Multi-Timeframe Bias Dashboard + VolatilityWhat it is: A corner table (overlay) that gives a quick higher-timeframe read for Daily / 4H / 1H using EMA alignment, MACD, RSI, plus a volatility gauge.
How it works (per timeframe):
EMA block (50/100/200): “Above/Below/Mixed” based on price vs all three EMAs.
MACD: “Bullish/Bearish/Neutral” from MACD line vs Signal and histogram sign.
RSI: Prints the value and an ↑/↓ based on 50 line.
Volatility: Compares ATR(14) to its SMA over 20 bars → High (>*1.2), Normal, Low (<*0.8).
Bias: Combines three votes (EMA, MACD, RSI):
Bullish if ≥2 bullish, Bearish if ≥2 bearish, else Mixed.
Display:
Rows: D / 4H / 1H.
Columns: Bias, EMA(50/100/200), RSI, MACD, Volatility.
Bias cell is color-coded (green/red/gray).
Position setting lets you park the table in Top Right / Bottom Right / Bottom Left (works on mobile too).
Use it for:
Quickly aligning intraday setups with higher-TF direction.
Skipping low-volatility periods.
Confirming momentum (MACD/RSI) when price returns to your OB/FVG zones.
Analisi trend
Gann Box LogicGann Box Logic
Overview
The Gann Box Logic indicator is a precision-based trading tool that combines the principles of Gann analysis with retracement logic to highlight high-probability zones of price action. It plots a structured box on the chart based on the previous day's high and low, overlays Fibonacci-derived retracement levels, and visually marks a critical “neutral zone” between 38.2% and 61.8% retracements.
This zone — shaded for emphasis — is a decision filter for traders:
- It warns against initiating trades in this area (low conviction zone).
- It identifies reversal pull targets when extremes are reached.
Core Principles Behind Gann Box Logic
Logic 1 — The Neutral Zone (38.2% ↔ 61.8%)
- The 38.2% and 61.8% retracement levels are key Fibonacci ratios often associated with consolidation or indecision.
- Price action between these two levels is considered a neutral, low-conviction zone.
- Trading Recommendation:
- Avoid initiating new trades while price remains within this shaded band.
- This zone tends to produce whipsaws and false signals.
- Wait for a decisive break above 61.8% or below 38.2% for clearer momentum.
- Why it matters:
- In Gann’s market structure thinking, the middle range of a swing is often a battleground where neither bulls nor bears are in full control.
- This is the zone where market makers often shake out weak hands before committing to a direction.
Logic 2 — Extremes Seek Balance (0% & 100% Reversal Bias)
- The indicator’s 0% and 100% levels represent the previous day’s low and high respectively.
- First Touch Rule:
- When the price touches 0% (previous low) or 100% (previous high) for the first time in the current session, there is a high probability it will attempt to revert toward the center zone (38.2% ↔ 61.8%).
- Trading Implication:
- If price spikes to an extreme, be alert for reversion trades toward the mid-zone rather than expecting a sustained breakout.
- Momentum traders may still pursue breakout trades, but this bias warns of potential pullbacks.
- Why it works:
- Extreme levels often trigger profit-taking by early entrants and counter-trend entries by mean-reversion traders.
- These forces naturally pull the market back toward equilibrium — often near the 50% level or within the shaded zone.
How the Indicator is Plotted
1. Previous Day High/Low Reference — The script locks onto the prior day’s range to establish the vertical bounds of the box.
2. Retracement Levels — Key Fibonacci levels plotted: 0%, 25%, 38.2%, 50%, 61.8%, 75%, 100%.
3. Box Structure — Outer Border marks the full prior day range, Mid Fill Zone is shaded between 38.2% and 61.8%.
4. VWAP (Optional) — Daily VWAP overlay for intraday bias confirmation.
Practical Usage Guide
- Avoid Trades in Neutral Zone — Stay out of the shaded area unless you’re already in a trade from outside this zone.
- Watch for First Touch Extremes — First touch at 0% or 100% → anticipate a pullback toward the shaded zone.
- Breakout Confirmation — Only commit to breakout trades when price leaves the 38.2–61.8% zone with strong volume and momentum.
- VWAP Confluence — VWAP crossing through the shaded zone often signals a balance day — breakout expectations should be tempered.
Strengths of Gann Box Logic
- Removes noise trades during low-conviction periods.
- Encourages patience and discipline.
- Highlights key market turning points.
- Provides clear visual structure for both new and advanced traders.
Limitations & Warnings
- Not a standalone entry system — best used in conjunction with price action and volume analysis.
- Extreme moves can sometimes trend without reversion, especially during news-driven sessions.
- Works best on intraday timeframes when referencing the previous day’s range.
In Summary
The Gann Box Logic indicator’s philosophy can be boiled down to two golden rules:
1. Do nothing in the middle — Avoid trades between 38.2% and 61.8%.
2. Expect balance from extremes — First touches at 0% or 100% often pull back toward the shaded mid-zone.
This dual approach makes the indicator both a trade filter and a targeting guide, allowing traders to navigate markets with a structured, Gann-inspired framework.
DISCLAIMER
The information provided by this indicator is for educational purposes only and should not be considered financial advice. Trading carries risk, including possible loss of capital. Past performance does not guarantee future results. Always conduct your own research and consult with a qualified financial professional before making trading decisions.
Moving Average Ribbon x 8Moving Average Ribbon 8 Lines FH
One indicator shows a moving averages of 8. You can choose different types of moving averages, colours and styles.
EMA Crossover with AlertsIndicator with Fast and Slow EMA Crossovers, includes alerts on such cross overs
Trading Session Zones - Asia, London, NY - AMD
What it does:
This Pine Script indicator automatically identifies and highlights the high/low price ranges for the three major global trading sessions: Asia, London, and New York. It draws filled colored boxes around each session's price action, making it easy to spot key support/resistance levels and session boundaries
Key Features:
Three distinct colored zones: Teal for Asia, Blue for London, Orange for New York
Filled boxes with transparency: Clear visibility without obscuring price action (80% transparency)
Session labels:Each box displays the session name in the center
Clean transitions: London session automatically ends when New York begins (no overlap)
Real-time updates:Boxes expand as sessions progress, tracking new highs and lows
Technical Details:
Uses user-defined types for efficient session tracking
Automatically handles session transitions
Works on any timeframe and any instrument
Optimized for performance with proper object limits
SPX Futures Momentum Detector (MVP Enhanced)Our SPX Futures Momentum Detector is a precision trading tool built for professional futures and options traders.
Optimized for SPX and ES/MES futures, this indicator identifies high probability momentum entries, filters noise, and provides clear CALL/PUT signals for rapid decision-making.
It layers proprietary filters to reduce false positives in volatile or choppy conditions.
This enhanced version leverages our proprietary MVP Momentum framework, incorporating Renko-style brick simulation and momentum confirmation layers.
It is designed for scalping and short-term swing strategies in highly liquid markets.
**Key Features**
• Proprietary momentum detection logic
• Optimized for 5m, 15m, and Renko charts
• Works with SPX, ES, and MES futures contracts and any highly liquid option contracts
• CALL/PUT labeling with A+ setup classification (Hot CALL Signal)
• Zero repaint logic for reliable backtesting
**What it does**
• Detects momentum inflections on SPX/ES/MES using a Renko-style brick simulation + dual EMA context.
• Designed for 1m–5m timeframes; exceptional clarity on Line Break charts.
• Signals: CALL (momentum up), PUT (momentum down). No lookahead; signals print on confirmed bar close.
**How to use**
• Recommended charts: SPX, ES, MES (futures) or any highly liquid options charts.
• Recommended chart types: Line Break for clarity; standard candles for entry points.
• Timeframes: 1m or 5m (scalping to intraday).
• Add alerts: “CALL Signal” and “PUT Signal”, set to “Once per bar close.”
**Inputs explained**
• Fast EMA / Slow EMA – Short/medium trend filters for momentum context.
• Renko Box Size ($) – Sensitivity of the brick simulation (larger = fewer but higher-quality signals).
• Confirmation Bars – Ensures price follow-through (filters weak trends).
• Volume Breakout Multiplier – Confirms breakouts with significant volume increase.
• Consolidation Bars – Filters out sideways action before a momentum shift.
**Risk & limitations**
• Momentum tools perform best in trending sessions. Expect fewer clean signals in chop.
• No guarantees of profit. Use with your own risk management and exit plan.
• Backtest across multiple regimes (trend, post-FOMC, month-end) before live use.
**Best practices**
• Pair with optional companion exit logic for trade management.
• Use alerts at bar close to avoid noise.
• Not recommended for full automation yet: validate broker fills, slippage, and latency.
**Disclaimers**
• Educational tool. Not financial advice. Past performance ≠ future results.
• We do not guarantee outcomes, you are responsible for your trades.
**Changelog**
v1.0 – Initial invite-only release (MVP Enhanced): Renko-style momentum + EMA filters, bar-close alerts, repaint safe security calls.
Enhanced Circle CandlestickEnhanced Circle Candlestick
This script transforms standard candlesticks into circles, visualizing momentum, volume, and volatility in a unique way. The size and color of the circles change based on the body size of the candlestick, while a change in color signifies a volume spike. Long wicks are also highlighted, providing a quick visual cue for potential reversals or indecision.
Features
Circle Visualization: Replaces the standard candlestick body with a circle. The size of the circle is determined by the size of the candlestick body, making it easy to spot periods of high momentum.Gradient Color: The circle's opacity changes based on the body size. Smaller bodies have a lighter color, while larger, more powerful bodies have a darker, more vivid color. This visual gradient provides a clear indication of a bar's strength.Volume Spike Highlight: The circle's color will change to a bright yellow when the current volume exceeds the average volume by a user-defined factor, indicating a significant influx of buying or selling pressure.Long Wick Markers: The script draws a small triangle above or below the candlestick when a wick's length surpasses a user-defined percentage of the body's size. This helps identify potential exhaustion, rejection, or indecision in the market.
Settings
Bullish/Bearish Color: Customize the base colors for bullish (green) and bearish (red) circles.Volume Spike Color: Choose the color for the circle when a volume spike occurs.Volume Spike Factor: Set the multiplier for the volume spike detection. For example, a value of 2.0 means a volume spike is detected when the current volume is twice the 20-period moving average.Circle Opacity (0-100): Adjust the base transparency of the circles. Lower numbers result in more opaque (solid) colors.Opacity Factor: Controls how quickly the color gradient changes based on the body size. A higher value makes the color change more dramatic.Wick Length Factor (vs Body): Set the threshold for marking long wicks. A value of 0.8 means a wick is marked if its length is 80% or more of the candlestick body's size.
How to Use
Add this indicator to your chart.Open the Chart Settings.In the "Symbol" tab, set the transparency of the candlestick "Body" to 0%. (This step is essential because the indicator's settings will not be applied when the indicator is not selected, and the default platform settings take precedence.)
I do not speak English at all. Please understand that if you send me a message, I may not be able to reply, or my reply may have a different meaning. Thank you for your understanding.
EEI Strategy — Greedy/Guarded v1.2Purpose
Day‑trading strategy (5‑min focus) that hunts “armed” setups (PRE) and confirms them (GO) with greedy-but‑guarded execution. It adapts to symbol type, trend strength, and how long it’s been since the last signal.
Core signals & regime
Trend/Regime: EMA‑200 (intraday bias), VWAP, and a non‑repainting HTF EMA (via request.security(...) ).
Momentum/Structure: Manual Wilder DMI/ADX, micro‑ribbon (EMA 8/21), Bollinger‑Keltner squeeze + “squeeze fire,” BOS (break of swing high/low), pullback to band.
Liquidity/Vol: RVOL vs SMA(volume) + a latch (keeps eligibility a few bars after the first spike).
Volatility: ATR + ATR EMA (expansion).
PRE / GO engine
Score (0–100) aggregates trend, momentum, RVOL, squeeze, OBV slope, ribbon, pullback, BOS, and an Opening‑Range (OR) proximity penalty.
PRE arms when the adjusted score ≥ threshold and basic hygiene passes (ATR%, cooldown, etc.).
GO confirms within a dynamic window (1–3 bars):
Wick‑break mode on hot momentum (trend‑day / high ADX+RVOL): stop orders above/below the PRE high/low with a tick buffer.
Close‑through mode otherwise: close must push through PRE high/low plus ATR buffer.
Chase guard: entry cannot be too far from PRE price (ATR‑based), with a tiny extra allowance when the 8/21 ribbon aligns.
Multiple PREs per squeeze (capped) + per‑entry cooldown.
Adaptive behavior
Presets (Conservative/Balanced/Aggressive/Turbo) shift score/ADX/RVOL/ATR gates, GO window, cooldown, and max chase.
Profiles / Auto by Symbol:
Mega Trend (e.g., AMD/NVDA/TSLA/AAPL): looser chase, ATR stop, chandelier trail.
Mid Guarded (e.g., TTD/COIN/SOFI): swing stop, EMA trail, moderate gates.
Small Safe (e.g., BTAI/BBAI class): tighter gates, more guardrails.
BBAI micro‑override: easier arming (lower score/ADX/RVOL), multi‑PRE=3, swing stop + EMA trail, lighter OR penalty.
Trend‑day detector: if ADX hot + RVOL strong + ATR expanding + distance from day‑open large → GO window = 1 and wick‑break mode.
Mid‑day relaxers: mild score bonus between 10:30–14:30 to keep signals flowing in quieter tape.
Auto‑Relaxer (no‑signal fallback): after N bars without PRE/GO, gradually lowers score/ADX/RVOL/ATR% gates and raises max chase so the engine doesn’t stall on sleepy symbols.
Auto‑Session fallback: if RTH session isn’t detected (some tickers/premarket), it falls back to daily boundaries so Opening Range and day‑open logic still work.
Risk & exits
Initial stop per side chosen by ATR, Swing, or OR (computed every bar; no conditional calls).
Scaled targets: TP1/TP2 (R‑based) + runner with optional Chandelier or EMA trailing.
BE logic: optional move to breakeven after TP1; trailing can start after TP1 if configured.
Opening Range (OR)
Computes day open, OR high/low over configurable minutes; applies a penalty when entries are too close to OR boundary (lighter for small caps/BBAI). Protects against boundary whips.
Alerts & visuals
Alertconditions: PRE Long/Short Armed, GO Long/Short + explicit alert() calls for once‑per‑bar automation.
Plots: EMA‑200, HTF EMA, BB/KC bands, OR lines, squeeze shading, and PRE markers.
Why it’s robust
Non‑repainting HTF technique, all series precomputed every bar, no function calls hidden in conditionals that could break history dependence, and consistent state handling (var + sentinels).
Tuning cheat‑sheet (fast wins)
More trades: lower scoreBase, adxHot, or rvolMinBase a notch; reduce cooldownBase; increase maxPREperSqueeze.
Fewer whips: increase closeBufferATR, wickBufferTicks, or atrMinPct; reduce maxChaseATRBase.
Trend capture: use trailType="Chandelier", smaller trailLen, slightly larger trailMult; set preset="Aggressive".
Choppy names: prefer stopMode="Swing", enable EMA trail, keep OR penalty on.
Berkusa trend 2This is a strategy created purely for educational and testing purposes. It is not recommended for buy/sell decisions. You can test it and provide feedback to see whether it works for trend-following. It is written with a simple logic similar to SuperTrend. I believe it might be useful for scalping. However, do not use it for trading without careful observation.
FXWIZ NeoLine-T3 AlignFXWIZ NeoLine-T3 Align PRO is a dual-signal precision tool combining:
1) NeoLine (ATR + Bollinger Bands) trend reversal signal
2) Adaptive RSI-driven T3 alignment signal
Concept:
- NeoLine detects breakout-based trend shifts with optional ATR filtering.
- Adaptive RSI T3 Line adjusts dynamically in length to market momentum.
- Background highlight appears only when the active trade mode (from NeoLine) aligns with the T3 crossover in the same direction.
- Two independent but complementary signals:
• NeoLine Trend Flip (▲ / ▼)
• T3 Align Event (BG highlight + alerts)
The built-in MTF Signal Table shows the NeoLine vs T3 crossover trend for five user-selected timeframes.
Unique Points:
- Dual confirmation system reduces false entries.
- Visual minimalism: clean line plots, single background highlight.
- Alerts for both trend flips and alignment events.
Invite-Only: FXWIZ students & community members only. No redistribution or resale.
Portions of the T3/RSI concept are inspired by ChartPrime (MPL 2.0). Logic reimplemented and integrated by FXWIZ.
[Top] ≈ SyncLineFind the hidden currents between markets.
What it does
SyncLine overlays up to three cross-asset guide lines on your current chart, translating each selected symbol’s intraday position into the price scale of the chart you’re viewing. The result is a clean, session-aware “sync” of other markets on your chart so you can quickly spot alignment, leadership, and divergence without clutter.
How it works
For each selected symbol, SyncLine calculates that symbol’s intraday position relative to its own session baseline, then projects that position onto your active chart based on its own baseline.
Lines reset each session to remain relevant to the current day’s action.
Optional smoothing makes the guides easier to read during noisy tape.
Note: This script is intraday-only . It will stop with a clear warning if applied to non-intraday timeframes.
Inputs
Symbols
Show Symbol 1/2/3 – Toggle each overlay line.
Symbol 1/2/3 – Choose any ticker (e.g., index futures, ETFs, single names).
Color 1/2/3 – Line colors.
Labels - Optional labels for each line.
Smoothing
Enable Smoothing – On/Off.
Method – EMA / SMA / WMA / RMA.
Length – 1–50.
How to use
Add one or more driver markets (e.g., ES, NQ, DXY, sector leaders) to observe when they align with your instrument.
Look for:
Confluence : your price and one or more SyncLines moving together.
Leadership : a SyncLine turns/accelerates before your price.
Divergence : your price disagrees with the majority of SyncLines.
Notes & limitations
Designed for intraday timeframes (1m–1h).
Lines are calculated from completed data and do not repaint after bar close .
Works best during regular liquid sessions ; thin markets can reduce signal quality.
Best practices
Pair SyncLine with your execution framework (structure, liquidity zones, time-of-day).
Use distinct colors for each symbol and keep the set small (1–3) for clarity.
5 Min Scalping Oscillator### Overview
The 5 Min Scalping Oscillator is a custom oscillator designed to provide traders with a unified momentum signal by fusing normalized versions of the Relative Strength Index (RSI), Stochastic RSI, and Commodity Channel Index (CCI). This combination creates a more balanced view of market momentum, overbought/oversold conditions, and potential reversals, while incorporating adaptive smoothing, dynamic thresholds, and market condition filters to reduce noise and false signals. Unlike standalone oscillators, the 5 Min Scalping Oscillator adapts to trending or sideways regimes, volatility levels, and higher timeframe biases, making it particularly suited for short-term charts like 5-minute timeframes where quick, filtered signals are valuable.
### Purpose and Originality of the Fusion
Traditional oscillators like RSI measure momentum but can lag in volatile markets; Stochastic RSI adds sensitivity to RSI extremes but often generates excessive noise; and CCI identifies cyclical deviations but may overreact to minor price swings. The 5 Min Scalping Oscillator addresses these limitations by weighting and blending their normalized outputs (RSI at 45%, Stochastic RSI at 35%, and CCI at 20%) into a single raw oscillator value. This weighted fusion creates a hybrid signal that balances lag reduction with noise filtering, resulting in a more robust indicator for identifying reversal opportunities.
The originality lies in extending this fusion with:
- **Adaptive Smoothing via KAMA (Kaufman's Adaptive Moving Average):** Adjusts responsiveness based on market efficiency, speeding up in trends and slowing in ranges—unlike fixed EMAs, this helps preserve signal integrity without over-smoothing.
- **Dynamic Overbought/Oversold Thresholds:** Calculated using rolling percentiles over a user-defined lookback (default 200+ periods), these levels adapt to recent oscillator behavior rather than relying on static values like 70/30, making the indicator more responsive to asset-specific volatility.
- **Multi-Factor Filters:** Integrates ADX for trend detection, ATR percentiles for volatility confirmation, and optional higher timeframe RSI bias to ensure signals align with broader market context. This layered approach reduces false positives (e.g., ignoring low-volatility crossovers) and adds a confidence score based on filter alignment, which is not typically found in simple mashups.
This design justifies the combination: it's not a mere overlay of indicators but a purposeful integration that enhances usefulness by providing context-aware signals, helping traders avoid common pitfalls like trading against the trend or in low-volatility chop. The result is an original tool that performs better in diverse conditions, especially on 5-minute charts for intraday trading, where rapid adaptations are key.
### How It Works
The 5 Min Scalping Oscillator processes price data through these steps:
1. **Normalization and Fusion:**
- RSI (default length 10) is normalized to a -1 to +1 scale using a tanh transformation for bounded output.
- Stochastic RSI (default length 14) is derived from RSI highs/lows and scaled similarly.
- CCI (default length 14) is tanh-normalized to align with the others.
- These are weighted and summed into a raw value, emphasizing RSI for core momentum while using Stochastic RSI for edge sensitivity and CCI for cycle detection.
2. **Smoothing and Signal Line:**
- The raw value is smoothed (default KAMA with fast/slow periods 2/30 and efficiency length 10) to reduce whipsaws.
- A shorter signal line (half the smoothing length) is added for crossover detections.
3. **Filters and Enhancements:**
- **Trend Regime:** ADX (default length 14, threshold 20) classifies markets as trending (ADX > threshold) or sideways, allowing signals in both but prioritizing alignment.
- **Volatility Check:** ATR (default length 14) percentile (default 85%) ensures signals only trigger in above-average volatility, filtering out flat markets.
- **Higher Timeframe Bias:** Optional RSI (default length 14 on 60-minute timeframe) provides bull/neutral/bear bias (above 55, 45-55, below 45), requiring signal alignment (e.g., bullish signals only if bias is neutral or bull).
- **Dynamic Levels:** Percentiles (default OB 85%, OS 15%) over recent oscillator values set adaptive overbought/oversold lines.
4. **Signal Generation:**
- Bullish (B) signals on upward crossovers of the smoothed line over the signal line, filtered by conditions.
- Bearish (S) signals on downward crossunders.
- Each signal includes a confidence score (0-100) based on factors like trend alignment (25 points), volatility (15 points), and bias (20 points if strong, 10 if neutral).
The output includes a glowing oscillator line, histogram for divergence spotting, dynamic levels, shapes/labels for signals, and a dashboard table summarizing regime, ADX, bias, levels, and last signal.
### How to Use It
This indicator is easy to apply and interpret, even for beginners:
- **Adding to Chart:** Apply the 5 Min Scalping Oscillator to a clean chart (no other indicators unless explained). It's non-overlay, so it appears in a separate pane. For 5-minute timeframes, keep defaults or tweak lengths shorter for faster response (e.g., RSI 8-12).
- **Interpreting Signals:**
- Look for green upward triangles labeled "B" (bullish) at the bottom for potential entry opportunities in uptrends or reversals.
- Red downward triangles labeled "S" (bearish) at the top signal potential exits or shorts.
- Higher confidence scores (e.g., 70+) indicate stronger alignment—use these for priority trades.
- Watch the histogram for divergences (e.g., price higher highs but histogram lower highs suggest weakening momentum).
- Dynamic OB (green line) and OS (red line) help gauge extremes; signals near these are more reliable.
- **Dashboard:** At the bottom-right, it shows real-time info like "Trending" or "Sideways" regime, ADX value, HTF bias (Bull/Neutral/Bear), OB/OS levels, and last signal—use this for quick context.
- **Customization:** Adjust inputs via the settings panel:
- Toggle KAMA for adaptive vs. EMA smoothing.
- Set HTF to "60" for 1-hour bias on 5-min charts.
- Increase ADX threshold to 25 for stricter trend filtering.
- **Best Practices:** Combine with price action (e.g., support/resistance) or volume for confirmation. On 5-min charts, pair with a 1-hour HTF for intraday scalping. Always use stop-losses and risk no more than 1-2% per trade.
### Default Settings Explanation
Defaults are optimized for 5-minute charts on volatile assets like stocks or forex:
- RSI/Stoch/CCI lengths (10/14/14): Shorter for quick momentum capture.
- Signal smoothing (5): Responsive without excessive lag.
- ADX threshold (20): Balances trend detection.
- ATR percentile (0.85): Filters ~15% of low-vol signals.
- HTF RSI (14 on 60-min): Aligns with hourly trends.
- Percentiles (OB 85%, OS 15%): Adaptive to recent data.
If changing, test on historical data to ensure fit—e.g., longer lengths for less noisy assets.
### Disclaimer
The 5 Min Scalping Oscillator is an educational tool to visualize momentum and does not guarantee profits or predict future performance. All signals are based on historical calculations and should not be used as standalone trading advice. Past results are not indicative of future outcomes. Traders must conduct their own analysis, use proper risk management, and consider market conditions. No claims are made about accuracy, reliability, or performance.
EDWARDS SQUEEZE 3MINUTE DOWSqueeze Momentum Strategy with EMA780 Trend Filter, ATR-SL, PT, EMA5 Exit Filter, and 3:57 PM Close
Golden Launch Pad🔰 Golden Launch Pad
This indicator identifies high-probability bullish setups by analyzing the relationship between multiple moving averages (MAs). A “Golden Launch Pad” is formed when the following five conditions are met simultaneously:
📌 Launch Pad Criteria (all must be true):
MAs Are Tightly Grouped
The selected MAs must be close together, measured using the Z-score spread — the difference between the highest and lowest Z-scores of the MAs.
Z-scores are calculated relative to the average and standard deviation of price over a user-defined window.
This normalizes MA distance based on volatility, making the signal adaptive across different assets.
MAs Are Bullishly Stacked
The MAs must be in strict ascending order: MA1 > MA2 > MA3 > ... > MA(n).
This ensures the short-term trend leads the longer-term trend — a classic sign of bullish structure.
All MAs Have Positive Slope
Each MA must be rising, based on a lookback period that is a percentage of its length (e.g. 30% of the MA’s bars).
This confirms momentum and avoids signals during sideways or weakening trends.
Price Is Above the Fastest MA
The current close must be higher than the first (fastest) moving average.
This adds a momentum filter and reduces false positives.
Price Is Near the MA Cluster
The current price must be close to the average of all selected MAs.
Proximity is measured in standard deviations (e.g. within 1.0), ensuring the price hasn't already made a large move away from the setup zone.
⚙️ Customization Options:
Use 2 to 6 MAs for the stack
Choose from SMA, EMA, WMA, VWMA for each MA
Adjustable Z-score window and spread threshold
Dynamic slope lookback based on MA length
Volatility-adjusted price proximity filter
🧠 Use Case:
This indicator helps traders visually and systematically detect strong continuation setups — often appearing before breakouts or sustained uptrends. It works well on intraday, swing, and positional timeframes across all asset classes.
For best results, combine with volume, breakout structure, or multi-timeframe confirmation.
New RSI📌 New RSI
The New RSI is a modern, enhanced version of the classic RSI created in 1978 — redesigned for today’s fast-moving markets, where algorithmic trading and AI dominate price action.
This indicator combines:
Adaptive RSI: Adjusts its calculation length in real time based on market volatility, making it more responsive during high volatility and smoother during calm periods.
Dynamic Bands: Upper and lower bands calculated from historical RSI volatility, helping you spot overbought/oversold conditions with greater accuracy.
Trend & Regime Filters: EMA and ADX-based detection to confirm signals only in favorable market conditions.
Volume Confirmation: Signals appear only when high trading volume supports the move — green volume for bullish setups and red volume for bearish setups — filtering out weak and unreliable trades.
💡 How it works:
A LONG signal appears when RSI crosses above the lower band and the volume is high with a bullish candle.
A SHORT signal appears when RSI crosses below the upper band and the volume is high with a bearish candle.
Trend and higher timeframe filters (optional) can help improve precision and adapt to different trading styles.
✅ Best Use Cases:
Identify high-probability reversals or pullbacks with strong momentum confirmation.
Avoid false signals by trading only when volume validates the move.
Combine with your own support/resistance or price action strategy for even higher accuracy.
⚙️ Fully Customizable:
Adjustable RSI settings (length, volatility adaptation, smoothing)
Dynamic band sensitivity
Volume threshold multiplier
Higher timeframe RSI filter
Color-coded background for market regime visualization
This is not just another RSI — it’s a complete, next-gen momentum tool designed for traders who want accuracy, adaptability, and confirmation in every signal.
Berkusa-trendThis is a strategy created purely for educational and testing purposes. It is not recommended for buy/sell decisions. You can test it and provide feedback to see whether it works for trend-following. It is written with a simple logic similar to SuperTrend. I believe it might be useful for scalping. However, do not use it for trading without careful observation.
U Table • LITEA compact, educational version of my workflow that combines trend, momentum, trend strength, and a clean trigger:
Trend: EMA Fast vs EMA Slow (auto-lengths by chart TF)
Momentum: RSI > 50 for longs / < 50 for shorts
Strength: ADX above a user-set threshold (fallback implementation; can be replaced by ta.adx() when available)
Trigger: price crosses the Bollinger basis (center line)
Signals
LONG: crossover(close, BB basis) while EMA Fast > EMA Slow, RSI > 50, ADX > threshold
SHORT: crossunder(close, BB basis) while EMA Fast < EMA Slow, RSI < 50, ADX > threshold
Visuals
EMA Fast / EMA Slow / BB basis
Markers “L” / “S” on triggers
Latest confirmed pivot high/low (broken line style)
Small diagnostics table (ADX, EMA relation, RSI, last pivots) on the last bar
Inputs
Pivot length: pivot confirmation window (default 5)
ADX threshold: minimum trend strength to allow signals (default 20)
Notes
Signals are intended to be evaluated on bar close. Intrabar values may change until the bar closes.
Pivot lines appear after confirmation; they do not repaint once confirmed.
No external data or security() calls are used.
This LITE build focuses on clarity and speed (few calculations, overlay-friendly). It can be used as a stand-alone study or as a scaffold for your own research and risk management.
FXWIZ HMA Net Filter PROFXWIZ HMA Net Filter PRO is a proprietary trend-bias tool that aggregates a net of 10 short-term HMAs (50→100) and validates them against a long HMA filter (300).
It updates a stateful bias when ≥ 8 of 10 short HMAs agree with price relative to their adaptive high/low HMA thresholds AND the long filter agrees. The output is a clean step-line net with an optional background highlight on bias flips; alerts trigger exactly on those flips.
How it works (concept):
• Each short HMA builds an adaptive “channel” using HMA of high and low; price above/below that threshold sets a per-line up/down state.
• We count up states (0–10).
• Bull bias: upCount ≥ 8 AND price above the long HMA-300 channel;
Bear bias: downCount ≥ 8 AND price below the HMA-300 channel.
• On state change the script paints background and fires alerts.
What’s unique vs public HMA nets:
• Fixed, deterministic 10-line grid (50,55,…,100) with high/low HMA thresholding (not a simple MA cross).
• Quantified consensus rule (8/10) + long-filter agreement to reduce noise/whipsaws.
• Minimal visuals: step-line net + single background; precise flip alerts.
Intended use:
Bias framework for scalping/day trading; pair with your own entries.
Invite-Only: FXWIZ students & community members only. No redistribution/resale.
FREEDOM - TJR Model\ FREEDOM – TJR Model\ 🚀
\ Automates TJR’s well-known NQ playbook with clean visuals, filters, and alerts—so you can focus on execution.\
\ Core idea\
1. Trade \ NQ\ in the \ New York session\ 🗽
2. Wait for a \ liquidity sweep\ of a \ prior session\ High/Low (Asia or London) ✂️
3. Confirm with \ SMT (NQ vs ES) divergence\ 🔀
4. Act on a \ proprietary entry signal\ 🔒
5. Risk at the swing 🛡️, target \ untapped internal/session liquidity\ 🎯
This indicator draws those session levels for you, tracks sweeps, detects SMT, applies higher-timeframe confluence, and fires alerts that respect your time window and filters.
---
\ What it draws & detects\
\ • Sessions & Liquidity Sweeps\ 🕒
* Plots \ Asia / London / New York\ session bands.
* On session close, it freezes the session’s \ High/Low\ as dotted “previous-session levels” and \ extends them forward\ until price \ crosses\ (choose \ Wicks\ or \ Close\ ).
* When price takes a previous-session \ High\ → \ Buyside sweep\ ; takes a \ Low\ → \ Sellside sweep\ .
* Optional \ Sweep Zones\ expand around the swept level using an \ ATR(21)\ margin; can auto-fade “fake” sweeps.
\ Tip: Keep “Extend previous session High/Low until cross” ON to maintain a clean roadmap into NY open.\
\ • SMT Divergence (NQ vs ES)\ 🔀
* Classic pivot-to-pivot SMT:
* \ Bearish SMT\ = NQ makes a \ higher high\ while ES does \ not\ .
* \ Bullish SMT\ = NQ makes a \ lower low\ while ES does \ not\ .
* Draws \ lines\ from pivot to pivot (no chart spam), with optional inline “SMT” label and optional confidence \ score\ (0–100) based on strength + recency.
* Context aware:
* Only shows \ Bearish SMT\ after a \ buy-side sweep\ (previous-session High taken).
* Only shows \ Bullish SMT\ after a \ sell-side sweep\ (previous-session Low taken).
* Respects your \ NY time window\ if enabled.
\ • Proprietary Entry Signals\ 🔒
* Prints entry lines + arrows only when your rules align (proprietary detection under the hood).
* Respects:
* \ Session-sweep bias\ (optional): Sells only after buy-side sweep; Buys only after sell-side sweep.
* \ Monotonic filter\ : new Sell must be \ higher\ than last Sell; new Buy must be \ lower\ than last Buy (resets each session).
* \ Minimum distance\ to nearest previous-session dotted level (in ticks).
* \ NY time filter\ window.
* \ HTF confluence\ (see below).
---
\ HTF Confluence (optional)\ 📈
* Choose \ MA slope\ (\ EMA/SMA/RMA/WMA\ ) or \ HH/HL structure\ on a higher timeframe (e.g., 60m/240m).
* Entry arrows and alerts can be gated so they only print when HTF bias agrees with the setup.
\ Tip: Start with EMA 50 on 60m for a smooth directional filter; add HH/HL only if you want stricter structure confirmation.\
---
\ Dashboard (bottom-right)\ 🧩
* \ VWAP state\ :
* \ Overbought\ (🔴) if close > VWAP + (mult × stdev)
* \ Oversold\ (🟢) if close < VWAP − (mult × stdev)
* Otherwise \ Neutral\ (⚪️)
* \ Premium / Discount\ vs previous-session 50% midline: Premium = above (red bias), Discount = below (green bias).
* \ SMT row\ : Bullish / Bearish / Neutral with optional score.
---
\ How to use the settings (quick tour)\
\ ENTRY\
* \ Entry Swing Length\ : lower = more signals.
* \ Confirmation\ : \ Candle Close\ or \ Wicks\ for breakout.
* \ Filter entry by session sweeps\ : enforces “sell after buy-side sweep, buy after sell-side sweep.”
* \ Minimum distance (ticks)\ : blocks entries too close to previous-session dotted levels.
* \ Replay mode\ : keeps entries visible in Bar Replay.
* \ NY Time filter\ : default \ 08:00–14:00 NY\ ; arrows/alerts respect the window.
* \ Arrow offset (ticks)\ : how far above/below the candle to plot the arrow.
\ SESSION SWEEPS\
* Toggle \ Buyside/Sellside zones\ , adjust \ ATR(21)\ margin & length.
* \ Hide Fake Sweep Zones\ (default ON).
* \ Extend H/L until cross\ (Wicks/Close).
* Optional \ daily reset\ for unswept dotted lines.
\ SESSIONS\
* Enable/disable \ Asia, London, NY AM, NY PM\ ; set start/end; choose color; extend midline if desired.
* DST toggles for NY/London.
\ HTF Confluence\
* Turn it ON/OFF; pick timeframe & method (MA slope or HH/HL); set MA type/length or swing length.
\ Dashboard\
* Show/hide table; set VWAP stdev length/multiplier.
* SMT settings: comparison symbol (\ default ES1!\ ), pivot length, show score/labels, recency window, etc.
\ Alerts\ (always last) 🔔
* \ Session line cross\ : choose Highs/Lows and crossing mode (\ Same as extension / Wicks / Close\ ).
* \ Entry alerts\ : \ Filtered / Unfiltered / Both\ .
* \ Filtered\ = respects sweep bias, HTF confluence, minimum distance, monotonic rule, and time window.
* \ Unfiltered\ = ignores sweep bias/HTF/monotonic (still respects minimum distance + time window).
* All entry alerts also respect the \ NY time window\ when enabled.
---
\ Suggested workflow\
* Open NQ on a 1–5m chart.
* Let the dotted \ previous-session H/L\ extend into NY; wait for a \ sweep\ .
* Check \ SMT\ : after buy-side sweep → look for \ bearish SMT\ ; after sell-side sweep → look for \ bullish SMT\ .
* Take the \ proprietary entry\ when filters agree.
* Stop at the swing; aim for \ untapped internal/session liquidity\ .
* Let \ alerts\ handle the monitoring.
---
\ Why traders like it\
* It mirrors the model popularized by \ TJR\ while removing the chart admin: sessions, sweeps, SMT, HTF gating, distances, monotonic sequencing, time windows, and ready-to-use alerts—so your execution stays consistent. ✨
---
\ Disclaimer\ ⚠️
\ This tool is for educational purposes only and does not constitute financial advice. Markets involve risk; always do your own research and test in replay/paper before trading live. FREEDOM – TJR Model is inspired by TJR’s publicly known framework but is not affiliated with, endorsed by, or sponsored by TJR. You are solely responsible for your trading decisions and outcomes.\
RS Power Scanner by MashrabThis script implements a custom IBD-style Relative Strength (RS) rating and RS line breakout scanner for any symbol versus SPY. It is designed to help traders quickly identify stocks with market-leading performance.
How It Works:
RS Rating (0–100 scale)
Calculates 252-bar Rate of Change (ROC) for the stock and SPY.
Compares stock ROC to SPY’s ROC.
Uses ta.percentrank() to convert the result into a percentile ranking (0–100).
A high RS rating means the stock has outperformed SPY over the past 252 bars.
RS Line New Highs
Plots the RS line = (Stock Close ÷ SPY Close).
Checks for a 50-bar highest value — a classic sign of market leadership.
Signal Logic
Plots a green ▲ label below bars when:
RS Rating ≥ 85 (strong relative performance)
RS line makes a 50-bar high (confirming strength)
Table Display
Shows live RS Rating and RS new high status for quick decision-making.
Use Case:
This tool is designed for traders using momentum, CAN SLIM, or relative strength strategies to spot potential leaders early. It is not a standalone buy/sell system; rather, it helps filter stocks for further analysis.
How to Use:
Apply to your watchlist charts.
Look for ▲ signals during market uptrends.
Combine with fundamental or volume analysis for best results.
Bollinger Bands x SmartBlackGirlBollinger Bands — Volatility & Breakout Zones
This Bollinger Bands tool dynamically adapts to market volatility, giving traders a visual framework for spotting overbought/oversold conditions, squeezes, and breakout opportunities.
Key Features
Dynamic Volatility Channels – Upper and lower bands expand during high volatility and contract during quiet periods.
Mean Reversion & Trend Trading – Price touching or piercing the bands can signal potential reversals or strong trend continuation.
Squeeze Detection – Narrowing bands indicate compression, often preceding explosive moves.
Fully Customizable – Adjust period, standard deviation, and colors to match your strategy.
Multi-Timeframe Friendly – Works on any chart, from scalping to swing trading.
How to Use
Squeeze Plays – Watch for band tightening; breakouts often follow.
Reversal Signals – Extreme touches combined with candlestick rejection may indicate turning points.
Trend Riding – Price “walking the band” can confirm strong momentum.
This indicator is ideal for traders who want a clear visual of volatility shifts, helping to anticipate when markets are likely to break out or revert to the mean.
