Inizia

Pattern grafici

KOBK ORB - Dynamic Opening Range Breakout# KOBK ORB - Dynamic Opening Range Breakout ## What is KOBK ORB? KOBK ORB is a professional-grade **Opening Range Breakout (ORB)** indicator designed for intraday traders. It automatically detects and tracks opening ranges during the first 5, 15, 30, and 60 minutes of the trading session, then signals when price breaks out of these ranges with advanced filtering. --- ## Key Features ✅ **Multi-Stage ORB Levels** - Tracks 5, 15, 30, and 60-minute opening ranges simultaneously ✅ **Automatic Breakout Detection** - Identifies when price breaks above/below ORB levels with visual labels ✅ **Retest Identification** - Shows when price returns to test ORB after breaking out (re-entry opportunities) ✅ **Smart Filters** - Volume, Trend, and Higher Timeframe bias filters to reduce false signals ✅ **Position Sizing** - Calculates shares to buy based on your risk management rules (fixed risk $ or % of account) ✅ **Automatic TP/SL Levels** - Displays entry, stop loss, and take profit targets (1R, 1.5R, 2R, 3R options) ✅ **Real-Time Dashboard** - Shows session stats, breakout counts, volatility meter, and trade performance ✅ **Risk/Reward Display** - Calculates R/R ratio for every trade setup --- ## How to Use ### 1. **Setup** - Apply indicator to **5-minute chart** during regular trading hours - Set your account size and risk per trade in settings - Enable/disable ORB stages (5, 15, 30, 60 min) based on your strategy ### 2. **Read the ORB Levels** - Yellow lines = ORB5 (first 5 minutes) - Green lines = ORB15 (first 15 minutes) - Blue lines = ORB30 (first 30 minutes) - Purple lines = ORB60 (first 60 minutes) - Watch for breakouts above the HIGH or below the LOW ### 3. **Take Breakout Signals** - **Green UP label** = Price broke above ORB High (long signal) - **Red DOWN label** = Price broke below ORB Low (short signal) - Entry price, stop loss, and profit targets appear automatically - Check dashboard for Volume, Trend, and HTF bias confirmation ### 4. **Trade Management** - **Entry** = Breakout level (shown as cyan/orange line) - **Stop Loss** = Red line (calculated by your stop method) - **Take Profits** = Green lines (1R, 2R, 3R options) - Lines freeze when last TP hits or SL is touched ### 5. **Monitor Dashboard** - **Volume Status** = Shows if breakout has volume confirmation - **Trend Filter** = Shows if price is in bullish/bearish trend - **HTF Bias** = Shows if higher timeframe supports your trade - **Daily Stats** = Tracks breakouts, retests, failed breaks today - **Position Size** = Max shares to buy to stay within your risk --- ## Settings Guide ### Essential Settings - **Enable ORB 5/15/30/60** - Choose which timeframes to track - **Risk Mode** - Set risk per trade ($ amount or % of account) - **Account Size** - Your total trading capital - **Stop Method** - ATR, ORB %, Swing, or Smart Adaptive ### Filters (Optional but Recommended) - **Volume Filter** - Requires minimum volume for breakout confirmation - **Trend Filter** - Only takes breakouts aligned with trend - **Higher Timeframe** - Checks daily trend before taking signals ### Display - **Show Background** - Fills ORB range with color - **Show Edge Labels** - Labels at ORB high/low - **Show TP/SL Lines** - Displays profit targets on chart - **Show Dashboard** - Real-time trade info panel --- ## Best Practices 🎯 **Best for:** Liquid stocks with >1M daily volume (SPY, QQQ, individual stocks) ⏰ **Best time:** 9:30-11:30 AM EST (first 2 hours when liquidity is highest) 📊 **Recommended:** Use on 5-minute charts for optimal signal quality ⚠️ **Risk Management:** Never risk more than 1-2% of account per trade 💡 **Tip:** Check HTF bias (daily trend) before taking signals - breakouts WITH trend have higher success rate ❌ **Avoid:** Choppy/ranging markets, low-volume stocks, earnings days --- ## Example Trade **Scenario: LONG Breakout** 1. Market opens 9:30 AM 2. ORB5 is $100-$101 (range = $1) 3. Price breaks above $101 at 9:35 AM → **GREEN UP LABEL** appears 4. Dashboard shows: Entry $101.20, SL $100.50, TP1 $102.20 (+1R), TP2 $103.20 (+2R) 5. Position sizing shows: 150 shares max ($150 risk ÷ $1 stop distance) 6. Watch the green line extend as price rallies 7. Exit at TP1 ($102.20) for +$150 profit, or hold for TP2 (+$300 profit) 8. If SL hits, max loss = $150 (1R) --- ## Important Notes ⚠️ **Educational Use** - This indicator is for learning and strategy development 📈 **Paper Trade First** - Test on paper trading before risking real money 🔔 **Alerts Available** - Set up alerts for breakouts, retests, and failed breaks 💾 **Customize** - All colors, timeframes, and levels are adjustable --- ## Disclaimer This indicator is for **educational and informational purposes only**. It does not constitute financial advice. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always do your own research and consult with a financial advisor before trading.
Indicatore Pine Script®
di claudecurry23
Liquidity Hunt Detector PDH/PDL [SmartFoxy]Liquidity Hunt Detector PDH/PDL The Liquidity Hunt Detector (LHD) is designed to identify and anticipate liquidity grabs around the: • Previous Day High (PDH); • Previous Day Low (PDL). It builds dynamic trigger levels that highlight where price may deliver its first impulse before reaching PDH/PDL. The Liquidity Hunt Detector (LHD) identifies high-probability reversals and continuations around the Previous Day High (PDH) and Previous Day Low (PDL). It dynamically tracks the market’s move from the session open, builds trigger levels toward PDH/PDL, and highlights where liquidity is most likely to be taken. When price taps a Trigger Up/Down level, the indicator generates Long/Short signals with optional confirmation from the integrated MA Ribbon , ensuring only high-quality, trend-aligned setups are shown. When price interacts with these trigger levels, the indicator generates signals that help traders evaluate the market structure and prepare for potential entries. Designed for Forex, Crypto, Indices, Stocks , the LHD provides a clean and intuitive structure for navigating intraday liquidity grabs, session impulses, and directional bias shifts. The indicator is built from three fully independent modules, each of which can be used separately: Liquidity Hunt Detector (LHD) Moving Average Ribbon (MA Ribbon) Previous Day High/Low (PDH/PDL) levels Liquidity Hunt Detector (LHD) Logic 1.1 Display LHD – Enables or disables the entire Liquidity Hunt Detector module. 1.2 Max Days – Number of previous days used to generate PDH/PDL levels. 1.3 GMT – Corrects all time-based calculations based on your broker/session timezone. 1.4 Calculation Method (Point A Logic) 1) Static Method Point A = the session’s opening price. Trigger lines are calculated strictly as a percentage of the move A → PDH or A → PDL. Intraday fluctuations do not affect the calculation. 2) Dynamic Method Point A updates using the current intraday high/low: • If price forms a new low, Point A updates for the PDH-side calculations; • If price forms a new high, Point A updates for the PDL-side calculations. This produces trigger lines that reflect the true live market structure rather than a fixed opening reference. 1.5 Main OTT Time (Operational Trading Time) This is the core time window during which the indicator: • updates Point A; • calculates trigger levels; • validates PDH/PDL; • draws AB / AC movement structure; • generates entry signals. Outside this window, no new signals or recalculations occur. ⚠ If your broker’s first candle opens at a non-standard time (e.g., 00:08), adjust the OTT start time to avoid visual artifacts. 1.6 Show Line A – Displays the opening price level (Point A) until the end of the OTT window. Style, width, and color are customizable. 1.7 Show Line AB — Price Movement Toward PDH. Static Method – Single line: A → PDH Dynamic Method – Two segments: • A → Daily Low; • Daily Low → PDH. If PDH is swept, the “B” label switches to Sweep PDH. 1.8 Show Line AC – Price Movement Toward PDL. Static Method – Single line: A → PDL Dynamic Method – Two segments: • A → Daily High; • Daily High → PDL. If PDL is swept, the “C” label switches to Sweep PDL. 1.9 Show Trigger Up Line (LONG Trigger) – Defines the level where the Long signal can activate. By default, at 50% of the A → PDH movement. When price touches this line, the script may: • show a LONG label; • trigger an alert. All visual parameters are customizable. 1.10 Show Trigger Up Line (LONG Trigger) Same logic as Trigger Up, but based on A → PDL. 1.11 Show Main Zone (OTT Zone) – Visual background highlighting of the active OTT window. Helps instantly see: • whether signals are allowed; • how much time remains in the trading window? Color and opacity are adjustable. 1.12 Upper Zone (toward PDH) – Tracks the protected area towards PDH. Updates dynamically with new highs. 1.13 Lower Zone (toward PDL) – Tracks the zone toward PDL. Updates dynamically with new lows. 1.14 Show Labels – Displays reference labels (A, B, C, Trigger Up, Trigger Down). Label size is customizable. 1.15 Add Price – Adds the exact price value to each label. 1.16 Change Color after Sweep PDH or PDL – After PDH or PDL is broken, the indicator automatically recolors lines and labels to visually confirm the sweep. 1.17 Show SHORT Label – Displays the SHORT entry label when all conditions for a bearish signal are met. Style parameters are set in the previous blocks. 1.18 Alert on Bearish Trigger Down – Triggers an alert when the price activates the bearish trigger. 1.19 Show LONG Label – Displays the LONG entry label when bullish conditions are met. Style parameters are set in the previous blocks. 1.20 Alert on Bullish Trigger Up – Triggers an alert when the price activates the bullish trigger. 1.21 Alerts Active Time – Defines a custom time interval during which trigger signals are allowed. Even if price touches a trigger level, ❗ signals will NOT be generated outside this allowed time. Useful for: • avoiding Asian session signals; • reducing noise in low-liquidity periods. 1.22 Labels and Alerts Display Mode Two settings modes: • On Trigger (Instant Mode) – Signals appear immediately when price touches the trigger. • On Candle Close (Conservative Mode) – Signals form only after the candle closes beyond the trigger level. A more conservative option. 1.23 Delay LHD Signal Until MA Ribbon Confirms Direction – If enabled, LHD signals will NOT fire until the MA Ribbon produces a matching directional signal. Logic: • Price hits the trigger → LHD conditions become “armed”; • The indicator waits; • When MA Ribbon confirms trend direction (Long/Short); • The final LHD label + alert is generated. This ensures LHD trades are filtered and aligned with MA-based trend confirmation. ⚠ Works only when the MA Ribbon module is active.
Indicatore Pine Script®
di nreact25
2
2 EMA Crossover Signal. Paid Version2 EMA Crossover Signal. Indicator comes with alert and EMA can be changed by user. Default EMA is 9/20 The 2 EMA Crossover Signal is a powerful, easy-to-use technical indicator designed to help traders identify potential trend reversals and momentum shifts with precision. By combining two Exponential Moving Averages (EMAs) of different lengths, this indicator highlights moments when the market may be transitioning from bearish to bullish conditions—or vice versa. These crossover points often signal the beginning of new trends, making them highly valuable for traders looking to enter or exit positions with confidence. This tool continuously monitors the relationship between the fast EMA and the slow EMA. When the fast EMA crosses above the slow EMA, it generates a bullish signal, suggesting upward momentum and a potential buying opportunity. Conversely, when the fast EMA crosses below the slow EMA, it issues a bearish signal, indicating downward pressure and a possible selling or shorting opportunity. The 2 EMA Crossover Signal is ideal for traders of all experience levels and works effectively across multiple timeframes—whether you're day trading, swing trading, or analyzing long-term trends. It helps simplify market noise, provides cleaner trend direction, and enhances decision-making by giving visually clear signals on your chart. With its straightforward behavior and consistent performance, this indicator is a must-have for anyone looking to trade with more structure, discipline, and clarity.
Indicatore Pine Script®
di MoonShotTrading
UltimateFlow by Kate V0.2 Invite OnlyThe Ultimate Flow Script combines multiple proven tools into a single, high-precision trading assistant for short-term and intraday moves. Designed for traders who want clarity and speed, it integrates: Order Blocks – spot key supply & demand areas Chandelier Exit – manage stops and exits Fibonacci Levels – identify retracements & extensions ZLSMA Trend Filter – detect trend direction Trend Reversal Signals – capture tiny scalp moves Why it’s unique: This unique combination of tools is carefully combined so that each element reinforces the others, reducing noise and highlighting high-probability setups. Most settings are fully adjustable, letting you fine-tune it for your preferred style. Usage: Ideal for short-term trades, intraday scalps, and trend reversals Works best on clean charts, but all indicators and settings are editable Invite-Only protects the proprietary combination while still giving traders actionable insights Originality & Credits: Inspired by existing indicators, but the combination, logic, and workflow are original Closed-source to protect the methodology
Indicatore Pine Script®
di UltimateFlow
Candlestick toolkit (Candle Over Candle)Candlestick pattern toolkit focused on reading price action via candle anatomy, body dynamics, and a specific 2-bar continuation/reversal pattern. This indicator highlights: Long upper and lower wicks (“topping” and “bottoming” tails) that can signal exhaustion or potential reversal. Large bullish bodies relative to Average True Range (ATR), showing strong momentum. Sequences of large green candles. Runs of green candles with strictly increasing or strictly decreasing body size, to visualize acceleration vs. momentum fade. A two-candle pattern: “Candle over Candle” (CoC) for long bias: two bullish bars where the first has a small upper wick and the second has a modest lower wick (a brief dip then push higher). Optional mirrored “Candle under Candle” (CuC) for short bias. The script labels: Topping/Bottoming tails (TT/BT). Large-green sequences and increasing/decreasing bodies (N×LG, ↑B, ↓B). CoC/CuC pattern bars as “PRE” and the actual breakout bars as “GO”. While a pattern is “live,” a reference line marks the trigger level (pattern high for longs, pattern low for shorts). Inputs let you: Tune wick and body percentage thresholds for tail detection. Adjust ATR length and the multiplier that defines a “large” body. Change how many candles are required for large-green sequences and body size trends. Configure the two-candle pattern (maximum wick sizes, whether a small dip is required, confirmation within N bars). Choose confirmation mode: close-through the trigger or intrabar wick break. Enable or disable the short (CuC) side. Control visual features (tail markers, sequence markers, pattern labels, and background shading on pattern bars). Typical use: Apply on intraday or swing timeframes. Use tails and body behavior to read strength/weakness and potential exhaustion. Treat CoC/CuC PRE labels as pattern formation, and GO labels as potential trade triggers above/below the pattern. Combine with your own filters (trend, volume, higher-timeframe levels) rather than using it as a standalone signal generator.
Indicatore Pine Script®
di DayTradingMD1992
UltimateFlow by Kate V0.1 (Invite Only)Ultimate Flow Script: Tracks market structure breaks, buy/sell entries (CE/SE), and trends with a Zero Lag SMA. Highlights Bullish & Bearish Order Blocks (OB, BB, MM) with dynamic boxes and tiny labels. Zigzag swings visualize market structure for smart entries. Play with the various settings to suit your trading style. Alerts available for MSB changes and price in OB zones. Disclaimer: This script is for educational and informational purposes only. It should be used in line with your own trading strategy, risk management, and discretion. Past performance is not indicative of future results. This script is designed for price action, market structure, and order block analysis on TradingView. It includes: Buy & Sell Signals (CE/SE) – Highlights potential entries based on market structure breaks and trend changes. Mini triangles or markers indicate possible reversals. Zero Lag SMA (ZSMA) – Smooths price action for trend confirmation without delay. Helps identify trend direction and support/resistance areas. Order Blocks (OBs) – Highlights key Bullish (Bu-OB) and Bearish (Be-OB) order blocks on the chart. Boxes dynamically extend as price evolves and include tiny labels (Bu-OB, Be-BB, MM, etc.) for clarity. Zigzag Market Structure – Draws swing highs and lows to visualize market structure breaks (MSB). How it works: OB boxes extend automatically and change when price breaks them. CE/SE markers help identify high-probability trade entries. ZSMA confirms trend direction. Alerts can be set for MSB changes or when price enters an OB zone.
Indicatore Pine Script®
di UltimateFlow
CongTrader Strategy V1📈 CongTrader Strategy V1 — Official Overview CongTrader Strategy V1 is a precision-built algorithm designed for intraday and swing traders who want a structured, rules-driven approach to capturing directional momentum while avoiding low-quality market conditions. This strategy combines volatility-based logic, trend confirmation filters, and a market-conditioning engine to produce high-probability long and short signals with strictly candle-close confirmed entries (no intrabar repainting). 🔍 Core Philosophy Modern markets move in bursts of volatility that are often preceded by subtle shifts in momentum and structure. CongTrader V1 is engineered to: identify emerging directional pressure early filter out noise, consolidation, and choppy environments only execute when multiple conditions align maintain consistent, disciplined trade management The result is a strategy that aims to trade quality over quantity, focusing on clear, structured setups rather than impulsive, intrabar signals. 🧠 Key Components (High-Level Explanation) 1️⃣ Directional Signal Engine (Trigger System) The strategy uses a custom momentum-oscillation model to detect potential turning points and trend continuations. This engine smooths price action, measures pressure extremes, and generates trigger crossovers that signal potential long or short opportunities. (The exact formula and coefficients are proprietary and not displayed.) 2️⃣ ATR-Based Risk Management Each trade is automatically paired with: a volatility-adaptive stop loss, and a volatility-adaptive profit target This allows the strategy to adjust position management dynamically based on current market movement rather than fixed pip or dollar distances. 3️⃣ Trend Confirmation Filter (EMA) A long-term EMA trend filter prevents counter-trend entries by ensuring: Long positions trade only above trend Short positions trade only below trend This keeps signals aligned with higher-timeframe momentum. 4️⃣ VWAP Institutional Bias Filter VWAP is used as a dynamic market fair-value reference. The strategy only trades when price action shows favorable positioning relative to VWAP—helping avoid false moves and mean-reversion traps. 5️⃣ Range & Volatility Filter A volatility/range filter avoids entering during tight consolidations. If the market is not moving or lacks range expansion, the strategy waits patiently. This significantly reduces chop and whipsaw trades. 6️⃣ RTH (Regular Trading Hours) Protection Optionally limits trades to regular exchange hours for traders who avoid low-liquidity overnight sessions. ⏳ Candle-Close Entry Confirmation (No Repainting) All entries are strictly confirmed after the bar closes, which means: No intrabar fakeouts No signal disappearance No repainting Cleaner, more realistic backtesting This ensures the strategy behaves the same in backtests and in live charts. 🎯 Trade Logic Summary A trade is only taken when: ✔ A directional trigger signal occurs ✔ Price meets VWAP bias conditions ✔ Price aligns with the long-term trend ✔ Sufficient volatility/range is present ✔ (Optional) Within regular trading hours ✔ The candle has fully confirmed Every trade is managed automatically with ATR-based stop loss and take profit placement. 📊 Who This Strategy Is For CongTrader V1 works well for: Intraday traders (1–15m) Swing traders (30m–4h) Momentum and trend-followers Algorithmic traders looking for disciplined, rules-based entries Traders who want cleaner signals and less noise Anyone who wants to avoid low-quality, choppy markets 🔔 Alerts Included Built-in alerts notify you instantly when conditions for long or short entries are met, making it suitable for: Manual execution Automated trading systems Signal services 🧩 Important Note This strategy is designed for educational purposes and is not financial advice. Performance may vary depending on market conditions, broker feed, and instrument volatility. Always backtest thoroughly and use risk management.
Strategia Pine Script®
di CongTrader
Fair Value Gaps - Cucaracha📘 Fair Value Gaps (FVG) – Clean, Automatic Detection & Real-Time Tracking The Fair Value Gaps (FVG) indicator automatically detects and visualizes Bullish and Bearish Fair Value Gaps directly on your chart. Built with precision, it highlights imbalance zones, continuously extends them in real time, and removes them the moment they’re mitigated — giving you a clean and accurate market structure view. ✅ Key Features Automatic FVG Detection Identifies bullish and bearish FVGs using a strict 3-candle imbalance model. Dynamic Boxes Each detected FVG is drawn as a shaded box and extends forward until price fills or mitigates the zone. Auto-Cleanup (Mitigation Logic) When price returns to the gap and fills it, the zone is instantly removed, keeping your chart clean and focused. Custom Colors Choose your own colors for bullish and bearish FVG boxes. 🎯 Why Traders Use This Fair Value Gaps are widely used in: Smart Money Concepts (SMC) ICT-style trading Market imbalance analysis They highlight areas where price moved aggressively and may later return to rebalance. This indicator helps you: Spot institutional imbalances instantly Track unmitigated FVGs without manually drawing boxes Stay focused on key reaction zones Improve entries based on premium/discount and liquidity concepts 🧠 How It Works Bullish FVG: Occurs when price leaves a gap where low > high , creating an upward imbalance zone. Bearish FVG: Occurs when high < low , indicating a downward imbalance zone. Detected gaps are plotted as forward-extending boxes until price mitigates them. Once mitigated (price fills the gap), the zone is automatically removed. 🟦🟥 Visuals Blue (or your chosen color): Bullish FVG Red (or your chosen color): Bearish FVG
Indicatore Pine Script®
di LaCucaracha100x
Cognex Fibonacci Breakout StrategyTHE COMPLETE TRADE LOGIC (What We Want): Step 1: Morning Session (9:30-10:30) Track session high and low Step 2: After 10:30 - Wait for Breakout Bullish: Close above session high Bearish: Close below session low Step 3: Track Extreme After Breakout Keep updating highest_after_breakout or lowest_after_breakout This continuously updates as price makes new extremes Step 4: Detect 28% Retracement (THE LOCK) When price retraces to 28%, set last_extreme_for_retracement to the current extreme This LOCKS the extreme for fibonacci calculations fib_100 should use this locked value Step 5: Place Limit Order EARLY (at 20% retracement) When price retraces to 20%, place limit order at 28% entry This is so the order is ready when price hits 28% Step 6: Cancel & Recalculate if New Extreme If price makes a NEW extreme AFTER the order is placed Cancel the old order Wait for new 20% retracement to place new order Step 7: One Trade Per Day Only ONE order placement attempt per day Even if cancelled, don't try again
Strategia Pine Script®
di Dexea2019
Reversal Trend Identifier (Reversal Colors)Hello TradingView Community! This is an indicator designed to help traders identify potential trend reversals and visualize the current market trend through intuitive bar coloring. The Bar Coloring Logic The main feature of this indicator is its unique bar coloring system, which helps you instantly see the market state: 🟥 Red Bar: Signals a new bullish reversal. This appears on the exact bar that the price crosses above the Bull Trend Line, indicating a fresh potential uptrend. 🟦 Dark Blue Bar: Signals a bullish trend continuation. These bars appear after a red bar, showing that the price remains in a bullish state. 🟨 Yellow Bar: Signals a new bearish reversal. This appears on the exact bar that the price crosses below the Bear Trend Line, indicating a fresh potential downtrend. 📉 Light Blue Bar: Signals a bearish trend continuation. These bars appear after a yellow bar, showing that the price remains in a bearish state. How to Use It Look for Red or Yellow bars as potential entry signals for a new trend. Use the Dark Blue or Light Blue bars to confirm that the trend is still active. You can also enable the "Bull Trend Line" and "Bear Trend Line" in the settings to use them as dynamic support or resistance levels. Settings Barcolor: (Default On) Easily toggle the bar coloring on or off. Show Trend Lines : (Default Off) The lines are hidden by default to keep your chart clean. You can check this box to make them visible. This script was converted from a strategy to a standalone indicator for cleaner chart analysis. As with any tool, it works best when combined with other forms of analysis and your own trading strategy. Hope you find it useful! Disclaimer: This is not financial advice. Please test any indicator or strategy thoroughly before trading.
Indicatore Pine Script®
di RealMrStrange
1
RubberBand Scalp NQ Strategy (V6 - High PF Focus) ================================================================================ RUBBERBAND SCALP NQ (V6 - HIGH PF FOCUS) ================================================================================ // STRATEGY OVERVIEW // ----------------- // Instrument: NQ (Nasdaq 100 E-mini Futures) // Style: Intraday mean-reversion scalping // Core Idea: Price "stretches" away from VWAP, then "snaps back" → enter on strong reversal // Session: 9:00 AM – 2:30 PM CST (America/Chicago) // Timeframe: 1–5 min (ideal: 2–3 min) // Position: 2 contracts, pyramiding = 0 // Commission: $2.00 per contract // Goal: High Profit Factor via asymmetric exits (1R fixed + unlimited runner) // KEY FILTERS // ----------- // • Only trade when ATR(15) > 5.0 points (~$100 range) → avoids chop // • Must be in session → forces flat at 2:30 PM // • VWAP proximity: price must touch within 0.5 × ATR of VWAP // ENTRY LOGIC (LONG) // ----------------- // 1. In session & no position // 2. Close > Open (bullish bar) // 3. Close > highest high of last 4 bars → momentum confirmation // 4. Close > VWAP // 5. Low < VWAP + (0.5 × ATR) → pullback reached VWAP zone // 6. ATR > 5.0 // 7. Bar confirmed // → Plot green triangle below bar // ENTRY LOGIC (SHORT) – Symmetric // ----------------- // 1. Close < Open // 2. Close < lowest low of last 4 bars // 3. Close < VWAP // 4. High > VWAP - (0.5 × ATR) // 5. ATR > 5.0 // → Plot red triangle above bar // STOP LOSS – DUAL SYSTEM (Widest Stop Wins) // ----------------------------------------- // VWAP Stop (Long): VWAP - 0.20 // ATR Stop (Long): Close - min(ATR × 1.0, 15.0) // Final Stop: MAX(VWAP Stop, ATR Stop) → then CAP at Close - 0.20 // Short: MIN of both → FLOOR at Close + 0.20 // → Max buffer: 0.20 pts = $20 (4 ticks) // → Risk = |Entry – Final Stop| // PROFIT TAKING – 2 CONTRACTS // --------------------------- // Contract #1: Fixed 1R → limit = entry + risk (long) / entry - risk (short) // Contract #2: Trailing stop only → trail_points = risk, trail_offset = 0 // NO FIXED TAKE PROFIT ON RUNNER → lets 3R, 5R, 10R+ winners run // BUG: Short runner uses trail_offset = 1.5 → CHANGE TO 0 // V6 IMPROVEMENTS // --------------- // 1. ATR_STOP_MULTIPLIER reduced from 1.5 → 1.0 → tighter average loss // 2. Removed fixed 2R cap on runner → unlimited upside // 3. Widest-stop logic → prevents premature stop-outs // TRADE EXAMPLE (LONG) // ------------------- // Entry: 18,125 (2 contracts) // Stop: 18,110 → Risk = $300/contract // 1R: 18,155 → Contract #1 exits (+$600) // Runner trails by $300 → exits at 18,425 (+$6,000) // Total P&L: +$6,600 // PERFORMANCE EXPECTATIONS // ------------------------ // Win Rate: 40–50% // Avg Winner: >3× avg loser // Profit Factor: 2.0–3.5+ // Max Drawdown: <5% (with risk controls) // DAILY CHECKLIST // --------------- // 2–3 min NQ chart // Timezone: America/Chicago // ATR > 5.0 // Price touched VWAP zone // 4-bar breakout confirmed // trail_offset = 0 (both sides) // Alerts on // Log R-multiple // FINAL NOTES // ----------- // This is a PROFIT FACTOR system — not a high win-rate system. // Success = discipline + volatility + clean execution. ================================================================================
Strategia Pine Script®
di mattkelly914
SP500 Session Gap Fade StrategySummary in one paragraph SPX Session Gap Fade is an intraday gap fade strategy for index futures, designed around regular cash sessions on five minute charts. It helps you participate only when there is a full overnight or pre session gap and a valid intraday session window, instead of trading every open. The original part is the gap distance engine which anchors both stop and optional target to the previous session reference close at a configurable flat time, so every trade’s risk scales with the actual gap size rather than a fixed tick stop. Scope and intent • Markets. Primarily index futures such as ES, NQ, YM, and liquid index CFDs that exhibit overnight gaps and regular cash hours. • Timeframes. Intraday timeframes from one minute to fifteen minutes. Default usage is five minute bars. • Default demo used in the publication. Symbol CME:ES1! on a five minute chart. • Purpose. Provide a simple, transparent way to trade opening gaps with a session anchored risk model and forced flat exit so you are not holding into the last part of the session. • Limits. This is a strategy. Orders are simulated on standard candles only. Originality and usefulness • Unique concept or fusion. The core novelty is the combination of a strict “full gap” entry condition with a session anchored reference close and a gap distance based TP and SL engine. The stop and optional target are symmetric multiples of the actual gap distance from the previous session’s flat close, rather than fixed ticks. • Failure mode it addresses. Fixed sized stops do not scale when gaps are unusually small or unusually large, which can either under risk or over risk the account. The session flat logic also reduces the chance of holding residual positions into late session liquidity and news. • Testability. All key pieces are explicit in the Inputs: session window, minutes before session end, whether to use gap exits, whether TP or SL are active, and whether to allow candle based closes and forced flat. You can toggle each component and see how it changes entries and exits. • Portable yardstick. The main unit is the absolute price gap between the entry bar open and the previous session reference close. tp_mult and sl_mult are multiples of that gap, which makes the risk model portable across contracts and volatility regimes. Method overview in plain language The strategy first defines a trading session using exchange time, for example 08:30 to 15:30 for ES day hours. It also defines a “flat” time a fixed number of minutes before session end. At the flat bar, any open position is closed and the bar’s close price is stored as the reference close for the next session. Inside the session, the strategy looks for a full gap bar relative to the prior bar: a gap down where today’s high is below yesterday’s low, or a gap up where today’s low is above yesterday’s high. A full gap down generates a long entry; a full gap up generates a short entry. If the gap risk engine is enabled and a valid reference close exists, the strategy measures the distance between the entry bar open and that reference close. It then sets a stop and optional target as configurable multiples of that gap distance and manages them with strategy.exit. Additional exits can be triggered by a candle color flip or by the forced flat time. Base measures • Range basis. The main unit is the absolute difference between the current entry bar open and the stored reference close from the previous session flat bar. That value is used as a “gap unit” and scaled by tp_mult and sl_mult to build the target and stop. Components • Component one: Gap Direction. Detects full gap up or full gap down by comparing the current high and low to the previous bar’s high and low. Gap down signals a long fade, gap up signals a short fade. There is no smoothing; it is a strict structural condition. • Component two: Session Window. Only allows entries when the current time is within the configured session window. It also defines a flat time before the session end where positions are forced flat and the reference close is updated. • Component three: Gap Distance Risk Engine. Computes the absolute distance between the entry open and the stored reference close. The stop and optional target are placed as entry ± gap_distance × multiplier so that risk scales with gap size. • Optional component: Candle Exit. If enabled, a bullish bar closes short positions and a bearish bar closes long positions, which can shorten holding time when price reverses quickly inside the session. • Session windows. Session logic uses the exchange time of the chart symbol. When changing symbols or venues, verify that the session time string still matches the new instrument’s cash hours. Fusion rule All gates are hard conditions rather than weighted scores. A trade can only open if the session window is active and the full gap condition is true. The gap distance engine only activates if a valid reference close exists and use_gap_risk is on. TP and SL are controlled by separate booleans so you can use SL only, TP only, or both. Long and short are symmetric by construction: long trades fade full gap downs, short trades fade full gap ups with mirrored TP and SL logic. Signal rule • Long entry. Inside the active session, when the current bar shows a full gap down relative to the previous bar (current high below prior low), the strategy opens a long position. If the gap risk engine is active, it places a gap based stop below the entry and an optional target above it. • Short entry. Inside the active session, when the current bar shows a full gap up relative to the previous bar (current low above prior high), the strategy opens a short position. If the gap risk engine is active, it places a gap based stop above the entry and an optional target below it. • Forced flat. At the configured flat time before session end, any open position is closed and the close price of that bar becomes the new reference close for the following session. • Candle based exit. If enabled, a bearish bar closes longs, and a bullish bar closes shorts, regardless of where TP or SL sit, as long as a position is open. What you will see on the chart • Markers on entry bars. Standard strategy entry markers labeled “long” and “short” on the gap bars where trades open. • Exit markers. Standard exit markers on bars where either the gap stop or target are hit, or where a candle exit or forced flat close occurs. Exit IDs “long_gap” and “short_gap” label gap based exits. • Reference levels. Horizontal lines for the current long TP, long SL, short TP, and short SL while a position is open and the gap engine is enabled. They update when a new trade opens and disappear when flat. • Session background. This version does not add background shading for the session; session logic runs internally based on time. • No on chart table. All decisions are visible through orders and exit levels. Use the Strategy Tester for performance metrics. Inputs with guidance Session Settings • Trading session (sess). Session window in exchange time. Typical value uses the regular cash session for each contract, for example “0830-1530” for ES. Adjust if your broker or symbol uses different hours. • Minutes before session end to force exit (flat_before_min). Minutes before the session end where positions are forced flat and the reference close is stored. Typical range is 15 to 120. Raising it closes trades earlier in the day; lowering it allows trades later in the session. Gap Risk • Enable gap based TP/SL (use_gap_risk). Master switch for the gap distance exit engine. Turning it off keeps entries and forced flat logic but removes automatic TP and SL placement. • Use TP limit from gap (use_gap_tp). Enables gap based profit targets. Typical values are true for structured exits or false if you want to manage exits manually and only keep a stop. • Use SL stop from gap (use_gap_sl). Enables gap based stop losses. This should normally remain true so that each trade has a defined initial risk in ticks. • TP multiplier of gap distance (tp_mult). Multiplier applied to the gap distance for the target. Typical range is 0.5 to 2.0. Raising it places the target further away and reduces hit frequency. • SL multiplier of gap distance (sl_mult). Multiplier applied to the gap distance for the stop. Typical range is 0.5 to 2.0. Raising it widens the stop and increases risk per trade; lowering it tightens the stop and may increase the number of small losses. Exit Controls • Exit with candle logic (use_candle_exit). If true, closes shorts on bullish candles and longs on bearish candles. Useful when you want to react to intraday reversal bars even if TP or SL have not been reached. • Force flat before session end (use_forced_flat). If true, guarantees you are flat by the configured flat time and updates the reference close. Turn this off only if you understand the impact on overnight risk. Filters There is no separate trend or volatility filter in this version. All trades depend on the presence of a full gap bar inside the session. If you need extra filtering such as ATR, volume, or higher timeframe bias, they should be added explicitly and documented in your own fork. Usage recipes Intraday conservative gap fade • Timeframe. Five minute chart on ES regular session. • Gap risk. use_gap_risk = true, use_gap_tp = true, use_gap_sl = true. • Multipliers. tp_mult around 0.7 to 1.0 and sl_mult around 1.0. • Exits. use_candle_exit = false, use_forced_flat = true. Focus on the structured TP and SL around the gap. Intraday aggressive gap fade • Timeframe. Five minute chart. • Gap risk. use_gap_risk = true, use_gap_tp = false, use_gap_sl = true. • Multipliers. sl_mult around 0.7 to 1.0. • Exits. use_candle_exit = true, use_forced_flat = true. Entries fade full gaps, stops are tight, and candle color flips flatten trades early. Higher timeframe gap tests • Timeframe. Fifteen minute or sixty minute charts on instruments with regular gaps. • Gap risk. Keep use_gap_risk = true. Consider slightly higher sl_mult if gaps are structurally wider on the higher timeframe. • Note. Expect fewer trades and be careful with sample size; multi year data is recommended. Properties visible in this publication • On average our risk for each position over the last 200 trades is 0.4% with a max intraday loss of 1.5% of the total equity in this case of 100k $ with 1 contract ES. For other assets, recalculations and customizations has to be applied. • Initial capital. 100 000. • Base currency. USD. • Default order size method. Fixed with size 1 contract. • Pyramiding. 0. • Commission. Flat 2 USD per order in the Strategy Tester Properties. (2$ buying + 2$selling) • Slippage. One tick in the Strategy Tester Properties. • Process orders on close. ON. Realism and responsible publication • No performance claims are made. Past results do not guarantee future outcomes. • Costs use a realistic flat commission and one tick of slippage per trade for ES class futures. • Default sizing with one contract on a 100 000 reference account targets modest per trade risk. In practice, extreme slippage or gap through events can exceed this, so treat the one and a half percent risk target as a design goal, not a guarantee. • All orders are simulated on standard candles. Shapes can move while a bar is forming and settle on bar close. Honest limitations and failure modes • Economic releases, thin liquidity, and limit conditions can break the assumptions behind the simple gap model and lead to slippage or skipped fills. • Symbols with very frequent or very large gaps may require adjusted multipliers or alternative risk handling, especially in high volatility regimes. • Very quiet periods without clean gaps will produce few or no trades. This is expected behavior, not a bug. • Session windows follow the exchange time of the chart. Always confirm that the configured session matches the symbol. • When both the stop and target lie inside the same bar’s range, the TradingView engine decides which is hit first based on its internal intrabar assumptions. Without bar magnifier, tie handling is approximate. Legal Education and research only. This strategy is not investment advice. You remain responsible for all trading decisions. Always test on historical data and in simulation with realistic costs before considering any live use.
Strategia Pine Script®
di exlux
2
ETH SuperTrend Hull Strategy - 15min Futures(重制版)🟠 ETH SuperTrend Hull Strategy - 15min Futures Strategy Overview The "ETH SuperTrend Hull Strategy" is a sophisticated 15-minute trading system specifically designed for Bitcoin perpetual contracts. This advanced algorithm integrates SuperTrend indicators with Hull moving averages to deliver high-precision trend following through a triple-confirmation mechanism, featuring intelligent position management and multi-level take-profit systems. Core Value Proposition Triple Trend Confirmation: SuperTrend + Hull MA + ATR volatility filtering Adaptive Take-Profit System: 6-level dynamic profit targets adjusted to market conditions Smart Position Management: Three martingale modes with automatic sizing Real-time Webhook Integration: Direct exchange connectivity for automated execution 🟠 Technical Framework Multi-Layer Trend Detection Layer 1 - SuperTrend Filter pinescript = ta.supertrend(supertrend_factor, supertrend_atr_period) is_supertrend_long = direction < 0 // Bullish trend line is_supertrend_short = direction >= 0 // Bearish trend line Layer 2 - Hull MA Confirmation pinescript HMA = HMA(close, 73) // Hull Moving Average hull_is_green = HULL > HULL // Uptrend confirmation hull_is_red = HULL <= HULL // Downtrend confirmation Layer 3 - ATR Breakout Signals pinescript xATR = ta.atr(5) nLoss = key_value * xATR // Dynamic stop distance Entry Conditions Long Entry: Price breaks above ATR trailing stop Hull MA shows green uptrend SuperTrend indicates bullish momentum Price positioned above Hull MA Short Entry: Price breaks below ATR trailing stop Hull MA shows red downtrend SuperTrend indicates bearish momentum Price positioned below Hull MA 🟠 Risk Management System Position Sizing text Base Position = Initial Capital × Risk % / Entry Price × Leverage Actual Position = Base Position × Martingale Multiplier (1.0-5.0x) Martingale Modes 4x Mode: Conservative approach, maximum 4x position scaling 5x Mode: Balanced risk management, maximum 5x scaling 5x Big Mode: Aggressive growth with faster position increases Dynamic Take-Profit System 6-Level Profit Targets: TP1: 2.2×ATR (Close 30%) TP2: 4.5×ATR (Close 25%) TP3: 7.5×ATR (Close 20%) TP4: 10.5×ATR (Close 10%) TP5: 15.5×ATR (Close 7%) TP6: 20.5×ATR (Close 3%) ATR Adaptive Adjustment: Short-term ATR > Long-term ATR: TP distance +0.5 Short-term ATR < Long-term ATR: TP distance -0.5 🟠 Configuration Parameters Core Settings pinescript // Trend Sensitivity key_value = 2.0 // ATR multiplier (lower = more sensitive) supertrend_factor = 3.0 // SuperTrend factor // Risk Management risk_percent = 19.9 // Per trade risk % leverage = 1.0 // Leverage multiplier Hull MA Configuration pinescript length = 73 // Hull period (55-200) modeSwitch = "Hma" // Hull variant (Hma/Thma/Ehma) 🟠 Quick Start Guide Initial Setup Apply to BTCUSDT perpetual 15-minute chart Configure Webhook Signal ID and User ID Adjust position parameters according to risk preference Signal Monitoring Long Signals: Green arrows with Hull MA turning green Short Signals: Red arrows with Hull MA turning red Trend Direction: SuperTrend line color changes Execution Workflow Wait for triple-signal confluence Confirm all entry conditions met System automatically calculates position size and TP levels Webhook sends trade instructions to connected platform Advanced Features Heikin-Ashi Mode: Smooth price data using Heikin-Ashi candles Fixed Position Mode: Disable martingale, use fixed sizing Multi-Timeframe: Higher timeframe confirmation integration 🟠 ETH SuperTrend Hull Strategy - 15min Futures 策略概述 "ETH超级趋势Hull策略"是一款专为比特币永续合约设计的15分钟短线交易系统。该策略融合超级趋势指标与Hull均线，通过三重过滤机制实现高精度趋势跟踪，具备智能仓位管理和多级止盈体系。 核心价值 三重趋势确认：Supertrend + Hull均线 + ATR波动过滤 自适应止盈系统：6级动态止盈，根据市场波动调整目标 智能仓位管理：支持三种倍投模式，自动调整仓位规模 实时Webhook通知：直连交易平台，实现自动化执行 🟠 策略原理 趋势识别系统 第一层 - 超级趋势过滤 pinescript = ta.supertrend(supertrend_factor, supertrend_atr_period) is_supertrend_long = direction < 0 // 绿色趋势线 is_supertrend_short = direction >= 0 // 红色趋势线 第二层 - Hull均线确认 pinescript HMA = HMA(close, 73) // Hull移动平均线 hull_is_green = HULL > HULL // 上升趋势 hull_is_red = HULL <= HULL // 下降趋势 第三层 - ATR突破信号 pinescript xATR = ta.atr(5) nLoss = key_value * xATR // 动态止损距离 入场条件 多头入场： 价格突破ATR追踪止损 Hull均线呈绿色上升趋势 超级趋势显示看涨信号 价格位于Hull均线上方 空头入场： 价格跌破ATR追踪止损 Hull均线呈红色下降趋势 超级趋势显示看跌信号 价格位于Hull均线下方 🟠 风险管理 仓位计算 text 基础仓位 = 初始资金 × 风险比例% / 入场价格 × 杠杆倍数 实际仓位 = 基础仓位 × 倍投系数 (1.0-5.0倍) 倍投模式 4倍模式：保守型，最大4倍加仓 5倍模式：均衡型，最大5倍加仓 5倍大模式：激进型，更快仓位增长 动态止盈系统 6级止盈目标： TP1: 2.2×ATR (平仓30%) TP2: 4.5×ATR (平仓25%) TP3: 7.5×ATR (平仓20%) TP4: 10.5×ATR (平仓10%) TP5: 15.5×ATR (平仓7%) TP6: 20.5×ATR (平仓3%) ATR自适应调整： 短期ATR > 长期ATR：止盈距离+0.5 短期ATR < 长期ATR：止盈距离-0.5 🟠 参数配置 核心参数 pinescript // 趋势敏感度 key_value = 2.0 // ATR乘数，值越小越敏感 supertrend_factor = 3.0 // 超级趋势因子 // 风险管理 risk_percent = 19.9 // 单次交易风险% leverage = 1.0 // 杠杆倍数 Hull均线设置 pinescript length = 73 // Hull周期 (55-200) modeSwitch = "Hma" // Hull变体 (Hma/Thma/Ehma) 🟠 使用指南 初始设置 添加到BTCUSDT永续合约15分钟图表 配置Webhook信号ID和用户ID 根据风险偏好调整仓位参数 信号监控 多单信号：绿色箭头，Hull均线转绿 空单信号：红色箭头，Hull均线转红 趋势方向：超级趋势线颜色变化 执行流程 等待三重信号共振 确认入场条件满足 系统自动计算仓位和止盈 通过Webhook发送交易指令 高级功能 K线均线模式：使用Heikin-Ashi平滑价格 固定仓位模式：禁用倍投，固定仓位大小 多时间框架：集成更高时间框架确认
Strategia Pine Script®
di AI-996NB
Structure Pilot - Z&Z [Wang Indicators]Structure Pilot Zone & Zil is a complete suite of structure driven features that's build around pattern that can be visible around any timeframe. Built in collaboration with Dave Teaches, All these tools were shaped and combined together as the only toolkit Structure & DTFX traders want to have ! ▫️ Structures & Zones ▫️ Zones are drawn when a break of structure (new high or low being created) or a market reversal happens. It will highlight the last valid down move before a new high for bullish zones and the last valid up move before a new low for bearish zones. These zones are used to analyze the market trend and to make entries into the market trend once the price retraces into these zones. For example, with the latest bullish zones drawn in green for LTF zones and in blue for HTF zones, when the price retraces into this zone, there is a strong probability that the price will turn around to provide a buying opportunity all the way to the top of the zone or even higher. These buying opportunities generally occur at specific retracement levels in the 30%, 50% and 70% zones, automatically represented by broken lines in the zones when they are created. Example with bullish zones : The aim with these zones is to find places on the chart where it's best to buy or sell, in order to take the biggest possible move while minimizing your risk. Indeed, if the price is rising and a bullish zone has been created, I don't want to buy on the highs, preferring to wait for a retracement in my bullish zone to buy lower and reduce my risk, as the invalidation of the current trend will be found below the last protected low under the bullish zone drawn in blue for the HTF and in green for the LTF. Conversely, if the price is falling and a bearish zone has been created, I don't want to sell at the bottom. I'd rather wait for a retracement in the bearish zone to sell higher and reduce my risk, as the invalidation of the current trend will this time be above the last protected high above the bearish zone drawn in orange for the HTF and red for the LTF. Example with bearish zones : When it comes to market structure, it's good to know that zones recur within the same trend at a frequency of between 3 and 6 before there's a trend reversal. So, after a certain number of successive zones, you can expect a reversal or the last protected high or low to be breached. The indicator automatically counts the number of successive zones, so you can keep track of the market and avoid surprises. The zones are generated through the structure length. It can be increased to display larger (and more important) zones. As we recommend keeping the default value (20) for new traders, experienced traders will find some success with other settings depending on their strategies. Structure Pilot also provides auto HTF Zones, which is particularly useful to have a macro vision of the market. Settings: Swing types: Bullish only, Bearish only, both, or none Structure length Swing count: useful when it comes to tracking Trend strenght in any given time frame Show Zones: Display boxes with 30%, 50%, and 70% fibs Show HTF Zones: Display HTF zones with the same retracement configuration as the regular zones Show 30%, 50% and 70%: Enable/disable these options to show or hide the corresponding fibs. Box visibility, Line width & Line style: Style configuration for the zone All settings can be activated or deactivated in the indicator parameters to suit individual needs and preferences. 30% Level : This is often considered a shallow retracement. If prices pull back to this level after an uptrend and flip in a lower timeframe, traders might view it as a strong sign of continued bullish momentum. Conversely, after a downtrend, this level could act as a temporary resistance where sellers might re-enter after a flip in a lower timeframe. 50% Level : This level is seen as a balance point or midpoint in the price move. A retracement to 50% can indicate a strong trend change or continuation. 70% Level : A retracement this deep can signal that the market might be losing steam or that the previous trend could be weakening. If the price bounces off this level, it might suggest that the trend is still in control but needed a more significant correction before moving further in its original direction. We as structure traders prefer to take entry out of The 50% or when price retrace past it there will be something at the level i'm looking for price to reverse from either some specific candles or imbalances. Advanced traders might combine these levels with other tools or chart patterns that we bundle in this indicator. ▫️ ZIL ▫️ The ZIL Indicator is designed to automate the process of identifying key structural levels in the market and applying Fibonacci retracements when a significant price break occurs. The indicator detects when a market structure (high or low) is broken and a candle closes below the previous low or above the previous high, indicating a potential trend shift or continuation. • Tracks the break of structural lows or highs and waits for a confirmation candle that closes above or bellow the candle that set the new low. Automated Fibonacci Retracement: • Once the structure break is confirmed, the indicator automatically plots a Fibonacci retracement between: • The high of the last bullish move (before the new low is set) or the low of the last bearish move (before the new high is set) • The newly formed low after the structure break or the newly formed high after the structure break Fibonacci levels plotted with colors : • -0.27 : Dark red - Stop loss • 0 : white - The new high/low - Potential entry • 0.3, Orange 0.5, Light green 0.7: Green : Levels - Partial and take profit zones • 1.15 pale blue - for your runner We may long the retracement when the price is comming from a bearish zone using the ZIL to manage Example : Multi-Timeframe Support: • Using the option "HTF ZIL" will display ZIL on higher timeframe (corresponding to the HTF Zones) on your charts to help traders find structural breaks and Fibonacci setups in both short-term and long-term markets. HTF ZIL is really usefull to manage trades if the regular ZIL target get ran through Wang use case : HTF zill level are used when the small zill get ran through ▫️ Opening Range Tracker ▫️ The Opening Range Tracker is designed to help traders identify and track the opening range of a specified time period, specifically starting with the 144-minute candle between 8:24 AM and 10:48 AM. (default value) The indicator highlights this range and automatically plots key levels (30%, 50%, 70%) to provide potential strong reaction areas for trading. The time period for the opening range is fully customizable, allowing users to adjust it according to their strategy. Opening range should be seen and used as a classic zone. If we trade above or below it price tend to come back into it and bounce of of the One or multiple level... classic 30/50/70. • Customizable Opening Range: Adapt the indicator to any market or session by changing the opening range time window. • Precise Levels for Trading: The 30%, 50%, and 70% levels provide key zones where price may react, helping traders define entries, exits, or stop loss placements. • Visual Clarity: The range box and levels make it easy to see the important price areas during the opening range and the rest of the trading session. If we range a lot in the opening range, we may range for the rest of the day. We should keep that in mind to avoid taking wrong decisions. its basically a large zone that's we have seen often time price rejects from the level in it Daily Reset: Each trading day resets the opening range, giving traders fresh data and new opportunities to capitalize on market movements. Structure Pilot is built for beginner and experienced. It provides the tools to the traders that want to learn, understand, and trade efficiently within the principles of structure trading. ▫️ Alerts▫️ Alerts can be configured to these events : New Swing / HTF Swing Trend Change Zil attached to a zone/HTF zone Price cross 30/50/70 zones levels Trend change and align the HTF/LTF trend On cross partial (50%) and take profit (70%) ZIL and HTF ZIL On cross Zil can now be configured for Bull or Bear zone On HTF ZIL when 30% is crossed
Indicatore Pine Script®
di MrWangTactics
SYNX MASTER**Private Indicator — Invite Only** **@TrenchFather ** --- ## ADD TO CHART (30 SECONDS) 1. Open **TradingView** 2. Search: `Ultimate Easy Trader Pro` 3. Click → **"Add to Chart"** Done. You’re live. --- ## WHAT YOU SEE | Signal | Color | Meaning | |--------|-------|--------| | **BULL WICKLESS** | Green label ↑ | Strong up candle in trend | | **BEAR WICKLESS** | Red label ↓ | Strong down candle in trend | | **BUY (1:1)** | Green label | **ENTER LONG NOW** | | **SELL (1:1)** | Red label | **ENTER SHORT NOW** | | **Green Line** | Horizontal | Bull retrace zone | | **Red Line** | Horizontal | Bear retrace zone | | **Red Dashed** | Line | **STOP LOSS** | | **Lime Dashed** | Line | **TAKE PROFIT (1:2 RR)** | | **Box** | Green/Red | Full trade plan | --- ## YOUR RULES (FOLLOW OR LOSE) ### LONG 1. See **"BULL WICKLESS"** → **Wait** 2. Price drops to **GREEN LINE** 3. See **"BUY (1:1)"** → **ENTER LONG** 4. **SL** = Red dashed **TP** = Lime dashed ### SHORT 1. See **"BEAR WICKLESS"** → **Wait** 2. Price rises to **RED LINE** 3. See **"SELL (1:1)"** → **ENTER SHORT** 4. **SL** = Red dashed **TP** = Lime dashed --- ## BEST TIMEFRAMES | TF | Use | |----|-----| | **15m** | Scalp | | **1H** | Swing *(best)* | | **4H** | Hold | --- ## BEST PAIRS - **BTC/USDT** - **ETH/USDT** - **EUR/USD** - **SPX500** **No shitcoins.** --- ## ALERTS (NEVER MISS) 1. Right-click chart → **"Add Alert"** 2. Pick: - `LONG ENTRY` - `SHORT ENTRY` - `Bull Wickless` - `Bear Wickless` 3. Enable **Push / Webhook** --- ## SETTINGS (DO NOT TOUCH)
Indicatore Pine Script®
di Milyanrouge