Inizia

Cerca negli script per "科创50成分股"

CyclesThis is a modified Stochastic indicator. Modifications include: 1. The output is now centered on "0" and the scale is from -50 to +50, so that histograms and columns can be used to plot the output. 2. Added visual trade setup triggers. A trigger to the up side is a cycle high and indicates a "sell signal". A trigger to the down side is a cycle low and indicates a "buy" signal. 3. Added an alert trigger to be used to setup alerts. Selecting "Alert" to be Greater Than (>) Value = 0.00 will trigger an alert if either the buy or sell triggers occur. 4. Added a force indicator output. This indicates the rate of change in "D", or mathematically "dD/dt", as was done in the Power Analyzer indicator. When Force and D are in-phase, the maximum power is achieved. 5. Added "Slow Average Momentum" and "Slow Average Force" as was done in the Power Analyzer indicator. 6. Added an internal MACD and EMA as part of the trade setup trigger equation. There is a new input variable for the EMA length. 7. Added an input variable for the "Trigger Threshold", which ranges from -50 to 50, to be used as a screening filter.
Indicatore Pine Script®
di FXEngineering
5
BTC Volume Contango IndexBased on my previous script "BTC Contango Index" which was inspired by a Twitter post by Byzantine General: This is a script that shows the contango between spot and futures volumes of Bitcoin to identify overbought and oversold conditions. When a market is in contango, the volume of a futures contract is higher than the spot volume. Conversely, when a market is in backwardation, the volume of the futures contract is lower than the spot volume. The aggregate daily volumes on top exchanges are taken to obtain Total Spot Volume and Total Futures Volume. The script then plots (Total Futures Volume/Total Spot Volume) - 1 to illustrate the percent difference (contango) between spot and futures volumes of Bitcoin. This data by itself is useful, but because aggregate futures volumes are so much larger than spot volumes, no negative values are produced. To correct for this, the Z-score of contango is taken. The Z-score (z) of a data item x measures the distance (in standard deviations StdDev) and direction of the item from its mean (U): Z-score = (x - U) / StDev A value of zero indicates that the data item x is equal to the mean U, while positive or negative values show that the data item is above or below the mean (x Values of +2 and -2 show that the data item is two standard deviations above or below the chosen mean, respectively, and over 95.5% of all data items are contained within these two horizontal references). We substitute x with volume contango C, the mean U with simple moving average ( SMA ) of n periods (50), and StdDev with the standard deviation of closing contango for n periods (50), so the above formula becomes: Z-score = (C - SMA (50)) / StdDev(C,50). When in contango, Bitcoin may be overbought. When in backwardation, Bitcoin may be oversold. The current bar calculation will always look incorrect due to TV plotting the Z-score before the bar closes.
Indicatore Pine Script®
di MartinShkreIi
6
Bank Nifty VolumeWhy this Script : Nifty 50 does not provide volume and some time it is really useful to understand the volume . This is the pine script which calculate the nifty 50 volume . Logic : Take each stock contribute to nifty 50 and find it's volume . Multiply the same with contribution percentage of the same on Nifty 50 Add up all of them and find the total volume . I took the open source code from @daytraderph script called, Custom Volume I will make sure I will update the contribution percentage of all stocks my self instead o you update using input methods. This is the difference. Some people don't know where to look at this to update the value, so for them this script might be useful. And this is the only difference comparing to Custom Volume script.
Indicatore Pine Script®
di shijithlal
24
Probability: Bull/Bear Dominance | Ratio | Bar CountIntro What's the probability of the next bar being red? How about green? Well, there are many ways to quantify the probability but I am presenting just one stupidly simple (but generally accurate) way to measure it. Strangely... no one has done this before that I can find. I try to check if someone else has done it first (Pro Tip: Plz do this. We honestly don't need the 5 trillionth "MTF MAs" script.) Indicator Its a basic counting script, but the nice thing about this script is you choose the time range. It starts counting from a specified point of your choosing. It counts up the bull bars and bear bars separately. Bull Bar = Close > Open Bear Bar = Open > Close You can look at them in sum or as a ratio of Green Bars : Red Bars I know, it's almost too simple. But, here's some interesting food for thought from a layman to fellow laymen. Analysis/Edge Between the time of candle open and candle close, the price can do one of three things, close higher, close lower, or close equal to. 'Equal to' is rare on higher timeframes in liquid markets and it provides no useful information. Thus, we'll nix it for purposes of this conversation. So boil it down. The next candle is going to be a red candle or a green candle. It is popular to refer to the general probability of most candles as 50/50, with trader's mission in life being to seek an edge that tilts the probabilities slightly in their favor. The truth is the odds are probably never actually 50/50, but knowing the precisely correct probability is unknowable, just like the accuracy of a weather forecast is inherently unknowable. What we're trying to do as traders is develop systems that give us predictive probabilistic outcomes that correspond with future realities based on various ways of measuring the market (most often heavily dependent on the past). The reality is that the market can be measured in many, many different ways. The important thing is that you measure it in a way that is accurate, relevant, and universally applicable. So look at this indicator here: You start from a point in time on a chosen timeframe and you put red bars in the red column, green in the green column, and count them all up. Then you make a ratio, in this case, Green : Red. What the ratio shows you is the percentage of green bars compared to red bars . At the time of this screenshot, the 4h on the SPX starting from the 2020 bottom is showing a ratio of 1.2. This means there have been 20% more green bars than there have been red bars. Now there are 1,000 directions you can take this discussion. What is the overall volatility picture, the size of the red bars vs the green bars, what happens if you miss out on the 5 biggest green bars... so many more variables that you would need to take into account to develop a true edge from this idea. But, the bottom line fact (which is what I like about this) is that we can take this data and say with a certain level of confidence that on the SPX you have a 20% better shot at making money (otherwise stated there's a 60/40 chance) if you open a LONG trade at the beginning of a 4h candle than if you open a short. That's useful information. One could argue that it's not a complete strategy in and of itself (although I bet it could be with a couple of additional parameters). But I can tell you, based on the 4h candles in the 2020 rally if you open a short, the deck is stacked against you from this perspective. And we can actually somewhat demonstrate this to be true for our dataset because we can look at the price history and see who likely made more money. The SPX is up 1000pts off the bottom. So, thus far, for this dataset, it rings true; Bulls have been doing way better in the latter part of 2020 than the bears. Conclusion Predictive systems with a small number of variables tend to be more robust than a system with many variables when applied to a complex system. I may keep updating this script if people like it and determine aspects like population vs sample size, confidence intervals, volatility, and exclusion of outliers. For now, this is just an opening foray into the basic idea of how we can establish an edge in the markets. It really can be this simple. Thanks for Reading.
Indicatore Pine Script®
di kurtsmock
9
WR% VARIATIONThis indicator plot the change of the William R%. We have 3 hlines, 50, 0, -50 You can use this as a confirmation indicator for different entries: ENTRIES When change is higher than 50 we have a strong LONG signal When change is lower than -50 we have a strong SHORT signal CONTINUATION TRADES When we are in a Bull Market, candle is red and change crossover the 0 line, we have a LONG continuation trade When we are in a Bear Market, candle is green and change crossunder the 0 line, we have a SHORT continuation trade EXITS When we are in a Bull Market, candle is green and change crossunder the 0 line, we have an Exit, or a Reversal When we are in a Bear Market, candle is read and change crossover the 0 line, we have an Exit, or a Reversal
Indicatore Pine Script®
di Blackboxdev
RISK-OFF.RISK.ON-ppxdf.v3======================================= RISK-OFF & RISK ON INDEX ================================================ 1. Stock Price Momentum: Measuring the Standard & Poor's 500 Index ( S&P 500 ) versus its 125-day moving average (MA) 2. Stock Price Strength: Calculating the number of stocks hitting 52-week highs versus those hitting 52-week lows on the New York Stock Exchange (NYSE) 3. Stock Price Breadth: Analyzing trading volumes in rising stocks against declining stocks 4. Put and Call Options: How much do put options lag behind call options, signifying greed, or surpass them, indicating fear 5. Junk Bond Demand: Gauging appetite for higher risk strategies by measuring the spread between yields on investment-grade bonds and junk bonds 6. Market Volatility: CNN measures the Chicago Board Options Exchange Volatility Index ( VIX ), concentrating on a 50-day MA 7. Safe Haven Demand: The difference in returns for stocks versus treasuries Each of these seven indicators is measured on a scale from 0 to 100, with the index being computed by taking an equal-weighted average of each of them. A reading of 50 is deemed NEUTRAL. Above 50 signals the market with RISK-ON. (GREED) Below 50, Signals the market with RISK-OFF (FEAR) 8
Indicatore Pine Script®
di ppxdff
3
Ultimate Moving Average Package (17 MA's)Included is the: VWAP Current time frame 10 EMA Current time frame 20 EMA Current time frame 50 EMA Current time frame 10 SMA Current time frame 20 SMA Current time frame 50 SMA Daily 10 EMA Daily 20 EMA Daily 50 EMA Daily 50 SMA Daily 100 SMA Daily 200 SMA Weekly 100 SMA Weekly 200 SMA Monthly 100 SMA Monthly 200 SMA All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
Indicatore Pine Script®
di Craig_Stine
OVL_Kikoocycle Beta_Pine3This script use : - A custom Chande Kroll Stop for generate the channel - Some custom Parabolic S.A.R for generate cycles This script can be separated into 3 categories: - Channel Kroll generator : one layer for the actual interval and a layer for a Large Timeframe .(with ratio) - "Range" generator : one layer for actual Interval and a layer for a Large Timeframe.(with automique ratio) -Targets generator : one layer for actual interval with different trend. "Channel Kroll" : - I "hijack" the Chande Kroll Stop formula with custom parameters for generate this channel. Overall, it works like other types of channels like BB, etc... A midline and two borders. The thickness of the borders are relatively important here. A thick border shows some resistance of the area. And so the probability of seeing the market return to its first contact is stronger. While a very thin and vertical border would rather play the role of a breach, a bit like the idea of gaps. Often the market seems to want to go after several cycles. You can activate its Large TimeFrame version, its midline is strong and fine borders helps to judge the risk. SARget + "SAR Limited" : - (S.A.R + targets) The philosophy of this function is simple... When a small cycle is broken, it creates a mark on a higher cycle. So on until the SAR called "SAR Limited". For simplicity, imagine a fractal image but inverted ... Break the small figure, it will mark the larger figure at this time but to get there you still have to make the way to the small figure. Targets are : cross ("+") for fast targets(hidden by default because, theire work only on lower interval), squares (for medium trend), Xcross(for large trend) and red cross(they try to find a large contexte). When a target proc, it is for later (market need some cycles for going to, but it is relative to your interval). This gives you speculative goals. Why 2 targets for a same type and a triangle with a 90deg angle : This give a potential area for management.The triangle help to visualize the SAR and to juge the market reaction. You need to adapte your trade with that... Targets may be slightly too far because I am a bad coder... Currently the targets appear at the moment of rupture but it would be necessary to wait for the end of the breaking movement. Which can bring a positional error if the break is violent. RnG and LTF RnG : - Attempt to generate a Fibo range for each cycle and see interressing areas to enter or exit. This is played with the same philosophy as the Fibo extensions and retracement. When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. As long as the market is out of the middle zone (the 3 lines) keep in mind the past RnG. When the market is out of range, you can use the FibRetracement tool for have extensions. One point at each end, as on the presentation graph. (Values 1.14, 1.272, 1.414, 1.618, 1.786, 2, 2.4 and 4 work well.) If too extrem you can active the LTF version. Never fomo a break, market like to pull a level... Observe and be patient. It's easier to use than to explain xD NB : Do not use the LTF as context. For this, it is better to look at a higher interval. I invite you to look in the style tab of the script and deselect the plots named UNCHECKEME, this will ease your browser.
Indicatore Pine Script®
di Twigho
2
Amazing Crossover System - 100+ pips per day!I got the main concept for this system on another site. While I have made one important change, I must stress that the heart of this system was created by someone else! We must give credit where credit is due! Y'all know baby pips. @ForexPhantom published about this system and did both back and forward test around 10 years ago. I found it on the sit and now I put it to code to see how it performs. I assume 10 points spread for every trade. I use Renesource or AxiTrader to get the low spreads. There are 2 mods, the single trades and constant trading on the direction. Main concept Indicators 5 EMA -- YELLOW 10 EMA -- RED RSI (10 - Apply to Median Price: HL/2) -- One level at 50. TIME FRAME 1 Hour Only (very important!) PAIRS Virtually any pair seems to work as this is strictly technical analysis. I recommend sticking to the main currencies and avoiding cross currencies (just his preference). WHEN TO ENTER A TRADE Enter LONG when the Yellow EMA crosses the Red EMA from underneath. RSI must be approaching 50 from the BOTTOM and cross 50 to warrant entry. Enter SHORT when the Yellow EMA crosses the Red EMA from the top. RSI must be approaching 50 from the TOP and cross 50 to warrant entry. I've attached a picture which demonstrates all these conditions. That's it! f.bpcdn.co
Strategia Pine Script®
di DevLucem
7
MFIww MFI/RSI_v2[wozdux]A new version of the indicator Mfi_v2. Added new control parameters. tt - the averaging period of the volume. Len - the period for calculating the MPI. nn-averaging period MFI (blue line). level-critical levels from below and above (black horizontal lines). Level 0 or 50 - switch between different histogram views with the middle at either level 50 or level 0. key level-key to remove black critical levels. key ema (MFI, nn) - key to remove mfi averaging (blue line). key color-key to remove histogram coloring. key colomns a-line - key switching modes represent the mfi histrogram or line. --------------------------- Новая версия индикатора MFIww_v2. Добавлены новые управляющие параметры. tt- период усреднения объема. Len - период вычисления MFI. nn- период усреднения MFI (голубая линия). level- критические уровни снизу и сверху (черные горизонтальные линии). Level 0 or 50 - переключение между разными представлениями гистрограммы с серединой либо на уровне 50 , либо на уровне 0. key level- ключ убрать черные критические уровни. key ema(mfi,nn) - ключ убрать усреднение mfi (голубая линия). key color- ключ убрать расцветку гистрограммы. key colomns-line - ключ переключения режимов представления mfi гистрограммой или линией.
Indicatore Pine Script®
di wozdux
GoTiT|Simple Auto Fib v1.0Simple Auto Fib! Notes: 1. Always set the trend manually! Don't rely on the auto trend detection. 2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle. 3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs. 4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows. 5. The offset parameters change the behavior of the Length parameter. Example 1: Length = 100 High Offset = 0 Low Offset = 0 This is the default behavior, and the search for highs and lows occurs on the last 100 candles. Example 2: Length = 50 High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back) Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back) In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there. 6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1. 7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
Indicatore Pine Script®
di gotit
MACD + Stochastic + RSI (Long + Short)My strategy uses a combination of three indicators MACD Stochastic RSI . The Idea is to GO LONG when ( MACD > Signal and RSI > 50 and Stochastic > 50) occures at the same time and GO SHORT when ( MACD < Signal and RSI < 50 and Stochastic < 50) This strategy works well on futures and stocks especially during market breaking up after consolidation The best results are on Daily charts , so its NOT a scalping strategy. But it can work also on 1H charts. The strategy does not have any stops and profit targets, so we can take all the market can give us at the moment. The exit point only when MACD goes under/over Signal line Its Preformance is quite stable. So, use it, trade it. If it will help you to imprive your trading results, please donate me BTC: 12kd1F8buWisUBdq27BBwRkUvzW7Ey3og5
Strategia Pine Script®
di x001tk
8
Trend Lines and MoreMulti-Indicator consisting of several useful indicators in a single package. TREND LINES -By default the 20 SMA and 50 SMA are shown. -Use "MOVING AVERAGE TYPE" to select SMA, EMA, Double-EMA, Triple-EMA, or Hull. -Use "50 MA TREND COLOR" to have the 50 turn green/red for uptrend/downtrend. -Use "DAILY SOURCE ONLY" to always show daily averages regardless of timeframe. -Use "SHOW LONG MA" to also include 100, 150, and 200 moving averages. -Use "SHOW MARKERS" to show a small colored marker identifying which line is which. OTHER INDICATORS -You can show Bollinger Bands and Parabolic SAR. -You can highlight key reversal times (9:50-10:10 and 14:40-15:00). -You can show price offset markers, where was the price "n" periods ago. That last one is useful to show the level of prices which are about to "fall off" the moving average and be replaced with current price. So for example, if current price is significantly below the 200-days-ago price, you can gauge the difficulty for the 200 MA to start climbing again.
Indicatore Pine Script®
di nj_guy72
4
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels. There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example: - EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type) - EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type) - D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types) - H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types) - +1 extra MA type/timeframe for BB compile time: 25-30 sec full redraw time after parameter change in UI: 3 sec There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +2 custom Timeframes for each group (2x5 MTF) - Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options - Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI - Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols Features: - 4x3 = 12 MAs of any type including Hull Moving Average (HMA) - 4x MTF groups with step line smoothing - BB +1 extra TF/type for BB MAs - 12 MA levels with adjustable group offsets, indents and shift - show max bars back - you can show/hide both groups of MAs/levels and individual MAs Notes: 1. based on 3EmaBB, uses plot*, barssince and security functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version 3. Levels = trackprice implementation 4. Show Max Bars Back = show_last implementation 5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2 6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params 7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it MTF Notes: - uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2 - Groups that are not assigned a Custom TF will use Current Timeframe (0). - MTF will work for any MA type assigned to the group - MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF. - MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF. Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment). - Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na. - MTF MA Value fluctuation is possible on the current bar due to default security lookahead Smoothing: - X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs) - X == 0, Y > 0 - X,Y smoothing applied to all TFs - Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled - X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar. X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details. A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed. Show Max Bars Back: - can't set plot show_last from input -> implemented using a timenow based range check - you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay) Levels: You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is: - you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide - you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels - there's no other way of creating a dynamic level: hline, plot, offset - nothing else works. - you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling. - from input you can only adjust offset, indent and shift for each level group, and change color - the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift. To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints. Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors. Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Indicatore Pine Script®
di RagingRocketBull
7
Simple_longshort_signalsLong Entry Criteria: 1) Green candle close above 50MA 2) Green candle close above 20MA 3) MA of RSI(14) is cross upward 50 Result: displays green up arrow Long Exit Criteria: 1) Three red candles in a row 2) Any candle close bellow 20MA 3) MA of RSI(14) cross downward 50 Result: displays green diamond Short Entry 1) Red candle close bellow 50MA 2) Red candle close bellow 20MA 3) MA of RSI(14) is cross downward 50 Result: displays red down arrow Short Exit Criteria 1) Three green candles in a row 2) Any candle close above 20MA 3) MA of RSI(14) is cross upward 50 Result: displays red diamond
Indicatore Pine Script®
di kokosro
1
GoldenCross by PuffyThis is a simple trading strategy that seeks the Golden Cross and Death Cross on the 4HR chart. The fast moving indicator in this strategy is the EMA 50 and the slow moving indicator is the EMA 200. When the EMA 50 crosses over the EMA 200 the strategy indicates a buy. When the EMA 50 crosses below the EMA 200 the strategy indicates a sell. This strategy averages trades in the 40 - 50 day range and as such should not be used with heavy leverage.
Strategia Pine Script®
di Puffy23
6
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it. the 20/50/100/200 EMAs should be used together as support and resistance as normal. Wait for price to break 200 EMA Wait for 50 EMA to cross 200 EMA Wait for pullback to 50 EMA to open position 20 and 100 EMAs are for extra information about moving support and resistance and 13/34 EMAs should be used in conjunction When 13 EMA crosses 34 EMA, open position When price gets far from 13/34, close position (because price will attempt to revert back to mean) This is better for scalping and swing trades than the 20/50/100/200 setup. Twitter: @AzorAhai06
Indicatore Pine Script®
di AzorAhai06
Price vs VolImproved version of OBV/price (this one actually works) Both lines show where price is going relative to volume metrics (one line uses OBV, the other uses accumulation/distribution). Green and above 50 means price is rising faster then buying volume Red and below 50 means price is falling faster then selling volume you can add smoothing in the controls and color will go according to raw (even if smoothing goes above/below 50) under the hood: changes price, OBV and AD to RSI for comparability, calculates the difference between price and the others, then an RSI on the result to create an <50< style indicator. this script replaces the previouse from:
Indicatore Pine Script®
di gb50k
1
ALT Risk Metric StrategyHere's a professional write-up for your ALT Risk Strategy script: ALT/BTC Risk Strategy - Multi-Crypto DCA with Bitcoin Correlation Analysis Overview This strategy uses Bitcoin correlation as a risk indicator to time entries and exits for altcoins. By analyzing how your chosen altcoin performs relative to Bitcoin, the strategy identifies optimal accumulation periods (when alt/BTC is oversold) and profit-taking opportunities (when alt/BTC is overbought). Perfect for traders who want to outperform Bitcoin by strategically timing altcoin positions. Key Innovation: Why Alt/BTC Matters Most traders focus solely on USD price, but Alt/BTC ratios reveal true altcoin strength: When Alt/BTC is low → Altcoin is undervalued relative to Bitcoin (buy opportunity) When Alt/BTC is high → Altcoin has outperformed Bitcoin (take profits) This approach captures the rotation between BTC and alts that drives crypto cycles Key Features 📊 Advanced Technical Analysis RSI (60% weight): Primary momentum indicator on weekly timeframe Long-term MA Deviation (35% weight): Measures distance from 150-period baseline MACD (5% weight): Minor confirmation signal EMA Smoothing: Filters noise while maintaining responsiveness All calculations performed on Alt/BTC pairs for superior market timing 💰 3-Tier DCA System Level 1 (Risk ≤ 70): Conservative entry, base allocation Level 2 (Risk ≤ 50): Increased allocation, strong opportunity Level 3 (Risk ≤ 30): Maximum allocation, extreme undervaluation Continuous buying: Executes every bar while below threshold for true DCA behavior Cumulative sizing: L3 triggers = L1 + L2 + L3 amounts combined 📈 Smart Profit Management Sequential selling: Must complete L1 before L2, L2 before L3 Percentage-based exits: Sell portions of position, not fixed amounts Auto-reset on re-entry: New buy signals reset sell progression Prevents premature full exits during volatile conditions 🤖 3Commas Automation Pre-configured JSON webhooks for Custom Signal Bots Multi-exchange support: Binance, Coinbase, Kraken, Bitfinex, Bybit Flexible quote currency: USD, USDT, or BUSD Dynamic order sizing: Automatically adjusts to your tier thresholds Full webhook documentation compliance 🎨 Multi-Asset Support Pre-configured for popular altcoins: ETH (Ethereum) SOL (Solana) ADA (Cardano) LINK (Chainlink) UNI (Uniswap) XRP (Ripple) DOGE RENDER Custom option for any other crypto How It Works Risk Metric Calculation (0-100 scale): Fetches weekly Alt/BTC price data for stability Calculates RSI, MACD, and deviation from 150-period MA Normalizes MACD to 0-100 range using 500-bar lookback Combines weighted components: (MACD × 0.05) + (RSI × 0.60) + (Deviation × 0.35) Applies 5-period EMA smoothing for cleaner signals Color-Coded Risk Zones: Green (0-30): Extreme buying opportunity - Alt heavily oversold vs BTC Lime/Yellow (30-70): Accumulation range - favorable risk/reward Orange (70-85): Caution zone - consider taking initial profits Red/Maroon (85-100+): Euphoria zone - aggressive profit-taking Entry Logic: Buys execute every candle when risk is below threshold As risk decreases, position sizing automatically scales up Example: If risk drops from 60→25, you'll be buying at L1 rate until it hits 50, then L2 rate, then L3 rate Exit Logic: Sells only trigger when in profit AND risk exceeds thresholds Sequential execution ensures partial profit-taking If new buy signal occurs before all sells complete, sell levels reset to L1 Configuration Guide Choosing Your Altcoin: Select crypto from dropdown (or use CUSTOM for unlisted coins) Pick your exchange Choose quote currency (USD, USDT, BUSD) Risk Metric Tuning: Long Term MA (default 150): Higher = more extreme signals, Lower = more frequent RSI Length (default 10): Lower = more volatile, Higher = smoother Smoothing (default 5): Increase for less noise, decrease for faster reaction Buy Settings (Aggressive DCA Example): L1 Threshold: 70 | Amount: $5 L2 Threshold: 50 | Amount: $6 L3 Threshold: 30 | Amount: $7 Total L3 buy = $18 per candle when deeply oversold Sell Settings (Balanced Exit Example): L1: 70 threshold, 25% position L2: 85 threshold, 35% position L3: 100 threshold, 40% position (final exit) 3Commas Setup Bot Configuration: Create Custom Signal Bot in 3Commas Set trading pair to your altcoin/USD (e.g., ETH/USD, SOL/USDT) Order size: Select "Send in webhook, quote" to use strategy's dollar amounts Copy Bot UUID and Secret Token Script Configuration: Paste credentials into 3Commas section inputs Check "Enable 3Commas Alerts" Save and apply to chart TradingView Alert: Create Alert → Condition: "alert() function calls only" Webhook URL: api.3commas.io Enable "Webhook URL" checkbox Expiration: Open-ended Strategy Advantages ✅ Outperform Bitcoin: Designed specifically to beat BTC by timing alt rotations ✅ Capture Alt Seasons: Automatically accumulates when alts lag, sells when they pump ✅ Risk-Adjusted Sizing: Buys more when cheaper (better risk/reward) ✅ Emotional Discipline: Systematic approach removes fear and FOMO ✅ Multi-Asset: Run same strategy across multiple altcoins simultaneously ✅ Proven Indicators: Combines RSI, MACD, and MA deviation - battle-tested tools Backtesting Insights Optimal Timeframes: Daily chart: Best for backtesting and signal generation Weekly data is fetched internally regardless of display timeframe Historical Performance Characteristics: Accumulates heavily during bear markets and BTC dominance periods Captures explosive altcoin rallies when BTC stagnates Sequential selling preserves capital during extended downtrends Works best on established altcoins with multi-year history Risk Considerations: Requires capital reserves for extended accumulation periods Some altcoins may never recover if fundamentals deteriorate Past correlation patterns may not predict future performance Always size positions according to personal risk tolerance Visual Interface Indicator Panel Displays: Dynamic color line: Green→Lime→Yellow→Orange→Red as risk increases Horizontal threshold lines: Dashed lines mark your buy/sell levels Entry/Exit labels: Green labels for buys, Orange/Red/Maroon for sells Real-time risk value: Numerical display on price scale Customization: All threshold lines are adjustable via inputs Color scheme clearly differentiates buy zones (green spectrum) from sell zones (red spectrum) Line weights emphasize most extreme thresholds (L3 buy and L3 sell) Strategy Philosophy This strategy is built on the principle that altcoins move in cycles relative to Bitcoin. During Bitcoin rallies, alts often bleed against BTC (high sell, accumulate). When Bitcoin consolidates, alts pump (take profits). By measuring risk on the Alt/BTC chart instead of USD price, we time these rotations with precision. The 3-tier system ensures you're always averaging in at better prices and scaling out at better prices, maximizing your Bitcoin-denominated returns. Advanced Tips Multi-Bot Strategy: Run this on 5-10 different altcoins simultaneously to: Diversify correlation risk Capture whichever alt is pumping Smooth equity curve through rotation Pairing with BTC Strategy: Use alongside the BTC DCA Risk Strategy for complete portfolio coverage: BTC strategy for core holdings ALT strategies for alpha generation Rebalance between them based on BTC dominance Threshold Calibration: Check 2-3 years of historical data for your chosen alt Note where risk metric sat during major bottoms (set buy thresholds) Note where it peaked during euphoria (set sell thresholds) Adjust for your risk tolerance and holding period Credits Strategy Development & 3Commas Integration: Claude AI (Anthropic) Technical Analysis Framework: RSI, MACD, Moving Average theory Implementation: pommesUNDwurst Disclaimer This strategy is for educational purposes only. Cryptocurrency trading involves substantial risk of loss. Altcoins are especially volatile and many fail completely. The strategy assumes liquid markets and reliable Alt/BTC price data. Always do your own research, understand the fundamentals of any asset you trade, and never risk more than you can afford to lose. Past performance does not guarantee future results. The authors are not financial advisors and assume no liability for trading decisions. Additional Warning: Using leverage or trading illiquid altcoins amplifies risk significantly. This strategy is designed for spot trading of established cryptocurrencies with deep liquidity. Tags: Altcoin, Alt/BTC, DCA, Risk Metric, Dollar Cost Averaging, 3Commas, ETH, SOL, Crypto Rotation, Bitcoin Correlation, Automated Trading, Alt Season Feel free to modify any sections to better match your style or add specific backtesting results you've observed! 🚀Claude is AI and can make mistakes. Please double-check responses. Sonnet 4.5
Strategia Pine Script®
di nakphanan
Fractal MTF MA System Overview Unlock the fractal nature of the market with a single, clean indicator. This tool allows you to visualize the exact same Moving Average length (default: 50) across 5 different timeframes simultaneously. By comparing "apples to apples" across time dimensions, you get a clear, immediate view of the overall market trend and momentum health. No more switching charts or manually adding 5 different indicators. This script does it all with a single global setting. Key Features 🧩 Fractal Logic: Applies one consistent calculation (e.g., 50 Period) to 15m, 30m, 1H, 2H, and 4H timeframes. 🎛️ Global Control: Change the Length or MA Type once, and it instantly updates all 5 lines. No need to adjust each line individually. 🚀 3 Calculation Modes: Switch between DEMA (Double Exponential - Default/Fast), EMA (Standard), or SMA (Smooth) to fit your trading style. 🎨 Visual Clarity: Choose between Step mode (for precise MTF levels) or Line mode (for a smoother, cleaner look). How to Use This Indicator 1. Trend Following (The Fan) When the market is trending strongly, the lines will stack in perfect order: Bullish: Price > 15m > 30m > 1H > 2H > 4H. Bearish: Price < 15m < 30m < 1H < 2H < 4H. Strategy: Ride the trend as long as the "Fan" is open and orderly. 2. Mean Reversion (The Snap-Back) When the price moves too far from the anchor line (the 4H line) and the gaps between the lines become extreme, the market is "overextended" (like a stretched rubber band). Strategy: Watch for price to stall and cross back over the fastest line (15m) as an early sign of a correction towards the slower averages. 3. Dynamic Support & Resistance During a trend, price often pulls back to test the 1H or 2H lines before continuing. These lines act as dynamic support zones. Settings Global Length: Sets the lookback period for ALL lines (Default: 50). MA Type: Select DEMA, EMA, or SMA. Line Style: Toggle between Step (precise) or Line (smooth). Individual Toggles: You can hide specific timeframes via the settings menu if you want a cleaner chart. Enjoy the clean charts! Feedback and likes are appreciated. 🚀
Indicatore Pine Script®
di yosefco12
On Balance Volume [BrightSideTrading] # On Balance Volume - Complete User Guide ## Overview This enhanced OBV indicator provides clean, actionable volume analysis with intelligent signal filtering. It combines On-Balance Volume (OBV) with a smoothed signal line to identify shifts in buying and selling pressure without chart clutter. **Key Features:** - Real-time OBV and signal line visualization - Smart crossover detection with confirmation filtering - Z-Score momentum analysis - Customizable signal alerts with V-shaped markers - Window-normalized option for detrended analysis --- ## What is On-Balance Volume (OBV)? OBV is a volume-based momentum indicator that accumulates volume on up days and subtracts volume on down days. It answers a fundamental question: **Is volume flowing in (buying) or out (selling)?** **Formula:** - If Close > Previous Close: OBV = Previous OBV + Volume - If Close < Previous Close: OBV = Previous OBV - Volume - If Close = Previous Close: OBV = Previous OBV (unchanged) **What it tells you:** - **Rising OBV** = Accumulation (smart money buying) - **Falling OBV** = Distribution (smart money selling) - **OBV above zero line** = Net positive buying pressure - **OBV below zero line** = Net negative selling pressure --- ## Interface & Settings ### **MAIN VISUALIZATION** **OBV Line (Green/Red Ribbon)** - Green when OBV is above the signal line (bullish trend) - Red when OBV is below the signal line (bearish trend) - Toggles between window-normalized (detrended) and raw values **Signal Line (Orange)** - Smoothed average of OBV - Crossovers with OBV generate buy/sell signals - Default: 21-period SMA **V-Shaped Markers** - Green upward V = Bullish crossover (buy signal) - Red downward V = Bearish crossover (sell signal) - Appears at the OBV value when signal is triggered **Zero Line (Yellow)** - Center equilibrium point for volume balance - Acts as support/resistance for OBV - Separates buying pressure (above) from selling pressure (below) --- ### **SOURCE GROUP** **Source** - **Default:** Close - **Options:** Open, High, Low, or any custom value - Controls which price value triggers OBV direction changes - Most traders use Close for standard OBV calculation --- ### **SIGNAL SMOOTHING GROUP** **Show Signal?** - **Default:** ON - Toggle visibility of the signal line - Disable if you prefer to see raw OBV only **Smoothing Type** - **SMA (Simple Moving Average)** - Default, standard smoothing - **EMA (Exponential Moving Average)** - Faster response, weights recent bars more heavily - **Choose SMA** for consistent, traditional OBV signals - **Choose EMA** for faster trend identification (more whipsaws possible) **Smoothing Length** - **Default:** 21 bars - **Range:** 1-200 bars - **Lower values** (5-14): Faster signals, more noise - **Higher values** (30-50): Slower signals, fewer false alarms - **Recommendation:** Use 21-25 for most timeframes --- ### **SIGNAL FILTERING GROUP** This is your primary control for signal quality and frequency. **Show Signal Markers?** - **Default:** ON - Toggle the V-shaped buy/sell markers on/off - Disable if markers distract from your analysis **Signal Filter Type** - **None** - Shows every single crossover (noisy, best for skilled traders) - **Confirmation Bars** - Waits N bars before confirming signal (recommended) - **Strength-Based** - Only signals during strong momentum (filters weakest moves) #### **CONFIRMATION BARS MODE** (Recommended) Best for reducing false signals while staying responsive to real moves. **Confirmation Bars** - **Default:** 2 bars - **Range:** 1-10 bars - Waits for the signal to hold for N consecutive bars after crossover - **Setting 1:** Every crossover (same as "None") - **Setting 2:** Wait 1 bar confirmation (good balance) - **Setting 3:** Wait 2 bars confirmation (filters 50% of noise) - **Setting 4+:** Very selective, misses quick reversals **How it works:** 1. OBV crosses signal line → Confirmation counter starts 2. If OBV stays on correct side for 2 bars → V-marker appears 3. If OBV crosses back → Counter resets, no signal #### **STRENGTH-BASED MODE** Only signals when momentum is statistically significant. **Min Z-Score Strength** - **Default:** 0.3 - **Range:** 0.0-3.0 - Requires OBV deviation from its mean to reach this threshold - **Setting 0.1-0.3:** More signals, lower quality - **Setting 0.5-0.8:** Moderate signals, good quality - **Setting 1.0+:** Only the strongest momentum shifts **How it works:** - Calculates how far OBV is from its 50-bar average (Z-score) - Only shows signals when this distance is meaningful - Automatically avoids weak, choppy market conditions --- ### **VISUALS & COLORS GROUP** **Highlight Crossovers?** - **Default:** ON - Master toggle for all signal markers - Turn OFF to see only the OBV/signal lines **Apply Ribbon Filling?** - **Default:** ON - Colors the space between OBV and signal line - Green fill = OBV above signal (bullish) - Red fill = OBV below signal (bearish) - Provides clear visual trend confirmation - Turn OFF for minimal chart clutter --- ### **STATS & ZONES GROUP** **Use Window-Normalized OBV (visual only)?** - **Default:** ON - Removes long-term trend from OBV for clearer short-term signals - Detrends the indicator to highlight recent momentum changes - **ON:** Better for swing trading and identifying reversals - **OFF:** Better for trend-following strategies - Note: Z-Score always uses raw OBV for statistical accuracy **OBV Normalize Window** - **Default:** 200 bars - Lookback period for detrending calculation - Larger values = more aggressive detrending - Adjust if you want OBV to oscillate more/less around zero **Show Z-Score (OBV)?** - **Default:** ON - Displays statistical momentum indicator below main chart - Ranges from -3 to +3 (most data within -2 to +2) - High Z-Score = Strong buying momentum - Low Z-Score = Strong selling momentum **Z-Score Lookback** - **Default:** 50 bars - Period for calculating Z-Score mean and standard deviation - Larger = smoother Z-Score, slower response - Smaller = noisier Z-Score, faster response **Show ROC (OBV Momentum)?** - **Default:** OFF - Rate of Change indicator for OBV velocity - Useful for identifying momentum turning points - Enable if you want to see speed of volume changes **ROC Lookback** - **Default:** 14 bars - Period for ROC calculation **Show Z-Score StdDev Zones?** - **Default:** ON - Shaded regions around zero line showing statistical boundaries - Inner Zone (±1 Z) = Normal variation - Outer Zone (±2 Z) = Extreme moves, potential reversals - Helps identify overbought/oversold volume conditions **Inner Zone (±Z)** - **Default:** 1.0 - First boundary for standard deviation zones - Most normal trading occurs within ±1 **Outer Zone (±Z)** - **Default:** 2.0 - Second boundary for extreme conditions - Crossing these zones indicates significant momentum shift --- ## Trading Strategy Examples ### **Strategy 1: Signal Line Crossovers (Beginner)** **Setup:** - Signal Filter Type: **Confirmation Bars** - Confirmation Bars: **2-3** - Show Signal Markers: **ON** **Rules:** 1. **BUY signal** (green V): When OBV crosses above signal line and holds for 2-3 bars - Confirms buying pressure is building - Look for price to follow within 1-3 bars 2. **SELL signal** (red V): When OBV crosses below signal line and holds for 2-3 bars - Confirms selling pressure is increasing - Expect price decline 3. **Exit:** Take profits at next signal or use price support/resistance **Best For:** Swing trading, intraday reversals, timeframes 5m-1h --- ### **Strategy 2: Zero Line Bounce (Intermediate)** **Setup:** - Signal Filter Type: **Strength-Based** - Min Z-Score Strength: **0.5** - Show Z-Score StdDev Zones: **ON** **Rules:** 1. **Watch OBV approach zero line** during established trends - OBV bouncing repeatedly off zero = trend is healthy - OBV breaking through zero = trend reversal imminent 2. **Enter on bounce:** Buy when OBV bounces from zero line in uptrend 3. **Exit on break:** Close position when OBV breaks below zero line 4. **Confirm with Z-Score:** Only take trades when Z-Score shows momentum (|Z| > 0.5) **Best For:** Trend traders, identifying trend strength, medium timeframes 15m-4h --- ### **Strategy 3: Momentum Extremes (Advanced)** **Setup:** - Signal Filter Type: **None** - Show Z-Score StdDev Zones: **ON** - Outer Zone: **2.0** **Rules:** 1. **Identify extremes:** When Z-Score breaks outer zone (±2.0) - Indicator is in extreme territory - Likely overextended 2. **Fade extremes:** Take opposite position when Z-Score hits extreme - High Z (>2.0) = OBV overbought, expect pullback - Low Z (<-2.0) = OBV oversold, expect bounce 3. **Confirm:** Wait for crossover signal to enter 4. **Target:** Outer zone of opposite side or zero line **Best For:** Range trading, mean reversion, experienced traders only --- ## Reading the Indicator in Different Markets ### **Strong Uptrend** - OBV consistently above signal line (green) - OBV well above zero line, rising higher lows - Z-Score positive, trending upward - **Action:** Buy dips to signal line, sell at resistance ### **Strong Downtrend** - OBV consistently below signal line (red) - OBV well below zero line, making lower highs - Z-Score negative, trending downward - **Action:** Sell rallies to signal line, cover at support ### **Consolidation/Choppy Market** - OBV whipsaws around signal line frequently - Crossovers occur every few bars - Z-Score oscillating between -1 and +1 - **Action:** Increase confirmation bars to 3-4, or switch to strength-based filter ### **Accumulation (Bottom Formation)** - OBV rising while price is flat or falling - Volume flowing in despite downtrend (bullish divergence) - Z-Score climbing while price lows hold - **Action:** Expect breakout up; prepare buy near support ### **Distribution (Top Formation)** - OBV falling while price is flat or rising - Volume flowing out despite uptrend (bearish divergence) - Z-Score falling while price continues higher - **Action:** Expect breakdown down; prepare short near resistance --- ## Parameter Tuning Guide ### **Aggressive Settings (More Signals)** - Smoothing Length: 14 - Signal Filter: None or Confirmation Bars: 1 - Min Z-Score: 0.1 - Best for: Day trading, high volatility stocks - Risk: More false signals ### **Balanced Settings (Recommended)** - Smoothing Length: 21 - Signal Filter: Confirmation Bars: 2 - Min Z-Score: 0.3 - Best for: Swing trading, most market conditions - Risk/Reward: Moderate ### **Conservative Settings (Fewer Signals)** - Smoothing Length: 30-40 - Signal Filter: Confirmation Bars: 3-4 or Strength-Based: 0.7+ - Min Z-Score: 0.8 - Best for: Position trading, high-conviction trades only - Risk: May miss some moves --- ## Common Questions & Troubleshooting **Q: Why are there more sell signals than buy signals?** A: This reflects the actual market action. Markets often decline faster than they rise (fear > greed). Confirm signals with price action and support/resistance. **Q: The indicator keeps whipsawing, should I hide it?** A: Increase Confirmation Bars to 3-4 or switch to Strength-Based filter. Market conditions matter—choppy markets require stricter filters. **Q: What's the difference between normalized and raw OBV?** A: Normalized (detrended) shows shorter-term momentum by removing long-term trends. Raw OBV shows absolute accumulation/distribution over the full period. Use normalized for swing signals, raw for trend confirmation. **Q: My signals come too late. How do I get faster entry?** A: Reduce Smoothing Length (try 14 instead of 21), use EMA instead of SMA, or set Confirmation Bars to 1. Trade-off: More false signals. **Q: Can I use this for day trading?** A: Yes, on 1m-5m charts with aggressive settings. Use Confirmation Bars: 1 and focus on Z-Score > 0.5 entries only. **Q: Should I trade every signal?** A: No. Filter signals using: price near support/resistance, multiple indicators confirming, and Z-Score showing momentum. Best signals occur at key levels. --- ## Best Practices 1. **Always confirm with price action:** OBV signals work best when price is near support, resistance, or moving average. Don't trade signals in a vacuum. 2. **Use volume context:** Check if volume is increasing or decreasing on the signal. Strong signals have volume confirmation (increasing volume on OBV spikes). 3. **Adjust settings per timeframe:** - 1m-5m: Smoothing 12, Confirmation 1, Z-Score 0.2 - 15m-1h: Smoothing 20, Confirmation 2, Z-Score 0.3 - 4h-1d: Smoothing 25, Confirmation 3, Z-Score 0.5 4. **Watch the zero line:** It's your friend. OBV behavior at the zero line reveals trend strength. Bounces = healthy trend. Breaks = reversal. 5. **Risk management:** No indicator is perfect. Use proper position sizing and stop losses. OBV should confirm your thesis, not be the only reason to trade. 6. **Combine with other indicators:** - Price moving averages for trend confirmation - RSI or Stochastic for overbought/oversold levels - Support/resistance for entry/exit zones - MACD for momentum divergences --- ## Disclaimer This indicator is for educational and informational purposes only. It is not financial advice. Past performance does not guarantee future results. Always conduct your own research and consult with a financial advisor before making trading decisions. Trading carries risk, including potential loss of principal. --- ## Version History **Version 1.0** - Initial release with enhanced signal filtering, Z-Score analysis, and customizable parameters.
Indicatore Pine Script®
di bbosman129