Inside 4+ Candles Box (Entry + Target + SMA Stop Logic)🔍 What This Script Does
This indicator detects price compression areas using 4 or more consecutive inside candles, then draws a breakout box to visually highlight the range.
Once price closes above the box, a long entry marker is plotted, along with:
🎯 Target line at 1x box size above the breakout.
❌ Stop-loss at the box low or at a dynamic SMA-based level if the box is too large.
🧠 Why It’s Unique
This script combines inside bar compression, breakout logic, risk control, and visual clarity — all in one tool.
It also cancels the setup entirely if price closes below the box low before breakout, avoiding late or false entries.
⚙️ Customizable Settings
Minimum inside candles (default = 4)
SMA length (used as stop if box is large)
Box size % threshold to activate smart stop
Entry, Target, and Stop marker colors
📌 Notes
For long setups only (no short signals).
Use on any asset or timeframe (ideal on 4H/1D).
This is not financial advice. Use with proper risk management.
Backtest thoroughly before live use.
Built with ❤️ by using Pine Script v6.
🇸🇦 وصف مختصر باللغة العربية:
هذا المؤشر يكتشف مناطق تماسك السعر من خلال 4 شموع داخلية أو أكثر، ثم يرسم مربعًا يحدد منطقة الاختراق المحتملة.
عند الإغلاق أعلى المربع، يتم عرض إشارة دخول وسطر هدف بنسبة 100% من حجم المربع.
كما يتم احتساب وقف الخسارة تلقائيًا إما عند قاع المربع أو عند متوسط متحرك ذكي (SMA) إذا كان حجم المربع كبيرًا.
الميزة الإضافية: إذا تم كسر قاع المربع قبل الاختراق، يتم إلغاء الصفقة تلقائيًا لتجنب الدخول المتأخر.
🧪 للاستفادة التعليمية والتحليل فقط. لا يُعتبر توصية مالية.
Candlestick analysis
Range Filter + ATR Strategy (Low Drawdown)Key Features for Low Drawdown:
Range Filter: Identifies trends while filtering out market noise
ATR-based Position Sizing: Adjusts position size based on volatility to risk a fixed percentage of capital
Trailing Stops: Uses ATR-based trailing stops to lock in profits and limit losses
Conservative Risk Parameters: Defaults to 1% risk per trade (adjustable)
Trend Confirmation: Requires two consecutive closes above/below the range filter
How to Use:
The strategy enters long when price is above the upper range filter for two consecutive bars
Enters short when price is below the lower range filter for two consecutive bars
Uses ATR to size positions appropriately for current volatility
Implements trailing stops based on ATR to protect profits
Optimization Tips:
Adjust the Range Filter period based on your timeframe
Modify the risk percentage (1% is conservative)
Tweak the ATR multiple for trailing stops (1.5 is moderate)
Consider adding a time-based exit if drawdown is still too high
Engulfing DetectorThis script detects classic candlestick reversal patterns known as Engulfing formations:
Bullish Engulfing: A green candle fully engulfs the previous red candle.
Bearish Engulfing: A red candle fully engulfs the previous green candle.
🔎 Features:
Works on any time frame or instrument.
Optional filter to ignore overly large or irregular candles.
Visual signals on the chart (BE/SE labels).
Built-in alerts for automation or notification.
✅ Recommended usage:
For intraday trading, this indicator performs best on the 5-minute chart of the Nasdaq (NQ) between 9:45 AM and 1:00 PM ET (15:45–19:00 CET).
💡 Suggested trading approach:
Optimized for scalping with short-term trades and small take-profits around +0.10%.
ORB 5M + VWAP + Braid Filter + TP 2R o Niveles PreviosORB 5-Minute Breakout Strategy Summary
Strategy Name:
ORB 5M + VWAP + Braid Filter + TP 2R or Previous Levels
Timeframe:
5-minute chart
Trading Window:
9:35 AM to 11:00 AM (New York time)
✅ Entry Conditions:
Opening Range: Defined from 9:30 to 9:35 AM (first 5-minute candle).
Breakout Entry:
Long trade: Price breaks above the opening range high.
Short trade: Price breaks below the opening range low.
Confirmation Filters (All must be met):
Strong candle (green for long, red for short).
VWAP in the direction of the trade.
Braid Filter by Mango2Juice supports the breakout direction (green for long, red for short).
📉 Stop Loss:
Placed at the opposite side of the opening range.
🎯 Take Profit (TP):
+2R (Risk-to-Reward Ratio of 2:1),
or
Closest of the following: previous day’s high/low or premarket levels.
⚙️ Additional Rules:
Only valid signals between 9:35 and 11:00 AM.
Only one trade per breakout direction per day.
Filter out "trap candles" (very small or indecisive candles).
Avoid trading after 11:00 AM.
📊 Performance Goals:
Maintain a high Profit Factor (above 3 ideally).
Focus on tickers with good historical performance under this strategy (e.g., AMZN, PLTR, CVNA).
FVG (Nephew sam remake)Hello i am making my own FVG script inspired by Nephew Sam as his fvg code is not open source. My goal is to replicate his Script and then add in alerts and more functions. Thus, i spent few days trying to code. There is bugs such as lower time frame not showing higher time frame FVG.
This script automatically detects and visualizes Fair Value Gaps (FVGs) — imbalances between demand and supply — across multiple timeframes (15-minute, 1-hour, and 4-hour).
15m chart shows:
15m FVGs (green/red boxes)
1H FVGs (lime/maroon)
4H FVGs (faded green/red with borders) (Bugged For now i only see 1H appearing)
1H chart shows:
1H FVGs
4H FVGs
4H chart shows:
4H FVGs only
There is the function to auto close FVG when a future candle fully disrespected it.
You're welcome to:
🔧 Customize the appearance: adjust box colors, transparency, border style
🧪 Add alerts: e.g., when price enters or fills a gap
📅 Expand to Daily/Weekly: just copy the logic and plug in "D" or "W" as new layers
📈 Build confluence logic: combine this with order blocks, liquidity zones, or ICT concepts
🧠 Experiment with entry signals: e.g., candle confirmation on return to FVG
🚀 Improve performance: if you find a lighter way to track gaps, feel free to optimize!
Separators & Liquidity [K]Separators & Liquidity
This indicator offers a unified visual framework for institutional price behaviour, combining calendar-based levels, intraday session liquidity, and opening price anchors. It is specifically designed for ICT-inspired traders who rely on time-of-day context, prior high/low sweeps, and mitigation dynamics to structure their trading decisions.
Previous Day, Week, and Month Highs/Lows
These levels are dynamically updated and optionally stop projecting forward once mitigated. Mitigation is defined as a confirmed price interaction (touch or break), and labels visually adjust upon confirmation.
Intraday Session Liquidity Zones
Includes:
Asia Session (18:00–02:30 EST)
London Session (02:00–07:00 EST)
New York AM Session (07:00–11:30 EST)
New York Lunch Session (11:30–13:00 EST)
Each session tracks its own high/low with mitigation logic and duplicate filtering to avoid plotting overlapping levels when values are identical to previous session or daily levels.
Opening Price Anchors
Plots key opens:
Midnight (00:00 EST) (Customizable)
New York Open (09:30 EST) (Customizable)
PM Session Open (13:30 EST) (Customizable)
Weekly Open
Monthly Open
These levels serve as orientation for daily range expansion/contraction and premium/discount analysis.
Time Labels
Includes weekday markers and mid-month labels for better visual navigation on intraday and higher timeframes.
All components feature user-defined controls for visibility, line extension, color, label size, and plotting style. Filtering logic prevents redundant lines and maintains chart clarity.
Originality and Justification
While elements such as daily highs/lows and session ranges exist in other indicators, this script combines them under a fully mitigation-aware, duplicate-filtering, and session-synchronized logic model. Each level is tracked and managed independently, but drawn cooperatively using a shared visual and behavioral control system.
This script is not a mashup but an integrated tool designed to support precise execution timing, market structure analysis, and liquidity-based interpretation within ICT-style trading frameworks.
This version does not reuse any code from open-source scripts, and no built-in indicators are merged. The logic is independently constructed for real-time tracking and multi-session visualization.
Inspiration
This tool is inspired by core ICT concepts and time-based session structures commonly discussed in educational content and the broader ICT community.
It also draws conceptual influence from the TFO Killzones & Pivots script by tradeforopp, particularly in the spirit of time-based liquidity tracking and institutional session segmentation. This script was developed independently but aligns in purpose. Full credit is given to TFO as an inspiration source, especially for traders using similar timing models.
Intended Audience
Designed for traders studying or applying:
ICT’s core market structure principles
Power of Three (PO3) setups
Session bias models (e.g., AM reversals, London continuations)
Liquidity sweep and mitigation analysis
Time-of-day-based confluence planning
The script provides structural levels—not signals—and is intended for visual scaffolding around discretionary execution strategies.
Multi-Timeframe MA Breakout/Breakdown Analysis📊 Overview
This sophisticated Pine Script indicator revolutionizes breakout/breakdown analysis by distinguishing between fake and genuine signals using a unique swing-level validation methodology. Unlike traditional moving average crossovers, this system validates price movements against historical swing points, providing traders with high-probability entry and exit signals across multiple timeframes.
🎯 Core Trading Methodology
The Swing Validation Concept:
Traditional MA breakouts often fail because they don't consider the context of previous price action. This indicator solves this by:
Recording swing levels when each MA is initially crossed
Validating subsequent crosses against these historical swing points
Classifying signals as fake or genuine based on this validation
Tracking signal evolution as price action develops
Signal Classification System:
🔻 Breakdown Analysis:
Fake Breakdown: Price cuts below MA but stays above the swing low from previous MA cut
Genuine Breakdown: Price cuts below MA and falls below the swing low from previous MA cut
Validation Chain: EMA 50 validates against EMA 20 swing low, EMA 100 against EMA 50 swing low, EMA 200 against EMA 100 swing low
🔺 Breakout Analysis:
Fake Breakout: Price crosses above MA but stays below the swing high from previous MA cross
Genuine Breakout: Price crosses above MA and exceeds the swing high from previous MA cross
Validation Chain: EMA 50 validates against EMA 20 swing high, EMA 100 against EMA 50 swing high, EMA 200 against EMA 100 swing high
📈 Signal Interpretation Guide
Visual Chart Signals:
Breakdown Signals:
🔻 Orange Triangle Down + "FAKE BREAKDOWN": Potential reversal opportunity - price likely to bounce
🔻 Red Triangle Down + "GENUINE BREAKDOWN": Trend continuation - expect further downside
🔺 Lime Triangle Up + "BULLISH REVERSAL": Strong buy signal after fake breakdown validation
Breakout Signals:
🔺 Orange Triangle Up + "FAKE BREAKOUT": Potential reversal opportunity - price likely to decline
🔺 Dark Red Triangle Up + "GENUINE BREAKOUT": Trend continuation - expect further upside
🔻 Fuchsia Triangle Down + "BEARISH REVERSAL": Strong sell signal after fake breakout validation
Multi-Timeframe Analysis Table:
Signal Column Interpretation:
"FAKE BD" (Orange): Fake breakdown detected - watch for bullish reversal
"GENUINE BD" (Red): Genuine breakdown - bearish continuation likely
"FAKE BO" (Orange): Fake breakout detected - watch for bearish reversal
"GENUINE BO" (Dark Red): Genuine breakout - bullish continuation likely
"BULLISH" (Lime): Bullish reversal confirmed - strong buy signal
"BEARISH" (Fuchsia): Bearish reversal confirmed - strong sell signal
Trend Column:
"BULL" (Green): EMAs in bullish sequence (20>50>100>200)
"BEAR" (Red): EMAs in bearish sequence (20<50<100<200)
"SIDE" (Gray): Sideways/mixed EMA alignment
Status Column:
"Above 200" (Green): Price above 200 EMA - bullish bias
"Below 200" (Red): Price below 200 EMA - bearish bias
"At 200" (Gray): Price at 200 EMA - neutral
💡 Trading Strategies
Strategy 1: Fake Signal Reversal Trading
For Long Entries (Fake Breakdown Reversal):
Wait for fake breakdown signal (orange triangle down)
Confirm bullish reversal (lime triangle up) when price reclaims EMAs
Enter long on bullish reversal confirmation
Stop loss below the swing low that validated the fake breakdown
Target next resistance level or previous swing high
For Short Entries (Fake Breakout Reversal):
Wait for fake breakout signal (orange triangle up)
Confirm bearish reversal (fuchsia triangle down) when price falls below EMAs
Enter short on bearish reversal confirmation
Stop loss above the swing high that validated the fake breakout
Target next support level or previous swing low
Strategy 2: Genuine Signal Trend Following
For Trend Continuation Longs:
Identify genuine breakout (dark red triangle up)
Confirm higher timeframe alignment (4H/1D showing bullish trend)
Enter on pullback to broken resistance (now support)
Stop loss below the validation swing high
Target measured move or next major resistance
For Trend Continuation Shorts:
Identify genuine breakdown (red triangle down)
Confirm higher timeframe alignment (4H/1D showing bearish trend)
Enter on pullback to broken support (now resistance)
Stop loss above the validation swing low
Target measured move or next major support
Strategy 3: Multi-Timeframe Confluence
High-Probability Setups:
Align signals across timeframes (15M signal + 4H trend confirmation)
Look for confluence (multiple timeframes showing same signal type)
Prioritize higher timeframe signals for swing/position trades
Use lower timeframes for precise entry timing
⚠️ Risk Management Rules
Position Sizing:
Fake signal trades: Reduce position size (higher risk, higher reward)
Genuine signal trades: Standard position size (trend following)
Multi-timeframe confluence: Increase position size (higher probability)
Stop Loss Guidelines:
Fake breakdown longs: Stop below validation swing low
Fake breakout shorts: Stop above validation swing high
Genuine signals: Stop beyond the MA that was broken
Reversals: Stop beyond the reversal invalidation level
Take Profit Strategies:
Scale out at key resistance/support levels
Trail stops using the 20 EMA for trend following
Take partial profits at 1:2 risk/reward ratio
Let winners run on strong trend continuation signals
🔧 Best Practices
Signal Validation:
Wait for candle close before acting on signals
Check volume confirmation on breakouts/breakdowns
Consider market context (news, earnings, etc.)
Avoid trading during low liquidity periods
Timeframe Selection:
Scalping: 15M signals with 4H trend filter
Day Trading: 4H signals with 1D trend filter
Swing Trading: 1D signals with 1W trend filter
Position Trading: 1W signals for major moves
Market Conditions:
Trending Markets: Focus on genuine signals for continuation
Range-Bound Markets: Focus on fake signals for reversals
High Volatility: Reduce position sizes and widen stops
Low Volatility: Look for breakout setups with volume
📋 Advanced Tips
Signal Evolution Monitoring:
Watch for signal transitions (fake becoming genuine or vice versa)
Adjust positions when signal classification changes
Use alerts to stay informed of signal updates
Monitor multiple timeframes for comprehensive analysis
Confluence Factors:
Support/Resistance levels at signal points
Volume spikes on genuine signals
RSI divergences with fake signals
Fibonacci retracements at reversal points
Common Pitfalls to Avoid:
Don't chase signals after significant moves
Don't ignore higher timeframe trends
Don't overtrade on every signal
Don't neglect risk management rules
🎯 Quick Reference
Bullish Signals Priority:
Bullish Reversal (Lime) - Highest priority
Fake Breakdown (Orange) - High probability reversal
Genuine Breakout (Dark Red) - Trend continuation
Bearish Signals Priority:
Bearish Reversal (Fuchsia) - Highest priority
Fake Breakout (Orange) - High probability reversal
Genuine Breakdown (Red) - Trend continuation
Multi-Timeframe Hierarchy:
1W: Major trend direction
1D: Intermediate trend and swing levels
4H: Short-term trend and entry timing
15M: Precise entry and exit points
⚡ Pro Tip: The most powerful signals occur when fake signals reverse into genuine signals in the opposite direction, creating high-momentum moves with excellent risk/reward ratios.
Disclaimer: This indicator is for educational purposes. Always combine with proper risk management, additional technical analysis, and fundamental research before making trading decisions. Past performance does not guarantee future results.
GCM Centre Line Candle MarkerGCM Centre Line Candle Marker (GCM-CLCM) - Descriptive Notes
Indicator Overview:
The "GCM Centre Line Candle Marker" is a versatile TradingView overlay indicator designed to enhance chart analysis by drawing short horizontal lines at user-defined "centre" points of candles. These lines provide a quick visual reference to key price levels within each candle, such as midpoints, open, close, or typical prices. The indicator offers extensive customization for line appearance, positioning, and conditional display, including an option to highlight only bullish engulfing patterns.
Key Features:
1. Customizable Line Position:
o Users can choose from various methods to calculate the "centre" price for the line:
(High + Low) / 2 (Default)
(Open + Close) / 2
Close
Open
(Open + High + Low + Close) / 4 (HLCO/4)
(Open + High + Close) / 3 (Typical Price HLC/3 variation)
(Open + Close + Low) / 3 (Typical Price OCL/3 variation)
2. Line Appearance Customization:
o Visibility: Toggle lines on/off.
o Style: Solid, dotted, or dashed lines.
o Width: Adjustable line thickness (1 to 5).
o Length: Defines how many candles forward the line extends (1 to 10).
o Color: Lines are colored based on candle type (bullish/bearish), with user-selectable base colors.
o Dynamic Opacity: Line opacity is dynamically adjusted based on the candle's size relative to recent candles. Larger candles produce more opaque lines (up to the user-defined maximum opacity), while smaller candles result in more transparent lines. This helps significant candles stand out.
3. Price Labels:
o Show Labels: Option to display price labels at the end of each center line.
o Label Background Color: Customizable.
o Dynamic Text Color: Label text color can change based on the movement of the center price:
Green: Current center price is higher than the previous.
Red: Current center price is lower than the previous.
Gray: No change or first label.
o Static Text Color: Alternatively, a fixed color can be used for all labels.
4. Conditional Drawing - Bullish Engulfing Filter:
o Users can enable an option to Only Show Bullish Engulfing Candles. When active, center lines will only be drawn for candles that meet bullish engulfing criteria (current bull candle's body engulfs the previous bear candle's body).
5. Performance Management:
o Max Lines to Show: Limits the number of historical lines displayed on the chart to maintain clarity and performance. Older lines are automatically removed as new ones are drawn.
6. Alert Condition:
o Includes a built-in alert: Big Bullish Candle. This alert triggers when a bullish candle's range (high - low) is greater than the 20-period simple moving average (SMA) of candle ranges.
How It Works:
• For each new candle, the script calculates the "center" price based on the user's Line Position selection.
• If showLines is enabled and (if applicable) the bullish engulfing condition is met, a new line is drawn from the current candle's bar_index at the calculated _center price, extending lineLength candles forward.
• The line's color is determined by whether the candle is bullish (close > open) or bearish (close < open).
• Opacity is calculated dynamically: scaledOpacity = int((100 - maxUserOpacity) * (1 - dynamicFactor) + maxUserOpacity), where dynamicFactor is candleSize / maxSize (current candle size relative to the max size in the last 20 candles). This means maxUserOpacity is the least transparent the line will be (for the largest candles), and smaller candles will have lines approaching full transparency.
• Optional price labels are added at the end of these lines.
• The script manages an array of drawn lines, removing the oldest ones if the maxLines limit is exceeded.
Potential Use Cases:
• Visualizing Intra-Candle Levels: Quickly see midpoints or other key price points without manual drawing.
• Short-Term Reference Points: The extended lines can act as very short-term dynamic support/resistance or points of interest.
• Pattern Recognition: Highlight bullish engulfing patterns or simply emphasize candles based on their calculated center.
• Volatility Indication: The dynamic opacity can subtly indicate periods of larger or smaller candle ranges.
• Confirmation Tool: Use in conjunction with other indicators or trading strategies.
User Input Groups:
• Line Settings: Controls all aspects of the line's appearance and calculation.
• Label Settings: Manages the display and appearance of price labels.
• Other Settings: Contains options for line management and conditional filtering (like Bullish Engulfing).
This indicator provides a clean and customizable way to mark significant price levels within candles, aiding traders in their technical analysis.
multi-tf standard devs [keypoems]Multi-Timeframe Standard Deviations Levels
A visual map of “how far is too far” across any three higher time-frames.
1. What it does
This script plots dynamic price “rails” built from standard deviation (StDev)—the same math that underpins the bell curve—on up to three higher-time-frames (HTFs) at once.
• It measures the volatility of intraday open-to-close increments, reaching back as far as 5000 bars (≈ 20 years on daily data).
• Each HTF can be extended to the next session or truncated at session close for tidy dashboards.
• Lines can be mirrored so you see symmetric positive/negative bands, and optional background fills shade the “probability cone.”
Because ≈ 68 % of moves live inside ±1 StDev, ≈ 95 % inside ±2, and ≈ 99.7 % inside ±3, the plot instantly shows when price is statistically stretched or compressed.
3. Key settings
Higher Time-Frame #1-3 Turn each HTF on/off, pick the interval (anything from 1 min to 1 year), and decide whether lines should extend into the next period.
Show levels for last X days Keep your chart clean by limiting how many historical sessions are displayed (1-50).
Based on last X periods Length of the StDev sample. Long look-backs (e.g. 5 000) iron-out day-to-day noise; short look-backs make the bands flex with recent volatility.
Fib Settings Toggle each multiple, line thickness/style/colour, label size, whether to print the numeric level, the live price, the HTF label, and whether to tint the background (choose your own opacity).
4. Under-the-hood notes
StDev is calculated on (close – open) / open rather than absolute prices, making the band width scale-agnostic.
Watch for tests of ±1:
Momentum traders ride the breakout with a target at the next band.
Mean-reversion traders wait for the first stall candle and trade back to zero line or VWAP.
Bottom line: Multi-Timeframe Standard-Deviations turns raw volatility math into an intuitive “price terrain map,” helping you instantly judge whether a move is ordinary, stretched, or extreme—across the time-frames that matter to you.
Original code by fadizeidan and stats by NQStats's ProbableChris.
Swing High/Low by %REnglish Description
Swing High/Low by %R
This indicator identifies potential swing high and swing low points by combining William %R overbought/oversold turning points with classic swing price structures.
Swing High: Detected when William %R turns down from overbought territory and the price forms a local high (higher than both neighboring bars).
Swing Low: Detected when William %R turns up from oversold territory and the price forms a local low (lower than both neighboring bars).
This tool is designed to help traders spot possible market reversals and better time their entries and exits.
Customizable parameters:
Williams %R period
Overbought & Oversold thresholds
The indicator plots clear signals above/below price bars for easy visualization.
For educational purposes. Please use with proper risk management!
คำอธิบายภาษาไทย
Swing High/Low by %R
อินดิเคเตอร์นี้ใช้ระบุจุด Swing High และ Swing Low ที่มีโอกาสเป็นจุดกลับตัวของตลาด โดยอาศัยสัญญาณจาก William %R ที่พลิกกลับตัวบริเวณ overbought/oversold ร่วมกับโครงสร้างราคาแบบ swing
Swing High: เกิดเมื่อ William %R พลิกกลับลงจากเขต Overbought และราคาแท่งกลางสูงกว่าทั้งสองแท่งข้างเคียง
Swing Low: เกิดเมื่อ William %R พลิกกลับขึ้นจากเขต Oversold และราคาแท่งกลางต่ำกว่าทั้งสองแท่งข้างเคียง
ช่วยให้เทรดเดอร์สามารถมองเห็นโอกาสในการกลับตัวของราคา และใช้ประกอบการวางแผนจังหวะเข้าหรือออกจากตลาดได้อย่างแม่นยำมากขึ้น
ตั้งค่าได้:
ระยะเวลา Williams %R
ค่าขอบเขต Overbought & Oversold
อินดิเคเตอร์จะแสดงสัญลักษณ์อย่างชัดเจนบนกราฟเพื่อความสะดวกในการใช้งาน
ควรใช้ร่วมกับการบริหารความเสี่ยง
Hilbert micro trends MainThe HILBERT MICRO TRENDS indicator uses advanced Digital Signal Processing techniques to uncover hidden characteristics in price series, providing a statistical edge across all types of assets. This indicator specializes in detecting short- and medium-term micro trends, which can appear isolated, embedded within larger trends, or even during broad-ranging price phases.
It operates with a single parameter, simplifying configuration and greatly reducing the risk of overfitting. HILBERT MICRO TRENDS applies modern low-pass and high-pass filtering techniques to smooth price data and remove noise efficiently across multiple levels. The mathematical formulas generate four recursively smoothed series, each more refined than the last in a subtle and precise way, avoiding abrupt changes. These smoothed series outperform traditional moving averages in every aspect: they have less lag (detecting trend shifts faster), generate fewer false signals, and stay closer to price action. This gives them an edge over standard indicators and algorithms based on conventional moving averages such as the simple, exponential, Kalman, or Hull MA.
Visual Structure
The indicator displays in two parts: one on the main chart and one on a sub-chart. On the main chart, the four smoothed series create a shaded area, with the upper and lower bounds representing the maximum and minimum of the series. If a series is rising (positive derivative), it signals bullish momentum; if falling, bearish. Since each series has a different smoothing level, they represent different time perspectives, and the indicator considers all four simultaneously. If all series are bullish, the area turns solid green. If three are bullish and one bearish, it's pale green. Two bullish, two bearish: gray. One bullish and three bearish: pale red. All bearish: solid red. A confirmed micro trend is present only when all four are aligned, i.e., when the area is pure green or red.
The sub-chart displays a histogram version of the same shaded area as an oscillator. An additional smoothed line tracks when the width of this shaded area expands or contracts.
How to Use and Interpret
As stated, the goal is to detect micro trends in price. The first rule is to open long positions only when the area is solid green, and shorts only when it’s solid red. Transitions from pale green to solid green can signal the start of a bullish micro trend, and similarly, from pale red to solid red for bearish trends. The width of the shaded area indicates the strength of the movement (best seen in the histogram). A wider area suggests stronger momentum, which is related to volatility only when a micro trend is active.
Use the orange line in the histogram to determine whether the micro trend is gaining or losing strength. A decreasing width suggests the trend might be ending, signaling an exit opportunity. However, since the orange line lags behind, it’s better used as confirmation rather than a trigger. For quicker signals, changes to pure red or green are more effective.
Price Relationship
Pay attention to the price's relative position to the shaded area. If the price stays within or fluctuates inside the area, it's usually a sign of a ranging market with no clear trend—avoid trading in such conditions. However, if the price breaks out and moves away from the area, it's a strong sign a micro trend has begun. When the price returns to the shaded area, the trend might be ending.
The indicator also marks pivot points from the last pure green or red zone. While not directly used to enter trades, these serve as useful price action reference points for combining with other strategies or tools.
Parameter Settings
The indicator includes a single but crucial parameter that controls smoothing intensity. A low value makes the indicator faster; a higher value slows it down. Success depends on choosing the right setting for the market environment. For long, clear trends, use higher values (80–100), as late entries are acceptable and premature exits are avoided. For shorter, mean-reverting trends, lower values (~40) are better to avoid lag. The default setting is 60, which suits most markets, but users are encouraged to adjust it to current conditions.
Always identify the current market phase and backtest how past micro trends have behaved on the instrument being traded. This ensures the indicator is tuned to the asset’s behavior and can deliver optimal results.
BD Markup V5BD Markup V5 — Multi-Time-Frame Extremes & Session Shading
Pine Script v6 • overlay = true
What the indicator does
BD Markup V5 automatically plots horizontal extreme levels (highs & lows) taken from completed candles on seven standard time-frames:
1 Year (Y) – Purple – “Show Yearly”
1 Month (M) – Red – “Show Monthly”
1 Week (W) – Orange – “Show Weekly”
1 Day (D) – Green – “Show Daily”
4 Hour (4H) – Black – “Show 4H”
1 Hour (H1) – Yellow – “Show H1”
15 Minutes (M15) – Maroon – “Show M15”
For every candle that closes the script:
Stores that candle’s high & low.
When a new candle of the same aggregation begins, draws two horizontal lines at those stored prices.
Extends each line to the right until price touches it ; at first touch the extension stops.
To keep the chart tidy you can set a Candle Count per time-frame so only the most-recent n highs & lows remain.
A Base Time-Frame filter hides all lower-TF lines (e.g. choosing “H4” hides H1 & M15).
The indicator also includes three custom intraday sessions whose backgrounds can be shaded with user-defined colours & transparency.
Key inputs
Base Time-Frame – show only levels whose aggregation order is equal or larger.
Show TF? check-boxes – enable/disable individual layers.
Colour pickers & Candle Count – customise appearance & history depth for each layer.
Chart Timezone – accepts any IANA name or UTC/GMT offset.
Session 1-3 – toggle, set session string (HHMM-HHMM), colour, and opacity.
How overlapping levels are handled
When a new line would be created at exactly the same price as an existing one:
If the new level comes from a higher time-frame, lower-TF duplicates are removed.
If it comes from a lower time-frame, the script skips drawing to preserve the higher-TF level.
This hierarchy keeps the chart clean and emphasises the most significant structure.
Practical uses
Highlight macro structure (yearly / monthly / weekly extremes).
Mark intraday reference points (previous session highs & lows).
Combine with your own strategies for bias, targets, or liquidity zones.
Visually compare price behaviour inside custom trading sessions.
Limitations & notes
Levels are based on completed candles only; they never repaint but always lag one full period.
Once price touches a level its extension stops, but the line remains until pruned by your Candle Count setting.
The script caps total line objects at 500 to stay within Pine runtime limits.
Disclaimer
This script is published for informational and educational purposes only.
It does not constitute financial advice and is not a solicitation to buy or sell any asset.
Trading and investing involve substantial risk; always perform your own research and consult a licensed professional before acting on any idea.
Past performance or historical levels do not guarantee future results.
By using this indicator you agree that the author is not liable for any loss or damage arising from its use.
15-Min ORB Strategy with TP/SL
🔧 How It Works
Opening Range Defined
At market open, it tracks the first 15-minute candle.
The high and low of that candle form the Opening Range.
Breakout Detection
A Buy Signal is triggered when price closes above the ORB high (with confirmation).
A Sell Signal is triggered when price closes below the ORB low.
Trade Management
On a confirmed breakout, the script:
Records the entry price.
Calculates Take Profit (TP) and Stop Loss (SL) using user-defined multipliers of the ORB range.
Positions are exited when either TP or SL is hit.
State Tracking
It tracks whether you're in a trade and whether it’s a long or short.
Once exited, the trade resets and waits for a new signal the next session.
📌 Visual Elements
Green line: ORB High
Red line: ORB Low
Blue line: Active Take Profit (if in trade)
Orange line: Active Stop Loss (if in trade)
Buy/Sell Labels: Signal markers below/above candles for clear entry visibility
⚙️ Customizable Inputs
Take Profit Multiplier (default 1.5× ORB range)
Stop Loss Multiplier (default 1.0× ORB range)
Session Start/End time for ORB definition
✅ Ideal For:
Traders who want clean, rule-based signals with no indicators
Quick intraday setups using price action only
Adaptation to almost any liquid market (just adjust session times)
Sniper SweepsPurpose
Detect when price sweeps above recent highs (buy-side liquidity) or below recent lows (sell-side liquidity), but closes back inside the range. This is often interpreted as a stop-hunt or liquidity grab by institutional traders.
Core Concepts
Liquidity Sweep: When price briefly breaks a recent swing high/low (potentially triggering stop losses), but then closes back within the previous range.
Buy-side Sweep: Price breaks a previous high, but closes below it.
Sell-side Sweep: Price breaks a previous low, but closes above it.
Summary
This indicator is useful for:
Identifying potential stop-hunts or liquidity grabs.
Recognizing SMC trade setups around swept highs/lows.
Getting alerted when significant liquidity levels are manipulated.
Consecutive Candle CounterConsecutive Condition Counter is a versatile indicator that tracks and visualizes consecutive candles based on user-defined market conditions. It helps traders quickly identify streaks of bullish or bearish signals by counting how many bars in a row satisfy the selected condition.
🔍 Features:
Three selectable conditions via a dropdown:
Up & Down Days: Counts consecutive up or down candles. Each up candle adds +1, each down candle subtracts -1. The counter resets when direction changes.
RSI Signal: Counts how many consecutive bars RSI remains above 70 (+1 per bar) or below 30 (-1 per bar). Resets when RSI moves back to the neutral zone.
SMA Positioning: Counts consecutive bars where price stays above (+1) or below (-1) a Simple Moving Average (SMA). SMA period is user-defined.
📊 Visualization:
Positive streaks are shown in green, negative streaks in red, and neutral values in gray.
Displayed as a histogram below the chart for quick pattern recognition.
⚙️ Inputs:
Choose condition logic from the dropdown.
Configure the RSI period and SMA period as needed.
This tool can be helpful for identifying momentum streaks, overbought/oversold trends, or trend-following behavior in a visually intuitive way.
Rollover Candles 23:00-00:00 UTC+1This indicator highlights the Forex Market Rollover candles during which the spreads get very high and some 'fake price action' occurs. By marking them orange you always know you are dealing with a rollover candle and these wicks/candles usually get taken out later on because there are no orders in these candles.
Optimal settings: The rollover takes only 1 hour, so put the visibility of the indicator on the 1 hour time frame and below (or just the 1h).
MTF PO3 Big Candle[RanaAlgo]The MTF PO3 Big Candle indicator displays a synthetic higher-timeframe candle (e.g., 1D or 4H) directly on your current chart for easier multi-timeframe analysis. It fetches OHLC data from the selected timeframe and plots a large, customizable candle with adjustable body thickness, optional wicks, and clear price labels. Dotted guide lines extend the high and low prices backward for reference, while an optional countdown timer shows the remaining time until the candle closes. The candle updates in real-time without repainting, helping traders track key levels from higher timeframes without switching charts. Colors, positioning, and visibility of elements can be fully customized.
CCT SuperTrade 2025CCT SuperTrade 2025
An original combination of two well-established methodologies for identifying potential market entry and exit opportunities.
General Concept
This script merges principles from the Hi-Lo Activator and the “Holy Grail” strategy developed by Linda Raschke and Laurence Connors. It was conceived by the Central Crypto Traders team and remains closed-source to protect the originality of its logic and scoring system.
Hi-Lo Activator
The Hi-Lo Activator focuses on points of price compression followed by breakouts, much like a compressed spring releasing its energy. This indicator monitors market contraction using simple MAs focusing in low and High candle points.
Holy Grail
Based on the work of Linda Raschke and Laurence Connors, the “Holy Grail” centers on 20-period simple moving average and pullbacks in trending markets using ADX indicator. In this script, we incorporate additional price filters to reinforce the identification of strong trends and pinpoint entry opportunities during retracements.
Unique Scoring System
The script’s logic evaluates multiple factors (trend, momentum, volatility) and generates a proprietary scoring system.
Each signal arises from a confluence of criteria, providing clearer indications for traders looking to identify buy or sell opportunities.
Triple Bollinger Bands and Strategic Zoning
This indicator integrates a customized triple Bollinger Bands setup to establish clear internal trading zones: Sell Zone, Neutral Zone, and Buy Zone. These zones guide traders on potential market reversals or continuation points. Additionally, the outer Bollinger Band set at 3 standard deviations (Dev3) identifies extreme volatility boundaries—price action rarely sustains movements beyond this level, signaling potential short-term exhaustion or reversal points.
Color Candle System (Trend + Volume + Momentum)
The indicator utilizes an advanced 9-color candle system, combining real-time trend, volume, and momentum data into a visual scale. Each candle color corresponds to a unique market condition, providing traders with instant and intuitive insights into current market sentiment and strength.
Additional Indicator Features
The indicator also includes several supplementary tools to enhance analysis precision:
Four customizable moving averages, selectable among EMA, SMA, WMA, HMA, DEMA, and VWMA, allowing tailored trend analysis.
A proprietary Fibonacci-based trendline, developed exclusively by our team, for dynamic identification of market direction and key support/resistance levels.
Labels clearly identifying plotted lines, significantly simplifying chart interpretation.
Pivot indicators, highlighting critical swing-high and swing-low points, aiding traders in spotting potential market reversals and continuation patterns.
The indicator also features an optional flag to highlight Inside Bars, candlestick patterns indicating price consolidation that can signal impending breakouts or reversals.
The indicator includes dedicated signals to detect potential Pump and Dump scenarios, identified through abnormal volume spikes coupled with significant short-term price fluctuations, warning traders of potentially manipulated or highly speculative market movements.
The indicator identifies possible trend reversals triggered by volume spikes, highlighting moments when significant increases in trading volume coincide with abrupt price changes, potentially signaling exhaustion or initiation of new trends.
Parabolic SAR Integration
The indicator also integrates the Parabolic SAR (Stop and Reverse), clearly marking dynamic points of trend reversal on the chart. This allows traders to quickly visualize potential changes in market direction and manage trade entries or exits more effectively.
Integrated Information Panel
The indicator features a dynamic Info Panel that provides real-time textual readings of all relevant indicators used within the combined strategies. This panel conveniently displays values such as trend strength, momentum status, volatility levels, stochastic signals, ADX strength, and other key metrics already mapped by the script, allowing traders to quickly interpret market conditions and make informed decisions.
Usage and Application
Designed for various trading styles (swing or intraday), this indicator highlights trend shifts and potential reversal points.
When applied to the chart, CCT SuperTrade 2025 should be active unically to avoid unnecessary clutter and ensure straightforward interpretation.
Originality
The key innovation lies in the way we combine and score the signals using our unique score system with the “Hi-Lo Strategy” and the “Holy Grail.”
The code is closed-source due to the unique research and development carried out by our team, resulting in a hybrid algorithm that has no open-source equivalent.
Disclaimer
This script does not guarantee success and does not replace independent analysis. Financial markets carry risks; traders should proceed with caution and further study before making decisions. DYOR
Technical Disclaimer
This indicator is programmed using Pine Script V6, leveraging standard functions and calculations provided by ©TradingView , ensuring the accuracy, integrity, and reliability of the presented market data and signals. However, past performance does not guarantee future results. Always conduct independent analysis and trade responsibly.
It is important to clarify that the CCT SuperTrade 2025 is not a “multi-indicator” developed solely for the purpose of aggregating various visual tools into a single script.
Each of its components—despite being optionally visible as standalone plots—feeds critical data into the script’s integrated scoring system.
These internal modules are interdependent, and none function in isolation or deliver valid signals independently.
Therefore, this makes the CCT SuperTrade 2025 a singular, cohesive algorithm rather than a modular toolkit. The architecture was intentionally designed this way to preserve the logic, flow, and accuracy of the signal generation engine, reinforcing the integrity of the system as a whole. Any attempt to separate these components would compromise the core mechanism and invalidate its analytical structure.
Calendar TableThis script displays a calendar-style visual grid directly on the TradingView chart. Unlike fundamental calendars or event indicators, this tool does not mark earnings, news, or economic data. Instead, it provides a simple and clean visual calendar layout for better understanding of date structures across timeframes.
The purpose of this script is purely visual – helping traders and analysts recognize monthly, weekly, and daily boundaries in a calendar format. It’s especially useful for visually aligning price action with time cycles, month-start effects, or periodic strategies.
✅ Key Features
🗓️ Calendar Grid Overlay
Displays calendar-style lines or boxes across candles based on real date logic (year, month, day).
📦 Minimalist Design
Non-intrusive layout that doesn’t interfere with price action or indicators.
⏳ Timeframe-Aware
Adjusts the calendar structure to match the selected chart timeframe.
🎨 Custom Styling Options
Choose line colors, label sizes, and boundary highlights.
⚙️ How to Use
Add the script to your chart.Adjust the visual style and frequency in the settings .
⚠️ Notes
This script does not fetch news, earnings, or events.
It is purely a static calendar layout based on date/time.
No user-defined events, reminders, or alerts are included.
📄 Licensing
This script is Protected Script its only for educational and analytical use.
OHLC 0.5 @SplintsThis indicator provides a dynamic visualization of OHLC levels, allowing traders to analyze price action across multiple candles with enhanced clarity. It features customizable options for timeframe selection, candle count, and mid-level calculations (High/Low 50% and Open/Close 50%). The script utilizes gradient-based coloring for a clear distinction between levels and supports dynamic extension for better visibility.
Key Features:
Displays Open, High, Low, and Close levels with adjustable extension lengths
Supports mid-level calculations for enhanced trade decision-making
Gradient coloring for improved visual clarity across multiple candles
Configurable labels for quick reference to key price points
Efficient object management using arrays for optimized performance
Perfect for traders seeking structured insights into candle dynamics and session-based analysis.
Order Blocks📈 Order Blocks Only (With Mitigation Alerts)
This indicator identifies bullish and bearish order blocks on your chart and alerts you when they are formed or mitigated . Order blocks are key institutional price levels where strong buying or selling has previously occurred, often leading to significant future price reactions.
🔍 How It Works:
-Bullish Order Block: Formed when price closes above the high of a recent bearish candle. This suggests buyers have taken control.
-Bearish Order Block: Formed when price closes below the low of a recent bullish candle. This signals seller dominance.
-Once an order block is formed, a box is drawn on the chart to highlight the zone.
-These boxes last for a user-defined number of bars (default is 20) and can be automatically removed when price mitigates (retests and closes beyond) the zone.
🛠 User Settings:
-Show Bullish Order Blocks – Toggle green zones on/off.
-Show Bearish Order Blocks – Toggle red zones on/off.
-Order Block Duration – How many bars the boxes should remain on the chart.
-Delete Mitigated Boxes – If enabled, mitigated zones are automatically removed.
-Custom Colors – Personalize the fill and border colors of bullish and bearish blocks.
🔔 Alerts:
This tool supports four built-in alert types:
-Bullish Order Block Formed
-Bearish Order Block Formed
-Bullish Order Block Mitigated
-Bearish Order Block Mitigated
Set these alerts to stay on top of key price reactions.
✅ How to Use It:
1. Apply the indicator to any chart and timeframe.
2. Watch for new order blocks to form after strong price breaks.
3. Use these zones as potential entry points, stop placement areas, or take profit zones.
4. Enable alerts to catch key institutional levels as they form or are retested.
Failed 2s - The StratDescription:
This indicator detects and highlights "Failed 2" candlestick patterns from The Strat methodology — key price action setups signaling potential reversals or continuation points. It automatically identifies Failed 2 Down (Failed 2D) and Failed 2 Up (Failed 2U) signals by analyzing two consecutive bars, with special attention to price interaction at the 50% midpoint of the previous candle.
Visuals:
- Green upward triangles mark Failed 2 Down signals (bullish setups).
- Red downward triangles mark Failed 2 Up signals (bearish setups).
- Special signals that touch the 50% midpoint of the previous candle are emphasized but use the same shapes.
Alerts:
Built-in alert conditions let you receive notifications when these patterns occur, so you never miss a trade opportunity.
How to Use ALERTS in TradingView
- Paste this code into Pine Editor on TradingView.
- Click Add to Chart.
Set alerts:
- Click "Alerts" → "Condition" = your indicator name
- Choose the alert type (e.g. "Failed 2D Bar Alert")
- Set "Once per bar close"
- Customize the notification method (pop-up, app, email, etc.)
Auto Price Action SR Levels by Chaitu50cAuto Price Action SR Levels by Chaitu50c:
This is a session-based support and resistance indicator that identifies price levels based on actual candle activity, without relying on traditional indicators. It works by clustering open, high, low, or close values of past candles that frequently occur within a defined price range, making it a reliable price action-based tool for intraday traders.
The indicator calculates these levels at the start of each new trading session (based on NSE 09:15 time) and keeps them static throughout the session. This avoids unnecessary noise or flickering due to live price action, giving traders consistent zones to work with during the day.
FEATURES:
* Automatic detection of support and resistance levels based on candle price hits
* Cluster formation using high/low or open/close logic
* Static levels: calculated once per session and remain unchanged until the next session
* Adjustable settings for:
* Cluster range (in points)
* Number of lookback candles
* Line width
* Line color (default: black)
* Minimalist design for a clean chart experience
HOW IT WORKS:
The indicator looks back over a defined number of candles at the beginning of each session. It clusters prices that fall within a specified range (e.g., 250 points) and counts how many times they appear as open, high, low, or close values. If a price level is hit at least once (default), it is considered significant and a line is plotted.
Because clustering is done once per session, the lines do not shift during the session. This allows traders to base decisions on fixed, stable levels formed by prior market structure.
RECOMMENDED FOR:
* Intraday traders
* Price action traders
* Traders who prefer clean charts with logical SR zones
* Nifty, BankNifty, and stock-based day trading
Created by Chaitu50c for traders who rely on logic and structure, not signals.
Disclaimer:
This indicator is intended for educational and informational purposes only. It does not constitute financial advice or trading recommendations. Use at your own discretion and always manage risk responsibly.
---
Let me know if you’d like to include use-case examples or screenshots before publishing.
