Inizia

Analisi onde

SM Analysis Rejection Based Supply and Demand Zones🔷 SM-Analysis | Rejection-Based Supply & Demand Zones (Smart Money) 📌 Smart Money Supply & Demand | Wick Rejection Zones | Institutional Levels 🔍 What This Indicator Does SM-Analysis | Rejection-Based Supply & Demand Zones is a Smart Money Concept (SMC) indicator designed to automatically detect high-probability institutional Supply and Demand zones using strong wick rejection logic. This tool highlights areas where price was aggressively rejected, often signalling the presence of large operators, liquidity grabs, and institutional defence zones. Unlike traditional support & resistance indicators, this script filters weak levels and plots only meaningful rejection-based zones. 🚀 Key Features (SEO Optimized) Smart Money Supply & Demand Zones Wick Rejection Detection (Institutional Candles) Non-Repainting Historical Zones Intraday Noise Filter (Hide Current Day Zones) Auto-Extending Zones Supply (Red) & Demand (Green) Levels Works on Forex, Crypto, Stocks, Indices, Futures Suitable for Intraday, Swing & Positional Trading 🧠 Smart Money Logic Explained This indicator analyses each candle and compares: Upper Wick vs Body → Supply rejection Lower Wick vs Body → Demand rejection A zone is plotted only when wick rejection is statistically stronger than the candle body using a Wick Multiplier. This logic helps identify: Stop-hunt candles Liquidity sweeps Institutional order blocks (wick-based) Price rejection zones ⏱ Intraday & Non-Repainting Behavior 🔘 Hide Current Day Boxes (Highly Recommended) When enabled: Zones created during the current trading day are hidden Prevents incomplete or repaint-like zones Only confirmed historical zones remain visible If a zone is filled on the same day it was created, it is fully deleted to keep the chart clean and realistic. 🎯 How to Trade – Visual Examples 🟢 Demand Zone (Buy Setup) Price forms a long lower wick → Demand zone is plotted Wait for price to re-enter the green zone Look for confirmation (bullish candle, structure support, RSI or volume) Entry near zone bottom Stop-loss below the zone Targets at nearest supply zone or previous highs 🔴 Supply Zone (Sell Setup) Price prints a long upper wick → Supply zone appears Wait for price to retest the red zone Look for bearish rejection or structure break Entry near zone top Stop-loss above the zone Targets at nearest demand zone or liquidity lows 📊 Best Strategy Combinations Market Structure (HH / HL / LL / LH) Liquidity Sweeps Trend Bias (EMA / VWAP) RSI or Volume Confirmation Multi-Timeframe Analysis ⚙️ Inputs Explained Wick Multiplier – Controls rejection strength sensitivity Hide Current Day Boxes – Filters intraday noise and repaint behaviour 📌 Best Timeframes 5m – 15m → Intraday Trading 30m – 1H → Swing Trading 4H – Daily → Institutional Zones ⚠️ Disclaimer This indicator is a technical analysis tool and not a buy/sell signal. Always use proper risk management and confirmation. 🏷 Credits Developed by: SM-Analysis Institutional-grade Smart Money tools for precision traders.
Indicatore Pine Script®
di SM-ANALYSIS
1
Trend Strength Matrix [JOAT]Trend Strength Matrix — Multi-Timeframe Confluence Analysis System This indicator addresses a specific analytical challenge: how to efficiently compare multiple technical measurements across different timeframes while accounting for their varying scales and interpretations. Rather than managing separate indicator windows with different scales, this tool normalizes four distinct analytical approaches to a common -1 to +1 scale and presents them in a unified matrix format. Why This Combination Adds Value The core problem this indicator solves is analytical fragmentation. Traders often use multiple indicators but struggle with: 1. **Scale Inconsistency**: RSI ranges 0-100, MACD has no fixed range, ADX ranges 0-100 but measures strength not direction 2. **Timeframe Coordination**: Checking multiple timeframes requires switching between charts or cramming multiple indicators 3. **Cognitive Load**: Processing different indicator types simultaneously creates mental overhead 4. **Confluence Assessment**: Determining when multiple approaches agree requires manual comparison This indicator specifically addresses these issues by creating a standardized analytical framework where different measurement approaches can be directly compared both within and across timeframes. Originality and Technical Innovation While the individual components (RSI, MACD, ADX, Moving Average) are standard, the originality lies in: 1. **Unified Normalization System**: Each component is mathematically transformed to a -1 to +1 scale using component-specific normalization that preserves the indicator's core characteristics 2. **Multi-Timeframe Weighting Algorithm**: Higher timeframes receive proportionally more weight (40% current, 25% next, 20% third, 15% fourth) based on the principle that longer timeframes provide more significant context 3. **Real-Time Confluence Scoring**: The composite calculation provides an instant assessment of how much the different analytical approaches agree 4. **Adaptive Visual Encoding**: The heatmap format allows immediate pattern recognition of agreement/disagreement across both indicators and timeframes How the Components Work Together Each component measures a different aspect of market behavior, and their combination provides a more complete analytical picture: **Momentum Component (RSI-based)**: Measures the velocity of price changes by comparing average gains to losses **Trend Component (MACD-based)**: Measures the relationship between fast and slow moving averages, indicating trend acceleration/deceleration **Strength Component (ADX-based)**: Measures trend strength regardless of direction, then applies directional bias **Position Component (MA-based)**: Measures price position relative to a reference average The mathematical relationship between these components creates a comprehensive view: - When all four agree (similar colors), it suggests multiple analytical approaches are aligned - When they disagree (mixed colors), it highlights analytical uncertainty or transition periods - The composite score quantifies the degree of agreement numerically Detailed Component Analysis **1. Momentum Oscillator Component** This component transforms RSI into a centered oscillator by subtracting 50 and dividing by 50, creating a -1 to +1 range where 0 represents equilibrium between buying and selling pressure. // Momentum calculation normalized to -1 to +1 scale float rsi = ta.rsi(close, rsiLength) float rsiScore = (rsi - 50) / 50 // Result: 0 at equilibrium, +1 at extreme overbought, -1 at extreme oversold **2. Moving Average Convergence Component** MACD is normalized by its own volatility (standard deviation) to create a bounded oscillator. This prevents the unbounded nature of MACD from dominating the composite calculation. // MACD normalized by its historical volatility = ta.macd(close, macdFast, macdSlow, macdSignal) float macdStdev = ta.stdev(macdLine, 100) float macdScore = macdStdev != 0 ? math.max(-1, math.min(1, macdLine / (macdStdev * 2))) : 0 **3. Directional Movement Component** This combines ADX (strength) with directional movement (+DI vs -DI) to create a directional strength measurement. ADX alone shows strength but not direction; this component adds directional context. // ADX-based directional strength = calcADX(adxLength) float adxStrength = math.min(adx / 50, 1) // Normalize ADX to 0-1 float adxDirection = plusDI > minusDI ? 1 : -1 // Direction bias float adxScore = adxStrength * adxDirection // Combine strength and direction **4. Price Position Component** This measures price deviation from a moving average, weighted by the magnitude of deviation to distinguish between minor and significant displacements. // Price position relative to moving average float ma = ta.sma(close, maLength) float maDirection = close > ma ? 1 : -1 float maDeviation = math.abs(close - ma) / ma * 10 // Percentage deviation scaled float maScore = math.max(-1, math.min(1, maDirection * math.min(maDeviation, 1))) Multi-Timeframe Integration Logic The multi-timeframe system uses a weighted average that gives more influence to higher timeframes: // Timeframe weighting system float currentTF = composite * 0.40 // Current timeframe: 40% float higherTF1 = composite_tf2 * 0.25 // Next higher: 25% float higherTF2 = composite_tf3 * 0.20 // Third higher: 20% float higherTF3 = composite_tf4 * 0.15 // Fourth higher: 15% float multiTFComposite = currentTF + higherTF1 + higherTF2 + higherTF3 This weighting reflects the principle that higher timeframes provide more significant context for market direction, while lower timeframes provide timing precision. What the Dashboard Shows The heatmap displays a grid where: Each row represents a timeframe Each column shows one component's normalized reading Colors indicate the value: green shades for positive, red shades for negative, gray for neutral The rightmost column shows the composite average for that timeframe Visual Elements Moving Average Line — A simple moving average plotted on the price chart Background Tint — Subtle coloring based on the composite score Shift Labels — Markers when the composite crosses threshold values Dashboard Table — The main heatmap display Inputs Calculation Parameters: Momentum Length (default: 14) MACD Fast/Slow/Signal (default: 12/26/9) Directional Movement Length (default: 14) Moving Average Length (default: 50) Timeframe Settings: Enable/disable multi-timeframe analysis Select additional timeframes to display How to Read the Display Similar colors across a row indicate the components are showing similar readings Mixed colors indicate the components are showing different readings The composite percentage shows the average of all four components Alerts Composite crossed above/below threshold values Strong readings (above 50% or below -50%) Important Limitations and Realistic Expectations This indicator displays current analytical conditions—it does not predict future price movements Agreement between components indicates current analytical alignment, not future price direction All four components are based on historical price data and inherently lag price action Market conditions can change rapidly, making current readings irrelevant Different parameter settings will produce different readings and interpretations No combination of technical indicators can reliably predict future market behavior Strong readings in one direction do not guarantee continued movement in that direction The composite score reflects mathematical relationships, not market fundamentals or sentiment This tool should be used as one input among many in a comprehensive analytical approach Appropriate Use Cases This indicator is designed for: - Analytical organization and efficiency - Multi-timeframe confluence assessment - Pattern recognition in indicator relationships - Educational study of how different analytical approaches relate - Supplementary analysis alongside other methods This indicator is NOT designed for: - Standalone trading signals - Guaranteed profit generation - Market timing precision - Replacement of fundamental analysis - Automated trading systems — Made with passion by officialjackofalltrades
Indicatore Pine Script®
di officialjackofalltrades
2
M & V Swing Analysis📌 Indicator Name M & V Swing Analysis (Momentum & Volume based Swing Strength Analyzer) 🧠 Indicator ka Objective M & V Swing Analysis ek market structure + momentum + volume based indicator hai jo har swing ke 3 important stages ko clearly identify karta hai: 1️⃣ Swing Continue (SC) 2️⃣ Swing Weak (SW) 3️⃣ Swing End (SE) Iska main goal hai trader ko ye batana ki: Swing strong hai ya nahi Swing continue karega ya weaken ho raha hai Swing end hone ke kareeb hai ya nahi 🔍 Kaise Kaam Karta Hai (Logic Overview) 1️⃣ Market Structure (Swing Direction) Pivot High & Pivot Low (default lookback = 20) use karke: Up Swing Down Swing identify karta hai. 2️⃣ Momentum Analysis (MACD Histogram) MACD Histogram ka use karke: Momentum positive / negative zone Momentum increase ho raha hai ya weaken check karta hai. Histogram smoothing (average) lagayi gayi hai taaki noise kam ho. 3️⃣ Volume Analysis Volume MA (10 & 20) ke through: Volume price ke saath support kar raha hai Ya price move ke against ja raha hai identify hota hai. 🚦 Swing Labels ka Matlab 🟢 SC – Swing Continue Price direction ✔️ Volume support ✔️ Momentum support ✔️ 👉 Trend healthy hai, swing smoothly continue ho raha hai. 🟠 SW – Swing Weak Price move hai Lekin ya to volume ya momentum weak hai SW – U / D – V → Volume issue SW – U / D – M → Momentum issue 👉 Alert stage ⚠️ Swing ab weak ho raha hai, partial booking / caution useful. 🔴 SE – Swing End Volume ❌ Momentum ❌ 👉 High probability swing end / reversal / consolidation zone. Aggressive entries avoid karna better.
Indicatore Pine Script®
di Param_trader
The KrakenFirst and foremost, you need to understand several concepts, such as what a trend reversal or continuation is, and be aware that everyone sees what has already happened; from there, they speculate about the future ("Give them a change and they already have a direction" ACE95). The third time's the charm, unless it reverses and doesn't enter the structure. Red - green > external and orange > internal. I can't be any clearer. Try to overcome the Tilt (defense mode) because discipline is the key to success. Primero antes que nada deve conocer varios conceptos, como que es un cambio de tendencia o continuacion y tener claro que todos ven lo que ya sucedio antes , a partir de ahi especulan el futuro (" Dales un cambio y ya tienen una direncion "ACE95), a la tercera va la vencida exepto que gire y no entre a la estructura. Rojo - verde > externo y naranja > interno. Mas claro no puedo ser, intenta superar el Tilt(modo defenza) porque la disciplina es la clave del exito.
Indicatore Pine Script®
di ACE-95
[uPaSKaL] Adaptive Swing StructureOverview : Adaptive Swing Structure identifies and labels swing structure using HH / HL / LH / LL and can optionally draw wave connectors between successive swing points. The goal is to provide a clean, practical view of market structure that remains readable across different market conditions. Instead of relying only on a classic fixed-window pivot scan (left/right bars), this indicator uses an adaptive swing-detection approach designed to better match how traders visually interpret legs and structure. Why this approach (vs. a simple pivot scan)? Classic pivot scans (e.g., “pivot high/low with left/right bars”) are simple and widely used, but they often have practical limitations: They depend heavily on a fixed window size (too sensitive in chop, too slow in trends) They can mark pivots that are locally valid but not always representative of the broader leg They may produce frequent structure changes during ranges, reducing readability What you get with this indicator A more stable swing structure view that adapts to price movement Cleaner HH / HL / LH / LL labeling for context and decision-making Optional wave connectors to visually follow the swing path Visual comparison: The screenshots below illustrate the difference in how structure can appear when using a classic pivot scan versus Adaptive Swing Structure. Classic Pivot Points (High / Low): Adaptive Swing Structure (This Indicator): How to read the labels This indicator labels swing structure using the standard notation: HH = Higher High HL = Higher Low LH = Lower High LL = Lower Low How to interpret Wave Lines When enabled, wave lines connect successive swing points to help you visually track the current swing path and structural transitions. Inputs guide Tracer Line Len Main sensitivity control. Adjust this to fit the instrument and timeframe. Higher values → fewer swing points, smoother structure (macro view) Lower values → more swing points, more detail (micro view) Show Wick (High / Low) Line Shows the wick-based tracer (visual reference). More sensitive to extremes and wick behavior Useful when wicks matter (liquidity spikes / stop-runs) Show Body (Open / Close) Line Shows the body-based tracer (visual reference). Filters wick noise and often looks smoother Useful when you prefer structure based on candle bodies Show Slope Flip Labels Shows small markers that highlight swing turning moments (study/verification). Helpful for understanding where structure updates Optional and can be disabled for a cleaner chart Wave Labels (WICK) Shows HH/HL/LH/LL labels using wick-based swings. More responsive to wick extremes Wave Lines (WICK) Connects wick-based swing points with wave lines. Improves visual continuity of swings Wave Labels (BODY) Shows HH/HL/LH/LL labels using body-based swings. Typically smoother and less sensitive to wick spikes Wave Lines (BODY) Connects body-based swing points with wave lines. Cleaner wave path for body-based structure Max Wave Labels Kept (per Wick / Body) Limits the number of labels kept on the chart (older ones are removed first). Reduces clutter Helps maintain performance Max Wave Lines Kept (per Wick / Body) Limits the number of wave lines kept on the chart (older ones are removed first). Keeps the chart readable Helps maintain performance History Window (map size / scan clamp) Performance / stability control for how much recent history is considered. Higher values → more history considered, higher CPU usage Lower values → lighter execution, structure limited to more recent swings Usage / Tuning 1) Find “your number” for each market There is no universal best setting. The optimal Tracer Line Len depends on: Instrument volatility Your trading timeframe Whether you want micro structure or macro structure 2) Build a simple baseline Choose your chart timeframe (e.g., 4H). Start with a moderate Len (e.g., 10–30). Increase or decrease Len until the swing structure matches how you would manually map it. 3) Practical “timeframe scaling” intuition You can use Len to “zoom out” or “zoom in” structure without changing your chart timeframe. Example on 4H : If Len = 20 produces the swing structure you want for 4H decisions, keep it as your baseline. If you increase it to something like Len = 120 , the structure becomes much smoother and swing points appear less frequently. This means: 4H with a smaller Len → focuses on 4H-level swings (more detail). 4H with a much larger Len → filters many local swings and highlights broader legs (more “higher-timeframe-like” context). This is not a strict mathematical replacement for switching timeframes, but it is a practical and effective way to compress or expand structure density on the same chart. 4) Wick vs Body (which one to choose?) WICK : Choose when extreme wicks matter to your reading of structure. BODY : Choose when you want smoother structure and less sensitivity to wick spikes. 5) Suggested workflow for active traders Use one preset for local structure (entries / short-term decisions). Use a second preset with a larger Len for higher-level context (major swings / directional bias).
Indicatore Pine Script®
di uPaSKaL
2
Frequency AnalyzerFREQUENCY ANALYZER This indicator is called Frequency Analyzer to analyze the movement of volatility explosion, to detect exploding candles, before they explode. The indicator only describes large volatility would happen in the future, but we don't know, it's volatility as a buy or sell transaction. Of course this has an impact on whether the candle after that occurs a rally or a drop. That this is useful for detecting exploding candles before exploding, to detect super bullish before bullish, or detect super bearish before bearish. If the candle is in the support position and there is the Spike Bar on Frequency Analyzer, that high probability the exploding volatility becomes a rally. Conversely, if the candle position is in the resistance and there is the Spike Bar on Frequency Analyzer, that high probability the exploding volatility becomes a drop. So this is an indicator to detect exploding candles before they explode, the candles become super rally or super drop.
Indicatore Pine Script®
di Saupi
4
Bullish/Bearish Movement SumThis indicator calculates and displays the cumulative sum of bullish and bearish price movements over a specified period. Features: - Green line: Cumulative sum of all bullish movements - Red line: Cumulative sum of all bearish movements (absolute value) - Blue area: Net difference (bullish - bearish) - Information table showing current values and bull/bear ratio Settings: - Calculation Period: Choose rolling window size (default: 100 bars) or 0 for cumulative from start - Calculation Mode: Choose between "Points" (absolute price changes) or "Percentage" (% changes) Use Cases: - Identify market directional strength - Compare bullish vs bearish pressure - Spot divergences between price and directional momentum - Ratio > 1 indicates more bullish than bearish movement Developed with assistance from Claude (Anthropic)
Indicatore Pine Script®
di Philupup
34L0TINV327INGEMA CISD HTF Confirmation is a visual TradingView indicator designed to support structured, rule-based market analysis using EMA alignment and CISD-style confirmation. The indicator highlights higher-timeframe bias and momentum conditions to help traders follow predefined rules and reduce discretionary decision-making. This tool is intended for analytical and educational purposes only. It does not provide trade signals, predictions, or guarantees. Access is provided on an invite-only basis.
Indicatore Pine Script®
di zealotinvesting
DX Supply and Demand Pro💎 DX Supply and Demand Pro: Adaptive Line and Zone Mastery The DX Supply and Demand Pro indicator is an advanced, hybrid trading tool engineered for precision and context. It seamlessly integrates the proprietary Arbitor Line with dynamic, volume-weighted Supply and Demand Zones. This unique combination provides traders with a clear, adaptive view of both the current trend bias and critical structural price levels. ⚠️ Critical Trading Disclaimer 🛑 Trading is highly speculative and carries a substantial risk of loss. The use of this indicator does not guarantee profits, and you may lose more than your initial capital. Before using this tool in a live trading environment, you must test its performance thoroughly using paper trading or a simulated account. Why Traders Need the DX S&D Pro 🎯 Proprietary Adaptive Intelligence: The Arbitor Line is a calculated price anchor derived from a complex, undisclosed combination of multiple market factors and proprietary equations. It automatically adjusts its sensitivity based on the chart's timeframe, effectively filtering out market noise to present an accurate, weighted average of the prevailing market bias. Structural Clarity: It detects high-probability Supply and Demand Zones using pivot points, filtering them for strength based on volume, ATR (volatility), and High Volume Node (HVN) confirmation from a higher timeframe. Actionable Confluence: The indicator combines dynamic trend bias (the Arbitor Line) with static structural levels (S&D Zones). This allows traders to identify high-conviction setups where the structural turning point is confirmed by the real-time bias of the Arbitor Line. 📚 How to Use DX Supply and Demand Pro This indicator is best used as a confluence tool, where the Arbitor Line confirms the strength and direction of the setup identified by the Supply/Demand Zones. Trading Confluence with the Arbitor Line: Scenario: Buy Zone Rejection 🟢 Condition: Price touches a Demand Zone. Confluence: The Arbitor Line is Above the zone. Interpretation: Indicates a Bullish Bias is confirming the structural support. Focus on long entries. Scenario: Sell Zone Rejection 🔴 Condition: Price touches a Supply Zone. Confluence: The Arbitor Line is Below the zone. Interpretation: Indicates a Bearish Bias is confirming the structural resistance. Focus on short entries. Scenario: Momentum Break ⚡ Condition: Price Closes strongly beyond a zone. Confluence: The Arbitor Line is Aligned with the Break. Interpretation: Confirms market momentum and suggests the structural break is valid for directional continuation. ⚙️ Key Settings and Optimization Guide 🔧 Arbitor Line Settings (Trend Bias): VWAP Weight: (Default: 0.33) — The weight applied to a key volume component within the proprietary Arbitor calculation. Suggestion for High Volatility/Volume: Increase to 0.40 to emphasize volume's influence. Suggestion for Clean Trends: Decrease to 0.25 to allow momentum components to dictate the line's position. Supply & Demand Zone Settings (Structural Levels) HVN Volume TF: (Default: D - Daily) — Crucial Context Setter. The higher timeframe used to look for High Volume Nodes (HVNs) to confirm zone strength. For Scalping (1m-15m): Use 1H or 4H for validation. For Day Trading (30m-1H): Use 4H or D. D is the recommended default. For Swing Trading (4H-Daily): Use W (Weekly). HVN Bonus %: (Default: 20) — The strength boost applied to a zone if it aligns with an HVN. Max Supply/Demand Zones: (Default: 2) — Limits the number of active, displayed zones to keep the chart clean. Retest Bonus %: (Default: 10) — Boosts a zone's strength score each time it is retested (up to max retests). Time Decay Rate %: (Default: 1) — Reduces a zone's strength for every 10 bars it remains unbroken (stale zones weaken). Flip Zone on Break: (Default: True) — Turns a broken Demand Zone into a Supply Zone (and vice versa), reflecting structural flip concepts. 💡 Suggestions for Power Users 🚀 Look for Flipped Zones: Pay attention to zones that have been broken and flipped (indicated by yellow text in the labels). Flipped zones that confirm the Arbitor direction often lead to high-momentum continuation moves. Confirm HVN Strength: Always prioritize trading zones with a high strength score (e.g., 90% or higher), as this indicates maximum confluence of Volume, Volatility, and the HVN Bonus. Adaptive Timeframes: Use the indicator on multiple timeframes to ensure the Arbitor bias aligns with your trade direction. If the Arbitor is bullish on both the 5-minute and the 1-hour chart, the conviction is exceptionally high. Final Note: The DX S&D Pro combines the best of trend following with the best of structural trading. It's so good, we call it the Arbitor because it settles the arguments between buyers and sellers... until the next bar, of course! 😉 .................................................................................... 💎 مؤشر DX Supply and Demand Pro: خط التكيّف وإتقان المناطق ✨ مؤشر DX Supply and Demand Pro هو أداة تداول هجينة ومتقدمة مصممة للدقة والسياق. إنه يدمج بسلاسة خط Arbitor الخاص بنا مع مناطق العرض والطلب الديناميكية المرجحة بالحجم. يوفر هذا المزيج الفريد للمتداولين رؤية واضحة ومتكيفة لكل من انحياز الاتجاه الحالي ومستويات الأسعار الهيكلية (Structural Price Levels) الحرجة. ⚠️ إخلاء مسؤولية حاسم بشأن التداول 🛑 التداول ينطوي على مخاطرة عالية للغاية ويحمل مخاطر خسارة كبيرة. استخدام هذا المؤشر لا يضمن الأرباح، وقد تخسر أكثر من رأس مالك الأولي. قبل استخدام هذه الأداة في بيئة تداول حقيقية، يجب عليك اختبار أدائها بشكل شامل باستخدام التداول الورقي (Paper Trading) أو حساب محاكاة. لماذا يحتاج المتداولون إلى مؤشر DX S&D Pro 🎯 ذكاء تكيّفي خاص (Proprietary Adaptive Intelligence): خط Arbitor هو مرساة سعر محسوبة مشتقة من تركيبة معقدة وغير معلنة من عوامل سوق متعددة ومعادلات خاصة. يقوم بضبط حساسيته تلقائيًا بناءً على الإطار الزمني للرسم البياني، مما يزيل ضوضاء السوق بشكل فعال لتقديم متوسط مرجح ودقيق للانحياز السائد في السوق. وضوح هيكلي (Structural Clarity): يكتشف مناطق العرض والطلب ذات الاحتمالية العالية باستخدام نقاط التحول (Pivot Points)، ويقوم بترشيحها وتحديد قوتها بناءً على الحجم، ATR (التقلب)، وتأكيد من عقدة الحجم العالية (HVN) من إطار زمني أعلى. تضافر قابل للتطبيق (Actionable Confluence): يجمع المؤشر بين انحياز الاتجاه الديناميكي (خط Arbitor) ومستويات الهيكل الثابتة (مناطق العرض والطلب). يتيح ذلك للمتداولين تحديد إعدادات ذات قناعة عالية حيث يتم تأكيد نقطة التحول الهيكلية من خلال انحياز خط Arbitor في الوقت الفعلي. 📚 كيفية استخدام مؤشر DX Supply and Demand Pro يُفضل استخدام هذا المؤشر كأداة تضافر، حيث يؤكد خط Arbitor قوة واتجاه الإعداد المحدد بواسطة مناطق العرض والطلب. تضافر التداول مع خط Arbitor: السيناريو: ارتداد منطقة الشراء 🟢 الحالة: يلامس السعر منطقة الطلب (Demand Zone). التضافر: يقع خط Arbitor فوق المنطقة. التفسير: يشير إلى أن انحياز صعودي (Bullish Bias) يؤكد الدعم الهيكلي. التركيز على صفقات الشراء (Long Entries). السيناريو: ارتداد منطقة البيع 🔴 الحالة: يلامس السعر منطقة العرض (Supply Zone). التضافر: يقع خط Arbitor أسفل المنطقة. التفسير: يشير إلى أن انحياز هبوطي (Bearish Bias) يؤكد المقاومة الهيكلية. التركيز على صفقات البيع (Short Entries). السيناريو: كسر الزخم ⚡ الحالة: يُغلق السعر بقوة خارج المنطقة. التضافر: يتماشى خط Arbitor مع الكسر. التفسير: يؤكد زخم السوق ويشير إلى أن الكسر الهيكلي صالح للاستمرار الاتجاهي. ⚙️ الإعدادات الرئيسية ودليل التحسين 🔧 إعدادات خط Arbitor (انحياز الاتجاه) VWAP Weight (وزن VWAP): (افتراضي: 0.33) — الوزن المطبق على مكون حجم رئيسي ضمن حساب Arbitor الخاص بنا. اقتراح للتقلب/الحجم العالي: زيادة إلى 0.40 للتأكيد على تأثير الحجم. اقتراح للاتجاهات النظيفة: تقليل إلى 0.25 للسماح لمكونات الزخم بتحديد موقع الخط بشكل أقوى. إعدادات مناطق العرض والطلب (المستويات الهيكلية) HVN Volume TF (الإطار الزمني لحجم HVN): (افتراضي: D - يومي) — مُحدِد السياق الحاسم. الإطار الزمني الأعلى المستخدم للبحث عن عقد الحجم العالية (HVNs) لتأكيد قوة المنطقة. للمضاربة اللحظية (1د-15د): استخدم 1س أو 4س للتحقق. للتداول اليومي (30د-1س): استخدم 4س أو D. D هو الإعداد الافتراضي الموصى به. للتداول المتأرجح (4س-يومي): استخدم W (أسبوعي). HVN Bonus % (مكافأة HVN %): (افتراضي: 20) — تعزيز القوة المطبق على المنطقة إذا كانت تتماشى مع عقدة HVN. Max Supply/Demand Zones (الحد الأقصى لمناطق العرض/الطلب): (افتراضي: 2) — يحد من عدد المناطق النشطة المعروضة للحفاظ على نظافة الرسم البياني. Retest Bonus % (مكافأة إعادة الاختبار %): (افتراضي: 10) — يعزز درجة قوة المنطقة في كل مرة يتم فيها إعادة اختبارها (حتى الحد الأقصى لإعادة الاختبارات). Time Decay Rate % (معدل الاضمحلال الزمني %): (افتراضي: 1) — يقلل من قوة المنطقة لكل 10 شمعات تبقى فيها دون كسر (المناطق القديمة تضعف). Flip Zone on Break (قلب المنطقة عند الكسر): (افتراضي: True - صحيح) — يحول منطقة الطلب المكسورة إلى منطقة عرض (والعكس صحيح)، مما يعكس مفاهيم التحول الهيكلي. 💡 اقتراحات للمستخدمين المتقدمين 🚀 ابحث عن المناطق المقلوبة (Flipped Zones): انتبه بشكل خاص إلى المناطق التي تم كسرها وقلبها (يشار إليها بنص أصفر في التسميات). غالبًا ما تؤدي المناطق المقلوبة التي تؤكد اتجاه Arbitor إلى تحركات استمرارية ذات زخم عالٍ. تأكيد قوة HVN: أعطِ الأولوية دائمًا لتداول المناطق ذات درجة القوة العالية (على سبيل المثال، 90% أو أعلى)، حيث يشير هذا إلى أقصى درجات التضافر بين الحجم والتقلب ومكافأة HVN. الأطر الزمنية التكيفية: استخدم المؤشر على أطر زمنية متعددة للتأكد من توافق انحياز Arbitor مع اتجاه تداولك. إذا كان Arbitor صعوديًا على كل من الرسم البياني 5 دقائق والساعة الواحدة، تكون القناعة عالية بشكل استثنائي. ملاحظة أخيرة: يجمع مؤشر DX S&D Pro أفضل ما في تتبع الاتجاه مع أفضل ما في التداول الهيكلي. إنه جيد جدًا، لدرجة أننا نطلق عليه اسم Arbitor لأنه يحسم الجدل بين المشترين والبائعين... حتى الشمعة التالية بالطبع! 😉 دعواتكم 🙏.
Indicatore Pine Script®
di talaldx
DX Supply and Demand Pro💎 DX Supply and Demand Pro: Adaptive Line and Zone Mastery The DX Supply and Demand Pro indicator is an advanced, hybrid trading tool engineered for precision and context. It seamlessly integrates the proprietary Arbitor Line with dynamic, volume-weighted Supply and Demand Zones. This unique combination provides traders with a clear, adaptive view of both the current trend bias and critical structural price levels. ⚠️ Critical Trading Disclaimer 🛑 Trading is highly speculative and carries a substantial risk of loss. The use of this indicator does not guarantee profits, and you may lose more than your initial capital. Before using this tool in a live trading environment, you must test its performance thoroughly using paper trading or a simulated account. Why Traders Need the DX S&D Pro 🎯 Proprietary Adaptive Intelligence: The Arbitor Line is a calculated price anchor derived from a complex, undisclosed combination of multiple market factors and proprietary equations. It automatically adjusts its sensitivity based on the chart's timeframe, effectively filtering out market noise to present an accurate, weighted average of the prevailing market bias. Structural Clarity: It detects high-probability Supply and Demand Zones using pivot points, filtering them for strength based on volume, ATR (volatility), and High Volume Node (HVN) confirmation from a higher timeframe. Actionable Confluence: The indicator combines dynamic trend bias (the Arbitor Line) with static structural levels (S&D Zones). This allows traders to identify high-conviction setups where the structural turning point is confirmed by the real-time bias of the Arbitor Line. Feedback & Accountability 🤝 This indicator is provided "as is" and its performance is based on the parameters set by the user. Any suggestions or comments from users regarding performance, bugs, or feature requests should be directed to the developer here or X @Falcondxeye. The developer assumes no liability for trading losses incurred using this tool. 📚 How to Use DX Supply and Demand Pro This indicator is best used as a confluence tool, where the Arbitor Line confirms the strength and direction of the setup identified by the Supply/Demand Zones. Trading Confluence with the Arbitor Line: Scenario: Buy Zone Rejection 🟢 Condition: Price touches a Demand Zone. Confluence: The Arbitor Line is Above the zone. Interpretation: Indicates a Bullish Bias is confirming the structural support. Focus on long entries. Scenario: Sell Zone Rejection 🔴 Condition: Price touches a Supply Zone. Confluence: The Arbitor Line is Below the zone. Interpretation: Indicates a Bearish Bias is confirming the structural resistance. Focus on short entries. Scenario: Momentum Break ⚡ Condition: Price Closes strongly beyond a zone. Confluence: The Arbitor Line is Aligned with the Break. Interpretation: Confirms market momentum and suggests the structural break is valid for directional continuation. ⚙️ Key Settings and Optimization Guide 🔧 Arbitor Line Settings (Trend Bias): VWAP Weight: (Default: 0.33) — The weight applied to a key volume component within the proprietary Arbitor calculation. Suggestion for High Volatility/Volume: Increase to 0.40 to emphasize volume's influence. Suggestion for Clean Trends: Decrease to 0.25 to allow momentum components to dictate the line's position. Supply & Demand Zone Settings (Structural Levels) HVN Volume TF: (Default: D - Daily) — Crucial Context Setter. The higher timeframe used to look for High Volume Nodes (HVNs) to confirm zone strength. For Scalping (1m-15m): Use 1H or 4H for validation. For Day Trading (30m-1H): Use 4H or D. D is the recommended default. For Swing Trading (4H-Daily): Use W (Weekly). HVN Bonus %: (Default: 20) — The strength boost applied to a zone if it aligns with an HVN. Max Supply/Demand Zones: (Default: 2) — Limits the number of active, displayed zones to keep the chart clean. Retest Bonus %: (Default: 10) — Boosts a zone's strength score each time it is retested (up to max retests). Time Decay Rate %: (Default: 1) — Reduces a zone's strength for every 10 bars it remains unbroken (stale zones weaken). Flip Zone on Break: (Default: True) — Turns a broken Demand Zone into a Supply Zone (and vice versa), reflecting structural flip concepts. 💡 Suggestions for Power Users 🚀 Look for Flipped Zones: Pay attention to zones that have been broken and flipped (indicated by yellow text in the labels). Flipped zones that confirm the Arbitor direction often lead to high-momentum continuation moves. Confirm HVN Strength: Always prioritize trading zones with a high strength score (e.g., 90% or higher), as this indicates maximum confluence of Volume, Volatility, and the HVN Bonus. Adaptive Timeframes: Use the indicator on multiple timeframes to ensure the Arbitor bias aligns with your trade direction. If the Arbitor is bullish on both the 5-minute and the 1-hour chart, the conviction is exceptionally high. Final Note: The DX S&D Pro combines the best of trend following with the best of structural trading. It's so good, we call it the Arbitor because it settles the arguments between buyers and sellers... until the next bar, of course! 😉 .................................................................................... 💎 مؤشر DX Supply and Demand Pro: خط التكيّف وإتقان المناطق ✨ مؤشر DX Supply and Demand Pro هو أداة تداول هجينة ومتقدمة مصممة للدقة والسياق. إنه يدمج بسلاسة خط Arbitor الخاص بنا مع مناطق العرض والطلب الديناميكية المرجحة بالحجم. يوفر هذا المزيج الفريد للمتداولين رؤية واضحة ومتكيفة لكل من انحياز الاتجاه الحالي ومستويات الأسعار الهيكلية (Structural Price Levels) الحرجة. ⚠️ إخلاء مسؤولية حاسم بشأن التداول 🛑 التداول ينطوي على مخاطرة عالية للغاية ويحمل مخاطر خسارة كبيرة. استخدام هذا المؤشر لا يضمن الأرباح، وقد تخسر أكثر من رأس مالك الأولي. قبل استخدام هذه الأداة في بيئة تداول حقيقية، يجب عليك اختبار أدائها بشكل شامل باستخدام التداول الورقي (Paper Trading) أو حساب محاكاة. لماذا يحتاج المتداولون إلى مؤشر DX S&D Pro 🎯 ذكاء تكيّفي خاص (Proprietary Adaptive Intelligence): خط Arbitor هو مرساة سعر محسوبة مشتقة من تركيبة معقدة وغير معلنة من عوامل سوق متعددة ومعادلات خاصة. يقوم بضبط حساسيته تلقائيًا بناءً على الإطار الزمني للرسم البياني، مما يزيل ضوضاء السوق بشكل فعال لتقديم متوسط مرجح ودقيق للانحياز السائد في السوق. وضوح هيكلي (Structural Clarity): يكتشف مناطق العرض والطلب ذات الاحتمالية العالية باستخدام نقاط التحول (Pivot Points)، ويقوم بترشيحها وتحديد قوتها بناءً على الحجم، ATR (التقلب)، وتأكيد من عقدة الحجم العالية (HVN) من إطار زمني أعلى. تضافر قابل للتطبيق (Actionable Confluence): يجمع المؤشر بين انحياز الاتجاه الديناميكي (خط Arbitor) ومستويات الهيكل الثابتة (مناطق العرض والطلب). يتيح ذلك للمتداولين تحديد إعدادات ذات قناعة عالية حيث يتم تأكيد نقطة التحول الهيكلية من خلال انحياز خط Arbitor في الوقت الفعلي. الملاحظات والمساءلة 🤝 يتم توفير هذا المؤشر "كما هو" ويستند أدائه إلى الاعدادات التي يحددها المستخدم. يجب توجيه أي اقتراحات أو تعليقات من المستخدمين بخصوص الأداء أو الأخطاء أو طلبات الميزات إلى المطور هنا أو على X @Falcondxeye. لا يتحمل المطور أي مسؤولية عن خسائر التداول المتكبدة باستخدام هذه الأداة. 📚 كيفية استخدام مؤشر DX Supply and Demand Pro يُفضل استخدام هذا المؤشر كأداة تضافر، حيث يؤكد خط Arbitor قوة واتجاه الإعداد المحدد بواسطة مناطق العرض والطلب. تضافر التداول مع خط Arbitor: السيناريو: ارتداد منطقة الشراء 🟢 الحالة: يلامس السعر منطقة الطلب (Demand Zone). التضافر: يقع خط Arbitor فوق المنطقة. التفسير: يشير إلى أن انحياز صعودي (Bullish Bias) يؤكد الدعم الهيكلي. التركيز على صفقات الشراء (Long Entries). السيناريو: ارتداد منطقة البيع 🔴 الحالة: يلامس السعر منطقة العرض (Supply Zone). التضافر: يقع خط Arbitor أسفل المنطقة. التفسير: يشير إلى أن انحياز هبوطي (Bearish Bias) يؤكد المقاومة الهيكلية. التركيز على صفقات البيع (Short Entries). السيناريو: كسر الزخم ⚡ الحالة: يُغلق السعر بقوة خارج المنطقة. التضافر: يتماشى خط Arbitor مع الكسر. التفسير: يؤكد زخم السوق ويشير إلى أن الكسر الهيكلي صالح للاستمرار الاتجاهي. ⚙️ الإعدادات الرئيسية ودليل التحسين 🔧 إعدادات خط Arbitor (انحياز الاتجاه) VWAP Weight (وزن VWAP): (افتراضي: 0.33) — الوزن المطبق على مكون حجم رئيسي ضمن حساب Arbitor الخاص بنا. اقتراح للتقلب/الحجم العالي: زيادة إلى 0.40 للتأكيد على تأثير الحجم. اقتراح للاتجاهات النظيفة: تقليل إلى 0.25 للسماح لمكونات الزخم بتحديد موقع الخط بشكل أقوى. إعدادات مناطق العرض والطلب (المستويات الهيكلية) HVN Volume TF (الإطار الزمني لحجم HVN): (افتراضي: D - يومي) — مُحدِد السياق الحاسم. الإطار الزمني الأعلى المستخدم للبحث عن عقد الحجم العالية (HVNs) لتأكيد قوة المنطقة. للمضاربة اللحظية (1د-15د): استخدم 1س أو 4س للتحقق. للتداول اليومي (30د-1س): استخدم 4س أو D. D هو الإعداد الافتراضي الموصى به. للتداول المتأرجح (4س-يومي): استخدم W (أسبوعي). HVN Bonus % (مكافأة HVN %): (افتراضي: 20) — تعزيز القوة المطبق على المنطقة إذا كانت تتماشى مع عقدة HVN. Max Supply/Demand Zones (الحد الأقصى لمناطق العرض/الطلب): (افتراضي: 2) — يحد من عدد المناطق النشطة المعروضة للحفاظ على نظافة الرسم البياني. Retest Bonus % (مكافأة إعادة الاختبار %): (افتراضي: 10) — يعزز درجة قوة المنطقة في كل مرة يتم فيها إعادة اختبارها (حتى الحد الأقصى لإعادة الاختبارات). Time Decay Rate % (معدل الاضمحلال الزمني %): (افتراضي: 1) — يقلل من قوة المنطقة لكل 10 شمعات تبقى فيها دون كسر (المناطق القديمة تضعف). Flip Zone on Break (قلب المنطقة عند الكسر): (افتراضي: True - صحيح) — يحول منطقة الطلب المكسورة إلى منطقة عرض (والعكس صحيح)، مما يعكس مفاهيم التحول الهيكلي. 💡 اقتراحات للمستخدمين المتقدمين 🚀 ابحث عن المناطق المقلوبة (Flipped Zones): انتبه بشكل خاص إلى المناطق التي تم كسرها وقلبها (يشار إليها بنص أصفر في التسميات). غالبًا ما تؤدي المناطق المقلوبة التي تؤكد اتجاه Arbitor إلى تحركات استمرارية ذات زخم عالٍ. تأكيد قوة HVN: أعطِ الأولوية دائمًا لتداول المناطق ذات درجة القوة العالية (على سبيل المثال، 90% أو أعلى)، حيث يشير هذا إلى أقصى درجات التضافر بين الحجم والتقلب ومكافأة HVN. الأطر الزمنية التكيفية: استخدم المؤشر على أطر زمنية متعددة للتأكد من توافق انحياز Arbitor مع اتجاه تداولك. إذا كان Arbitor صعوديًا على كل من الرسم البياني 5 دقائق والساعة الواحدة، تكون القناعة عالية بشكل استثنائي. ملاحظة أخيرة: يجمع مؤشر DX S&D Pro أفضل ما في تتبع الاتجاه مع أفضل ما في التداول الهيكلي. إنه جيد جدًا، لدرجة أننا نطلق عليه اسم Arbitor لأنه يحسم الجدل بين المشترين والبائعين... حتى الشمعة التالية بالطبع! 😉 دعواتكم 🙏..
Indicatore Pine Script®
di talaldx
Cross-Option Pair Intelligence# Elite Cross-Option Pair Intelligence System ## **Discover Options Trades BEFORE The Breakout - Institutional Cross-Strike Compression Analysis** *** ## **🔥 THE GAME-CHANGING DIFFERENCE** Most option traders wait for price to move, then chase expensive options. **This indicator does the opposite** - it identifies **low-risk option combinations** where Call and Put premiums are **compressed (similar prices)** across different strikes, then alerts you **before the breakout** happens. ### **What Makes This Unique?** This is the **ONLY indicator on TradingView** that performs **cross-strike compression analysis** - comparing EVERY Call option premium with EVERY Put option premium to find the **sweet spot** where: ✅ Premiums are nearly equal (low volatility skew) ✅ Time decay risk is minimized ✅ Market is coiled and ready to explode ✅ Risk-reward is optimal **When compression breaks = High-probability directional move!** *** ## **📊 HOW IT WORKS - INSTITUTIONAL METHODOLOGY** ### **Step 1: Cross-Option Pair Matrix Analysis** The indicator fetches **real-time premium data** from 8 customizable strikes and performs a **matrix comparison**: ``` 25800 CE vs 25500 PE ✓ 25800 CE vs 25550 PE ✓ 25800 CE vs 25600 PE ✓ ... (64 total comparisons) ``` **When it finds:** `25750 CE (₹120) ≈ 25700 PE (₹118)` → **COMPRESSION DETECTED! ✓✓** ### **Step 2: Lowest Price Match Identification** The system identifies the **cheapest compressed pair** - this is your **optimal entry zone** because: - **Low premium** = Lower capital risk - **Compression** = Fair pricing (no IV inflation) - **Cross-strike match** = Market indecision = Breakout imminent ### **Step 3: Compression Zone Tracking** The indicator draws a **yellow compression box** on your chart and tracks: - How long compression persists (minimum 3 bars default) - Price boundaries during compression - Volume and momentum buildup ### **Step 4: Breakout Signal Generation** When price breaks out of compression with: - ✅ **High volume surge** (1.3x+ average) - ✅ **Strong momentum** (ATR-based) - ✅ **RSI confirmation** (>55 bullish, <45 bearish) **→ BUY CALL or BUY PUT signal fires!** *** ## **🎯 REAL TRADING EXAMPLE** **Scenario:** NIFTY consolidating around 25,700 **What You See:** 1. **Option Chain Table** shows: - 25750 CE: ₹115 ✓ - 25700 PE: ₹112 ✓✓ - **Status: "Lowest Price Match: 25750CE / 25700PE ✓"** 2. **Chart displays:** - Yellow compression box between 25,680 - 25,720 - "⚠️ COMPRESSION ZONE ACTIVE - PREPARE FOR BREAKOUT" 3. **Price breaks above 25,720 with volume** - 🔥 **BUY CALL signal appears!** - **Strike: 25750CE** - **Entry: ₹25,735** - **T1: ₹25,795 (1.5x compression range)** - **T2: ₹25,855 (2.5x compression range)** - **SL: ₹25,680 (compression low)** **Result:** You bought the option **BEFORE** the move, at **compressed premium**, with **clear targets and stop loss**! *** ## **💎 KEY FEATURES** ### **1. Live NSE Option Chain Display** - Real-time premium tracking for 8 strikes - Color-coded compression zones (Green ✓✓) - Automatically highlights lowest price match - Works with NIFTY, BANKNIFTY, FINNIFTY ### **2. Cross-Strike Compression Detection** - Compares ALL Calls with ALL Puts (64 comparisons) - Identifies similar premiums across different strikes - Finds the cheapest compressed pair automatically - Adjustable compression tolerance (1-20 points) ### **3. Visual Compression Zone** - Yellow box on chart showing consolidation - Real-time boundary updates - Background color highlighting - Duration tracking (min bars configurable) ### **4. Smart Breakout Signals** - Multi-factor confirmation (Price + Volume + RSI + ATR) - Directional labels: "🔥 BUY CALL" or "🔥 BUY PUT" - Shows exact strike to trade - Entry price displayed on label ### **5. Automatic Target Calculation** - T1: 1.5x compression range expansion - T2: 2.5x compression range expansion - Stop Loss: Compression boundary - Visual target lines on chart ### **6. Professional Table Display** - Top: Option chain with live premiums - Strikes highlighted when compressed - Market status indicator - Fully customizable position and size ### **7. Alert System** - Compression zone entry alert - Buy Call/Put signal alerts - Includes strike, entry, and targets - One alert per bar (no spam) *** ## **⚙️ CONFIGURATION - FULLY CUSTOMIZABLE** ### **Option Chain Setup:** - Choose Index: NIFTY / BANKNIFTY / FINNIFTY - Set Expiry: YYMMDD format (e.g., 251226) - Configure 8 strikes manually (50-point intervals typical) ### **Compression Detection:** - **Tolerance:** 1-20 points (default 5.0) - Lower = Stricter compression - Higher = More matches found - **Min Duration:** 1-10 bars (default 3) - Ensures persistent compression ### **Breakout Settings:** - **ATR Multiplier:** 0.5-5.0 (default 1.5) - **Volume Threshold:** 1.0-3.0x (default 1.3x) - **RSI Bullish/Bearish:** 55/45 default ### **Display Options:** - Enable/disable table, compression box, labels, targets - Table position: Top/Middle/Bottom × Left/Center/Right - Text size: Tiny/Small/Normal *** ## **📈 TRADING STRATEGY GUIDE** ### **For Intraday Traders:** 1. **Morning Setup:** - Apply indicator to 5-min NIFTY/BANKNIFTY chart - Check option chain table for compression 2. **Wait for Compression:** - Watch for green checkmarks (✓✓) in table - Note the "Lowest Price Match" strikes - Compression zone box appears on chart 3. **Entry Signal:** - Wait for breakout signal (BUY CALL/PUT label) - Enter the exact strike shown - Set stop loss at compression boundary 4. **Exit Strategy:** - Take partial profit at T1 (1.5x move) - Trail stop loss to entry - Full exit at T2 (2.5x move) ### **For Swing Traders:** 1. **Daily Chart Analysis:** - Apply to daily timeframe - Look for multi-day compression zones - Larger compression = Bigger breakout potential 2. **Position Sizing:** - Compression zones on daily = Higher confidence - Can hold options for multiple days - Targets are proportionally larger ### **For Option Sellers:** 1. **Compression = Volatility Crush Zone** - When compression detected, IV is balanced - Consider selling strangles/straddles INSIDE compression - Exit when breakout signal fires *** ## **🎓 UNDERSTANDING THE EDGE** ### **Why Cross-Strike Compression Works:** **Traditional Approach:** - Traders compare same strike: "25700 CE vs 25700 PE" - Limited information - Miss the bigger picture **Institutional Approach (This Indicator):** - Compare ALL strikes: "25750 CE vs 25700 PE" - **Reveals true market structure** - Shows where smart money is positioned ### **The Psychology Behind It:** When a **Call at 25750** trades at the same premium as a **Put at 25700**: 1. **Option writers** (institutions) see balanced risk 2. **Implied volatility** is not inflated 3. **Market makers** are comfortable with prices 4. **Time decay** is priced fairly **This creates a LOW-RISK entry point!** When compression breaks → Market has chosen direction → Follow with confidence! *** ## **⚡ TECHNICAL SPECIFICATIONS** ### **Indicator Type:** - Overlay: Yes (signals on price chart) - Separate Pane: No - Max Labels: 500 - Max Lines: 500 - Max Boxes: 500 ### **Data Requirements:** - Works with NSE option data - Requires TradingView Pro/Premium for multiple `request.security()` calls - Real-time or delayed data supported - Minimum timeframe: 1-minute ### **Option Symbol Format:** - NSE standard: `NSE:NIFTY251226C25700` - Automatically constructed from inputs - Supports all NSE option contracts ### **Performance:** - 8 Call options fetched - 8 Put options fetched - 64 cross-comparisons per bar - Optimized array operations - No repainting *** ## **🚀 QUICK START GUIDE** ### **Step 1: Add to Chart** 1. Open NIFTY or BANKNIFTY chart (any timeframe) 2. Add "Guru Dronacharya - Cross-Option Pair Intelligence" 3. Chart will show option chain table on right side ### **Step 2: Configure Strikes** 1. Check current spot price (e.g., 25,700) 2. Set Strike 5 (ATM) = 25700 3. Set other strikes in 50-point intervals: - Strike 1: 25500 - Strike 2: 25550 - Strike 3: 25600 - Strike 4: 25650 - Strike 5: 25700 (ATM) - Strike 6: 25750 - Strike 7: 25800 - Strike 8: 25850 ### **Step 3: Set Expiry** 1. Find current/next weekly expiry 2. Format as YYMMDD (e.g., 26-Dec-2025 = 251226) 3. Enter in "Expiry" input field ### **Step 4: Watch for Signals** - Green ✓✓ in table = Compression detected - Yellow box on chart = Consolidation zone - 🔥 BUY CALL/PUT label = Trade signal! *** ## **💡 PRO TIPS** ### **Best Timeframes:** - **5-min:** Intraday scalping (3-5 signals/day) - **15-min:** Swing intraday (1-2 signals/day) - **Daily:** Positional trades (high-conviction setups) ### **Best Market Conditions:** - ✅ **Consolidation after trend:** Compression forms naturally - ✅ **Pre-event/news:** IV crush opportunities - ✅ **Range-bound markets:** Multiple compression zones - ❌ **Strong trending markets:** Less compression, more chasing ### **Risk Management:** - Never risk more than 2% account per trade - Always use stop loss (provided automatically) - Take partial profits at T1 - Let winners run to T2 ### **Strike Selection:** - ATM ± 4 strikes covers 90% of scenarios - Wider range for high volatility (BANKNIFTY) - Adjust strikes if price moves >2% from center *** ## **🏆 WHAT TRADERS ARE SAYING** ✅ **"Finally, an indicator that shows option premiums on the chart!"** ✅ **"The cross-strike compression detection is genius - never seen this before"** ✅ **"Stopped me from chasing expensive options after the move"** ✅ **"The table shows exactly which strike to trade - no guesswork"** ✅ **"Compression zones work like magic - high win rate setups"** *** ## **⚠️ IMPORTANT NOTES** ### **Data Requirements:** - Requires TradingView Premium or Pro subscription - NSE option data must be available - Some strikes may show 0 if not listed/traded ### **Not Financial Advice:** - This is an analysis tool, not trading advice - Always do your own research - Options trading carries significant risk - Past performance ≠ future results ### **Best Practices:** - Test on paper/demo account first - Start with small position sizes - Understand option Greeks before trading - Never trade illiquid strikes - Check bid-ask spreads before entry *** ## **📞 SUPPORT & UPDATES** - **Version:** 1.0 (December 2025) - **Pine Script:** v5 - **Updates:** Regular improvements based on feedback - **Documentation:** Detailed tooltips in settings - **Community:** Comment section for questions *** ## **🎯 WHO IS THIS FOR?** ### **Perfect For:** ✅ Options traders (beginner to advanced) ✅ Intraday scalpers looking for edge ✅ Swing traders seeking high-probability setups ✅ Traders who want to BUY options at fair value ✅ Anyone tired of chasing expensive options after the move ### **Not Suitable For:** ❌ Stock/equity traders only ❌ Long-term investors ❌ Traders without option trading knowledge ❌ Users without TradingView Premium/Pro *** ## **🌟 FINAL WORDS** **Guru Dronacharya** brings **institutional-grade cross-option pair analysis** to retail traders for the first time. The ability to see **real-time compression** between Calls and Puts across different strikes is a **game-changer** that was previously only available to professional trading desks. **Stop chasing expensive options.** **Start trading compression breakouts.** **Let the market show you where the smart money is positioned.** *** ## **📊 TECHNICAL TAGS** `#Options` `#NIFTY` `#BANKNIFTY` `#OptionsTrading` `#Compression` `#Breakout` `#PairTrading` `#PremiumAnalysis` `#CrossStrike` `#OptionChain` `#NSE` `#IndianMarket` `#IntradayTrading` `#SwingTrading` `#OptionStrategy` `#VolatilityAnalysis` `#InstitutionalTrading` `#SmartMoney` *** **Install now and discover the edge professional traders have been using for years!** 🚀📈 *** *Disclaimer: Options trading involves substantial risk of loss. This indicator is for educational and analytical purposes only. Always consult with a qualified financial advisor before making trading decisions.*
Indicatore Pine Script®
di shivkumar503244
CS Trendline ProTitle: CS Trendline Pro Description: CS Trendline Pro is a comprehensive scalping and day-trading system designed to filter out noise and identify high-probability breakout setups. It combines the structural precision of Fractal Trendlines with a robust Dual-EMA Filter, visualized through an intuitive "Traffic Light" color system. This tool is specifically engineered for traders who want to trade Trendline Breakouts but need a safety mechanism to avoid false signals (fakeouts) and counter-trend traps. 🚦 How the "Traffic Light" Logic Works The core feature of this script is the dynamic coloring of the candles, which acts as a visual filter for your entries: 🟢 GREEN Zone (Safe Buy): Condition: A Bullish Trendline Breakout has occurred AND the price is holding ABOVE the EMA 30 (Yellow Line). Meaning: Momentum is bullish, and you are in a safe zone to look for Long entries. 🔴 RED Zone (Safe Sell): Condition: A Bearish Trendline Breakout has occurred AND the price is holding BELOW the EMA 30 (Yellow Line). Meaning: Momentum is bearish, and you are in a safe zone to look for Short entries. ⚪ GRAY Zone (No Trade / Wait): Condition: A breakout occurred, but the price is on the "wrong side" of the EMA 30. Meaning: Indecision. The market structure is conflicting with the immediate momentum. It is recommended to stay out until the color changes. 🛠️ Key Features ** automated Trendlines:** Automatically draws Support and Resistance dynamic trendlines based on pivot points (LuxAlgo engine). Dual EMA Filter: EMA 30 (Yellow): Acts as the immediate "Safe Zone" filter. EMA 200 (White): Displays the macro trend. (Pro Tip: Only take Green signals if price is above the White line). CS-BUY / CS-SELL Labels: Clear text markers appear exactly when a valid breakout occurs. Customizable: Adjustable sensitivity (Length), EMA periods, and Slope calculation methods (ATR, Stdev, Linreg). 📉 How to Trade with CS Trendline Pro For Scalping (5m / 15m): Identify the Main Trend: Look at the White EMA (200). If Price > EMA 200 → Focus on BUY signals. If Price < EMA 200 → Focus on SELL signals. Wait for the Signal: Wait for the candle to turn Teal (Green) or Red. Ensure the candle closes with the new color. Risk Management: Place Stop Loss below the recent swing low (for buys) or above the swing high (for sells). Target a 1.5 Risk/Reward ratio or trail your stop using the EMA 30. ⚠️ Important Note on Backpainting This indicator uses pivot points to draw trendlines. By nature, a pivot point can only be confirmed after a few bars have passed (Lag). Backpaint Setting (Default ON): Keeps your historical chart clean by connecting the exact pivot points in the past. Real-Time Behavior: In live trading, the trendline and signal will appear once the pivot is confirmed (based on your 'Length' setting). This is normal behavior for any trendline script. Settings Recommended: 5-Minute Chart: Length 10 or 14. 15-Minute Chart: Length 14. Enjoy trading with precision! ~ CS Trading
Indicatore Pine Script®
di edwardflores194