted Average Price) into the volume force calculation adds an extra layer of accuracy, helping traders make more informed decisions. Comprehensive Visual Representation : The script offers clear visual plots of entry, target, and stop levels, along with color-coded fill areas that indicate different target zones. This visual clarity enhances user experience and decision-making. Unique Features Compared to Open-Source Scripts : Advanced Volume Force Algorithm : While many open-source scripts rely solely on price action or basic volume indicators, this script integrates a sophisticated volume force algorithm. This unique approach allows traders to identify more accurate support and resistance levels based on real market activity. Dynamic and Adaptive Pivot Points : Unlike traditional open-source scripts that use static pivot points, this script dynamically adjusts pivot points based on the highest high and volume force. This dynamic adjustment provides a more precise and adaptable analysis suitable for various market conditions. Integrated VWAP Calculation : Incorporating VWAP into volume force calculations adds an extra dimension of accuracy, allowing for more reliable trading signals. This feature differentiates the script from simpler open-source alternatives that may not include such advanced calculations. How to Use : Apply the Script : Add the "Vhatkar Dynamic S/R Levels" script to your chart. Make sure your chart has volume data as the script relies on volume calculations. Select Timeframe : The script is designed for day trading timeframes such as 5m, 15m, and 30m. Ensure you are using one of these timeframes for optimal performance. Adjust Parameters : Target Lines : Set the number of target lines using the SLRange input. Increase the count if fewer lines are visible or decrease if too many lines are cluttering the chart. Interpreting Signals : Long Entries : When the close price is above the pivot point, the script plots potential long entry points and target levels (TP1, TP2, TP3) as well as a stop-loss level. Short Entries : When the close price is below the pivot point, the script plots potential short entry points and target levels (TP1, TP2, TP3) as well as a stop-loss level. Visual Aids : Use the color-coded fill areas to quickly identify target zones and stop levels. Trade Management : Utilize the plotted entry, target, and stop levels to manage your trades. Adjust your trading strategy based on the levels provided by the script. Usage : Designed for day trading on timeframes such as 5m, 15m, and 30m. Provides clear visual plots of entry, target, and stop levels. Offers flexibility with adjustable parameters to suit different trading styles.
Indicatore Pine Script™
di Vhatkar
1
Multi-Timeframe Trend TableThe "Multi-Timeframe Trend Table" indicator is a tool that consolidates a variety of critical trading metrics into a single, easy-to-read table format. This indicator is especially useful for traders who need to analyze multiple timeframes and indicators simultaneously to make informed trading decisions. By displaying a broad spectrum of data including trend information, rangebound status, volatility levels, VWAP (Volume Weighted Average Price), and specific candlestick patterns, the indicator provides a comprehensive overview of market conditions across different timeframes. Functionality and Components At its core, the indicator provides real-time insights into market trends by showing whether each timeframe is experiencing an upward, downward, or neutral trend based on simple moving averages. This is complemented by the "Rangebound" status, which indicates whether the price is trading within a defined range, giving insights into market consolidation periods. This can be critical for identifying breakouts or breakdowns from established ranges. Volatility Measurement Another key feature of the indicator is the "Volatility" column, which rates the market's volatility on a scale from 1 to 10. This feature uses the Average True Range (ATR) to assess how drastically prices are changing within a given timeframe, providing a numerical value that helps traders understand the intensity of price movements. High volatility levels (scores above 6) are highlighted, which can be crucial for strategies that prefer high volatility. VWAP and Candlestick Patterns The indicator also displays the VWAP, which is essential for traders who focus on volume as it shows the average price a security has traded at throughout the day, based on both volume and price. It is especially useful for traders looking to confirm trend directions or catch potential reversals. Additionally, the "Candle" column enhances the indicator's utility by identifying specific candlestick patterns like Doji, Hammer, Inverted Hammer, Bullish Engulfing, and Bearish Engulfing, which are pivotal for pinpointing momentum changes and potential entry or exit points. Usage Strategy Traders can utilize this indicator by setting up specific rules based on the information provided. For instance, a possible strategy could involve entering a trade when a Bullish Engulfing pattern appears in a low-volatility environment as indicated by a volatility score under 6, suggesting a potential uptrend start with limited downside risk. Similarly, a trader might consider exiting a position or taking a short position when a Bearish Engulfing pattern is identified during high volatility periods, signaling possible sharp price declines. Adaptability and Customization An added advantage is the indicator’s adaptability; traders can customize which columns to display based on their trading preferences and strategies. Whether focusing on trends, volatility, or candlestick patterns, users can configure the table to match their specific needs. This makes it a versatile tool suited for various trading styles and objectives, from day trading to swing trading. Overall Utility Overall, the "Multi-Timeframe Trend Table" indicator is an invaluable asset for traders who manage multiple instruments across different timeframes, offering a bird's-eye view of the markets in one concise table. It aids in quick decision-making by providing all necessary data points at a glance, reducing the need to switch between multiple charts and potentially missing critical market movements. By integrating trend analysis with volatility and candlestick patterns, it equips traders with a powerful synthesis of technical analysis tools to enhance their trading strategies and improve market timing.
Indicatore Pine Script™
di brhodes88
1
Trend Deviation strategy - BTC [IkkeOmar]Intro: This is an example if anyone needs a push to get started with making strategies in pine script. This is an example on BTC, obviously it isn't a good strategy, and I wouldn't share my own good strategies because of alpha decay. This strategy integrates several technical indicators to determine market trends and potential trade setups. These indicators include: Directional Movement Index (DMI) Bollinger Bands (BB) Schaff Trend Cycle (STC) Moving Average Convergence Divergence (MACD) Momentum Indicator Aroon Indicator Supertrend Indicator Relative Strength Index (RSI) Exponential Moving Average (EMA) Volume Weighted Average Price (VWAP) It's crucial for you guys to understand the strengths and weaknesses of each indicator and identify synergies between them to improve the strategy's effectiveness. Indicator Settings: DMI (Directional Movement Index): Length: This parameter determines the number of bars used in calculating the DMI. A higher length may provide smoother results but might lag behind the actual price action. Bollinger Bands: Length: This parameter specifies the number of bars used to calculate the moving average for the Bollinger Bands. A longer length results in a smoother average but might lag behind the price action. Multiplier: The multiplier determines the width of the Bollinger Bands. It scales the standard deviation of the price data. A higher multiplier leads to wider bands, indicating increased volatility, while a lower multiplier results in narrower bands, suggesting decreased volatility. Schaff Trend Cycle (STC): Length: This parameter defines the length of the STC calculation. A longer length may result in smoother but slower-moving signals. Fast Length: Specifies the length of the fast moving average component in the STC calculation. Slow Length: Specifies the length of the slow moving average component in the STC calculation. MACD (Moving Average Convergence Divergence): Fast Length: Determines the number of bars used to calculate the fast EMA (Exponential Moving Average) in the MACD. Slow Length: Specifies the number of bars used to calculate the slow EMA in the MACD. Signal Length: Defines the number of bars used to calculate the signal line, which is typically an EMA of the MACD line. Momentum Indicator: Length: This parameter sets the number of bars over which momentum is calculated. A longer length may provide smoother momentum readings but might lag behind significant price changes. Aroon Indicator: Length: Specifies the number of bars over which the Aroon indicator calculates its values. A longer length may result in smoother Aroon readings but might lag behind significant market movements. Supertrend Indicator: Trendline Length: Determines the length of the period used in the Supertrend calculation. A longer length results in a smoother trendline but might lag behind recent price changes. Trendline Factor: Specifies the multiplier used in calculating the trendline. It affects the sensitivity of the indicator to price changes. RSI (Relative Strength Index): Length: This parameter sets the number of bars over which RSI calculates its values. A longer length may result in smoother RSI readings but might lag behind significant price changes. EMA (Exponential Moving Average): Fast EMA: Specifies the number of bars used to calculate the fast EMA. A shorter period results in a more responsive EMA to recent price changes. Slow EMA: Determines the number of bars used to calculate the slow EMA. A longer period results in a smoother EMA but might lag behind recent price changes. VWAP (Volume Weighted Average Price): Default settings are typically used for VWAP calculations, which consider the volume traded at each price level over a specific period. This indicator provides insights into the average price weighted by trading volume. backtest range and rules: You can specify the start date for backtesting purposes. You can can select the desired trade direction: Long, Short, or Both. Entry and Exit Conditions: LONG: DMI Cross Up: The Directional Movement Index (DMI) indicates a bullish trend when the positive directional movement (+DI) crosses above the negative directional movement (-DI). Bollinger Bands (BB): The price is below the upper Bollinger Band, indicating a potential reversal from the upper band. Momentum Indicator: Momentum is positive, suggesting increasing buying pressure. MACD (Moving Average Convergence Divergence): The MACD line is above the signal line, indicating bullish momentum. Supertrend Indicator: The Supertrend indicator signals an uptrend. Schaff Trend Cycle (STC): The STC indicates a bullish trend. Aroon Indicator: The Aroon indicator signals a bullish trend or crossover. When all these conditions are met simultaneously, the strategy considers it a favorable opportunity to enter a long trade. SHORT: DMI Cross Down: The Directional Movement Index (DMI) indicates a bearish trend when the negative directional movement (-DI) crosses above the positive directional movement (+DI). Bollinger Bands (BB): The price is above the lower Bollinger Band, suggesting a potential reversal from the lower band. Momentum Indicator: Momentum is negative, indicating increasing selling pressure. MACD (Moving Average Convergence Divergence): The MACD line is below the signal line, signaling bearish momentum. Supertrend Indicator: The Supertrend indicator signals a downtrend. Schaff Trend Cycle (STC): The STC indicates a bearish trend. Aroon Indicator: The Aroon indicator signals a bearish trend or crossover. When all these conditions align, the strategy considers it an opportune moment to enter a short trade. Disclaimer: THIS ISN'T AN OPTIMAL STRATEGY AT ALL! It was just an old project from when I started learning pine script! The backtest doesn't promise the same results in the future, always do both in-sample and out-of-sample testing when backtesting a strategy. And make sure you forward test it as well before implementing it! Furthermore this strategy uses both trend and mean-reversion systems, that is usually a no-go if you want to build robust trend systems . Don't hesitate to comment if you have any questions or if you have some good notes for a beginner.
Strategia Pine Script™
di IkkeOmar
ATR Bands with Optional Risk/Reward Colors█ OVERVIEW This indicator projects ATR bands and, optionally, colors them based on a risk/reward advantage for those who trade breakouts/breakdowns using moving averages as partial or full exit points. █ DEFINITIONS ► True Range The True Range is a measure of the volatility of a financial asset and is defined as the maximum difference among one of the following values: - The high of the current period minus the low of the current period. - The absolute value of the high of the current period minus the closing price of the previous period. - The absolute value of the low of the current period minus the closing price of the previous period. ► Average True Range The Average True Range was developed by J. Welles Wilder Jr. and was introduced in his 1978 book titled "New Concepts in Technical Trading Systems". It is calculated as an average of the true range values over a certain number of periods (usually 14) and is commonly used to measure volatility and set stop-loss and profit targets (1). For example, if you are looking at a daily chart and you want to calculate the 14-day ATR, you would take the True Range of the previous 14 days, calculate their average, and this would be the ATR for that day. The process is then repeated every day to obtain a series of ATR values over time. The ATR can be smoothed using different methods, such as the Simple Moving Average (SMA), the Exponential Moving Average (EMA), or others, depending on the user's preferences or analysis needs. ► ATR Bands The ATR bands are created by adding or subtracting the ATR from a reference point (usually the closing price). This process generates bands around the central point that expand and contract based on market volatility, allowing traders to assess dynamic support and resistance levels and to adapt their trading strategies to current market conditions. █ INDICATOR ► ATR Bands The indicator provides all the essential parameters for calculating the ATR: period length, time frame, smoothing method, and multiplier. It is then possible to choose the reference point from which to create the bands. The most commonly used reference points are Open, High, Low, and Close, but you can also choose the commonly used candle averages: HL2, HLC3, HLCC4, OHLC4. Among these, there is also a less common "OC2", which represents the average of the candle body. Additionally, two parameters have been specifically created for this indicator: Open/Close and High/Low. With the "Open/Close" parameter, the upper band is calculated from the higher value between Open and Close, while the lower one is calculated from the lower value between Open and Close. In the case of bullish candles, therefore, the Close value is taken as the starting point for the upper band and the Open value for the lower one; conversely, in bearish candles, the Open value is used for the upper band and the Close value for the lower band. This setting can be useful for precautionally generating broader bands when trading with candlesticks like hammers or inverted hammers. The "High/Low" parameter calculates the upper band starting from the High and the lower band starting from the Low. Among all the available options, this one allows drawing the widest bands. Other possible options to improve the drawing of ATR bands, aligning them with the price action, are: • Doji Smoothing: When the current candle is a doji (having the same Open and Close price), the bands assume the values they had on the previous candle. This can be useful to avoid steep fluctuations of the bands themselves. • Extend to High/Low: Extends the bands to the High or Low values when they exceed the value of the band. • Round Last Cent: Expands the upper band by one cent if the price ends with x.x9, and the lower band if the price ends with x.x1. This function only works when the asset's tick is 0.01. ► Risk/Reward Advantage The indicator optionally colors the ATR bands after setting a breakpoint, one or two risk/reward ratios, and a series of moving averages. This function allows you to know in advance whether entering a trade can provide an advantage over the risk. The band is colored when the ratio between the distance from the break point to the band and the distance from the break point to the first available moving average reaches at least the set ratio value. It is possible to set two colorings, one for a minimum risk/reward ratio and one for an optimal risk/reward ratio. The break point can be chosen between High/Low (High in case of breakout, Low in case of breakdown) or Open/Close (on breakouts, Close with bullish candles or Open with bearish candles; on breakdowns, Close with bearish candles or Open with bullish candles). It is possible to choose up to 10 moving averages of various types, including the VWAP with the Anchor Period (2). Depending on the "Price to MA" setting, the bands can be individually or simultaneously colored. By selecting "Single Direction," the risk/reward calculation is performed only when all moving averages are above or below the break point, resulting in only one band being colored at a time. For this reason, when the break point is in between the moving averages, the calculation is not executed. This setting can be useful for strategies involving price movement from a level towards a series of specific moving averages (for example, in reversals starting from a certain level towards the VWAP with possible partial take profits on some previous moving averages, or simply in trend following towards one or more moving averages). Choosing "Both Directions" the risk/reward ratio is calculated based on the first available moving averages both above and below the price. This setting is useful for those who operate in range bound markets or simply take advantage of movements between moving averages. █ NOTE This script may not be suitable for scalping strategies that require immediate entries due to the inability to know the ATR of a candle in advance until its closure. Once the candle is closed, you should have time to place a stop or stop-limit order, so your strategy should not anticipate an immediate start with the next candle. Even more conveniently, if your strategy involves an entry on a pullback, you can place a limit order at the breakout level. (1) www.tradingview.com (2) For convenience, the code for the Anchor Period has been entirely copied from the VWAP code provided by TradingView.
Indicatore Pine Script™
di valpatrad
Market Internals (TICK, ADD, VOLD, TRIN, VIX)OVERVIEW This script allows you to perform data transformations on Market Internals, across exchanges, and specify signal parameters, to more easily identify sentiment extremes. Notable transformations include: 1. Cumulative session values 2. Directional bull-bear Ratios and Percent Differences 3. Data Normalization 4. Noise Reduction This kind of data interaction is very useful for understanding the relationship between two mutually exclusive metrics, which is the essence of Market Internals: Up vs. Down. Even so, they are not possible with symbol expressions alone. And the kind of symbol expression needed to produce baseline data that can be reliably transformed is opaque to most traders, made worse by the fact that prerequisite symbol expressions themselves are not uniform across symbols. It's very nuanced, and if this last bit was confusing … exactly. All this to say, rather than forcing that burden onto you, I've baked the baseline symbol expressions into the indicator so: 1) the transform functions consistently ingest the baseline data in the correct format and 2) you don't have to spend time trying to figure it all out. Trading is hard. There's no need to make it harder. INPUTS Indicator Allows you to specify the base Market Internal and Exchange data to use. The list of Market Internals is simplified to their fundamental representation (TICK, ADD, VOLD, TRIN, VIX, ABVD, TKCD), and the list of Exchange data is limited to the most common (NYSE, NASDAQ, All US Stocks). There are also options for basic exchange combinations (Sum or Average of NYSE & NASDAQ). Mode Short for "Plot Mode", this is where you specify the bars style (Candles, Bars, Line, Circles, Columns) and the source value (used for single value plots and plot color changes). Scale This is the first and second data transformation grouped together. The default is to show the origin data as it might appear on a chart. You can then specify if each bar should retain it's unique value (Bar Value) or be added to a running total (Cumulative). You can also specify if you would like the data to remain unaltered (Raw) or converted to a directional ratio (Ratio) or a percentage (Percent Diff). These options determine the scale of the plot. Both Ratio and Percent Diff. convert a given symbol into a positive or negative number, where positive numbers are bullish and negative numbers are bearish. Ratio will divide Bull values by Bear values, then further divide -1 by the quotient if it is less than 1. For example, if "0.5" was the quotient, the Ratio would be "-2". Percent Diff. subtracts Bear values from Bull values, then divides that difference by the sum of Bull and Bear values multiplied by 100. If a Bull value was "3" and Bear value was "7", the difference would be "-4", the sum would be "10", and the Percent Diff. would be "-40", as the difference is both bearish and 40% of total. Ratio Norm. Threshold This is the third data transformation . While quotients can be less than 1, directional ratios are never less than 1. This can lead to barcode-like artifacts as plots transition between positive and negative values, visually suggesting the change is much larger than it actually is. Normalizing the data can resolve this artifact, but undermines the utility of ratios. If, however, only some of the data is normalized, the artifact can be resolved without jeopardizing its contextual usefulness. The utility of ratios is how quickly they communicate proportional differences. For example, if one side is twice as big as the other, "2" communicates this efficiently. This necessarily means the numerical value of ratios is worth preserving. Also, below a certain threshold, the utility of ratios is diminished. For example, an equal distribution being represented as 0, 1, 1:1, 50/50, etc. are all equally useful. Thus, there is a threshold, above which we want values to be exact, and below which the utility of linear visual continuity is more important. This setting accounts for that threshold. When this setting is enabled, a ratio will be normalized to 0 when 1:1, scaled linearly toward the specified threshold when greater than 1:1, and then retain its exact value when the threshold is crossed. For example, with a threshold of "2", 1:1 = 0, 1.5:1 = 1, 2:1 = 2, 3:1 = 3, etc. With all this in mind, most traders will want to set the ratios threshold at a level where accuracy becomes more important than visual continuity. If this level is unknown, "2" is a good baseline. Reset cumulative total with each new session Cumulative totals can be retained indefinitely or be reset each session. When enabled, each session has its own cumulative total. When disabled, the cumulative total is maintained indefinitely. Show Signal Ranges Because everything in this script is designed to make identifying sentiment extremes easier, an obvious inclusion would be to not only display ranges that are considered extreme for each Market Internal, but to also change the color of the plot when it is within, or beyond, that range. That is exactly what this setting does. Override Max & Min While the min-max signal levels have reasonable defaults for each symbol and transformation type, the Override Max and Override Min options allow you to … (wait for it) … override the max … and min … signal levels. This may be useful should you find a different level to be more suitable for your exact configuration. Reduce Noise This is the fourth data transformation . While the previous Ratio Norm. Threshold linearly stretches values between a threshold and 0, this setting will exponentially squash values closer to 0 if below the lower signal level. The purpose of this is to compress data below the signal range, then amplify it as it approaches the signal level. If we are trying to identify extremes (the signal), minimizing values that are not extreme (the noise) can help us visually focus on what matters. Always keep both signal zones visible Some traders like to zoom in close to the bars. Others prefer to keep a wider focus. For those that like to zoom in, if both signals were always visible, the bar values can appear squashed and difficult to discern. For those that keep a wider focus, if both signals were not always visible, it's possible to lose context if a signal zone is vertically beyond the pane. This setting allows you to decide which scenario is best for you. Plot Colors These define the default color, within signal color, and beyond signal color for Bullish and Bearish directions. Plot colors should be relative to zero When enabled, the plot will inherit Bullish colors when above zero and Bearish colors when below zero. When disabled and Directional Colors are enabled (below), the plot will inherit the default Bullish color when rising, and the default Bearish color when falling. Otherwise, the plot will use the default Bullish color for all directions. Directional colors When the plot colors should be relative to zero (above), this changes the opacity of a bars color if moving toward zero, where "100" percent is the full value of the original color and "0" is transparent. When the plot colors are NOT relative to zero, the plot will inherit Bullish colors when rising and Bearish colors when falling. Differentiate RTH from ETH Market Internal data is typically only available during regular trading hours. When this setting is enabled, the background color of the indicator will change as a reminder that data is not available outside regular trading hours (RTH), if the chart is showing electronic trading hours (ETH). Show zero line Similar to always keeping signal zones visible (further up), some traders prefer zooming in while others prefer a wider context. This setting allows you to specify the visibility of the zero line to best suit your trading style. Linear Regression Polynomial regressions are great for capturing non-linear patterns in data. TradingView offers a "linear regression curve", which this script is using as a substitute. If you're unfamiliar with either term, think of this like a better moving average. Symbol While the Market Internal symbol will display in the status line of the indicator, the status line can be small and require more than a quick glance to read properly. Enabling this setting allows you to specify if / where / how the symbol should display on the indicator to make distinguishing between Market Internals more efficient. Speaking of symbols, this indicator is designed for, and limited to, the following … TICK - The TICK subtracts the total number of stocks making a downtick from the total number of stocks making an uptick. ADD - The Advance Decline Difference subtracts the total number of stocks below yesterdays close from the total number of stocks above yesterdays close. VOLD - The Volume Difference subtracts the total declining volume from the total advancing volume. TRIN - The Arms Index (aka. Trading Index) divides the ratio of Advancing Stocks / Volume by the ratio of Declining Stocks / Volume. Given the inverse correlation of this index to market movement, when transforming it to a Ratio or Percent Diff., its values are inverted to preserve the bull-bear sentiment of the transformations. VIX - The CBOE Volatility Index is derived from SPX index option prices, generating a 30-day forward projection of volatility. Given the inverse correlation of this index to market movement, when transforming it to a Ratio or Percent Diff., its values are inverted and normalized to the sessions first bar to preserve the bull-bear sentiment of the transformations. Note: If you do not have a Cboe CGIF subscription , VIX data will be delayed and plot unexpectedly. ABVD - The Above VWAP Difference is an unofficial index measuring all stocks above VWAP as a percent difference. For the purposes of this indicator (and brevity), TradingViews PCTABOVEVWAP has has been shortened to simply be ABVD. TKCD - The Tick Cumulative Difference is an unofficial index that subtracts the total number of market downticks from the total number of market upticks. Where "the TICK" (further up) is a measurement of stocks ticking up and down, TKCD is a measurement of the ticks themselves. For the purposes of this indicator (and brevity), TradingViews UPTKS and DNTKS symbols have been shorted to simply be TKCD. INSPIRATION I recently made an indicator automatically identifying / drawing daily percentage levels , based on 4 assumptions. One of these assumptions is about trend days. While trend days do not represent the majority of days, they can have big moves worth understanding, for both capitalization and risk mitigation. To this end, I discovered: • Article by Linda Bradford Raschke about Capturing Trend Days. • Video of Garrett Drinon about Trend Day Trading. • Videos of Ryan Trost about How To Use ADD and TICK. • Article by Jason Ruchel about Overview of Key Market Internals. • Including links to resources outside of TradingView violates the House Rules, but they're not hard to find, if interested. These discoveries inspired me adopt the underlying symbols in my own trading. I also found myself wanting to make using them easier, the net result being this script. While coding everything, I also discovered a few symbols I believe warrant serious consideration. Specifically the Percent Above VWAP symbols and the Up Ticks / Down Ticks symbols (referenced as ABVD and TKCD in this indicator, for brevity). I found transforming ABVD or TKCD into a Ratio or Percent Diff. to be an incredibly useful and worthy inclusion. ABVD is a Market Breadth cousin to Brian Shannon's work, and TKCD is like the 3rd dimension of the TICKs geometry. Enjoy.
Indicatore Pine Script™
di liquid-trader
67
[Round Numbers] Signal Clean Up Analysis with Backtest (TSO)Round Numbers NEW GEN indicator! =========================================================================== =========================================================================== This is a full-cycle trading system indicator - it will show and alert each step of the trade from open to close. The algorithm here uses Round Numbers for generating signals, TP (Take Profit) and SL (Stop Loss) levels. Round numbers play big role in trading and can easily become strong support and resistance levels where price can bounce and go the opposite way or go through with a very nice run afterwards. In addition there is a chained (NOTE: You can select several or ALL of the features, this is not limited to either one) signal cleanup and analysis approach with scheduling and alerting capabilities. Works with most popular timeframes: 1M, 3M, 5M, 15M, 30M, 1H, 4H, D. NOTE: Every action of the trade is calculated on a confirmed closed candle bar state (barstate.isconfirmed), so the indicator will never repaint! NOTE: At position open - there will be calculated Take-Profit and Stop-Loss targets, however each target is considered hit, when candle bar closes breaking that target, so Take-Profit and Stop-Loss when hit will slightly differ then what you see at trade/position open. =========================================================================== =========================================================================== Round Numbers up|down unit setting and overall explanation --------------------------------------------------------------------------- Round Number up|down unit: is the distance between round numbers on the chart. Since these round number levels are also used by the algorithm to open/close trades, it is important to set this setting to a logical number, which will correspond to an average price movement of the instrument. Here are some examples for a few popular instruments on what will the default 1 round number unit correspond to and what would be suggested: BTCUSD > $1 (this won't work for Bitcoin, try at least $100 - 100units) SPY: > $1 (one of the best settings for SPY or QQQ, 50cents shows good results as well - 0.5units) FOREX (all major pairs): > 10PIPs (that may be a bit small, unless scalping, try 50PIPs - 5units) =========================================================================== =========================================================================== Explanation of all the Features | Strategy Configuration Guide | Indicator Settings | Signal Cleanup Analysis --------------------------------------------------------------------------- >>> Customizable Backtesting for a specific date range, results via TradingView strategy, which includes “Deep Backtesting” for largest amounts of data on trading results. >>> Trading Schedule with customizable trading daily time range, automatic closing/alert trades before Power Hour or right before market closes or leave it open until next day. >>> 3 Trading Systems. >>> Static/Dynamic/Trailing Take-Profit and Stop-Loss setups (HIGHLIGHT: Stop-Loss will be moved to Entry after TP1 is taken or a smart trailing Stop-Loss can be used with Stop-Loss dynamically following the trade to minimize risk). >>> Single or Multiple profit targets (up to 5). >>> Take-Profit customizable offset feature (set your Take-Profit targets slightly before everyone is expecting it!). >>> Candle bar signal analysis (matching candle color, skip opposite structured and/or doji candle uncertain signals). >>> Additional analysis of VWAP/EMA/ATR/EWO (Elliot Wave Oscillator)/Divergence MACD+RSI/Volume signal confirmation (clean up your chart with indicator showing only the best potential signals!). >>> Advanced Alerts setup, which can be potentially setup with a trading bot over TradingView Webhook (NOTE: This will require advanced programming knowledge). =========================================================================== Labels, plots, colors explanations: --------------------------------------------------------------------------- >>>>> LONG open: green "house" looking arrow below candle bar. >>>>> SHORT open: red "house" looking arrow above candle bar. >>>>> LONG/SHORT take-profit target: green/red circles (multi-profit > TP2/3/4/5 smaller circles). >>>>> LONG/SHORT stop-loss target: green/red + crosses. >>>>> LONG/SHORT take-profit hits: green/red diamonds. >>>>> LONG/SHORT stop-loss hits: green/red X-crosses. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (profitable trade): green/red squares. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (loss trade): green/red PLUS(+)-crosses. =========================================================================== Date Range and Trading Schedule Settings --------------------------------------------------------------------------- >>>>> Date Range: Select your start and/or end dates (uncheck “End” for indicator to show results up to the very moment and to use for LIVE trading) for backtesting results, if not using backtesting – uncheck “Start”/“End” to turn it off. >>>>> Use TradingView “Strategy Tester” to see backtesting results NOTE: If Strategy Tester does not show any results with Date Ranged fully unchecked, there may be an issue where a script opens a trade, but there is not enough TradingView power to set the Take-Profit and Stop-Loss and somehow an open trade gets stuck and never closes, so there are “no trades present”. In such case you will need to manually check “Start”/“End” dates or use “Depp Backtesting” feature! >>>>> Trading Schedule: This is where you can setup Intraday Session or any custom session schedule you wish. Turn it ON. Select trading hours. Select EOD (End of Day) setting (NOTE: If it will be OFF, the indicator will assume you are holding your position open until next day!). Please note the EOD trade closure times with the 2 different Intraday close settings when turned on: At Market Close: 1/3/5min > will close at 15:55pm ET 15min > will close at 15:45pm ET 30min > will close at 15:30pm ET 45min > will close at 15:45pm ET 60min > will close at 15:00pm ET Before Power Hour: 1/3/5min > will close at 15:00pm ET 15min > will close at 15:00pm ET 30min > will close at 15:00pm ET 45min > will close at 15:00pm ET 60min > will close at 15:00pm ET >>> Trading Systems: 1) "Open Until Closed by TP or SL": the signal will only open a trade if no trades are currently open/trunning, a trade can only be closed by Take Profit, Stop Loss or End of Day close (if turned on) | 2) "Open Until Closed by TP or SL + OCA": Same as 1), but if there is an opposite signal to the trade which is currently open > it will immediately be closed with new trade open or End of Day close (if turned on) | 3) "OCA (no TP or SL)": There are is Take Profit or Stop Loss, only an opposite signal will close current trade and open an opposite one or End of Day close (if turned on). >>> Turn On/Off: Current Position SL + Opposite Position Open Signal on the same closing candle bar (If current trade hits Stop-Loss and at that same closing candle bar there is a signal for an opposite direction trade > indicator will close current position as Stop-Loss and immediately open an opposite position). NOTE: With this option turned on, there will be more trades, but not necessarily better results, since after Stop-Loss is hit, it may make sense to wait a little before opening an opposite trade, even if it matches the condition at the same time when Stop-Loss is hit, but sometimes it shows great results, so this setting/feature is included. NOTE: This setting only will work/make sense with TP and SL style/behavior both be set to "Fully Closed Candle"! >>> Turn On/Off: Turn On/Off: Current Position REGULAR SL | Only the SL + Opposite Position Open will trigger if turned on, IF NOT - THERE WILL BE NO STOP-LOSS AT ALL!!! NOTE: It is very dangerous to trade without Stop-Loss! >>>>> Signal Candle Bar consuming Take-Profits - position/trade signal candle bar is big enough to "consume"/close ahead the first TP setting > the signal can either be skipped, or all Take-Profit areas pushed ahead using smart formula) >>>>> MULTIPROFIT | TP (Take-Profit) System: 1) Static – Once the trade is open, all Take-Profit target(s) are immediately calculated and set for the trade > once the target(s) is hit > trade will be partially closed (if candle bar closes beyond several Take-Profit targets > trade will be reduced accordingly to the amount of how many Take-Profit targets were hit) ||| 2) Dynamic – Once the trade is open, only the 1st Take-Profit target is calculated, once the 1st Take-Profit is hit > next Take-Profit distance is calculated based on the distance from trade Entry to where 1st Take-Profit was taken, once 2nd Take-Profit is taken > 3rd Take-Profit is calculated per same logic, these are good for price momentum as with price speeding up – profits increase as well! >>>>> MULTIPROFIT: SL (stop loss) System | Static: SL is set at position open and remains such; Dynamic: Once ANY TP is taken > SL will be moved to Entry; Trailing: SL will be moved along the position (smart trailing stop-loss), at TP1 taken > SL moves to Entry, at TP2 taken > SL moves to TP1, at TP3 taken > SL moves to TP2 and so on. >>>>> # of TPs (number of take profit targets): Just like it is named, this is where you select the number of Take-Profit targets for your trading system (NOTE: If "OCA (no TP or SL)" Trading System is selected, this setting won’t do anything, since there are no TP or SLs for that system). >>>>> TP(s) offset: This is a special feature for all Take-Profit targets, where you can turn on a customizable offset, so that if the price is almost hitting the Take-Profit target, but never actually touches it > you will capture it. This is good to use with HHLL (Highest High Lowest Low), which is pretty much a Support/Resistance as often the price will nearly touch these strong areas and turn around… =========================================================================== Dynamic/Static/Trailing Take-Profit and Stop-Loss visual examples: --------------------------------------------------------------------------- 1) Fully Static Take-Profit and Stop-Loss This one is a fully static setup for both Take-Profit and Stop-Loss, you can also observe how trade is closed right before the Power Hour (trade can be closed right before Power Hour or right before Market Closes or left overnight as desired). 2) Static/Dynamic, Static Take-Profit and Dynamic Stop-Loss You can see a static Take-Profit set at position open, while Stop-Loss moves to Entry once TP1 target is taken. 3) Static/Trailing, Static Take-Profit and Trailing Stop-Loss In here with each Take-Profit taken, Stop-Loss moves along the trade to previous Take-Profit level, you can notice how stop-loss literally follows the trade and reduces the potential loss. 4) Dynamic/Trailing, Dynamic Take-Profit and Trailing Stop-Loss See how Take-Profit distances increase with price momentum. Just like in previous example - Trailing Stop-Loss is following the trade and reducing the riks. =========================================================================== Signal Analysis and Cleanup Settings --------------------------------------------------------------------------- >>>>> Candle Analysis | Candle Color signal confirmation: If closed candle bar color does not match the signal direction > no trade will be open. >>>>> Candle Analysis | Skip opposite candle signals: If closed candle bar color will match the signal direction, but candle structure will be opposite (for example: bearish green hammer, long high stick on top of a small green square) > no trade will be open. >>>>> Candle Analysis | Skip doji candle signals: If closed candle bar will be the uncertain doji > no trade will be open. >>>>> Divergence/Oscillator Analysis | EWO (Elliot Wave Oscillator) signal confirmation: LONG will only be open if at signal, EWO is green or will be at bullish slope (you can select which setting you desire), SHORT if EWO is red or will be at bearish slope. >>>>> Divergence/Oscillator Analysis | VWAP signal confirmation: LONG will only be open if at signal, the price will be above VWAP, SHORT if below. >>>>> Divergence/Oscillator Analysis | Moving Average signal confirmation: LONG will only be open if at signal, the price will be above selected Moving Average, SHORT if below. >>>>> Divergence/Oscillator Analysis | ATR signal confirmation: LONG will only be open if at signal, the price will be above ATR, SHORT if below. >>>>> Divergence/Oscillator Analysis | RSI + MACD signal confirmation: LONG will only be open if at signal, RSI + MACD will be bullish, SHORT if RSI + MACD will be bearish. >>>>> Volume signal confirmation: LONG/SHORT will only be opened with strong Volume matching the signal direction, by default, strong Volume percentage is set to 150% and weak to 50%, but you can change it as you desire. =========================================================================== ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| TP System - VERY IMPORTANT INFO! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" - amount by which current trade/position needs to be reduced/partially closed/sold. ------------------------------------------------------------------------------------------------------------------- TP System: Dynamic "TP PERCENTAGE" - will always be the same amount (trade/position size divided by the # of take-profit(TP) targets) and percentage to be closed will always be of the ORIGINAL trade/position. ------------------------------------------------------------------------------------------------------------------- TP System: Static "TP PERCENTAGE" - will always be the same amount IF take-profit(TP) targets are hit 1-by-1 (TP1 > TP2 > TP3 > TP4 > TP5), otherwise it will vary and unless it is a 1st take-profit(TP1), the REMAINING trade/position size will always be smaller than original and therefore the percentage to be closed will always be of the REMAINING trade/position and NOT the original one! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" CheatSheet (these are the only percentages you may see) ----------------------------------------------------------------------- TP PERCENTAGE---Close/Sell Amount-------------Example (trade size: 50 stocks) 20%-------------trade size * 0.2--------------50 * 0.2 = 10 stocks 25%-------------trade size * 0.25-------------50 * 0.25 = 12.5(~13) stocks 34%-------------trade size * 0.34-------------50 * 0.34 = 17 stocks 40%-------------trade size * 0.4--------------50 * 0.4 = 20 stocks 50%-------------trade size * 0.5--------------50 * 0.5 = 25 stocks 60%-------------trade size * 0.6--------------50 * 0.6 = 30 stocks 66%-------------trade size * 0.66-------------50 * 0.66 = 33 stocks 75%-------------trade size * 0.75-------------50 * 0.75 = 37.5(~38) stocks 80%-------------trade size * 0.8--------------50 * 0.8 = 40 stocks 100%------------trade size--------------------50 = 50 stocks ----------------------------------------------------------------------- If for any reason a portion of the current/remaining trade closed at such occurrence was slightly wrong, it is not an issue. Such occurrences are rare and with slight difference in partial TP closed is not significant to overall performance of our algorithms. ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| Alert Settings (you don’t have to touch this section unless you will be using TradingView alerts through a Webhook to use with trading bot) --------------------------------------------------------------------------- Here is how a LONG OPEN alert looks like. NOTE: Each label , , etc. is customizable, you can change the text of it within indicator Input settings. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: OPEN ENTRY: 20000 TP1: 20500 TP2: 21000 TP3: 21500 TP4: 22500 TP5: 23500 SL: 19000 Leverage: 0 --------------------------------------------------------------------------- Here is how a TP1 alert will look with 5 TPs breakdown of the trade. NOTE1: Next to TP1 taken it will show at which price it was triggered. NOTE2: Next to "TP Percentage" it shows how much of the CURRENT/ACTIVE/REMAINING trade needs to be closed. NOTE2: If TP2/3/4/5 comes before TP1 - the alert will tell you exactly how many percent of the trade needs to be closed! ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: TP1 TP1: 20500 TP Percentage: 20% --------------------------------------------------------------------------- Here is how an alert will look for LONG - STOP-LOSS. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M ENTRY: 20000 LONG: SL SL: 19000 --------------------------------------------------------------------------- Here is how an alert will look for LONG - EOD (End of Day) In Profit close. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: EOD-Close (profit) ENTRY: 20000 EOD-Close: 21900 =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- -Add indicator to chart and make sure the correct strategy is configured (check Backtesting results) -Right-click anywhere on the TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Immediately below, change it to "alert() function calls only", as other wise there will be 2 alerts for every alert! -Expiration: Open-ended (that may require higher tier TradingView account, otherwise the alert will need to be occasionally re-triggered) -Alert name: Whatever you desire -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, past performance is not necessarily indicative of future results, so please trade responsibly!) --------------------------------------------------------------------------- NOTE: There seems to be a strange glitch when strategy is running live, it will show "double-take" take-profits labels on the chart. This is not affecting the script logic and backtesting results, if you simply change the timeframe real quick to something else then back - it will no longer show the duplicate orders... this must be some sort of a glitch as every alert was thoroughly tested to make sure everything is working!
Strategia Pine Script™
di tso_trade
5
Omega AnalystThe Omega Analyst is a toolkit designed to help both experienced and new traders with their trading decisions. This indicator is a part of the omega toolkit, and his creation method is based on the concept that every trading strategy should have a way to determine the trend, or the bias, that answers the question “long or short?”; the location, which identifies the best price level to enter into a position and to exit, both in profit and in loss, and that will decide the final risk-to-reward ratio of the trade you take; the signal, which is useful to determine the best moment to enter into a position and that if paired with the trend point, his purpose is to identify when the large trend picture is in confluence with the small term; and last but not least the filter point, the filter is used to have another way to have an additional confluence with the trade you want to take, and it’s important to reduce the number of false signals and to increase the win rate. This tool aims to help traders with the identification of the location points, thanks to different technical analysis tools that allow determining objectively if the price is in a discount area or in a premium area, to evaluate both entry and exit points. It’s important to note that indicator and technical analysis is only one of the several different ways to analyze an asset. One of the main things to keep in mind when working with the financial markets is that not every asset, every historical phase, and every market condition is the same, this is why this tool can be highly personalized and adjustable and provide different overlay tools in order to allow traders to choose the best settings considering this variable and your backtests. This tool, thanks to the previously cited characteristics, can work on any market and any horizontal time frame, and it has different features: - 7 different tools of technical analysis to analyze the market, some of them with multiple variants. - An additional tool to display the open price of different sessions - Easy setup: You can easily choose which indicator to display in order to analyze the markets the best. - Easy to use and easy to adjust: common settings for all the indicators are easily configurable in the settings with the length or the size parameter. Note that not all the indicators use both parameters, in particular: the indicator mode works for the consolidation levels, the range of motion, the sr zones, and the regression line; the continuous length parameter changes the settings to the consolidation levels, the range of motion, the sr zones, the Fibonacci area, and the regression line; the interval size parameter change the anchor to the volume price, the pivot points and the range of motion. - Common aesthetics: You can easily change the default premium, discount, and average color in order to have the best view of the indicators together with the line width, or choose to have the monochrome setting to have a more minimalistic style. - Common usage: Every one of these uses has the same functionality: determine if the price is the fair value, in a premium situation, or in the discount area. - Automatic settings: The indicator can be used in “Auto” mode if it works with resets like the range of motion interval, the VWAP, the pivot points, and the open prices. This way the indicator will automatically adjust itself to show the optimal results for the analysis you want to make on your chosen timeframe. The first tool is called Consolidation levels, and it’s a great tool to use during ranging markets. The consolidation levels are support and resistance levels and zones automatically displayed on the chart to identify the range of bargaining, that adapts considering the price volatility and automatically moves once the price has broken the extreme levels. This tool has two variants. The fixed variants have, just like the name says, all fixed levels that stay the same until the price doesn’t break one of them. The Adaptive variants of the Consolidation levels tool have a unique feature that makes the support and resistance zones move considering the price volatility and standard deviation. The second tool is called “Range of Motion” and it comes in two different versions, called “Continuous” and “Interval”. The difference is just that the “Interval” version stays the same for the whole duration of the interval length you choose. The range of motion indicator allows the user to see the level that works like support and resistance and the area that works like premium and discount areas. The levels are calculated using the ATR indicator on the mean center line. On the fixed variant of the range of motion indicator, these levels, once plotted, stay the same until the end of the chosen time frame in the interval size setting to plot the indicator. This way it’s easier to adopt a kind of analysis that uses passive orders like limit buy and limit sell orders. The interval range of motion indicator works like fixed extension levels that display the optimal range of bargaining of that specific asset. The third tool is the Support and Resistance zones. With this tool, you'll see automatic support and resistance based on past prices and pivot data. The area and the least efficient levels can be disabled using the "Interval" indicator mode. The color area automatically changes looking at the effective support or resistance purpose of that area. The area also changes with the "Continuous length" parameter. The fourth tool is the Fibonacci zones, which display the area of discount and premium pricing using the quartile theory, showing the 25% and the 75% of the current swings as area and the golden zone as a standard line, that includes the space between the 61.8% and the 38.2%, with the 50% line in the middle. This tool works like a Donchian Channel but it shows areas instead of simple lines. The usage of this indicator is both for trend following and for mean reversal, the general definition is that it shows attention zones. Now in the photo, you can see the fifth tool which is the Anchored VWAP, under the name of "Volume Price". The Volume-weighted average price is a powerful indicator that aims to give the average price of a determined time period and can be used, combined with the standard deviation, to find not only support and resistance levels but also the volume-objective premium and discount zone. This specific indicator displays 5 lines: the VWAP, the first upper and lower deviation, and the first and second upper deviation lines, that create the previously mentioned zone. The sixth tool is the Pivot Points standard. This tool is a popular indicator that displays key levels for a determined period of time. The levels for each interval time are five different lines. The middle one, colored by default in gray, should be the prediction, based on the key price levels of the previous period chosen, of the fair value. The other one, called S1 and R1 are respectively the first level of support and resistance and are great if used as exit points and when combined with other S/R tools, the same is valid for the S2 and R2 levels, on the extreme part of the indicator. Between the R1 and the R2, and between the S1 and S2 lines there are the previously mentioned Discount and Premium zones. The seventh tool is the Regression Line. This indicator will show the deviation bands from the standard regression line. Given the fact that the usual linear regression channels available are repainting, and so they don't give realistic outcomes, this tool will give you past results based on the data of the channel in that price moment, being non-repainting. This tool also has an extension that aims to be a prediction about future outcomes in terms of volatility and direction of the price, and this extension can be disabled using the "Continuous" mode. Just like other tools in this indicator, the linear regression channel will display the middle line and the two premium and discount zones. The last tool of the Omega Analyst is the open prices. With this simple-to-read tool, you will see plotted as dotted lines the open prices of the period you have chosen. The open prices are common support and resistance level and can be used both for entry and exit points. Additionally, on higher timeframes, such as the open prices of the different months, these levels can be further extended to the recent days to have more support and resistance levels. This tool needs to be adjusted based on your time zone in order to have the best results and can be done directly in the settings of the indicator under the Open prices section, just simply write down at what time it’s midnight in your country watching the desired hour on the chart. In order to determine the premium or discount area with this tool, you’ll need to pay attention if the current open price indicator is higher or lower than the previous one plotted, if it’s higher you can assume that the price is in an up trend and this way the zone under the current dotted line is the discount zone. The lines you’ll see plotted are either in the chosen discount or premium color, based if the price is above or below the current open prices indicator plotted. Risk Disclaimer: All content and scripts provided are purely for informational & educational purposes only and do not constitute financial advice or a solicitation to buy or sell any securities of any type. Past performance does not guarantee future results. Trading can lead to a loss of the invested capital in the financial markets. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Indicatore Pine Script™
di OmegaTools
6
ManipulatorTrade | InfoBarEnglish With this indicator, you can track the instrument selected in the settings, there is also RSI, MACD, Stochastic. The InfoBar will show you overbought or oversold, as well as the trend in MACD. You can track crypto dominance: BTC, ETH, USDT. Also keep an eye on indices and metals. There is VWAP which shows the average price weighted by volume over a certain period. All settings can be changed. Українська За допомогою даного індикатора ви можете відстежувати інструмент вибраний в налаштуваннях, так само є RSI, MACD, Stochastic. InfoBar вам покаже перекупленність або перепроданість, так само тренд в MACD. Ви можете відстежувати крипто домінацію: BTC, ETH, USDT. Так само слідкувати за індексами та металами. Є VWAP, який показує середню ціну, виважену за обсягом за певний період. Усі налаштування можна змінити. Русский С помощью данного индикатора вы можете отслеживать инструмент выбранный в настройках, так же есть RSI, MACD, Stochastic. InfoBar вам покажет перекупленностть или перепроданность, так же тренд в MACD. Вы можете отслеживать крипто доминацию: BTC, ETH, USDT. Так же следить за индексами и металлами. Есть VWAP который показывает среднюю цену, взвешенную по объему за определенный период. Все настройки можно изменить.
Indicatore Pine Script™
di xonebounty2
Buying Selling Volume StrategyFirst I would like to give the original credit and thanks to @ceyhun for his amazing volume script. The way I decided to convert it into a strategy is divided into multiple types. First, I decided in order to smooth out the values and make it more accurate to adapt the values to multiple timeframes. After that I took the initial values from the buyers and sellers , and made a rest operation between them to have a flat difference between the power of both sides. WIth that later on I decided to to apply a volatility filter,in this case bollinger bands, in order to find out potential leading trends. At the same time in order to filter even more, I decided to make use as well for weekly VWAP values of the asset used. Lastly I added a dynamic risk management into it , based on the ATR Daily values of the asset values. As for the rules used, for example for long, I am looking that the price of the asset is above the weekly VWAP, after that I am checking that the MTF volume rest operation is both bullish and above the upper side of the bollinger. For short we would want the asset to be below the weekly VWAP, and the volume to be bearish and above the upper side of bollinger. The exit is either based on daily ATR values multipliers, or if we have a reverse condition. If you have any questions, please let me know !
Strategia Pine Script™
di exlux
[Camarilla Pivots] Signal Clean Up Analysis with Backtest (TSO)Camarilla Pivots NEW GEN Indicator! This is a full-cycle trading system indicator, which uses Camarilla Pivots for generating signals using a custom developed algorithm, TP (Take Profit) and SL (Stop Loss) levels. There are 3 SOURCES for signals (each can be used separately or in combination or all 3 can be used at the same time, each signal SOURCE is using Camarilla Pivots levels to open optimal trade direction) with chained (NOTE: There are many potential profitable setups available, by combining clean up features availabe in the indicator settings!) signal cleanup and analysis approach with scheduling and alerting capabilities. Works best with shorter timeframes: 1M, 5M, 15M, 1H. NOTE: Every calculation is done on a confirmed closed candle bar state, so the indicator will never repaint! NOTE: At position open - there will be calculated Take-Profit and Stop-Loss targets, however each target is considered hit, when candle bar closes breaking that target, so Take-Profit and Stop-Loss when hit will slightly differ then what you see at position open! =========================================================================== Explanation of all the Features | Configuration Guide | Indicator Settings | Signal Cleanup Analysis --------------------------------------------------------------------------- >>> Customizable Backtesting for a specific date range, results via TradingView strategy, which includes “Deep Backtesting” for largest amounts of data on trading results. >>> Trading Schedule with customizable trading daily time range, automatic closing/alert trades before Power Hour or right before market closes or leave it open until next day. >>> 3 Trading Systems. >>> Multiple Signal SOURCEs for opening trades, either SOURCE can be used or both at the same time! >>> Static/Dynamic Stop-Loss setups (HIGHLIGHT: Stop-Loss will be moved to Entry after TP1 is taken, which minimizes risk). >>> Single or Multiple profit targets (up to 5). >>> Take-Profit customizable offset feature (set your Take-Profit targets slightly before everyone is expecting it!). >>> Candle bar signal analysis (matching candle color, skip opposite structured and/or doji candle uncertain signals). >>> Additional analysis of VWAP/EMA/ATR/EWO (Elliot Wave Oscillator)/Divergence MACD+RSI/Volume signal confirmation (clean up your chart with indicator showing only the best potential signals!). >>> Advanced Alerts setup, which can be potentially setup with a trading bot over TradingView Webhook (NOTE: This will require advanced programming knowledge). =========================================================================== Labels, plots, colors explanations: --------------------------------------------------------------------------- >>>>> LONG open: green "house" looking arrow below candle bar. >>>>> SHORT open: red "house" looking arrow above candle bar. >>>>> LONG/SHORT take-profit target: green/red circles (multi-profit > TP2/3/4/5 smaller circles). >>>>> LONG/SHORT stop-loss target: green/red + crosses. >>>>> LONG/SHORT take-profit hits: green/red diamonds. >>>>> LONG/SHORT stop-loss hits: green/red X-crosses. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (profitable trade): green/red squares. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (loss trade): green/red PLUS(+)-crosses. =========================================================================== Date Range and Trading Schedule Settings --------------------------------------------------------------------------- >>>>> Date Range: Select your start and/or end dates (uncheck “End” for indicator to show results up to the very moment and to use for LIVE trading) for backtesting results, if not using backtesting – uncheck “Start”/“End” to turn it off. >>>>> Use TradingView “Strategy Tester” to see backtesting results NOTE: If Strategy Tester does not show any results with Date Ranged fully unchecked, there may be an issue where a script opens a trade, but there is not enough TradingView power to set the Take-Profit and Stop-Loss and somehow an open trade gets stuck and never closes, so there are “no trades present”. In such case you will need to manually check “Start”/“End” dates or use “Depp Backtesting” feature! >>>>> Trading Schedule: This is where you can setup Intraday Session or any custom session schedule you wish. Turn it ON. Select trading hours. Select EOD (End of Day) setting (NOTE: If it will be OFF, the indicator will assume you are holding your position open until next day!). Please note the EOD trade closure times with the 2 different Intraday close settings when turned on: At Market Close: 1/3/5min > will close at 15:55pm ET 15min > will close at 15:45pm ET 30min > will close at 15:30pm ET 45min > will close at 15:45pm ET 60min > will close at 15:00pm ET Before Power Hour: 1/3/5min > will close at 15:00pm ET 15min > will close at 15:00pm ET 30min > will close at 15:00pm ET 45min > will close at 15:00pm ET 60min > will close at 15:00pm ET >>> Trading Systems: 1) "Open Until Closed by TP or SL": the signal will only open a trade if no trades are currently open/trunning, a trade can only be closed by Take Profit, Stop Loss or End of Day close (if turned on) | 2) "Open Until Closed by TP or SL + OCA": Same as 1), but if there is an opposite signal to the trade which is currently open > it will immediately be closed with new trade open or End of Day close (if turned on) | 3) "OCA (no TP or SL)": There are is Take Profit or Stop Loss, only an opposite signal will close current trade and open an opposite one or End of Day close (if turned on). >>> Position Open sources: >>>>> Position Open - SOURCE1 | LONG: S3, SL: S4, TP1: R3, TP2: R4, TP3: R5, TP4/5: Smart Formula | SHORT: R3, SL: R4, TP1: S3, TP2: S4, TP3: S5, TP4/5: Smart Formula >>>>> Position Open - SOURCE2 | LONG: R4, SL: R3, TP1: R5, TP2/3/4/5: Smart Formula | SHORT: S4, SL: S3, TP1: S5, TP2/3/4/5: Smart Formula >>>>> Position Open - SOURCE3 | LONG: R5, SL: R4, TP1/2/3/4/5: Smart Formula | SHORT: S5, SL: S4, TP1/2/3/4/5: Smart Formula >>> Turn On/Off: Current Position SL + Opposite Position Open Signal on the same closing candle bar (If current trade hits Stop-Loss and at that same closing candle bar there is a signal for an opposite direction trade > indicator will close current position as Stop-Loss and immediately open an opposite position). NOTE: With this option turned on, there will be more trades, but not necessarily better results, since after Stop-Loss is hit, it may make sense to wait a little before opening an opposite trade, even if it matches the condition at the same time when Stop-Loss is hit, but sometimes it shows great results, so this setting/feature is included. >>> Turn On/Off: Turn On/Off: Current Position REGULAR SL | Only the SL + Opposite Position Open will trigger if turned on, IF NOT - THERE WILL BE NO STOP-LOSS AT ALL!!! NOTE: It is very dangerous to trade without Stop-Loss! >>>>> Signal Candle Bar consuming Take-Profits - position/trade signal candle bar is big enought to "consume"/close ahead the first TP setting > the signal can either be skipped, or all Take-Profit areas pushed ahead using smart formula) >>>>> MULTIPROFIT | TP (Take-Profit) System: Once the trade is open, all Take-Profit target(s) are immediately calculated and set for the trade > once the target(s) is hit > trade will be partially closed (if candle bar closes beyond several Take-Profit targets > trade will be reduced accordingly to the amount of how many Take-Profit targets were hit) >>>>> MULTIPROFIT | SL (Stop-Loss) System: 1) Static – Once the trade is open, Stop-Loss is calculated and set for the remaining of the trade ||| 2) Dynamic – At trade open, Stop-Loss is calculated and set the same way, however once 1st Take-Profit is taken > Stop-Loss is moved to Entry, reducing the risk. >>>>> # of TPs (number of take profit targets): Just like it is named, this is where you select the number of Take-Profit targets for your trading system (NOTE: If "OCA (no TP or SL)" Trading System is selected, this setting won’t do anything, since there are no TP or SLs for that system). >>>>> TP(s) offset: This is a special feature for all Take-Profit targets, where you can turn on a customizable offset, so that if the price is almost hitting the Take-Profit target, but never actually touches it > you will capture it. This is good to use with HHLL (Highest High Lowest Low), which is pretty much a Support/Resistance as often the price will nearly touch these strong areas and turn around… =========================================================================== Signal Analysis and Cleanup Settings --------------------------------------------------------------------------- >>>>> Candle Analysis | Candle Color signal confirmation: If closed candle bar color does not match the signal direction > no trade will be open. >>>>> Candle Analysis | Skip opposite candle signals: If closed candle bar color will match the signal direction, but candle structure will be opposite (for example: bearish green hammer, long high stick on top of a small green square) > no trade will be open. >>>>> Candle Analysis | Skip doji candle signals: If closed candle bar will be the uncertain doji > no trade will be open. >>>>> Divergence/Oscillator Analysis | EWO (Elliot Wave Oscillator) signal confirmation: LONG will only be open if at signal, EWO is green or will be at bullish slope (you can select which setting you desire), SHORT if EWO is red or will be at bearish slope. >>>>> Divergence/Oscillator Analysis | VWAP signal confirmation: LONG will only be open if at signal, the price will be above VWAP, SHORT if below. >>>>> Divergence/Oscillator Analysis | Moving Average signal confirmation: LONG will only be open if at signal, the price will be above selected Moving Average, SHORT if below. >>>>> Divergence/Oscillator Analysis | ATR signal confirmation: LONG will only be open if at signal, the price will be above ATR, SHORT if below. >>>>> Divergence/Oscillator Analysis | RSI + MACD signal confirmation: LONG will only be open if at signal, RSI + MACD will be bullish, SHORT if RSI + MACD will be bearish. >>>>> Volume signal confirmation: LONG/SHORT will only be opened with strong Volume matching the signal direction, by default, strong Volume percentage is set to 150% and weak to 50%, but you can change it as you desire. =========================================================================== ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| TP System - VERY IMPORTANT INFO! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" - amount by which current trade/position needs to be reduced/partially closed/sold. ------------------------------------------------------------------------------------------------------------------- TP System: Dynamic "TP PERCENTAGE" - will always be the same amount (trade/position size divided by the # of take-profit(TP) targets) and percentage to be closed will always be of the ORIGINAL trade/position. ------------------------------------------------------------------------------------------------------------------- TP System: Static "TP PERCENTAGE" - will always be the same amount IF take-profit(TP) targets are hit 1-by-1 (TP1 > TP2 > TP3 > TP4 > TP5), otherwise it will vary and unless it is a 1st take-profit(TP1), the REMAINING trade/position size will always be smaller than original and therefore the percentage to be closed will always be of the REMAINING trade/position and NOT the original one! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" CheatSheet (these are the only percentages you may see) ----------------------------------------------------------------------- TP PERCENTAGE---Close/Sell Amount-------------Example (trade size: 50 stocks) 20%-------------trade size * 0.2--------------50 * 0.2 = 10 stocks 25%-------------trade size * 0.25-------------50 * 0.25 = 12.5(~13) stocks 34%-------------trade size * 0.34-------------50 * 0.34 = 17 stocks 40%-------------trade size * 0.4--------------50 * 0.4 = 20 stocks 50%-------------trade size * 0.5--------------50 * 0.5 = 25 stocks 60%-------------trade size * 0.6--------------50 * 0.6 = 30 stocks 66%-------------trade size * 0.66-------------50 * 0.66 = 33 stocks 75%-------------trade size * 0.75-------------50 * 0.75 = 37.5(~38) stocks 80%-------------trade size * 0.8--------------50 * 0.8 = 40 stocks 100%------------trade size--------------------50 = 50 stocks ----------------------------------------------------------------------- If for any reason a portion of the current/remaining trade closed at such occurrence was slightly wrong, it is not an issue. Such occurrences are rare and with slight difference in partial TP closed is not significant to overall performance of our algorithms. ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| Alert Settings (you don’t have to touch this section unless you will be using TradingView alerts through a Webhook to use with trading bot) --------------------------------------------------------------------------- Here is how a LONG OPEN alert looks like. NOTE: Each label , , etc. is customizable, you can change the text of it within indicator Input settings. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: OPEN ENTRY: 20000 TP1: 20500 TP2: 21000 TP3: 21500 TP4: 22500 TP5: 23500 SL: 19000 Leverage: 0 --------------------------------------------------------------------------- Here is how a TP1 alert will look with 5 TPs breakdown of the trade. NOTE1: Next to TP1 taken it will show at which price it was triggered. NOTE2: Next to "TP Percentage" it shows how much of the CURRENT/ACTIVE/REMAINING trade needs to be closed. NOTE2: If TP2/3/4/5 comes before TP1 - the alert will tell you exactly how many percent of the trade needs to be closed! ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: TP1 TP1: 20500 TP Percentage: 20% --------------------------------------------------------------------------- Here is how an alert will look for LONG - STOP-LOSS. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M ENTRY: 20000 LONG: SL SL: 19000 --------------------------------------------------------------------------- Here is how an alert will look for LONG - EOD (End of Day) In Profit close. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: EOD-Close (profit) ENTRY: 20000 EOD-Close: 21900 =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- -Add indicator to chart and make sure it is configured (check back-testing results) -Right-click anywhere on the TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Alert name: Whatever you want -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, past performance is not necessarily indicative of future results, so please trade responsibly!) --------------------------------------------------------------------------- NOTE: There seems to be a strange glitch when strategy is running live, it will show "double-take" take-profits labels on the chart. This is not affecting the script logic and backtesting results, if you will remove/re-add the script afterwards, it will no longer show the duplicate orders... this must be some sort of a glitch as every alert was thoroughly tested to make sure everything is working!
Strategia Pine Script™
di tso_trade
7
[Volume Profile] Signal Clean Up Analysis with Backtest (TSO) This is a full-cycle trading system indicator, which uses Volume Profile for generating signals using a custom developed algorithm, TP (Take Profit) and SL (Stop Loss) levels. There are 2 SOURCES for signals (each can be used separately or both can be used at the same time, each signal SOURCE is using Volume Profile levels to open optimal trade direction) with chained (NOTE: You can select several or ALL of the features, this is not limited to either one) signal cleanup and analysis approach with scheduling and alerting capabilities. Works with most popular timeframes: 1M, 5M, 15M, 1H, 4H, D, great for intraday trading! NOTE: Every calculation is done on a confirmed closed candle bar state, so the indicator will never repaint! =========================================================================== Explanation of all the Features | Configuration Guide | Indicator Settings | Signal Cleanup Analysis --------------------------------------------------------------------------- >>> Customizable Backtesting for a specific date range, results via TradingView strategy, which includes “Deep Backtesting” for largest amounts of data on trading results. >>> Trading Schedule with customizable trading daily time range, automatic closing/alert trades before Power Hour or right before market closes or leave it open until next day. >>> 3 Trading Systems. >>> Multiple Signal SOURCEs for opening trades, either SOURCE can be used or both at the same time! >>> Static/Dynamic Stop-Loss setups (HIGHLIGHT: Stop-Loss will be moved to Entry after TP1 is taken, which minimizes risk). >>> Single or Multiple profit targets (up to 3). >>> Take-Profit customizable offset feature (set your Take-Profit targets slightly before everyone is expecting it!). >>> Candle bar signal analysis (matching candle color, skip opposite structured and/or doji candle uncertain signals). >>> Additional analysis of VWAP/EMA/ATR/EWO (Elliot Wave Oscillator)/Divergence MACD+RSI/Volume signal confirmation (clean up your chart with indicator showing only the best potential signals!). >>> Advanced Alerts setup, which can be potentially setup with a trading bot over TradingView Webhook (NOTE: This will require advanced programming knowledge). =========================================================================== Labels, plots, colors explanations: --------------------------------------------------------------------------- >>>>> Signal SOURCE(s): Green/Red arrows, which will be shown unconditionally, outside of trade engine and can be hidden if desired. >>>>> LONG open: green "house" looking arrow below candle bar. >>>>> SHORT open: red "house" looking arrow above candle bar. >>>>> LONG/SHORT take-profit target: green/red circles (multi-profit > TP2/3/4/5 smaller circles). >>>>> LONG/SHORT take-profit hits: green/red diamonds. >>>>> LONG/SHORT stop-loss target: green/red + crosses. >>>>> LONG/SHORT stop-loss hits: green/red X-crosses. >>>>> LONG/SHORT EOD close (profitable trade): green/red squares. >>>>> LONG/SHORT EOD close (loss trade): green/red PLUS(+)-crosses. =========================================================================== Date Range and Trading Schedule Settings --------------------------------------------------------------------------- >>>>> Date Range: Select your start and/or end dates (uncheck “End” for indicator to show results up to the very moment and to use for LIVE trading) for backtesting results, if not using backtesting – uncheck “Start”/“End” to turn it off. >>>>> Use TradingView “Strategy Tester” to see backtesting results NOTE: If Strategy Tester does not show any results with Date Ranged fully unchecked, there may be an issue where a script opens a trade, but there is not enough TradingView power to set the Take-Profit and Stop-Loss and somehow an open trade gets stuck and never closes, so there are “no trades present”. In such case you will need to manually check “Start”/“End” dates or use “Depp Backtesting” feature! >>>>> Trading Schedule: This is where you can setup Intraday Session or any custom session schedule you wish. Turn it ON. Select trading hours. Select EOD (End of Day) setting (NOTE: If it will be OFF, the indicator will assume you are holding your position open until next day!). >>> Trading Systems: 1) "Open Until Closed by TP or SL": the signal will only open a trade if no trades are currently open/trunning, a trade can only be closed by Take Profit, Stop Loss or End of Day close (if turned on) | 2) "Open Until Closed by TP or SL + OCA": Same as 1), but if there is an opposite signal to the trade which is currently open > it will immediately be closed with new trade open or End of Day close (if turned on) | 3) "OCA (no TP or SL)": There are is Take Profit or Stop Loss, only an opposite signal will close current trade and open an opposite one or End of Day close (if turned on) >>>>> MULTIPROFIT | TP (Take-Profit) System: Once the trade is open, all Take-Profit target(s) are immediately calculated and set for the trade > once the target(s) is hit > trade will be partially closed (if candle bar closes beyond several Take-Profit targets > trade will be reduced accordingly to the amount of how many Take-Profit targets were hit) >>>>> MULTIPROFIT | SL (Stop-Loss) System: 1) Static – Once the trade is open, Stop-Loss is calculated and set for the remaining of the trade ||| 2) Dynamic – At trade open, Stop-Loss is calculated and set the same way, however once 1st Take-Profit is taken > Stop-Loss is moved to Entry, reducing the risk. >>>>> # of TPs (number of take profit targets): Just like it is named, this is where you select the number of Take-Profit targets for your trading system (NOTE: If "OCA (no TP or SL)" Trading System is selected, this setting won’t do anything, since there are no TP or SLs for that system). >>>>> TP(s) offset: This is a special feature for all Take-Profit targets, where you can turn on a customizable offset, so that if the price is almost hitting the Take-Profit target, but never actually touches it > you will capture it. This is good to use with HHLL (Highest High Lowest Low), which is pretty much a Support/Resistance as often the price will nearly touch these strong areas and turn around… =========================================================================== Take-Profit and Stop-Loss visual example: --------------------------------------------------------------------------- 1) A simply nice intraday trading day for SPY (S&P500 ETF TRUST) with a single Take-Profit target on each trade. See how Take-Profit distances increase with price momentum and how Stop-Loss is following the trade reducing the risk! 2) Same intraday trading day for SPY (S&P500 ETF TRUST) with 3 Take-Profit targets with static Stop-Loss. 3) Same intraday trading day for SPY (S&P500 ETF TRUST) with 3 Take-Profit targets with dynamic Stop-Loss. You can see how Stop-Loss was moved once TP1 is taken! =========================================================================== Trade Analysis and Cleanup Settings --------------------------------------------------------------------------- >>>>> Candle Analysis | Candle Color signal confirmation: If closed candle bar color does not match the signal direction > no trade will be open. >>>>> Candle Analysis | Skip opposite candle signals: If closed candle bar color will match the signal direction, but candle structure will be opposite (for example: bearish green hammer, long high stick on top of a small green square) > no trade will be open. >>>>> Candle Analysis | Skip doji candle signals: If closed candle bar will be the uncertain doji > no trade will be open. >>>>> Divergence/Oscillator Analysis | EWO (Elliot Wave Oscillator) signal confirmation: LONG will only be open if at signal, EWO is green or will be at bullish slope (you can select which setting you desire), SHORT if EWO is red or will be at bearish slope. >>>>> Divergence/Oscillator Analysis | VWAP signal confirmation: LONG will only be open if at signal, the price will be above VWAP, SHORT if below. >>>>> Divergence/Oscillator Analysis | Moving Average signal confirmation: LONG will only be open if at signal, the price will be above selected Moving Average, SHORT if below. >>>>> Divergence/Oscillator Analysis | ATR signal confirmation: LONG will only be open if at signal, the price will be above ATR, SHORT if below. >>>>> Divergence/Oscillator Analysis | RSI + MACD signal confirmation: LONG will only be open if at signal, RSI + MACD will be bullish, SHORT if RSI + MACD will be bearish. >>>>> Volume signal confirmation: LONG/SHORT will only be open if closing candle volume is 150% above average Volume based on the Volume Length. =========================================================================== Alert Settings (you don’t have to touch this section unless you will be using TradingView alerts through a Webhook to use with trading bot) --------------------------------------------------------------------------- Here is how a LONG OPEN alert looks like (each label is customizable + I can add up more items/labels if needed): COIN: BTCUSD TIMEFRAME: 15M LONG: OPEN ENTRY: 20000 TP1: 20500 TP2: 21000 TP3: 21500 SL: 19000 Leverage: 0 =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- -Right-click anywhere on the TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Alert name: Whatever you want -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, past performance is not necessarily indicative of future results, so please trade responsibly!)
Strategia Pine Script™
di tso_trade
3
[SMA Cross + HHLL] Signal Clean Up Analysis with Backtest (TSO) This is a DEMO indicator with a simple 2 SMAs cross for signals + HHLL for TP/SL. It mainly demonstrates chained (NOTE: You can select several or ALL of the features, this is not limited to either one) signal cleanup and analysis approach with scheduling and alerting capabilities. Works with most popular timeframes: 1M, 5M, 15M, 1H, 4H, D. =========================================================================== Here are some pre-set examples with nice Backtesting results (try em out!): --------------------------------------------------------------------------- >>> Indexes – SPY (INTRADAY SETUP ): Timeframe: 5M | Trading Schedule: ON, 10:00-15:45 ET, EOD: At Market Close | Trading System: Open Until Closed by TP or SL | MULTIPROFIT: TP (take profit) System: Dynamic | MULTIPROFIT: SL (stop loss) System (This is only for “Dynamic” TP System ONLY!!!): Dynamic | # of TPs: 5 | Skip opposite candle types in signals, which are opposite to direction of candle color (for example: bearish green hammer) | Everything else: Default >>> Bitcoin – BTCUSD (24/7 SETUP): Timeframe: 1H | Trading Schedule: OFF, End of Day (EOD): OFF | Trading System: Open Until Closed by TP or SL | MULTIPROFIT: TP (take profit) System: Dynamic | MULTIPROFIT: SL (stop loss) System (This is only for “Dynamic” TP System ONLY!!!): Dynamic | # of TPs: 3 | TP(s) Offset: on, TP(s) offset amount: 50 | ATR confirmation | Everything else: Default =========================================================================== Explanation of all the Features | Configuration Guide | Indicator Settings --------------------------------------------------------------------------- --------------------------------------------------------------------------- Signal cleanup analysis: --------------------------------------------------------------------------- >>> Customizable Backtesting for a specific date range, results via TradingView strategy, which includes “Deep Backtesting” for largest amounts of data on trading results. >>> Trading Schedule with customizable trading daily time range, automatic closing/alert trades before Power Hour or right before market closes or leave it open until next day. >>> 3 Trading Systems. >>> Static/Dynamic Take-Profit setups (HILIGHT: momentum catch dynamic Take-Profit approach). >>> Static/Dynamic Stop-Loss setups (HIGHLIGHT: smart trailing Stop-Loss which minimizes risk). >>> Single or Multiple profit targets (up to 5). >>> Take-Profit customizable offset feature (set your Take-Profit targets slightly before everyone is expecting it!). >>> Candle bar signal analysis (skip opposite structured and/or doji candle uncertain signals). >>> Additional analysis of VWAP/EMA/ATR/EWO (Elliot Wave Oscillator)/Divergence MACD+RSI signal confirmation (clean up your chart with indicator showing only the best potential signals!). >>> Advanced Alerts setup, which can be potentially setup with a trading bot over TradingView Webhook (NOTE: This will require advanced programming knowledge). >>> Customize your signal SOURCE and your Take-Profit/Stop-Loss SOURCES as you desire. =========================================================================== Labels, plots, colors explanations: --------------------------------------------------------------------------- >>>>> Signal SOURCE: SMA crossings (green and red BIG circles) . >>>>> Take-profit/Stop-loss SOURCE: HHLL (Highest High Lowest Low) . >>>>> LONG open: green arrow below candle bar. >>>>> SHORT open: red arrow above candle bar. >>>>> LONG/SHORT take-profit target: green/red circles (multi-profit > TP2/3/4/5 smaller circles). >>>>> LONG/SHORT take-profit hits: green/red diamonds. >>>>> LONG/SHORT stop-loss target: green/red + crosses. >>>>> LONG/SHORT stop-loss hits: green/red X-crosses. >>>>> LONG/SHORT EOD close (profitable trade): green/red squares. >>>>> LONG/SHORT EOD close (loss trade): green/red PLUS(+)-crosses. =========================================================================== Date Range and Trading Schedule Settings --------------------------------------------------------------------------- >>>>> Date Range: Select your start and/or end dates (uncheck “End” for indicator to show results up to the very moment and to use for LIVE trading) for backtesting results, if not using backtesting – uncheck “Start”/“End” to turn it off. --------------------------------------------------------------------------- >>>>> Use TradingView “Strategy Tester” to see backtesting results --------------------------------------------------------------------------- NOTE: If Strategy Tester does not show any results with Date Ranged fully unchecked, there may be an issue where a script opens a trade, but there is not enough TradingView power to set the Take-Profit and Stop-Loss and somehow an open trade gets stuck and never closes, so there are “no trades present”. In such case you will need to manually check “Start”/“End” dates or use “Depp Backtesting” feature! --------------------------------------------------------------------------- >>>>> Trading Schedule: This is where you can setup Intraday Session or any custom session schedule you wish. Turn it ON. Select trading hours. Select EOD (End of Day) setting (NOTE: If it will be OFF, the indicator will assume you are holding your position open until next day!). >>>>> Trading System: 1) Open Until Closed by TP or SL – once the trade is open, it can only be closed by Take-Profit, Stop-Loss or at EOD (if turned on) ||| 2) OCA – Opposite Trade will Open Closing Current Trade – Same as 1), except that when and if an OPPOSITE signal is received > indicator will close current trade immediately (profit or loss) and open a new one(NOTE: This will only happen with an OPPOSITE direction trade!) ||| 3) Open Until Opposite Signal or EOD (if turned on) – This approach is the simplest one, there are no Take-Profits or Stop-Losses, the trade is open until an OPPOSITE signal is received or until EOD (if turned on). Take-Profit, Stop-Loss and Multi-Profit Settings >>>>> MULTIPROFIT | TP (Take-Profit) System: 1) Static – Once the trade is open, all Take-Profit target(s) are immediately calculated and set for the trade > once the target(s) is hit > trade will be partially closed (if candle bar closes beyond several Take-Profit targets > trade will be reduced accordingly to the amount of how many Take-Profit targets were hit) ||| 2) Dynamic – Once the trade is open, only the 1st Take-Profit target is calculated, once the 1st Take-Profit is hit > next Take-Profit distance is calculated based on the distance from trade Entry to where 1st Take-Profit was taken, once 2nd Take-Profit is taken > 3rd Take-Profit is calculated per same logic, these are good for price momentum as with price speeding up – profits increase as well! NOTE: Below 2 settings, each correspond to only 1 setting of the TP (Take-Profit) System, please pay attention to the above TP system setting before changing SL settings! >>>>> MULTIPROFIT | SL (Stop-Loss) System : 1) Static – Once the trade is open, Stop-Loss is calculated and set for the remaining of the trade ||| 2) Dynamic – At trade open, Stop-Loss is calculated and set the same way, however once 1st Take-Profit is taken > Stop-Loss is moved to Entry, reducing the risk. >>>>> MULTIPROFIT | SL (Stop-Loss) System : 1) Static - Once the trade is open, Stop-Loss is calculated and set for the remaining of the trade ||| 2) Dynamic – At trade open, Stop-Loss is calculated and set the same way, however with each Take-Profit taken, Stop-Loss will be moved to previous Take-Profit (TP1 taken > SL:Entry | TP2 taken > SL:TP1 | TP3 taken > SL:TP2 | TP4 taken > SL:TP3 | TP5 taken > trade closed), this is basically a smart Stop-Loss trailing system! >>>>> # of TPs (number of take profit targets): Just like it is named, this is where you select the number of Take-Profit targets for your trading system (NOTE: If “3) Open Until Opposite Signal or EOD (if turned on)” Trading System is selected, this setting won’t do anything, since there are no TP or SLs for that system). >>>>> TP(s) offset: This is a special feature for all Take-Profit targets, where you can turn on a customizable offset, so that if the price is almost hitting the Take-Profit target, but never actually touches it > you will capture it. This is good to use with HHLL (Highest High Lowest Low), which is pretty much a Support/Resistance as often the price will nearly touch these strong areas and turn around… --------------------------------------------------------------------------- Dynamic/Static Take-Profit and Stop-Loss visual examples: 1) Fully Dynamic Take-Profit and Stop-Loss setup for BTCUSD See how Take-Profit distances increase with price momentum and how Stop-Loss is following the trade reducing the risk! 2) Static/Dynamic, Static Take-Profit and Dynamic Stop-Loss setup for SPY (S&P500 ETF TRUST) You can see a static Take-Profit set at position open, while Stop-Loss is semi-dynamic adjusting to Entry once TP1 target is taken! 3) Fully Static Take-Profit and Stop-Loss setup for SPY (S&P500 ETF TRUST) This one is a fully static setup for both Take-Profit and Stop-Loss, you can also observe how trade is closed right before the Power Hour (trade can be closed right before Power Hour or right before Market Closes or left overnight as you desire). --------------------------------------------------------------------------- Trade Analysis and Cleanup Settings >>>>> Candle Analysis | Candle Color signal confirmation: If closed candle bar color does not match the signal direction > no trade will be open. >>>>> Candle Analysis | Skip opposite candle signals: If closed candle bar color will match the signal direction, but candle structure will be opposite (for example: bearish green hammer, long high stick on top of a small green square) > no trade will be open. >>>>> Candle Analysis | Skip doji candle signals: If closed candle bar will be the uncertain doji > no trade will be open. >>>>> Divergence/Oscillator Analysis | EWO (Elliot Wave Oscillator) signal confirmation: LONG will only be open if at signal, EWO is green or will be at bullish slope (you can select which setting you desire), SHORT if EWO is red or will be at bearish slope. >>>>> Divergence/Oscillator Analysis | VWAP signal confirmation: LONG will only be open if at signal, the price will be above VWAP, SHORT if below. >>>>> Divergence/Oscillator Analysis | Moving Average signal confirmation: LONG will only be open if at signal, the price will be above selected Moving Average, SHORT if below. >>>>> Divergence/Oscillator Analysis | ATR signal confirmation: LONG will only be open if at signal, the price will be above ATR, SHORT if below. >>>>> Divergence/Oscillator Analysis | RSI + MACD signal confirmation: LONG will only be open if at signal, RSI + MACD will be bullish, SHORT if RSI + MACD will be bearish. =========================================================================== Alert Settings (you don’t have to touch this section unless you will be using TradingView alerts through a Webhook to use with trading bot) --------------------------------------------------------------------------- Here is how a LONG OPEN alert looks like (each label is customizable + I can add up more items/labels if needed): COIN: BTCUSD TIMEFRAME: 15M LONG: OPEN ENTRY: 20000 TP1: 20500 TP2: 21000 TP3: 21500 SL: 19000 Leverage: 0 =========================================================================== Trade Open Signal SOURCE + Take-Profit/Stop-Loss SOURCE --------------------------------------------------------------------------- >>> Customize your signal SOURCE, Take-Profit and Stop-Loss SOURCE as desired (NOTE: These are pre-configured and should be usable on majority of markets, however feel free to play around with these settings as there is nearly an infinite amount of setups out there! =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- -Right-click anywhere on the TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Alert name: Whatever you want -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, so please trade responsibly!)
Strategia Pine Script™
di tso_trade
Range Analysis - By LeviathanThe Interactive Range Analysis script is an essential tool for analyzing price ranges. It automatically draws important range levels, generates a Volume Profile or Open Interest profile and horizontal/vertical heatmaps, plots the anchored VWAP, draws Fibonacci levels, and much more. How to use the indicator: 1. The script will prompt you to select the "Start Time" and "End Time" using Tradingview's interactive interface. These two points will determine the length of the range. 2. Once you have selected the range, the script will automatically anchor the range highs and lows to the highest and lowest close/wick/hlc3/ohlc4 (whichever you prefer). 3. You can then begin exploring different tools and options such as Quarters, Eighths, Fibonacci, Outer Levels, VWAP, Horizontal Volume/OI Heatmap, Vertical Volume/OI Heatmap, Fixed Range Volume Profile, Open Interest Profile, Value Area, VAH, VAL, and POC. 4. You can adjust the range by dragging the Start Time and End Time anchors or by removing/reapplying the script. Tool overview Range Levels After selecting your preferred time range, the script will identify and draw a range high level and a range low level, which serve as a base for other important levels. “Half” is the level halfway between the range high and range low. “Quarters” will, as the name suggests, split the range into four equal zones (quarters) and “Eighths” will split the range into eight equal zones (eighths). ”Fibonacci” option allows you to display Fibonacci retracement levels (0.786, 0.618, 0.382, 0.236). “VWAP” will plot a Volume Weighted Average Price, anchored to the start of the range. “Direction” input lets you choose whether your range is UP or DOWN trending in order to make sure that the Fibonacci levels and labels are generated and assigned correctly. With “Outer” turned ON, the script will also generate active levels (quarters/eighths/Fibonacci) above and below the selected price range. “Extend Right” will extend all levels to the right indefinitely, while “Extend (+Bars)” lets you choose how far right the levels get extended. “Diagonal Line” is drawn from the bottom left of the range to the top right of the range or from the top left of the range to the bottom right of the range, depending on the “Direction” input. Volume Profile / Open Interest Profile After selecting the “Data Type”, Volume Profile or OI Profile can be generated by turning ON the “Volume/OI Profile” option. “Resolution” input defines the amount of nodes/rows in the range that are used in profile/heatmap generation for distributing the data. While you can increase the “Resolution” to get better, more granular profiles, you should keep in mind that you might need to lower the resolution when generating profiles for larger ranges. ”Node Type” offers you two options when it comes to the representation of data: Up/Down - divides a node in two sections for up volume/OI and down volume/OI, Total - one node for total volume/OI and Delta - net difference in up volume/OI and down volume/OI. ”Profile Position” lets you choose whether the profile is positioned on the left side of the range or on the right side of the range. “Profile Direction” determines whether the profile nodes are facing right or left. “Profile Type” enables you to visualize the nodes in a classic way (Type 1) or in a way where down volume/negative OI are positioned on the left side of the y axis and up volume/positive OI on the right side of the y axis. “Node Size (%)” defines how much space in the range can be taken by the profile’s nodes. Eg. 50% will allow the largest node to extend to the middle of the range (and others scaled accordingly), 100% will allow the largest node to extend the max right point of the range (and others scaled accordingly). ”Value Area (%)” defines the VA zone, which represents the area where the most volume occured (usually 70% or 68%). ”Horizontal Heatmap” will display a heatmap-like overlay, that will help you identify the price levels where most volume/open interest action occurred. ”Vertical Heatmap” will display a heatmap-like overlay, that will help you identify the points in time where most volume/open interest action occurred. A more detailed description of this indicator is coming in the next few days. Important: * If volume or OI profile does not get generated, try lowering the resolution. * Once in a while, the script will disappear from your chart. Just remove and reapply. * Open Interest data is only avaiable on Binance Perpetual Futures pairs To learn more, read the tooltips in the indicator’s settings and stay tuned for upcoming additions (Range Market Structure, Liquidation Levels, Range Statistics,…)
Indicatore Pine Script™
di LeviathanCapital
43
Big Poppa Code Strat & Momentum Strategy IndicatorThis indicator is a combination of a few things in order to work with a unique trading style gleaned from Callme100k, jrgreatness, TrustMyLevels , FaithInTheStrat, Rob Smith and Saty Mahajan. This Indicator is created to help you day trade using, ATR Fibonacci Levels, Price Action and Momentum. It displays Fibonacci Levels Based on ATR to indicate when a security is 0.236, 0.382 +- the Days Open, +- the Days Open, 0.618 +- the Days Open and 1.0 +- Days Open. To understand this script you need to understand Average True Range (ATR) 1 Bar Inside Bar 2 Bar Outside Bar (Break either the top or bottom) 3 Bar Engulfing Bar Strat Setups - 212, 322, 312 Fibonacci - 0.236, 0.382, 0.618, 1.0 Moving Averages A Trend is considered bullish when (green) Current Price is greater than the Fast EMA Value (8) Fast EMA is greater than PIVOT EMA Value (21) Pivot EMA is greater than SLOW EMA Value (34) OR Hull is trending up and the Price is above the Volume Weighted Moving Average and price is above VWAP A trend is considered Bearish when (red) Current Price is less than the Fast EMA Value (8) Fast EMA is less than PIVOT EMA Value (21) Pivot EMA is less than SLOW EMA Value (34) OR Hull is trending down and the Price is below the Volume Weighted Moving Average and price is below VWAP If these conditions are not met then the Momentum is in Conflict (orange) The Momentum band will match the color of the current trend The table that is present can be turned off at any time lets you see 1) If Moving Averages are showing bullish, bearish or in conflict 2) If There us Time Frame Continuity, (if 5 min up, are all the other timeframes up also) 3) How much of the ATR have we moved on the day 4) Are we in Call or Put range for the day based on ATR Fib Levels The Ideal situation for entering a call 1) Momentum is Green 2) FTFC on Green 3) A Strat Actionable Signal is present 4) You are in the call range, 0.236 - 0.618 ATR + the Price 5) The ATR still has room, I.e only 50% of the ATR has been run already Ideal situation from entering a put 1) Momentum is red 2) FTFC on Red 3) A Strat Actionable Signal is present 4) You are in the put range, 0.236 - 0.618 ATR - the Price 5) The ATR still has room, I.e only 50% of the ATR has been run already Exit the trade for these reasons you entered (for profit or loss) 1) ATR has no more room 2) FTFC is now in conflict 3) Momentum has shifted Take Profit when 1) You reach a new ATR Level 0.618, 1.0 , -0.618, -1, etc Passive Stop Loss 1) Open Price if you are aggressive 2) Next ATR Level Down or Up Feel free to take profit and leave runners This script does not give signals, you should do your own research, I am not a financial advisors, I am simply applying principles of seasoned veterans to code. You make all decisions about how you buy, sell and trade. The creator of this script makes no promises and takes no responsibility for your personal trading. To research the methods described above look up Rob Smith : The Strat Saty Mahajan : ATR Levels Fibonacci Using the HULL Moving Average Exponential Moving Averages VWAP VWMA
Indicatore Pine Script™
di bigpoppacode97964
8
TurntLibraryLibrary "TurntLibrary" Collection of functions created for simplification/easy referencing. Includes variations of moving averages, length value oscillators, and a few other simple functions based upon HH/LL values. ma(source, length, type)   Apply a moving average to a float value   Parameters:      source : Value to be used      length : Number of bars to include in calculation      type : Moving average type to use ("SMA","EMA","RMA","WMA","VWAP","SWMA","LRC")   Returns: Smoothed value of initial float value curve(src, len, lb1, lb2)   Exaggerates curves of a float value designed for use as an exit signal.   Parameters:      src : Initial value to curve      len : Number of bars to include in calculation      lb1 : (Default = 1) First lookback length      lb2 : (Default = 2) Second lookback length   Returns: Curved Average fragma(src, len, space, str)   Average of a moving average and the previous value of the moving average   Parameters:      src : Initial float value to use      len : Number of bars to include in calculation      space : Lookback integer for second half of average      str : Moving average type to use ("SMA","EMA","RMA","WMA","VWAP","SWMA","LRC")   Returns: Fragmented Average maxmin(x, y)   Difference of 2 float values, subtracting the lowest from the highest   Parameters:      x : Value 1      y : Value 2   Returns: The +Difference between 2 float values oscLen(val, type)   Variable Length using a oscillator value and a corresponding slope shape ("Incline",Decline","Peak","Trough")   Parameters:      val : Oscillator Value to use      type : Slope of length curve ("Incline",Decline","Peak","Trough")   Returns: Variable Length Integer hlAverage(val, smooth, max, min, type, include)   Average of HH,LL with variable lengths based on the slope shape ("Incline","Decline","Trough") value relative to highest and lowest   Parameters:      val : Source Value to use      smooth      max      min      type      include : Add "val" to the averaging process, instead of more weight to highest or lowest value   Returns: Variable Length Average of Highest Lowest "val" pct(val)   Convert a positive float / price to a percentage of it's highest value on record   Parameters:      val : Value To convert to a percentage of it's highest value ever   Returns: Percentage hlrange(x, len)   Difference between Highest High and Lowest Low of float value   Parameters:      x : Value to use in calculation      len : Number of bars to include in calculation   Returns: Difference midpoint(x, len, smooth)   The average value of the float's Highest High and Lowest Low in a number of bars   Parameters:      x : Value to use in calculation      len      smooth : (Default=na) Optional smoothing type to use ("SMA","EMA","RMA","WMA","VWAP","SWMA","LRC")   Returns: Midpoint
Libreria Pine Script™
di EsIstTurnt
Physics CandlesPhysics Candles embed volume and motion physics directly onto price candles or market internals according to the cyclic pattern of financial securities. The indicator works on both real-time “ticks” and historical data using statistical modeling to highlight when these values, like volume or momentum, is unusual or relatively high for some periodic window in time. Each candle is made out of one or more sub-candles that each contain their own information of motion, which converts to the color and transparency, or brightness, of that particular candle segment. The segments extend throughout the entire candle, both body and wicks, and Thick Wicks can be implemented to see the color coding better. This candle segmentation allows you to see if all the volume or energy is evenly distributed throughout the candle or highly contained in one small portion of it, and how intense these values are compared to similar time periods without going to lower time frames. Candle segmentation can also change a trader’s perspective on how valuable the information is. A “low” volume candle, for instance, could signify high value short-term stopping volume if the volume is all concentrated in one segment. The Candles are flexible. The physics information embedded on the candles need not be from the same price security or market internal as the chart when using the Physics Source option, and multiple Candles can be overlayed together. You could embed stock price Candles with market volume, market price Candles with stock momentum, market structure with internal acceleration, stock price with stock force, etc. My particular use case is scalping the SPX futures market (ES), whose price action is also dictated by the volume action in the associated cash market, or SPY, as well as a host of other securities. Physics allows you to embed the ES volume on the SPY price action, or the SPY volume on the ES price action, or you can combine them both by overlaying two Candle streams and increasing the Number of Overlays option to two. That option decreases the transparency levels of your coloring scheme so that overlaying multiple Candles converges toward the same visual color intensity as if you had one. The Candle and Physics Sources allows for both Symbols and Spreads to visualize Candle physics from a single ticker or some mathematical transformation of tickers. Due to certain TradingView programming restrictions, each Candle can only be made out of a maximum of 8 candle segments, or an “8-bit” resolution. Since limits are just an opportunity to go beyond, the user has the option to stack multiple Candle indicators together to further increase the candle resolution. If you don’t want to see the Candles for some particular period of the day, you can hide them, or use the hiding feature to have multiple Candles calibrated to show multiple parts of the trading day. Securities tend to have low volume after hours with sharp spikes at the open or close. Multiple Candles can be used for multiple parts of the trading day to accommodate these different cycles in volume. The Candles do not need be associated with the nominal security listed on the TV chart. The Candle Source allows the user to look at AAPL Candles, for instance, while on a TSLA or SPY chart, each with their respective volume actions integrated into the candles, for instance, to allow the user to see multiple security price and volume correlation on a single chart. The physics information currently embeddable on Candles are volume or time, velocity, momentum, acceleration, force, and kinetic energy. In order to apply equations of motion containing a mass variable to financial securities, some analogous value for mass must be assumed. Traders often regard volume or time as inextricable variables to a securities price that can indicate the direction and strength of a move. Since mass is the inextricable variable to calculating the momentum, force, or kinetic energy of motion, the user has the option to assume either time or volume is analogous to mass. Volume may be a better option for mass as it is not strictly dependent on the speed of a security, whereas time is. Data transformations and outlier statistics are used to color code the intensity of the physics for each candle segment relative to past periodic behavior. A million shares during pre-market or a million shares during noontime may be more intense signals than a typical million shares traded at the open, and should have more intense color signals. To account for a specific cyclic behavior in the market, the user can specify the Window and Cycle Time Frames. The Window Time Frame splits up a Cycle into windows, samples and aggregates the statistics for each window, then compares the current physics values against past values in the same window. Intraday traders may benefit from using a Daily Cycle with a 30-minute Window Time Frame and 1-minute Sample Time Frame. These settings sample and compare the physics of 1-minute candles within the current 30-minute window to the same 30-minute window statistics for all past trading days, up until the data limit imposed by TradingView, or until the Data Collection Start Date specified in the settings. Longer-term traders may benefit from using a Monthly Cycle with a Weekly Time Frame, or a Yearly Cycle with a Quarterly Time Frame. Multiple statistics and data transformation methods are available to convey relative intensity in different ways for different trading signals. Physics Candles allows for both Normal and Log-Normal assumptions in the physics distribution. The data can then be transformed by Linear, Logarithmic, Z-Score, or Power-Law scoring, where scoring simply assigns an intensity to the relative physics value of each candle segment based on some mathematical transformation. Z-scoring often renders adequate detection by scoring the segment value, such as volume or momentum, according to the mean and standard deviation of the data set in each window of the cycle. Logarithmic or power-law transformation with a gamma below 1 decreases the disparity between intensities so more less-important signals will show up, whereas the power-law transformation with gamma values above 1 increases the disparity between intensities, so less more-important signals will show up. These scores are then converted to color and transparency between the Min Score and the Max Score Cutoffs. The Auto-Normalization feature can automatically pick these cutoffs specific to each window based on the mean and standard deviation of the data set, or the user can manually set them. Physics was developed with novices in mind so that most users could calibrate their own settings by plotting the candle segment distributions directly on the chart and fiddling with the settings to see how different cutoffs capture different portions of the distribution and affect the relative color intensities differently. Security distributions are often skewed with fat-tails, known as kurtosis, where high-volume segments for example, have a higher-probabilities than expected for a normal distribution. These distribution are really log-normal, so that taking the logarithm leads to a standard bell-shaped distribution. Taking the Z-score of the Log-Normal distribution could make the most statistical sense, but color sensitivity is a discretionary preference. Background Philosophy This indicator was developed to study and trade the physics of motion in financial securities from a visually intuitive perspective. Newton’s laws of motion are loosely applied to financial motion: “A body remains at rest, or in motion at a constant speed in a straight line, unless acted upon by a force”. Financial securities remain at rest, or in motion at constant speed up or down, unless acted upon by the force of traders exchanging securities. “When a body is acted upon by a force, the time rate of change of its momentum equals the force”. Momentum is the product of mass and velocity, and force is the product of mass and acceleration. Traders render force on the security through the mass of their trading activity and the acceleration of price movement. “If two bodies exert forces on each other, these forces have the same magnitude but opposite directions.” Force arises from the interaction of traders, buyers and sellers. One body of motion, traders’ capitalization, exerts an equal and opposite force on another body of motion, the financial security. A securities movement arises at the expense of a buyer or seller’s capitalization. Volume The premise of this indicator assumes that volume, v, is an analogous means of measuring physical mass, m. This premise allows the application of the equations of motion to the movement of financial securities. We know from E=mc^2 that mass has energy. Energy can be used to create motion as kinetic energy. Taking a simple hypothetical example, the interaction of one short seller looking to cover lower and one buyer looking to sell higher exchange shares in a security at an agreed upon price to create volume or mass, and therefore, potential energy. Eventually the short seller will actively cover and buy the security from the previous buyer, moving the security higher, or the buyer will actively sell to the short seller, moving the security lower. The potential energy inherent in the initial consolidation or trading activity between buy and seller is now converted to kinetic energy on the subsequent trading activity that moves the securities price. The more potential energy that is created in the consolidation, the more kinetic energy there is to move price. This is why point and figure traders are said to give price targets based on the level of volatility or size of a consolidation range, or why Gann traders square price and time, as time is roughly proportional to mass and trading activity. The build-up of potential energy between short sellers and buyers in GME or TSLA led to their explosive moves beyond their standard fundamental valuations. Position Position, p, is simply the price or value of a financial security or market internal. Time Time, t, is another means of measuring mass to discover price behavior beyond the time snapshots that simple candle charts provide. We know from E=mc^2 that time is related to rest mass and energy given the speed of light, c, where time ≈ distance * sqrt(mass/E). This relation can also be derived from F=ma. The more mass there is, the longer it takes to compute the physics of a system. The more energy there is, the shorter it takes to compute the physics of a system. Similarly, more time is required to build a “resting” low-volatility trading consolidation with more mass. More energy added to that trading consolidation by competing buyers and sellers decreases the time it takes to build that same mass. Time is also related to price through velocity. Velocity = (p(t1) – p(t0)) / p(t0) Velocity, v, is the relative percent change of a securities price, p, over a period of time, t0 to t1. The period of time is between subsequent candles, and since time is constant between candles within the same timeframe, it is not used to calculate velocity or acceleration. Price moves faster with higher velocity, and slower with slower velocity, over the same fixed period of time. The product of velocity and mass gives momentum. Momentum = mv This indicator uses physics definition of momentum, not finance’s. In finance, momentum is defined as the amount of change in a securities price, either relative or absolute. This is definition is unfortunate, pun intended, since a one dollar move in a security from a thousand shares traded between a few traders has the exact same “momentum” as a one dollar move from millions of shares traded between hundreds of traders with everything else equal. If momentum is related to the energy of the move, momentum should consider both the level of activity in a price move, and the amount of that price move. If we equate mass to volume to account for the level of trading activity and use physics definition of momentum as the product of mass and velocity, this revised definition now gives a thousand-times more momentum to a one-dollar price move that has a thousand-times more volume behind it. If you want to use finance’s volume-less definition of momentum, use velocity in this indicator. Acceleration = v(t1) – v(t0) Acceleration, a, is the difference between velocities over some period of time, t0 to t1. Positive acceleration is necessary to increase a securities speed in the positive direction, while negative acceleration is necessary to decrease it. Acceleration is related to force by mass. Force = ma Force is required to change the speed of a securities valuation. Price movements with considerable force have considerably more impact on future direction. A change in direction requires force. Kinetic Energy = 0.5mv^2 Kinetic energy is the energy that a financial security gains from the change in its velocity by force. The built-up of potential energy in trading consolidations can be converted to kinetic energy on a breakout from the consolidation. Cycle Theory and Relativity Just as the physics of motion is relative to a point of reference, so too should the physics of financial securities be relative to a point of reference. An object moving at a 100 mph towards another object moving in the same direction at 100 mph will not appear to be moving relative to each other, nor will they collide, but from an outsider observer, the objects are going 100 mph and will collide with significant impact if they run into a stationary object relative to the observer. Similarly, trading with a hundred thousand shares at the open when the average volume is a couple million may have a much smaller impact on the price compared to trading a hundred thousand shares pre-market when the average volume is ten thousand shares. The point of reference used in this indicator is the average statistics collected for a given Window Time Frame for every Cycle Time Frame. The physics values are normalized relative to these statistics. Examples The main chart of this publication shows the Force Candles for the SPY. An intense force candle is observed pre-market that implicates the directional overtone of the day. The assumption that direction should follow force arises from physical observation. If a large object is accelerating intensely in a particular direction, it may be fair to assume that the object continues its direction for the time being unless acted upon by another force. The second example shows a similar Force Candle for the SPY that counters the assumption made in the first example and emphasizes the importance of both motion and context. While it’s fair to assume that a heavy highly accelerating object should continue its course, if that object runs into an obstacle, say a brick wall, it’s course may deviate. This example shows SPY running into the 50% retracement wall from the low of Mar 2020, a significant support level noted in literature. The example also conveys Gann’s idea of “lost motion”, where the SPY penetrated the 50% price but did not break through it. A brick wall is not one atom thick and price support is not one tick thick. An object can penetrate only one layer of a wall and not go through it. The third example shows how Volume Candles can be used to identify scalping opportunities on the SPY and conveys why price behavior is as important as motion and context. It doesn’t take a brick wall to impede direction if you know that the person driving the car tends to forget to feed the cats before they leave. In the chart below, the SPY breaks down to a confluence of the 5-day SMA, 20-day SMA, and an important daily trendline (not shown) after the bullish bounce from the 50% retracement days earlier. High volume candles on the SMA signify stopping volume that reverse price direction. The character of the day changes. Bulls become more aggressive than bears with higher volume on upswings and resistance, whiles bears take on a defensive position with lower volume on downswings and support. High volume stopping candles are seen after rallies, and can tell you when to take profit, get out of a position, or go short. The character change can indicate that its relatively safe to re-enter bullish positions on many major supports, especially given the overarching bullish theme from the large reaction off the 50% retracement level. The last example emphasizes the importance of relativity. The Volume Candles in the chart below are brightest pre-market even though the open has much higher volume since the pre-market activity is much higher compared to past pre-markets than the open is compared to past opens. Pre-market behavior is a good indicator for the character of the day. These bullish Volume Candles are some of the brightest seen since the bounce off the 50% retracement and indicates that bulls are making a relatively greater attempt to bring the SPY higher at the start of the day. Infrequently Asked Questions Where do I start? The default settings are what I use to scalp the SPY throughout most of the extended trading day, on a one-minute chart using SPY volume. I also overlay another Candle set containing ES future volume on the SPY price structure by setting the Physics Source to ES1! and the Number of Overlays setting to 2 for each Candle stream in order to account for pre- and post-market trading activity better. Since the closing volume is exponential-like up until the end of the regular trading day, adding additional Candle streams with a tighter Window Time Frame (e.g., 2-5 minute) in the last 15 minutes of trading can be beneficial. The Hide feature can allow you to set certain intraday timeframes to hide one Candle set in order to show another Candle set during that time. How crazy can you get with this indicator? I hope you can answer this question better. One interesting use case is embedding the velocity of market volume onto an internal market structure. The PCTABOVEVWAP.US is a market statistic that indicates the percent of securities above their VWAP among US stocks and is helpful for determining short term trends in the US market. When securities are rising above their VWAP, the average long is up on the day and a rising PCTABOVEVWAP.US can be viewed as more bullish. When securities are falling below their VWAP, the average short is up on the day and a falling PCTABOVEVWAP.US can be viewed as more bearish. (UPVOL.US - DNVOL.US) / TVOL.US is a “spread” symbol, in TV parlance, that indicates the decimal percent difference between advancing volume and declining volume in the US market, showing the relative flow of volume between stocks that are up on the day, and stocks that are down on the day. Setting PCTABOVEVWAP.US in the Candle Source, (UPVOL.US - DNVOL.US) / TVOL.US in the Physics Source, and selecting the Physics to Velocity will embed the relative velocity of the spread symbol onto the PCTABOVEVWAP.US candles. This can be helpful in seeing short term trends in the US market that have an increasing amount of volume behind them compared to other trends. The chart below shows Volume Candles (top) and these Spread Candles (bottom). The first top at 9:30 and second top at 10:30, the high of the day, break down when the spread candles light up, showing a high velocity volume transfer from up stocks to down stocks. How do I plot the indicator distribution and why should I even care? The distribution is visually helpful in seeing how different normalization settings effect the distribution of candle segments. It is also helpful in seeing what physics intensities you want to ignore or show by segmenting part of the distribution within the Min and Max Cutoff values. The intensity of color is proportional to the physics value between the Min and Max Cutoff values, which correspond to the Min and Max Colors in your color scheme. Any physics value outside these Min and Max Cutoffs will be the same as the Min and Max Colors. Select the Print Windows feature to show the window numbers according to the Cycle Time Frame and Window Time Frame settings. The window numbers are labeled at the start of each window and are candle width in size, so you may need to zoom into to see them. Selecting the Plot Window feature and input the window number of interest to shows the distribution of physics values for that particular window along with some statistics. A log-normal volume distribution of segmented z-scores is shown below for 30-minute opening of the SPY. The Min and Max Cutoff at the top of the graph contain the part of the distribution whose intensities will be linearly color-coded between the Min and Max Colors of the color scheme. The part of the distribution below the Min Cutoff will be treated as lowest quality signals and set to the Min Color, while the few segments above the Max Cutoff will be treated as the highest quality signals and set to the Max Color. What do I do if I don’t see anything? Troubleshooting issues with this indicator can involve checking for error messages shown near the indicator name on the chart or using the Data Validation section to evaluate the statistics and normalization cutoffs. For example, if the Plot Window number is set to a window number that doesn’t exist, an error message will tell you and you won’t see any candles. You can use the Print Windows option to show windows that do exist for you current settings. The auto-normalization cutoff values may be inappropriate for your particular use case and literally cut the candles out of the chart. Try changing the chart time frame to see if they are appropriate for your cycle, sample and window time frames. If you get a “Timeframe passed to the request.security_lower_tf() function must be lower than the timeframe of the main chart” error, this means that the chart timeframe should be increased above the sample time frame. If you get a “Symbol resolve error”, ensure that you have correct symbol or spread in the Candle or Physics Source. How do I see a relative physics values without cycles? Set the Window Time Frame to be equal to the Cycle Time Frame. This will aggregate all the statistics into one bucket and show the physics values, such as volume, relative to all the past volumes that TV will allow. How do I see candles without segmentation? Segmentation can be very helpful in one context or annoying in another. Segmentation can be removed by setting the candle resolution value to 1. Notes I have yet to find a trading platform that consistently provides accurate real-time volume and pricing information, lacking adequate end-user data validation or quality control. I can provide plenty of examples of real-time volume counts or prices provided by TradingView and other platforms that were significantly off from what they should have been when comparing against the exchanges own data, and later retroactively corrected or not corrected at all. Since no indicator can work accurately with inaccurate data, please use at your own discretion. The first version is a beta version. Debugging and validating code in Pine script is difficult without proper unit testing. Please report any bugs with enough information to reproduce them and indicate why they are important. I also encourage you to export the data from TradingView and verify the calculations for your particular use case. The indicator works on real-time updates that occur at a higher frequency than the candle time frame, which TV incorrectly refers to as ticks. They use this terminology inaccurately as updates are really aggregated tick data that can take place at different prices and may not accurately reflect the real tick price action. Consequently, this inaccuracy also impacts the real-time segmentation accuracy to some degree. TV does not provide a means of retaining “tick” information, so the higher granularity of information seen real-time will be lost on a disconnect. TV does not provide time and sales information. The volume and price information collected using the Sample Time Frame is intraday, which provides only part of the picture. Intraday volume is generally 50 to 80% of the end of day volume. Consequently, the daily+ OHLC prices are intraday, and may differ significantly from exchanged settled OHLC prices. The Cycle and Window Time Frames refer to calendar days and time, not trading days or time. For example, the first window week of a monthly cycle is the first seven days of the month, not the first Monday through Friday of trading for the month. Chart Time Frames that are higher than the Window Time Frames average the normalized physics for price action that occurred within a given Candle segment. It does not average price action that did not occur. One of the main performance bottleneck in TradingView’s Pine Script is client-side drawing and plotting. The performance of this indicator can be increased by lowering the resolution (the number of sub-candles this indicator plots), getting a faster computer, or increasing the performance of your computer like plugging your laptop in and eliminating unnecessary processes. The statistical integrity of this indicator relies on the number of samples collected per sample window in a given cycle. Higher sample counts can be obtained by increasing the chart time frame or upgrading the TradingView plan for a higher bar count. While increasing the chart time frame doesn’t increase the visual number of bars plotted on the chart, it does increase the number of bars that can be pulled at a lower time frame, up to 100,000. Due to a limitation in Pine Scripts request_lower_tf() function, using a spread symbol will only work for regular trading hours, not extended trading hours. Ideally, velocity or momentum should be calculated between candle closes. To eliminate the need to deal with price gaps that would lead to an incorrect statistical distributions, momentum is calculated between candle open and closes as a percent change of the price or value, which should not be an issue for most liquid securities.
Indicatore Pine Script™
di Techotomy
31
Moving Average Compendium RefurbishedThis is my effort to bring together in a single script the widest range of moving averages possible. I aggregated the calculation of averages within a library. For more information about the library follow the link: Basically this indicator is the visual result of this library. You can choose the moving average and the script updates the chart as per the type. The unique parameters of certain moving averages remain at their default values. To have a rainbow of moving averages I also made an indicator: Available moving averages: AARMA = 'Adaptive Autonomous Recursive Moving Average' ADEMA = '* Alpha-Decreasing Exponential Moving Average' AHMA = 'Ahrens Moving Average' ALMA = 'Arnaud Legoux Moving Average' ALSMA = 'Adaptive Least Squares' AUTOL = 'Auto-Line' CMA = 'Corrective Moving average' CORMA = 'Correlation Moving Average Price' COVWEMA = 'Coefficient of Variation Weighted Exponential Moving Average' COVWMA = 'Coefficient of Variation Weighted Moving Average' DEMA = 'Double Exponential Moving Average' DONCHIAN = 'Donchian Middle Channel' EDMA = 'Exponentially Deviating Moving Average' EDSMA = 'Ehlers Dynamic Smoothed Moving Average' EFRAMA = '* Ehlrs Modified Fractal Adaptive Moving Average' EHMA = 'Exponential Hull Moving Average' EMA = 'Exponential Moving Average' EPMA = 'End Point Moving Average' ETMA = 'Exponential Triangular Moving Average' EVWMA = 'Elastic Volume Weighted Moving Average' FAMA = 'Following Adaptive Moving Average' FIBOWMA = 'Fibonacci Weighted Moving Average' FISHLSMA = 'Fisher Least Squares Moving Average' FRAMA = 'Fractal Adaptive Moving Average' GMA = 'Geometric Moving Average' HKAMA = 'Hilbert based Kaufman\'s Adaptive Moving Average' HMA = 'Hull Moving Average' JURIK = 'Jurik Moving Average' KAMA = 'Kaufman\'s Adaptive Moving Average' LC_LSMA = '1LC-LSMA (1 line code lsma with 3 functions)' LEOMA = 'Leo Moving Average' LINWMA = 'Linear Weighted Moving Average' LSMA = 'Least Squares Moving Average' MAMA = 'MESA Adaptive Moving Average' MCMA = 'McNicholl Moving Average' MEDIAN = 'Median' REGMA = 'Regularized Exponential Moving Average' REMA = 'Range EMA' REPMA = 'Repulsion Moving Average' RMA = 'Relative Moving Average' RSIMA = 'RSI Moving average' RVWAP = '* Rolling VWAP' SMA = 'Simple Moving Average' SMMA = 'Smoothed Moving Average' SRWMA = 'Square Root Weighted Moving Average' SW_MA = 'Sine-Weighted Moving Average' SWMA = '* Symmetrically Weighted Moving Average' TEMA = 'Triple Exponential Moving Average' THMA = 'Triple Hull Moving Average' TREMA = 'Triangular Exponential Moving Average' TRSMA = 'Triangular Simple Moving Average' TT3 = 'Tillson T3' VAMA = 'Volatility Adjusted Moving Average' VIDYA = 'Variable Index Dynamic Average' VWAP = '* VWAP' VWMA = 'Volume-weighted Moving Average' WMA = 'Weighted Moving Average' WWMA = 'Welles Wilder Moving Average' XEMA = 'Optimized Exponential Moving Average' ZEMA = 'Zero-Lag Exponential Moving Average' ZSMA = 'Zero-Lag Simple Moving Average'
Indicatore Pine Script™
di andre_007
10
Day Trade Indicator [by KN Lo]Design for LONG and Day Trade only ============================= features (this indicator is able to): - show EMA 9, 50, 200 & VWAP - show Candle Pattern (e.g. Engulfing, Shooting Star) - show HMA fast(10) / slow(50) lines - show Breakout Signal (Blue triangle) - show RSI Divergence - find Volitility Decreasing - find Consolidation stage - change Background color (green) when positive figures - show indicator table ============================= indicator table: - Price over VWAP - Price over EMA200 - EMA9 > EMA50 > EMA200 - RSI < 80 - EMA9 > VWAP - MACD fast > slow - HMA fast > slow - RSI Divergence (compare with previous higher high) - Breakout Signal when the price is higher than previous high - Volitility: the difference between previous high (9 periods) and previous low (9 periods), average by SMA, if lower than -30, show in green color. - Consolidation: consider previous 7 periods to find consolidation stage.
Indicatore Pine Script™
di knlo
1
CrossFire -=[ CryptDollar ]=-FEATURES DO NOT USE WITHOUT READING ALL OF THIS! Intended to be USED AGAINST Heikin Ashi Averaging Trend Candles for LEGITIMATE ‘AVERAGING’ Trend Recognition and analysis and it is a legitimate mathematical protocol using averages. NOTE: THIS IS NOT A simple “ENTER / EXIT" Type Indicator!!! BE CLEAR ABOUT THAT!! THIS IS A AVERAGE TREND ANALYSIS and Support & Resistance type of indicator ADDITIONAL NOTE: This EMA CROSSING signal indicator DOES NOT REPRINT after the EMA CROSS CONFIRMATION, (Candle Close)!! It may flicker during the confirmation process, which ALL indicator formulas do. PROOF OF THIS is that the Yellow and Light Blue EMAs are IN FULL VIEW where the indications occur. What is a Moving Average Crossover Confirmation?? It is when the selected Moving Averages fully cross each other upon candle close. It is also important to note: The LOWER the Timeframe, the more 'NOISE to signal' ratio you will get with this and ANY other indicator. The HIGHER the Timeframe, the more 'SIGNAL to noise' ratio you will get with this and ANY other indicator. To attain more reliable Trade Planning signals; simply look for signals on the higher TFs, and THEN use the lower, faster-pivoting TFs to limit into position. You should only execute moves AFTER you 'APPROPRIATELY PLAN YOUR TRADE' and decide to 'TRADE YOUR PLAN!' ------------------------------------------ What is included with this EMA Crossing Indicator: Dynamic SR (Horizontal lines of Support and Resistance (which is analyzed against recent average price action). An optional VWAP is included as well ALL of these pop-up indication features can be turned Off or On in settings panel: Also, it is very important to select the dots next to the indicator name on your chart; scroll the drop menu go to "Visibility" > "Bring to Front." so you can see the 2 and 6 EMAs on top of the Heikin Ashi AVERAGING candles. AGAIN, this indicator is based off a known and well established Heikin Ashi EMA Crossing Swing Trading Strategy and is optimized with the use of Heikin Ashi AVERAGING Candles. This contains all of the EMAs related a 2-6-13 Heikin Ashi AVERAGE Trading Strategy. The original strategy for traditional markets used the 17 EMA. But in crypto, I've found that the 13 EMA at least 'seems' to be more relative and consequential as a trend change 'strength' indication. - Includes alerts with "CROSS" indications for the 2 & 6 EMA crossover points.* - ALWAYS check for Trend & Price Support or Resistance (SR) ALONG YOUR TRADE PATH, BEFORE planning your Trade. - DO NOT simply enter trades based on the Cross signals, as these are mere indications of directional change, and make sure you have at least a single candle close confirmation before taking it seriously. - Along with that, there are certain sets of SMAs (21, 50, & 200) that are universally used by famed rock star traders, for both scalping and swing trades, which can be enabled and disabled in the Style Panel Settings. - The optional ARROWS are additional indications for when the 13 EMA , 21 SMA , 50 SMA , and 200 SMA are crossed up or down. Each EMA and SMA has its own alert that you can individually set, along with the primary "CROSS" indication alerts. * Special note regarding the visual indications of the 13 EMA and the 21 SMA If an arrow appears with "13-21" above or below it, that is because these moving averages are so close that for visual notification purposes there was a visual layering issue whenever both of these MAs triggered on same candle. This compensation for the visual indication has no effect on the individual MA's Alert settings. - ALL EMAs and SMAs are customizable if the defaults are not to your liking, BUT understand that any EMA and SMA assignment changes will divert away from the strategy for which this indicator was designed. If you change from the default moving average assignments in the input settings, your changes will unfortunately not be reflected in the "labeling" on the chart or in alerts)!! - All optional are in the settings panel, and all setting listings are easily understandable as to what they are - I was finally able to edit the script to where the labels are not obnoxious on the chart!!! - As with all my indicators so far; I like to include the optional light-white Daily VWAP plot line to save adding an extra indicator if you like to follow the VWAP , as I do. - If your chart seems noisy with everything turned on, you can always disable any of these features that you find yourself not using as a visual reference and then "Save as default" Best Applied to Higher Timeframes With ALL Default “Noisy” Visual Indications Enabled: With Only the Visible Primary Cross Indications Enabled:
Indicatore Pine Script™
di CryptDude
[BUBBLENUKE] BOB The Reversal Trader Indicator=============================================================: BOB The Reversal Trader :============================================================= COMPONENTS: - VWAP Anchored at Friday CME close - Bitcoin CME close - Volume bars DESCRIPTION: BOB is a mean-reversion trading system focused in BTCUSDT asset in the 30M time frame. The system is divided into 2 types of entries: WEEKENDS: BOB will trigger his entry when the price of Bitcoin is at one of the two deviations from the VWAP anchored at Friday CME close INTRA-WEEK: BOB will trigger its entry when the price of Bitcoin is at one of the two deviations from the VWAP anchored at the Friday CME close or when a volume candle indicates a reversal
Indicatore Pine Script™
di UnknownUnicorn2084134
Moving_AveragesLibrary "Moving_Averages" This library contains majority important moving average functions with int series support. Which means that they can be used with variable length input. For conventional use, please use tradingview built-in ta functions for moving averages as they are more precise. I'll use functions in this library for my other scripts with dynamic length inputs. ema(src, len)   Exponential Moving Average (EMA)   Parameters:      src : Source      len : Period   Returns: Exponential Moving Average with Series Int Support (EMA) alma(src, len, a_offset, a_sigma)   Arnaud Legoux Moving Average (ALMA)   Parameters:      src : Source      len : Period      a_offset : Arnaud Legoux offset      a_sigma : Arnaud Legoux sigma   Returns: Arnaud Legoux Moving Average (ALMA) covwema(src, len)   Coefficient of Variation Weighted Exponential Moving Average (COVWEMA)   Parameters:      src : Source      len : Period   Returns: Coefficient of Variation Weighted Exponential Moving Average (COVWEMA) covwma(src, len)   Coefficient of Variation Weighted Moving Average (COVWMA)   Parameters:      src : Source      len : Period   Returns: Coefficient of Variation Weighted Moving Average (COVWMA) dema(src, len)   DEMA - Double Exponential Moving Average   Parameters:      src : Source      len : Period   Returns: DEMA - Double Exponential Moving Average edsma(src, len, ssfLength, ssfPoles)   EDSMA - Ehlers Deviation Scaled Moving Average   Parameters:      src : Source      len : Period      ssfLength : EDSMA - Super Smoother Filter Length      ssfPoles : EDSMA - Super Smoother Filter Poles   Returns: Ehlers Deviation Scaled Moving Average (EDSMA) eframa(src, len, FC, SC)   Ehlrs Modified Fractal Adaptive Moving Average (EFRAMA)   Parameters:      src : Source      len : Period      FC : Lower Shift Limit for Ehlrs Modified Fractal Adaptive Moving Average      SC : Upper Shift Limit for Ehlrs Modified Fractal Adaptive Moving Average   Returns: Ehlrs Modified Fractal Adaptive Moving Average (EFRAMA) ehma(src, len)   EHMA - Exponential Hull Moving Average   Parameters:      src : Source      len : Period   Returns: Exponential Hull Moving Average (EHMA) etma(src, len)   Exponential Triangular Moving Average (ETMA)   Parameters:      src : Source      len : Period   Returns: Exponential Triangular Moving Average (ETMA) frama(src, len)   Fractal Adaptive Moving Average (FRAMA)   Parameters:      src : Source      len : Period   Returns: Fractal Adaptive Moving Average (FRAMA) hma(src, len)   HMA - Hull Moving Average   Parameters:      src : Source      len : Period   Returns: Hull Moving Average (HMA) jma(src, len, jurik_phase, jurik_power)   Jurik Moving Average - JMA   Parameters:      src : Source      len : Period      jurik_phase : Jurik (JMA) Only - Phase      jurik_power : Jurik (JMA) Only - Power   Returns: Jurik Moving Average (JMA) kama(src, len, k_fastLength, k_slowLength)   Kaufman's Adaptive Moving Average (KAMA)   Parameters:      src : Source      len : Period      k_fastLength : Number of periods for the fastest exponential moving average      k_slowLength : Number of periods for the slowest exponential moving average   Returns: Kaufman's Adaptive Moving Average (KAMA) kijun(_high, _low, len, kidiv)   Kijun v2   Parameters:      _high : High value of bar      _low : Low value of bar      len : Period      kidiv : Kijun MOD Divider   Returns: Kijun v2 lsma(src, len, offset)   LSMA/LRC - Least Squares Moving Average / Linear Regression Curve   Parameters:      src : Source      len : Period      offset : Offset   Returns: Least Squares Moving Average (LSMA)/ Linear Regression Curve (LRC) mf(src, len, beta, feedback, z)   MF - Modular Filter   Parameters:      src : Source      len : Period      beta : Modular Filter, General Filter Only - Beta      feedback : Modular Filter Only - Feedback      z : Modular Filter Only - Feedback Weighting   Returns: Modular Filter (MF) rma(src, len)   RMA - RSI Moving average   Parameters:      src : Source      len : Period   Returns: RSI Moving average (RMA) sma(src, len)   SMA - Simple Moving Average   Parameters:      src : Source      len : Period   Returns: Simple Moving Average (SMA) smma(src, len)   Smoothed Moving Average (SMMA)   Parameters:      src : Source      len : Period   Returns: Smoothed Moving Average (SMMA) stma(src, len)   Simple Triangular Moving Average (STMA)   Parameters:      src : Source      len : Period   Returns: Simple Triangular Moving Average (STMA) tema(src, len)   TEMA - Triple Exponential Moving Average   Parameters:      src : Source      len : Period   Returns: Triple Exponential Moving Average (TEMA) thma(src, len)   THMA - Triple Hull Moving Average   Parameters:      src : Source      len : Period   Returns: Triple Hull Moving Average (THMA) vama(src, len, volatility_lookback)   VAMA - Volatility Adjusted Moving Average   Parameters:      src : Source      len : Period      volatility_lookback : Volatility lookback length   Returns: Volatility Adjusted Moving Average (VAMA) vidya(src, len)   Variable Index Dynamic Average (VIDYA)   Parameters:      src : Source      len : Period   Returns: Variable Index Dynamic Average (VIDYA) vwma(src, len)   Volume-Weighted Moving Average (VWMA)   Parameters:      src : Source      len : Period   Returns: Volume-Weighted Moving Average (VWMA) wma(src, len)   WMA - Weighted Moving Average   Parameters:      src : Source      len : Period   Returns: Weighted Moving Average (WMA) zema(src, len)   Zero-Lag Exponential Moving Average (ZEMA)   Parameters:      src : Source      len : Period   Returns: Zero-Lag Exponential Moving Average (ZEMA) zsma(src, len)   Zero-Lag Simple Moving Average (ZSMA)   Parameters:      src : Source      len : Period   Returns: Zero-Lag Simple Moving Average (ZSMA) evwma(src, len)   EVWMA - Elastic Volume Weighted Moving Average   Parameters:      src : Source      len : Period   Returns: Elastic Volume Weighted Moving Average (EVWMA) tt3(src, len, a1_t3)   Tillson T3   Parameters:      src : Source      len : Period      a1_t3 : Tillson T3 Volume Factor   Returns: Tillson T3 gma(src, len)   GMA - Geometric Moving Average   Parameters:      src : Source      len : Period   Returns: Geometric Moving Average (GMA) wwma(src, len)   WWMA - Welles Wilder Moving Average   Parameters:      src : Source      len : Period   Returns: Welles Wilder Moving Average (WWMA) ama(src, _high, _low, len, ama_f_length, ama_s_length)   AMA - Adjusted Moving Average   Parameters:      src : Source      _high : High value of bar      _low : Low value of bar      len : Period      ama_f_length : Fast EMA Length      ama_s_length : Slow EMA Length   Returns: Adjusted Moving Average (AMA) cma(src, len)   Corrective Moving average (CMA)   Parameters:      src : Source      len : Period   Returns: Corrective Moving average (CMA) gmma(src, len)   Geometric Mean Moving Average (GMMA)   Parameters:      src : Source      len : Period   Returns: Geometric Mean Moving Average (GMMA) ealf(src, len, LAPercLen_, FPerc_)   Ehler's Adaptive Laguerre filter (EALF)   Parameters:      src : Source      len : Period      LAPercLen_ : Median Length      FPerc_ : Median Percentage   Returns: Ehler's Adaptive Laguerre filter (EALF) elf(src, len, LAPercLen_, FPerc_)   ELF - Ehler's Laguerre filter   Parameters:      src : Source      len : Period      LAPercLen_ : Median Length      FPerc_ : Median Percentage   Returns: Ehler's Laguerre Filter (ELF) edma(src, len)   Exponentially Deviating Moving Average (MZ EDMA)   Parameters:      src : Source      len : Period   Returns: Exponentially Deviating Moving Average (MZ EDMA) pnr(src, len, rank_inter_Perc_)   PNR - percentile nearest rank   Parameters:      src : Source      len : Period      rank_inter_Perc_ : Rank and Interpolation Percentage   Returns: Percentile Nearest Rank (PNR) pli(src, len, rank_inter_Perc_)   PLI - Percentile Linear Interpolation   Parameters:      src : Source      len : Period      rank_inter_Perc_ : Rank and Interpolation Percentage   Returns: Percentile Linear Interpolation (PLI) rema(src, len)   Range EMA (REMA)   Parameters:      src : Source      len : Period   Returns: Range EMA (REMA) sw_ma(src, len)   Sine-Weighted Moving Average (SW-MA)   Parameters:      src : Source      len : Period   Returns: Sine-Weighted Moving Average (SW-MA) vwap(src, len)   Volume Weighted Average Price (VWAP)   Parameters:      src : Source      len : Period   Returns: Volume Weighted Average Price (VWAP) mama(src, len)   MAMA - MESA Adaptive Moving Average   Parameters:      src : Source      len : Period   Returns: MESA Adaptive Moving Average (MAMA) fama(src, len)   FAMA - Following Adaptive Moving Average   Parameters:      src : Source      len : Period   Returns: Following Adaptive Moving Average (FAMA) hkama(src, len)   HKAMA - Hilbert based Kaufman's Adaptive Moving Average   Parameters:      src : Source      len : Period   Returns: Hilbert based Kaufman's Adaptive Moving Average (HKAMA)
Libreria Pine Script™
di MightyZinger
NoBrain BreakoutUse 3min. Time frame. Buy Stock Selection:- When Close Price Cross Monthly Standard Pivot R1 & Monthly Standard Pivot R1 is Greater than Previous Day High( PDH ) Or Close. Price must be Above 44 MA ,48 EMA & Vwap ***Buy When 3min Candle closed Above Camarilla R4 or Monthly Standard Pivot R1 whichever is High. Sell Stock Selection:- When Close Price Cross Monthly Standard Pivot S1 & Monthly Standard Pivot S1 is Less than Previous Day Low( PDL ) Or Close. Price must be Below 44 MA ,48 EMA & Vwap ***Sell When 3min Candle closed Below Camarilla S4 or Monthly Standard Pivot S1 whichever is Low. Trading time for 1st wave 9.30am to 10.45am. 2nd wave 12.45pm to 2.45pm. (Based on NSE/ BSE India) Indicators:- 1) Pivot Points Standard - Time Frame monthly.only select R1 2) Pivot Points Camarilla- Only select R4. 3) SMA 44 4) EMA 48 5) Vwap 6) For Trailing Stop Loss use SuperTrend- Length-13 Factor-2.7 or Length-15 Factor-3 (3min Timeframe)
Indicatore Pine Script™
di jxmodi
3
Trading Assistant DiNGUETrading Assistant DiNGUE This indicator is like a trading assistant for your charts. It helps set your biases and emotions aside and lets you focus on managing trades in an easy visual way. Get various types of signals to enter your trades (either Long or Short). Then use take profits, stops, or the opposite signal to exit trades. The signals are created from various indicators and sensibility options you can customize any way you want. Works on every timeframe. You can customize every setting or used the preset ones. Preset settings adjust automatically based on the timeframe you are using on the chart. The 12 Indicators are Volume - RSI - Stochastic - MacD - Moving Averages (MA) - Rate of Change (ROC) - ADX DMI Directional Movement Index - On Balance Volume (OBV) - Bollinger Bands - VWAP - ATR - Parabolic SAR. Every indicator can be turned On or Off. You can adjust the way it creates signals by selecting either 'rise-fall', 'crosses' or by combining both. You can select the sensitivity of the signal from Normal - Safe - Safer. You can adjust lengths or use the preset ones. There are also additional options for each indicator, you can filter weak levels for ADX, filter for tight bands, have ROC above 0… You can also plot several of those indicators on the screen. 2x Moving Averages, 2x VWAP, 2x ATR, 2x SAR for even easier visualization of the trend. You can also plot fractals to facilitate once again on trend visualization. Higher high, lower low, higher low, lower high. Trade with the Trend and Safe Trades: If you want to have a higher chance of success, you can trade with the trend. First, select the trend timeframe you would like to use. Let's say the “Weekly” trend. Meaning it will generate a signal on the weekly timeframe and based on the result (Long or Short) it will only take trades in that direction. So the trend is LONG on the Weekly and you get a “Long” signal, it will take it. “Short” signals on the other hand will be treated as “stops” and won’t want to go against the trend by going ‘short’. Safe Trend works in the same manner, but instead of using the signal on a bigger timeframe, it uses an indicator as to the deciding factor. Let's say you select the 200SMA as the “Safe signal”. The indicator will only go “Long” when above the 200SMA and “Short” under the 200SMA. Otherwise, it will put a stop instead of going against the trend. Stop Loss: There are 4 different types of stop-loss that you can use at the same time. - Indicator Stop - Fib stop - Fix % stop - Trailing stop You can plot the stops directly on the chart AND OR add them to the panel for an easy visualization once again. With the ‘indicator stop’, you can select one of the two: MA ATR SAR VWAP as a stop. Fib stop, it uses fib numbers to calculate a stopping point. Fix %, you can select your max loss in percent. Could be 2%, 5% A trailing stop is like a fixed stop but that will trail as the price moves in the right direction. Take Profit: There are 4 different types of take profit that you can use simultaneously. - Fix % Take Profit - ATR multiple Take Profit - Fib multiple Take Profit - Bollinger Band Take Profit Fix % just let you set a fix take profit target in percent. ATR multiple lets you select a target based on a multiple of the average true range. Fib multiple lets you select a target based on a fib multiple Bolling Band lets you take profit based on the Bollinger band settings you select. Visual Panel: The visual panel lets you see exactly how is the last trade progressing. It will give you the entry price, profit, stop, and target. You can turn it on or off, as is for the stop and target. You can also decide to plot 1 position or more, you can even show all the possible signals, add backgrounds with colors. You can also plot the bigger Trend and Safe Signals explained above. If you have any questions, suggestions, or comments, feel free to do so!
Indicatore Pine Script™
di CryptoDINGUE
282