Inizia

Volatilità

STAX# STAX - MapleStax Candle by Candle Automation ## Overview STAX is a trend-following indicator that automates the "MapleStax Candle by Candle (CBC)" methodology for futures and equity trading. This system uses a higher timeframe anchor trend combined with lower timeframe execution filters to identify high-probability pullback entries in the direction of the prevailing trend. ## How It Works ### 1. Anchor Trend Detection (10-Minute CBC Flip) The core of this system is the CBC (Candle by Candle) flip logic on the anchor timeframe (default: 10 minutes): - **Bullish Flip**: Occurs when a 10m candle closes ABOVE the high of the previous 10m candle - **Bearish Flip**: Occurs when a 10m candle closes BELOW the low of the previous 10m candle - Once a flip occurs, the trend remains in that direction until an opposite flip happens The anchor trend is calculated using `request.security()` with `lookahead=barmerge.lookahead_off` and indexed historical data ` ` to ensure non-repainting behavior. This means signals will not change or disappear after they appear. ### 2. Execution Filters (Current Timeframe) On your current chart timeframe (recommended: 3 minutes), the indicator applies two key filters: **EMA Confirmation**: - For LONG signals: 9-period EMA must be greater than 20-period EMA - For SHORT signals: 9-period EMA must be less than 20-period EMA **VWAP Filter** (Strict or Target mode): - **Strict Mode** (default): Only shows signals when price is on the correct side of VWAP - LONG signals only above VWAP - SHORT signals only below VWAP - **Target Mode**: Shows all valid signals but uses VWAP as the take profit target when price is on the "wrong" side ### 3. Entry Signal Logic The indicator looks for pullback entries: - **BUY Signal**: 10m trend is Bullish + EMA 9 > 20 + Current 3m candle is RED (close < open) - Logic: Wait for a red pullback candle in a bullish trend with bullish EMA alignment - **SELL Signal**: 10m trend is Bearish + EMA 9 < 20 + Current 3m candle is GREEN (close > open) - Logic: Wait for a green retracement candle in a bearish trend with bearish EMA alignment This pullback logic helps you enter after a brief counter-trend move, improving risk/reward compared to chasing breakouts. ### 4. Risk Management **Stop Loss**: Automatically set at the previous 10-minute candle's low (for longs) or high (for shorts). This represents the last swing point that would invalidate the trend structure. **Take Profit**: - When aligned with VWAP: Fixed tick-based target (default: 20 ticks, adjustable) - When counter to VWAP: Target is VWAP itself, providing a logical profit target The indicator displays TP and SL levels visually and alerts when they are hit. ### 5. Signal Management To prevent over-trading, the indicator includes a **cooldown period** (default: 10 bars minimum between signals). This stops signal spam in choppy conditions and forces you to wait for the market to develop before taking another trade. ### 6. Time Session Filters Two separate trading sessions can be configured with 12-hour clock inputs: - **Session 1**: Default 9:30 AM - 4:00 PM (New York regular hours) - **Session 2**: Optional second session for extended hours or different time zones Signals only appear during enabled sessions, helping you trade during liquid market hours. ## What Makes This Original This indicator automates a specific methodology (MapleStax CBC) that combines multiple proven concepts: 1. Higher timeframe trend structure (CBC flip logic) 2. Lower timeframe execution timing (EMA filters) 3. Pullback entry strategy (counter-colored candles) 4. Volume-based target selection (VWAP integration) 5. Swing-based stop placement (previous anchor swing points) The combination of these elements into an automated system with visual feedback and alert functionality is what provides value beyond using these indicators separately. ## How to Use 1. **Choose Your Timeframes**: - Anchor timeframe: 10 minutes (adjustable) for trend direction - Execution timeframe: 3-5 minutes recommended for entries 2. **Select VWAP Mode**: - **Strict Mode**: More conservative, only trades with VWAP bias - **Target Mode**: More aggressive, uses VWAP as profit target 3. **Configure Sessions**: Enable Session 1 and optionally Session 2 to match your trading hours 4. **Set Risk Parameters**: Adjust take profit ticks based on your instrument and risk tolerance 5. **Watch for Signals**: - Green "BUY" label below bars = Long entry - Red "SELL" label above bars = Short entry - Dashed red line = Stop loss level - Green "TP ✓" or Red "SL ✗" labels show exit points 6. **Monitor the Status Table**: The table in the top-right shows: - Current 10m trend direction - EMA alignment status - VWAP position - Active session status - Current signal state - Active trade information 7. **Set Alerts**: Use TradingView's alert system with the built-in alert conditions: - BUY Signal - SELL Signal - Take Profit Hit - Stop Loss Hit ## Best Practices - **Recommended Timeframes**: 3m execution chart with 10m anchor works well for active trading - **Instrument Selection**: Works best on liquid futures contracts (ES, NQ, CL, etc.) and major forex pairs - **Session Trading**: Enable Session 1 for New York hours; avoid low-volume periods - **Backtest First**: Always backtest the settings on your specific instrument before live trading - **Use Realistic Parameters**: Default 20-tick TP is conservative; adjust based on instrument volatility ## Limitations and Warnings **This indicator does NOT**: - Guarantee profitable trades (past performance does not indicate future results) - Account for slippage, commissions, or real-world execution challenges - Work equally well in all market conditions (performs poorly in low-volume, range-bound markets) - Replace proper risk management and position sizing - Provide financial advice **Repainting**: This indicator is designed to be non-repainting. Signals use indexed historical data from the anchor timeframe, meaning they will not change or disappear after they appear. However, the current bar's status will update in real-time until it closes. **Market Conditions**: This trend-following pullback system performs best in trending markets with clear directional bias. In choppy, range-bound conditions, expect more false signals despite the cooldown filter. **Stop Loss Execution**: The stop loss levels shown are theoretical. In fast-moving markets, actual fills may occur at worse prices due to slippage. ## Input Parameters **Anchor Settings**: - Anchor Timeframe: Higher timeframe for trend detection (default: 10 minutes) **EMA Settings**: - Fast EMA: Short-period EMA for execution bias (default: 9) - Slow EMA: Long-period EMA for execution bias (default: 20) **VWAP Settings**: - Strict VWAP Filter: Toggle between strict filtering and target mode **Signal Management**: - Min Bars Between Signals: Cooldown period to prevent spam (default: 10 bars) **Time Filters**: - Session 1 & 2: Configure up to two trading sessions with start/end times in 12-hour format **Risk Management**: - Take Profit (Ticks): Fixed tick target when aligned with VWAP (default: 20) **Visual Settings**: - Show Trend Background: Background color based on 10m trend - Show Stop Loss Lines: Display SL levels on chart - Show EMAs: Display 9/20 EMAs on chart - Show VWAP: Display daily VWAP on chart ## Technical Notes - Uses Pine Script v5 - Non-repainting implementation via `request.security()` with `lookahead_off` and indexed data - Suitable for alerts and automated trading integration - Maximum 50 labels and 50 lines to maintain performance - Status table updates on each bar close ## Credits This indicator automates the MapleStax Candle by Candle methodology. The CBC flip logic and pullback entry concept are part of the MapleStax trading education system. --- **Disclaimer**: This indicator is for educational and informational purposes only. It is not financial advice. Trading futures, forex, and equities carries substantial risk of loss. Past performance is not indicative of future results. Always trade with risk capital you can afford to lose and use proper position sizing.
Indicatore Pine Script®
di TradeManager_PRO
ATR Stop LinesATR Stop Lines Plots dynamic stop-loss levels on the price chart based on ATR (Average True Range). Optionally adjusts stop distance based on volatility regime. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 WHAT IT DOES Green line — Long stop (Close − ATR × multiplier) Red line — Short stop (Close + ATR × multiplier) Lines move with price and volatility. When regime-adjust is enabled, stop distance widens in high volatility and tightens in low volatility. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 REGIME-ADJUSTED MULTIPLIERS When enabled, the multiplier auto-adjusts based on the ATR percentile: LOW (< 25th pctl) — 1.0× ATR — Tight stops, small moves expected NORMAL (25–50th pctl) — 1.5× ATR — Standard distance HIGH (50–75th pctl) — 2.0× ATR — Wider to avoid noise EXTREME (> 75th pctl) — 2.5× ATR — Widest, or skip the trade Disable regime-adjust to use a fixed multiplier for all conditions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📈 HOW TO USE Entry: Note stop line level when entering a trade. Set stop-loss at or beyond that level. Trailing: Move stop to new line level as price advances in your favor. Sizing: Wider stop = smaller position to maintain constant risk. Example: BTC Daily, ATR = \$2,000, Regime = HIGH (2.0×) Entry: \$50,000 → Long stop: \$46,000 / Short stop: \$54,000 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 STATUS LABEL VOL — Current regime (LOW / NORMAL / HIGH / EXTREME) ATR — Raw ATR value in price units Mult — Active multiplier Stop Dist — Current stop distance in price units ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ SETTINGS ATR Settings: ATR Length (default: 14) Percentile Lookback (default: 100) Timeframe: Use Fixed Timeframe — Lock to specific TF Fixed Timeframe (default: D) Stop Settings: Regime-Adjusted Multiplier — Toggle auto-adjust on/off Base ATR Multiplier — Used when regime-adjust is off LOW/NORMAL/HIGH/EXTREME Multipliers — Customize per regime Display: Show Long Stop / Show Short Stop Show Status Label Long/Short Stop Colors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 ALERTS Vol → EXTREME Vol → LOW ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💡 COMPANION INDICATOR Use with ATR Volatility Regime (separate pane) for full context: Pane indicator → percentile visualization, zone backgrounds This indicator → actionable stop levels on price chart Both use identical ATR/percentile logic and stay in sync. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 NOTES Works on any timeframe Stops are dynamic — recalculate each bar Not a signal generator — use with your own entry logic ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏷️ TAGS ATR, stop-loss, volatility, risk-management, position-sizing, trailing-stop, swing-trading
Indicatore Pine Script®
di gokcenbuy
ATR Volatility RegimeATR Volatility Regime A volatility classification indicator that uses ATR (Average True Range) percentile ranking to identify LOW , NORMAL , HIGH , or EXTREME volatility conditions. Displayed as a separate pane oscillator (0–100 scale) with colored zones. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💡 WHY THIS INDICATOR? Most volatility indicators show raw ATR — a number without context. Is ATR = 50 high or low? Depends on the asset and recent history. This indicator answers: "Is current volatility high or low for THIS asset, right now?" What it adds over standard ATR: Percentile context — Compares current ATR to its own history Regime classification — Actionable labels instead of raw numbers Visual zones — Instant read without interpretation Optional MTF — Lock to a fixed timeframe while viewing another Auto-adapts — Works on any asset without manual threshold tuning ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 CORE CONCEPTS ATR (Average True Range) Measures volatility in price units — how much an asset typically moves per bar. Directionless (magnitude only, not direction). Calculation: True Range = the greatest of: High − Low (current bar's range) |High − Previous Close| (gap up captured) |Low − Previous Close| (gap down captured) ATR = Moving average of True Range over N bars (default: 14) Percentile Rank (Pctl) Answers: "What percentage of historical values is the current value greater than?" Pctl = 0% → Lowest ATR in lookback period (extreme compression) Pctl = 50% → Median ATR (typical volatility) Pctl = 100% → Highest ATR in lookback period (extreme expansion) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 WHAT IT DOES Classifies current volatility into four regimes: LOW (< 25th percentile) — Compression, breakout likely brewing NORMAL (25th–50th percentile) — Typical market conditions HIGH (50th–75th percentile) — Elevated volatility, use caution EXTREME (> 75th percentile) — Rare expansion, tighten stops or stay flat ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 DISPLAY COMPONENTS Oscillator Line (0–100) ATR percentile rank over time. Color matches regime: Blue = LOW Gray = NORMAL Orange = HIGH Red = EXTREME Zone Backgrounds Colored bands at threshold levels for instant visual reference. Status Label VOL — Current regime ATR — Raw ATR value (for stop sizing) Pctl — Percentile rank (0–100%) TF — Active timeframe (chart or fixed) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📈 HOW TO USE LOW Volatility (Pctl < 25%): Market compressed — "calm before the storm" Watch for breakout setups Pctl = 0% often precedes significant moves NORMAL Volatility (Pctl 25–50%): Typical conditions Standard position sizing and stops HIGH Volatility (Pctl 50–75%): Elevated movement — reduce size Widen stops to avoid noise EXTREME Volatility (Pctl > 75%): Rare, intense conditions Avoid new entries or tighten risk ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ SETTINGS ATR Settings: ATR Length (default: 14) — Period for ATR calculation Percentile Lookback (default: 100) — Bars for percentile ranking Timeframe: Use Fixed Timeframe (default: off) — Lock calculation to specific TF Fixed Timeframe (default: D) — TF to use when fixed mode enabled Thresholds: Low Threshold (default: 25) High Threshold (default: 50) Extreme Threshold (default: 75) Display: Show Zone Background — Toggle colored fills Show Status Label — Toggle info label ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📋 SUGGESTED LOOKBACK BY ASSET Crypto — 100 bars (fast regime shifts) Stocks — 252 bars (one trading year) Forex — 100–150 bars Commodities — 150–200 bars (seasonal patterns) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 ALERTS Vol → EXTREME Vol → HIGH Vol → LOW Vol exits HIGH ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💡 PRACTICAL APPLICATIONS Stop-Loss Sizing: Use raw ATR for stops. Example: Stop = Entry − (1.5 × ATR) Position Sizing: Reduce size when percentile is HIGH or EXTREME. Entry Filtering: LOW regime = prepare for breakout EXTREME regime = avoid new entries ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 NOTES Works on any timeframe — adapts to chart or locks to fixed TF ATR is non-directional — magnitude only Percentile auto-adapts to each asset's volatility profile Not a standalone signal — combine with trend/regime filters ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏷️ TAGS volatility, ATR, average-true-range, percentile, regime, risk-management, position-sizing, swing-trading, MTF
Indicatore Pine Script®
di gokcenbuy
Cloud Donchian + Keltner + Bollinger**XAUUSD M1 - Upper, Middle & Lower Combination Clouds** This indicator combines three widely used volatility channels — Donchian, Keltner, and Bollinger Bands — into a single, clear cloud overlay optimized for the XAUUSD 1-minute chart. **What it does:** - Calculates upper, middle, and lower volatility zones by combining the three channels. - The **Upper Cloud** shows the potential upper price boundary based on the highest highs of the combined indicators. - The **Lower Cloud** shows the potential lower price boundary from the lowest lows of the combined indicators. - The **Middle Cloud** fills the area between the upper cloud’s bottom and lower cloud’s top, colored dynamically: green for rising trends and red for falling trends. - Visible lines highlight the upper and lower cloud boundaries for precise reference. **Why it’s useful:** - Helps traders identify support and resistance zones based on multiple volatility measures. - The dynamic middle cloud coloring provides intuitive visual cues on trend direction and strength. - Designed specifically for scalpers and short-term traders focused on fast-moving gold markets (XAUUSD, 1-minute timeframe). - Fully customizable input parameters allow users to adjust channel lengths and sensitivities to fit their trading style. **Inputs:** - Donchian channel length - Keltner channel EMA length and ATR multiplier - Bollinger Bands length and multiplier - Customizable cloud colors and line colors **Usage notes:** - This is a tool to support decision-making — it should be used in conjunction with other analysis techniques. - It does not provide explicit buy or sell signals but highlights key volatility zones and trend shifts. - Performance depends on market conditions; backtest results do not guarantee future outcomes. - The indicator is open-source and configurable to fit individual preferences. **Important:** - No guaranteed profits — trade responsibly. - Always combine this tool with sound risk management.
Indicatore Pine Script®
di macfonics
EEQI [Environment Quality Index] PyraTime The Problem: Why Good Strategies Fail The number one reason traders lose capital is not a lack of strategy—it is forced execution in poor environments. Most indicators (RSI, MACD, Stochastic) are continuously active, generating signals even when the market is dead, choppy, or chaotic. A breakout strategy that prints money in a trend will destroy your account in a consolidation range. A mean-reversion system that works in chop will fail during a parabolic expansion. The Solution: PyraTime EEQI The Execution Environment Quality Index (EEQI) is a "Gatekeeper" layer for your trading. It does not tell you what to buy or sell; it tells you if you should be trading at all. By aggregating Volatility, Price Structure, and Efficiency into a single composite score, the EEQI answers the most critical question in discretionary trading: "Is the market efficient enough to deploy capital right now?" How It Works: The 3 Core Engines The EEQI calculates a raw "Environment Score" (from -2 to +4) by analyzing three distinct dimensions of price action. 1. Volatility Engine (Usability) The Logic: Measures the "Alive-ness" of the market using ATR Percentiles. The Filter: It detects "Dead Zones" (where price is too flat to hit targets) and "Chaos Zones" (where volatility is too dangerous). Smart Feature (Parabolic Override): If price moves significantly (>2x ATR) in a single candle, the engine recognizes this as "High Momentum" rather than chaos, unlocking Green signals during breakouts. 2. Structure Engine (Bar Quality) The Logic: Analyzes the relationship between candle bodies, wicks, and overlap. The Filter: It penalizes "Barbed Wire" price action—candles with long wicks and high overlap—which indicate indecision and algo-chop. The Goal: We want to trade during "Clean Flow," where candle bodies are large and overlap is low. 3. Efficiency Engine (Directional Flow) The Logic: Compares Net Displacement (start-to-finish distance) vs. Total Distance Traveled. The Filter: Identifies "Whipsaw" conditions where price moves a lot but goes nowhere. Smart Feature (Velocity Lock): If price travels a massive distance quickly, the efficiency requirement is relaxed to catch explosive moves that might otherwise look "messy." The "Smart Gatekeepers" Even if the Core Engines look good, the EEQI applies three final safety checks before granting a PRIME status. Regime Persistence (Stability Check): The market must hold a high score for a set number of bars (default: 1) before the signal turns Green. This prevents "fake-outs" where a single anomaly candle tricks you into entering a bad trend. Volume Validation (Liquidity Check): Price movement without participation is a trap. The EEQI checks Relative Volume (RVOL). If volume is below average (e.g., lunch hour, holidays, or late-night sessions), the score is capped at "Fair" or "Low Vol," preventing execution in thin liquidity. Macro Context (HTF Filter): You cannot trade against the higher timeframe. The EEQI checks the trend and volatility of the Higher Timeframe (default: Weekly). If the macro view is compressed or dead, the local signal is vetoed. How to Read the HUD The Dashboard (Bottom Right) gives you an instant read on the market state. 🟢 PRIME (+4): Execution Optimal. The market is trending, efficient, and backed by volume. This is the "Green Light" for your strategy. 🔵 FAIR (+1 to +3): Tradeable. Conditions are decent, but one factor (e.g., volume or structure) is imperfect. Exercise caution. ⚪ NEUTRAL (0): Indecision. The market is transitioning. Stand aside. 🟡 BUILDING: Wait. The market is good, but hasn't proven itself yet (Persistence Check). 🟠 POOR / LOW VOL: Chop. Price is messy or lacking participation. 🔴 AVOID (-2): Danger Zone. The market is either dead flat or violently chaotic. Do not trade. Settings & Customization The indicator comes with calibrated presets for different asset classes: Crypto: Tolerates higher volatility and requires stronger efficiency confirmation. Forex: Stricter dead-zone filters to handle ranging sessions. Indices: Balanced settings for standard equity hours. Disclaimer This tool is designed for environment analysis only. It does not provide buy or sell signals, entry prices, or stop-losses. It is intended to be used as a filter to improve the performance of your own discretionary strategies.
Indicatore Pine Script®
di PyraTime
Shiva Zone Indicator (True Consolidation Detection)--- # ⭐ **1. Script Title** **Shiva Zone Indicator — True Consolidation Detection** This will appear in the indicator marketplace and search. --- # ⭐ **2. Short Description (shown in search list)** **Automatically detects true consolidation zones using shrinking-range logic, avoiding oversized ranges and highlighting high-probability breakout zones.** --- # ⭐ **3. Full Description (for the Publishing Page)** Copy–paste the entire block below into the “Description” section while publishing: --- ## 🔱 **Shiva Zone Indicator — True Consolidation Detection** The **Shiva Zone Indicator** identifies true consolidation phases in any market using a powerful shrinking-range algorithm. Instead of relying on fixed ranges or ATR compression alone, this model detects **micro-consolidation** by comparing tightening volatility windows, ensuring only **high-quality, compact zones** are plotted. Most consolidation indicators produce long, extended boxes. **Shiva Zone does not.** It only marks consolidation when price tightens *locally*, making it ideal for breakout traders. --- ## 🔍 **How the Indicator Works** A *Shiva Zone* is detected when: * The recent price range is **shrinking** compared to the previous one * Volatility compresses naturally * Price stays within a narrow percentage threshold * Expansion stops the zone (no endless boxes) This ensures consolidation is identified **precisely where traders need it**, not over hundreds of candles. When consolidation ends, volatility expansion triggers a zone closure. Breakouts above or below the box can lead to explosive moves. --- ## ⚡ **Included Alerts** The indicator includes 4 powerful, actionable alerts: 1. **Shiva Zone Started** – A new consolidation zone is forming 2. **Shiva Zone Ended** – Volatility begins expanding 3. **Bullish Breakout** – Price breaks above the Shiva Zone 4. **Bearish Breakout** – Price breaks below the Shiva Zone These alerts make it easy to automate breakout entries or monitor compression zones across markets. --- ## 🎯 **Best Use Cases** * Breakout Trading * Scalping * Intraday Structure Trading * Swing Breakout Analysis * Compression / Expansion Mapping * Multi-Timeframe Structure Tracking Works perfectly on **Forex, Indices, Crypto, Commodities, and Stocks**. --- ## 📌 **Recommended Settings** * Lookback: **8–20** * Max % Range: **0.4–0.8** * Minimum Bars Inside Zone: **4–6** Shorter settings → more sensitive Longer settings → stronger zones --- ## 🧠 **Why It's Called “Shiva Zone”** In market mythology: * **Brahma** = Creation of momentum * **Vishnu** = Sustaining the trend * **Shiva** = Compression before transformation The **Shiva Zone** is the phase where the market contracts its energy before a structural shift or breakout. --- ## ⚠️ **Disclaimer** This indicator is for educational purposes only and not financial advice. Always conduct your own analysis. --- # ⭐ **4. Suggested Tags** Use these exact tags on TradingView for best reach: ``` consolidation price-action volatility range breakout compression supply-and-demand forex scalping trend-analysis ``` --- # ⭐ **5. Script Category** Choose one: ### Recommended: ➡ **Technical Indicators → Volatility** or ➡ **Technical Indicators → Price Action** --- # ⭐ **6. Icon / Cover Image Suggestions** (Create or upload manually — TradingView requires an image) Theme suggestions: * Clean minimalistic yellow/orange box with text **“Shiva Zone Indicator”** * A sample chart screenshot showing a tight consolidation zone * A symbolic icon of contraction/expansion inspired by Shiva (simple geometry, not religious imagery) --- # ⭐ **7. Developer Credits (Optional)** Created by **Dr. Sudhir Khollam** Astrologer & Market Analyst Creator of the SALSA© Method ---
Indicatore Pine Script®
di SudhirKhollam
Brahma Creation Field (SALSA Edition) # ⭐ **1. INDICATOR TITLE** Use a clear, branded, professional name: ### **Brahma Creation Field (BCF) — SALSA© Market Imbalance Indicator** --- # ⭐ **2. SHORT DESCRIPTION (appears in search results)** **Identifies Brahma Creation Fields (BCFs) using SALSA© Market Logic. A rewritten, original imbalance tool inspired by displacement zones, with Creation Strength Line (CSL), integrity breaks, and optional actionable alerts.** --- # ⭐ **3. FULL DESCRIPTION (for the script page)** ### **TradingView-Ready** --- ## **Brahma Creation Field (BCF) — SALSA© Edition** The **Brahma Creation Field (BCF)** Indicator is an *original* SALSA©-based imbalance model designed to identify areas where price rapidly expands with strong intent and leaves behind a “Creation Field.” This indicator is an entirely proprietary rewrite based on **Vedic + SALSA© Interpretation of Market Birth**, and does **not reuse or copy** any external code. It is not affiliated with or derived from any other indicator. --- ## 🔱 **What Is a Brahma Creation Field (BCF)?** In SALSA© Market Dynamics: * **Brahma** = Creation * **Vishnu** = Continuation * **Shiva** = Transformation (destruction/reset) A **BCF** is the *birth moment* of a new price narrative — a zone created when price displaces strongly enough to leave a gap between the candle and the candle two bars earlier. This is interpreted as: * **Bullish BCF** → A strong upward creation event * **Bearish BCF** → A strong downward creation event These “Creation Fields” often act as **reaction points, continuation areas, or reversal zones**. --- ## 🔰 **Key Features** ### **✔ Automatic Detection of Brahma Creation Fields** Identifies both bullish and bearish creation zones using clean imbalance structure. ### **✔ Creation Strength Line (CSL)** A midline through the BCF used to confirm strength, bias, and equilibrium. ### **✔ Integrity Break Logic** When price invalidates the BCF, the zone fades and becomes inactive. ### **✔ Real-Time Updates** BCFs extend automatically as long as they are active. ### **✔ Alerts Included** * Bullish BCF Formed * Bearish BCF Formed * BCF Integrity Broken * Price Inside Active BCF * CSL Cross (Midline Cross) ### **✔ 100% Original Codebase** Fresh, clean Pine Script v6 logic reflecting SALSA© philosophy. --- ## 🔬 **Use Cases** * Forecasting continuation after displacement * Identifying strong zones of liquidity imbalance * Spotting trend birth points * Assessing whether narrative pressure is bullish or bearish * Establishing intraday bias * Creating entry/exit signals * Building automated strategies --- ## ⚠ **License Notice** This indicator is an **original work** created for TradingView, based on **SALSA© Market Theory**. You may NOT resell or rehost the code without explicit permission. If you adapt this script, please give proper credit. --- ## 🙏 **Credits / Attribution** The concepts here are influenced by general imbalance and displacement theory in trading. The code itself is **100% original**, written entirely from scratch. --- # ⭐ **4. TAGS TO USE (Very Important for Visibility)** Add exactly these tags in TradingView: * **imbalance** * **fvg** * **liquidity** * **supplydemand** * **trend** * **intraday** * **bias** * **zones** * **supportresistance** * **marketstructure** * **smartmoney** These tags rank extremely well. --- # ⭐ **5. CATEGORIES** Choose: ✔ **“Technical”** ✔ **“Indicators”** ✔ **“Price Action”** (optional but recommended) --- # ⭐ **6. LICENSE** Choose: ### **© Copyright — Open for Personal Use** or ### **Custom License** Recommended text: > This script is © protected. > > You may use it freely on TradingView for personal analysis, > but you may NOT redistribute, publish variations, or sell this code. --- # ⭐ **7. OPTIONAL – AUTHOR BIO** Include: > Dr. Sudhir Khollam > SALSA© Market Dynamics • Vedic + Financial Astrology > Creator of the SALSA© Method, Astro SALSA© Pro, and SALSA© Prediction Cards --- # ⭐ **8. WHAT TO PUT IN “EXTERNAL SOURCE” SECTION** This is optional, but if you want to be completely transparent: ``` This indicator is a fresh, original rewrite created from scratch. It does not contain or reuse code from any third-party indicator. Conceptually inspired by classical imbalance/displacement logic, translated into a SALSA© creation-phase model. ``` --- # ⭐ **9. SCREENSHOT GUIDELINES (Important for Approval)** Use a chart showing: ✔ At least one Bullish BCF ✔ At least one Bearish BCF ✔ CSL line clearly visible ✔ Integrity break (if possible) ✔ Clean chart (no clutter) ✔ Label arrows added manually (optional) Upload **3 screenshots**, TradingView always prefers multi-angle examples. --- # ⭐ **10. SEO-OPTIMIZED SUMMARY (for search engines)** **SALSA© BCF Indicator is an imbalance-based price action tool that highlights Brahma Creation Fields — the birth of market intent. Featuring CSL midlines, integrity break detection, real-time zone extension, and a full alert suite. Ideal for traders using smart money concepts, FVGs, SMC, or Vedic-based price analysis.** --- # ⭐ **11. PUBLISHING CHECKLIST** ### ✔ Code compiles ### ✔ Description added ### ✔ Screenshot added ### ✔ Tags added ### ✔ License selected ### ✔ Public or Protected selected ### ✔ Test alerts ### ✔ Save + Publish ---
Indicatore Pine Script®
di SudhirKhollam
Tokyo Sessions HighlighterOverview This indicator provides a clean, visual representation of the Asian (Tokyo) trading session by highlighting its specific price range. It is designed to help traders identify the initial intraday range and key liquidity levels established during the Tokyo open. Features Dynamic Range Box: Automatically plots a box from the session's highest high to its lowest low. Real-Time Updates: The box height and price labels update live as new session extremes are reached during the designated hours. Professional Aesthetic: Features a minimalist gray fill, solid black borders, and black text for a clean, professional look on both light and dark chart themes. Instant Data: Displays a label at the bottom of the box showing the exact price range in the format: Tokyo (Lowest Value - Highest Value). How To Use Settings: Adjust the Tokyo Session Time and Timezone in the indicator inputs to match your broker's server time or local requirements. Strategy: Use the highlighted range to identify potential breakouts or to treat the session high and low as institutional liquidity zones for the London and New York sessions. Customization: You can adjust the colors and transparency of the box through the script settings menu.
Indicatore Pine Script®
di cyber00t
Big Trend Catcher: Quad-Gate & VCP & ATR trailing Swing TradeThe Strategy Philosophy This is designed for Daily Charts to capture the large chunks if not all of a primary trend. It focuses on the "VCP" (Volatility Contraction Pattern), combined with high-grade momentum filtering. 1. How VCP (The Quiet Zone) is Calculated The script identifies "Volatility Contraction" by measuring the Bollinger Band Width (BBW). * The Math: It calculates the standard BBW: $(Upper Band - Lower Band) / Mid Band$. * The "Quiet" Threshold: It compares the current width to its own 50-period Simple Moving Average. * The Signal: When the current width is narrower than the 50-period average, the stock is in a "Quiet Zone" (represented by the blue background). This indicates energy is coiling for a potential breakout. 2. How Rate of Change (ROC) is Calculated Unlike a standard ROC, this "Wizard" version uses a smoothed momentum filter to reduce whipsaws: * Raw ROC: First, it calculates the raw percentage change over 15 bars: $100 x (Close / Close(15) - 1). * Smoothing: This raw value is then smoothed using a 10-period EMA. * The Gate: The ROC Gate only turns green when this smoothed value is greater or equal to 0, ensuring the stock has genuine upward velocity before you enter. 3. What the Indicators on the Chart Show * Yellow Line (20 EMA): Your "Tactical Line." It tracks short-term momentum and acts as a trigger for Phoenix re-entries. * Blue/Gray Line (100 EMA): Your "Regime Filter." It turns Blue when the trend slope is positive and Gray when negative. * Thin Gray Outer Bands: These are Bollinger Bands set at 3 Standard Deviations from the 100 EMA. They mark extreme "Climax Zones" where price is statistically overextended. * Stepped Red/Green Line (ATR Stop): The "Iron Floor." It uses a 20-period ATR with a 3.0 multiplier and an HHV (Highest High Value) lookback to ensure the stop only moves up, never down. * Yellow Crosses (Gate Wait): These small icons appear above the bars when a signal has been detected but one or more "Wizard Gates" (such as the ROC or 100 EMA Slope) are not yet satisfied, signifying the strategy is waiting for full confirmation. 4. How to Trade This Strategy * Step 1: The Setup: Look for the Blue Background on the daily chart, signifying a Volatility Contraction. * Step 2: The Entry: An Initial Entry (Lime Triangle) fires when the price breaks out of the Quiet Zone with a volume spike. This volume must be greater than 1.3 times the 20-period Simple Moving Average of volume to confirm significant buying interest. An entry only occurs when all Quad-Gates (ROC, EMA Slope, Price > ATR) are satisfied. * Step 3: Pyramiding: If the trend gains "Velocity" (price > 10% from entry), the script will signal a second unit to maximize gains during runaway moves. * Step 4: The Exit: Sell the entire position if the price closes below the ATR Trailing Stop (Trend Death) or if the 100 EMA trend turns down. 5. The Phoenix Re-entry If you are stopped out but the stock immediately recovers above the 20 EMA within 10 bars, a Phoenix Entry (Orange Triangle) will fire. This allows you to catch "Power Resumptions" where the initial shakeout was a bear trap.
Strategia Pine Script®
di LegalxSeagull
DAX 9-10 Breakout Strategy IndicatorOpening Hour Breakout (ORB) indicator for intraday trading. WHAT IT DOES: • Identifies the price range of a specific hour (default: 9:00-10:00) • Detects breakout direction (Long/Short) when price breaks above HIGH or below LOW • Automatically calculates Take Profit and Stop Loss zones based on range size • Tracks trade outcome (Win/Lose) when TP or SL is hit HOW TO USE: 1. Set the session hour according to your chart's timezone 2. Wait for the session range to form (yellow box) 3. Enter on breakout above HIGH (Long) or below LOW (Short) 4. TP and SL levels are automatically calculated DEFAULT SETTINGS: • TP Multiplier: 1.41x range (Risk:Reward ≈ 1:2.7) • SL Multiplier: 0.52x range FEATURES: • Works on any timeframe (H1, M15, M30, etc.) • Visual zones for session range, TP, and SL • Price labels for all key levels • Entry arrows and direction letters (L/S) • Win/Lose markers (W/X) when trade closes • Fully customizable - show/hide any element • Info panel with live status and R:R ratio • Alert conditions for Entry, TP hit, SL hit BEST USED ON: • DAX (Germany 40) • Other indices: US30, US500, NAS100 • Forex majors during London/NY open NOTE: This is an indicator for visual analysis. Use the Strategy version for backtesting.
Indicatore Pine Script®
di HubertLorenz
Yang-Zhang Stop Lines Yang-Zhang Stop Lines - Advanced Volatility Indicator 📊 Description The Yang-Zhang Stop Lines is an advanced technical indicator that uses the Yang-Zhang volatility estimator to calculate dynamic stop loss and take profit levels. Unlike traditional methods such as ATR or Bollinger Bands, Yang-Zhang considers multiple components of market volatility, offering a more accurate and robust measurement. 🎯 Key Features Superior Volatility Calculation: Implements the complete Yang-Zhang estimator, considering overnight volatility, open-close, and Rogers-Satchell components More accurate than traditional ATR for markets with gaps and distinct sessions Automatically adapts to market conditions Intelligent Levels: Buy Stop (Green): Lower level calculated for long position protection Sell Stop (Red): Upper level calculated for short position protection Mirrored Levels: Additional projections based on daily amplitude Continuous Bands: Real-time visualization of intraday volatility Daily Anchoring: Fixed levels calculated at the beginning of each day Facilitates trade planning with stable references Horizontal lines extending throughout the trading session ⚙️ Configurable Parameters Calculation Timeframe: Defines the period for volatility analysis (default: 60min) Period: Lookback window for statistical calculations (default: 20) Multiplier: Adjusts level sensitivity (default: 1.0) Base Price: Reference for stop calculations (default: close) Visual Options: Bands, fixed lines, labels, fill, and customizable colors 💡 How to Use For Day Traders: Use daily fixed levels as reference for stop loss and targets Watch for price crossovers at levels for reversal signals Mirrored levels serve as extended targets For Swing Traders: Configure higher timeframes (4h, daily) for medium-term analysis Use the multiplier to adjust to your risk/reward objectives Combine with trend analysis and support/resistance Risk Management: Position stops just below/above calculated levels Adjust position size based on amplitude Monitor the info table to check current volatility 📈 Information Table The indicator displays in the top-right corner: Current Yang-Zhang Volatility (in %) Buy Stop Level Sell Stop Level Calculated Amplitude 🔔 Included Alerts Alert when price crosses Buy Stop Alert when price crosses Sell Stop 🎨 Visual Customization Independent colors for each element Adjustable line width Optional fill between bands Optional informative labels 📝 Technical Notes This indicator correctly implements the complete Yang-Zhang estimator formula, including: Overnight variance Open-close variance Rogers-Satchell component Optimized k weighting Ideal for traders seeking a scientific and statistically robust approach to stop definition and volatility analysis. Compatible with all assets and timeframes. Recommended for liquid markets.
Indicatore Pine Script®
di SonicTheHedgehog
Daily maximum price range for Credit SpreadsVolatility & Momentum for Credit Spreads It is a specialized mean-reversion tool designed primarily for options traders focusing on Credit Spreads (specifically 0DTE on SPX) and intraday reversals. By combining Volume Weighted Average Price (VWAP) with VIX-adjusted volatility bands, this indicator identifies statistical extremes where price is likely to revert. Unlike standard Bollinger Bands or Keltner Channels, TITAN adapts its width based on real-time implied volatility (VIX), ensuring that your "overextended" zones are accurate whether the market is calm or chaotic. 🎯 Core Concept The indicator relies on the principle that price moves within a definable "Daily Range" relative to the VWAP. When price pushes to the outer limits of this range while simultaneously hitting RSI extremes; it signals a high-probability reversal setup ideal for selling premium. 🛠 How It Works The engine is built on three pillars: Volatility-Adaptive Bands: The bands are calculated using a 14-day Average Daily Range (ADR), which is then dynamically scaled by the current VIX relative to a baseline. If VIX spikes, the bands widen instantly to keep you safe from premature entries. Momentum Triggers: Signals are generated only when the RSI (14) hits extreme Overbought (>70) or Oversold (<30) levels. "Golden Hour" Filtering: To avoid market open noise or late-day chop, the indicator includes a customizable time filter (Default: 10:15 – 11:30 AM EST). Signals outside this window are suppressed to enforce trading discipline. 🚀 Key Features Visual Strategy Simulation: The indicator now includes a built-in "Strike Simulator." Upon the first valid signal of the session, it automatically plots a horizontal "Strike Line" at the Outer Band ± a user-defined buffer (e.g., 10 points). This helps you visualize your theoretical strike price for the rest of the day. Bull & Bear Zones: Color-coded fills (Green for Bullish Buy Zones, Red for Bearish Sell Zones) make it easy to see market context at a glance. Live Dashboard: A Heads-Up Display (HUD) in the bottom right shows real-time RSI values, Golden Hour status, and current signal state. Unified Alert System: A single master alert condition triggers if price hits an RSI extreme OR touches a volatility band during your active trading window. 📉 How to Trade It (Example Strategy) Wait for the Window: Ensure the "Golden Hour" on the dashboard reads ACTIVE (Default 10:15 AM EST). Identify the Zone: Short Setup (Call Credit Spread): Price pushes into the Red Zone (Outer High). Long Setup (Put Credit Spread): Price pushes into the Green Zone (Outer Low). Confirm the Signal: Look for the Diamond Icon. This confirms RSI has hit the extreme threshold. Check the "Strike Line": Use the simulated horizontal line to identify where your short strike would be (Outer Band + Buffer) to verify it is at a safe distance from current price. ⚙️ Settings ADR Length: Lookback period for daily range calculation (Default: 10). Baseline VIX:* The standard VIX level used for normalization (Default: 15.0). Inner/Outer Multipliers: Controls the width of the bands. Golden Hour: The specific time window for valid signals. Strike Buffer: Points added to the outer band to simulate your option strike price. ⚠️ Disclaimer This tool is for informational purposes only. Trading options, especially 0DTE credit spreads, involves significant risk. Always backtest strategies and manage risk accordingly.
Indicatore Pine Script®
di oXXo1
Volatility Breakout System [Fixed Risk] This is a trend-following breakout strategy designed to capture volatility expansion while filtering out low-momentum "chop." It is built on the philosophy that significant price moves are often preceded by a breakout of volatility bands (Keltner Channels) accompanied by Volume and Trend Strength (ADX). Strategy Logic: Volatility Breakout: The primary trigger is a candle closing outside the Keltner Channels. This indicates price is moving faster than the average range. Trend Filter: Trades are only taken in the direction of the 200 EMA. Momentum Filter (ADX): The ADX filter ensures we only enter when the trend strength is above a specific threshold (Default: 20). This prevents the strategy from buying tops or selling bottoms in ranging markets. Volume Confirmation: A breakout without volume is often a fake-out. This script requires volume to be higher than the moving average. Risk Management (Automated): Stop Loss: Based on ATR (Average True Range) to adapt to current market volatility. Trailing Stop: Once the trade moves in favor, a trailing stop is activated to lock in profits. Breakeven: If price moves X% in favor, the Stop Loss is automatically moved to the entry price to protect capital. Cooldown: Includes a safety mechanism to prevent over-trading immediately after a signal. Backtesting Notes: This script is set up with use_bar_magnifier=true. For accurate results, use this on higher timeframes (1H, 4H) or ensure you have a Premium account for intrabar inspection. Inputs: You can toggle the "Compounding" feature to test fixed cash vs. % equity growth. Webhooks are fully configurable for alert automation.
Strategia Pine Script®
di debdaspt85
11
Mismatch Strategy | Madrimov tradeTitle Mismatch Strategy by Madrimov trade – Gold vs DXY Impulse and Compression Description Concept This indicator is based on a cross-market mismatch principle between Gold (XAUUSD) and the US Dollar Index (DXY). It looks for situations where DXY expands aggressively while Gold temporarily fails to respond, creating a build-up of directional pressure that is often released once Gold breaks its short-term range. Methodology (High-Level Overview) The script evaluates three conditions on the same chart timeframe: DXY Impulse Detection A directional impulse on DXY is detected when the candle’s range exceeds a multiple of its ATR, indicating unusually strong participation rather than normal fluctuation. Gold Compression Filter At the same time, Gold must remain compressed, defined as a candle range significantly smaller than its own ATR. This represents under-reaction or absorption despite external pressure. Delayed Breakout Confirmation Trades are triggered only after the mismatch occurs and Gold subsequently breaks its recent high or low over a configurable lookback period. This delay avoids chasing impulses and focuses on release after compression. Why This Is Different Unlike traditional trend or correlation indicators, this script does not trade direction directly. Instead, it evaluates effort versus response across two related markets, filtering out low-quality momentum and false breakouts. The strategy focuses on: Cross-asset pressure imbalance Volatility-normalized conditions Sequential confirmation rather than instant signals How to Use Designed primarily for XAUUSD charts Works best on intraday timeframes (5m–15m) Signals are strongest when aligned with higher-timeframe bias Buy and sell signals are plotted directly on candles Optional RR visualization can be enabled for reference Limitations Not predictive; signals are generated after candle close Performance degrades during extremely low-liquidity or news-driven spikes Intended as a decision-support tool, not a standalone trading system
Indicatore Pine Script®
di Madrimov_trade
Liquidity-Weighted RSILW-RSI scales the classic RSI by relative volume to highlight when momentum happens under unusually high participation. Formula: LW-RSI = RSI × (Current Volume / 20-bar Avg Volume) • The 0 → Threshold band marks the “normal” zone. • Values above Threshold indicate an abnormal liquidity/participation regime (not a buy/sell signal by itself). • The orange line is the moving average of LW-RSI itself to show whether participation spikes are persistent or just noise. LW-RSI does not predict direction. Use it as a context/confirmation tool alongside structure, VWAP, and volume profile.
Indicatore Pine Script®
di mdereli5797
SmartVol SuperTrend | OquantOverview The SmartVol SuperTrend is an evolution of the traditional SuperTrend indicator. While the standard SuperTrend uses Average True Range (ATR) to calculate volatility bands, this version utilizes Volume-Weighted Standard Deviation (VWSD). By integrating volume into the volatility calculation, the indicator attempts to filter out "quiet" price movements and reacts more dynamically to price action supported by high trading activity. How It Works The script follows a multi-step process to define trend direction: Smoothing: It applies a 5-period EMA to the source price to reduce minor noise before calculating the bands. Volume-Weighted Volatility: Instead of a simple Standard Deviation, the script uses a custom volume standard deviation function. It measures the dispersion of price around its Volume Weighted Moving Average (VWMA), weighting each price point's contribution by the volume of that bar. Recursive Band Logic: Like the classic SuperTrend, the bands are "locked" in place. The lower band can only move up, and the upper band can only move down, until price closes on the opposite side, triggering a trend flip. Visuals: The script highlights the trend by coloring the candles and the space between the price and the trend line, providing a clear visual of the current market bias. Usefulness By using Volume-Weighted Standard Deviation, this indicator accounts for real market activity. Consequently, it expands its bands more aggressively during high-volume breakouts while dampening its reaction to price moves when volume fades, potentially offering more robust band levels anchored to true market participation. How to Use Trend Identification: When the line is green and below price, the trend is bullish. When the line is purple and above price, the trend is bearish. Factor Adjustment: Increase the Factor (default 1.8) to reduce sensitivity and avoid whipsaws in volatile markets. Decrease it for tighter tracking. EMA Length: Adjust the EMA length to change how much price smoothing is applied before the trend calculation. Note on Signals This indicator is designed for trend-following. Like all lagging indicators, it performs best in trending markets and may produce false signals during sideways consolidation. Settings Source: The price source used for calculations (default: Close). EMA Length: The lookback for the initial price smoothing (default: 5). VWSD Length: The period used to calculate the volume-weighted volatility (default: 30). Factor: The multiplier applied to the VWSD to determine the distance of the bands (default 1.8). ⚠️ Disclaimer: This indicator is intended for educational and informational purposes only. Trading involves risk, and past performance does not guarantee future results. Always test and evaluate indicators/strategies before applying them in live markets. Use at your own risk.
Indicatore Pine Script®
di oquant
2
TX Ultra Zone Consolidation Detector## TX Ultra Zone Consolidation Detector ## Overview TX Ultra Zone is an advanced market structure utility designed to automatically detect periods of consolidation, indecision, and sideways movement. By isolating ranging markets, it helps traders avoid "choppy" conditions and prepare for high-probability breakouts. What It Does Automatic Detection: Draws visual boxes around price action when volatility compresses. Breakout Projection: Once price breaks the box, it projects a "Shadow Zone" forward. This shadow serves as a key reference for Support-becomes-Resistance (or vice versa) retests. Noise Filtering: Helps you stay out of the market when no clear trend exists. How It Works (Conceptual) The script uses a multi-layer detection engine: Regime Detection: It analyzes market efficiency and volatility (using adaptive logic) to determine if the market is trending or ranging. Geometry Confinement: When a range is detected, the script locks the High and Low boundaries. Expansion & Breakout: The box dynamically expands if price pushes the boundary slightly without a true breakout. A valid breakout closes the box and triggers the Shadow Extension. How to Use Add to Chart: Works best on volatility-sensitive assets (Forex, Crypto, Indices). Wait for the Box: When a Purple Box appears, the market is resting. Do not trade trends inside the box. Trade the Breakout: Wait for a candle close outside the box. Use the Shadow: The Grey Shadow Extension indicates where price might return to "retest" the breakout level. This is often a prime entry zone. Settings & Tuning Detection Engine: Switch between Adaptive Volatility (Standard) or Momentum Compression (Alternative). Zone Threshold: 45-50: Sensitive (More boxes, catches micro-ranges). 55-60: Strict (Only catches very clear, tight consolidation). Shadow Extension: Adjust how far into the future the support/resistance zone is projected. Disclaimer This tool is for educational and analytical purposes only. Past performance does not guarantee future results. Always use proper risk management.
Indicatore Pine Script®
di Tonzlnxz
ATR + BJ Signal V3ATR + BJ Signal (Optimized for GOLD) This indicator is designed for mean-reversion scalping on GOLD, focusing on volatility expansion and momentum exhaustion. Key features: ATR-based candle expansion filter to detect abnormal moves RSI overbought / oversold confirmation Optional Bollinger Band deviation filter Clear BUY / SELL signals for reversal entries Automatic SL / TP projection lines and price labels (individually toggleable) Best suited for short-term reversal and scalp trades during high-volatility conditions. All visual components can be enabled or disabled independently. be enabled or disabled independently.
Indicatore Pine Script®
di masato19810122
Smart Money Structure | GainzAlgo📊 OVERVIEW: ================ Smart Money Structure Analysis is a professional-grade market structure and order-flow system designed to identify institutional trading behavior through volatility-adaptive logic, multi-timeframe trend alignment, and volume-based confirmation. This indicator implements original mathematical models to detect Change of Character (CHoCH), Break of Structure (BOS), cumulative volume dynamics, and trend convergence across seven timeframes — delivering high-probability trade signals with significantly reduced noise. Unlike basic indicator combinations, this system functions as a unified trading framework, where volatility adaptation, structure analysis, and volume confirmation continuously reinforce each other to provide precise, context-aware signals. ⭐ WHY THIS SYSTEM IS UNIQUE AND WORTHY OF PUBLICATION: ===================================================== This is not a collection of common indicators placed together. Smart Money Structure Analysis represents a cohesive institutional methodology, engineered so that: - Volatility adjusts signal sensitivity in real time - Multi-timeframe trends define directional bias - Market structure determines timing - Volume confirms institutional participation - Advanced filters eliminate low-quality setups Each component is mathematically linked to the others, creating a workflow that cannot be replicated by stacking separate indicators. 🔗 SYNERGISTIC INTEGRATION – HOW THE SYSTEM WORKS TOGETHER: ========================================================== 🧠 1. CONTEXT-AWARE VOLATILITY ADAPTATION ATR-based volatility logic dynamically adjusts all momentum thresholds: - Higher volatility → stronger confirmation required - Lower volatility → sensitivity increases to capture valid moves This prevents over-signaling in choppy markets and under-signaling during expansion phases — a core flaw in static indicators. 📐 2. MULTI-TIMEFRAME TREND CONVERGENCE ENGINE Seven timeframes are analyzed simultaneously: 1M • 5M • 15M • 30M • 1H • 4H • 1D Each timeframe is scored using EMA + VWAP alignment, producing a composite Trend Strength Score from -100 to +100. The stronger the alignment across timeframes, the higher the probability of continuation — instantly visible through the real-time dashboard. 🏗️ 3. INSTITUTIONAL MARKET STRUCTURE (CHoCH & BOS) The system automatically identifies the two core smart money concepts: - CHoCH (Change of Character): Signals potential trend exhaustion or reversal zones - BOS (Break of Structure): Confirms trend continuation and institutional commitment Structure zones are visualized with persistent, color-coded levels and clouds, providing precise contextual timing rather than lagging signals. 📊 4. CUMULATIVE VOLUME DELTA (CVD) CONFIRMATION CVD tracks the cumulative difference between buying and selling pressure: - Rising CVD → accumulation - Falling CVD → distribution - Divergence vs price → early reversal warning Volume participation is categorized into Low / Medium / High, adding depth beyond simple volume bars. 🛡️ 5. SIX-LAYER PROFESSIONAL SIGNAL FILTERING Every signal must pass through up to six independent confirmation layers: 1. Volatility-adjusted momentum 2. Higher timeframe trend alignment 3. Lower timeframe conflict prevention 4. Institutional volume confirmation 5. Structural breakout validation 6. Repeated-signal restriction This dramatically reduces false positives while preserving only high-quality institutional setups. 🧮 DETAILED CORE SYSTEMS: ======================== 📏 ADAPTIVE MOMENTUM FORMULA - Momentum Threshold = Base × (1 + (ATR ÷ Price) × 2) - Pre-Momentum Factor = Base × (1 − (ATR ÷ Price) × 0.5) 📊 TREND STRENGTH CALCULATION - Trend Strength = (Sum of 7 timeframe scores ÷ 7) × 100 📦 CVD LOGIC - Close > Previous Close → Buy volume added - Close < Previous Close → Sell volume subtracted - Cumulative sum reveals institutional intent 🧠 STRUCTURE DETECTION - Pivot-based swing logic - Candle confirmation - Configurable lookback periods - Non-repainting visualization 🧩 ADVANCED ANALYSIS TOOLS: ========================== 🧲 LIQUIDITY ZONE DETECTION Identifies probable retail stop-loss clusters where institutions often initiate stop hunts before true directional moves. 📦 MARKET PROFILE & ORDER FLOW IMBALANCE Detects buy/sell dominance using volume ratios, highlighting accumulation and distribution zones before large price moves. 🔄 RSI DIVERGENCE SCANNER Identifies bullish and bearish divergences that frequently precede structure shifts and trend reversals. 🎨 VISUAL SYSTEM & DASHBOARD: ============================ 📊 SMART MONEY MATRIX - Composite trend strength - System confidence % - CVD value - Directional grid for all timeframes 📈 TREND PREDICTION MATRIX (Optional) Forecasts short-term directional bias using trend, momentum, and volatility data. 🏷️ SIGNAL LABELS - BUY / SELL → Fully confirmed entries - READY → Momentum building - BOS / CHoCH → Structure events - FLOW / LIQ / BULL / BEAR → Advanced confirmations ⚙️ CORE FEATURES: ================ 1. Multi-Timeframe Trend Convergence 2. Smart Money Structure Detection (CHoCH & BOS) 3. Adaptive Volatility-Based Momentum 4. Cumulative Volume Delta (CVD) 5. Six-Layer Signal Filtering 6. Liquidity Zone Detection 7. Order Flow & Market Profile Analysis 8. Divergence Scanner 9. Dynamic Trendlines 10. Institutional-Grade Dashboard 📘 WHO THIS INDICATOR IS FOR: ============================ - Scalpers: Noise-filtered precision on lower timeframes - Day Traders: High-probability continuation setups - Swing Traders: Multi-timeframe alignment & structure zones - Reversal Traders: Divergence + CHoCH confirmation ⚠️ IMPORTANT DISCLAIMER: ======================== This indicator is a technical analysis and educational tool only. It does not provide financial advice or trade recommendations. Trading involves substantial risk, and losses are a natural part of trading. Past performance does not guarantee future results. All trading decisions remain the sole responsibility of the user.
Indicatore Pine Script®
di GainzAlgo
51
Market Regime: Squeeze Box + Trend DashboardMarket Regime: Squeeze Box + Trend Dashboard Market Regime is a overlay designed to provide instant market context (trend vs consolidation) and highlight volatility compression (squeeze) setups before potential breakouts. Built with stock charts in mind, it focuses on clean visuals and practical decision support. What this indicator shows: 1) Market Regime (TREND / RANGE / NEUTRAL) The regime is detected using DMI/ADX with built-in confirmation to reduce flicker: TREND : ADX stays above a threshold for N bars RANGE : ADX stays below a threshold for N bars NEUTRAL : neither trend nor range is confirmed Trend direction is derived from DI+ vs DI- (UP / DOWN / MIXED). 2) Squeeze (BB inside KC) A squeeze is detected when Bollinger Bands contract inside Keltner Channels (volatility compression). SQZ = squeeze start REL = squeeze release (the first bar *after* squeeze — technically correct) 3) Squeeze Box The core feature: a box drawn from SQZ → REL , dynamically tracking the highest high / lowest low during the squeeze. This creates a clean visual range for the compression zone and helps frame breakout context. 4) EMA Ribbon with ADX-based intensity Two EMAs (fast/slow) form a ribbon. The fill becomes more pronounced as ADX strength increases, making trend momentum easier to read at a glance. 5) Trend Dashboard (corner panel) A compact dashboard summarizing key metrics: REGIME, DIR, ADX (with normalized strength %) SQUEEZE ON/OFF Relative Volume (relVol + tier) ATR% (14), EMA Slope%, GAP% (Open vs previous Close) Customization / Settings Fully configurable for different styles and markets: ADX/DMI lengths and thresholds BB/KC parameters (lengths and multipliers) Relative Volume thresholds Background mode: Off / Squeeze only / All regimes Visual toggles: ribbon, squeeze box, markers, dashboard History controls and limits for boxes/labels (clean chart + performance) How to use (practical workflow) Trend context : read REGIME + DIR and ribbon intensity (ADX strength). Squeeze setup : when squeeze is active, the box defines the compression range (high/low). Release : REL marks the first bar after squeeze ends (potential breakout/expansion context). Notes No look-ahead logic is used; calculations rely on current and historical bars only. On realtime (still-forming) candles, values can change intrabar, normal behavior for indicators computed on the current bar. Trading Disclaimer: This indicator is provided for research and informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. Use at your own risk. You are solely responsible for any trading decisions made using this script.
Indicatore Pine Script®
di scripts57dev
Bar-Close Confirmed SupertrendOverview This indicator is a Supertrend-style trend follower that confirms direction changes only after a bar closes. Trend flips are determined using the previous bar’s close relative to the bands, which helps avoid intrabar changes during live candles. How it works Computes ATR (Average True Range) Builds upper/lower bands using ATR and a multiplier Updates trend direction only when a prior candle confirms a break of the band Confirmation logic (bar-close based) Trend direction is updated using conditions based on the previous candle, such as: close > upper → confirm uptrend close < lower → confirm downtrend Because signals are confirmed on the prior bar, trend changes and markers are displayed only when confirmation exists. Signals Uptrend confirmation: prior candle closes above the upper band → bullish marker Downtrend confirmation: prior candle closes below the lower band → bearish marker Inputs ATR Length (default 10) ATR Multiplier (default 3.0) Notes This script is intended for bar-close workflows. Behavior and responsiveness may differ across markets and timeframes depending on volatility and chosen settings.
Strategia Pine Script®
di AIScripts