Inizia

Analisi trend

Ghost Smart Nexus Ghost Smart Nexus is not just another indicator; it's a high-frequency algorithmic system designed to bridge the gap between retail traders and institutional market makers. By integrating Real-time Volume Analysis, Bookmap-style Liquidity Tracking, and Momentum Candlestick Logic, it filters out market noise to provide high-probability Buy/Sell Algo signals. Key Features: Precision Buy/Sell Algos: Dynamic entries based on institutional flow. Multi-Timeframe Trend Detection: Seamless performance from Scalping (1m) to Swing Trading (D1). Nexus Bookmap Integration: Visualizes hidden liquidity zones directly on your chart. Volume-Momentum Engine: Validates every signal with real market depth to avoid "False Breakouts." Ghost Candle Logic: Analyzes the internal momentum of each candlestick to predict the next explosive move.
Indicatore Pine Script®
di AlgoSmart-Official
AG_fvg&zz_scrMultitimeframe fair value gap(fvg)+zigzag screener.Helps traders to choose trade directions both with fvg values and zigzag predictions. 1)Indicates Bullish&Bearish fvgs,both on grafiphc and table current fvg values(top,middle,,ages,% value to price of fvg)Shows % percent of mitigation 2)Shows before closes possible fvg values of higher timeframes if not already seen on screener 3)Hybrid zigzag calculation,automatically detects trends&horizontial flots and chooses zigzag calculation,predicts next zigzag level
Indicatore Pine Script®
di anilgorgun
Smart Pivot Trend█ OVERVIEW Smart Pivot Trend is a market structure–based trend indicator that combines swing pivots, volatility adaptation (ATR), and dynamic range levels to determine which side of the market is in control — buyers or sellers. Instead of moving averages, trend direction is defined through structural breaks inside pivot ranges. The indicator visualizes the active trend, evolving market structure, and historical support/resistance levels created at moments of control shifts. It helps identify trend transitions, structure breaks, and areas where price has an increased probability of reaction. █ CONCEPT Built around adaptive swing structure. The core idea is that trend emerges from market structure, not from price relative to an average. - Swing highs and swing lows form the current structural range. - Two internal percentage-based levels inside this range act as decision zones. - Break above the upper level → bullish control. - Break below the lower level → bearish control. To prevent structure from becoming outdated during strong moves, pivots are dynamically adjusted when price deviates beyond ATR × multiplier. This mechanism makes the structure volatility-aware rather than static. As a result, the indicator combines: - a dynamic, living market structure (active pivot trend) - static “market memory” levels marking previous control shifts █ FEATURES Calculations - Swing pivots as the foundation of market structure - Internal range levels as structural decision zones - ATR-based adaptive pivot correction (volatility-aware structure) - Smooth Factor — controls the degree of structural correction relative to price; defines how fast pivots adapt during strong moves - Trend change detection through structural range breaks Visualization - Active trend line based on current structure - Historical support/resistance levels plotted at trend flips - Triangles marking breaks of those levels - Gradient fill between price and the active trend line - Trend-based coloring (green = bullish, red = bearish) - Optional candle coloring based on current structural trend (bullish / bearish control) Signals - BUY / SELL — on structural trend changes - Bullish Break / Bearish Break — when historical levels are broken - Impulse breaks (when candles break levels with strong momentum) Alerts - Trend change to bullish - Trend change to bearish - Resistance break - Support break █ HOW TO USE Main settings: - Swing Length — sensitivity of swing detection - Lower / Upper Level — internal structural decision levels - ATR Length / Multiplier — influence of volatility on pivot adaptation - Smooth Factor — speed of structural adjustment to price - Visual options — colors, hiding lines, deleting broken levels, color candles by trend Trend logic: - Price above active pivot low → bullish structure - Price below active pivot high → bearish structure █ APPLICATION Trend-following - The indicator can act as a directional filter for signals from other tools. - Entries are taken only when signals from external indicators (e.g., RSI, MACD, momentum tools, price action setups, breakout systems) align with the current Smart Pivot Trend direction. - Highest probability occurs when entries happen during pullbacks to the active trend line in the direction of the prevailing structure. Market structure shifts - A trend flip represents a transfer of control between buyers and sellers. - These moments often precede larger moves because the swing structure changes. Breakout trading - Historical levels mark areas where control previously changed. - Their break often leads to volatility expansion and impulsive movement. Pullback trading - The active trend line acts as dynamic support/resistance. - Pullbacks to this line in strong trends often provide favorable risk-to-reward setups. █ ADAPTATION TO TRADING STYLE The Swing Length and Smooth Factor parameters allow the indicator to be tailored to different trading styles: Shorter Swing Length + higher Smooth Factor - structure reacts faster - more frequent trend shifts - suitable for scalping and intraday trading Longer Swing Length + lower Smooth Factor - slower structural changes - filters minor fluctuations - better suited for swing trading and longer-term positions This allows the indicator to function both as a fast micro-structure engine and as a stable higher-level trend filter. █ NOTES - This is a structural analysis tool, not a standalone trading system - Best results come when combined with key S/R levels, higher timeframe context, and price action - In ranging markets, trend flips may occur more frequently — a natural behavior of structure-based systems
Indicatore Pine Script®
di Uncle_the_shooter
Blagirev Fractal Wave Detector - v3.0 It's concept work basing on empirical data which I've discovered through charts and some fundamentals from Ilya Prigozin and Mandesbrot theory concerning inlinar world, fractals and chaos theory. I'm elaborating and investigating the fractals and its relation with market moving. For any comment and feedback are welcome Indicator shows upcomming waves which can disrupt and create new structure for the price. Indicator works on m5 for Red Waves and for H1 for Green Waves. Triangle indicated upcomming waves impluse. More and bigger triangle shows power and speed of impluse of the wave. 3 Triangle means that fractal wave has started and reached several levels of the prices.
Indicatore Pine Script®
di vblagirev
ZLEMA FusionZLEMA Fusion - Advanced Zero-Lag Momentum & Trailing Stop System A sophisticated overlay indicator combining the power of Zero Lag EMA (ZLEMA) with ATR-based Moving Stop (MOST) for precision trend following and dynamic support/resistance tracking. Core Components: 1. ZLEMA (Zero Lag Exponential Moving Average) Eliminates lag inherent in traditional EMAs Provides faster response to price changes Customizable length for different trading styles Smooth, responsive trend line 2. MOST (Moving Stop - ATR Trailing Stop) Dynamic ATR-based trailing stop system Automatically adjusts to market volatility Never moves backward - only trails in favourable direction Green line = Uptrend support | Red line = Downtrend resistance Customizable ATR multiplier and lookback period Signal Generation: BUY (⇑): When ZLEMA crosses above MOST SELL (⇓): When ZLEMA crosses below MOST Clean visual arrows with no label boxes Signals trigger on candle close only (no repainting) Advanced Features: ✅ Signal Cooldown System - Prevents signal spam with configurable minimum bars between signals ✅ ADX Trend Strength Filter - Optional filter to trade only in strong trends ✅ Higher Timeframe ZLEMA Confirmation - Multi-timeframe trend alignment for higher probability setups ✅ Background Color Coding - Quick visual trend identification (Green = Uptrend, Red = Downtrend) ✅ Alert System - Built-in alerts for buy and sell signals Fully Customizable: ZLEMA length ATR period and multiplier MOST lookback period Signal cooldown bars ADX filter threshold Higher timeframe settings Visual display options Best Used For: Index trading Swing trading Trend following strategies Dynamic support/resistance identification Entry/exit timing Optimized for Indian Markets - Calibrated for Nifty, Bank Nifty, and other NSE instruments. ⚠️ Important Notes: This indicator is for educational purposes No repainting - all signals confirmed at candle close Use proper risk management Combine with your trading plan and additional confirmation
Indicatore Pine Script®
di kingshukghosh71
Buy and sell alerts using Ema's***What this indicator does:*** 1) It calculates two EMAs and an RSI emaS = short EMA (default 9) → reacts faster to price emaL = long EMA (default 21) → reacts slower, defines trend bias rsi = RSI (default 14) → momentum confirmation 2) It defines a “trend state” (bull/bear) with optional RSI confirmation Bull trend when: 9 EMA is above 21 EMA AND RSI is ≥ 55 (only if useRSI = true) Bear trend when: 9 EMA is below 21 EMA AND RSI is ≤ 45 (only if useRSI = true) This is why you see the green/red background tint—it’s marking the current trend state. 3) It generates Buy/Sell signals on EMA crossovers (plus optional RSI filter) Buy signal happens only when: 9 EMA crosses above 21 EMA, and RSI is ≥ 55 (if enabled) Sell signal happens only when: 9 EMA crosses below 21 EMA, and RSI is ≤ 45 (if enabled) **Best timeframe to use (to reduce false signals)** Because this is a crossover system, it will always whipsaw in chop—lower timeframes whip more. ✅ Best overall: 15-minute Best balance of signal quality and frequency EMA crosses mean more when candles are “real” and not micro-noise RSI confirmation works better Also very good: 5-minute (if you trade intraday a lot) More signals than 15m, still usable Expect some chop during lunchtime / ranges Cleanest but fewer trades: 1-hour Very low noise, great for swing/intraday trend holds Fewer entries, but highest reliability Avoid (unless you add filters): 1-minute / 3-minute EMA crosses happen constantly in chop RSI thresholds (55/45) get hit too easily and still whipsaw My default recommendation: Day trading: 15m Faster scalps: 5m (with a filter) Swing/position: 1h *** Some Indicators that pair well with this (and why)*** 1) ADX (Trend Strength Filter) — top pairing Use ADX to avoid taking signals in chop. Only take buys/sells when ADX > 18–25 If ADX is low, ignore EMA crosses (they’ll whipsaw) 2) VWAP (Intraday Bias Filter) — best for stocks/indices intraday Prefer BUY only if price is above VWAP Prefer SELL only if price is below VWAP This cuts a ton of false signals on 5m/15m. 3) ATR (Stop/Target + Volatility Filter) Not for entries—use it for: Stop placement (e.g., 1–1.5× ATR) Profit targets or trailing stops Also helps you avoid tiny-chop sessions where ATR is very low. 4) Higher Timeframe Trend Filter (simple but powerful) Example: Trade 15m signals only in the direction of the 1h EMA trend This is one of the easiest ways to reduce false trades. 5) Support/Resistance / Pivot Points EMA cross signals work best when they break/hold key levels. Use daily pivots, prior day high/low, OR key S/R zones Take signals that align with a break + retest The EMA’s alert with Buy/Sell Levels (v2) is a simple trend-following indicator designed to help traders identify directional bias and high-probability buy and sell opportunities using moving averages and momentum confirmation. The script combines: A fast and slow Exponential Moving Average (EMA) crossover for trend direction An optional RSI confirmation filter to reduce false signals Visual trend highlighting and clear on-chart buy/sell labels Built-in alert conditions for automation and notifications How It Works Bullish Trend Short EMA is above the Long EMA RSI is above the user-defined buy threshold (default: 55) Bearish Trend Short EMA is below the Long EMA RSI is below the user-defined sell threshold (default: 45) Buy Signal Short EMA crosses above Long EMA RSI confirms bullish momentum (if enabled) Sell Signal Short EMA crosses below Long EMA RSI confirms bearish momentum (if enabled) The background color visually reflects the current trend state: Green = Bullish Red = Bearish Recommended Timeframes 15-minute – Best balance of reliability and signal quality 5-minute – Faster signals (recommended with additional filters like VWAP or ADX) 1-hour – Higher-confidence swing and trend trades Lower timeframes may produce more false signals due to market noise. Best Use Cases Trend continuation trades Momentum breakouts Intraday and swing trading Important Notice: This indicator is intended for educational and informational purposes only. It is not financial or investment advice. Market conditions can change rapidly, and no indicator can guarantee profitable results. Always use proper risk management and confirm signals with additional analysis before making any trading or investment decisions. You are solely responsible for any trades you place using this indicator.
Indicatore Pine Script®
di CHRIS_B58
Batoot Algo PureBatoot Algo (Pure Analysis Mode) Indicator Overview Batoot Algo is an advanced technical analysis indicator based on: Price Action and geometric chart patterns Higher Timeframe (HTF) trend filtering Volume confirmation Breakout & Retest logic Head & Shoulders pattern detection Analysis-only indicator. No Buy/Sell labels on the chart. Alerts and Dashboard only. The goal is clean charts and smarter trading decisions. --- Entry Modes Aggressive (Breakout) Immediate entry on breakout Requires: Confirmed breakout High volume Optional trend alignment Conservative (Retest) Breakout → Wait for retest → Confirmation candle Reduces false signals Suitable for patient trading --- HTF Trend Filter Uses EMA crossover on higher timeframe: EMA 50 EMA 200 EMA50 > EMA200 → Bullish EMA50 < EMA200 → Bearish Filter can be enabled or disabled in settings. --- Price Patterns Detected Automatically detects and draws: Bullish / Bearish Flags Channels Triangles / Pennants Rising Wedge (Bearish) Falling Wedge (Bullish) The area between support and resistance lines is dynamically filled based on the pattern. --- Yellow Candle (High Volume) Yellow candles indicate High Volume. Triggered when: Current candle volume >= Average volume of last 20 candles × volume multiplier Default multiplier: 1.5 Confirms strong breakouts. Not a standalone entry signal. --- Head & Shoulders Detection Supports: Head & Shoulders (Bearish) Inverse Head & Shoulders (Bullish) Neckline drawn automatically. Breakout validated with volume. Pattern status shown in Dashboard. --- Dashboard Displays: Entry Mode (Aggressive / Conservative) HTF Trend Current Pattern Head & Shoulders Status Market Status: ENTRY BUY, ENTRY SELL, WAIT RETEST, SCANNING --- Alerts Alerts trigger only when: Pattern confirmed Breakout / Retest logic satisfied High volume confirmed Trend filter (if enabled) passes No trade labels plotted on chart. --- License & Attribution Licensed under Creative Commons Attribution 4.0 (CC BY 4.0) Free to use and modify. Attribution required. Removing or changing the author name is not allowed. --- This indicator is for technical analysis purposes only and is not financial advice. Always use proper risk management. --- Clean chart, smart analysis, better trading decisions.
Indicatore Pine Script®
di nazaralgeze
4
Worldclassedge [Patrick nill]plotshape(long, title="BUY", text="Long▲", style=shape.labelup, textcolor=color.white, size=size.auto, location=location.belowbar, color=color.green) plotshape(short, title="SELL", text="Short▼", style=shape.labeldown, textcolor=color.white, size=size.auto, location=location.abovebar, color=color.red) alertcondition(long, title="BUY", message="Long▲") alertcondition(short, title="SELL", message="Short▼") // VWAP anchor = input.string("Session", title="Anchor Period") MILLIS_IN_DAY = 86400000 dwmBarTime = timeframe.isdwm ? time : request.security(syminfo.tickerid, "D", time) dwmBarTime := na(dwmBarTime) ? nz(dwmBarTime ) : dwmBarTime var periodStart = time - time makeMondayZero(dayOfWeek) => (dayOfWeek + 5) % 7 isMidnight(t) => hour(t) == 0 and minute(t) == 0 isSameDay(t1, t2) => dayofmonth(t1) == dayofmonth(t2) and month(t1) == month(t2) and year(t1) == year(t2) isOvernight() => not (isMidnight(dwmBarTime) or request.security(syminfo.tickerid, "D", isSameDay(time, time_close), lookahead=barmerge.lookahead_on)) tradingDayStart(t) => timestamp(year(t), month(t), dayofmonth(t), 0, 0) numDaysBetween(t1, t2) => diff = math.abs(tradingDayStart(t1) - tradingDayStart(t2)) diff / MILLIS_IN_DAY tradingDay = isOvernight() ? tradingDayStart(dwmBarTime + MILLIS_IN_DAY) : tradingDayStart(dwmBarTime) isNewPeriod() => var isNew = false if tradingDay != nz(tradingDay ) isNew := switch anchor "Session" => na(tradingDay ) or tradingDay > tradingDay "Week" => makeMondayZero(dayofweek(periodStart)) + numDaysBetween(periodStart, tradingDay) >= 7 "Month" => month(periodStart) != month(tradingDay) or year(periodStart) != year(tradingDay) "Year" => year(periodStart) != year(tradingDay) => false isNew srcVWAP = hlc3 var float sumSrc = 0 var float sumVol = 0 if isNewPeriod() periodStart := tradingDay sumSrc := 0 sumVol := 0 if not na(srcVWAP) and not na(volume) sumSrc += srcVWAP * volume sumVol += volume vwapValue = sumSrc / sumVol plot(vwapValue, title="VWAP", color=color.red, linewidth=3) // = enableCloud = input.bool(false, "Enable Cloud") lenn = input.int(20, "Period") mult = input.float(2.5, "StdDev Multiplier") tc = input.int(25, "Gauge Size", minval=3) upColor = input.color(#00ffbb, "Up Color") downColor = input.color(#ff1100, "Down Color") basis = ta.sma(close, lenn) upper1 = basis + ta.stdev(close, lenn) * mult lower1 = basis - ta.stdev(close, lenn) * mult // TP var int position = 0 if long position := 1 else if short position := -1
Indicatore Pine Script®
di AI-user
Enigma DaytradingThis indicator provides a complete intraday trading system for 3 assets from the futures market (GC, 6B, and CL) during the New York session using integrated historical price databases as its foundation. All of this is included in 1 single indicator. In the following image, the different options for the integrated databases can be seen. The indicator will only display 1 database at a time, the one you choose in its settings. Note : You can add several instances of the indicator at a time and choose a different database for each instance, one for each day of the week for example, to avoid the need to manually change the database every single day. You also have the option of adding the name of the database that you currently have selected as a watermark in the chart. This option is easily seen in the settings of the indicator and can be either turned on or off. The relevant price areas and levels derived from the integrated historical price databases are determined based on the time at which price exits the Opening Range, which is the first hour of the New York session that goes from 9:30 AM EST to 10:25 AM EST. Once price exits the Opening Range, the indicator will display the relevant price levels for that session based on which day it is, the time at which price exited the Opening Range, and the final factor is whether price is either above or below the Opening Range price area. The historical data that will be displayed is filtered so that only those with matching conditions are taken into account. This makes it possible for the indicator to display historical data produced by previous sessions with several similar circunstances than the ones we are encountering in the current session. Once the relevant price levels for the session are displayed, they do not change and will remain the same for the entirety of the session. How to interpret the indicator The relevant price levels are displayed in the following way: • Entry levels and stop-loss levels as colored boxes. These boxes may contain several levels within them. The basic logic is to enter once price touches the colored box, and place the stop-loss behind the colored box. Depending on the size of the colored box and the number of levels it contains, the stop-loss can be placed only 2 or 3 levels behind the entry level. The levels in the colored boxes can be easily identified as a change in tone within the box. The following image provides a graphical example of this, and the difference in color tones within each box is quite clear. • Exit levels as colored horizontal lines: Each colored box will have a colored line with its matching color. Depending on which box you used for entry, the corresponding exit level should be the colored line of the same matching color. This color-coded visualization makes it possible to easily identify the corresponding exit level based on the time of your entry. The chosen colors and their lighter-tone variations can be easily modified from the indicator's settings. These correlations between the displayed price levels, or in other words, between where and when to enter and where to exit, as well as the methodology on how to structure the integrated databases, are the result of proprietary historical analysis and the true value of this system. Benefits of the indicator • It provides direct and actionable data. The price levels displayed on the chart are not subject to any interpretation. They present objective levels and trade ideas. • It provides the most likely bias for the session. Once the levels are displayed, the bias is towards the location of the exit levels (horizontal colored lines). Aim of the indicator The goal is to provide a simple, mechanical, and repeatable trading system with historical data-driven logic resulting in objective and actionable entry, stop-loss, and exit price levels. Disclaimer Every trade setup presented by the usage of this indicator doesn't constitute investment advice. Past results will never guarantee future performance.
Indicatore Pine Script®
di EnigmaDaytradingMacros
Trapped Traders EBPThe Trapped Traders Indicator is used to predict overall Market bias, with green being longs, and red being shorts. The autofibs are 0%,25%,50%,and 100%. After an autofib and directional bias is generated, you'll want to look for an entry on a lower time frame somewhere between the 25% and 50% ideally. A simple trading plan: Use the indicator on the 4 Hour chart. Wait until you get an autofib. Zoom down to the 5 minute chart and wait for price to reach the 25% retracement. Look for an entry using an entry model of your choice. For example: an engulfing 5 minute bar in the direction of your bias, an order block, fair value gap, or choch in your favor. This method of trading was introduced to me by Omar Agag. Cheers to prosperity, brother! Good luck! And happy trading!
Indicatore Pine Script®
di reactivetrading
TrendForce Pro: All-in-One Market System Overview The TrendForce Pro is a comprehensive market analysis system designed to consolidate Trend, Momentum, Volatility, and Market Structure into a single actionable dashboard. It addresses the common issue of chart clutter by integrating multiple analytical dimensions into one optimized tool. Originality & Concept Unlike standard moving average crossovers which often fail in ranging markets, this script implements a custom "Sideways Filter Algorithm". This logic analyzes the frequency of crossovers within a specific lookback period relative to the ATR (Average True Range) distance between EMAs. When a choppy market is detected, the system neutralizes trend signals, preventing false entries during consolidation. Additionally, it features a "Reverse RSI Predictive Engine". Instead of waiting for the RSI to lag, the script mathematically calculates the exact price levels required for the RSI to reach Overbought (70/80/90) or Oversold (30/20/10) zones, plotting these as dynamic support/resistance zones on the chart. Main Features Smart Trend Detection: Color-coded EMAs with a built-in Supertrend filter to align execution with the macro trend. Market Structure Labels: Automatically identifies and labels Higher Highs (HH) and Lower Lows (LL) to assist in price action analysis. Dynamic Heatmap: Visualizes RSI exhaustion zones directly on the price candles (Red/Green fills). Risk Management Panel: Provides real-time automated suggestions for Stop Loss (based on ATR multiplier) and Take Profit targets directly on the latest price label. How to Use Trend Following: Wait for the "BULL" or "BEAR" label on the price line. Ensure the EMAs are green (Bullish) or Red (Bearish) and not Gray (Sideways). Reversal Trading: Monitor the RSI Heatmap. If price pushes deep into the dark red zone (RSI > 80/90) and a Bearish Divergence label appears, consider a reversal setup. Risk Control: Utilize the displayed "Stop" and "Target" values to set your bracket orders. Disclaimer This tool is for educational purposes and technical analysis support. Past performance does not guarantee future results. Resumo O TrendForce Pro é um sistema "All-in-One" que combina Tendência, Momento e Estrutura de Mercado com um filtro exclusivo de lateralização e projeção reversa de RSI. Desenvolvido para limpar o gráfico e focar na tomada de decisão institucional. Características Principais Filtro de Lateralização: Algoritmo que detecta consolidação baseada na distância ATR das médias, evitando falsas entradas. RSI Reverso: Projeta no gráfico o preço exato necessário para o RSI atingir níveis de sobrecompra/sobrevenda. Gestão de Risco: Painel automático que sugere Stop Loss e Alvos baseado na volatilidade atual. Como Usar Busque confluência entre a cor das médias (Tendência) e os rótulos de estrutura (HH/LL). Evite operações quando as linhas estiverem cinza (Mercado Lateral).
Indicatore Pine Script®
di gustavohyppolito
Breaker Order Block MTF Polarity FlipThis indicator identifies Breaker Order Blocks using a multi-timeframe approach based on polarity flip logic (support turning into resistance, and resistance turning into support). A Breaker is formed when a previous Order Block is violated and later respected from the opposite side, creating a high-probability reaction zone. ━━━━━━━━━━━━━━━━━━━━━━ CORE CONCEPT ━━━━━━━━━━━━━━━━━━━━━━ • Bullish Breaker: a bullish Order Block is broken and later acts as resistance • Bearish Breaker: a bearish Order Block is broken and later acts as support • Focus on polarity inversion, not raw Order Blocks ━━━━━━━━━━━━━━━━━━━━━━ FEATURES ━━━━━━━━━━━━━━━━━━━━━━ • Multi-Timeframe analysis: – TF1 (higher timeframe via request.security) – TF2 (higher timeframe via request.security) – TF3 (current chart timeframe) • Configurable number of breakers displayed per timeframe (up to 5) • Clear distinction between bullish and bearish breakers • Breaker detection based on swing structure and body or wick logic • Automatic removal of invalidated breaker zones • Clean and customizable visual boxes (colors, border width, labels) • Optional labels showing side (BULL / BEAR), timeframe and order ━━━━━━━━━━━━━━━━━━━━━━ DEFENSE & VOLUME LOGIC ━━━━━━━━━━━━━━━━━━━━━━ • Defense detection based on: – Wick rejection – Small candle body – Optional close direction confirmation • Volume spike detection near breaker zones • Proximity detection using ATR-based distance ━━━━━━━━━━━━━━━━━━━━━━ ALERTS ━━━━━━━━━━━━━━━━━━━━━━ Alerts are available for TF1 and TF2: • Breaker proximity alerts • Breaker defense (rejection) alerts • Volume spike alerts near breaker zones TF3 (chart timeframe) is visual only and does not trigger alerts. ━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE ━━━━━━━━━━━━━━━━━━━━━━ This indicator is designed to provide contextual levels where price is likely to react after a structural break. It works best when combined with: • Market structure analysis • Price action confirmation • Lower timeframe execution • Liquidity and volume context This script does not repaint and is intended as an analytical tool, not as financial advice.
Indicatore Pine Script®
di EugenioTheDog
Sri - Keltner Channel Dual - CTF 📌 Sri – Keltner Channel Dual (Custom Timeframe) Overview Sri – Keltner Channel Dual (CTF without Toggle) is a dual-layer Keltner Channel overlay designed to visualize volatility structure across two independent higher or equal timeframes. Unlike traditional Keltner Channel indicators that operate on a single timeframe or require manual mode selection, this script always plots two Keltner Channels at the same time, each calculated on its own user-defined timeframe. This makes it especially useful for multi-timeframe confluence, trend validation, and volatility compression/expansion analysis. 🔹 Key Features 1️⃣ Dual Independent Keltner Channels Two fully independent Keltner Channels Each channel has its own timeframe, length, multiplier, source, and band style Both channels are always active (no toggles, no repainting logic) 2️⃣ True Multi-Timeframe Calculation Each channel is calculated using request.security() on its selected timeframe No approximation or scaling of lower-timeframe data Ensures true higher-timeframe structure on lower charts 3️⃣ Flexible Volatility Models Each Keltner Channel can independently use: Average True Range (ATR) True Range Raw Price Range (High – Low, smoothed) This allows traders to compare classic ATR-based channels vs pure price-range volatility on the same chart. 4️⃣ EMA or SMA Basis Control Each channel can independently switch between: Exponential Moving Average (EMA) Simple Moving Average (SMA) This makes the script adaptable to both fast-reacting trend traders and smoother swing-based analysis. 5️⃣ Visual Confluence Zones Upper bands and lower bands between Channel-1 and Channel-2 are filled The fill highlights: Volatility agreement Compression zones Expansion breakouts Helps quickly identify high-probability trend continuation or exhaustion areas 📈 How to Use the Indicator Common use cases: Trend Confirmation Price holding above both bases → bullish bias Price holding below both bases → bearish bias Volatility Compression When both channels narrow and overlap → potential breakout zone Multi-Timeframe Structure Use Channel-1 for execution timeframe Use Channel-2 for higher-timeframe context (e.g., 15m + 1H, or 1H + Daily) Dynamic Support & Resistance Upper and lower bands act as adaptive volatility-based levels ⚠️ Notes This is not a signal-based or buy/sell indicator Designed as a market structure and volatility framework Best used alongside price action, volume, or momentum tools 🔒 Why This Script Is Closed-Source While Keltner Channels are a known concept, this script focuses on a non-toggle, always-on dual timeframe architecture, combined with independent volatility modeling and visual confluence mapping, which is not provided as a single integrated tool in standard open-source implementations.
Indicatore Pine Script®
di venkat_27
Carpe Diem Trading Algo - CoreCarpe Diem Trading Algo - CORE is the central signal engine of the Carpe Diem suite, built to select, track, and score multiple entry methods inside one unified framework. It is designed for traders who want one clean BUY/SELL stream that adapts to the market regime instead of juggling separate indicators. ​ CORE is inspired by well‑known technical analysis ideas (trend vs range regimes, Z‑Score, Stoch, structure breaks, money flow, ATR‑based risk), but every component is implemented from scratch and then extended, so it is not a wrapper or clone of any public script. What you see on the chart is a custom architecture that combines these concepts into a single regime‑aware, multi‑engine signal and risk/EDGE system. ​ At the base layer, CORE uses a custom range/regime engine that classifies price into bullish, bearish, or neutral conditions using an ATR‑normalized oscillator around a regime moving average. It measures the distance between price and a configurable MA, normalizes that distance by ATR, smooths it, and then applies a dead zone and “avoid ranging / only ranging” options to define where the system is allowed to trade. All signal engines run through this regime layer, so the same method behaves differently in clean trends vs choppy ranges instead of firing blindly in all conditions. ​ On top of the regime filter, CORE offers eight interchangeable signal engines that all feed the same BUY/SELL plots, each using classic ideas in a bespoke way: ​ DER Color‑Match: builds bullish/bearish pressure from weighted positive and negative returns, then creates a separate spike line and requires color‑matched agreement between signal and spike to confirm entries; this is a custom directional returns model, not a port of any public “DER” or “delta” script. ​ Z‑Score: computes the Z‑score of price over a configurable lookback, smooths it and uses zero‑line crosses only when they align with the background regime; this is a tailored Z‑score implementation inside the CORE regime system, not a direct copy of any existing Z‑score indicator. ​ TPR (Trend–Pullback–Resume): detects trend extensions away from the regime MA, waits for a controlled pullback into ATR‑scaled proximity bands, then looks for a resume of momentum with strict timeouts for each phase; this three‑stage pattern is coded specifically for CORE and is not based on any one published script. ​ WTMF Blend: combines a WaveTrend‑style oscillator and a Money Flow measure into a single normalized blend with configurable weights and a “lock‑until‑opposite” behavior; the formulas and blending logic are customized, and CORE does not reuse a public WaveTrend or money‑flow script. ​ MSB Structure Break & Retest: tracks swing highs/lows, detects breaks using either closes or wicks, and optionally waits for an ATR‑scaled retest window with relaxed or strict modes; it is built specifically for this algo and is not a clone of any existing “MSB/CHOCH” script. ​ Stoch Regime: uses a centered, sensitivity‑controlled Stoch K/D pair that is only allowed to signal in alignment with the bullish/bearish background regime; this is a custom, regime‑aware Stoch implementation rather than a direct lift of any public Stoch strategy. ​ Spike Thresholds: computes ATR‑normalized deviation from a moving average, smooths it, and uses separate long/short thresholds to detect spikes that also agree with the regime filter; it is a bespoke spike engine, not a republish of classic “spike” indicators. ​ Trajectory Momentum: measures ATR‑normalized momentum between fast and slow EMAs plus EMA‑smoothed acceleration, with the option to “lock until opposite” so trends are not exited on every minor correction; this is a custom trajectory design, not a copy of a known open‑source trend tool. ​ In addition to the main engines, CORE includes proprietary extension/exhaustion markers that run in the background as context only. They use a custom half‑cycle calculation with a configurable half‑length and ATR‑based bands around a composite price (close/open/high/low/median/typical/weighted/average) to track where price is pressing into statistically extended zones. When enabled, these markers plot small X’s at potential extension highs/lows and can trigger optional alerts, giving you an exhaustion layer that is designed specifically for CORE’s regime logic rather than copied from any public “exhaustion” or “extension band” script. ​ CORE also includes a dedicated DER Spike Strength filter that is unique to this script. It measures both distance and slope between the DER signal and its spike line, builds adaptive baselines over a dynamic lookback, and then derives dynamic thresholds that can gate DER entries or even invalidate an existing DER state when strength fades. You can choose whether strength is only an entry qualifier or also a post‑entry filter. ​ To evaluate methods over time, CORE runs an internal EDGE tracker that converts trade outcomes into an R‑based score per method and per context. For each BUY or SELL trigger, the script simulates a position with ATR‑based TP and SL, tracks how price evolves over a fixed evaluation window, and assigns an outcome within a bounded R range, including penalties for unresolved trades or both TP and SL being touched in the same bar. Those outcomes feed exponential moving statistics and are mapped into a 0–100 EDGE value. The EDGE model itself is a completely proprietary scoring framework that was designed specifically for CORE. ​ The risk panel in the top‑right is a persistent table rather than a simple label. For every engine, it shows the last persistent state (BUY, SELL, or FLAT) according to that engine’s logic and the current regime, plus a compact EDGE number that represents the recent average R performance of that engine in context (trend vs. range, long vs. short). The panel uses this EDGE value to drive a traffic‑light color scheme for each engine’s main cell: high EDGE values are shown with a green background to indicate lower historical risk and better recent performance, low EDGE values are shown with a red background to indicate higher historical risk and weaker recent performance, and mid‑range EDGE values are shown in a more neutral tone between those extremes. Cells that are still warming up, or for engines that are not currently being computed, are displayed in a neutral gray so you can immediately distinguish between active, proven engines and inactive or unready rows. This lets you read the panel as “Which engine currently carries the most favorable risk profile here?” instead of only seeing raw signals, and you can use it to avoid running a method that is currently underperforming in this regime while rotating toward engines that have demonstrated stronger recent R outcomes. Optional alerts can fire when the selected engine’s risk state flips between favorable and unfavorable zones so you are notified when the underlying EDGE profile for your chosen method materially changes. ​ Because this is a vendor‑grade, invite‑only tool, CORE also includes an automatic profile system to help avoid overfitting without forcing you to retune everything manually. Timeframe‑aware defaults adjust core inputs such as range length, dead‑zone size, DER length, Z‑Score lookback, and adaptive strength parameters depending on your chart resolution, and those defaults are further modified by profile (Conservative, Balanced, or Aggressive) and asset preset (Crypto, FX, Indices, or Stocks). You can override any parameter, but the auto profile is designed to give you robust starting points that already respect volatility and instrument behavior. ​ Usage guidelines: Use the risk/EDGE panel as a live risk dashboard: focus on engines whose cells show strong green tones with higher EDGE numbers when you want to lean into the current regime, and treat red or gray cells with low EDGE as higher‑risk engines to deprioritize until their recent performance improves.​ Choose a signal engine that matches your style (for example, DER or Trajectory for momentum, TPR or MSB for swing structure, or Stoch or Z‑Score for regime‑aware mean reversion). ​ Keep the range/regime and dead‑zone filters enabled if you want fewer but higher‑quality signals that avoid sideways noise. ​ Optionally enable extension/exhaustion markers as a context layer to highlight areas where price is statistically stretched, then combine that information with the main BUY/SELL engine (for example, taking TPR or Trajectory signals that align with exhaustion at the edge of a regime zone). By default, signals are confirmed at bar close to avoid intrabar repaint of entries; you can still enable debug or extra plots for research, but the standard template is the clean BUY/SELL output with the risk/EDGE panel and, optionally, the extension markers. ​Final points — The source code is invite‑only because the combination of the regime engine, DER + adaptive strength framework, multi‑engine signal routing, proprietary extension/exhaustion context, and the fully proprietary R‑based EDGE and risk panel is original to the Carpe Diem suite. While CORE uses well‑known concepts, the way they are integrated and extended in this script is proprietary and not a reproduction of any specific open‑source indicator or strategy
Indicatore Pine Script®
di CARPE_DIEM_TRADING
COT: CTA POSITIONINGCOT: CTA POSITIONING A comprehensive Commitment of Traders (COT) indicator that tracks institutional money manager positioning across futures markets. This indicator displays CTA (Commodity Trading Advisor) net positioning as a percentile rank, helping traders identify potential market extremes and contrarian opportunities. Key Features: Multi-Market Coverage: Automatically detects and displays COT data for 60+ futures contracts across equity indices, bonds, currencies, cryptocurrencies, metals, energy, grains, livestock, and softs Percentile Rank Display: Shows CTA net positioning (long minus short) as a percentile over a customizable lookback period (default 156 weeks ≈ 3 years) Extreme Zones: Visual highlighting of potential reversal zones when CTAs reach positioning extremes (>80th percentile = bearish, <20th percentile = bullish) Liquidity Analysis Table (optional): Displays detailed positioning breakdown including: Gross long and short positions Net positioning 20-day average volume Net position as % of average daily volume Estimated days to unwind net position Methodology: The indicator pulls CFTC Commitment of Traders data from both Financial Traders (COT3) and Disaggregated (COT2) reports, focusing specifically on leveraged money managers (CTAs/hedge funds). It calculates: Net Positioning = CTA Longs - CTA Shorts Net as % of Open Interest Percentile rank of current net positioning vs. lookback period Interpretation: High readings (>80): CTAs are extremely net long - potential bearish reversal signal Low readings (<20): CTAs are extremely net short - potential bullish reversal signal Works best as a contrarian indicator on weekly timeframes Consider liquidity metrics to assess position size relative to market capacity Settings: Lookback Period: Adjustable percentile calculation window (default 156 periods) Show Table: Toggle detailed positioning and liquidity data display Supported Markets: Equity Indices (ES, NQ, RTY, YM), Treasuries (ZT, ZF, ZN, ZB, UB), Currencies (6E, 6J, 6B, 6C, 6A), Crypto (BTC, ETH), Metals (GC, SI, HG, PL, PA), Energy (CL, NG, RB, HO, BZ), Grains (ZC, ZW, ZS, ZM, ZL), Livestock (LE, HE, GF), and Softs (SB, CT, KC, CC, OJ) Note: COT data is released weekly on Fridays and reflects positions as of Tuesday close. This indicator works best on daily or weekly timeframes. Data sourced from CFTC Commitment of Traders reports via TradingView's COT library.
Indicatore Pine Script®
di chosin76
Time Pattern Analyzer - Multi Mode [fmb]This is a lightweight session-behaviour overlay that helps you spot whether a market tends to move up or down at specific days or times. - Two analysis modes Weekday: Breaks performance down by Mon–Fri Hour of Day: Breaks performance down by 0–23 and can also track a single exact time (hour + minute), like 09:30 - Visual timing markers (optional) Draws vertical lines on the chart for the selected day(s) or time(s) Line colour reflects the bar direction: green (up), red (down), grey (neutral) Fully adjustable width and style (solid, dotted, dashed) - Flexible “green vs red” definition Body mode: Close > Open (candle body direction) Previous close mode: Close > Close (momentum vs prior bar) - Stats table (optional) For each day or hour, the table shows: Count (sample size) % Green % Red Average % move (average return for that bucket) Table can be positioned anywhere on the chart (top/bottom, left/centre/right) Use cases - Quickly identify recurring tendencies like “Mondays are strongest” or “first hour is choppy,” and validate timing ideas with clear counts and averages instead of guesswork. Note: This tool reports historical tendencies, not predictions. Always account for regime changes, news risk, and liquidity.
Indicatore Pine Script®
di Fullymobile
Janus Atlas - Multi-Timeframe Auto-LevelsJanus Atlas: Multi-Timeframe Auto-Levels Janus Atlas transforms scattered price reference points into a unified level-mapping system. The indicator is designed to help traders identify potential support and resistance zones through 15 integrated analytical layers: Higher-Timeframe Levels, Session Ranges, Opening Range, Killzones, Gap Levels, CME Gaps, VWAP Suite, Volume Profile, Previous Period Levels, Fibonacci Retracements, Confluence Zones with Strength Scoring, Market Structure, Fair Value Gaps, and a real-time Distance Table with Hidden Confluence Discovery. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗢𝗩𝗘𝗥𝗩𝗜𝗘𝗪 Price levels are not random. They represent points where market participants previously made decisions. Traders have long tracked daily highs, weekly opens, VWAP, and other reference points to anticipate where price may find support or resistance. Janus Atlas builds on this foundation by consolidating multiple level types into a single, organized overlay: • HTF Levels : Daily, Weekly, Monthly, Quarterly, and Yearly Opens/Highs/Lows/Midpoints provide macro context for intraday decisions. • Session & Custom Ranges : Asian, European, and North American session highs/lows, plus two fully customizable session windows. • Institutional References : Opening Range, VWAP with standard deviation bands, Volume Profile (POC/VAH/VAL), and naked POC tracking. • CME Gap Tracking : Weekend gaps from CME futures markets, with automatic fill detection and multi-asset support. • Previous Period Levels : Yesterday's high/low, last week's range, and prior VWAP values serve as potential memory points for price. • Technical Overlays : Fibonacci retracements, Fair Value Gaps, Market Structure (BOS/CHoCH), and automatic Confluence Zone detection. • Distance Table : Real-time distance to nearest levels above and below current price. Rather than running multiple indicators, Janus Atlas provides a single comprehensive view with smart label management that prevents chart clutter. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗛𝗢𝗪 𝗜𝗧 𝗪𝗢𝗥𝗞𝗦 The indicator operates on one core principle: levels where price previously reacted may warrant attention when revisited, though past reactions do not guarantee future behavior. Higher-Timeframe Levels (HTF) What it does: Tracks the Open, High, Low, and Midpoint of the current Day, Week, Month, Quarter, and Year. Monday's range is tracked separately as it often sets the tone for the trading week. All calculations use confirmed bar data with no repainting. How to interpret it: HTF levels provide context for where price sits within larger structures. A move toward the weekly high while already extended from the monthly midpoint may suggest different conditions than the same move occurring near the monthly low. These levels do not predict direction but help frame the current market position. Session Levels What it does: Calculates the Open, High, Low, and Midpoint for three preset sessions (Asian, European, North American) plus two fully customizable session windows. All times respect your selected timezone. How to interpret it: Session ranges often contain price during their active hours. When price breaks and holds beyond a session range during a subsequent session, this may indicate directional interest, though false breakouts are common and should be considered. Opening Range (OR) What it does: Captures the high and low established during a configurable window at market open (default: first 30 minutes). The range is calculated once the window closes and remains fixed for the trading day. How to interpret it: The Opening Range represents early price discovery. Some traders watch for price to break and hold beyond OR boundaries as a potential indication of intraday direction. OR levels may also act as support/resistance when revisited. Killzones What it does: Displays background shading for five high-volume trading windows: Asian (20:00-00:00), London Open (02:00-05:00), NY Open (08:30-11:00), London Close (10:00-12:00), and NY PM (13:00-16:00). All times are configurable. How to interpret it: Killzones highlight periods of historically elevated volatility and liquidity. Price moves during these windows may carry more significance than moves during quieter periods, though this is not guaranteed. Gap Levels What it does: Identifies the gap between the previous session's close and the current session's open for both daily and weekly timeframes. Gap levels are drawn and can trigger alerts when touched. How to interpret it: Gaps represent price inefficiencies that may attract price back toward them. This concept is sometimes called "gap fill." However, many gaps remain unfilled for extended periods, so gap levels should be viewed as areas of potential interest rather than guaranteed targets. CME Gaps What it does: Tracks weekend price gaps from CME futures markets. CME closes Friday at 4pm CT and reopens Sunday at 5pm CT. The indicator compares each week's opening price against the previous week's closing price to identify gaps. Auto-detects the correct CME symbol based on your chart, supporting Bitcoin (BTC1!), Ethereum (ETH1!), S&P 500 (ES1!), Nasdaq (NQ1!), Gold (GC1!), Oil (CL1!), and more. How to interpret it: CME gaps are widely watched by institutional traders as price magnets. The gap zone represents a price inefficiency that often gets "filled" when price returns to that level. Gap-up zones may act as support while gap-down zones may act as resistance. Gaps auto-remove from the chart once price completely fills them. Not all gaps fill quickly; some remain open for weeks or months. VWAP Suite What it does: Calculates Volume-Weighted Average Price for Daily, Weekly, Monthly, Quarterly, and Yearly anchors. Optional standard deviation bands (±1σ, ±2σ) and previous period VWAP values are also available. How to interpret it: VWAP represents the average price weighted by volume, a benchmark used by institutional traders. Price above VWAP may suggest bullish conditions while price below may suggest bearish conditions, though VWAP alone does not determine trend. The bands indicate statistical extensions from the mean. Volume Profile What it does: Displays the Point of Control (POC), Value Area High (VAH), and Value Area Low (VAL) for configurable daily and weekly periods. Naked POC tracking identifies prior POC levels that price has not revisited. How to interpret it: The POC represents the price with the most traded volume, a potential equilibrium point. VAH and VAL bound the area containing 70% of volume. Price may find support or resistance at these levels, particularly naked POCs that have not been "filled." Previous Period Levels What it does: Draws the prior period's Open, High, Low, and Midpoint for Day, Week, Month, Quarter, and Year. These are fixed historical values that update only when a new period begins. How to interpret it: Previous period levels represent established reference points that many traders monitor. Yesterday's high or last week's low may act as support/resistance when retested, as these levels often coincide with stop placements and pending orders. Fibonacci Levels What it does: Provides two independent Fibonacci retracement sets with 20 different anchor options (session highs/lows, HTF extremes, OR boundaries). Standard levels (0.236, 0.382, 0.5, 0.618, 0.786, 0.886) plus extensions (1.272, 1.618) are available. How to interpret it: Fibonacci retracements identify potential support/resistance based on mathematical ratios. The 0.618 and 0.786 levels are commonly watched for pullback entries, while extensions project potential targets. Effectiveness varies by market conditions. Confluence Zones What it does: Automatically detects when multiple levels converge at the same price and displays confluence strength directly on the combined labels. When two or more levels cluster together, the label shows a strength indicator like (×2), (×3), or (×4). An optional shaded zone box can also be enabled. How to interpret it: Higher confluence counts suggest stronger potential support or resistance. A level showing (×3) means three independent analytical methods identified the same price zone. While this may increase the probability of price reaction, confluence alone does not guarantee support or resistance. Single levels may be less significant than high-confluence zones. Hidden Confluence Discovery What it does: The Distance Table can reveal confluence you're missing. When "Show Hidden Confluence" is enabled, the table shows disabled levels that would add confluence to your active levels. For example, seeing "+0.618 (Fib)" next to a level means enabling Fibonacci would create additional confluence at that price. How to interpret it: This feature helps discover high-confluence zones without needing to enable every system. Orange-highlighted rows indicate potential confluence exists from systems you haven't enabled. Consider enabling those systems to see the full picture. Market Structure What it does: Identifies swing highs and lows using pivot detection, then labels them as HH (Higher High), HL (Higher Low), LH (Lower High), or LL (Lower Low) based on comparison to the previous swing. Break of Structure (BOS) and Change of Character (CHoCH) events are marked when price breaks through a labeled swing level. How to interpret it: HH/HL sequences suggest uptrend. LH/LL sequences suggest downtrend. BOS indicates trend continuation while CHoCH may signal potential trend reversal. The first swing point is tracked silently as a reference, with labeling beginning on subsequent swings. These labels help visualize market structure but should not be followed blindly. False breaks are common. Fair Value Gaps (FVG) What it does: Detects price imbalances where a candle's range does not overlap with the candle two bars prior. Bullish FVGs (gaps up) and Bearish FVGs (gaps down) are drawn as boxes. Mitigation tracking shows when price returns to fill these gaps. How to interpret it: FVGs represent inefficient price delivery that may attract price back for "rebalancing." Unmitigated FVGs may act as support/resistance zones, though not all gaps get filled. Distance Table What it does: Displays a real-time table split into ▲ RESISTANCE (levels above price) and ▼ SUPPORT (levels below price) sections. Each row shows the level name, distance (in ticks, percentage, or price), strength rating (★), and hidden confluence discovery (+). Three layout options: Vertical (stacked full columns), Horizontal (side-by-side columns), and Compact (single column). How to interpret it: The split design provides instant identification of support vs resistance zones. The Strength column shows TOTAL confluence (both enabled AND hidden levels combined), so ★★★★ means four levels converge at that price regardless of what you have enabled. The + column (orange) reveals exactly which disabled systems would add to that confluence. This shows you the TRUE strength of each zone and what to enable to see the full picture on your chart. In this way, the table serves as a learning tool: it teaches you about confluence on your chart that you may not have discovered yet, helping you understand which systems to explore further. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗪𝗛𝗬 𝗧𝗛𝗘𝗦𝗘 𝗖𝗢𝗠𝗣𝗢𝗡𝗘𝗡𝗧𝗦 𝗪𝗢𝗥𝗞 𝗧𝗢𝗚𝗘𝗧𝗛𝗘𝗥 Each level type captures a different aspect of market structure: 1. Time-Based Levels (HTF, Sessions, OR): Anchor price to calendar-driven reference points that reset on predictable schedules. 2. Volume-Based Levels (VWAP, Volume Profile): Identify where actual trading activity concentrated, revealing institutional positioning. 3. Historical Levels (Previous Periods, Naked POC, CME Gaps): Mark where price previously found significance, creating potential "memory" points. 4. Technical Levels (Fibonacci, FVG, Market Structure): Apply mathematical and structural analysis to identify potential reaction zones. 5. Synthesis (Confluence Zones, Distance Table): Combine multiple inputs to highlight high-priority areas and provide real-time context. When multiple factors align (for example, the weekly VWAP coinciding with yesterday's high near a 0.618 Fibonacci level), this represents confluence that may warrant additional analysis. Such conditions do not guarantee any particular outcome but may help prioritize attention. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗛𝗢𝗪 𝗧𝗢 𝗨𝗦𝗘 This section provides step-by-step guidance for interpreting the indicator's visual elements and incorporating them into analysis. Step 1: Enable Relevant Systems Begin by selecting which level types match your trading approach. The Controls section provides master toggles for all 15 systems. For intraday trading, you might enable HTF Levels, VWAP, Previous Periods, and Opening Range. For swing trading, HTF Levels, Volume Profile, and Fibonacci may be more relevant. Start with fewer systems enabled and add more as you become familiar with each. Enabling all systems simultaneously can create visual clutter despite the smart label management. Step 2: Identify the Current Context Before analyzing specific levels, establish where price sits within the broader structure: • Is price above or below the daily VWAP? • Is price in the upper or lower half of the weekly range? • Has price broken beyond yesterday's high or low? This context helps interpret whether individual level touches represent potential support, resistance, or continuation. Step 3: Watch for Level Approaches As price approaches a level, observe the behavior: • Does price slow down and consolidate near the level? • Does price pierce through quickly then reverse? • Does price break through with momentum and hold? These observations provide clues about the level's significance, though no single pattern guarantees a particular outcome. Step 4: Note Confluence Areas Enable Confluence Zones to automatically highlight areas where multiple levels cluster. When approaching a confluence zone: • Multiple independent analytical methods agree on the area's significance • The label shows strength: (×2), (×3), (×4) indicate how many levels converge • Higher confluence counts may represent higher-probability reaction points • However, strong momentum can push through even strong confluence Example Scenario A: Support Confluence BTC down 2.3% from the open. A combined label shows "pdL · wVWAP · 0.618 (×3)" at 94,200 (yesterday's low, weekly VWAP, and a Fib level converging). The (×3) indicates three independent methods agree on this zone. Distance Table shows ★★★ for this level. Price reaches the zone, wicks through by $50, prints a hammer. High-confluence zones often attract reactions. Example Scenario B: Hidden Confluence Discovery ES approaching a level labeled "wH ★★" in the Distance Table. You notice "+0.618 (Fib)" in orange next to it. This means enabling Fibonacci would reveal a third level at this price. You enable Fibs and now see "wH · 0.618 (×3) ★★★" - confluence you didn't know existed. Example Scenario C: Breakout Setup NY Open killzone active (purple shading). Price consolidates between Opening Range levels (orH at 4,520, orL at 4,508) for 20 minutes. A candle breaks above orH while also clearing the Asian session high (asH). Two levels broken together during a high-volume window. Clustered breakouts during active sessions may indicate directional interest, though false breaks remain common. Example Scenario D: Trend Continuation ES trending higher for three sessions. Price pulls back to dVWAP, touches it, bounces. This pattern repeats twice more over the day. Each dip to VWAP finds buyers. No bearish signals present: price remains above all daily levels, no divergence with higher timeframes. VWAP acting as dynamic support during established trends often indicates institutional accumulation on pullbacks. Step 5: Use the Distance Table Position the Distance Table in a corner that doesn't obstruct price action. Use it to: • Quickly identify the nearest level above and below • See confluence strength (★★★ = high priority, ★ = lower priority) • Discover hidden confluence: orange text shows what you're missing (e.g., "+0.618 (Fib)") • Plan potential target areas for existing positions The table scans 45+ levels across all systems. Even disabled systems are checked so you can discover confluence opportunities you didn't know existed. For mobile trading, use Compact layout with Tiny text size and Bottom Center position. Step 6: Set Relevant Alerts With 52 alert conditions available, focus on the levels most relevant to your trading: • Previous Day High/Low touches for day trading • Weekly VWAP touches for swing positioning • Opening Range breakouts for momentum plays • CME Gap fills for magnet-level targets Alerts fire on confirmed bar close only, preventing false triggers from wicks. Step 7: Adjust Visual Settings Customize the appearance to match your preferences: • Line Dim % reduces line brightness relative to labels • Extend Lines Right can be disabled for cleaner charts • Label Combine % controls when nearby labels merge • Label Style switches between Box and Text Only modes ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗡𝗔𝗩𝗜𝗚𝗔𝗧𝗜𝗡𝗚 𝗗𝗜𝗙𝗙𝗘𝗥𝗘𝗡𝗧 𝗠𝗔𝗥𝗞𝗘𝗧 𝗖𝗢𝗡𝗗𝗜𝗧𝗜𝗢𝗡𝗦 Trending Markets In strong uptrends, price often holds above dVWAP for extended periods. Pullbacks to VWAP frequently find support as institutions accumulate at fair value. Levels below price (pdL, wL) become less relevant while levels ahead gain importance. Focus shifts to resistance references in the direction of the move. Ranging Markets During consolidation, price oscillates between previous period highs and lows. The Volume Profile POC often acts as an equilibrium point, with price returning to it repeatedly. Market Structure may show alternating BOS labels in both directions without clear CHoCH. Opening Range boundaries frequently contain price on range-bound days. Confluence zones near range extremes may produce stronger reactions than mid-range levels. High Volatility Events During major news events, price may break through multiple levels rapidly. VWAP bands help gauge statistical extension: price at d+2σ or d-2σ represents 2 standard deviations from mean, an uncommon reading. Levels created during volatile sessions (gaps, new swing points) often become significant references once volatility subsides. Killzone shading helps identify whether moves occur during expected high-activity windows or quiet periods. Weekend Gap Scenarios CME gaps created over the weekend often act as price magnets during the following week. A gap-up zone (where Sunday's open was higher than Friday's close) may provide support if price pulls back to that level. Unfilled CME gaps from weeks or months prior can suddenly become relevant when price returns to those zones. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗧𝗘𝗖𝗛𝗡𝗜𝗖𝗔𝗟 𝗗𝗘𝗧𝗔𝗜𝗟𝗦 • HTF data retrieved using request.security() with lookahead disabled for non-repainting behavior • VWAP calculated using cumulative (price × volume) / cumulative volume methodology • Volume Profile uses configurable lookback periods with session-based anchoring • Market Structure pivot detection uses left/right bar confirmation with configurable sensitivity • FVG detection requires complete non-overlap between current candle and two bars prior • Confluence zones calculated by scanning all active levels within threshold percentage • Hidden confluence discovery scans 45+ potential levels from all systems regardless of enable state • CME gaps retrieved via weekly request.security() calls comparing week open vs previous week close • All signals fire on bar close only. Historical display matches live behavior. • Smart label combining merges labels within configurable price threshold ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗨𝗡𝗜𝗤𝗨𝗘 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦 • Hidden Confluence Discovery : The Distance Table reveals confluence you're missing. Stars show TOTAL strength (enabled + hidden combined), and orange text shows exactly which disabled levels would add to that confluence. Scans 45+ levels across all systems to show you the TRUE strength of each zone. • Split Support/Resistance Table : Distance Table separates levels into ▲ RESISTANCE (above price) and ▼ SUPPORT (below price) sections for instant directional identification. Three layouts: Vertical (full columns), Horizontal (side-by-side), and Compact (single column). • Confluence Strength Scoring : Combined labels show (×2), (×3), (×4) indicating how many independent systems agree on a level. Stars reflect total confluence including hidden levels. • 15 Integrated Systems : Comprehensive level mapping without indicator stacking • Smart Label Management : Nearby labels automatically combine to prevent clutter (e.g., "dH · wH · mH" when highs align) • CME Gap Tracking : Weekend gaps with auto-detection for 22+ futures symbols • Flexible Timezones : All session times configurable with six timezone options including Exchange time • Dual Fibonacci Sets : Two independent retracement systems with 20 anchor options each • Naked POC Tracking : Historical POC levels that price has not revisited • Non-Repainting Architecture : All calculations use confirmed bar data only; historical display matches live behavior ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 𝗢𝗩𝗘𝗥𝗩𝗜𝗘𝗪 • Controls : Master toggles for all 15 level systems • Appearance : Label style, size, spacing, line width, dimming, timezone selection • HTF Levels : Daily/Weekly/Monthly/Quarterly/Yearly Open/High/Low/Mid toggles • Session Levels : Asian/European/NA session times and display options • Custom Sessions : Two user-defined session windows with custom names • Opening Range : Duration and display settings • Killzones : Five preset killzone windows with individual toggles • Gap Levels : Daily and weekly gap display options • CME Gaps : Auto-detect toggle, manual symbol selection, display style, max gaps, colors • VWAP Levels : Multi-timeframe VWAP with band settings and previous values • Volume Profile : POC/VAH/VAL display with naked POC tracking • Previous Periods : Prior period level toggles across all timeframes • Fibonacci Levels : Dual retracement sets with anchor and level selection • Confluence Zones : Strength display toggle, optional zone box, proximity settings (Ticks/Price/%), minimum levels • Market Structure : Pivot sensitivity, label display, connection lines • Fair Value Gaps : Lookback, mitigation tracking, display options • Distance Table : Position, layout (Vertical/Horizontal), size, units, level limit, strength column (★), and hidden confluence discovery • Alerts : 52 selectable alert conditions ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗔𝗟𝗘𝗥𝗧𝗦 Janus Atlas provides 52 alert conditions organized into Individual Alerts and Grouped Alerts. Individual Alerts fire for specific high-priority levels: • Previous Day: pdO, pdH, pdL • Daily: dO, dH, dL • Weekly: wO, wH, wL • Monday: moO, moH, moL • Opening Range: orH, orL • VWAP: dVWAP, wVWAP, pdVWAP • Volume Profile: dPOC, dVAH, dVAL, wPOC, wVAH, wVAL • Gap: gapH, gapL, Gap Filled • CME Gap: CME Gap New, CME Gap Filled • Market Structure: CHoCH Bullish, CHoCH Bearish, BOS Bullish, BOS Bearish • FVG: Bullish FVG, Bearish FVG • Naked POC: dnPOC, wnPOC • Other: Fib Level Touched, Confluence Zone Grouped Alerts cover multiple related levels efficiently: • Monthly (mO, mH, mL) • Quarterly (qO, qH, qL) • Yearly (yO, yH, yL) • Sessions (Asia/Euro/NY O/H/L) • Custom Sessions (CS1/CS2 H/L) • Previous Week/Month/Quarter/Year • HTF VWAP (mVWAP, qVWAP, yVWAP) • Previous VWAP (pwVWAP, pmVWAP, pqVWAP, pyVWAP) • Monthly/Quarterly/Yearly Volume Profile ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗟𝗜𝗠𝗜𝗧𝗔𝗧𝗜𝗢𝗡𝗦 • Levels indicate areas of potential interest, not guaranteed support or resistance • Past level reactions do not predict future behavior • Strong momentum can push through even high-confluence zones • CME gap data requires a supported chart symbol (auto-detect handles most cases) • Enabling too many systems simultaneously may create visual clutter • Volume Profile accuracy depends on available volume data from exchange ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗖𝗢𝗡𝗖𝗟𝗨𝗦𝗜𝗢𝗡 Janus Atlas consolidates 15 distinct level systems into a unified overlay, providing comprehensive price structure analysis without indicator stacking. From time-based references (HTF, sessions) to volume-based levels (VWAP, POC) to technical overlays (Fibonacci, FVG, Market Structure, CME Gaps), the indicator maps potential areas of interest across multiple analytical frameworks. The smart label management, automatic confluence detection, and real-time distance table help traders quickly identify high-priority zones while maintaining chart clarity. Whether used for intraday scalping or swing trading, Janus Atlas provides the structural context to frame trading decisions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔶 𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥 Trading is risky and most traders lose money. This indicator is provided for informational and educational purposes only. It does not constitute financial advice, and past performance does not guarantee future results. All content, tools, and analysis should not be considered as recommendations to buy or sell any asset. Users are solely responsible for their own trading decisions. Always use proper risk management and consider consulting a qualified financial advisor before making trading decisions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ For access and support, please send a private message.
Indicatore Pine Script®
di SignalPilotLabs
HTF SMT in LTF [Tradeisto]Version 1.0.0 This marks the first official release of the HTF SMT in LTF indicator. This tool has been engineered to provide high-precision Smart Money Technique (SMT) divergence detection across multiple timeframes with a focus on real-time accuracy and visual clarity. Primary Features Time-Sync Execution: The indicator utilizes a master-clock architecture to synchronize secondary ticker price data with the exact timestamp of main ticker pivots. This ensures that divergences are calculated based on identical moments in time, eliminating the false signals common in standard SMT scripts. 8-Slot Multi-Timeframe Support: Integrated monitoring for the current chart timeframe plus 7 additional higher timeframe (HTF) slots. Each slot is independently toggleable and customizable. Anticipatory SMT Discovery: Implemented a live detection layer that plots dotted lines as soon as a potential divergence forms. This allows for tactical anticipation of market turns before a pivot is mathematically confirmed. Real-Time Invalidation: Live anticipatory lines are monitored continuously and will automatically be removed if price action breaks the divergence criteria before the candle close. Higher Timeframe Priority: Built-in overlap prevention automatically filters redundant signals. When multiple timeframes trigger at the same price level, the higher timeframe is given visual priority to maintain chart cleanliness. Wick-to-Wick Alignment: Advanced time-mapping ensures that higher timeframe SMT lines are drawn with absolute precision across the high and low wicks of lower timeframe charts. Pre-Configured Defaults 90-Minute Focus: HTF Slot 7 is enabled by default and pre-set to the 90-minute timeframe for specialized intraday analysis. Optimized UI: The indicator header remains uncluttered by omitting the shorttitle parameter. Technical Implementation Custom Type Architecture: The script uses advanced Pine Script v5 types for efficient state management and data storage. Dynamic Requests: Optimized for performance using TradingView's dynamic request engine to handle multiple ticker inputs simultaneously. Timestamp Uniqueness: Pivot identification is handled via Unix timestamps to correctly differentiate and process Double Tops and Double Bottoms.
Indicatore Pine Script®
di swordNshield
ADO Sessions - New York, London, AsiaOverview ADO Sessions is a clean and flexible session visualization indicator for TradingView. It highlights the three major trading sessions — New York, London, and Asia — directly on the chart using vertical session boundaries, optional background shading, and clear session labels. The indicator is designed to help traders quickly understand when liquidity, volatility, and session-specific behavior occur, without cluttering the chart. Key Features • Separate sessions for New York, London, and Asia • Vertical start and end lines for each session • Session name displayed directly on the chart • Three background modes per session: Off – no background shading Price Only – background limited to the session price range Everywhere – background across the full chart height • Fully customizable colors and transparency • Works on all intraday timeframes How It Works Each session is defined by a time range and operates independently. When a session starts, a vertical line marks the beginning When it ends, a second vertical line marks the close The session name is displayed at the top-left of the session Background behavior depends on the selected mode: Off → only lines and label are shown Price Only → background follows the session’s high and low Everywhere → background fills the entire chart vertically Best Use Cases • Intraday trading • Session-based strategies • Liquidity and volatility analysis • Crypto, Forex, Indices, and Futures Notes This indicator does not provide trading signals. It is a visual tool intended to support discretionary trading and session awareness.
Indicatore Pine Script®
di psychotrader123
ADO - EMA 21, 50, 200 + VWAP (Custom Labels & Offsets)b]Overview ADO – EMA 21, 50, 200 + VWAP is a clean and practical overlay indicator designed for intraday and swing traders. It combines multiple customizable EMAs with a VWAP, including clear on-chart labels with adjustable offsets, to keep your chart readable and focused on structure, trend, and mean value. The script is built for traders who want clarity without clutter and full control over what is displayed. What This Indicator Shows • Up to 5 Exponential Moving Averages (EMAs) • A Volume Weighted Average Price (VWAP) • Optional price labels for each EMA and VWAP • Fully customizable colors, line widths, and label offsets How It Works EMAs EMA 21 → Short-term momentum EMA 50 → Intraday trend direction EMA 200 → Higher-timeframe bias / market structure EMA 9 & EMA 100 → Optional fine-tuning EMAs Each EMA can be: Enabled or disabled Styled individually (color & line width) Labeled directly on the chart with a configurable bar offset VWAP Calculated using TradingView’s standard VWAP logic Based on intraday volume (session VWAP) Can be shown or hidden Includes an optional price label with offset How to Use Add the indicator to your chart Open the Settings panel Enable or disable individual EMAs and VWAP Adjust: EMA lengths Colors and line thickness Label visibility Label offset (default: +15 bars to the right) Best Use Cases • Intraday trading (crypto, forex, indices) • Trend identification and pullback entries • Mean reversion and VWAP reactions • Clean multi-EMA structure without indicator clutter Designed For Traders who value: Simplicity Readability Fast visual decision-making Notes This indicator does not generate trade signals. It is intended as a visual framework to support discretionary trading decisions.
Indicatore Pine Script®
di psychotrader123
TDL: Trade Execution Suite════════════════════════════════════════════════════════ TDL: Trade Execution Suite Bar-by-Bar Entry Signals with Broadening Formation Analysis ════════════════════════════════════════════════════════ A trade execution companion implementing bar-by-bar price action analysis with broadening formation detection for precise entry signals, dynamic stop/target management, and real-time trade style classification. Designed to work alongside the TDL Formation Scanner , this indicator provides execution-level detail for individual symbols with visual formation boundaries, trigger lines, HTF bar labels, and comprehensive trade management. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔑 KEY FEATURES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Bar-type-compliant signal direction (respects directional rules) Broadening formation detection with 7 pattern types Trade style classification (Mean Reversion vs Momentum) Dynamic stop/target calculation based on trade style Visual formation boundaries with edge zone shading HTF bar labels (1, 1-1, 2U, 2D, 3) on chart Real-time trigger monitoring with distance indicators Comprehensive dashboard with all trade parameters Signal cooldown and label limits to prevent overtrading 8 alert conditions for automated notifications ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📚 BAR TYPE CLASSIFICATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Every bar is classified by its relationship to the prior bar: ★1-1 (Inside of Inside) — Coiling energy, highest potential ★1 (Inside) — Range contraction, either direction possible 2U (2-Up) — Broke prior high, held low → LONG ONLY 2D (2-Down) — Broke prior low, held high → SHORT ONLY 3 (Outside) — Broke both → Use close position for direction Critical Rule: This indicator respects directional rules: 2U bars can ONLY trigger long entries 2D bars can ONLY trigger short entries Inside bars wait for trigger direction Outside bars use close location for bias ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏷️ HTF BAR LABELS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Visual labels showing bar types on higher timeframe candles: Label Colors: 🟡 Gold = Inside bars (1, 1-1) 🟢 Green = 2-Up (bullish, broke high) 🔴 Red = 2-Down (bearish, broke low) 🟠 Orange = Outside bar (3) Settings: Number of bars to label (1-10) Label size (tiny, small, normal) Position (above or below candles) Quickly see the bar sequence without switching timeframes! ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 BROADENING FORMATION DETECTION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Detects 7 types of expanding range patterns: MF (Megaphone) — Higher highs + Lower lows → Neutral bias ABW (Asc Broadening Wedge) — Both rising, highs steeper → Bear bias DBW (Desc Broadening Wedge) — Both falling, lows steeper → Bull bias BWB (Broadening Wedge Bottom) — Highs rising faster → Bull bias BWT (Broadening Wedge Top) — Lows falling faster → Bear bias ARA (Asc Right-Angle) — Flat highs + Rising lows → Bull bias DRA (Desc Right-Angle) — Falling highs + Flat lows → Bear bias Edge Detection: UPPER = Within threshold of upper boundary (favors short/fade) LOWER = Within threshold of lower boundary (favors long/fade) MID = Middle zone (wait for edge approach) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔄 TRADE STYLE CLASSIFICATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ↩ MEAN REVERSION Fade the edges — buy at lower boundary, sell at upper boundary. (Go) = Signal matches edge + Formation bias aligned (Caution) = Signal matches edge but against formation bias Stops: Outside formation boundary Targets: Opposite boundary 🚀 MOMENTUM Follow the breakout/breakdown through the edge. (Breakout) = Long signal at upper edge (Breakdown) = Short signal at lower edge (+) suffix = Formation bias supports direction Stops: Midpoint of formation (tighter) Targets: Beyond opposite boundary ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⭐ CONFLUENCE GUIDE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MEAN REVERSION SETUPS: Strong = Edge + Reversal Pattern + Bias Aligned Good = Edge + Pattern OR Edge + Bias Moderate = Edge with some factors opposed Low = Edge only, minimal confluence MOMENTUM SETUPS: Moderate = Breakout/Breakdown with bias aligned Low = Breakout/Breakdown with neutral bias Weak = Breakout/Breakdown against formation bias ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 TRIGGER SYSTEM ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Trigger Levels: LONG trigger = Prior bar high + buffer SHORT trigger = Prior bar low - buffer Buffer = configurable % of ATR (prevents false triggers) Signal Status: 🟢 LONG = Price crossed above long trigger 🔴 SHORT = Price crossed below short trigger 🟡 RDY↑/RDY↓ = Price approaching trigger (within threshold) ⚪ WAIT = Price far from triggers Freshness Classification: FRESH = <15% ATR past trigger (best entries) RUN = 15-40% ATR past trigger (still valid) EXT = >40% ATR past trigger (extended, can hide) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 SCORING SYSTEM ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Each signal receives a weighted score (0-100): Setup Quality (35%) 1-1 Inside = 100% | Inside = 85% | 2-bar = 60% | Outside = 30% Trigger Timing (35%) Fresh = 100% | Ready = 80% | Running = 50% | Extended = 30% Trend Alignment (30%) With trend (EMA 20>50 for longs) = 90% Against trend = 30% Grades: A+ (85+) | A (75+) | B+ (65+) | B (55+) | C (<55) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎨 VISUAL ELEMENTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Formation Lines: Red solid line = Upper boundary Green solid line = Lower boundary Gray dotted line = Midpoint Dashed lines = Edge zone boundaries Shaded boxes = Edge zones (optional) Trigger Lines: Green line = Long trigger level Red line = Short trigger level Gray = Trigger not available (bar type restriction) Trade Management: Dotted red line = Stop level Dotted green line = Target level HTF Bar Labels: Gold labels = Inside bars (1, 1-1) Green labels = 2U bars Red labels = 2D bars Orange labels = Outside bars (3) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📋 DASHBOARD ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ The dashboard displays: Bar Type — Current classification with direction Score — Quality score with grade Signal — Current trigger status Formation — Detected pattern with bias Bounds — Upper/lower boundary levels Location — Position within formation Style — Trade style classification ACTION — Recommended action Trend — EMA trend direction Position — Active trade status Stop/Target — Current trade levels Filters — Active style filters ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ KEY SETTINGS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Core Settings: Scan Timeframe: D (Daily), W (Weekly), M (Monthly) Data Mode: Confirmed (no repaint) vs Live (real-time) Session & Filters: RTH Only: Limit signals to market hours Minimum Score: Filter low-quality signals Signal Cooldown: Prevent over-trading Trade Style: Allow Mean Reversion / Allow Momentum Toggle each style independently Trade Management: Stop ATR Multiplier: Stop distance Risk:Reward Ratio: Target calculation Momentum Stop Multiplier: Tighter stops for breakouts HTF Bar Labels: Show/Hide labels Number of bars to display (1-10) Label size and position ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 ALERTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Long Signal / Short Signal — Entry triggers Ready Long / Ready Short — Approaching trigger Long Stopped / Short Stopped — Stop hit Long Target Hit / Short Target Hit — Target reached ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📖 HOW TO USE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1. Identify setup from Scanner Use TDL Formation Scanner to find high-quality setups. Check the CONF column for confluence rating. 2. Apply Execution Suite Add this indicator to the individual chart. 3. Review bar sequence Check the HTF bar labels to see recent bar types. 4. Confirm formation and location Check dashboard for formation type and edge proximity. 5. Wait for trigger Watch for signal status to change to LONG/SHORT. 6. Execute with stops/targets Use displayed stop and target levels for trade management. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔗 COMPANION INDICATOR ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Use with TDL: Formation Scanner for: Multi-symbol scanning (20 at once) Sector-based watchlists (14 buckets) Quick confluence assessment Setup prioritization and filtering ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ REPAINTING NOTICE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ "Confirmed" mode (default): Uses last completed bar. NO REPAINTING. "Live" mode: Uses forming bar. WILL REPAINT until bar closes. Default is "Confirmed" for reliable backtesting and forward signals. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ DISCLAIMER ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ This indicator is for educational and informational purposes only. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always use proper risk management and never risk more than you can afford to lose. ════════════════════════════════════════════════════════
Indicatore Pine Script®
di TDecisionslab
TDL: Formation Scanner: Symbol Scanner with Broadening Formation═══════════════════════════════════════════════════════ TDL: Formation Scanner Multi-Symbol Scanner with Broadening Formation Analysis ═══════════════════════════════════════════════════════ A comprehensive multi-symbol scanner implementing bar-by-bar price action analysis with advanced broadening formation detection and trade style classification. Scan up to 20 symbols simultaneously across 14 pre-defined sector buckets. Identify high-quality setups with detailed scoring, formation analysis, and actionable trade recommendations. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔑 KEY FEATURES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Scan 20 symbols at once across 14 sector buckets Bar-by-bar classification (1, 1-1, 2U, 2D, 3) Five-factor weighted scoring system (0-100) Broadening formation detection (7 pattern types) Trade style classification (Mean Reversion vs Momentum) Confluence rating based on multiple aligned factors Reversal pattern detection (2-2 Rev, 3-2 Rev, Failed BO) Edge-based action recommendations with detailed tooltips SPY relative strength integration Time-of-day weighting (power hour, closing drive) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ] 📊 SCANNER COLUMNS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SYM — Symbol (color-coded by trade style) TYPE — Bar classification (1, 1-1, 2U, 2D, 3) SIGNAL — Current trigger status (LONG/SHORT/RDY/WAIT) PRICE — Current price SCORE — Quality score (0-100) with grade ENTRY — Distance to trigger or extent past trigger WHY — Key factors (good tags | warning tags) BRDG — Broadening formation type and bias LOC — Location within formation (Upper/Lower/Mid) PAT — Reversal pattern detected CONF — Confluence rating (⭐⭐⭐ to ○) ACTION — Recommended trade action ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📚 BAR TYPE CLASSIFICATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Every bar is classified by comparing to the prior bar: ★1-1 (Inside of Inside) — Coiling energy, highest potential ★1 (Inside) — Range contraction, either direction 2U (2-Up) — Broke prior high, held low → LONG ONLY 2D (2-Down) — Broke prior low, held high → SHORT ONLY 3 (Outside) — Broke both → Use close position for direction Critical Rule: The scanner respects directional rules: 2U bars can ONLY trigger long entries 2D bars can ONLY trigger short entries Inside bars wait for trigger direction Outside bars use close location for bias ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 BROADENING FORMATION DETECTION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Detects 7 types of expanding range patterns: MF (Megaphone) — Higher highs + Lower lows → Neutral ABW (Asc Broadening Wedge) — Both rising, highs steeper → Bear DBW (Desc Broadening Wedge) — Both falling, lows steeper → Bull BWB (Broadening Wedge Bottom) — Highs rising faster → Bull BWT (Broadening Wedge Top) — Lows falling faster → Bear ARA (Asc Right-Angle) — Flat highs + Rising lows → Bull DRA (Desc Right-Angle) — Falling highs + Flat lows → Bear Location Detection: ▲ UPPER = Near upper boundary (favors short/fade) ▼ LOWER = Near lower boundary (favors long/fade) MID = Middle zone (wait for edge) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔄 TRADE STYLE CLASSIFICATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🟢 MEAN REVERSION — Fade the edges (A+) = Perfect setup: Edge + Pattern + Bias aligned (Go) = Good setup: Edge + Bias aligned (Caution) = Edge setup but against formation bias 🔵 MOMENTUM — Follow the breakout/breakdown (Breakout+) = Long through upper with Bull bias (Breakdown+) = Short through lower with Bear bias (Breakout) = Long through upper (no bias support) (Breakdown) = Short through lower (no bias support) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⭐ CONFLUENCE RATING (CONF Column) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Confluence rating based on aligned factors: MEAN REVERSION: ⭐⭐⭐ 🟢 = Strong: Edge + Pattern + Bias aligned ⭐⭐ 🟡 = Moderate: Some factors aligned ⭐ 🟠 = Low: Minimal confluence MOMENTUM: ⭐⭐ 🟡 = Bias aligned breakout/breakdown ⭐ 🟠 = Neutral bias ○ 🔴 = Against formation bias NO RATING: — = Middle zone or no formation detected Hover over CONF column for detailed breakdown of factors. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔍 REVERSAL PATTERNS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2-2 Rev — Consecutive opposite 2-bars at edge Example: 2U → 2D at upper edge = Strong reversal 3-2 Rev — Outside bar followed by directional 2-bar Example: 3 → 2D at upper edge = Reversal after expansion Failed BO — Price broke edge then reversed back inside Trap pattern with strong reversal potential ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 FIVE-FACTOR SCORING SYSTEM ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Each setup scored 0-100 based on: 1. Setup Quality (20%) — Bar type (1-1 > 1 > 2 > 3) 2. Trigger Timing (20%) — Fresh > Ready > Running > Extended 3. Trend Alignment (20%) — EMA relationship and slope 4. Participation (15%) — Volume and close location 5. Risk Quality (15%) — Range size, gap risk 6. Regime (10%) — Volatility compression/expansion Grades: A+ (85+) | A (75+) | B+ (65+) | B (55+) | C (<55) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📁 SECTOR BUCKETS (14 Groups) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1A - Indices & Mega Tech 1B - Sector ETFs & Crypto-related 2A - Semiconductors 2B - Tech & SaaS 3A - Banks 3B - Finance & Insurance 4A - Consumer 4B - Retail & Travel 5A - Healthcare 5B - Biotech 6A - Energy 6B - Industrial 7A - Speculative 7B - Growth ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ KEY SETTINGS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Scan Settings: Scan Timeframe: D (Daily), W (Weekly), M (Monthly) Data Mode: Confirmed (no repaint) vs Live Min Score: Filter low-quality setups Status Filters: Show Triggered / Ready / Watch Inside Bars Only Hide Extended Signals Broadening Settings: Edge Zone Threshold: 15% / 20% / 25% Boost/Penalize edge setups Show broadening stocks only Trade Style Filters: Show Mean Reversion setups Show Momentum setups ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📖 HOW TO USE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1. Select sector bucket Choose from 14 pre-defined groups. 2. Review scanner results Sorted by priority (triggered > ready > watch) and score. 3. Check CONF column More stars = more factors aligned. 4. Check ACTION column Shows recommended trade style and direction. 5. Apply Execution Suite Add companion indicator to individual chart for execution. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔗 COMPANION INDICATOR ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Use with TDL: Trade Execution Suite for: Visual formation boundaries on chart Precise entry trigger lines Stop and target levels HTF bar type labels Real-time trade management ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ REPAINTING NOTICE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ "Confirmed" mode (default): Uses last completed bar. NO REPAINTING. "Live" mode: Uses forming bar. WILL REPAINT until bar closes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ DISCLAIMER ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ This indicator is for educational and informational purposes only. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always use proper risk management. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Indicatore Pine Script®
di TDecisionslab
Canadian Sector Rotation Momentum, Invite OnlyCanadian Sector Rotation Momentum — Invite-Only (Integrity Edition) Contact : gm2hoops@gmail.com Purpose Sector rotation + market alignment dashboard using normalized Heat (-100..100) with higher timeframe confirmation, confluence scoring, optional whale markers, and an MTF matrix. Documentation (PDF) Quick Start: github.com CAN_Master_Pro_Quick_Start_v2.pdf github.com Support: Send screenshot + BUILD ID shown on the dashboard. gm2hoops@gmail.com Access is tied to your TradingView username & email address. Policy: Cancel anytime; access remains until the end of the paid period. Because access is granted immediately (invite-only + digital docs), refunds are generally not provided. Billing issues: contact within 7 days with your TradingView username. Disclaimer Informational/educational only. Not financial advice. No guarantees. You are responsible for all decisions and risk management.
Indicatore Pine Script®
di cellophane