BEST Indicator for Events (XAUUSD etc)(by Mestre dos Traders)BEST Indicator for Events (XAUUSD etc...) (by Mestre dos Traders @2025)
🧠 1. Customisable Economic Event Selection
Up to 10 editable events (e.g. Retail Sales, CPI, NFP, etc.)
Manual input of Forecast, Previous, and Actual values
Event selection via a numeric selector (0 to 9)
Precise event timestamp definition (with time zone support)
⚙️ 2. Automated Analysis and Signal Logic
Intelligent processing based on comparative logic:
Actual > Forecast & Previous → SELL
Actual < Forecast & Previous → BUY
Event strength classification based on the sum of Forecast + Actual
Categories: very weak, weak, moderate, strong, very strong, hyper strong
📊 3. Multi-layered Technical Confirmations
Optional signal confirmation using:
RSI (Overbought/Oversold conditions)
Volume (Above 20-period moving average)
Pullback (Price validation after signal trigger)
🎯 4. Trade Parameters
Configurable Take Profit levels: TP1, TP2, TP3 (%)
Configurable Stop Loss (%)
Dynamic calculation of Risk/Reward ratio (R/R)
Visual plotting of entry, SL, TPs, and labels on the chart
Automated entry with optional confirmation via pullback or event strength
🕒 5. Entry Timing Window & Duration
Entry validation within a configurable time window post-event
Custom line duration setting (in minutes, auto-converted to bars)
🧾 6. Visual and Statistical Event History
Real-time tracking of:
Total number of signals per event
Number of profitable trades
Hit Rate (%) per event
Average R/R ratio per setup
Simulated capital growth over time
Current and maximum drawdown per event
Visual tables (positioned at top_right and bottom_right)
Capital progression plotted on chart
🟢 7. Professional Visual Markings
Use of labels and lines for:
Entry points (ENTRY)
Pullbacks (PULLBACK BUY/SELL)
TP1 / TP2 / TP3 hit (PROFIT)
Stop Loss hit (LOSS)
Initial trade signal with strength classification (BUY / SELL + strength)
♻️ 8. Data Reset & Reinitialisation
Reset Data button to clear all visual elements and reinitialise variables
💼 9. Capital Simulation & Performance Metrics
Configurable initial capital
Profit calculation per TP level (weighted: 1, 2 or 3)
Tracking and display of cumulative capital
Capital history stored in dynamic array
Line plot of capital evolution over time
🧩 10. Modular Code Architecture
Efficient use of:
var for persistent data across bars
array for dynamic storage and retrieval
label and line for rich visual feedback
table for performance monitoring dashboards
✅ Conclusion: Why This Script is Professional and Effective
Highly Customisable > Adaptable to any macroeconomic event
Multifactorial Analysis > Integrates both fundamental and technical data (RSI, volume, pullback)
Robust Execution Logic > Executes trades only with multiple confirmations or strong event signals
Clear Visual Feedback > Lines and labels support faster, more confident decision-making
Comprehensive Performance Metrics > Real-time statistical and graphical analysis by event
Manual Backtest-Friendly > Visual signals and historical tracking allow easy retrospective validation
Contacts:
TG.: @mestredostradersoficial
TG Support: @suportedomestretraders
Tiktok Channel: @Mestredostraders
Whatsapp Sales: +55 61 991371216
Analisi trend
BEST Indicator for R.S.M Events (by Mestre dos Traders)BEST Indicator for Events (XAUUSD etc...) (by Mestre dos Traders @2025)
🧠 1. Customisable Economic Event Selection
Up to 10 editable events (e.g. Retail Sales, CPI, NFP, etc.)
Manual input of Forecast, Previous, and Actual values
Event selection via a numeric selector (0 to 9)
Precise event timestamp definition (with time zone support)
⚙️ 2. Automated Analysis and Signal Logic
Intelligent processing based on comparative logic:
Actual > Forecast & Previous → SELL
Actual < Forecast & Previous → BUY
Event strength classification based on the sum of Forecast + Actual
Categories: very weak, weak, moderate, strong, very strong, hyper strong
📊 3. Multi-layered Technical Confirmations
Optional signal confirmation using:
RSI (Overbought/Oversold conditions)
Volume (Above 20-period moving average)
Pullback (Price validation after signal trigger)
🎯 4. Trade Parameters
Configurable Take Profit levels: TP1, TP2, TP3 (%)
Configurable Stop Loss (%)
Dynamic calculation of Risk/Reward ratio (R/R)
Visual plotting of entry, SL, TPs, and labels on the chart
Automated entry with optional confirmation via pullback or event strength
🕒 5. Entry Timing Window & Duration
Entry validation within a configurable time window post-event
Custom line duration setting (in minutes, auto-converted to bars)
🧾 6. Visual and Statistical Event History
Real-time tracking of:
Total number of signals per event
Number of profitable trades
Hit Rate (%) per event
Average R/R ratio per setup
Simulated capital growth over time
Current and maximum drawdown per event
Visual tables (positioned at top_right and bottom_right)
Capital progression plotted on chart
🟢 7. Professional Visual Markings
Use of labels and lines for:
Entry points (ENTRY)
Pullbacks (PULLBACK BUY/SELL)
TP1 / TP2 / TP3 hit (PROFIT)
Stop Loss hit (LOSS)
Initial trade signal with strength classification (BUY / SELL + strength)
♻️ 8. Data Reset & Reinitialisation
Reset Data button to clear all visual elements and reinitialise variables
💼 9. Capital Simulation & Performance Metrics
Configurable initial capital
Profit calculation per TP level (weighted: 1, 2 or 3)
Tracking and display of cumulative capital
Capital history stored in dynamic array
Line plot of capital evolution over time
🧩 10. Modular Code Architecture
Efficient use of:
var for persistent data across bars
array for dynamic storage and retrieval
label and line for rich visual feedback
table for performance monitoring dashboards
✅ Conclusion: Why This Script is Professional and Effective
Highly Customisable > Adaptable to any macroeconomic event
Multifactorial Analysis > Integrates both fundamental and technical data (RSI, volume, pullback)
Robust Execution Logic > Executes trades only with multiple confirmations or strong event signals
Clear Visual Feedback > Lines and labels support faster, more confident decision-making
Comprehensive Performance Metrics > Real-time statistical and graphical analysis by event
Manual Backtest-Friendly > Visual signals and historical tracking allow easy retrospective validation
Contacts:
TG.: @mestredostradersoficial
TG Support: @suportedomestretraders
Tiktok Channel: @Mestredostraders
Whatsapp Sales: +55 61 991371216
SQV Indicator Bridge# SQV Indicator Bridge - Quick Guide
## What is SQV Indicator Bridge?
A simple connector that validates your indicator's signals using SQV Lite before displaying them on the chart. Only high-quality signals pass through.
## How It Works
```
Your Indicator → Generates Signals → SQV Lite → Validates Quality → Bridge → Shows Only Valid Signals
```
## Quick Setup (3 Steps)
### Step 1: Prepare Your Indicator
Add these lines to export your signals:
```pinescript
// At the end of your indicator code
plot(longCondition ? 1 : 0, "Long Signal", display=display.none)
plot(shortCondition ? 1 : 0, "Short Signal", display=display.none)
```
### Step 2: Add to Chart (in order)
1. Your indicator
2. SQV Lite
3. SQV Indicator Bridge
### Step 3: Connect Sources
In Bridge settings:
- **Long Signal Source** → Select: YourIndicator: Long Signal
- **Short Signal Source** → Select: YourIndicator: Short Signal
- **SQV Long Valid** → Select: SQV Lite: SQV Long Valid
- **SQV Short Valid** → Select: SQV Lite: SQV Short Valid
- **SQV Score** → Select: SQV Lite: SQV Score
## Visual Settings
| Setting | Description | Default |
|---------|-------------|---------|
| Show Labels | Display BUY/SELL labels | On |
| Label Offset | Distance from candles (0-5 ATR) | 0 |
| Label Size | Tiny, Small, or Normal | Small |
| Long Color | Color for buy signals | Green |
| Short Color | Color for sell signals | Red |
## What You'll See
- **Green "LONG" labels** - When your buy signal passes SQV validation
- **Red "SHORT" labels** - When your sell signal passes SQV validation
- **No label** - When signal quality is too low
## Common Issues & Solutions
### No labels appearing?
1. Check "Use External Signals" is ON in SQV Lite
2. Verify source connections are correct
3. Lower minimum score in SQV Lite (try 60)
4. Test your indicator separately to ensure it generates signals
### Too many/few signals?
- Adjust "Minimum Quality Score" in SQV Lite
- Default is 65, lower for more signals, higher for fewer
### Wrong signals showing?
- Check Trading Mode in SQV Lite matches your strategy (Long Only/Short Only/Both)
## Example Integration
### Simple MA Cross Indicator
```pinescript
//@version=6
indicator("MA Cross with SQV", overlay=true)
// Your logic
fast = ta.sma(close, 20)
slow = ta.sma(close, 50)
longSignal = ta.crossover(fast, slow)
shortSignal = ta.crossunder(fast, slow)
// Plot MAs
plot(fast, color=color.blue)
plot(slow, color=color.red)
// Export for SQV Bridge (REQUIRED!)
plot(longSignal ? 1 : 0, "Long Signal", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal", display=display.none)
```
## Tips
✅ **DO**:
- Test in "Autonomous Mode" first (SQV Lite setting)
- Use clear signal names in your plots
- Keep signals binary (1 or 0)
❌ **DON'T**:
- Forget to add `display=display.none` to signal plots
- Use values other than 0 and 1 for signals
- Leave "Use External Signals" OFF in SQV Lite
## Alert Setup
1. Enable "Enable Alerts" in Bridge settings
2. Create alert on Bridge (not your indicator)
3. Alert message includes SQV score
Example alert: `"Long Signal Validated | Score: 85"`
## Complete Bridge Code
```pinescript
//@version=6
indicator("SQV Indicator Bridge", overlay=true)
// From your indicator
longSignal = input.source(close, "Long Signal Source", group="Signal Sources")
shortSignal = input.source(close, "Short Signal Source", group="Signal Sources")
// From SQV Lite
sqvLongValid = input.source(close, "SQV Long Valid", group="SQV Sources")
sqvShortValid = input.source(close, "SQV Short Valid", group="SQV Sources")
sqvScore = input.source(close, "SQV Score", group="SQV Sources")
// Settings
showLabels = input.bool(true, "Show Labels", group="Visual")
labelOffset = input.float(0.0, "Label Offset (ATR)", minval=0.0, maxval=5.0, step=0.5, group="Visual")
labelSize = input.string("small", "Label Size", options= , group="Visual")
longColor = input.color(color.green, "Long Color", group="Visual")
shortColor = input.color(color.red, "Short Color", group="Visual")
enableAlerts = input.bool(false, "Enable Alerts", group="Alerts")
// Logic
atr = ta.atr(14)
offset = labelOffset > 0 ? atr * labelOffset : 0
hasValidLong = longSignal > 0 and sqvLongValid > 0 and barstate.isconfirmed
hasValidShort = shortSignal > 0 and sqvShortValid > 0 and barstate.isconfirmed
// Show labels
if showLabels
if hasValidLong
label.new(bar_index, low - offset, "LONG",
style=label.style_label_up,
color=longColor,
textcolor=color.white,
size=labelSize == "tiny" ? size.tiny :
labelSize == "small" ? size.small : size.normal)
if hasValidShort
label.new(bar_index, high + offset, "SHORT",
style=label.style_label_down,
color=shortColor,
textcolor=color.white,
size=labelSize == "tiny" ? size.tiny :
labelSize == "small" ? size.small : size.normal)
// Alerts
if enableAlerts
if hasValidLong
alert("Long Signal Validated | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
if hasValidShort
alert("Short Signal Validated | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
```
---
**Need help?** Check the full SQV documentation or contact through TradingView messages.
TCT Alpha LevelsI didn’t build this to impress anyone.
I built it because I was done watching the market mess with me.
TCT Alpha Levels came out of those moments where price reversed 2 pips before my entry…
where signals came late… or never made sense.
I got tired of indicators that looked smart but acted stupid.
So I created something that thinks like I do - sharp, clean, no-nonsense.
It doesn’t give signals just to fill space.
It waits. It filters. It hits when it’s time - not before.
You won’t see fancy names or 15 different colors flashing on your chart.
You’ll just see confidence.
And if you’re the kind of trader who respects timing, structure, and silence before impact…
then you’ll feel exactly what I felt when I ran this for the first time.
This isn’t a tool. It’s instinct - turned into code.
🌐 Visit: www.thecreativetraders.com
Signal Quality Validator - Lite# Signal Quality Validator Lite - Technical Documentation
## Introduction
The Signal Quality Validator (SQV) Lite represents a comprehensive approach to technical signal validation, designed to evaluate trading opportunities through multi-dimensional market analysis. This indicator provides traders with objective quality assessments for their entry signals across various market conditions and timeframes.
## Core Architecture
### Component-Based Validation System
SQV Lite employs five fundamental market components, each contributing weighted scores to produce a final quality assessment. The system analyzes multiple market dimensions simultaneously to provide comprehensive signal validation.
Each component uses proprietary algorithms to evaluate specific market conditions:
- Directional bias and strength assessment
- Market participation and flow analysis
- Price acceleration patterns
- Key technical level identification
- Optimal volatility conditions
The final score represents a weighted combination of all components, with thresholds adjusted for different market conditions and timeframes.
## Scoring Methodology
### Quality Grades
- **Grade A+ (90-100)**: Exceptional setup quality with maximum component confluence
- **Grade A (80-89)**: High-quality signals suitable for full position sizing
- **Grade B (65-79)**: Acceptable signals meeting minimum validation criteria
- **Grade C (<65)**: Substandard conditions, signal rejected
### Timeframe Profiles
Pre-configured profiles optimize component weights and thresholds:
| Profile | Typical Use Case | Min/High/Perfect Scores |
|---------|------------------|------------------------|
| 1-5 min | Scalping | 60/75/85 |
| 15-30 min | Day Trading | 65/80/90 |
| 1H-4H | Intraday Swing | 70/85/95 |
| Daily+ | Position Trading | 75/88/95 |
| Custom | User Defined | Configurable |
## Integration Guide
### Standalone Usage
1. Add SQV Lite to your chart
2. Select appropriate timeframe profile
3. Monitor real-time quality grades on signal bars
4. Use dashboard for current market assessment
### Bidirectional Strategy Integration
SQV Lite supports complete two-way communication with your custom strategies, enabling sophisticated signal validation workflows.
#### Step 1: Setting Up Your Strategy to Send Signals
In your custom strategy/indicator, export your signals as plots:
```pinescript
//@version=6
indicator("My Custom Strategy", overlay=true)
// Your signal logic
longSignal = ta.crossover(ema9, ema21) // Example
shortSignal = ta.crossunder(ema9, ema21) // Example
// CRITICAL: Export signals for SQV to read
// Use display=display.none to hide the plots
plot(longSignal ? 1 : 0, "Long Signal Output", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal Output", display=display.none)
```
#### Step 2: Configure SQV Lite to Receive Signals
1. Add SQV Lite to the same chart as your strategy
2. In SQV Lite settings, enable "Use External Signals"
3. Click on "External Long Signal Source" and select your strategy's "Long Signal Output"
4. Click on "External Short Signal Source" and select your strategy's "Short Signal Output"
#### Step 3: Import SQV Validation Back to Your Strategy
Complete the bidirectional flow by importing SQV's validation results:
```pinescript
//@version=6
strategy("My Strategy with SQV Integration", overlay=true)
// Import SQV validation results
sqvScore = input.source(close, "SQV Score Source", group="SQV Integration")
sqvLongValid = input.source(close, "SQV Long Valid Source", group="SQV Integration")
sqvShortValid = input.source(close, "SQV Short Valid Source", group="SQV Integration")
sqvTradingMode = input.source(close, "SQV Trading Mode", group="SQV Integration")
// Your original signals
longSignal = ta.crossover(ema9, ema21)
shortSignal = ta.crossunder(ema9, ema21)
// Export for SQV
plot(longSignal ? 1 : 0, "Long Signal Output", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal Output", display=display.none)
// Use SQV validation in entry logic
if longSignal and sqvLongValid > 0
strategy.entry("Long", strategy.long)
// Optional: Use sqvScore for position sizing
if shortSignal and sqvShortValid > 0
strategy.entry("Short", strategy.short)
```
#### Step 4: Complete Integration Setup
After adding both scripts to your chart:
1. In your strategy settings → SQV Integration:
- Set "SQV Score Source" → Select SQV Lite: SQV Score
- Set "SQV Long Valid Source" → Select SQV Lite: SQV Long Valid
- Set "SQV Short Valid Source" → Select SQV Lite: SQV Short Valid
2. In SQV Lite settings → Signal Import:
- Enable "Use External Signals"
- Set "External Long Signal Source" → Select Your Strategy: Long Signal Output
- Set "External Short Signal Source" → Select Your Strategy: Short Signal Output
### Available Data Exports from SQV
```pinescript
// Core validation data
plot(currentTotalScore, "SQV Score", display=display.none) // 0-100
plot(sqvLongValid ? 1 : 0, "SQV Long Valid", display=display.none) // 0 or 1
plot(sqvShortValid ? 1 : 0, "SQV Short Valid", display=display.none) // 0 or 1
// Component scores for advanced usage
plot(currentTrendScore, "SQV Trend Score", display=display.none)
plot(currentVolumeScore, "SQV Volume Score", display=display.none)
plot(currentMomentumScore, "SQV Momentum Score", display=display.none)
plot(currentStructureScore, "SQV Structure Score", display=display.none)
plot(currentVolatilityScore, "SQV Volatility Score", display=display.none)
// Additional data
plot(orderFlowDelta, "SQV Order Flow Delta", display=display.none)
plot(tradingMode == "Long" ? 1 : tradingMode == "Short" ? -1 : 0, "SQV Trading Mode", display=display.none)
```
### Advanced Integration Examples
#### Example 1: Quality-Based Position Sizing
```pinescript
// In your strategy
sqvScore = input.source(close, "SQV Score Source", group="SQV Integration")
// Dynamic position sizing based on signal quality
positionSize = sqvScore >= 90 ? 3 : // A+ quality = 3 units
sqvScore >= 80 ? 2 : // A quality = 2 units
sqvScore >= 65 ? 1 : 0 // B quality = 1 unit
if longSignal and sqvLongValid > 0 and positionSize > 0
strategy.entry("Long", strategy.long, qty=positionSize)
```
#### Example 2: Filtering by Component Scores
```pinescript
// Import individual components
sqvTrend = input.source(close, "SQV Trend Score", group="SQV Integration")
sqvVolume = input.source(close, "SQV Volume Score", group="SQV Integration")
sqvMomentum = input.source(close, "SQV Momentum Score", group="SQV Integration")
// Custom filtering logic
strongTrend = sqvTrend > 80
goodVolume = sqvVolume > 70
strongSetup = strongTrend and goodVolume
if longSignal and sqvLongValid > 0 and strongSetup
strategy.entry("Strong Long", strategy.long)
```
#### Example 3: Order Flow Integration
```pinescript
// Import order flow data
sqvOrderFlow = input.source(close, "SQV Order Flow Delta", group="SQV Integration")
// Use order flow for additional confirmation
bullishFlow = sqvOrderFlow > 100 // Significant buying pressure
bearishFlow = sqvOrderFlow < -100 // Significant selling pressure
if longSignal and sqvLongValid > 0 and bullishFlow
strategy.entry("Long+Flow", strategy.long)
```
### Visual Feedback Configuration
#### Label Display Modes
1. **Autonomous Mode** (standalone testing):
- Enable "Show Labels Without Signals"
- Labels appear on every bar where score >= minimum threshold
- Useful for initial testing without strategy integration
2. **Signal Mode** (production use):
- Disable "Show Labels Without Signals"
- Enable "Use External Signals"
- Labels appear ONLY when your strategy generates signals
- Prevents chart clutter, shows validation exactly when needed
#### Troubleshooting Integration
**Common Issues:**
1. **Labels not appearing:**
- Verify "Use External Signals" is enabled
- Check signal sources are properly connected
- Ensure your strategy is actually generating signals (add visible plots temporarily)
2. **Wrong source selection:**
- Source dropdowns should show your indicator/strategy name
- Each output plot should be visible in the dropdown
- If not visible, check plot titles in your strategy
3. **Validation always failing:**
- Check Trading Mode matches your signal types
- Verify minimum score thresholds aren't too high
- Use Autonomous Mode to test if SQV is working properly
### Best Practices
1. **Always use `display=display.none`** for communication plots to keep charts clean
2. **Name your plots clearly** for easy identification in source dropdowns
3. **Test in Autonomous Mode first** to understand SQV behavior
4. **Use consistent signal logic** - ensure signals are binary (1 or 0)
5. **Consider adding a small delay** between signal and entry for validation processing
### Complete Integration Template
Here's a full template for a strategy with complete SQV integration:
```pinescript
//@version=6
strategy("Complete SQV Integration Template", overlay=true)
// ========== SQV Integration Inputs ==========
sqvScore = input.source(close, "SQV Score Source", group="SQV Integration")
sqvLongValid = input.source(close, "SQV Long Valid Source", group="SQV Integration")
sqvShortValid = input.source(close, "SQV Short Valid Source", group="SQV Integration")
sqvOrderFlow = input.source(close, "SQV Order Flow Delta", group="SQV Integration")
// ========== Strategy Parameters ==========
emaFast = input.int(9, "Fast EMA")
emaSlow = input.int(21, "Slow EMA")
useQualitySizing = input.bool(true, "Use Quality-Based Sizing")
// ========== Indicators ==========
ema1 = ta.ema(close, emaFast)
ema2 = ta.ema(close, emaSlow)
// ========== Signal Logic ==========
longSignal = ta.crossover(ema1, ema2)
shortSignal = ta.crossunder(ema1, ema2)
// ========== Export Signals to SQV ==========
plot(longSignal ? 1 : 0, "Long Signal Output", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal Output", display=display.none)
// ========== Position Sizing ==========
baseSize = 1
qualityMultiplier = useQualitySizing ?
(sqvScore >= 90 ? 3 : sqvScore >= 80 ? 2 : 1) : 1
positionSize = baseSize * qualityMultiplier
// ========== Entry Logic with SQV Validation ==========
if longSignal and sqvLongValid > 0
strategy.entry("Long", strategy.long, qty=positionSize)
if shortSignal and sqvShortValid > 0
strategy.entry("Short", strategy.short, qty=positionSize)
// ========== Exit Logic ==========
if strategy.position_size > 0 and shortSignal
strategy.close("Long")
if strategy.position_size < 0 and longSignal
strategy.close("Short")
// ========== Visual Feedback ==========
plotshape(longSignal and sqvLongValid > 0, "Valid Long",
location=location.belowbar, color=color.green, style=shape.triangleup)
plotshape(shortSignal and sqvShortValid > 0, "Valid Short",
location=location.abovebar, color=color.red, style=shape.triangledown)
```
This template provides everything needed for professional bidirectional integration between your custom strategy and SQV Lite.
## Order Flow Analysis
The integrated Order Flow system automatically adapts to market conditions, providing intelligent analysis of buying and selling pressure. The system handles various market scenarios including low liquidity and minimal price movement conditions through advanced algorithms.
## Visual Interface
### Signal Labels
Displays three-line information blocks:
- Grade designation (A+, A, B, C)
- Numerical quality score
- Order flow direction and magnitude
### Dashboard Elements
- **Profile Display**: Active configuration and thresholds
- **Score Visualization**: Real-time quality assessment
- **Flow Indicator**: Directional bias representation
- **Status Monitor**: Ready/Wait signal state
### Customization Options
- Label distance adjustment (0.5-3.0x ATR)
- Profile selection and custom configuration
- Component weight modifications (Custom mode)
- Threshold adjustments for different market conditions
## Trading Mode Selection
Three operational modes accommodate different trading styles:
- **Long Only**: Validates bullish signals exclusively
- **Short Only**: Validates bearish signals exclusively
- **Both**: Bi-directional signal validation
## Performance Considerations
SQV Lite maintains computational efficiency through:
- Optimized calculation cycles
- Selective component updates
- Efficient data structure usage
- Minimal redundant processing
---
## Feature Comparison: SQV Lite vs Full Version
### Core Components
| Component | SQV Lite | SQV Full | Details |
|-----------|----------|----------|---------|
| **Trend Analysis** | ✅ Full | ✅ Full | Professional trend evaluation |
| **Volume Dynamics** | ✅ Full | ✅ Full | Advanced volume analysis |
| **Momentum Assessment** | ✅ Full | ✅ Full | Multi-factor momentum |
| **Market Structure** | ✅ Basic | ✅ Enhanced | Key level detection |
| **Volatility Filter** | ✅ Full | ✅ Full | Risk-adjusted filtering |
| **Performance Analytics** | ❌ | ✅ | Real-time performance tracking |
| **Impulse Detection** | ❌ | ✅ | Advanced signal filtering |
### Advanced Features
| Feature | SQV Lite | SQV Full | Benefits |
|---------|----------|----------|----------|
| **Multi-Timeframe Analysis** | ❌ | ✅ | Higher timeframe confirmation |
| **Dynamic Position Sizing** | ❌ | ✅ Automatic | Dynamic size optimization |
| **Auto Mode** | ❌ | ✅ | Self-optimizing system |
| **Advanced Profiling** | ❌ | ✅ | Market depth analysis |
| **Recovery Mode** | ❌ | ✅ | Adaptive drawdown handling |
| **Statistical Validation** | ❌ | ✅ | Confidence-based filtering |
### Profiles & Configuration
| Feature | SQV Lite | SQV Full |
|---------|----------|----------|
| **Timeframe Profiles** | 5 | 8 |
| **Available Profiles** | 1-5m, 15-30m, 1-4H, Daily+, Custom | All Lite + ES, NQ, Auto |
| **Custom Weights** | ✅ Manual | ✅ Manual + Auto-optimization |
| **Threshold Adjustment** | ✅ | ✅ Enhanced |
### Visual Interface
| Feature | SQV Lite | SQV Full |
|---------|----------|----------|
| **Dashboard Styles** | 1 (Standard) | 4 (Multiple layouts) |
| **Signal Labels** | ✅ Basic | ✅ Enhanced with sizing |
| **Advanced Visualizations** | ❌ | ✅ |
| **Component Breakdown** | ❌ | ✅ Detailed view |
| **Performance Display** | ❌ | ✅ Live statistics |
| **Debug Mode** | ❌ | ✅ |
### Integration Capabilities
| Feature | SQV Lite | SQV Full |
|---------|----------|----------|
| **Script Type** | Indicator | Strategy |
| **Signal Import** | ✅ | Via strategy conditions |
| **Data Export** | ✅ All via plots | Internal to strategy |
| **Bidirectional Flow** | ✅ Full support | One-way (strategy-based) |
### Risk Management
| Feature | SQV Lite | SQV Full |
|---------|----------|----------|
| **Position Sizing** | Manual | ✅ Automatic |
| **Quality-Based Sizing** | Via integration | ✅ Built-in |
| **Performance Adjustment** | ❌ | ✅ |
| **Risk Grade System** | ❌ | ✅ Risk grading system |
| **Statistical Filtering** | ❌ | ✅ |
### Market Analysis
| Feature | SQV Lite | SQV Full |
|---------|----------|----------|
| **Order Flow Analysis** | ✅ Automatic | ✅ Advanced |
| **Market Manipulation Detection** | ❌ | ✅ |
| **Multi-Timeframe Validation** | ❌ | ✅ |
| **Advanced Momentum Analysis** | Basic | ✅ Enhanced |
| **Market Regime Adaptation** | Basic | ✅ Full Auto Mode |
### Summary
| Aspect | SQV Lite | SQV Full |
|--------|----------|----------|
| **Best For** | Signal validation, integration with custom strategies | Complete trading system with built-in strategy |
| **Learning Curve** | Easy | Moderate |
| **Customization** | High (via integration) | Very High (all parameters) |
| **Price** | Free | $29/month |
---
## SQV Bridge System
### Overview
The SQV Bridge System allows you to connect any TradingView indicator or strategy with the Signal Quality Validator (SQV) system. This enables you to add professional-grade signal validation to your existing trading tools without modifying their code.
### System Components
1. **SQV Lite** (Required) - The core validation engine
2. **Bridge** (Choose one):
- **Indicator Bridge** - For visual signals and alerts
- **Strategy Bridge** - For automated backtesting and trading
3. **Your Trading Tool** - Any indicator or strategy that generates signals
---
## SQV Indicator Bridge
### //@version=6
### indicator("SQV Indicator Bridge", overlay=true)
### Purpose
The Indicator Bridge displays validated entry signals on your chart. It receives signals from any indicator and validation from SQV Lite, showing only high-quality trade opportunities.
### Features
- Visual labels for validated signals
- Customizable appearance (size, color, position)
- Alert capabilities
- Hidden signal exports for other tools
### Setup Instructions
1. **Add Your Indicator**
- Apply your trading indicator to the chart
- Note which plots contain long/short signals
2. **Add SQV Lite**
- Add SQV Lite indicator to the same chart
- Configure SQV settings as needed
3. **Add Indicator Bridge**
- Add "SQV Indicator Bridge" to chart
- Connect the sources:
- Long Signal Source → Your indicator's long signal
- Short Signal Source → Your indicator's short signal
- SQV Long Valid → From SQV Lite
- SQV Short Valid → From SQV Lite
- SQV Score → From SQV Lite (for alerts)
### Configuration Options
#### Visual Settings
- **Show Labels**: Toggle signal labels on/off
- **Label Offset**: Distance from candles (0-5 ATR)
- **Label Size**: Tiny, Small, or Normal
- **Colors**: Customize long/short colors
#### Alerts
- Enable/disable alert notifications
- Alerts include SQV score in message
### Example Code (Add to Your Indicator)
```pinescript
// Export signals from your indicator
plot(longCondition ? 1 : 0, "Long Signal", display=display.none)
plot(shortCondition ? 1 : 0, "Short Signal", display=display.none)
```
### Complete Indicator Bridge Code
```pinescript
//@version=6
indicator("SQV Indicator Bridge", overlay=true)
// ===================================================================
// SQV INDICATOR BRIDGE - CLEAN VERSION
// Version 1.0
//
// Simple bridge that shows validated entry signals.
// Receives signals from any indicator and validation from SQV Lite.
//
// SETUP:
// 1. Add your indicator to chart
// 2. Add SQV Lite to chart
// 3. Add this bridge
// 4. Connect sources in settings
// ===================================================================
// ===================================================================
// INPUT SOURCES
// ===================================================================
// From your indicator
longSignal = input.source(close, "Long Signal Source", group="Signal Sources",
tooltip="Select Long Signal from your indicator")
shortSignal = input.source(close, "Short Signal Source", group="Signal Sources",
tooltip="Select Short Signal from your indicator")
// From SQV Lite
sqvLongValid = input.source(close, "SQV Long Valid", group="SQV Sources",
tooltip="Select 'SQV Long Valid' from SQV Lite")
sqvShortValid = input.source(close, "SQV Short Valid", group="SQV Sources",
tooltip="Select 'SQV Short Valid' from SQV Lite")
sqvScore = input.source(close, "SQV Score", group="SQV Sources",
tooltip="Select 'SQV Score' from SQV Lite (for alerts)")
// ===================================================================
// SETTINGS
// ===================================================================
showLabels = input.bool(true, "Show Labels", group="Visual")
labelOffset = input.float(0.0, "Label Offset (ATR)", minval=0.0, maxval=5.0, step=0.5, group="Visual",
tooltip="0 = Labels at candle edges, higher = further away")
labelSize = input.string("small", "Label Size", options= , group="Visual")
longColor = input.color(color.green, "Long Color", group="Visual")
shortColor = input.color(color.red, "Short Color", group="Visual")
enableAlerts = input.bool(false, "Enable Alerts", group="Alerts")
// ===================================================================
// MAIN LOGIC
// ===================================================================
// Calculate offset
atr = ta.atr(14)
offset = labelOffset > 0 ? atr * labelOffset : 0
// Check for validated signals
hasValidLong = longSignal > 0 and sqvLongValid > 0 and barstate.isconfirmed
hasValidShort = shortSignal > 0 and sqvShortValid > 0 and barstate.isconfirmed
// Show labels
if showLabels
if hasValidLong
label.new(bar_index, low - offset, "LONG",
style=label.style_label_up,
color=longColor,
textcolor=color.white,
size=labelSize == "tiny" ? size.tiny :
labelSize == "small" ? size.small : size.normal)
if hasValidShort
label.new(bar_index, high + offset, "SHORT",
style=label.style_label_down,
color=shortColor,
textcolor=color.white,
size=labelSize == "tiny" ? size.tiny :
labelSize == "small" ? size.small : size.normal)
// Alerts
if enableAlerts
if hasValidLong
alert("Long Signal Validated | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
if hasValidShort
alert("Short Signal Validated | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
// Hidden exports
plot(hasValidLong ? 1 : 0, "Valid Long", display=display.none)
plot(hasValidShort ? 1 : 0, "Valid Short", display=display.none)
```
---
## SQV Strategy Bridge
### //@version=6
### strategy("SQV Strategy Bridge", overlay=true, ...)
### Purpose
The Strategy Bridge executes trades with SQV validation, enabling backtesting and live trading with quality-filtered signals. It can receive position sizing, stop loss, and take profit levels from your strategy.
### Features
- Automated trade execution with SQV validation
- Dynamic position sizing support
- Stop loss and take profit integration
- Position status display
- Alert system for trade notifications
### Setup Instructions
1. **Prepare Your Strategy**
- Export required values as plots (see examples below)
- Ensure signals are clear (1 for entry, 0 for no signal)
2. **Add SQV Lite**
- Add SQV Lite indicator to the chart
- Configure validation parameters
3. **Add Strategy Bridge**
- Add "SQV Strategy Bridge" to chart
- Connect all required sources
### Source Connections
#### Required Sources
- **Long Signal Source** → Your strategy's long signal
- **Short Signal Source** → Your strategy's short signal
- **SQV Long Valid** → From SQV Lite
- **SQV Short Valid** → From SQV Lite
- **SQV Score** → From SQV Lite
#### Optional Sources (Advanced)
- **Position Size Source** → Dynamic position sizing
- **Long/Short Stop Loss** → Stop loss prices
- **Long/Short Take Profit** → Take profit prices
### Configuration Options
#### Position Management
- **Use Position Size from Strategy**: Enable dynamic sizing
- **Default Position Size %**: Fallback size (0.1-100%)
#### Risk Management
- **Use Stop Loss from Strategy**: Enable dynamic stops
- **Use Take Profit from Strategy**: Enable dynamic targets
### Example Code (Add to Your Strategy)
```pinescript
// Basic signal export
plot(buySignal ? 1 : 0, "Long Signal", display=display.none)
plot(sellSignal ? 1 : 0, "Short Signal", display=display.none)
// Advanced exports (optional)
// Position size (0.1 = 10% of equity)
plot(myPositionSize, "Position Size Output", display=display.none)
// Stop loss prices
plot(longStopPrice, "Long Stop Price", display=display.none)
plot(shortStopPrice, "Short Stop Price", display=display.none)
// Take profit prices
plot(longTPPrice, "Long TP Price", display=display.none)
plot(shortTPPrice, "Short TP Price", display=display.none)
```
### Complete Strategy Bridge Code
```pinescript
//@version=6
strategy("SQV Strategy Bridge",
overlay=true,
initial_capital=10000,
default_qty_type=strategy.percent_of_equity,
default_qty_value=10,
commission_type=strategy.commission.percent,
commission_value=0.1)
// ===================================================================
// SQV STRATEGY BRIDGE - SIMPLE VERSION
// Version 1.0
//
// Receives everything from your strategy:
// - Signals (when to trade)
// - Position size (how much to trade)
// - Stop loss levels (optional)
// - Take profit levels (optional)
//
// Bridge only executes trades with SQV validation
// ===================================================================
// ===================================================================
// SIGNAL SOURCES
// ===================================================================
longSignal = input.source(close, "Long Signal Source", group="Signal Sources",
tooltip="Connect to Long Signal from your strategy")
shortSignal = input.source(close, "Short Signal Source", group="Signal Sources",
tooltip="Connect to Short Signal from your strategy")
// ===================================================================
// SQV SOURCES
// ===================================================================
sqvLongValid = input.source(close, "SQV Long Valid", group="SQV Sources")
sqvShortValid = input.source(close, "SQV Short Valid", group="SQV Sources")
sqvScore = input.source(close, "SQV Score", group="SQV Sources")
// ===================================================================
// POSITION SIZE SOURCES (FROM YOUR STRATEGY)
// ===================================================================
usePositionFromStrategy = input.bool(false, "Use Position Size from Strategy", group="Position")
positionSizeSource = input.source(close, "Position Size Source", group="Position",
tooltip="Your strategy should export position size (% or fixed quantity)")
defaultPositionSize = input.float(10, "Default Position Size %", minval=0.1, maxval=100, group="Position",
tooltip="Used if 'Use Position Size from Strategy' is disabled")
// ===================================================================
// STOP LOSS SOURCES (FROM YOUR STRATEGY)
// ===================================================================
useStopFromStrategy = input.bool(false, "Use Stop Loss from Strategy", group="Risk Management")
longStopSource = input.source(close, "Long Stop Loss Price", group="Risk Management",
tooltip="Your strategy should export exact stop price for longs")
shortStopSource = input.source(close, "Short Stop Loss Price", group="Risk Management",
tooltip="Your strategy should export exact stop price for shorts")
// ===================================================================
// TAKE PROFIT SOURCES (FROM YOUR STRATEGY)
// ===================================================================
useTakeProfitFromStrategy = input.bool(false, "Use Take Profit from Strategy", group="Risk Management")
longTakeProfitSource = input.source(close, "Long Take Profit Price", group="Risk Management",
tooltip="Your strategy should export exact TP price for longs")
shortTakeProfitSource = input.source(close, "Short Take Profit Price", group="Risk Management",
tooltip="Your strategy should export exact TP price for shorts")
// ===================================================================
// ALERTS
// ===================================================================
enableAlerts = input.bool(true, "Enable Alerts", group="Alerts")
// ===================================================================
// TRADING LOGIC
// ===================================================================
// Check signals with SQV validation
hasLongSignal = longSignal > 0 and sqvLongValid > 0 and barstate.isconfirmed
hasShortSignal = shortSignal > 0 and sqvShortValid > 0 and barstate.isconfirmed
// Position state
inLong = strategy.position_size > 0
inShort = strategy.position_size < 0
// Get position size
getPositionSize() =>
if usePositionFromStrategy and positionSizeSource > 0
positionSizeSource
else
defaultPositionSize / 100
// LONG ENTRY
if hasLongSignal and not inLong
if inShort
strategy.close("Short")
qty = getPositionSize()
strategy.entry("Long", strategy.long, qty=qty)
// Set exit orders if provided by strategy
if useStopFromStrategy or useTakeProfitFromStrategy
stopPrice = useStopFromStrategy and longStopSource > 0 ? longStopSource : na
tpPrice = useTakeProfitFromStrategy and longTakeProfitSource > 0 ? longTakeProfitSource : na
if not na(stopPrice) or not na(tpPrice)
strategy.exit("Long Exit", "Long", stop=stopPrice, limit=tpPrice)
if enableAlerts
alert("Long Entry | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
// SHORT ENTRY
if hasShortSignal and not inShort
if inLong
strategy.close("Long")
qty = getPositionSize()
strategy.entry("Short", strategy.short, qty=qty)
// Set exit orders if provided by strategy
if useStopFromStrategy or useTakeProfitFromStrategy
stopPrice = useStopFromStrategy and shortStopSource > 0 ? shortStopSource : na
tpPrice = useTakeProfitFromStrategy and shortTakeProfitSource > 0 ? shortTakeProfitSource : na
if not na(stopPrice) or not na(tpPrice)
strategy.exit("Short Exit", "Short", stop=stopPrice, limit=tpPrice)
if enableAlerts
alert("Short Entry | Score: " + str.tostring(sqvScore, "#"), alert.freq_once_per_bar_close)
// ===================================================================
// POSITION INFO
// ===================================================================
var label infoLabel = label.new(bar_index, high, "", style=label.style_label_left)
if barstate.islast
posText = "Bridge Status "
posText := inLong ? posText + "Position: LONG " : inShort ? posText + "Position: SHORT " : posText + "Position: FLAT "
posText := "SQV Score: " + str.tostring(sqvScore, "#")
label.set_xy(infoLabel, bar_index + 1, high)
label.set_text(infoLabel, posText)
label.set_color(infoLabel, inLong ? color.new(color.green, 80) : inShort ? color.new(color.red, 80) : color.new(color.gray, 80))
label.set_textcolor(infoLabel, color.white)
// ===================================================================
// HOW TO EXPORT FROM YOUR STRATEGY:
//
// // In your strategy, export these values:
//
// // Position size (% as decimal: 0.1 = 10%, or fixed: 0.2 = 0.2 BTC)
// plot(myPositionSize, "Position Size Output", display=display.none)
//
// // Stop loss prices
// plot(longStopPrice, "Long Stop Price", display=display.none)
// plot(shortStopPrice, "Short Stop Price", display=display.none)
//
// // Take profit prices
// plot(longTPPrice, "Long TP Price", display=display.none)
// plot(shortTPPrice, "Short TP Price", display=display.none)
// ===================================================================
```
---
## Quick Start Guide
### For Indicators (Visual Signals)
1. Add these three indicators in order:
- Your trading indicator
- SQV Lite
- SQV Indicator Bridge
2. In Bridge settings, connect:
- Signal sources from your indicator
- Validation sources from SQV Lite
3. Adjust visual settings to preference
### For Strategies (Automated Trading)
1. Modify your strategy to export signals:
```pinescript
plot(longSignal ? 1 : 0, "Long Signal", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal", display=display.none)
```
2. Add to chart:
- Your modified strategy (as indicator)
- SQV Lite
- SQV Strategy Bridge
3. Connect all sources in Bridge settings
4. Run backtest or enable live trading
---
## Tips & Best Practices
### Signal Quality
- SQV validates signals based on 5 market components (7 in full version)
- Only signals with sufficient quality score pass validation
- Adjust SQV settings to match your trading style
### Position Sizing
- Default sizing uses percentage of equity
- Advanced users can export dynamic sizing from strategy
- Size based on signal quality or market conditions
### Risk Management
- Always use stop losses (manual or from strategy)
- Consider using SQV's quality score for position sizing
- Monitor win rate and Sharpe ratio in SQV dashboard (full version)
### Troubleshooting
- **No signals showing**: Check source connections
- **Too few signals**: Lower SQV minimum score
- **Too many signals**: Increase SQV requirements
- **Backtest issues**: Ensure strategy calculations match
---
## Example Setups
### Simple Moving Average Cross + SQV
```pinescript
// In your indicator
ma_fast = ta.sma(close, 20)
ma_slow = ta.sma(close, 50)
longSignal = ta.crossover(ma_fast, ma_slow)
shortSignal = ta.crossunder(ma_fast, ma_slow)
plot(longSignal ? 1 : 0, "Long Signal", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal", display=display.none)
```
### RSI Strategy with Dynamic Stops
```pinescript
// In your strategy
rsi = ta.rsi(close, 14)
longSignal = rsi < 30
shortSignal = rsi > 70
// Dynamic stops based on ATR
atr = ta.atr(14)
longStop = close - (atr * 2)
shortStop = close + (atr * 2)
// Export everything
plot(longSignal ? 1 : 0, "Long Signal", display=display.none)
plot(shortSignal ? 1 : 0, "Short Signal", display=display.none)
plot(longStop, "Long Stop Price", display=display.none)
plot(shortStop, "Short Stop Price", display=display.none)
```
---
## Advanced Features
### Multi-Timeframe Validation
SQV automatically checks higher timeframes for confluence, improving signal reliability (Full version only).
### Adaptive Profiles
Use "Auto" profile in SQV for dynamic parameter adjustment based on market conditions (Full version only).
### Performance Tracking
SQV tracks win rate, Sharpe ratio, and other metrics to ensure consistent performance (Full version only).
### Order Flow Analysis
Validates signals using volume delta and buying/selling pressure (included in Lite version).
---
## Upgrade to SQV Full Version
### Enhanced Capabilities in Full Version
The complete SQV system extends validation capabilities with advanced components:
#### 🎯 **Performance Analytics Component**
- Real-time Sharpe Ratio calculation
- Win rate tracking with confidence intervals
- Risk-adjusted performance metrics
- Adaptive threshold adjustments
#### ⚡ **Impulse Detection with Trap Analysis**
- Advanced momentum surge detection
- Market manipulation identification
- False breakout filtering
- Volume/price divergence analysis
#### 📊 **Multi-Timeframe Confluence**
- Three-timeframe trend alignment
- Higher timeframe confirmation requirements
- Confluence strength scoring
- Directional bias validation
#### 🎰 **Dynamic Position Sizing**
- Automatic position multipliers based on signal quality
- Grade A+ signals (90+) = Maximum multiplier
- Grade A signals (80-89) = Scaled multiplier
- Grade B signals (65-79) = Base position size
- Risk-adjusted position management
- Sharpe-influenced adjustments
#### 🔄 **Auto Mode**
- Market-adaptive parameter optimization
- Dynamic weight redistribution
- Volatility-based threshold adjustments
- Self-calibrating component settings
#### 📈 **Volume Profile Integration**
- Point of Control (POC) identification
- Value Area analysis (VAH/VAL)
- Profile-based support/resistance
- Volume distribution visualization
#### 🛡️ **Recovery Mode**
- Drawdown detection and adaptation
- Conservative validation during recovery
- Gradual threshold normalization
- Performance-based re-engagement
#### 📊 **Extended Visualizations**
- Multiple dashboard layouts
- Component breakdown displays
- Performance statistics panels
- Risk grade assessments
### Why Upgrade?
While SQV Lite provides robust signal validation, the Full Version transforms your trading with:
- **Automated risk management** through dynamic sizing
- **Superior signal filtering** via Impulse and MTF components
- **Performance optimization** with real-time analytics
- **Market adaptation** through Auto Mode
- **Additional dashboard layouts** for complete market insight
The Full Version includes everything in Lite plus seven additional premium components.
---
## 💰 **SQV Full Version Pricing**
### **Monthly Subscription: $29/month**
Get instant access to the complete Signal Quality Validator system with all premium features:
- ✅ All 7 additional advanced components
- ✅ Automatic position sizing optimization
- ✅ Performance analytics & Sharpe tracking
- ✅ Impulse detection with trap analysis
- ✅ Multi-timeframe confluence validation
- ✅ Auto Mode with self-optimization
- ✅ Recovery mode for drawdown management
- ✅ 4 dashboard layouts
- ✅ Lifetime updates included
- ✅ Priority support
**The automatic position sizing feature alone can pay for months of subscription with a single properly-sized winning trade.**
### 📩 **How to Subscribe**
To get access to SQV Full Version:
1. **Send me a DM** on TradingView
2. **Include your TradingView username/ID** in the message
3. Receive payment instructions and access upon confirmation
*Your TradingView ID is required to grant access to the private indicator.*
### 🔧 **Custom Integration Services**
**Need direct integration into your Pine Script strategy?**
For traders requiring seamless library-based integration without the 500-bar limitation:
- Full backtesting on complete price history
- Zero signal delay
- Custom parameter optimization
- Private library implementation
**📩 DM me for custom integration pricing and details**
---
## Support and Updates
- Both bridges are regularly updated
- SQV Lite receives regular maintenance updates
- For technical questions or feature requests, please reach out through TradingView's messaging system
- Check for new features and improvements in the script descriptions
## Disclaimer
Signal Quality Validator provides technical analysis assistance only. All trading decisions remain the sole responsibility of the user. Past performance does not guarantee future results. Trade responsibly and within your risk tolerance.
*Note: This system is designed for educational purposes. Always test thoroughly before live trading.*
SuperTrend - Dynamic Lines and ChannelsSuperTrend Indicator: Comprehensive Description
Overview
The SuperTrend indicator is Pine Script V6 designed for TradingView to plot dynamic trend lines & channels across multiple timeframes (Daily, Weekly, Monthly, Quarterly, and Yearly/All-Time) to assist traders in identifying potential support, resistance, and trend continuation levels. The script calculates trendlines based on high and low prices over specified periods, projects these trendlines forward, and includes optional reflection channels and heartlines to provide additional context for price action analysis. The indicator is highly customizable, allowing users to toggle the visibility of trendlines, projections, and heartlines for each timeframe, with a focus on the DayTrade channel, which includes unique reflection channel features.
This description provides a detailed explanation of the indicator’s features, functionality, and display, with a specific focus on the DayTrade channel’s anchoring, the role of static and dynamic channels in projecting future price action, the heartline’s potential as a volume indicator, and how traders can use the indicator for line-to-line trading strategies.
Features and Functionality
1. Dynamic Trend Channels
The SuperTrend indicator calculates trend channels for five timeframes:
DayTrade Channel: Tracks daily highs and lows, updating before 12 PM each trading day.
Weekly Channel: Tracks highs and lows over a user-selected period (1, 2, or 3 weeks).
Monthly Channel: Tracks monthly highs and lows.
Quarterly Channel: Tracks highs and lows over a user-selected period (1 or 2 quarters).
Yearly/All-Time Channel: Tracks highs and lows over a user-selected period (1 to 10 years or All Time).
Each channel consists of:
Upper Trendline: Connects the high prices of the previous and current periods.
Lower Trendline: Connects the low prices of the previous and current periods.
Projections: Extends the trendlines forward based on the trend’s slope.
Heartline: A dashed line drawn at the midpoint between the upper and lower trendlines or their projections.
DayTrade Channel Anchoring
The DayTrade channel anchors its trendlines to the high and low prices of the previous and current trading days, with updates restricted to before 12 PM to capture significant price movements during the morning session, which is often more volatile due to market openings or news events. The "Show DayTrade Trend Lines" toggle enables this channel, and after 12 PM, the trendlines and projections remain static for the rest of the trading day. This static anchoring provides a consistent reference for potential support and resistance levels, allowing traders to anticipate price reactions based on historical highs and lows from the previous day and the morning session of the current day.
The static nature of the DayTrade channel after 12 PM ensures that the trendlines and projections do not shift mid-session, providing a stable framework for traders to assess whether price action respects or breaks these levels, potentially indicating trend continuation or reversal.
Static vs. Dynamic Channels
Static Channels: Once set (e.g., after 12 PM for the DayTrade channel or at the start of a new period for other timeframes), the trendlines remain fixed until the next period begins. This static behavior allows traders to use the channels as reference levels for potential price targets or reversal points, as they are based on historical price extremes.
Dynamic Projections: The projections extend the trendlines forward, providing a visual guide for potential future price action, assuming the trend’s momentum continues. When a trendline is broken (e.g., price closes above the upper projection or below the lower projection), it may suggest a breakout or reversal, prompting traders to reassess their positions.
2. Reflection Channels (DayTrade Only)
The DayTrade channel includes optional lower and upper reflection channels, which are additional trendlines positioned symmetrically around the main channel to provide extended support and resistance zones. These are controlled by the "Show Reflection Channel" dropdown.
Lower Reflection Channel:
Position: Drawn below the lower trendline at a distance equal to the range between the upper and lower trendlines.
Projection: Extends forward as a dashed line.
Heartline: A dashed line drawn at the midpoint between the lower trendline and the lower reflection trendline, controlled by the "Show Lower Reflection Heartline" toggle.
Upper Reflection Channel:
Position: Drawn above the upper trendline at the same distance as the main channel’s range.
Projection: Extends forward as a dashed line.
Heartline: A dashed line drawn at the midpoint between the upper trendline and the upper reflection trendline, controlled by the "Show Upper Reflection Heartline" toggle.
Display Control: The "Show Reflection Channel" dropdown allows users to select:
"None": No reflection channels are shown.
"Lower": Only the lower reflection channel is shown.
"Upper": Only the upper reflection channel is shown.
"Both": Both reflection channels are shown.
Purpose: Reflection channels extend the price range analysis by providing additional levels where price may react, acting as potential targets or reversal zones after breaking the main trendlines.
3. Heartlines
Each timeframe, including the DayTrade channel and its reflection channels, can display a heartline, which is a dashed line plotted at the midpoint between the upper and lower trendlines or their projections. For the DayTrade channel:
Main DayTrade Heartline: Midpoint between the upper and lower trendlines, controlled by the "Show DayTrade Heartline" toggle.
Lower Reflection Heartline: Midpoint between the lower trendline and the lower reflection trendline, controlled by the "Show Lower Reflection Heartline" toggle.
Upper Reflection Heartline: Midpoint between the upper trendline and the upper reflection trendline, controlled by the "Show Upper Reflection Heartline" toggle.
Independent Toggles: Visibility is controlled by:
"Show DayTrade Heartline": For the main DayTrade heartline.
"Show Lower Reflection Heartline": For the lower reflection heartline.
"Show Upper Reflection Heartline": For the upper reflection heartline.
Potential Volume Indicator: The heartline represents the average price level between the high and low of a period, which may correlate with areas of high trading activity or volume concentration, as these midpoints often align with price levels where buyers and sellers have historically converged. A break above or below the heartline, especially with strong momentum, may indicate a shift in market sentiment, potentially leading to accelerated price movement in the direction of the break. However, this is an observation based on the heartline’s position, not a direct measure of volume, as the script does not incorporate volume data.
4. Alerts
The script includes alert conditions for all timeframes, triggered when a candle closes fully above the upper projection or below the lower projection. For the DayTrade channel:
Upper Trend Break: Triggers when a candle closes fully above the upper projection.
Lower Trend Break: Triggers when a candle closes fully below the lower projection.
Alerts are combined across all timeframes, so a break in any timeframe triggers a general "Upper Trend Break" or "Lower Trend Break" alert with the message: "Candle closed fully above/below one or more projection lines." Alerts fire once per bar close.
5. Customization Options
The script provides extensive customization through input settings, grouped by timeframe:
DayTrade Channel:
"Show DayTrade Trend Lines": Toggle main trendlines and projections.
"Show DayTrade Heartline": Toggle main heartline.
"Show Lower Reflection Heartline": Toggle lower reflection heartline.
"Show Upper Reflection Heartline": Toggle upper reflection heartline.
"DayTrade Channel Color": Set color for trendlines.
"DayTrade Projection Channel Color": Set color for projections.
"Heartline Color": Set color for all heartlines.
"Show Reflection Channel": Dropdown to show "None," "Lower," "Upper," or "Both" reflection channels.
Other Timeframes (Weekly, Monthly, Quarterly, Yearly/All-Time):
Toggles for trendlines (e.g., "Show Weekly Trend Lines," "Show Monthly Trend Lines") and heartlines (e.g., "Show Weekly Heartline," "Show Monthly Heartline").
Period selection (e.g., "Weekly Period" for 1, 2, or 3 weeks; "Yearly Period" for 1 to 10 years or All Time).
Separate colors for trendlines (e.g., "Weekly Channel Color"), projections (e.g., "Weekly Projection Channel Color"), and heartlines (e.g., "Weekly Heartline Color").
Max Bar Difference: Limits the distance between anchor points to ensure relevance to recent price action.
Display
The indicator overlays the following elements on the chart:
Trendlines: Solid lines connecting the high and low anchor points for each timeframe, using user-specified colors (e.g., set via "DayTrade Channel Color").
Projections: Dashed lines extending from the current anchor points, indicating potential future price levels, using colors set via "DayTrade Projection Channel Color" or equivalent.
Heartlines: Dashed lines at the midpoint of each channel, using the color set via "Heartline Color" or equivalent.
Reflection Channels (DayTrade Only):
Lower reflection trendline and projection: Below the lower trendline, using the same colors as the main channel.
Upper reflection trendline and projection: Above the upper trendline, using the same colors.
Reflection heartlines: Midpoints between the main trendlines and their respective reflection trendlines, using the "Heartline Color."
Visual Clarity: Lines are only drawn if the relevant toggles (e.g., "Show DayTrade Trend Lines") are enabled and data is available. Lines are deleted when their conditions are not met to avoid clutter.
Trading Applications: Line-to-Line Trading
The SuperTrend indicator can be used to inform trading decisions by providing a framework for line-to-line trading, where traders use the trendlines, projections, and heartlines as reference points for entries, exits, and risk management. Below is a detailed explanation of how to use the DayTrade channel and its reflection channels for trading, focusing on their anchoring, static/dynamic behavior, and the heartline’s role.
1. Why DayTrade Channel Anchoring
The DayTrade channel’s anchoring to the previous day’s high/low and the current day’s high/low before 12 PM, controlled by the "Show DayTrade Trend Lines" toggle, captures significant price levels during high-volatility periods:
Previous Day High/Low: These represent key levels where price found resistance (high) or support (low) in the prior session, often acting as psychological or technical barriers in the current session.
Current Day High/Low Before 12 PM: The morning session (before 12 PM) often sees increased volatility due to market openings, news releases, or institutional activity. Anchoring to these early highs/lows ensures the channel reflects the most relevant price extremes, which are likely to influence intraday price action.
Static After 12 PM: By fixing the anchor points after 12 PM, the trendlines and projections become stable references for the afternoon session, allowing traders to anticipate price reactions at these levels without the lines shifting unexpectedly.
This anchoring makes the DayTrade channel particularly useful for intraday traders, as it provides a consistent framework based on recent price history, which can guide decisions on trend continuation or reversal.
2. Using Static Channels and Projections
The static nature of the DayTrade channel after 12 PM, enabled by "Show DayTrade Trend Lines," and the dynamic projections, set via "DayTrade Projection Channel Color," provide a structured approach to trading:
Support and Resistance:
The upper trendline and lower trendline act as dynamic support/resistance levels based on the previous and current day’s price extremes.
Traders may observe price reactions (e.g., bounces or breaks) at these levels. For example, if price approaches the lower trendline and bounces, it may indicate support, suggesting a potential long entry.
Projections as Price Targets:
The projections extend the trendlines forward, offering potential price targets if the trend continues. For instance, if price breaks above the upper trendline and continues toward the upper projection, traders might consider it a bullish continuation signal.
A candle closing fully above the upper projection or below the lower projection (triggering an alert) may indicate a breakout, prompting traders to enter in the direction of the break or reassess if the break fails.
Static Channels for Breakouts:
Because the trendlines are static after 12 PM, they serve as fixed reference points. A break above the upper trendline or its projection may suggest bullish momentum, while a break below the lower trendline or projection may indicate bearish momentum.
Traders can use these breaks to set entry points (e.g., entering a long position after a confirmed break above the upper projection) and place stop-losses below the broken level to manage risk.
3. Line-to-Line Trading Strategy
Line-to-line trading involves using the trendlines, projections, and reflection channels as sequential price targets or reversal zones:
Trading Within the Main Channel:
Long Setup: If price bounces off the lower trendline and moves toward the heartline (enabled by "Show DayTrade Heartline") or upper trendline, traders might enter a long position near the lower trendline, targeting the heartline or upper trendline for profit-taking. A stop-loss could be placed below the lower trendline to protect against a breakdown.
Short Setup: If price rejects from the upper trendline and moves toward the heartline or lower trendline, traders might enter a short position near the upper trendline, targeting the heartline or lower trendline, with a stop-loss above the upper trendline.
Trading to Reflection Channels:
If price breaks above the upper trendline and continues toward the upper reflection trendline or its projection (enabled by "Show Reflection Channel" set to "Upper" or "Both"), traders might treat this as a breakout trade, entering long with a target at the upper reflection level and a stop-loss below the upper trendline.
Similarly, a break below the lower trendline toward the lower reflection trendline or its projection (enabled by "Show Reflection Channel" set to "Lower" or "Both") could signal a short opportunity, with a target at the lower reflection level and a stop-loss above the lower trendline.
Reversal Trades:
If price reaches the upper reflection trendline and shows signs of rejection (e.g., a bearish candlestick pattern), traders might consider a short position, anticipating a move back toward the main channel’s upper trendline or heartline.
Conversely, a rejection at the lower reflection trendline could prompt a long position targeting the lower trendline or heartline.
Risk Management:
Use the heartline as a midpoint to gauge whether price is likely to continue toward the opposite trendline or reverse. For example, a failure to break above the heartline after bouncing from the lower trendline might suggest weakening bullish momentum, prompting a tighter stop-loss.
The static nature of the channels after 12 PM allows traders to set precise stop-loss and take-profit levels based on historical price levels, reducing the risk of chasing moving targets.
4. Heartline as a Volume Indicator
The heartline, controlled by toggles like "Show DayTrade Heartline," "Show Lower Reflection Heartline," and "Show Upper Reflection Heartline," may serve as an indirect proxy for areas of high trading activity:
Rationale: The heartline represents the average price between the high and low of a period, which often aligns with price levels where significant buying and selling have occurred, as these midpoints can correspond to areas of consolidation or high volume in the order book. While the script does not directly use volume data, the heartline’s position may reflect price levels where market participants have historically balanced supply and demand.
Breakout Potential: A break above or below the heartline, particularly with a strong candle (e.g., wide range or high momentum), may indicate a shift in market sentiment, potentially leading to accelerated price movement in the direction of the break. For example:
A close above the main DayTrade heartline could suggest buyers are overpowering sellers, potentially leading to a move toward the upper trendline or upper reflection channel.
A close below the heartline could indicate seller dominance, targeting the lower trendline or lower reflection channel.
Trading Application:
Traders might use heartline breaks as confirmation signals for trend continuation. For instance, after a bounce from the lower trendline, a close above the heartline could confirm bullish momentum, prompting a long entry.
The heartline can also act as a dynamic stop-loss or trailing stop level. For example, in a long trade, a trader might exit if price falls below the heartline, indicating a potential reversal.
For reflection heartlines, a break above the upper reflection heartline or below the lower reflection heartline could signal strong momentum, as these levels are further from the main channel and may require significant buying or selling pressure to breach.
5. Practical Trading Considerations
Timeframe Context: The DayTrade channel, enabled by "Show DayTrade Trend Lines," is best suited for intraday trading due to its daily anchoring and morning update behavior. Traders should consider higher timeframe channels (e.g., enabled by "Show Weekly Trend Lines" or "Show Monthly Trend Lines") for broader context, as breaks of the DayTrade channel may align with or be influenced by larger trends.
Confirmation Tools: Use additional indicators (e.g., RSI, MACD, or volume-based indicators) or candlestick patterns to confirm signals at trendlines, projections, or heartlines. The script’s alerts can help identify breakouts, but traders should verify with other technical or fundamental factors.
Risk Management: Always define risk-reward ratios before entering trades. For example, a 1:2 risk-reward ratio might involve risking a stop-loss below the lower trendline to target the heartline or upper trendline.
Market Conditions: The effectiveness of the channels and heartlines depends on market conditions (e.g., trending vs. ranging markets). In choppy markets, price may oscillate within the main channel, favoring range-bound strategies. In trending markets, breaks of projections or reflection channels may signal continuation trades.
Limitations: The indicator relies on historical price data and does not incorporate volume, news, or other external factors. Traders should use it as part of a broader strategy and avoid relying solely on its signals.
How to Use in TradingView
Add the Indicator: Copy the script into TradingView’s Pine Editor, compile it, and add it to your chart.
Configure Settings:
Enable "Show DayTrade Trend Lines" to display the main DayTrade trendlines and projections.
Use the "Show Reflection Channel" dropdown to select "Lower," "Upper," or "Both" to display reflection channels.
Toggle "Show DayTrade Heartline," "Show Lower Reflection Heartline," and "Show Upper Reflection Heartline" to control heartline visibility.
Adjust colors using "DayTrade Channel Color," "DayTrade Projection Channel Color," and "Heartline Color."
Enable other timeframes (e.g., "Show Weekly Trend Lines," "Show Monthly Trend Lines") for additional context, if desired.
Set Alerts: Configure alerts in TradingView for "Upper Trend Break" or "Lower Trend Break" to receive notifications when a candle closes fully above or below any timeframe’s projections.
Analyze the Chart:
Monitor price interactions with the trendlines, projections, and heartlines.
Look for bounces, breaks, or rejections at these levels to plan entries and exits.
Use the heartline breaks as potential confirmation of momentum shifts.
Test Strategies: Backtest line-to-line trading strategies in TradingView’s strategy tester or demo account to evaluate performance before trading with real capital.
Conclusion
The SuperTrend indicator provides a robust framework for technical analysis by plotting dynamic trend channels, projections, and heartlines across multiple timeframes, with advanced features for the DayTrade channel, including lower and upper reflection channels. The DayTrade channel’s anchoring to previous and current day highs/lows before 12 PM, enabled by "Show DayTrade Trend Lines," creates a stable reference for intraday trading, while static trendlines and dynamic projections guide traders in anticipating price movements. The heartlines, controlled by toggles like "Show DayTrade Heartline," offer potential insights into high-activity price levels, with breaks possibly indicating momentum shifts. Traders can use the indicator for line-to-line trading by targeting moves between trendlines, projections, and reflection channels, while managing risk with stop-losses and confirmations from other tools. The indicator should be used as part of a comprehensive trading plan.
[Top] Multi-Candle Pattern DetectorThe Multi-Candle Pattern Detector is a powerful tool that scans for a wide variety of high-probability candlestick formations directly on the chart. It highlights key multi-bar reversal and continuation patterns using intuitive emoji-based labels and descriptive tooltips, helping traders quickly assess market conditions and potential setups.
Supported patterns include:
Bullish & Bearish Engulfing
Morning Star / Evening Star
Three Line Strike
Rising / Falling Three Methods
Hammer / Inverted Hammer / Hanging Man / Gravestone Doji
To reduce false signals, this script includes a built-in trend filter using a custom LHAMA (Low-High Adaptive Moving Average) calculation. Patterns are only displayed when recent price action is not flat, helping traders avoid entries during consolidation.
Users can toggle each pattern type individually, making the script adaptable for various strategies and timeframes.
⸻
Potential Uses
Reversal Spotting: Identify key inflection points at the end of trends.
Continuation Confirmation: Confirm trend strength following brief pauses in momentum.
Price Action Training: Visually reinforce recognition of textbook candlestick patterns.
Strategy Integration: Combine with trend or volume filters for more advanced rule-based systems.
⸻
This indicator is suitable for traders who rely on price action and candlestick psychology, and is useful across all asset classes and chart intervals.
✅ TrendSniper Pro✅ SPNIPER ENTRY – Precision Trend Reversal Signals
The SPNIPER ENTRY is a smart trend-following and reversal indicator designed for traders who want timely entries, clear trend confirmation, and clean visuals.
Key Features:
✅ Triple TEMA Trend Confirmation (21, 50, 200): Ensures you're entering only when all moving averages agree on direction.
🎯 Dip/Top Detection: Uses pivot analysis and ATR proximity to detect ideal pullback entries in the prevailing trend.
📉 Stop Loss & Take Profit Zones: ATR-based dynamic SL/TP levels plotted automatically.
📛 False Signal Filter: Avoids multiple entries by maintaining a position until an opposite signal occurs.
📊 Clean Chart Coloring: Candles turn green for confirmed uptrend and red for downtrend—easy to follow.
🔔 Built-in Alerts: Be notified when conditions align perfectly for a high-probability trade.
👁️ Optional TEMA Display: Toggle visibility of trend components for deeper insight.
How it Works:
A buy signal occurs only when:
All 3 TEMA slopes are positive
Price pulls back near a recent pivot low (dip)
A valid uptrend is in place
A sell signal occurs only when:
All 3 TEMA slopes are negative
Price nears a recent pivot high (top)
A confirmed downtrend is active
This indicator is ideal for swing traders, intraday traders, and scalpers who want precise entries based on structure, slope, and volatility.
No Supply No Demand (NSND) – Volume Spread Analysis ToolThis indicator is designed for traders utilizing Volume Spread Analysis (VSA) techniques. It automatically detects potential No Demand (ND) and No Supply (NS) candles based on volume and price behavior, and confirms them using future price action within a user-defined number of lookahead bars.
Confirmed No Demand (ND): Detected when a bullish candle has volume lower than the previous two bars and is followed by weakness (next highs swept, close below).
Confirmed No Supply (NS): Detected when a bearish candle has volume lower than the previous two bars and is followed by strength (next lows swept, close above).
Adjustable lookahead bars parameter to control the confirmation window.
This tool helps identify potential distribution (ND) and accumulation (NS) areas, providing early signs of market turning points based on professional volume logic. The dot appears next to ND or NS.
AI ALGO [SardarUmar]This PineScript code is a comprehensive trading strategy that combines trend identification, rejection signals, and profit target management. Here's a detailed breakdown:
Trend Identification
1. Supertrend: The code uses a Supertrend indicator with a weighted moving average (WMA) and exponential moving average (EMA) to smooth out the trend line.
2. Trend Direction: The trend direction is determined by the crossover and crossunder of the Supertrend line.
Rejection Signals
1. Bullish Rejection: A bullish rejection signal is generated when the price consolidates at the trend line and then moves above it.
2. Bearish Rejection: A bearish rejection signal is generated when the price consolidates at the trend line and then moves below it.
Profit Target Management
1. Stop Loss (SL): The stop loss level is calculated based on the Average True Range (ATR) and a specified multiplier.
2. Take Profit (TP) Levels: The code calculates multiple take profit levels (TP1, TP2, TP3) based on the stop loss distance and specified multipliers.
Alerts
1. Trend Change Alerts: Alerts are generated when the price crosses above or below the stop loss level, indicating a potential trend change.
2. Rejection Signal Alerts: Alerts are generated when the price rejects at the stop loss level, indicating a potential rejection signal.
3. TP Hit Alerts: Alerts are generated when the price reaches the take profit levels.
Visualizations
1. Trend Line: The trend line is plotted on the chart, with different colors for bullish and bearish trends.
2. Rejection Signals: Rejection signals are plotted as shapes on the chart.
3. Profit Target Levels: The profit target levels are plotted as lines on the chart.
Notes:
- This code is for educational purposes only and should not be used as is in live trading without thorough backtesting and validation.
- Traders should always use proper risk management techniques and position sizing when trading with automated systems.
The code seems well-structured and readable. However, it's essential to test and validate any trading strategy before using it in live markets.
Combined: Strat Dashboard + FVG + M&E StarsSTRAT MIX + VECTOR + SUPPORT
In financial markets, support and resistance are fundamental concepts in technical analysis used to identify price levels where an asset's price tends to pause or reverse. They are essentially areas on a chart where buying or selling pressure is expected to be strong enough to temporarily halt or reverse the prevailing price trend.
Here's a breakdown:
* Support: This is a price level where an asset's downward movement is expected to stop due to increased buying interest. Think of it as a "floor" where demand is strong enough to prevent the price from falling further. When the price approaches a support level, buyers tend to step in, leading to a potential bounce or reversal upwards. The more times a price level has held as support in the past, the stronger it's generally considered.
* Resistance: This is a price level where an asset's upward movement is expected to stop due to increased selling interest. It acts like a "ceiling" where supply is strong enough to prevent the price from rising higher. When the price approaches a resistance level, sellers tend to step in, leading to a potential pullback or reversal downwards. Similar to support, the more times a price level has acted as resistance, the more significant it's often seen.
Key characteristics:
* Supply and Demand: Support and resistance levels are a reflection of the continuous interplay between supply (sellers) and demand (buyers) in the market.
* Dynamic Nature: These levels are not fixed lines but rather zones. They can also "flip roles"; if a resistance level is broken and the price moves above it, that former resistance can then become a new support level, and vice-versa.
* Psychological Importance: These levels often derive their strength from collective market psychology, as many traders and investors recognize and react to the same price points.
Boring w/Prev LeginThis TradingView Pine Script highlights “boring” candles that follow a specific “legin” candle, based on strict supply/demand zone and price action rules inspired by your trading strategy.
A candle will be highlighted if it meets all of these:
The current candle is “boring” (low volatility, small range).
The previous candle was a “legin” (high volatility, big move).
The previous “legin” was much larger than the current “boring” candle (by TR or size).
The boring candle has both upper and lower wicks (not a marubozu).
The legin candle had a strong body (≥70% of its size) and a wick on its close side (showing strong price rejection).
BG's SPEAR - SPY Precision Entry & Reversal (5min)BG's SPEAR - SPY Precision Entry & Reversal
Advanced Technical Analysis for SPY Intraday Trading
📊 Overview
BG's SPEAR is a comprehensive technical indicator designed for SPY intraday trading, combining multiple momentum oscillators and trend analysis to identify high-probability entry and exit points. The system integrates classic technical analysis with modern volatility filtering for enhanced signal quality.
🎯 Signal Types
Primary Signals:
Triangle markers indicate momentum-based entry opportunities
Enhanced signals provide additional confluence for higher-confidence trades
Color-coded system for easy visual identification
Supporting Analysis:
VWAP integration for institutional-level price analysis
Volatility-based filtering to focus on optimal market conditions
Session-specific optimization for intraday trading windows
📈 Key Features
✅ Multi-timeframe analysis with optimized parameters
✅ Risk management tools including target and stop visualization
✅ Customizable filtering for different market conditions
✅ Clean visual interface with minimal chart clutter
⚙️ Customization Options
Volatility threshold controls for signal frequency
Session time filtering for optimal trading windows
Target distance settings based on market volatility
Quality filters for signal refinement
Visual customization options
📋 Recommended Use
Best Performance:
SPY on 5-minute timeframes during regular market hours
Active trading sessions with adequate volatility
Experienced traders familiar with momentum-based strategies
Configuration:
Use default settings as starting point
Adjust volatility filters based on market conditions
Customize session times for your trading schedule
⚠️ Risk Disclosure
This indicator is for educational and analytical purposes only. All trading involves substantial risk of loss. Past performance does not guarantee future results. Users should conduct their own analysis and consult with qualified professionals before making trading decisions.
🔧 Technical Notes
Built using advanced Pine Script features including:
Multi-oscillator confluence analysis
Dynamic volatility adaptation
Professional-grade risk visualization
Optimized for SPY market microstructure
TREV Candles - Range-Based Trend ReversalTREV Candles - Range-Based Trend Reversal Chart Implementation
What is a Trend Reversal (TREV) Chart?
A Trend Reversal chart, also known as a Point & Figure chart variation, is a unique charting method that focuses on price movement thresholds rather than time intervals. Unlike traditional candlestick charts where each candle represents a fixed time period, TREV candles form only when price moves by predefined amounts in ticks.
TREV charts eliminate time-based noise and focus purely on significant price movements, making them ideal for identifying genuine trend changes and continuation patterns.
How TREV Candles Work
This indicator implements true TREV logic with two critical thresholds:
Trend Size: The number of ticks price must move in the current direction to form a trend continuation candle
Reversal Size: The number of ticks price must move against the current direction to form a reversal candle and change the overall trend direction
Key TREV Rules Enforced:
Direction Changes Only Through Reversals: You cannot go from bullish trend directly to bearish trend - a reversal candle must occur first
Threshold-Based Formation: Candles form only when price thresholds are breached, not on time
Logical Wick Placement: Wicks only appear on the "open" side of candles where price temporarily moved against the formation direction
Multiple Candles Per Bar: When price moves significantly, several TREV candles can form within a single time-based bar
Four Distinct Candle Types
Bullish Trend (Green): Continues upward movement when trend threshold is hit
Bearish Trend (Red): Continues downward movement when trend threshold is hit
Bullish Reversal (Blue): Changes from bearish to bullish direction when reversal threshold is breached
Bearish Reversal (Orange): Changes from bullish to bearish direction when reversal threshold is breached
Practical Trading Applications
Trend Identification: Clear visual representation of when trends are continuing vs. reversing
Noise Reduction: Filters out insignificant price movements that don't meet threshold requirements
Support/Resistance: TREV levels often act as significant support and resistance zones
Breakout Confirmation: When price forms multiple trend candles in succession, it confirms strong directional movement
Reversal Signals: Reversal candles provide early warning of potential trend changes
Technical Implementation Features
Intelligent Price Path Processing: Analyzes the assumed price path within each bar (Low→High→Close for bullish bars, High→Low→Close for bearish bars)
Automatic Tick Size Detection: Works with any instrument by automatically detecting the correct tick size
Manual Override Option: Allows manual tick size specification for custom analysis
Impossible Scenario Prevention: Built-in logic prevents impossible wick configurations and direction changes
PineScript Optimization: Efficient state management and drawing limits handling for smooth performance
Comprehensive Styling Options
Each of the four candle types offers complete visual customization:
Body Colors: Independent color settings for each candle type's body
Border Colors: Separate border color customization
Border Styles: Choose from solid, dashed, or dotted borders
Wick Colors: Individual wick color settings for each candle type
Default Color Scheme:
🟢 Bullish Trend: Green body and wicks
🔵 Bullish Reversal: Blue body and wicks
🔴 Bearish Trend: Red body and wicks
🟠 Bearish Reversal: Orange body and wicks
Configuration Guidelines
Trend Size: Larger values create fewer, more significant trend candles. Smaller values increase sensitivity
Reversal Size: Should typically be smaller than trend size. Controls how easily the trend direction can change
Tick Size: Use "auto" for most instruments. Manual override useful for custom point values or backtesting
Ideal Use Cases
Swing Trading: Identify major trend changes and continuation patterns
Scalping: Use smaller thresholds to catch quick reversals and momentum shifts
Position Trading: Use larger thresholds to filter noise and focus on major trend moves
Multi-Timeframe Analysis: Compare TREV patterns across different threshold settings
Support/Resistance Trading: TREV close levels often become significant price zones
Why This Implementation is Superior
True TREV Logic: Enforces proper trend reversal rules that many implementations ignore
No Impossible Scenarios: Prevents wicks on both sides of candles and impossible direction changes
Professional Visualization: Clean, customizable appearance suitable for serious analysis
Performance Optimized: Handles large datasets without lag or drawing limit issues
Educational Value: Helps traders understand the difference between time-based and threshold-based charting
Perfect for traders who want to see beyond time-based noise and focus on what price is actually doing - moving in significant, measurable amounts that matter for trading decisions.
Ease of Movement Z-Score Trend | DextraGeneral Description:
The "Ease of Movement Z-Score Trend | Dextra" (EOM-Z Trend) is an innovative technical analysis tool that combines the Ease of Movement (EOM) concept with Z-Score to measure how easily price moves relative to volume, while identifying market trends with intuitive visualization. This indicator is designed to help traders detect uptrend and downtrend phases with precision, enhanced by candle coloring for direct trend representation on the chart.
Key Features
Ease of Movement (EOM): Measures how easily price moves based on the change in the midpoint price and volume, normalized with Z-Score for statistical analysis.
Z-Score Normalization: Provides an indication of deviations from the mean, enabling the identification of overbought or oversold conditions.
Adjustable Thresholds: Users can customize upper and lower thresholds to define trend boundaries.
Candle Coloring: Visual trend representation with green (uptrend), red (downtrend), and gray (neutral) candles.
Flexibility: Adjustable for different timeframes and assets.
How It Works
The indicator operates through the following steps:
EOM Calculation:
hl2 = (high + low) / 2: Calculates the average midpoint price per bar.
eom = ta.sma(10000 * ta.change(hl2) * (high - low) / volume, length): EOM is computed as the smoothed average of the price midpoint change multiplied by the price range per unit volume, scaled by 10,000, over length bars (default 20).
Z-Score Calculation:
mean_eom = ta.sma(eom, z_length): Average EOM over z_length bars (default 93).
std_dev_eom = ta.stdev(eom, z_length): Standard deviation of EOM.
z_score = (eom - mean_eom) / std_dev_eom: Z-Score indicating how far EOM deviates from its mean in standard deviation units.
Trend Detection:
upperthreshold (default 1.03) and lowerthreshold (default -1.63): Thresholds to classify uptrend (if Z-Score > upperthreshold) and downtrend (if Z-Score < lowerthreshold).
eom_is_up and eom_is_down: Logical variables for trend status.
Visualization:
plot(z_score, ...): Z-Score line plotted with green (uptrend), red (downtrend), or gray (neutral) coloring.
plotcandle(...): Candles colored green, red, or gray based on trend.
hline(...): Dashed lines marking the thresholds.
Input Settings
EOM Length (default 20): Period for calculating EOM, determining sensitivity to price changes.
Z-Score Lookback Period (default 93): Period for calculating the Z-Score mean and standard deviation.
Uptrend Threshold (default 1.03): Minimum Z-Score value to classify an uptrend.
Downtrend Threshold (default -1.93): Maximum Z-Score value to classify a downtrend.
How to Use
Installation: Add the indicator via the "Indicators" menu in TradingView and search for "EOM-Z Trend | Dextra".
Customization:
Adjust EOM Length and Z-Score Lookback Period based on the timeframe (e.g., 20 and 93 for daily timeframes).
Set Uptrend Threshold and Downtrend Threshold according to preference or asset characteristics (e.g., lower to 0.8 and -1.5 for volatile markets).
Interpretation:
Uptrend (Green): Z-Score above upperthreshold, indicating strong upward price movement.
Downtrend (Red): Z-Score below lowerthreshold, indicating significant downward movement.
Neutral (Gray): Conditions between thresholds, suggesting a sideways market.
Use candle coloring as the primary visual guide, combined with the Z-Score line for confirmation.
Advantages
Intuitive Visualization: Candle coloring simplifies trend identification without deep analysis.
Flexibility: Customizable parameters allow adaptation to various markets.
Statistical Analysis: Z-Score provides a robust perspective on price deviations from the norm.
No Repainting: The indicator uses historical data and does not alter values after a bar closes.
Limitations
Volume Dependency: Requires accurate volume data; an error occurs if volume is unavailable.
Market Context: Effectiveness depends on properly tuned thresholds for specific assets.
Lack of Additional Signals: No built-in alerts or supplementary confirmation indicators.
Recommendations
Ideal Timeframe: Daily (1D) or (2D) for stable trends.
Combination: Pair with others indicators for signal validation.
Optimization: Test thresholds on historical data of the traded asset for optimal results.
Important Notes
This indicator relies entirely on internal TradingView data (high, low, close, volume) and does not integrate on-chain data. Ensure your data provider supports volume to avoid errors. This version (1.0) is the initial release, with potential future updates including features like alerts or multi-timeframe analysis.
Candle Ghosts: MTF 3 Candle Viewer by Chaitu50cCandle Ghosts: MTF 3 Candle Viewer helps you see candles from other timeframes directly on your chart. It shows the last 3 candles from a selected timeframe as semi-transparent boxes, so you can compare different timeframes without switching charts.
You can choose to view candles from 30-minute, 1-hour, 4-hour, daily, or weekly timeframes. The candles are drawn with their full open, high, low, and close values, including the wicks, so you get a clear view of their actual shape and size.
The indicator lets you adjust the position of the candles using horizontal and vertical offset settings. You can also control the spacing between the candles for better visibility.
An optional EMA (Exponential Moving Average) from the selected timeframe is also included to help you understand the overall trend direction.
This tool is useful for:
Intraday traders who want to see higher timeframe candles for better decisions
Swing traders checking lower timeframe setups
Anyone doing top-down analysis using multiple timeframes on a single chart
This is a simple and visual way to study how candles from different timeframes behave together in one place.
🚀 QuantSignals AI Trend Pro 15M🚀 QuantSignals AI Trend Pro 15M
Welcome to QuantSignals AI Trend Pro, the ultimate AI-powered trend and signal system designed for serious day traders and scalpers.
🔒 This is a closed-source invite-only script. Only approved users may access this strategy.
🔍 What is it?
QuantSignals AI Trend Pro uses proprietary machine learning logic and smart signal filters to detect high-probability entries and exits on the 15-minute timeframe.
Designed by real traders, backed by data science, and battle-tested across crypto, forex, and equities.
💡 Key Features
🎯 AI-Powered Signal Engine
Smart buy/sell logic filtered by momentum, volatility, and multi-timeframe confluence.
📈 Smart Trend Strength System
Auto-classifies market into 🚀 Strong Bull, ⚖️ Neutral, or 🔥 Strong Bear zones.
🧠 Visual Dashboard Overlay
Real-time scoreboards for trend status, signal quality, momentum, and volatility.
🎯 Smart Support & Resistance Zones
Auto-calculated pivot levels based on dynamic market structure.
🔔 Built-In Alerts
Get real-time signals directly to your device — ready for TradingView alert automation.
✅ Optimized For:
🕒 15-minute timeframe
🔁 Scalping & Day Trading
💹 Crypto / Stocks / Forex / Futures
💎 How to Get Access?
This is a limited free version of our full QuantSignals system.
To unlock:
🔓 Full algorithm (multi-timeframe + sentiment + volume)
🔔 Real-time signals + smart alerts
📘 Educational content & live strategy sessions
➕ Join our community and request access:
🌐 Website: quantsignals.xyz
💬 Discord: discord.gg
🧠 Who is this for?
Active day traders and scalpers
Traders seeking institutional-grade tools
Anyone tired of fake signal groups and repainting indicators
📉 Disclaimer
This script is for educational and informational purposes only.
Trading carries risk. Use with proper risk management.
FLOWGuard By SASFlowGuard – Just flow. No forecast
Description:
FlowGuard is a custom indicator designed to monitor and react to the true flow of the market by combining trend direction, volatility expansion/contraction, and momentum confirmation. It acts like a sentry that constantly watches for changes in market regime, filtering out noise while staying adaptive to real-time conditions.
Use Case: Ideal for directional index option trades, swing trades, Designed for precision entries, disciplined exits, and clarity in trend flow.
Rejection Zones MODHigh probability "Institutional footprint" zones with some extras.
Zones settings
-Mitigation method: You can set whether the wick or the body mitigates the zones.
-Show last X Rejection Zones: The number of displayed zones
+
Optional ATR and Engulfing filter.
Fractals settings
-Filter 3/5 bar fractal: Choose to display the fractal candle from 3 or 5 candles pattern.
Moving Average settings
-Selectable MA with adjustable length, type and timeframe.
Liquidity Sweeps settings
-Selectable pivot length
Dashed line for swept levels, solid line for still active liquidity levels.
Bar colors
-Yellow: Engulfing candle
-Lime: Bullish momentum candle
-Purple: Bearish momentum candle
Professor-AI FUTURE TRADING[Cryptovarthagam]📌 TradingView Publication Description
Title: Professor-AI | Breakout Strategy Planner with Confirmation Filters
Overview
Professor-AI is an advanced breakout trading indicator designed to assist discretionary and semi-automated traders with structured trade planning. This tool does not provide guaranteed signals or financial advice but helps traders define entries, exits, and risk with clarity and consistency.
Key Features
1. Breakout Strategy Detection
Automatically identifies potential breakout opportunities using user-defined logic.
-Supports dynamic calculation between highest high/lowest low and pivot-based structures.
2. Volume & Momentum Filters
Filters trades based on volume confirmation and customisable momentum conditions.
-Avoids low-conviction breakouts by requiring stronger participation.
3. Rejection Candle Filter
Detects and filters out trades that show signs of candle rejections or wick traps.
-Optional control for wick-to-body ratio thresholds.
4. Smart Trade Setup Planning
Auto-generates suggested Entry, Stop Loss, TP1, and TP2 levels using ATR and user-defined multipliers.
-Customisable Min Profit % and Max Loss % filters to block low-quality setups.
5. Signal Confirmation Options
Allows traders to require candle close confirmation before triggering trade setups.
-Toggle-based control for signal strictness.
6. Trade Result Tracking
Actively monitors whether TP1, TP2, or SL is hit — and logs the result.
-Calculates gain/loss % and dollar value using the provided capital and leverage inputs.
7. Profit/Loss Calculator
Estimates position sizing and potential outcomes based on user capital and risk multiplier.
-Not linked to real trades — intended for planning and journaling.
8. Market Trend Analyzer
-Built-in trend detection using EMA crossover, ADX strength, and pivot structure.
Highlights uptrend, downtrend, or sideways zones on the chart (optional).
Customizable Settings
- SL Multiplier (ATR-based)
- TP1 & TP2 Multipliers
- Risk Filters:
Minimum TP1 Profit % Filter
Maximum SL % Filter
Wick Rejection Filter (Enable/Disable)
RSI Filter (Enable/Disable)
- Signal Confirmation (Candle Close)
- Switch Between Pivot/High-Low Calculation
- Profit Calculation Inputs (Capital & Leverage)
Intended Use
This script is designed for educational and planning purposes only. It is best suited for traders who:
Prefer rule-based, structured entries
Use visual confirmation alongside trade planning
Track trade performance over time
This tool does not execute trades, nor does it replace professional advice or financial strategy.
Compliance Notice
This script complies with TradingView’s House Rules:
It does not promise profitability or guaranteed returns.
It does not promote financial products or services.
It provides clear, transparent calculations for user-configured trade setups.
It is fully educational, designed for those who want to build discipline through structured trade planning.
Iambuoyant High Win Rate TraderIambuoyant High Win Rate Trader (Debug Signals) - Indicator Description
Introduction
The "Iambuoyant High Win Rate Trader" is a comprehensive Pine Script indicator designed to identify high-probability trading opportunities across various market conditions. Built with a multi-faceted approach, it integrates several key technical analysis concepts to provide robust buy and sell signals, aiming to maximize potential returns while managing risk. This indicator is particularly useful for traders looking for confirmed entries based on a confluence of factors rather than relying on a single signal.
Strategies Used
This indicator employs a sophisticated combination of strategies, each contributing to a stronger signal when aligned:
Trend Analysis:
Multiple EMAs: It utilizes three Exponential Moving Averages (EMAs) – a fast, slow, and a longer-term trend EMA – to establish the prevailing market direction. Signals are filtered to align with this identified trend, enhancing their probability of success.
Trend Alignment: Confirms that price action is consistent with the established EMA trend, ensuring trades are taken in the direction of momentum.
Oscillator Confirmation:
Relative Strength Index (RSI): Employs RSI to identify overbought and oversold conditions, with a specific focus on the RSI turning away from extreme levels, suggesting a potential reversal or continuation point.
Stochastic Oscillator: Similar to RSI, the Stochastic Oscillator is used to pinpoint overbought and oversold zones, with additional confirmation from the %K and %D lines crossing or turning.
Momentum and Divergence (MACD):
Moving Average Convergence Divergence (MACD): The indicator analyzes MACD line and signal line crossovers, alongside histogram movement, to gauge momentum shifts and potential trade entries.
Volume Analysis:
Volume Confirmation: Integrates volume analysis by comparing current volume to a Volume Moving Average. Higher-than-average volume during a signal can confirm conviction behind the price move.
Market Structure and Volatility:
Support and Resistance (S/R) Levels: Dynamic support and resistance levels are identified using pivot points. These levels are used to inform potential stop-loss placements and to ensure trades aren't initiated directly into strong opposing S/R zones.
Average True Range (ATR): ATR is used to measure market volatility, which helps in adjusting trade sizing and stop-loss distances. A volatility filter is included to prevent trades in excessively choppy or illiquid conditions.
Risk Management:
Dynamic Stop Loss: The indicator attempts to identify logical stop-loss levels based on recent price action or nearby support/resistance.
Risk:Reward Ratio Filtering: A configurable minimum Risk:Reward ratio ensures that only trades with a favorable potential return relative to the risk are considered, promoting disciplined trading.
Signal Confirmation:
Confirmation Bars: An optional confirmBars input allows for signals to be confirmed over a specified number of bars, reducing false positives by waiting for price action to sustain the initial signal. (Note: For debugging, this is often set to 0 for immediate signals.)
How to Use the Indicator
Add to Chart: Apply the "Iambuoyant High Win Rate Trader (Debug Signals)" indicator to your desired chart in TradingView. It's an overlay indicator, meaning it will plot directly on your price chart.
Understand the Signals:
Buy Signals (Green Triangles/Labels): Appear below the price bars, indicating a potential long entry.
Sell Signals (Red Triangles/Labels): Appear above the price bars, indicating a potential short entry.
"Flash" Signals: Smaller, colored triangles indicate the immediate bar where the signal conditions are first met.
"Confirmed" Signals: Larger, shaded triangles with labels indicate that the signal has passed the confirmBars criteria (if confirmBars is set to greater than 0).
Utilize Debugging Features (Crucial for Optimization):
Access Inputs: Open the indicator's settings by clicking the gear icon next to its name on the chart.
"Signal Components (Debugging)" Section: This is the most powerful feature for tailoring the indicator to your needs.
Initial Setup: When first applying the indicator or if signals are too rare, start by setting most "Enable X Condition" toggles to false, potentially leaving only one or two simple conditions (e.g., "Enable RSI Condition" or "Enable Trend Alignment") as true. This will force signals to appear, allowing you to confirm the plotting mechanism works.
Gradual Re-enabling: Once you see signals, gradually re-enable one "Enable X Condition" at a time.
Observe Debug Plots (Lower Pane): Below your main chart, the indicator plots colored columns (e.g., "Debug: RSI Bull", "Debug: MACD Bear"). These show when each individual component of the long/short signal is true (1 or 2) or false (0 or na). The "Debug: Final Long Signal" and "Debug: Final Short Signal" plots show when the combined signal conditions are met.
Identify Bottlenecks: If signals disappear after enabling a new condition, observe its corresponding debug plot. If it's frequently 0 when other conditions are 1, you've found a bottleneck.
Adjust Parameters: For bottlenecks, go back to the relevant input section (e.g., "Oscillators," "Market Structure," "Signal Quality") and adjust parameters (e.g., rsiOB/rsiOS, stochOB/stochOS, volatilityFilter, minRRRatio) to be less strict until signals appear at your desired frequency. Alternatively, you may decide to leave that specific condition disabled if it's too restrictive for your strategy.
Configure Display Options: Use the "Display" group in the inputs to toggle the visibility of labels, support/resistance lines, and EMA trend lines on your chart.
Set Up Alerts: The indicator includes built-in alert conditions for "Confirmed Buy Signal" and "Confirmed Sell Signal." You can set up alerts in TradingView to be notified instantly when these signals occur, allowing you to monitor the market without constant chart watching.
Directional Market Efficiency [QuantAlgo]🟢 Overview
The Directional Market Efficiency indicator is an advanced trend analysis tool that measures how efficiently price moves in a given direction relative to the total price movement over a specified period. Unlike traditional momentum oscillators that only measure price change magnitude, this indicator combines efficiency measurement with directional bias to provide a comprehensive view of market behavior ranging from -1 (perfectly efficient downward movement) to +1 (perfectly efficient upward movement).
The indicator transforms the classic Efficiency Ratio concept by incorporating directional bias, creating a normalized oscillator that simultaneously reveals trend strength, direction, and market regime (trending vs. ranging). This dual-purpose functionality helps traders and investors identify high-probability trend continuation opportunities while filtering out choppy, inefficient price movements that often lead to false signals and whipsaws.
🟢 How It Works
The indicator employs a sophisticated two-step calculation process that first measures pure efficiency, then applies directional weighting to create the final signal. The efficiency calculation compares the absolute net price change over a lookback period to the sum of all individual bar-to-bar price movements during that same period. This ratio reveals how much of the total price movement contributed to actual progress in a specific direction.
The directional component applies the mathematical sign of the net price change (positive for upward movement, negative for downward movement) to the efficiency ratio, creating values between -1 and +1. The resulting Directional Efficiency is then smoothed using an Exponential Moving Average to reduce noise while maintaining responsiveness. Additionally, the system incorporates a configurable threshold level that distinguishes between trending markets (high efficiency) and ranging markets (low efficiency), enabling regime-based analysis and strategy adaptation.
🟢 How to Use
1. Signal Interpretation and Market Regime Analysis
Positive Territory (Above Zero): Indicates efficient upward price movement with bullish directional bias and favorable conditions for long positions
Negative Territory (Below Zero): Signals efficient downward price movement with bearish directional bias and favorable conditions for short positions
High Absolute Values (±0.4 to ±1.0): Represent highly efficient trending conditions with strong directional conviction and reduced noise
Low Absolute Values (±0.1 to ±0.3): Suggest ranging or consolidating markets with inefficient price movement and increased whipsaw risk
Zero Line Crosses: Mark critical directional shifts and provide primary entry/exit signals for trend-following strategies
2. Threshold-Based Market Regime Classification
Above Threshold (Trending Markets): When efficiency exceeds the threshold level, markets are classified as trending, favoring momentum strategies
Below Threshold (Ranging Markets): When efficiency falls below the threshold, markets are classified as ranging, favoring mean reversion approaches
3. Preset Configurations for Different Trading Styles
Default
Universally applicable configuration optimized for medium-term analysis across multiple timeframes and asset classes, providing balanced sensitivity and noise filtering.
Scalping
Highly responsive setup for ultra-short-term trades with increased sensitivity to quick efficiency changes. Best suited for 1-15 minute charts and rapid-fire trading approaches.
Swing Trading
Designed for multi-day position holding with enhanced noise filtering and focus on sustained efficiency trends. Optimal for 1-4 hour and daily timeframe analysis.
🟢 Pro Tips for Trading and Investing
→ Trend Continuation Filter: Enter long positions when Directional Efficiency crosses above zero in trending markets (above threshold) and short positions when crossing below zero, ensuring alignment with efficient price movement.
→ Range Trading Optimization: In ranging markets (below threshold), take profits on extreme readings and enter mean reversion trades when efficiency approaches zero from either direction.
→ Multi-Timeframe Confluence: Combine higher timeframe trend direction with lower timeframe efficiency signals for optimal entry timing.
→ Risk Management Enhancement: Reduce position sizes or avoid new entries when efficiency readings are weak (near zero), as these conditions indicate higher probability of choppy, unpredictable price movement.
→ Signal Strength Assessment: Prioritize trades with high absolute efficiency values (±0.4 or higher) as these represent the most reliable directional moves with reduced likelihood of immediate reversal.
→ Regime Transition Trading: Watch for efficiency threshold breaks combined with directional changes as these often mark significant trend initiation or termination points requiring strategic position adjustments.
→ Alert Integration: Utilize the built-in alert system for real time notifications of zero-line crosses, threshold breaks, and regime changes to maintain constant market awareness without continuous chart monitoring.
Charles Ayede Convergence (CACo v4.0)This version defines the core "Convergence" signal as a pure alignment of the Classic Supertrend, OsMA, and smoothed Heiken Ashi momentum. It includes a full suite of custom alerts and compatible visual signals.
