Inizia

Timesessions

EventsLibrary "Events" events()   Returns the list of dates supported by this library as a string array.   Returns: array : Names of events supported by this library fomcMeetings()   Gets the FOMC Meeting Dates. The FOMC meets eight times a year to determine the course of monetary policy. The FOMC announces its decision on the federal funds rate at the conclusion of each meeting and also issues a statement that provides information on the economic outlook and the Committee's assessment of the risks to the outlook.   Returns: array : FOMC Meeting Dates as timestamps fomcMinutes()   Gets the FOMC Meeting Minutes Dates. The FOMC Minutes are released three weeks after each FOMC meeting. The Minutes provide information on the Committee's deliberations and decisions at the meeting.   Returns: array : FOMC Meeting Minutes Dates as timestamps ppiReleases()   Gets the Producer Price Index (PPI) Dates. The Producer Price Index (PPI) measures the average change over time in the selling prices received by domestic producers for their output. The PPI is a leading indicator of CPI, and CPI is a leading indicator of inflation.   Returns: array : PPI Dates as timestamps cpiReleases()   Gets the Consumer Price Index (CPI) Rekease Dates. The Consumer Price Index (CPI) measures changes in the price level of a market basket of consumer goods and services purchased by households. The CPI is a leading indicator of inflation.   Returns: array : CPI Dates as timestamps csiReleases()   Gets the CSI release dates. The Consumer Sentiment Index (CSI) is a survey of consumer attitudes about the economy and their personal finances. The CSI is a leading indicator of consumer spending.   Returns: array : CSI Dates as timestamps cciReleases()   Gets the CCI release dates. The Conference Board's Consumer Confidence Index (CCI) is a survey of consumer attitudes about the economy and their personal finances. The CCI is a leading indicator of consumer spending.   Returns: array : CCI Dates as timestamps nfpReleases()   Gets the NFP release dates. Nonfarm payrolls is an employment report released monthly by the Bureau of Labor Statistics (BLS) that measures the change in the number of employed people in the United States.   Returns: array : NFP Dates as timestamps eciReleases()   Gets the ECI The Employment Cost Index (ECI) is a measure of the change in the cost of labor,
Libreria Pine Script™
di sherwoodherben2
SH_LibraryLibrary "SH_Library" events()   Returns the list of dates supported by this library as a string array.   Returns: array : Names of events supported by this library fomcMeetings()   Gets the FOMC Meeting Dates. The FOMC meets eight times a year to determine the course of monetary policy. The FOMC announces its decision on the federal funds rate at the conclusion of each meeting and also issues a statement that provides information on the economic outlook and the Committee's assessment of the risks to the outlook.   Returns: array : FOMC Meeting Dates as timestamps fomcMinutes()   Gets the FOMC Meeting Minutes Dates. The FOMC Minutes are released three weeks after each FOMC meeting. The Minutes provide information on the Committee's deliberations and decisions at the meeting.   Returns: array : FOMC Meeting Minutes Dates as timestamps ppiReleases()   Gets the Producer Price Index (PPI) Dates. The Producer Price Index (PPI) measures the average change over time in the selling prices received by domestic producers for their output. The PPI is a leading indicator of CPI, and CPI is a leading indicator of inflation.   Returns: array : PPI Dates as timestamps cpiReleases()   Gets the Consumer Price Index (CPI) Rekease Dates. The Consumer Price Index (CPI) measures changes in the price level of a market basket of consumer goods and services purchased by households. The CPI is a leading indicator of inflation.   Returns: array : CPI Dates as timestamps csiReleases()   Gets the CSI release dates. The Consumer Sentiment Index (CSI) is a survey of consumer attitudes about the economy and their personal finances. The CSI is a leading indicator of consumer spending.   Returns: array : CSI Dates as timestamps cciReleases()   Gets the CCI release dates. The Conference Board's Consumer Confidence Index (CCI) is a survey of consumer attitudes about the economy and their personal finances. The CCI is a leading indicator of consumer spending.   Returns: array : CCI Dates as timestamps nfpReleases()   Gets the NFP release dates. Nonfarm payrolls is an employment report released monthly by the Bureau of Labor Statistics (BLS) that measures the change in the number of employed people in the United States.   Returns: array : NFP Dates as timestamps eciReleases()   Gets the ECI The Employment Cost Index (ECI) is a measure of the change in the cost of labor,
Libreria Pine Script™
di sherwoodherben2
ISODateTimeLibrary "ISODateTime" getDateParts(dateStr)   Get year, month, day from date string.   Parameters:      dateStr : : ISO 8601 format, i.e. "2022-05-04T14:00:00.001000-04:00" or "2022-05-04T14:00:00Z"   Returns: array of int getTimeParts(dateStr)   Get hour, minute, seconds from date string.   Parameters:      dateStr : : ISO 8601 format, i.e. "2022-05-04T14:00:00.001000-04:00" or "2022-05-04T14:00:00Z"   Returns: array of int getUTCTimezone(dateStr)   Get UTC timezone.   Parameters:      dateStr : : ISO 8601 format, i.e. "2022-05-04T14:00:00.001000-04:00" or "2022-05-04T14:00:00Z"   Returns: string UTC timezone
Libreria Pine Script™
di thomastthai
Global_Economic_CalendarLibrary of economic events. Created to display events on the desired chart through the indicator. Countries: USA, China, Eurozone, Russia Importance: 3 stars Source: Investing Библиотека экономических событий. Создана для отображения событий на нужном графике через индикатор. Страны: США, Китай, Еврозона, Россия Важность: 3 звезды Источник: Investing
Libreria Pine Script™
di Cryptaly
Traders_Reality_LibLibrary "Traders_Reality_Lib" This library contains common elements used in Traders Reality scripts calcPvsra(pvsraVolume, pvsraHigh, pvsraLow, pvsraClose, pvsraOpen, redVectorColor, greenVectorColor, violetVectorColor, blueVectorColor, darkGreyCandleColor, lightGrayCandleColor)   calculate the pvsra candle color and return the color as well as an alert if a vector candle has apperared. Situation "Climax" Bars with volume >= 200% of the average volume of the 10 previous chart TFs, or bars where the product of candle spread x candle volume is >= the highest for the 10 previous chart time TFs. Default Colors: Bull bars are green and bear bars are red. Situation "Volume Rising Above Average" Bars with volume >= 150% of the average volume of the 10 previous chart TFs. Default Colors: Bull bars are blue and bear are violet.   Parameters:      pvsraVolume : the instrument volume series (obtained from request.sequrity)      pvsraHigh : the instrument high series (obtained from request.sequrity)      pvsraLow : the instrument low series (obtained from request.sequrity)      pvsraClose : the instrument close series (obtained from request.sequrity)      pvsraOpen : the instrument open series (obtained from request.sequrity)      redVectorColor : red vector candle color      greenVectorColor : green vector candle color      violetVectorColor : violet/pink vector candle color      blueVectorColor : blue vector candle color      darkGreyCandleColor : regular volume candle down candle color - not a vector      lightGrayCandleColor : regular volume candle up candle color - not a vector @return adr(length, barsBack)   Parameters:      length : how many elements of the series to calculate on      barsBack : starting possition for the length calculation - current bar or some other value eg last bar @return adr the adr for the specified lenght adrHigh(adr, fromDo)   Calculate the ADR high given an ADR   Parameters:      adr : the adr      fromDo : boolean flag, if false calculate traditional adr from high low of today, if true calcualte from exchange midnight @return adrHigh the position of the adr high in price adrLow(adr, fromDo)   Parameters:      adr : the adr      fromDo : boolean flag, if false calculate traditional adr from high low of today, if true calcualte from exchange midnight @return adrLow the position of the adr low in price splitSessionString(sessXTime)   given a session in the format 0000-0100:23456 split out the hours and minutes   Parameters:      sessXTime : the session time string usually in the format 0000-0100:23456 @return calcSessionStartEnd(sessXTime, gmt)   calculate the start and end timestamps of the session   Parameters:      sessXTime : the session time string usually in the format 0000-0100:23456      gmt : the gmt offset string usually in the format GMT+1 or GMT+2 etc @return drawOpenRange(sessXTime, sessXcol, showOrX, gmt)   draw open range for a session   Parameters:      sessXTime : session string in the format 0000-0100:23456      sessXcol : the color to be used for the opening range box shading      showOrX : boolean flag to toggle displaying the opening range      gmt : the gmt offset string usually in the format GMT+1 or GMT+2 etc @return void drawSessionHiLo(sessXTime, show_rectangleX, show_labelX, sessXcolLabel, sessXLabel, gmt, sessionLineStyle)   Parameters:      sessXTime : session string in the format 0000-0100:23456      show_rectangleX : show the session high and low lines      show_labelX : show the session label      sessXcolLabel : the color to be used for the hi/low lines and label      sessXLabel : the session label text      gmt : the gmt offset string usually in the format GMT+1 or GMT+2 etc      sessionLineStyle : the line stile for the session high low lines @return void calcDst()   calculate market session dst on/off flags @return indicating if DST is on or off for a particular region timestampPreviousDayOfWeek(previousDayOfWeek, hourOfDay, gmtOffset, oneWeekMillis)   Timestamp any of the 6 previous days in the week (such as last Wednesday at 21 hours GMT)   Parameters:      previousDayOfWeek : Monday or Satruday      hourOfDay : the hour of the day when psy calc is to start      gmtOffset : the gmt offset string usually in the format GMT+1 or GMT+2 etc      oneWeekMillis : the amount if time for a week in milliseconds @return the timestamp of the psy level calculation start time getdayOpen()   get the daily open - basically exchange midnight @return the daily open value which is float price newBar(res)   new_bar: check if we're on a new bar within the session in a given resolution   Parameters:      res : the desired resolution @return true/false is a new bar for the session has started toPips(val)   to_pips Convert value to pips   Parameters:      val : the value to convert to pips @return the value in pips rLabel(ry, rtext, rstyle, rcolor, valid, labelXOffset)   a function that draws a right aligned lable for a series during the current bar   Parameters:      ry : series float the y coordinate of the lable      rtext : the text of the label      rstyle : the style for the lable      rcolor : the color for the label      valid : a boolean flag that allows for turning on or off a lable      labelXOffset : how much to offset the label from the current position rLabelOffset(ry, rtext, rstyle, rcolor, valid, labelXOffset)   a function that draws a right aligned lable for a series during the current bar   Parameters:      ry : series float the y coordinate of the lable      rtext : the text of the label      rstyle : the style for the lable      rcolor : the color for the label      valid : a boolean flag that allows for turning on or off a lable      labelXOffset : how much to offset the label from the current position rLabelLastBar(ry, rtext, rstyle, rcolor, valid, labelXOffset)   a function that draws a right aligned lable for a series only on the last bar   Parameters:      ry : series float the y coordinate of the lable      rtext : the text of the label      rstyle : the style for the lable      rcolor : the color for the label      valid : a boolean flag that allows for turning on or off a lable      labelXOffset : how much to offset the label from the current position drawLine(xSeries, res, tag, xColor, xStyle, xWidth, xExtend, isLabelValid, labelXOffset, validTimeFrame)   a function that draws a line and a label for a series   Parameters:      xSeries : series float the y coordinate of the line/label      res : the desired resolution controlling when a new line will start      tag : the text for the lable      xColor : the color for the label      xStyle : the style for the line      xWidth : the width of the line      xExtend : extend the line      isLabelValid : a boolean flag that allows for turning on or off a label      labelXOffset : how much to offset the label from the current position      validTimeFrame : a boolean flag that allows for turning on or off a line drawn drawLineDO(xSeries, res, tag, xColor, xStyle, xWidth, xExtend, isLabelValid, labelXOffset, validTimeFrame)   a function that draws a line and a label for the daily open series   Parameters:      xSeries : series float the y coordinate of the line/label      res : the desired resolution controlling when a new line will start      tag : the text for the lable      xColor : the color for the label      xStyle : the style for the line      xWidth : the width of the line      xExtend : extend the line      isLabelValid : a boolean flag that allows for turning on or off a label      labelXOffset : how much to offset the label from the current position      validTimeFrame : a boolean flag that allows for turning on or off a line drawn drawPivot(pivotLevel, res, tag, pivotColor, pivotLabelColor, pivotStyle, pivotWidth, pivotExtend, isLabelValid, validTimeFrame, levelStart, pivotLabelXOffset)   draw a pivot line - the line starts one day into the past   Parameters:      pivotLevel : series of the pivot point      res : the desired resolution      tag : the text to appear      pivotColor : the color of the line      pivotLabelColor : the color of the label      pivotStyle : the line style      pivotWidth : the line width      pivotExtend : extend the line      isLabelValid : boolean param allows to turn label on and off      validTimeFrame : only draw the line and label at a valid timeframe      levelStart : basically when to start drawing the levels      pivotLabelXOffset : how much to offset the label from its current postion @return the pivot line series getPvsraFlagByColor(pvsraColor, redVectorColor, greenVectorColor, violetVectorColor, blueVectorColor, lightGrayCandleColor)   convert the pvsra color to an internal code   Parameters:      pvsraColor : the calculated pvsra color      redVectorColor : the user defined red vector color      greenVectorColor : the user defined green vector color      violetVectorColor : the user defined violet vector color      blueVectorColor : the user defined blue vector color      lightGrayCandleColor : the user defined regular up candle color @return pvsra internal code updateZones(pvsra, direction, boxArr, maxlevels, pvsraHigh, pvsraLow, pvsraOpen, pvsraClose, transperancy, zoneupdatetype, zonecolor, zonetype, borderwidth, coloroverride, redVectorColor, greenVectorColor, violetVectorColor, blueVectorColor, lightGrayCandleColor)   a function that draws the unrecovered vector candle zones   Parameters:      pvsra : internal code      direction : above or below the current pa      boxArr : the array containing the boxes that need to be updated      maxlevels : the maximum number of boxes to draw      pvsraHigh : the pvsra high value series      pvsraLow : the pvsra low value series      pvsraOpen : the pvsra open value series      pvsraClose : the pvsra close value series      transperancy : the transparencfy of the vecor candle zones      zoneupdatetype : the zone update type      zonecolor : the zone color if overriden      zonetype : the zone type      borderwidth : the width of the border      coloroverride : if the color overriden      redVectorColor : the user defined red vector color      greenVectorColor : the user defined green vector color      violetVectorColor : the user defined violet vector color      blueVectorColor : the user defined blue vector color      lightGrayCandleColor : the user defined regular up candle color cleanarr(arr)   clean an array from na values   Parameters:      arr : the array to clean @return if the array was cleaned calcPsyLevels(oneWeekMillis, showPsylevels, psyType, sydDST)   calculate the psy levels 4 hour res based on how mt4 does it mt4 code int Li_4 = iBarShift(NULL, PERIOD_H4, iTime(NULL, PERIOD_W1, Li_0)) - 2 - Offset; ObjectCreate("PsychHi", OBJ_TREND, 0, Time , iHigh(NULL, PERIOD_H4, iHighest(NULL, PERIOD_H4, MODE_HIGH, 2, Li_4)), iTime(NULL, PERIOD_W1, 0), iHigh(NULL, PERIOD_H4, iHighest(NULL, PERIOD_H4, MODE_HIGH, 2, Li_4))); so basically because the session is 8 hours and we are looking at a 4 hour resolution we only need to take the highest high an lowest low of 2 bars we use the gmt offset to adjust the 0000-0800 session to Sydney open which is at 2100 during dst and at 2200 otherwize. (dst - spring foward, fall back) keep in mind sydney is in the souther hemisphere so dst is oposite of when london and new york go into dst   Parameters:      oneWeekMillis : a constant value      showPsylevels : should psy levels be calculated      psyType : the type of Psylevels - crypto or forex      sydDST : is Sydney in DST @return
Libreria Pine Script™
di TradersReality
3
EconomicCalendarLibrary "EconomicCalendar" This library is a data provider for important dates and times from the Economic Calendar. events()   Returns the list of dates supported by this library as a string array.   Returns: array : Names of events supported by this library fomcMeetings()   Gets the FOMC Meeting Dates. The FOMC meets eight times a year to determine the course of monetary policy. The FOMC announces its decision on the federal funds rate at the conclusion of each meeting and also issues a statement that provides information on the economic outlook and the Committee's assessment of the risks to the outlook.   Returns: array : FOMC Meeting Dates as timestamps fomcMinutes()   Gets the FOMC Meeting Minutes Dates. The FOMC Minutes are released three weeks after each FOMC meeting. The Minutes provide information on the Committee's deliberations and decisions at the meeting.   Returns: array : FOMC Meeting Minutes Dates as timestamps ppiReleases()   Gets the Producer Price Index (PPI) Dates. The Producer Price Index (PPI) measures the average change over time in the selling prices received by domestic producers for their output. The PPI is a leading indicator of CPI, and CPI is a leading indicator of inflation.   Returns: array : PPI Dates as timestamps cpiReleases()   Gets the Consumer Price Index (CPI) Rekease Dates. The Consumer Price Index (CPI) measures changes in the price level of a market basket of consumer goods and services purchased by households. The CPI is a leading indicator of inflation.   Returns: array : CPI Dates as timestamps csiReleases()   Gets the CSI release dates. The Consumer Sentiment Index (CSI) is a survey of consumer attitudes about the economy and their personal finances. The CSI is a leading indicator of consumer spending.   Returns: array : CSI Dates as timestamps cciReleases()   Gets the CCI release dates. The Conference Board's Consumer Confidence Index (CCI) is a survey of consumer attitudes about the economy and their personal finances. The CCI is a leading indicator of consumer spending.   Returns: array : CCI Dates as timestamps nfpReleases()   Gets the NFP release dates. Nonfarm payrolls is an employment report released monthly by the Bureau of Labor Statistics (BLS) that measures the change in the number of employed people in the United States.   Returns: array : NFP Dates as timestamps
Libreria Pine Script™
di jdehorty
10
Tosch Market Sessions (US/GB/JP)Library "Tosch Market Sessions" Returns if the NYSE, London SE, Tokyo SE are open @function Returns if the NYSE (US), London SE (GB), Tokyo SE (JP) are open @returns bus, bgb, bjp - bool: true if the corresponding exchange is open count - int: count of how many exchanges are open at the moment ccolor - color: color that indicates the number of open exchanges 0 => color.black 1 => color.blue 2 => color.orange 3 => color.white
Libreria Pine Script™
di AirshipPirate
BoxLine_LibLibrary "BoxLine_Lib" personal Library for line and box built in functions lineXY(x)    get x1,y1,x2,y2 in a tuple   Parameters:      x : TODO: line   Returns: tuple of x1,y1,x2,y2 line(x)   Create line with only the y1 value(when line == na) or all when line != na set x1,y1,x2,y2 individually just 1 or all - use just the line value to set the x2 to current bar or time will set to time - will auto pick xloc.bar_index or xloc.bar_time if not used   Parameters:      x : (line line,int x1,float y1,int x2,float y2, string xloc,string extend,color color,string style,int width)   Returns: Line boxXY(x)    get left,top,right,bottom in a tuple   Parameters:      x : box   Returns: tuple of left,top,right,bottom box(x)   Create line with only the top,bottom value(when line == na) or all when box != na set left,top,right,bottom individually just 1 or all - use just the box value to set the right to current bar or time will set to time - if right is above a number that a bar_index wouldnt be   Parameters:      x : box box,int left,float top,int right, float bottom,color border_color, int border_width, string border_style,string extend,string xloc, color bgcolor,string text,string text_size, color text_color, string text_halign,string text_valign,string text_wrap)   Returns: TODO: Box
Libreria Pine Script™
di FFriZz
2
LibBacktestingDayRangeLibrary "LibBacktestingDayRange" TODO: add library description here import Nut_Satit/CalulateWinLoss/version as backtest rangdate(startDate, finishDate)   TODO: add function description here   Parameters:      startDate : TODO: add parameter startDate description here finishDate : TODO: add parameter finishDate description here   Returns: TODO: add what function returns time_cond : TODO: insert variable and buy or sell condition
Libreria Pine Script™
di Nut_Satit
SAT_LIBLibrary "SAT_LIB" TODO: This library regroups indicator's functions and functions i use a lot getRENKOLEVELS(upColor1, dnColor1, HIGH, LOW, ATR)   TODO: RenkoLevels indicator by Mongolor function   Parameters:      upColor1 : TODO: (Type: color) renko up color      dnColor1 : TODO: (Type: color) renko down color      HIGH : TODO: (Type: float)      LOW : TODO: (Type: float)      ATR : TODO: (Type: float)   Returns: TODO: Renkolevels
Libreria Pine Script™
di sosso_bott
6
DateNow█ OVERVIEW Library "DateNow" TODO: Provide today's date based on UNIX time █ INSPIRATIONS Use pinescript v4 functions such as year(), month() and dayofmonth(). Use pinescript v5 function such as switch. Export as string variables. Not using any match function such as math.floor. █ CREDITS RicardoSantos █ KNOWN ISSUES Date for Day display incorrectly by shortage 1 value especially Year equal to or before 1984 Timezone issue. Example : I using GMT+8 for my timezone, try using other GMT will not work. Al least, GMT+2 to GMT+13 is working. GMT-0 to GMT+1 is not working, although already attempt using UTC-10 to UTC-1. dateNow()   : DateNow   Parameters:      : : _timezone   Returns: : YYYY, YY, M, MM, MMM, DD
Libreria Pine Script™
di RozaniGhani-RG
PriceTimeInteractive█ OVERVIEW This library was intended to Get price of given time.input █ CREDITS Credits to TradingView for CAGR Custom Range. █ FUNCTIONS ohlc_time()   : Get OHLC price of given time.input   Parameters:      : : Time (t) must be using time.input   Returns: : OHLC hlc_time()   : Get HLC price of given time.input   Parameters:      : : Time (t) must be using time.input   Returns: : HLC hl_time()   : Get HL price of given time.input   Parameters:      : : Time (t) must be using time.input   Returns: : HL
Libreria Pine Script™
di RozaniGhani-RG
2
Time█   OVERVIEW This library is a Pine Script™ programmer’s tool containing a variety of time related functions to calculate or measure time, or format time into string variables. █   CONCEPTS `formattedTime()`, `formattedDate()` and `formattedDay()` Pine Script™, like many other programming languages, uses timestamps in UNIX format, expressed as the number of milliseconds elapsed since 00:00:00 UTC, 1 January 1970. These three functions convert a UNIX timestamp to a formatted string for human consumption. These are examples of ways you can call the functions, and the ensuing results: CODE RESULT formattedTime(timenow) >>> "00:40:35" formattedTime(timenow, "short") >>> "12:40 AM" formattedTime(timenow, "full") >>> "12:40:35 AM ​UTC​" formattedTime(1000 * 60 * 60 * 3.5, "HH:mm") >>> "03:30" formattedDate(timenow, "short") >>> "4/30/22" formattedDate(timenow, "medium") >>> ​"Apr​ 30, 2022" formattedDate(timenow, "full") >>> "Saturday, April 30, 2022" formattedDay(timenow, "E") >>> "Sat" formattedDay(timenow, "dd.MM.yy") >>> "30.04.22" formattedDay(timenow, "yyyy.MM.dd G 'at' hh:mm:ss z") >>> "2022.04.30 AD at 12:40:35 UTC" These functions use str.format() and some of the special formatting codes it allows for. Pine Script™ documentation does not yet contain complete specifications on these codes, but in the meantime you can find some information in the The Java™ Tutorials and in Java documentation of its MessageFormat class . Note that str.format() implements only a subset of the MessageFormat features in Java. `secondsSince()` The introduction of varip variables in Pine Script™ has made it possible to track the time for which a condition is true when a script is executing on a realtime bar. One obvious use case that comes to mind is to enable trades to exit only when the exit condition has been true for a period of time, whether that period is shorter that the chart's timeframe, or spans across multiple realtime bars. For more information on this function and varip please see our Using `varip` variables publication. `timeFrom( )` When plotting lines , boxes , and labels one often needs to calculate an offset for past or future end points relative to the time a condition or point occurs in history. Using xloc.bar_index is often the easiest solution, but some situations require the use of xloc.bar_time . We introduce `timeFrom()` to assist in calculating time-based offsets. The function calculates a timestamp using a negative (into the past) or positive (into the future) offset from the current bar's starting or closing time, or from the current time of day. The offset can be expressed in units of chart timeframe, or in seconds, minutes, hours, days, months or years. This function was ported from our Time Offset Calculation Framework . `formattedNoOfPeriods()` and `secondsToTfString()` Our final two offerings aim to confront two remaining issues: How much time is represented in a given timestamp? How can I produce a "simple string" timeframe usable with request.security() from a timeframe expressed in seconds? `formattedNoOfPeriods()` converts a time value in ​ms to a quantity of time units. This is useful for calculating a difference in time between 2 points and converting to a desired number of units of time. If no unit is supplied, the function automatically chooses a unit based on a predetermined time step. `secondsToTfString()` converts an input time in seconds to a target timeframe string in timeframe.period string format. This is useful for implementing stepped timeframes relative to the chart time, or calculating multiples of a given chart timeframe. Results from this function are in simple form, which means they are useable as `timeframe` arguments in functions like request.security() . █   NOTES Although the example code is commented in detail, the size of the library justifies some further explanation as many concepts are demonstrated. Key points are as follows:  • ​Pivot points are used to draw lines from. `timeFrom( )` calculates the length of the lines in the specified unit of time.   By default the script uses 20 units of the charts timeframe. Example: a 1hr chart has arrows 20 hours in length.  • At the point of the arrows `formattedNoOfPeriods()` calculates the line length in the specified unit of time from the input menu.   If “Use Input Time” is disabled, a unit of time is automatically assigned.  • At each ​pivot point a label with a formatted date or time is placed with one of the three formatting helper functions to display the time or date the ​pivot occurred.  • A label on the last bar showcases `secondsSince()` . The label goes through three stages of detection for a timed alert.   If the difference between the high and the open in ticks exceeds the input value, a timer starts and will turn the label red once the input time is exceeded to simulate a time-delayed alert.  • In the bottom right of the screen `secondsToTfString()` posts the chart timeframe in a table. This can be multiplied from the input menu. Look first. Then leap. █   FUNCTIONS formattedTime(timeInMs, format)   Converts a UNIX timestamp (in milliseconds) to a formatted time string.   Parameters:      timeInMs : (series float) Timestamp to be formatted.      format : (series string) Format for the time. Optional. The default value is "HH:mm:ss".   Returns: (string) A string containing the formatted time. formattedDate(timeInMs, format)   Converts a UNIX timestamp (in milliseconds) to a formatted date string.   Parameters:      timeInMs : (series float) Timestamp to be formatted.      format : (series string) Format for the date. Optional. The default value is "yyyy-MM-dd".   Returns: (string) A string containing the formatted date. formattedDay(timeInMs, format)   Converts a UNIX timestamp (in milliseconds) to the name of the day of the week.   Parameters:      timeInMs : (series float) Timestamp to be formatted.      format : (series string) Format for the day of the week. Optional. The default value is "EEEE" (complete day name).   Returns: (string) A string containing the day of the week. secondsSince(cond, resetCond)   The duration in milliseconds that a condition has been true.   Parameters:      cond : (series bool) Condition to time.      resetCond : (series bool) When `true`, the duration resets.   Returns: The duration in seconds for which `cond` is continuously true. timeFrom(from, qty, units)   Calculates a +/- time offset in variable units from the current bar's time or from the current time.   Parameters:      from : (series string) Starting time from where the offset is calculated: "bar" to start from the bar's starting time, "close" to start from the bar's closing time, "now" to start from the current time.      qty : (series int) The +/- qty of units of offset required. A "series float" can be used but it will be cast to a "series int".      units : (series string) String containing one of the seven allowed time units: "chart" (chart's timeframe), "seconds", "minutes", "hours", "days", "months", "years".   Returns: (int) The resultant time offset `from` the `qty` of time in the specified `units`. formattedNoOfPeriods(​ms, unit)   Converts a time value in ​ms to a quantity of time units.   Parameters:      ms : (series int) Value of time to be formatted.      unit : (series string) The target unit of time measurement. Options are "seconds", "minutes", "hours", "days", "weeks", "months". If not used one will be automatically assigned.   Returns: (string) A formatted string from the number of `ms` in the specified `unit` of time measurement secondsToTfString(tfInSeconds, mult)   Convert an input time in seconds to target string TF in `timeframe.period` string format.   Parameters:      tfInSeconds : (simple int) a timeframe in seconds to convert to a string.      mult : (simple float) Multiple of `tfInSeconds` to be calculated. Optional. 1 (no multiplier) is default.   Returns: (string) The `tfInSeconds` in `timeframe.period` format usable with `request.security()`.
Libreria Pine Script™
di PineCoders
34