VWAP Choppy Market Detector [TradingFinder] Trend Range🔵 Introduction
Markets are not always clean. Sometimes price moves with a clear bullish or bearish direction, sometimes it stays inside a range, and sometimes it keeps shifting back and forth with no reliable structure. This indicator uses VWAP-based bands to make these market conditions easier to read directly on the chart, showing trend, range, and choppy price action through simple visual zones.
In trending markets, the bands remain more stable and highlight the dominant side of the market. Green zones show bullish pressure, while red zones show bearish pressure. When price moves sideways, the indicator marks the range area with purple zones and shows the Range High and Range Low, making the upper and lower limits of the consolidation easier to follow.
The choppy market signal comes from the behavior of the colors themselves. When the chart keeps changing between bullish, bearish, and range states, it reflects unstable price action, frequent market behavior shifts, and chaotic volatility. This makes the indicator useful for reading when the market has a clean direction, when it is trapped inside a range, and when price movement becomes too noisy or uncertain.
🔵 How to Use
Start by looking at the overall color behavior on the chart. The main purpose of this indicator is to show the current market environment through VWAP-based bands, so the first step is not to look for a single signal, but to understand the condition of the market. When the colors stay stable for a longer period, the market is usually showing a clearer structure. When the colors change repeatedly, the market is shifting between different states and price action is becoming less stable.
Green areas show bullish trend conditions. In this state, price is trading with stronger upward pressure and the market is moving with a clearer bullish bias. Traders can use this condition as a trend filter, a continuation filter, or a confirmation tool before looking for long setups with their own strategy. A stable green zone usually means the market is cleaner for bullish trend-following ideas compared to a market where the color keeps changing.
Red areas show bearish trend conditions. In this state, price is trading with stronger downward pressure and the market is moving with a clearer bearish bias. Traders can use this condition to filter short setups, confirm bearish continuation, or avoid taking long trades against the dominant market behavior. When the red zone remains stable, it shows that the bearish side of the market is more consistent.
Purple areas show range market conditions. In this state, price is moving inside a more limited structure instead of trending strongly in one direction. The upper and lower range boundaries can be used to understand where the market is consolidating. The upper boundary works as the Range High, while the lower boundary works as the Range Low. These levels help traders see the current sideways structure more clearly and follow how price reacts inside the range.
In a range market, traders can use the Range High and Range Low as visual reference levels. Price near the upper boundary may show that the market is testing the top of the range, while price near the lower boundary may show that the market is testing the bottom of the range. This can be useful for range analysis, mean-reversion setups, support and resistance reading, and identifying where price is likely to react inside a consolidation area.
Choppy market behavior is read through frequent color changes. When the chart keeps switching between green, red, and purple, it shows that the market does not have a clean direction. This kind of behavior usually means price is unstable, market bias is changing quickly, and volatility is becoming chaotic. Instead of treating these color changes as random noise, they should be read as the main warning sign of a choppy market.
One of the most useful applications of this indicator is avoiding poor trading conditions. Many strategies perform well in clean trends but struggle when the market becomes choppy. If the colors change too often and price fails to hold a stable condition, traders can use that information to reduce exposure, wait for a clearer structure, avoid overtrading, or be more selective with entries.
The indicator can also be used as a trend-following filter. When the market remains green, traders can focus more on bullish setups. When the market remains red, traders can focus more on bearish setups. This does not mean every green area is a buy signal or every red area is a sell signal. It means the market condition is more aligned with that side, and traders can combine it with their own entry model, price action setup, support and resistance level, or risk management plan.
Another use case is range detection. When the indicator marks a purple range, traders can quickly see that price is no longer moving with strong directional pressure. This helps separate trending conditions from sideways conditions. Range detection can be useful for traders who use consolidation breakouts, range trading, mean reversion, liquidity sweeps, or support and resistance reactions.
The indicator can also help with breakout context. Before a breakout, price often spends time inside a range. By watching the Range High and Range Low, traders can better understand where the range is forming and where a breakout attempt is happening. If price leaves the purple range and the market shifts into a stable green or red condition, traders can use that as extra context that the market behavior has changed from consolidation to directional movement.
For choppy market analysis, the most important thing is the speed and frequency of the color changes. A few normal changes can happen during transitions, but repeated switching shows that the market is unstable. This can help traders recognize fake breakouts, messy pullbacks, weak trend conditions, and periods where price does not respect a clean structure.
The timeframe setting controls the VWAP anchor period. Daily mode is more suitable for short-term and intraday analysis. Weekly mode gives a broader view of the current week’s VWAP structure. Monthly mode provides a higher-timeframe view and can be useful for swing trading or larger market context. Traders can choose the anchor timeframe based on the way they trade and the amount of market structure they want to see.
The Band Multiplier controls the width of the main VWAP bands. A wider band gives a broader market structure, while a smaller band keeps the bands closer to price. This setting affects how the trend and volatility structure is displayed on the chart. Traders can use it to match the indicator with different symbols, sessions, and volatility conditions.
The Range Multiplier controls the sensitivity of the range detector. A lower value makes the range detection more sensitive, so range areas may appear more actively. A higher value makes the range detection more conservative, so the indicator becomes more selective when marking range conditions. This setting is useful because different markets do not move the same way; some symbols are naturally smoother, while others are more volatile and noisy.
The VWAP line can be shown or hidden depending on the trader’s preference. When enabled, it gives a direct view of the VWAP reference line inside the band structure. Some traders may use it as a central fair-value reference, while others may prefer to keep the chart cleaner and focus only on the colored bands and market regime zones.
This indicator can be used by scalpers, intraday traders, swing traders, and market structure traders. Scalpers may use it to avoid fast choppy conditions and focus on cleaner short-term movement. Intraday traders can use it to read the daily or weekly VWAP structure. Swing traders can use weekly or monthly mode to understand broader market behavior. Price action traders can use it as a visual filter for trend, range, and unstable market conditions.
The best way to use the indicator is as a market condition tool, not as a standalone entry system. Its main value is helping traders understand when the market is trending, when it is ranging, and when price action is too choppy to read clearly. Once the market condition is clear, traders can apply their own strategy with better context.
🔵 Settings
TimeFrame : This setting defines the VWAP anchor period used by the indicator. Traders can choose between Daily, Weekly, and Monthly modes. Daily mode follows the current day’s VWAP structure, Weekly mode uses the current week’s VWAP structure, and Monthly mode shows a broader VWAP structure based on the current month.
Band Multiplier : The Band Multiplier controls the width of the main VWAP bands. A higher value makes the bands wider and gives more space around price, while a lower value keeps the bands closer to price. This setting affects how the indicator displays the main trend and volatility structure.
Range Multiplier : The Range Multiplier controls the sensitivity of the range detector. Lower values create High Range Sensitivity, so the indicator detects range conditions more actively. Higher values create Low Range Sensitivity, making range detection more selective and conservative.
Show VWAP Line : This option shows or hides the VWAP line on the chart. When enabled, the VWAP line can be used as the central reference inside the band structure. When disabled, the chart stays cleaner and the focus remains on the colored market condition zones.
🔵 Conclusion
Market conditions can change quickly, and not every move has the same quality. A clean trend, a structured range, and a choppy market need to be read differently. This indicator helps make that difference more visible by using VWAP-based bands and color behavior to show when price is moving with direction, when it is consolidating, and when the market is becoming unstable.
The main strength of the tool is its visual reading of market behavior. Stable green or red zones make trending conditions easier to follow, while purple zones highlight range structures with clear upper and lower boundaries. When the colors start changing frequently, that shift itself becomes an important warning that price action is noisy, unstable, and moving without a clean direction.
Overall, the indicator gives traders a clearer way to read trend, range, and choppy market conditions before making trading decisions. It is best used as a market environment filter, helping traders understand the current price behavior and decide whether the market is clean enough for their strategy or too chaotic to trade confidently.
Indicatore
Dynamic Trend Bands & Anchored VWAP Signals [BigBeluga]Dynamic Trend Bands & Anchored VWAP Signals is an institutional-grade market structure toolkit built for TradingView. It blends smooth mathematical trend mapping with real-time volume calculations to identify key market turning points and trade breakout momentum.
Instead of displaying standard lag-heavy moving averages, this system locks onto real-time volatility boundaries and anchors Volume Weighted Average Price (VWAP) paths to major swing pivots. It tells you exactly who controls the market—buyers or sellers—and tracks the net volume driving every single expansion phase.
🔵 MAIN ENGINE & MARKET CALCULATION MECHANICS
1. Dynamic Volatility Envelope Framework
Smoothed Base Filter: The indicator runs a double-smoothed exponential moving average engine ( Baseline Length ) to find the true structural baseline of the asset.
ATR Volatility Channels: It projects dynamic outer bands based on market volatility over a set period ( ATR Volatility Length ). The width adjusts automatically using your preference ( ATR Band Multiplier ) to trap standard price fluctuations and highlight true volatility expansion zones.
Trend Flip Architecture: A definitive close above the upper band switches the system to a Bullish Regime, while a close below the lower band forces a Bearish Regime.
2. Pivot-Anchored VWAP Matrix
Structural Anchor Selection: The engine scans your chart using your lookback criteria ( Pivot Point Detection Length ) to pinpoint major structural market highs and lows.
Live VWAP Projections: The moment a trend flip occurs and a pivot is confirmed, the script constructs a dynamic, non-repainting polyline tracking the Volume Weighted Average Price (VWAP) directly from that structural anchor point.
Delta Volume Accumulation Engine: As price moves along the anchored line, a real-time looping counter sums up the true buy and sell volume to calculate Delta Volume (buying volume minus selling volume).
// Pivot-Anchored VWAP Delta Volume Accumulation Loop Snippet
for i = 0 to bar_index - highIndex - 1
cp1.push(chart.point.from_index(bar_index - i, vwap1 ))
loopDeltaVolHigh := loopDeltaVolHigh + (close > open ? volume : -volume )
poly1 := polyline.new(cp1, line_color = bullColor, line_style = line.style_dotted, line_width = 2)
🔵 WHY IT IS USEFUL
Exposes Institutional Commitments: Standard indicators show where price has been. This engine anchors to major structural pivots and factors in volume data to show you exactly where big institutional players are positioning their capital.
Provides Instant Market Context: The floating real-time dashboard reveals the macro trend status and the exact volume backing the latest market cycle at a glance, allowing you to instantly align your bias with the dominant force.
Quantifies Breakout Authenticity: When price breaches the anchored VWAP baseline, the indicator immediately calculates the net Delta Volume. This tells you if a breakout is backed by aggressive institutional participation or if it is just a low-volume trap.
🔵 HOW TO USE THE SYSTEM
Trading Bullish Breakouts: During an active uptrend, watch for price to pull back toward the lower volatility support bands or consolidation zones. Look for price to break sharply back up through the anchored VWAP baseline line. When a green breakout triangle ( ▲ ) appears, check the Delta Volume text label to verify aggressive buying pressure before entering.
Trading Bearish Breakdowns: When the macro regime shifts to bearish, monitor rallies into the upper resistance bands. Wait for price to cross down through the bearish anchored VWAP baseline. A purple breakdown triangle ( ▼ ) signals a high-probability short opportunity backed by aggressive selling volume.
Managing Risk and Invalidations: Use the outer volatility bands as dynamic structural backstops. For long positions, place your defensive stop loss just below the lower dotted line boundary; for short positions, manage risk right above the upper dotted line boundary.
Master institutional volume cycles and track true structural momentum using the Dynamic Trend Bands & Anchored VWAP Signals workspace. Indicatore
Trend Market by erdensedatThis indicator ("Trend Market") is a highly comprehensive trading system that brings together modern Smart Money Concepts (SMC), Price Action analysis, and dynamic trend structures under one roof. Breaking away from the lagging nature of traditional indicators, it focuses entirely on the real-time market structure dictated by price itself.
Here are the core features of the indicator and what they mean for your trading:
1. Market Structure (MS) Breakouts
The indicator instantly detects shifts in market structure. When price breaks through previous lower highs or higher lows, it labels them as BOS (Break of Structure) to indicate trend continuation, or CHoCH (Change of Character) at points where the trend changes direction. These breakouts are the most fundamental Price Action components for understanding where the price wants to go.
2. Order Blocks and High-Probability Entries (Re-Tests)
When a BOS or CHoCH occurs, the indicator automatically draws "Order Block" zones, which highlight where the institutional volume that initiated the breakout is concentrated.
Why it matters: Order Blocks (OB) are areas where "smart money" enters the market with large volume. After these breakouts, price often retraces (re-tests) these zones to grab liquidity. Entering a trade when a trend-aligned Order Block is tested provides the highest risk-to-reward (R/R) ratio and the most robust, reliable entry opportunities (sniper entries).
3. FVG (Fair Value Gaps)
The indicator detects FVGs, which represent imbalances in the market.
Why it matters: FVGs occur during rapid, high-volume price movements when there is an imbalance between buyers and sellers. FVGs formed at the beginning of a new trend (especially alongside a CHoCH) confirm the strength of that trend. FVGs formed while a trend is ongoing act as magnets for the price during pullbacks, serving as potential support/resistance and target areas.
4. Ghost Trend Engine
Unlike traditional static trendlines, this feature calculates the slopes of price wicks to generate dynamic trendlines that adapt to the market's momentum. It draws both Minor (Ghost) and Major (Confirm) resistance and support slopes.
The Confirmation Mechanism: If price bounces off one of these dynamic Ghost/Confirm trendlines during an Order Block re-test or an FVG fill, your entry signal becomes "double confirmed." Furthermore, when these trendlines are broken, they serve as early warning signs of an impending trend reversal.
5. Dynamic TP (Take Profit) Machine (Infinite Fibonacci)
It plots automatic Fibonacci extension levels calculated from your entry point (CHoCH/BOS) and the peak/trough of the current structure.
How it works: As price hits these targets (TP1, TP2, etc.), the indicator automatically extends the targets higher/lower, creating an infinite sequence of Take Profit levels. No matter how far a trend extends, your potential target levels will always be ready on your chart.
Summary: How to Trade with It?
Determine the market direction using the CHoCH and BOS labels.
Don't rush in immediately after a breakout; wait for the price to retrace (Re-test) into the Order Block (OB) or FVG zones.
When price reaches these zones, observe the reaction from the Ghost Trend lines to confirm that the trend will continue.
Once you enter a trade, use the automatically generated Dynamic TP levels for scaled profit-taking.
Disclaimer
This indicator is designed for educational, analytical, and informational purposes only. The signals, labels, or support/resistance zones provided do not constitute financial or investment advice. Trading cryptocurrencies, stocks, and forex involves a high degree of risk and can result in the loss of your entire capital. All trades taken using this indicator are strictly at your own risk and responsibility. Please ensure you apply your own risk management and trading plan. Indicatore
Anchored VWAP Pro#Anchored VWAP Pro
by: MasterTonyTA
## What it does
VERY SIMPLE MARK TOPS MARK BOTTOMS- SUPPORT AND RESISTANCE SHOWN
ANCHORED VWAP SHOWS YOU IMPORTANT LEVELS TO KEEP AN EYE TO FLIP, REJECT, OR HOLD
Two anchored VWAPs (top and bottom) with **color memory** — each line stays colored while holding as S/R, turns gray when broken — plus **real-time triangles** marking every wick rejection at the top and bounce at the bottom. Anchors can be set manually via the date/time input in settings, or dragged directly on the chart for fast experimentation.
---
## How it's calculated
**VWAP** (close-based, cumulative from anchor):
```
VWAP = Σ(close × volume) / Σ(volume)
```
Starts at the user-selected anchor bar and accumulates forward.
**Color logic:**
- **Top VWAP** — red while `close < VWAP` (resistance holding), gray when `close > VWAP` (broken)
- **Bottom VWAP** — green while `close > VWAP` (support holding), gray when `close < VWAP` (broken)
**Triangles** (wick-based, fires same bar):
- **🔻 Top Rejection** — `high ≥ Top VWAP` and `close < Top VWAP`
- **🔺 Bottom Bounce** — `low ≤ Bottom VWAP` and `close > Bottom VWAP`
---
## How to trade with it
1. **Anchor the top** to a major swing high — the red line is dynamic resistance from that pivot.
2. **Anchor the bottom** to a major swing low — the green line is dynamic support from that pivot.
3. **Read the state:**
- Red top + green bottom = price inside a dynamic channel, fade the edges
- Top turns gray = resistance broken, look for retest as new support
- Bottom turns gray = support broken, look for retest as new resistance
4. **Trade the triangles:**
- 🔻 = short the rejection, stop above the wick
- 🔺 = long the bounce, stop below the wick
Best anchors are pivots that already matter — major highs, major lows, capitulation candles. Drag the anchor to test different points; the right one is where price clearly respects the line.
---
Indicatore
Smooths VWAP SuiteTitle: Smooth's VWAP Suite: Advanced Futures Context & Filtered Signals
Description:
Overview & Purpose
Smooth's VWAP Suite is a comprehensive volume-weighted average price toolkit engineered specifically for futures traders (e.g., NQ, ES).
The primary justification for combining these specific elements—Daily VWAP, Standard Deviation Bands, Session AVWAPs (Overnight, RTH, Weekly), and dynamic signals—into a single script is to solve the problem of "context fragmentation." Futures markets respect multiple volume anchors simultaneously. Rather than cluttering a chart with five individual, unlinked indicators, this suite unites micro (intraday) and macro (weekly) volume levels into one cohesive map. Furthermore, it introduces a custom "Current Day Only" filter mathematically anchored to the 18:00 EST futures open, fixing the common issue where standard indicators rely on the midnight calendar-day rollover.
How It Works: Underlying Concepts & Logic
This script calculates the Volume-Weighted Average Price by maintaining a cumulative running total of Price × Volume, divided by Total Volume.
Session AVWAPs & Previous Day: The script calculates distinct VWAPs based on specific time anchors. It automatically tracks the Weekly open, the Regular Trading Hours (RTH) open, and the Overnight (OVN) session. It also statically plots the Previous Day's closing VWAP value, acting as a critical pivot for the current session.
Standard Deviation Variance: The bands surrounding the Daily VWAP are calculated using the mathematical square root of volume-weighted variance. This provides dynamic, mathematically sound support and resistance zones based on current market volatility, plotted at user-defined multipliers (defaulting to 1.0, 2.0, and 3.0 SD).
Signal Engine & EMA Filter: The built-in signals are not basic crossovers. To prevent false signals in chopping ranging markets, the script requires an EMA (Exponential Moving Average) directional filter to confirm the trend.
Reversal/Cross Signals: Trigger when price straddles the VWAP, closes on the opposite side, is aligned with the EMA slope, and is positioned correctly relative to the Weekly VWAP.
Continuation Signals: Trigger when price pushes into a Standard Deviation band (e.g., SD 1 or SD 2) and actively rejects it, closing back toward the trend direction while maintaining the EMA slope.
How Traders Can Use It
This suite is designed for trend identification, mean-reversion targeting, and precise entry confirmation.
Macro Context Alignment: Use the Weekly and Previous Day VWAP lines to determine the broader bias. If the current Daily VWAP is trading above both, the macro trend is bullish.
Mean Reversion: When price extends into the SD 2 or SD 3 bands, the asset is statistically overextended based on current volume. Traders can look for price action weakness at these extremes to target a reversion back to the Daily VWAP (the mean).
Signal Execution: Utilize the script's visual markers (Arrows/Triangles) for entry confirmations. A bullish signal firing after a bounce off the lower SD 1 band, while the Daily VWAP remains above the Weekly VWAP, offers a high-probability continuation setup.
Chart Decluttering: For active day traders, toggle the "Current Day Only" setting. This utilizes custom logic to sever all historical visual data prior to the exact 18:00 EST futures anchor, keeping your screen entirely focused on the current session's price action.
Customization
Every element is modular. Traders can toggle specific bands, adjust standard deviation multipliers, change the EMA filter length for signals, and customize the visual offsets of the price labels to fit their specific screen layout. Indicatore
VWAP Auto Anchored TrendVWAP Auto Anchored Trend
This indicator is a Pine Script v6 recreation of an auto-anchored VWAP tool with an added trend and flatness readout. It is designed to help you study how volume-weighted price develops from a selected anchor and how stable or directional that VWAP remains over time.
What It Does
At its core, this script calculates a Volume Weighted Average Price (VWAP) . Unlike a simple moving average, VWAP gives more influence to bars with higher volume. That allows it to reflect where trading activity has been concentrated during the active anchor period.
The line begins at the selected anchor and updates forward from there, giving you a focused view of how price and volume have behaved from that point.
Anchor Periods
The script supports multiple anchor types, including:
Auto
Highest High
Lowest Low
Highest Volume
Session
Week
Month
Quarter
Year
Decade
Century
Earnings
Dividends
Splits
For time-based anchors such as Month , Quarter , or Year , the indicator displays only the currently active anchor period. That keeps the chart focused on the most recent cycle rather than extending the VWAP through the entire chart history.
Source and Calculation
The VWAP can be calculated from a selectable source, such as hlc3 , which is commonly used as a balanced price basis. The script accumulates price multiplied by volume, then divides that running total by cumulative volume over the active anchor period.
This makes the line responsive not only to price movement, but to how much trading participation occurred at those prices.
Bands and Visual Structure
The script includes optional upper and lower VWAP bands. These bands can be calculated using:
Standard Deviation
Percentage
Up to three band levels can be enabled, each with its own multiplier. When active, they can help frame how tightly or loosely price is trading around the anchored VWAP.
A background fill can also be used between the outer visible bands to make the VWAP zone easier to read visually.
Offset Support
An offset setting is included so the VWAP and its bands can be shifted visually on the chart. This affects display placement only and does not change the underlying VWAP calculation.
VWAP Flatness and Trend Readout
One of the main additions in this version is the VWAP Flatness section.
Instead of only judging the VWAP slope by eye, the script measures how much the VWAP has drifted from its anchor to the current bar. It then normalizes that drift using ATR to produce a more comparable trend/flatness reading.
The table compares two views:
All Period - the entire active anchor period
Last 50% - the most recent half of that same period
This can help show whether the VWAP has remained balanced over the full anchor period, or whether the more recent portion has started to trend more clearly.
Table Readout Includes
VWAP State - VERY FLAT, FLAT, MODERATE, TRENDING, or STRONG TREND
ATR Score - VWAP drift measured against ATR
Drift % - total percentage drift in VWAP over the measured section
Per Bar % - average drift per bar over that section
This is intended as a structured way to describe VWAP behavior. It does not predict future price movement, but it can help organize how stable or directional the VWAP has been within the chosen anchor window.
How It May Be Used
This indicator can be used as a reference for:
Tracking where volume-weighted price has developed from an anchor
Comparing current price to anchored average value
Observing whether price is staying near VWAP or expanding away from it
Viewing optional VWAP band structure
Comparing overall VWAP behavior with the most recent half of the anchor period
Notes
This script is intended as a charting and analysis tool.
The flatness and trend labels describe measured VWAP behavior, not guarantees.
Different symbols, timeframes, and anchor periods can produce very different readings.
Summary
This script combines anchored VWAP logic, optional bands, and a two-part flatness/trend readout into one tool. Its goal is to help you study where weighted price has developed, how price is behaving around that value, and whether the VWAP itself has remained relatively flat or become more directional over the active anchor period.
Indicatore
Daily + Anchored VWAP**Daily VWAP + Anchored VWAP (RTH / Full Session Toggle)**
This script provides a clean and reliable implementation of Daily VWAP along with an Anchored VWAP, designed to behave consistently across different session types and chart settings.
The Daily VWAP automatically resets each day based on the selected mode. In RTH mode, it resets on the first regular-session bar and only includes regular trading hours. In Full Session mode, it resets on the first bar of the day and includes all available price data. The calculation uses a proper cumulative price × volume divided by volume approach, ensuring accuracy with no gaps or delayed starts on the opening candle.
The script includes a historical display control that allows switching between showing only the current trading day or displaying a configurable number of previous trading days. The “today only” mode is handled using chart-based date detection, which avoids the common issues seen in other VWAP scripts where the first bars of the session are incorrectly excluded.
An Anchored VWAP is also included, which starts from the first session bar of a user-defined number of trading days back and accumulates forward to the present. This anchored VWAP operates independently from the daily VWAP visibility settings and remains stable regardless of whether historical display is enabled or not.
A session toggle allows switching between RTH-only behavior and full-session behavior. This setting applies consistently to both the Daily VWAP and Anchored VWAP, making it easy to compare how price interacts with VWAP under different session definitions.
This script is designed to avoid common VWAP issues such as incorrect start points, broken “today only” filtering, and inconsistent handling of extended hours. The logic separates reset conditions, accumulation, and display filtering to ensure stable and predictable output.
This tool is useful for intraday trading, tracking institutional positioning, anchoring VWAP to recent sessions, and analyzing price behavior across different session types.
Anchored VWAP requires sufficient historical data on the chart to include the selected anchor start point. Behavior may vary slightly depending on the symbol’s session definition and chart settings.
Built for precision and reliability, with a focus on correct behavior in real trading conditions.
Indicatore
Indicatore
ZenAlgo - LevelsThis script combines multiple anchored Volume-Weighted Average Price (VWAP) calculations into a single tool, providing a continuous record of past VWAP levels and highlighting when price has tested them. Typically, VWAP indicators show only the current VWAP for a single anchor period, requiring you to either keep re-anchoring manually or juggle multiple instances of different VWAP tools for each timeframe. By contrast, this script automatically tracks both the ongoing VWAP and previously completed VWAP values, along with real-time detection of “tests” (when price crosses a particular VWAP level). It’s especially valuable for traders who want to see how price has interacted with VWAP over several sessions, weeks, or months—without switching between separate indicators or manually setting anchors.
Below is a comprehensive explanation of each component, why multiple VWAP lines working together can be more informative than a single line, and how to adjust the script for various markets and trading styles:
Primary VWAP vs. Historical VWAP Lines - Standard VWAP indicators typically focus on the current line only. This script also calculates a primary VWAP, but it “locks in” each completed VWAP value when a new time anchor is detected (e.g., new weekly bar, new monthly bar, new session). As a result, you retain an ongoing history of VWAP lines for every completed anchored period. This is more powerful than manually setting up multiple VWAP tools—one for each desired timeframe—because everything is handled in a single script. You avoid chart clutter and the risk of forgetting to reset your manual VWAP at the correct bar.
Why Combine Multiple Anchored VWAP Lines in One Script? - Viewing several anchored VWAP lines together offers synergy . You see not only the current VWAP but also previous ones from different sessions or months, all within the same chart pane. This synergy becomes apparent if multiple historical VWAP lines cluster near the same price level, indicating a potentially significant zone of volume-based support or resistance. Handling this manually would involve repeatedly setting separate VWAP indicators, each reset at specific points, which is time-consuming and prone to error. In this script, the process is automated: as soon as the anchor changes, a completed VWAP line is stored so you can observe how price eventually reacts to it, repeatedly or not at all.
Automated “Test” Detection - Once a historical VWAP line is set, the script tracks when price crosses it in subsequent bars. If the high and low of a bar span that line, the script marks it in red (both the line and its label). It also keeps a counter of how many times each line has been tested. This method goes beyond a simple visual approach by quantifying the retests. Because all these lines are created and managed in one place, you don’t have to manually label the lines or check them one by one.
Advantages Over Manually Setting Multiple VWAPs
You save screen space: Instead of layering several VWAP indicators, each with unique settings, this single script plots them all on one overlay.
Automation: When a new anchor period begins, the script “closes out” the old VWAP and starts a new one. You never need to remember to reset it manually.
Retest Visualization: The script not only draws each line but also changes color and updates the label automatically if a line gets tested. Doing this by hand would be labor-intensive.
Unified Parameters: All settings (e.g., array size, max distance, test count limit) apply uniformly. You can manage them from one place, instead of configuring multiple separate tools.
Extended Insight with Multiple VWAP Lines
Since VWAP reflects the volume-weighted average price for each chosen period, historical lines can show zones where the market had a fair-value consensus in previous intervals. When the script preserves these lines, you see potential support/resistance areas more distinctly. If, for instance, price continually pivots around an old VWAP line, that may reveal a strong volume-based level. With several older VWAP lines on the chart, you gain an immediate sense of where these volume-derived averages have appeared and how price reacted over time. This wider perspective often proves more revealing than a single “current” VWAP line that does not reflect previous anchor sessions.
Handling of Illiquid Markets and Volume Limitations
VWAP is inherently tied to volume data, so its reliability decreases if volume reporting is missing or if the asset trades with very low liquidity. In such cases, a single large trade might momentarily skew the VWAP, resulting in “false” test signals when the high/low range intersects an abnormal price swing. If you suspect the data is incomplete or the market is unusually thin, it’s wise to confirm the validity of these VWAP lines before using them for any decision-making. Additionally, unusual market conditions—like after-hours trading or sudden high-volatility events—may cause VWAP to shift quickly, setting up multiple lines in a short time.
Key User-Configurable Settings
Hide VWAP on Day timeframe and above : Lets you disable the primary VWAP plot on daily or higher timeframes for a cleaner view.
Anchor Period : Select from Session, Week, Month, Quarter, Year, Decade or Century. Controls how frequently the script resets and preserves the VWAP line.
Offset : Moves the current VWAP line by a specified number of bars if you need a shifted perspective.
Max Array Size : Caps how many past VWAP lines the script will remember. Prevents clutter if you’re charting very long histories.
Max Distance : Defines how far back (in bar index units) a line is kept. If a line’s start bar is older than this threshold, it’s removed, keeping the chart uncluttered.
Max Red Labels : Limits the number of tested (red) VWAP lines that appear. If price tests a large number of old lines, only the newest red labels remain once you hit the set limit.
Workflow Overview
As soon as a new anchor period begins (e.g., a new weekly candle if “Week” is chosen), the script ends the current VWAP and stores that final value in its internal arrays.
It creates a dotted line and label representing the completed VWAP, and keeps track of whether it has been tested or not.
Subsequent bars may then cross that line. If a bar’s high/low includes the line’s value, it’s flagged as tested, labeled red, and a test counter increases.
As new anchored periods come, old lines remain visible—unless they fall outside your maxDistance or you exceed the maximum stored line count.
Real-World Benefits
Combining multiple VWAP lines—ranging, for example, from session-based lines for intraday perspectives to monthly or quarterly lines for broader context—provides a layered view of the volume-based fair price. This can help you quickly spot zones where price repeatedly intersects old VWAPs, potentially highlighting where bulls or bears took action historically. Because this script automates the management of all these lines and flags their retests, it removes a great deal of repetitive manual work that would typically accompany multiple, separate VWAP indicators set to different anchors.
Limitations & Practical Use
As with any volume-related tool, the script depends on reliable volume data. Assets trading on smaller venues or during illiquid periods may produce spurious signals. The script does not signal buy or sell decisions; rather, it helps visually map out where volume-weighted averages from previous periods might still be relevant to market behavior. Always combine the insight from these historical VWAP lines with your existing analytical approach or other technical and fundamental tools you use.
Conclusion
This script unifies past and present VWAP lines into one overlay, automatically detecting new anchor resets, storing the final VWAP values, and indicating whenever old lines are retested by price. It offers synergy through the simultaneous display of multiple historical VWAP lines, making it quicker and easier to detect potential support/resistance zones and better reflect changing market volumes over time. You no longer need to manually create, configure, or reset multiple VWAP indicators. Instead, the script handles all aspects of line creation, retest detection, and clutter management, giving you a robust framework to observe how historical VWAP data aligns with current price action.
By understanding the significance of multiple anchored VWAP lines, you can assess market structure from multiple angles in a single view. As always, ensure you confirm the reliability of the volume data for your particular asset and use these lines in conjunction with other analyses to form a well-rounded perspective on current market behavior. Indicatore
VWAP Fibonacci Bands (Zeiierman)█ Overview
The VWAP Fibonacci Bands is a sophisticated yet user-friendly indicator designed to assist traders in visualizing market trends, volatility, and potential support/resistance levels. Developed by Zeiierman, this tool integrates the MIDAS (Market Interpretation Data Analysis System) methodology with Standard Deviation Bands and user-defined Fibonacci levels to provide a comprehensive market analysis framework.
This indicator is built for traders who want a dynamic and customizable approach to understanding market movements, offering features that adapt to varying market conditions. Whether you're a scalper, swing trader, or long-term investor.
█ How It Works
⚪ Anchor Point System
The indicator begins its calculations based on an anchor point, which can be set to:
A specific date for historical analysis or alignment with significant market events.
A timeframe-based reset, dynamically restarting calculations at the beginning of each selected period (e.g., daily, weekly, or monthly).
This dual-anchor method ensures flexibility, allowing the indicator to align with various trading strategies.
⚪ MIDAS Calculation
The MIDAS calculation is central to this indicator. It uses cumulative price and volume data to compute a volume-weighted average price (VWAP), offering a trendline that reflects the true value weighted by trading activity.
⚪ Standard Deviation Bands
The upper and lower bands are calculated using the standard deviation of price movements around the MIDAS line.
⚪ Fibonacci Levels
User-defined Fibonacci ratios are used to plot additional support and resistance levels between the bands. These levels provide visual cues for potential price reversals or trend continuations.
█ How to Use
⚪ Trend Identification
Uptrend: The price remains above the MIDAS line.
Downtrend: The price stays below the MIDAS line and aligns with the lower bands.
⚪ Support and Resistance
The upper and lower bands act as support and resistance levels.
Fibonacci levels provide intermediate zones for potential price reversals.
⚪ Volatility Analysis
Wider bands indicate periods of high volatility.
Narrower bands suggest low-volatility conditions, often preceding breakouts.
⚪ Overbought/Oversold Conditions
Look for the price beyond the upper or lower bands to identify extreme conditions.
█ Settings
Set Anchor Method
Anchor Method: Choose between Timeframe or Date to define the starting point of calculations.
Anchor Timeframe: For Timeframe mode, specify the interval (e.g., Daily, Weekly).
Anchor Date: For Date mode, set the exact starting date for historical alignment.
Set Std Dev Multiplier
Controls the width of the bands:
Higher values widen the bands, filtering out minor fluctuations.
Lower values tighten the bands for more responsive analysis.
Set Fibonacci Levels
Define custom Fibonacci ratios (e.g., 0.236, 0.382) to plot intermediate levels between the bands.
█ Tips for Fine-Tuning
⚪ For Trend Trading:
Use higher Std Dev Multipliers to focus on long-term trends and avoid noise. Adjust Anchor Timeframe to Weekly or Monthly for broader trend analysis.
⚪ For Reversal Trading:
Tighten the bands with a lower Std Dev Multiplier.
Use shorter anchor timeframes for intraday reversals (e.g., Hourly).
⚪ For Volatile Markets:
Increase the Std Dev Multiplier to accommodate wider price swings.
⚪ For Quiet Markets:
Decrease the Std Dev Multiplier to highlight smaller fluctuations.
-----------------
Disclaimer
The information contained in my Scripts/Indicators/Ideas/Algos/Systems does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
My Scripts/Indicators/Ideas/Algos/Systems are only for educational purposes! Indicatore
VWAP with Trend Alerts [CrossTrade]The VWAP with Trend Alerts indicator is designed to provide a comprehensive visual and analytical tool for traders using the Volume Weighted Average Price (VWAP) along with additional features like custom bar coloring and trend-based signal alerts.
Key Components and Functionalities:
1. VWAP Calculation: The core of this indicator is the VWAP, which represents the average price of an asset, weighted by volume. It's a popular tool among traders to identify the general direction and strength of a trend, and for assessing entry and exit points.
2. Standard Deviation Bands: Surrounding the VWAP are multiple bands calculated based on standard deviation values. These bands serve as dynamic support and resistance levels. The script allows up to three bands, each with customizable multipliers, giving insights into price volatility and potential breakout or reversal points.
3. Bar Coloring Options:
- Color All Bars: When enabled, all bars on the chart are colored based on whether they close above (green) or below (red) the VWAP.
- Trend Bars Only: This option, when selected, colors only the bars that close beyond the second standard deviation band. It helps in identifying stronger trends and significant market movements.
4. Buy and Sell Signal Conditions: The script includes conditions for buy and sell signals specifically tailored for trend bars. A buy signal is generated when a bar closes above both the VWAP and the upper second standard deviation band, indicating a potential strong uptrend. Conversely, a sell signal is triggered when a bar closes below both the VWAP and the lower second standard deviation band, suggesting a strong downtrend.
5. Alert Conditions: To aid in timely decision-making, the script features alert conditions corresponding to the buy and sell signals.
Usage and Application:
- For Trend Identification: The VWAP and its bands can help identify the prevailing market trend. Bars closing consistently above the VWAP suggest an uptrend, while those closing below indicate a downtrend.
- Volatility Assessment: The standard deviation bands provide a visual representation of market volatility. Narrower bands suggest low volatility, while wider bands indicate high volatility.
- Signal Alerts for Trading: The buy and sell signals, especially those filtered by the trend bars condition, can be valuable for traders looking for strong movement confirmations.
Flexibility and Customization:
This indicator is highly customizable and builds off of the core logic found in standard VWAP indicators. By allowing traders to adjust the standard deviation multipliers and choose their preferred bar coloring strategy. It caters to various trading styles, whether focusing on the broader market trend or pinpointing significant trend-based movements. Indicatore
Session VWAPS [QuantVue]The Session VWAPS indicator is a designed for traders to enhance their trading analysis by incorporating Volume Weighted Average Price (VWAP) anchored to custom-defined trading sessions.
This indicator automatically plots VWAPs at three critical points of a user defined session:
🔹session start
🔹session high
🔹session low
Additionally, it provides the option to display the VWAPs from previous sessions, offering a look at potential areas of support and resistance.
Anchored VWAP, or Anchored Volume-Weighted Average Price, is a technical analysis tool used to determine the average price of a stock weighted by volume, starting from a specific point in time chosen by the analyst.
Unlike traditional VWAP, which starts at the beginning of the trading session, the anchored VWAP allows traders to select any point on the chart, such as a significant event, price low, high, or a breakout, to begin the calculation.
VWAP incorporates price and volume in a weighted average and can be used to identify areas of support and resistance on the chart.
Indicator Features:
Custom Session Definition:
Users can define their own trading sessions by specifying start and end times, allowing for tailored analysis according to individual trading strategies or market hours.
Anchored VWAP at Three Key Points:
🔹Session Start VWAP: This VWAP is anchored at the start of the defined session.
🔹Session High VWAP: Anchored at the highest price point within the session.
🔹Session Low VWAP: Anchored at the lowest price point within the session.
Previous Session VWAPs:
The indicator can display VWAPs from the previous session, allowing traders to spot potential areas of support and resistance.
Give this indicator a BOOST and COMMENT your thoughts below!
We hope you enjoy.
Cheers! Indicatore
Consolidation VWAP's [QuantVue]Introducing the Consolidation VWAP's Indicator , a powerful tool designed to identify consolidation periods in stock advance and automatically anchor three distinct VWAPs to key points within the consolidation.
Consolidation Period Identification:
The indicator automatically detects periods of consolidation or areas on the chart where a stock's price moves sideways within a defined range. This period can be seen as the market taking a "breather" as it digests the previous gains. Consolidations are important because they often act as a base for the next move, either continuing the previous uptrend or reversing direction.
Consolidation requirements can be customized by the user to match your instrument and timeframe.
Maximum Consolidation Depth
Minimum Consolidation Length
Maximum Consolidation Length
Prior Uptrend Amount
Anchored VWAP, or Anchored Volume-Weighted Average Price, is a technical analysis tool used to determine the average price of a stock weighted by volume, starting from a specific point in time chosen by the analyst.
Unlike traditional VWAP, which starts at the beginning of the trading session, the anchored VWAP allows traders to select any point on the chart, such as a significant event, price low, high, or a breakout, to begin the calculation.
VWAP incorporates price and volume in a weighted average and can be used to identify areas of support and resistance on the chart.
VWAP Anchored to Consolidation High: This VWAP is anchored at the highest price point within the identified consolidation period. It helps traders understand the
average price paid by buyers who entered at the peak of the consolidation.
VWAP Anchored to Consolidation Low: This VWAP is anchored at the lowest price point within the consolidation. It provides insights into the average price paid by
buyers who entered at the lowest point of the consolidation.
VWAP Anchored to Highest Volume in the Consolidation: This VWAP is anchored at the price level with the highest trading volume during the consolidation. It reflects the average price at
which the most trading activity occurred, often indicating a key support or resistance level.
The indicator also allows the trader to see past consolidation areas and previous anchored VWAP's.
Give this indicator a BOOST and COMMENT your thoughts!
We hope you enjoy.
Cheers! Indicatore
Advanced VWAP_Pullback Strategy_Trend-Template QualifierGeneral Description and Unique Features of this Script
Introducing the Advanced VWAP Momentum-Pullback Strategy (long-only) that offers several unique features:
1. Our script/strategy utilizes Mark Minervini's Trend-Template as a qualifier for identifying stocks and other financial securities in confirmed uptrends. Mark Minervini, a 2x US Investment Champion, developed the Trend-Template, which covers eight different and independent characteristics that can be adjusted and optimized in this trend-following strategy to ensure the best results. The strategy will only trigger buy-signals in case the optimized qualifiers are being met.
2. Our strategy is based on the supply/demand balance in the market, making it timeless and effective across all timeframes. Whether you are day trading using 1- or 5-min charts or swing-trading using daily charts, this strategy can be applied and works very well.
3. We have also integrated technical indicators such as the RSI and the MA / VWAP crossover into this strategy to identify low-risk pullback entries in the context of confirmed uptrends. By doing so, the risk profile of this strategy and drawdowns are being reduced to an absolute minimum.
Minervini’s Trend-Template and the ‘Stage-Analysis’ of the Markets
This strategy is a so-called 'long-only' strategy. This means that we only take long positions, short positions are not considered.
The best market environment for such strategies are periods of stable upward trends in the so-called stage 2 - uptrend.
In stable upward trends, we increase our market exposure and risk.
In sideways markets and downward trends or bear markets, we reduce our exposure very quickly or go 100% to cash and wait for the markets to recover and improve. This allows us to avoid major losses and drawdowns.
This simple rule gives us a significant advantage over most undisciplined traders and amateurs!
'The Trend is your Friend'. This is a very old but true quote.
What's behind it???
• 98% of stocks made their biggest gains in a Phase 2 upward trend.
• If a stock is in a stable uptrend, this is evidence that larger institutions are buying the stock sustainably.
• By focusing on stocks that are in a stable uptrend, the chances of profit are significantly increased.
• In a stable uptrend, investors know exactly what to expect from further price developments. This makes it possible to locate low-risk entry points.
The goal is not to buy at the lowest price – the goal is to buy at the right price!
Each stock goes through the same maturity cycle – it starts at stage 1 and ends at stage 4
Stage 1 – Neglect Phase – Consolidation
Stage 2 – Progressive Phase – Accumulation
Stage 3 – Topping Phase – Distribution
Stage 4 – Downtrend – Capitulation
This strategy focuses on identifying stocks in confirmed stage 2 uptrends. This in itself gives us an advantage over long-term investors and less professional traders.
By focusing on stocks in a stage 2 uptrend, we avoid losses in downtrends (stage 4) or less profitable consolidation phases (stages 1 and 3). We are fully invested and put our money to work for us, and we are fully invested when stocks are in their stage 2 uptrends.
But how can we use technical chart analysis to find stocks that are in a stable stage 2 uptrend?
Mark Minervini has developed the so-called 'trend template' for this purpose. This is an essential part of our JS-TechTrading pullback strategy. For our watchlists, only those individual values that meet the tough requirements of Minervini's trend template are eligible.
The Trend Template
• 200d MA increasing over a period of at least 1 month, better 4-5 months or longer
• 150d MA above 200d MA
• 50d MA above 150d MA and 200d MA
• Course above 50d MA, 150d MA and 200d MA
• Ideally, the 50d MA is increasing over at least 1 month
• Price at least 25% above the 52w low
• Price within 25% of 52w high
• High relative strength according to IBD.
NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available in TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled.
This strategy can be applied to all timeframes from 5 min to daily.
The VWAP Momentum-Pullback Strategy
For the JS-TechTrading VWAP Momentum-Pullback Strategy, only stocks and other financial instruments that meet the selected criteria of Mark Minervini's trend template are recommended for algorithmic trading with this startegy.
A further prerequisite for generating a buy signals is that the individual value is in a short-term oversold state (RSI).
When the selling pressure is over and the continuation of the uptrend can be confirmed by the MA / VWAP crossover after reaching a price low, a buy signal is issued by this strategy.
Stop-loss limits and profit targets can be set variably. You also have the option to make use of the trailing stop exit strategy.
Relative Strength Index (RSI)
The Relative Strength Index (RSI) is a technical indicator developed by Welles Wilder in 1978. The RSI is used to perform a market value analysis and identify the strength of a trend as well as overbought and oversold conditions. The indicator is calculated on a scale from 0 to 100 and shows how much an asset has risen or fallen relative to its own price in recent periods.
The RSI is calculated as the ratio of average profits to average losses over a certain period of time. A high value of the RSI indicates an overbought situation, while a low value indicates an oversold situation. Typically, a value > 70 is considered an overbought threshold and a value < 30 is considered an oversold threshold. A value above 70 signals that a single value may be overvalued and a decrease in price is likely , while a value below 30 signals that a single value may be undervalued and an increase in price is likely.
For example, let's say you're watching a stock XYZ. After a prolonged falling movement, the RSI value of this stock has fallen to 26. This means that the stock is oversold and that it is time for a potential recovery. Therefore, a trader might decide to buy this stock in the hope that it will rise again soon.
The MA / VWAP Crossover Trading Strategy
This strategy combines two popular technical indicators: the Moving Average (MA) and the Volume Weighted Average Price (VWAP). The MA VWAP crossover strategy is used to identify potential trend reversals and entry/exit points in the market.
The VWAP is calculated by taking the average price of an asset for a given period, weighted by the volume traded at each price level. The MA, on the other hand, is calculated by taking the average price of an asset over a specified number of periods. When the MA crosses above the VWAP, it suggests that buying pressure is increasing, and it may be a good time to enter a long position. When the MA crosses below the VWAP, it suggests that selling pressure is increasing, and it may be a good time to exit a long position or enter a short position.
Traders typically use the MA VWAP crossover strategy in conjunction with other technical indicators and fundamental analysis to make more informed trading decisions. As with any trading strategy, it is important to carefully consider the risks and potential rewards before making any trades.
This strategy is applicable to all timeframes and the relevant parameters for the underlying indicators (RSI and MA/VWAP) can be adjusted and optimized as needed.
Backtesting
Backtesting gives outstanding results on all timeframes and drawdowns can be reduced to a minimum level. In this example, the hourly chart for MCFT has been used.
Settings for backtesting are:
- Period from Jan 2020 until March 2023
- Starting capital 100k USD
- Position size = 25% of equity
- 0.01% commission = USD 2.50.- per Trade
- Slippage = 2 ticks
Other comments
- This strategy has been designed to identify the most promising, highest probability entries and trades for each stock or other financial security.
- The combination of the Trend-Template and the RSI qualifiers results in a highly selective strategy which only considers the most promising swing-trading entries. As a result, you will normally only find a low number of trades for each stock or other financial security per year in case you apply this strategy for the daily charts. Shorter timeframes will result in a higher number of trades / year.
- Consequently, traders need to apply this strategy for a full watchlist rather than just one financial security.
Strategia
JS-TechTrading: VWAP Momentum_Pullback StrategyGeneral Description and Unique Features of this Script
Introducing the VWAP Momentum-Pullback Strategy (long-only) that offers several unique features:
1. Our script/strategy utilizes Mark Minervini's Trend-Template as a qualifier for identifying stocks and other financial securities in confirmed uptrends.
NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available on TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled.
2. Our strategy is based on the supply/demand balance in the market, making it timeless and effective across all timeframes. Whether you are day trading using 1- or 5-min charts or swing-trading using daily charts, this strategy can be applied and works very well.
3. We have also integrated technical indicators such as the RSI and the MA / VWAP crossover into this strategy to identify low-risk pullback entries in the context of confirmed uptrends. By doing so, the risk profile of this strategy and drawdowns are being reduced to an absolute minimum.
Minervini’s Trend-Template and the ‘Stage-Analysis’ of the Markets
This strategy is a so-called 'long-only' strategy. This means that we only take long positions, short positions are not considered.
The best market environment for such strategies are periods of stable upward trends in the so-called stage 2 - uptrend.
In stable upward trends, we increase our market exposure and risk.
In sideways markets and downward trends or bear markets, we reduce our exposure very quickly or go 100% to cash and wait for the markets to recover and improve. This allows us to avoid major losses and drawdowns.
This simple rule gives us a significant advantage over most undisciplined traders and amateurs!
'The Trend is your Friend'. This is a very old but true quote.
What's behind it???
• 98% of stocks made their biggest gains in a Phase 2 upward trend.
• If a stock is in a stable uptrend, this is evidence that larger institutions are buying the stock sustainably.
• By focusing on stocks that are in a stable uptrend, the chances of profit are significantly increased.
• In a stable uptrend, investors know exactly what to expect from further price developments. This makes it possible to locate low-risk entry points.
The goal is not to buy at the lowest price – the goal is to buy at the right price!
Each stock goes through the same maturity cycle – it starts at stage 1 and ends at stage 4
Stage 1 – Neglect Phase – Consolidation
Stage 2 – Progressive Phase – Accumulation
Stage 3 – Topping Phase – Distribution
Stage 4 – Downtrend – Capitulation
This strategy focuses on identifying stocks in confirmed stage 2 uptrends. This in itself gives us an advantage over long-term investors and less professional traders.
By focusing on stocks in a stage 2 uptrend, we avoid losses in downtrends (stage 4) or less profitable consolidation phases (stages 1 and 3). We are fully invested and put our money to work for us, and we are fully invested when stocks are in their stage 2 uptrends.
But how can we use technical chart analysis to find stocks that are in a stable stage 2 uptrend?
Mark Minervini has developed the so-called 'trend template' for this purpose. This is an essential part of our JS-TechTrading pullback strategy. For our watchlists, only those individual values that meet the tough requirements of Minervini's trend template are eligible.
The Trend Template
• 200d MA increasing over a period of at least 1 month, better 4-5 months or longer
• 150d MA above 200d MA
• 50d MA above 150d MA and 200d MA
• Course above 50d MA, 150d MA and 200d MA
• Ideally, the 50d MA is increasing over at least 1 month
• Price at least 25% above the 52w low
• Price within 25% of 52w high
• High relative strength according to IBD.
NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available in TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled.
This strategy can be applied to all timeframes from 5 min to daily.
The VWAP Momentum-Pullback Strateg y
For the JS-TechTrading VWAP Momentum-Pullback Strategy, only stocks and other financial instruments that meet the selected criteria of Mark Minervini's trend template are recommended for algorithmic trading with this startegy.
A further prerequisite for generating a buy signals is that the individual value is in a short-term oversold state (RSI).
When the selling pressure is over and the continuation of the uptrend can be confirmed by the MA / VWAP crossover after reaching a price low, a buy signal is issued by this strategy.
Stop-loss limits and profit targets can be set variably.
Relative Strength Index (RSI)
The Relative Strength Index (RSI) is a technical indicator developed by Welles Wilder in 1978. The RSI is used to perform a market value analysis and identify the strength of a trend as well as overbought and oversold conditions. The indicator is calculated on a scale from 0 to 100 and shows how much an asset has risen or fallen relative to its own price in recent periods.
The RSI is calculated as the ratio of average profits to average losses over a certain period of time. A high value of the RSI indicates an overbought situation, while a low value indicates an oversold situation. Typically, a value > 70 is considered an overbought threshold and a value < 30 is considered an oversold threshold. A value above 70 signals that a single value may be overvalued and a decrease in price is likely , while a value below 30 signals that a single value may be undervalued and an increase in price is likely.
For example, let's say you're watching a stock XYZ. After a prolonged falling movement, the RSI value of this stock has fallen to 26. This means that the stock is oversold and that it is time for a potential recovery. Therefore, a trader might decide to buy this stock in the hope that it will rise again soon.
The MA / VWAP Crossover Trading Strategy
This strategy combines two popular technical indicators: the Moving Average (MA) and the Volume Weighted Average Price (VWAP). The MA VWAP crossover strategy is used to identify potential trend reversals and entry/exit points in the market.
The VWAP is calculated by taking the average price of an asset for a given period, weighted by the volume traded at each price level. The MA, on the other hand, is calculated by taking the average price of an asset over a specified number of periods. When the MA crosses above the VWAP, it suggests that buying pressure is increasing, and it may be a good time to enter a long position. When the MA crosses below the VWAP, it suggests that selling pressure is increasing, and it may be a good time to exit a long position or enter a short position.
Traders typically use the MA VWAP crossover strategy in conjunction with other technical indicators and fundamental analysis to make more informed trading decisions. As with any trading strategy, it is important to carefully consider the risks and potential rewards before making any trades.
This strategy is applicable to all timeframes and the relevant parameters for the underlying indicators (RSI and MA/VWAP) can be adjusted and optimized as needed.
Backtesting
Backtesting gives outstanding results on all timeframes and drawdowns can be reduced to a minimum level. In this example, the hourly chart for MCFT has been used.
Settings for backtesting are:
- Period from April 2020 until April 2021 (1 yr)
- Starting capital 100k USD
- Position size = 25% of equity
- 0.01% commission = USD 2.50.- per Trade
- Slippage = 2 ticks
Other comments
• This strategy has been designed to identify the most promising, highest probability entries and trades for each stock or other financial security.
• The RSI qualifier is highly selective and filters out the most promising swing-trading entries. As a result, you will normally only find a low number of trades for each stock or other financial security per year in case you apply this strategy for the daily charts. Shorter timeframes will result in a higher number of trades / year.
• As a result, traders need to apply this strategy for a full watchlist rather than just one financial security.
Strategia
Indicatore
Strategia
Strategia
VWAP From Multiple Sources With Cloud & Percentage GapVWAP CLOUD FROM CLOSE, OPEN, HIGH & LOW SOURCES WITH CLOUD & PERCENTAGE GAP
VWAP stands for volume weighted average price and shows the average price of buys/sells based on volume traded across the current session. This VWAP is based off of the Daily session.
***HOW TO USE***
Use the purple cloud between the VWAPs as your entry points as price will typically bounce from that cloud area.
The Yellow Line is the VWAP using the close price as a source.
The Green Line is the VWAP using the open price as a source.
The Blue Line is the VWAP using the high price as a source.
The Purple Line is the VWAP using the low price as a source.
When price is above the VWAP cloud, the background will paint green because the trend is bullish.
When price is below the VWAP cloud, the background will paint red because the trend is bearish.
In the bottom right hand corner, three is a table that will show you the current percentage gap between current price and the VWAP using close as the source.
All sources and colors can be easily switched in the settings menu.
***MARKETS***
This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex.
***TIMEFRAMES***
This vwap indicator can be used on all timeframes but is calculated using the daily session.
***TIPS***
Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Auto Fibonacci, Volume Profile, Directional Movement Index, Momentum, Auto Support And Resistance and Money Flow Index in combination with this VWAP Cloud. The other indicators all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Indicatore
Indicatore
