Inizia

Alertsignals

SuperTrend Multi Time Frame Long and Short Trading Strategy Hello All This is non-repainting Supertrend Multi Time Frame script, I got so many request on Supertrend with Multi Time Frame. This is for all of them ..I am making it open for all so you can change its coding according to your need. How the Basic Indicator works SuperTrend is one of the most common ATR based trailing stop indicators. In this version you can change the ATR calculation method from the settings. Default method is RMA. The indicator is easy to use and gives an accurate reading about an ongoing trend. It is constructed with two parameters, namely period and multiplier. The default values used while constructing a Supertrend indicator are 10 for average true range or trading period and three for its multiplier. The average true range (ATR) plays an important role in 'Supertrend' as the indicator uses ATR to calculate its value. The ATR indicator signals the degree of price volatility . The buy and sell signals are generated when the indicator starts plotting either on top of the closing price or below the closing price. A buy signal is generated when the ‘Supertrend’ closes above the price and a sell signal is generated when it closes below the closing price. It also suggests that the trend is shifting from descending mode to ascending mode. Contrary to this, when a ‘Supertrend’ closes above the price, it generates a sell signal as the colour of the indicator changes into red. A ‘Supertrend’ indicator can be used on spot, futures, options or forex, or even crypto markets and also on daily, weekly and hourly charts as well, but generally, it fails in a sideways-moving market. How the Strategy works This is developed based on SuperTrend. Use two time frame for confirm all entry signals. Two time frame SuperTrend works as Trailing stop for both long and short positions. More securely execute orders, because it is wait until confine two time frames(example : daily and 30min) Each time frame developed as customisable for user to any timeframe. User can choose trading position side from Long, Short, and Both. Custom Stop Loss level, user can enter Stop Loss percentage based on timeframe using. Multiple Take Profit levels with customisable TP price percentage and position size. Back-testing with custom time frame. This strategy is develop for specially for automation purpose. The strategy includes: Entry for Long and Short. Take Profit. Stop Loss. Trailing Stop Loss. Position Size. Exit Signal. Risk Management Feature. Backtesting. Trading Alerts. Use the strategy with alerts This strategy is alert-ready. All you have to do is: Go on a pair you would like to trade Create an alert Select the strategy as a Trigger Wait for new orders to be sent to you This is develop for specially for automating trading on any exchange, if you need to get that automating service for this strategy or any Tradingview strategy or indicator please contact me I am have 8 year experience on that field. I hope you enjoy it! Thanks, Ranga
Strategia Pine Script™
di ranga_technologies
16
Crossover Alerts for Yesterday O/H/L/C , Today Vwap [Zero54]This is a very simple script/indicator that trigger alerts every time the script triggers the following conditions. 1) Script crosses yesterday's (previous day's) high 2) Script crosses yesterday's (previous day's) low 3) Script crosses yesterday's (previous day's) open 4) Script crosses yesterday's (previous day's) close 5) Script crosses today's vwap. I developed this to keep track of the scripts I follow and I find it useful. Hope you will find it useful too. Steps to use: 1) Open the ticker for which you want to set the alerts. 2) Add this indicator to the chart. 3) Right Click on the text and set choose "Add Alert" 4) After you have done with setting up the alert, feel free to remove the indicator from the chart. It is not necessary for the indicator to be added in the chart in order for it to work. 5) Repeat 1-4 for all the scripts for which you want to set the alerts. Be advised: During market open, if you have set alerts for multiple scripts, a tsunami of alerts may be triggered. If you like this alert indicator, please like/boost it. Feel free to re-use this code however you may wish to. Cheers!
Indicatore Pine Script™
di zero54
2
Bot Controller V1.1This script allows you to define various trading sessions with alerts for when the session starts and ends. This allows you to do things like switch your trading bots off while you are sleeping. It starts with default settings for weekday daytime, evening, nighttime, and weekends Setup recommendations: Use the Timezone setting in the indicator to match your trading view timezone setting to have alerts triggered when you expect Add alerts from a lower TF e.g 1min chart Use once per bar for the alerts Notes on alerts: If you have a session stop then immediately have another starting with no time break in between the start/stop alerts may overlap/trigger at the same time so it's probably best just to use the stop or start alerts for each session.
Indicatore Pine Script™
di bcuk
Squeeze Momentum Strategy [LazyBear] Buy Sell TP SL Alerts-Modified version of Squeeze Momentum Indicator by @LazyBear. -Converted to version 5, -Taken inspiration from @KivancOzbilgic for its buy sell calculations, -Used @Bunghole strategy template with Take Profit, Stop Loss and Enable/Disable Toggles -Added Custom Date Backtesting Module ------------------------------------------------------------------------------------------------------------------------ All credit goes to above Problem with original version: The original Squeeze Momentum Strategy did not have buy sell signals and there was alot of confusion as to when to enter and exit. There was no proper strategy that would allow backtesting on which further analysis could be carried out. There are 3 aspects this strategy: 1 ) Strategy Logic (easily toggleable from the dropdown menu from strategy settings) - LazyBear (I have made this simple by using Kivanc technique of Momentums Moving Average Crossover, BUY when MA cross above signal line, SELL when crossdown signal line) - Zero Crossover Line (BUY signal when crossover zero line, and SELL crossdown zero line) 2) Long Short TP and SL - In strategies there is usually only 1 SL and 1 TP, and it is assumed that if a 2% SL giving a good profit %, then it would be best for both long and short. However this is not the case for many. Many markets/pairs, go down with much more speed then they go up with. Hence once we have a profitable backtesting setting, then we should start optimizing Long and Short SL's seperately. Once that is done, we should start optimizing for Long and Short TP's separately, starting with Longs first in both cases. 3) Enable and Disable Toggles of Long and Short Trades - Many markets dont allow short trades, or are not suitable for short trades. In this case it would be much more feasible to disable "Short" Trading and see results of Long Only as a built in graphic view of backtestor provides a more easy to understand data feed as compared to the performance summary in which you have to review long and short profitability separately. 4) Custom Data Backtesting - One of most crucial aspects while optimizing for backtesting is to check a strategies performance on uptrends, downtrend and sideways markets seperately as to understand the weak points of strategy. - Once you enable custom date backtesting, you will see lines on the chart which can be dragged left right based on where you want to start and end the backtesting from and to. Note: - Not a financial advise - Open to feedback, questions, improvements, errors etc. - More info on how the squeeze momentum works visit LazyBear indicator link: Happy Trading! Cheers M Tahreem Alam @mtahreemalam
Strategia Pine Script™
di mtahreemalam
11
Crodl Auto TraderI've added Buy & Sell Flags - They will be used to add Longs and Shorts Flags as well as the ability to add alerts on them. What triggers the Buy signal? Buy signal = This indicator make use of the rsi (Relative Strength Index) to look at specific overbought and oversold levels as confirmation if it is an uptrend and not overbought yet. This will indicate that a long opportunity will be possible. The SMA (slow moving average) is being used to calculate where to entry as it uses Crossed SMA's for entries. SMA and EMA Crosses with the RSI (not overbought) will give as a buy signal if the SMA cross the EMA. Sell signal = When the Rsi is not oversold this will give a good confirmation that the market still has downwards potential and it will wait for a cross on the SMA and EMA when crossed over for a sell signal. If we get a cross but the RSI is oversold that will be seen as a bad signal and it will be avoided. Take Profit - Currently there are 4 Hardcoded Targets and on the backtester you will see the results for all 4 separately on the Info Panel. The 4 green lines (TP) 1st line is at 0.5% market move, 2nd line is at 1% market move ,3rd one is at 1.5% market move and the last and 4th line is at 2%. This will be where it will take profit unless you set the Exit Strategy to Opposite then it will use the opposite flags to exit. So when it is set to Opposite and the previous flag was a long then it will exit on the next short flag and when the previous flag was a short flag then it will exit on the next long flag. if the exit strategy is set to CrodlExit it will use an ATR based exit. so if the previous flag was a short it will wait for price to cross an ATR level then it will close the short and the same if the last flag was a long it will only be closed if a TP (green line) level has been reached or the ATR level for an exit. if the Exit Strategy has been set to Fixed SL then you can set the sl at a specific %. if you set the Fixed SL at 2% that means if the last flag was a buy signal then if the TP targets was not reached first and the market moves downwards by 2% it will exit and wait for the next flag, if you are in a short and the TP level was not reached if the market moves 2% upwards it will close your short. Backtest Data has 3 options. You can choose for it to show both Long(Buy) and short(sell) or just Buy or just Sell data. Statistics Type will show you the info panel on the right. if you set it on Simple you will see the following data Asset that you are currently on as well as the timeframe. and the date it starts reading data to plot entries from. this will change depending on the timeframe that you are on. since higher timeframes will show you candles from longer time back as lower time frames. Total = The amount of buy and sell flags since the first trade data and buy will give you the buy amount flags shown since that date and sell will show you the amount of sell flags since the start date. Total win = this will tell you how many trades reached the TP (green lines) before a exit condition was met. Total loss = this will show you how many of the flags exited based on the exit type selected before a TP target was reached. TP1= how many time we reached the first target level at 0.5% TP2= how many time we reached the second target level at 1.0% TP3= how many time we reached the third target level at 1.5% TP4= how many time we reached the fourth target level at 2.0% the % are calculated from the total wins and total losses and it will give you the % difference. If the % is bigger than 80 it will have a green background and if its less than 80% but more than 50% then it will be orange, if it is less than 50% it will be red. win streak is the average of how many times we reached the profit target in a row before we reached an exit target based on the exit strategy Loss streak is the average of how Many losses we had in a row before we reached the TP1 level Longest Winning streak is how many times after one win we had another wining trade meaning TP reached before a stop level based on the exit strategy Longest losing streak is the amount of times we reached the SL level based on the exit strategy before reaching a TP level or the opposite flag depending on the setting based on exit strategy. to hide the info panel you can set the statistics to Coming soon. Alerts can be set on all the TP targets and Entries(Buy and Sell flag) as well as all the exit strategies.
Indicatore Pine Script™
di crodl
Signal generatorThis simple script generates signals for testing the connection from TradingView to a REST API client via the webhook and demonstrates very basic concepts of gerenating alerts within the script. This script also demonstrates how to visualize when a buy or a sell should take place and how to use diagnostics text for bug fixes/informational purposes. This is for testing and learning only. Do not use with real money as losses WILL occur. This script is for educational purposes only and should only be used with demo accounts, never with real money . Buy signals are generated when closing price is less then opening price. Sell Signals are generated when closing price is greater then opening price. Can also be used to test signal counting and very rudimentary dollar cost averaging.
Indicatore Pine Script™
di RobertD7723
MTF Kagi Indicator v1.0Introduction The indicator attempts to implement a time-based, multi-timeframe, non-repainting Kagi lines as an overlay to your chart using traditional candlesticks. How is it original and useful? This indicator is unique in that it allows you to choose from among three different methods to define the reversal amount. They are: ATR (Average True Range): After each Kagi line is drawn, the latest ATR value from the selected timeframe will be used until a new vertical Kagi line is drawn. At this point, the latest ATR value will be used for the reversal amount until it changes again. This means that the reversal amount will adjust as price action volatility changes. Fixed Amount: This method will be useful if you desire to fix the reversal amount, like the normal Kagi Chart. Thus, use this option if you desire to mimic the same Kagi Chart on TradingView. Percent of Price: This method, like the ATR, will produce the reversal amount using the latest close price against the given percentage value. In addition, the indicator will allow you to define the Up and Down line colors and width. You can even elect to have a Kagi line drawn on the real-time bar or not. How does it compare to other scripts in the Public Library? This indicator makes use of the security() function and applies the best-practices as provided by the PineCoders' script called " `security()` revisited " so that the indicator will not repaint when you refresh the chart or re-open it at a later date. In addition, the indicator provides three possible alerts for Alert Conditions or Any Alert() Function Call. They are: "Break Shoulder" - this alert will trigger (Once Per Bar) when the close price crosses above the shoulder (higher) of the previous Kagi line. "Break Waist" - this alert will trigger (Once Per Bar) when the close price crosses below the waist (lower) of the previous Kagi line. "New Kagi Line" - this alert will trigger (Once Per Bar) when the indicator draws a new vertical Kagi line and continues to monitor the next trend change. When using the "Any alert() function call" option in creating alerts, the following placeholders are supported in the alert message: {{shoulder_price}}, {{waist_price}}, and {{kagi_close_price}} What does it do and how does it do it? When applied to the chart for the first time, the default settings will work to produce Kagi lines from the beginning of the chart history up to the real-time bar. The Kagi line width will have a width of 1 pixel and the colors will match the normal color schemes that TradingView charts have for rising and falling colors. The reversal method will default to ATR with a period length of 14 so that it can provide a visually appealing Kagi lines where the reversal amount will be adaptive for all price charts. The default timeframe will be the chart's timeframe, but it can be changed to any higher timeframe. Using a timeframe that is lower than the current chart will not disable the indicator, but the lines will not be accurate since lower timeframe prices are being grouped to fit the current timeframe. Enjoy! 😊👍
Indicatore Pine Script™
di prosum_solutions
7
Fishing The Trend - Setup Classic v7.5.5FTT Classic v7.5.5 HOW Does it work ? It is the classic version of Fishing The Trend-Setup for ease of trading & for getting the most from the market. i.e. Combining the most useful indicators and making a whole setup under one roof... FTT Classic comprises of following -- * IntraDay Range. * Fishing The Trend. * Custom VWAP. * Baseband for Trend. * Trendlines. * Support & Resistance Lines. * BreakOut Area. * Technical Analysis table. * Custom alerts. 1) HOW Does Intraday Range work ? # For calculating the average most probable range for any symbol, it plots two areas - higher range and a lower range. # This indicator is on - as default. # Upper and Lower areas act as support and resistance, user may see a reversal in trend from these areas. # If the price breaks these bands, breakout be considered. # These bands are calculated by averaging the previous x number of days' high and low of the security. 3) HOW Does Fishing The Trend work ? # When the market trend may try to reverse, the first signal/label will come showing Stop loss figure, and then if the trend reversal is confirmed, the supporting triangle in the next opening price will be placed at upper or lower side. along with these there is a trailing stop-loss line, which will help user to trail their profits in-live. # The CE-PE can be seen through the table with date and time. # 2nd table also can be placed below the first one, showing the CE-PE Values for different symbol. # Signals can be controlled by more or less as optioned in the settings. # CE-PE strike price can be selected from ATM - ITM - OTM. 4) HOW Does Custom VWAP work ? # VWAP will be placed having a line and current price of VWAP. # One can have vwap in index chart also, the colour changes as the market goes above or below vwap or at vwap. 5) HOW Does Baseband for Trend work ? # Baseband will be plotted for least 2 days on 3 min and gradually increases on increase of timeframe. # If the market is above band, we may consider it a positive side and if market is below it, we may consider a negative side. # Type 1 band is for trending market and type 2 is for rangebound market. # Colour intensity also changes as market picks-up momentum or leaves momentum. 6) HOW Does Trendlines work ? # Most nearest to most touching trendlines are placed for better understanding the trend. # Easy to understand with the help of colour combinations. 7) HOW Does Support & Resistance Lines work ? # The support & resistance lines will be drawn when market movement slows down or momentum decrease. # The Support lines becomes resistance when market falls below it, and vice-versa for other conditions. # Range development can be easily detected and can be used as range breakout for better understanding the market. 8) HOW Does BreakOut Area work ? # Market Consolidates at most of the time, where the bulls and bears fight becomes more aggressive, at this point of time the area will be formed or area will be formed when market trend reverses suddenly, leaving behind the previous breakout area. # Ease of trend reversal, previous supports / resistances can be seen easily. 9) HOW Does Technical Analysis table work ? # There will be RSI displayed and for the better range detection, range area with price can be seen. # The GAP of the opening market is seen with gap points (Down or Up) 10) HOW Does Custom alerts work ? # Alerts can enabled for the CE-PE Strike Price through alerts management from Tradingview. # Alerts can also be set when the Traffic Signal Comes. Where to use? # If the chart is of Index or equity, extended trading hours to be selected, time shall be exchange. # Indicator wont work on timeframes lower than minutes or higher than or equal to day. # can be used in every type of market. # Extended to be selected for Index or Equities/Stocks, Regular be selected for futures, etc. # At every part / portion the tooltip is placed showing the quick reference for that option. # The main use of this indicator is quick scalping and Intra-day trading. # Colour Theme can be selected if the chart theme is dark or light. # The indicator shows a very useful option for early detection of the ongoing trend whether there will be reversal of trend or not ? Stop Loss - That should be done by following ones risk appetite, Ideally the High of the Previous Candle should be the stop loss for the Long / Short but everyone has their own Risk Management Strategies based on the capital deployed. How to Take entry ? # Time Frame shall be more than 2 min and less than day for better outcome. # If buy signal comes and the market is below the baseband then wait for the market to cross and close above the baseband, also look for the immediate support or resistances which are seen in chart and those nearby the current signal. # The data for the indicator will be very restricted, most of the parts in indicator wont work when the market closes. # Pre-Opening or Post -Market data is tried to be ignored. # Utmost Care is taken to implement the suggestions of users and also tried to keep the chart neat and clean. ** N.B.:- There may be cases where warning may come during setting the alert, this because of alert conditions are taken ONLY when the current candle is CLOSED, real-time alerts are considered as not feasible to get it. Disclaimer # The indicator to be used for understanding / learning the markets. # User is responsible for his / her profits/losses, that may occur during the markets.
Indicatore Pine Script™
di GrowMore_Indicators
2
Multi-timeframe MAs + Stoch RSI SignalsHello traders, I welcome you to my first published script on TradingView: “Multi-timeframe Moving Averages + Stochastic RSI”. The script is based on a simple formula: Buy signals are generated when a fast moving average is above a slower moving average (uptrend) and the Stochastic RSI K line is crossing above the oversold level (entry). Sell signals are generated when a fast moving average is below a slower moving average (downtrend) and the Stochastic RSI K line is crossing below the overbought level (entry). This indicator works best in strong trends! **Please note the above example has repainting turned on which may produce unrealistic results when viewing historical data. See below for more information regarding this and how you can turn it off.** The user has the following inputs: - Option to change the Stochastic RSI settings, including the oversold and overbought levels. - Option to enter any value for both the Fast Moving Average and the Slow Moving Average. - Option to change between EMA or SMA for each moving average. - Multiple time frames to choose from, as well as the ability to selectively turn off individual time frames (both plots and alerts). (Default time frames are 1 hour, 4 hour, and Daily. You can have a 4th time frame by changing your current time frame to something lower than the other 3 time frames) - Turn on/off repainting: If repainting is turned on you will get an alert and buy/sell signal on chart immediately when condition is met, however the signal may disappear from chart if the condition reverses during the same candle. If repainting is turned off, the indicator will wait for the candle to close before issuing the alert and painting the signal on chart. For higher time frames, the indicator will wait for the candle in the higher time frame to close before issuing a signal if repaint is turned off. Default is set to Repaint on, so please be aware of this if you do not want repainting. How to use alerts: - Before you do anything, make sure your current time frame is the lowest time frame you’d like alerts on, as you will still receive alerts for the higher time frames you selected in settings. - Once you have all the settings changed to how you like, save your chart first. Then right click on any of the indicator’s buy/sell signals on the chart and click “Add Alert on MAs + Stoch RSI”. - Make sure “Any alert() function call” is selected under the Condition. - You can delete or change the text in “Alert name” if you want as the alert message is already built into the indicator, and it will tell you in the alert message which asset and time frame to buy or sell. Other things to note: - The indicator will not display the buy/sell signals of lower time frames when you are on a higher time frame. This was done purposely to reduce clutter on the chart when you switch to higher time frames. - While the alert message will tell you which time frame a signal was generated, the plots on the chart will instead show “Buy/Sell TF1, or TF2, or TF3”. If the signal is from the current time frame that the alert was created on, then it will simply show “Buy” or “Sell”. Hope you guys enjoy using this one, please drop a like if you found it useful. If anyone wants to modify my script in any way, please just credit me for the original work when you publish the script. Good luck!
Indicatore Pine Script™
di tommyf1001
12
Custom Screener with Alerts V2 [QuantNomad]TradingView just recently announced the alert() function that allows you to create dynamic alerts from both strategies and studies. So I decided to update custom screener I published before. It was based on alerts from orders in strategies, that was the only way to create dynamic alerts in PineScript at that point. With the alert() function code become cleaner and more readable. It works for up to 40 symbols at the same time. You can create an alert from it easily by selecting screener name from the list and then selecting "Any alert() function call". No additional configuration is required, message and alert on close I set up in the code. I created as an example a screener that tracks both overbought (RSI > 70) and oversold stocks (RSI < 30). To create your own screener you have to change only screenerFunc(). By design it should output 2 values: cond - True/False Boolean variable. Should this instrument be displayed in the screener? value - Additional numeric value you can display in your screener. I display RSI level for selected stocks for example. Link to the old screener: Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as good as in historical backtesting. This post and the script don’t provide any financial advice.
Indicatore Pine Script™
di QuantNomad
29
BEST Ultimate Engulfing ScreenerHello traders Continuing deeper and stronger with the screeners serie. I keep getting requests private messages and requests saying that screeners aren't possible with TradingView. My answer is always... "Reallyyy ??" (I never find a better answer than that...) I'll publish a few screeners just for everyone to understand what can be done with Pinescript. We don't have to wait for TradingView to allow screener based on custom indicator - we can build our own ^^ I - What is an engulfing pattern Let's start with a screener to check for a very famous candlestick pattern called engulfing Engulfing candles tend to signal a reversal of the current trend in the market. This specific pattern involves two candles with the latter candle ‘engulfing’ the entire body of the candle before it. The engulfing candle can be bullish or bearish depending on where it forms in relation to the existing trend Source and more info here These engulfing candles indicate a strong shift in direction, and when combined with observation of the price-trending direction that precedes it, this shift creates the opportunity for a trading strategy. II - How did I set the screener I added an optional filter being Price vs SMA. The idea is to select only the engulfing whenever the price also breaks an SMA - this usually translates a stronger move - but could sometimes give the signal too late (#meh #trading #ain't #easy) The visual signals are as follow: - square: whenever the engine detects an engulfing and an SMA breakout - triangle: the engine only detects an engulfing - dash: none of the above Then the colors are: - orange when bullish - yellow when bearish - aqua/dash when none of the above Cool Hacks "But sir... what can we do with only 5 instruments for a screener?" I agree not much but... even if I allow only 5 instruments per indicator - nothing prevents you from adding multiple times the same indicator and changing the selected instruments for each. I also show why the SPX500 gave a yellow triangle (bearish engulfing) and how to match it with the screener. => imgur.com Wishing you all the BEST trading Dave
Indicatore Pine Script™
di Daveatt
8
Main Trend Alert v1.1*** New Version of Main Trend Alert *** This is an indicator that shows the main trend of and chart (crypto, forex, stock and etc). Good for day trading. - HOW TO USE: When you are on lower timeframe, set the "Main Timeframe" to a higher timeframe from settings. For example: Set "Main Timeframe = 1 Hour" when you are trading on 5 minute chart. * Never trade just based on alerts of this script. Always use it with a system you like. Keep in mind that his script doesn't determine the stop loss and exit point. * NO REPAINTS * Good Luck,
Indicatore Pine Script™
di aliakbari
1
JERK UP {LM.Alerts Edition} (D)This is the " LONGS-MANAGEMENT Alerts " {LM.Alerts} Edition of JERK UP to enable auto-trading via alerts signaling. Only the long-signals, generated from the underlying JERK UP algorithm, is used in this strategy-alerts script, with my latest risk-exit (collect gains) and stop-limit algorithms, as well as a bear-market filter, implemented. ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ Since {LM.Alerts} engine only focuses on trading and managing longs, a bear-market filter is implemented base on the FUSIONGAPS indicator. The FUSIONGAPS algorithm signals local bull or bear market phases, and then disables trades conditionally to reduce the chances of having to take losses during a local bear market phase (since the short-signals are not traded). Enabling the different (Fastest >> Slowest) FUSIONGAPS levels (e.g. 50/15, 100/50, 200/50, 200/100, etc) activates the use of each of these levels to decide the local bull/bear market phases. So in summary, the {LM.Alerts} algorithm trades up a bullish-hill, taking profits along the way; but stops all trading activity when the market is rolling down a bearish-hill; and then once a local bull-phase is detected again, it resumes trading, etc. Note: To trade on both bullish and bearish phases, {LM.Alerts} scripts can be applied on an inverse-chart (i.e. 0-BTCUSD) for shorts. The {LM.Alerts} engine will be ported to my other more powerful trade-signaling scripts in the future. ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ FUSIONGAPS V5 Note: In no way is this intended as a financial/investment/trading advice. You are responsible for your own investment decisions and/or trades. ~JuniAiko (=^~^=)v~
Indicatore Pine Script™
di cybernetwork
1