Inizia

Cerca negli script per "fvg"

D3m4h GIFVGDescription D3m4h GIFVG is an indicator designed to automatically detect market imbalances—often referred to as FVGs (Fair Value Gaps)—and potential pivot-based shifts in market structure. It offers a dynamic approach to visualizing supply/demand inefficiencies and pivot-based trend changes. Key features include: 1. Pivot-Based Bullish/Bearish Detection The indicator identifies higher-high/lower-low pivot logic as well as “outside bar” pivots. It tracks when the market transitions from bullish to bearish ranges, or vice versa, by using multiple checks: Pivot low/high detection Break-of-structure (when price crosses the last pivot) Opposing FVG detection to confirm an intraday pivot shift 2. FVG (Fair Value Gap) Detection The script automatically scans for bullish or bearish FVG conditions: Bullish FVG: Candle at position (bar_index - 2) has a high below the current candle’s low. Bearish FVG: Candle at position (bar_index - 2) has a low above the current candle’s high. When it detects an FVG, it draws a box on the chart to highlight the price gap (yellow boxes by default). 3. Pivot Range FVG If an FVG forms while the market is in a bullish pivot range, the script can paint a special “blue” FVG to underscore its significance. The same logic applies if a newly formed FVG appears in a bearish pivot range. 4. Filled Gap Cleanup You can optionally hide standard FVG boxes once they’re filled. For example, if the candle’s body (or candle range) covers that gap, the box is removed to keep your chart clean. 5. Pivot-Range FVG “Raided” Cleanup If the pivot-based FVG is later filled from the opposing direction, it turns green and can optionally remove itself after a set number of bars. 6. Informative Table A small table on the chart optionally displays whether or not the pivot-based FVG has been “raided”. You can toggle this table on/off in the settings. How It Works 1. Pivot Shifts The script tracks the last pivot high/low using a combination of candle-based pivot detection and break-of-structure checks (when price crosses the last pivot in the opposite direction). When a shift is detected, the pivot range ID increments—this helps the script know when to remove old pivot-based FVGs or draw new ones. 2. FVG Formation Each new bar checks if a bullish or bearish FVG formed (comparing the high of bar two bars ago to the current low, or the low of bar two bars ago to the current high). If one is found, a box is drawn to highlight the imbalance. Its color and extension depend on script settings. 3. Imbalance or Pivot FVG Standard imbalance boxes appear in yellow. If the new imbalance coincides with a bullish or bearish pivot range, a special “pivot imbalance” box in blue is drawn. 3. Hide Filled If a newly formed candle’s body fully covers the FVG, the box is considered filled. If Hide Filled Gaps is enabled, the box is deleted once it’s covered. 4. Raid Status For the pivot-based (blue) FVG, once price invalidates it from the opposite side, it changes color to green and gets removed after a user-defined number of bars. How to Use 1. Look for FVGs Observe yellow boxes to identify potential intraday imbalances. Watch for price returning to fill these zones. If you see a “blue” box, it signifies a pivot-based FVG in line with a recognized shift in structure—arguably a higher-probability zone. 2. “Hide Filled Gaps” Turn this on if you only want to see currently active or partially filled imbalances. The script cleans up old, fully covered boxes to keep your chart neat. 3. Pivot Shifts Note the script’s internal pivot logic. Each new pivot re-defines bullish or bearish states. Use these states to gauge the short-term trend shifts. 4. Toggle the Table You can show or hide the chart table by enabling/disabling “Show Table” from the inputs. This table indicates if the pivot-based “GIFVG” has been “raided” or not. 5. Extend Count Adjust the extendCount in the code if you want FVG boxes to extend further or shorter in time. Underlying Concepts Fair Value Gaps Market inefficiencies that occur when price jumps, leaving a “gap” from the candle 2 bars ago to the current candle. They can act like mini supply/demand zones where price may revisit for balance. Pivot Ranges The script tries to maintain an internal sense of whether the market is in a bullish or bearish pivot range. When it sees a contrary FVG or break-of-structure, it flips the pivot state. Outside Bars A candle that has both a higher high and a lower low than the previous bar. The script uses these to mark significant pivot shifts. By combining pivot-based logic with FVG detection, the D3m4h GIFVG indicator helps highlight potential areas of liquidity or unfilled value. Traders can use these zones to plan entries/exits or to confirm short-term trend shifts.
Indicatore Pine Script®
di d3m4h
lib_smcLibrary "lib_smc" This is an adaptation of LuxAlgo's Smart Money Concepts indicator with numerous changes. Main changes include integration of object based plotting, plenty of performance improvements, live tracking of Order Blocks, integration of volume profiles to refine Order Blocks, and many more. This is a library for developers, if you want this converted into a working strategy, let me know. buffer(item, len, force_rotate)   Parameters:      item (float)      len (int)      force_rotate (bool) buffer(item, len, force_rotate)   Parameters:      item (int)      len (int)      force_rotate (bool) buffer(item, len, force_rotate)   Parameters:      item (Profile type from robbatt/lib_profile/32)      len (int)      force_rotate (bool) swings(len)   INTERNAL: detect swing points (HH and LL) in given range   Parameters:      len (simple int) : range to check for new swing points   Returns: values are the price level where and if a new HH or LL was detected, else na method init(this)   Namespace types: OrderBlockConfig   Parameters:      this (OrderBlockConfig) method delete(this)   Namespace types: OrderBlock   Parameters:      this (OrderBlock) method clear_broken(this, broken_buffer)   INTERNAL: delete internal order blocks box coordinates if top/bottom is broken   Namespace types: map   Parameters:      this (map)      broken_buffer (map)   Returns: any_bull_ob_broken, any_bear_ob_broken, broken signals are true if an according order block was broken/mitigated, broken contains the broken block(s) create_ob(id, mode, start_t, start_i, top, end_t, end_i, bottom, break_price, early_confirmation_price, config, init_plot, force_overlay)   INTERNAL: set internal order block coordinates   Parameters:      id (int)      mode (int) : 1: bullish, -1 bearish block      start_t (int)      start_i (int)      top (float)      end_t (int)      end_i (int)      bottom (float)      break_price (float)      early_confirmation_price (float)      config (OrderBlockConfig)      init_plot (bool)      force_overlay (bool)   Returns: signals are true if an according order block was broken/mitigated method align_to_profile(block, align_edge, align_break_price)   Namespace types: OrderBlock   Parameters:      block (OrderBlock)      align_edge (bool)      align_break_price (bool) method create_profile(block, opens, tops, bottoms, closes, values, resolution, vah_pc, val_pc, args, init_calculated, init_plot, force_overlay)   Namespace types: OrderBlock   Parameters:      block (OrderBlock)      opens (array)      tops (array)      bottoms (array)      closes (array)      values (array)      resolution (int)      vah_pc (float)      val_pc (float)      args (ProfileArgs type from robbatt/lib_profile/32)      init_calculated (bool)      init_plot (bool)      force_overlay (bool) method create_profile(block, resolution, vah_pc, val_pc, args, init_calculated, init_plot, force_overlay)   Namespace types: OrderBlock   Parameters:      block (OrderBlock)      resolution (int)      vah_pc (float)      val_pc (float)      args (ProfileArgs type from robbatt/lib_profile/32)      init_calculated (bool)      init_plot (bool)      force_overlay (bool) track_obs(swing_len, hh, ll, top, btm, bull_bos_alert, bull_choch_alert, bear_bos_alert, bear_choch_alert, min_block_size, max_block_size, config_bull, config_bear, init_plot, force_overlay, enabled, extend_blocks, clear_broken_buffer_before, align_edge_to_value_area, align_break_price_to_poc, profile_args_bull, profile_args_bear, use_soft_confirm, soft_confirm_offset, use_retracements_with_FVG_out)   Parameters:      swing_len (int)      hh (float)      ll (float)      top (float)      btm (float)      bull_bos_alert (bool)      bull_choch_alert (bool)      bear_bos_alert (bool)      bear_choch_alert (bool)      min_block_size (float)      max_block_size (float)      config_bull (OrderBlockConfig)      config_bear (OrderBlockConfig)      init_plot (bool)      force_overlay (bool)      enabled (bool)      extend_blocks (simple bool)      clear_broken_buffer_before (simple bool)      align_edge_to_value_area (simple bool)      align_break_price_to_poc (simple bool)      profile_args_bull (ProfileArgs type from robbatt/lib_profile/32)      profile_args_bear (ProfileArgs type from robbatt/lib_profile/32)      use_soft_confirm (simple bool)      soft_confirm_offset (float)      use_retracements_with_FVG_out (simple bool) method draw(this, config, extend_only)   Namespace types: OrderBlock   Parameters:      this (OrderBlock)      config (OrderBlockConfig)      extend_only (bool) method draw(blocks, config)   INTERNAL: plot order blocks   Namespace types: array   Parameters:      blocks (array)      config (OrderBlockConfig) method draw(blocks, config)   INTERNAL: plot order blocks   Namespace types: map   Parameters:      blocks (map)      config (OrderBlockConfig) method cleanup(this, ob_bull, ob_bear)   removes all Profiles that are older than the latest OrderBlock from this profile buffer   Namespace types: array   Parameters:      this (array type from robbatt/lib_profile/32)      ob_bull (OrderBlock)      ob_bear (OrderBlock) _plot_swing_points(mode, x, y, show_swing_points, linecolor_swings, keep_history, show_latest_swings_levels, trail_x, trail_y, trend)   INTERNAL: plot swing points   Parameters:      mode (int) : 1: bullish, -1 bearish block      x (int) : x-coordingate of swing point to plot (bar_index)      y (float) : y-coordingate of swing point to plot (price)      show_swing_points (bool) : switch to enable/disable plotting of swing point labels      linecolor_swings (color) : color for swing point labels and lates level lines      keep_history (bool) : weater to remove older swing point labels and only keep the most recent      show_latest_swings_levels (bool)      trail_x (int) : x-coordinate for latest swing point (bar_index)      trail_y (float) : y-coordinate for latest swing point (price)      trend (int) : the current trend 1: bullish, -1: bearish, to determine Strong/Weak Low/Highs _pivot_lvl(mode, trend, hhll_x, hhll, super_hhll, filter_insignificant_internal_breaks)   INTERNAL: detect whether a structural level has been broken and if it was in trend direction (BoS) or against trend direction (ChoCh), also track the latest high and low swing points   Parameters:      mode (simple int) : detect 1: bullish, -1 bearish pivot points      trend (int) : current trend direction      hhll_x (int) : x-coordinate of newly detected hh/ll (bar_index)      hhll (float) : y-coordinate of newly detected hh/ll (price)      super_hhll (float) : level/y-coordinate of superior hhll (if this is an internal structure pivot level)      filter_insignificant_internal_breaks (bool) : if true pivot points / internal structure will be ignored where the wick in trend direction is longer than the opposite (likely to push further in direction of main trend)   Returns: coordinates of internal structure that has been broken (x,y): start of structure, (trail_x, trail_y): tracking hh/ll after structure break, (bos_alert, choch_alert): signal whether a structural level has been broken _plot_structure(x, y, is_bos, is_choch, line_color, line_style, label_style, label_size, keep_history)   INTERNAL: plot structural breaks (BoS/ChoCh)   Parameters:      x (int) : x-coordinate of newly broken structure (bar_index)      y (float) : y-coordinate of newly broken structure (price)      is_bos (bool) : whether this structural break was in trend direction      is_choch (bool) : whether this structural break was against trend direction      line_color (color) : color for the line connecting the structural level and the breaking candle      line_style (string) : style (line.style_dashed/solid) for the line connecting the structural level and the breaking candle      label_style (string) : style (label.style_label_down/up) for the label above/below the line connecting the structural level and the breaking candle      label_size (string) : size (size.small/tiny) for the label above/below the line connecting the structural level and the breaking candle      keep_history (bool) : weater to remove older swing point labels and only keep the most recent structure_values(length, super_hh, super_ll, filter_insignificant_internal_breaks)   detect (and plot) structural breaks and the resulting new trend   Parameters:      length (simple int) : lookback period for swing point detection      super_hh (float) : level/y-coordinate of superior hh (for internal structure detection)      super_ll (float) : level/y-coordinate of superior ll (for internal structure detection)      filter_insignificant_internal_breaks (bool) : if true pivot points / internal structure will be ignored where the wick in trend direction is longer than the opposite (likely to push further in direction of main trend)   Returns: trend: direction 1:bullish -1:bearish, (bull_bos_alert, bull_choch_alert, top_x, top_y, trail_up_x, trail_up): whether and which level broke in a bullish direction, trailing high, (bbear_bos_alert, bear_choch_alert, tm_x, btm_y, trail_dn_x, trail_dn): same in bearish direction structure_plot(trend, bull_bos_alert, bull_choch_alert, top_x, top_y, trail_up_x, trail_up, hh, bear_bos_alert, bear_choch_alert, btm_x, btm_y, trail_dn_x, trail_dn, ll, color_bull, color_bear, show_swing_points, show_latest_swings_levels, show_bos, show_choch, line_style, label_size, keep_history)   detect (and plot) structural breaks and the resulting new trend   Parameters:      trend (int) : crrent trend 1: bullish, -1: bearish      bull_bos_alert (bool) : if there was a bullish bos alert -> plot it      bull_choch_alert (bool) : if there was a bullish choch alert -> plot it      top_x (int) : latest shwing high x      top_y (float) : latest swing high y      trail_up_x (int) : trailing high x      trail_up (float) : trailing high y      hh (float) : if there was a higher high      bear_bos_alert (bool) : if there was a bearish bos alert -> plot it      bear_choch_alert (bool) : if there was a bearish chock alert -> plot it      btm_x (int) : latest swing low x      btm_y (float) : latest swing low y      trail_dn_x (int) : trailing low x      trail_dn (float) : trailing low y      ll (float) : if there was a lower low      color_bull (color) : color for bullish BoS/ChoCh levels      color_bear (color) : color for bearish BoS/ChoCh levels      show_swing_points (bool) : whether to plot swing point labels      show_latest_swings_levels (bool) : whether to track and plot latest swing point levels with lines      show_bos (bool) : whether to plot BoS levels      show_choch (bool) : whether to plot ChoCh levels      line_style (string) : whether to plot BoS levels      label_size (string) : label size of plotted BoS/ChoCh levels      keep_history (bool) : weater to remove older swing point labels and only keep the most recent structure(length, color_bull, color_bear, super_hh, super_ll, filter_insignificant_internal_breaks, show_swing_points, show_latest_swings_levels, show_bos, show_choch, line_style, label_size, keep_history, enabled)   detect (and plot) structural breaks and the resulting new trend   Parameters:      length (simple int) : lookback period for swing point detection      color_bull (color) : color for bullish BoS/ChoCh levels      color_bear (color) : color for bearish BoS/ChoCh levels      super_hh (float) : level/y-coordinate of superior hh (for internal structure detection)      super_ll (float) : level/y-coordinate of superior ll (for internal structure detection)      filter_insignificant_internal_breaks (bool) : if true pivot points / internal structure will be ignored where the wick in trend direction is longer than the opposite (likely to push further in direction of main trend)      show_swing_points (bool) : whether to plot swing point labels      show_latest_swings_levels (bool) : whether to track and plot latest swing point levels with lines      show_bos (bool) : whether to plot BoS levels      show_choch (bool) : whether to plot ChoCh levels      line_style (string) : whether to plot BoS levels      label_size (string) : label size of plotted BoS/ChoCh levels      keep_history (bool) : weater to remove older swing point labels and only keep the most recent      enabled (bool) _check_equal_level(mode, len, eq_threshold, enabled)   INTERNAL: detect equal levels (double top/bottom)   Parameters:      mode (int) : detect 1: bullish/high, -1 bearish/low pivot points      len (int) : lookback period for equal level (swing point) detection      eq_threshold (float) : maximum price offset for a level to be considered equal      enabled (bool)   Returns: eq_alert whether an equal level was detected and coordinates of the first and the second level/swing point _plot_equal_level(show_eq, x1, y1, x2, y2, label_txt, label_style, label_size, line_color, line_style, keep_history)   INTERNAL: plot equal levels (double top/bottom)   Parameters:      show_eq (bool) : whether to plot the level or not      x1 (int) : x-coordinate of the first level / swing point      y1 (float) : y-coordinate of the first level / swing point      x2 (int) : x-coordinate of the second level / swing point      y2 (float) : y-coordinate of the second level / swing point      label_txt (string) : text for the label above/below the line connecting the equal levels      label_style (string) : style (label.style_label_down/up) for the label above/below the line connecting the equal levels      label_size (string) : size (size.tiny) for the label above/below the line connecting the equal levels      line_color (color) : color for the line connecting the equal levels (and it's label)      line_style (string) : style (line.style_dotted) for the line connecting the equal levels      keep_history (bool) : weater to remove older swing point labels and only keep the most recent equal_levels_values(len, threshold, enabled)   detect (and plot) equal levels (double top/bottom), returns coordinates   Parameters:      len (int) : lookback period for equal level (swing point) detection      threshold (float) : maximum price offset for a level to be considered equal      enabled (bool) : whether detection is enabled   Returns: (eqh_alert, eqh_x1, eqh_y1, eqh_x2, eqh_y2) whether an equal high was detected and coordinates of the first and the second level/swing point, (eql_alert, eql_x1, eql_y1, eql_x2, eql_y2) same for equal lows equal_levels_plot(eqh_x1, eqh_y1, eqh_x2, eqh_y2, eql_x1, eql_y1, eql_x2, eql_y2, color_eqh, color_eql, show, keep_history)   detect (and plot) equal levels (double top/bottom), returns coordinates   Parameters:      eqh_x1 (int) : coordinates of first point of equal high      eqh_y1 (float) : coordinates of first point of equal high      eqh_x2 (int) : coordinates of second point of equal high      eqh_y2 (float) : coordinates of second point of equal high      eql_x1 (int) : coordinates of first point of equal low      eql_y1 (float) : coordinates of first point of equal low      eql_x2 (int) : coordinates of second point of equal low      eql_y2 (float) : coordinates of second point of equal low      color_eqh (color) : color for the line connecting the equal highs (and it's label)      color_eql (color) : color for the line connecting the equal lows (and it's label)      show (bool) : whether plotting is enabled      keep_history (bool) : weater to remove older swing point labels and only keep the most recent   Returns: (eqh_alert, eqh_x1, eqh_y1, eqh_x2, eqh_y2) whether an equal high was detected and coordinates of the first and the second level/swing point, (eql_alert, eql_x1, eql_y1, eql_x2, eql_y2) same for equal lows equal_levels(len, threshold, color_eqh, color_eql, enabled, show, keep_history)   detect (and plot) equal levels (double top/bottom)   Parameters:      len (int) : lookback period for equal level (swing point) detection      threshold (float) : maximum price offset for a level to be considered equal      color_eqh (color) : color for the line connecting the equal highs (and it's label)      color_eql (color) : color for the line connecting the equal lows (and it's label)      enabled (bool) : whether detection is enabled      show (bool) : whether plotting is enabled      keep_history (bool) : weater to remove older swing point labels and only keep the most recent   Returns: (eqh_alert) whether an equal high was detected, (eql_alert) same for equal lows _detect_fvg(mode, enabled, o, h, l, c, filter_insignificant_fvgs, change_tf)   INTERNAL: detect FVG (fair value gap)   Parameters:      mode (int) : detect 1: bullish, -1 bearish gaps      enabled (bool) : whether detection is enabled      o (float) : reference source open      h (float) : reference source high      l (float) : reference source low      c (float) : reference source close      filter_insignificant_fvgs (bool) : whether to calculate and filter small/insignificant gaps      change_tf (bool) : signal when the previous reference timeframe closed, triggers new calculation   Returns: whether a new FVG was detected and its top/mid/bottom levels _clear_broken_fvg(mode, upper_boxes, lower_boxes)   INTERNAL: clear mitigated FVGs (fair value gaps)   Parameters:      mode (int) : detect 1: bullish, -1 bearish gaps      upper_boxes (array) : array that stores the upper parts of the FVG boxes      lower_boxes (array) : array that stores the lower parts of the FVG boxes _plot_fvg(mode, show, top, mid, btm, border_color, extend_box)   INTERNAL: plot (and clear broken) FVG (fair value gap)   Parameters:      mode (int) : plot 1: bullish, -1 bearish gap      show (bool) : whether plotting is enabled      top (float) : top level of fvg      mid (float) : center level of fvg      btm (float) : bottom level of fvg      border_color (color) : color for the FVG box      extend_box (int) : how many bars into the future the FVG box should be extended after detection fvgs_values(o, h, l, c, filter_insignificant_fvgs, change_tf, enabled)   detect (and plot / clear broken) FVGs (fair value gaps), and return alerts and level values   Parameters:      o (float) : reference source open      h (float) : reference source high      l (float) : reference source low      c (float) : reference source close      filter_insignificant_fvgs (bool) : whether to calculate and filter small/insignificant gaps      change_tf (bool) : signal when the previous reference timeframe closed, triggers new calculation      enabled (bool) : whether detection is enabled   Returns: (bullish_fvg_alert, bull_top, bull_mid, bull_btm): whether a new bullish FVG was detected and its top/mid/bottom levels, (bearish_fvg_alert, bear_top, bear_mid, bear_btm): same for bearish FVGs fvgs_plot(bullish_fvg_alert, bull_top, bull_mid, bull_btm, bearish_fvg_alert, bear_top, bear_mid, bear_btm, color_bull, color_bear, extend_box, show)   Parameters:      bullish_fvg_alert (bool)      bull_top (float)      bull_mid (float)      bull_btm (float)      bearish_fvg_alert (bool)      bear_top (float)      bear_mid (float)      bear_btm (float)      color_bull (color) : color for bullish FVG boxes      color_bear (color) : color for bearish FVG boxes      extend_box (int) : how many bars into the future the FVG box should be extended after detection      show (bool) : whether plotting is enabled   Returns: (bullish_fvg_alert, bull_top, bull_mid, bull_btm): whether a new bullish FVG was detected and its top/mid/bottom levels, (bearish_fvg_alert, bear_top, bear_mid, bear_btm): same for bearish FVGs fvgs(o, h, l, c, filter_insignificant_fvgs, change_tf, color_bull, color_bear, extend_box, enabled, show)   detect (and plot / clear broken) FVGs (fair value gaps)   Parameters:      o (float) : reference source open      h (float) : reference source high      l (float) : reference source low      c (float) : reference source close      filter_insignificant_fvgs (bool) : whether to calculate and filter small/insignificant gaps      change_tf (bool) : signal when the previous reference timeframe closed, triggers new calculation      color_bull (color) : color for bullish FVG boxes      color_bear (color) : color for bearish FVG boxes      extend_box (int) : how many bars into the future the FVG box should be extended after detection      enabled (bool) : whether detection is enabled      show (bool) : whether plotting is enabled   Returns: (bullish_fvg_alert): whether a new bullish FVG was detected, (bearish_fvg_alert): same for bearish FVGs OrderBlock   Fields:      id (series int)      dir (series int)      left_top (chart.point)      right_bottom (chart.point)      break_price (series float)      early_confirmation_price (series float)      ltf_high (array)      ltf_low (array)      ltf_volume (array)      plot (Box type from robbatt/lib_plot_objects/49)      profile (Profile type from robbatt/lib_profile/32)      trailing (series bool)      extending (series bool)      awaiting_confirmation (series bool)      touched_break_price_before_confirmation (series bool)      soft_confirmed (series bool)      has_fvg_out (series bool)      hidden (series bool)      broken (series bool) OrderBlockConfig   Fields:      show (series bool)      show_last (series int)      show_id (series bool)      show_profile (series bool)      args (BoxArgs type from robbatt/lib_plot_objects/49)      txt (series string)      txt_args (BoxTextArgs type from robbatt/lib_plot_objects/49)      delete_when_broken (series bool)      broken_args (BoxArgs type from robbatt/lib_plot_objects/49)      broken_txt (series string)      broken_txt_args (BoxTextArgs type from robbatt/lib_plot_objects/49)      broken_profile_args (ProfileArgs type from robbatt/lib_profile/32)      use_profile (series bool)      profile_args (ProfileArgs type from robbatt/lib_profile/32)
Libreria Pine Script®
di robbatt
15
Fair Value Gap [UkutaLabs]█ OVERVIEW Fair Value Gaps are price jumps caused by the imbalance buying and selling pressures in trading and are most commonly used amongst price action traders. Fair Value Gaps are formed via a three-candle sequence in which a large candle’s neighbouring candles’ upper and lower wicks do not fully overlap the large candle. The Fair Value Gaps Indicator also supports Multi Time Frame Plotting, allowing you to plot the Fair Value Gaps from higher time frames onto lower time frame charts. The Fair Value Gaps Indicator is a powerful trading toolkit that provides users with more information than they would typically have available to them by allowing them to configure several charts worth of information onto one single chart. █ USAGE The script automatically identifies imbalances between buying and selling pressure in the market in real time, offering traders valuable insight into current market sentiment. These gaps are considered to be levels where the supply and demand of a commodity are imbalanced, and the price tends to return to fill these gaps (But are not guaranteed to). The Fair Value Gaps Indicator also allows gaps from higher time frames to be drawn on lower time frame charts, providing traders with more information than they would typically have access to to further simplify the decision making process. █ SETTINGS Configuration • Show Labels: Determines whether labels that identify which time frame a FVG is calculated from. • Max FVG Display: Determines the limit to the number of FVGs that can be drawn from all time frames. Set this value to 0 to remove this limit. Current Time Frame • Display: Determines whether or not FVGs from the current time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the current time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the current time frame. 5 Minute (Higher Time Frame) • Display: Determines whether or not FVGs from the 5 minute time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the 5 minute time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the 5 minute time frame. 15 Minute (Higher Time Frame) • Display: Determines whether or not FVGs from the 15 minute time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the 15 minute time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the 15 minute time frame. 30 Minute (Higher Time Frame) • Display: Determines whether or not FVGs from the 30 minute time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the 30 minute time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the 30 minute time frame. 60 Minute (Higher Time Frame) • Display: Determines whether or not FVGs from the 60 minute time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the 60 minute time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the 60 minute time frame. 240 Minute (Higher Time Frame) • Display: Determines whether or not FVGs from the 240 minute time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the 240 minute time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the 240 minute time frame. Daily (Higher Time Frame) • Display: Determines whether or not FVGs from the daily time frame will be drawn on the chart. • Bullish Color: Determines the color of Bullish FVGs calculated from the daily time frame. • Bearish Color: Determines the color of Bearish FVGs calculated from the daily time frame.
Indicatore Pine Script®
di UkutaLabs
ICT Silver Bullet with signals The "ICT Silver Bullet with signals" indicator (inspired from the lectures of "The Inner Circle Trader" (ICT)), goes a step further than the ICT Silver Bullet publication, which I made for LuxAlgo : • uses HTF candles • instant drawing of Support & Resistance (S/R) lines when price retraces into FVG • NWOG - NDOG S/R lines • signals The Silver Bullet (SB) window which is a specific 1-hour interval where a Fair Value Gap (FVG) pattern can be formed. When price goes back to the FVG, without breaking it, Support & Resistance lines will be drawn immediately. There are 3 different Silver Bullet windows (New York local time): The London Open Silver Bullet (03 AM — 04 AM ~ 03:00 — 04:00) The   AM  Session Silver Bullet (10 AM — 11 AM ~ 10:00 — 11:00) The   PM  Session Silver Bullet (02 PM — 03 PM ~ 14:00 — 15:00) 🔶 USAGE This technique can visualise potential support/resistance lines, which can be used as targets. The script contains 2 main components: • forming of a Fair Value Gap (FVG) • drawing support/resistance (S/R) lines 🔹 Forming of FVG When HTF candles forms an FVG, the FVG will be drawn at the end (close) of the last HTF candle. To make it easier to visualise the 2 HTF candles that form the FVG, you can enable • SHOW -> HTF candles During the SB session, when a FVG is broken, the FVG will be removed, together with its S/R lines. The same goes if price did not retrace into FVG at the last bar of the SB session Only exception is when "Remove broken FVG's" is disabled. In this case a FVG can be broken, as long as price bounces back before the end of the SB session, it will remain to be visible: 🔹 Drawing support/resistance lines S/R target lines are drawn immediately when price retraces into the FVG. They will remain updated until they are broken (target hit) Potential S/R lines are formed by: • previous swings (swing settings (left-right) • New Week Opening Gap (NWOG): close on Friday       -  weekly open • New  Day   Opening Gap (NWOG): close previous day -  current daily open Only non-broken lines are included. Broken = • minimum  of open and close below potential S/R line • maximum of open and close above potential S/R line NDOG lines are coloured fuchsia (as in the ICT lectures), NWOG are coloured white (darkmode) or black (lightmode ~ ICT lectures) Swing line colour can be set as desired. Here S/R includes NDOG lines: The same situation, with "Extend Target-lines to their source" enabled: Here with NWOG lines: This publication contains a "Minimum Trade Framework (mTFW)", which represents the best-case expected price delivery, this is not your actual trade entry - exit range. • 40 ticks for index futures or indices • 15 pips for Forex pairs The minimum distance (if applicable) can be shown by enabling "Show" - "Minimum Trade Framework" -> blue arrow from close to mTFW Potential S/R lines needs to be higher (bullish) or lower (bearish) than mTFW. 🔶 SETTINGS (check USAGE for deeper insights and explanation) 🔹 Only last x bars: when enabled, the script will do most of the calculations at these last x candles, potentially this can speeds calculations. 🔹 Swing settings (left-right): Sets the length, which will set the lookback period/sensitivity of the ZigZag patterns (which directs the trend and points for S/R lines) 🔹 FVG HTF (minutes): 1-15 minutes. • When the chart TF is equal of higher, calculations are based on current TF. • Chart TF > 15 minutes will give the warning: "Please use a timeframe <= 15 minutes". Remove broken FVG's: when enabled the script will remove FVG (+ associated S/R lines) immediately when FVG is broken at opposite direction. FVG's still will be automatically removed at the end of the SB session, when there is no retrace, together with associated S/R lines,... ~ trend: Only include FVG in the same direction as the current trend Note -> when set 'right' (swing setting) rather high ( > 3), he trend change will be delayed as well (default 'right' max 5) Extend: extend FVG to max right side of SB session 🔹 Targets – support/resistance Extend Target-lines to their source: extend lines to their origin Colours (Swing S/R lines) 🔹 Show SB session: show lines and labels of SB session (+ colour) • Labels can be disabled separately in the 'Style' section, colour is set at the 'Inputs' section Trend : Show trend (ZigZag, coloured ~ trend) HTF candles: Show the 2 HTF candles that form the FVG Minimum Trade Framework: blue arrow (if applicable) 🔶 ALERTS There are 4 signals provided (bullish/bearish): FVG Formed FVG Retrace Target reached FVG cancelled You can choose between dynamic alerts - only 1 alert needs to be set for all signals, or you can set specific alerts as desired. 💜 PURPLE BARS 😈 • Since TradingView has chosen to give away our precious Purple coloured Wizard Badge, bars are coloured purple 😊😉
Indicatore Pine Script®
di fikira
18
[GetSparx] Lacuna Pro⚡ Lacuna Pro – Institutional Liquidity Framework This indicator is a premium Smart Money Concepts (SMC) trading toolkit designed to help traders identify high-probability entry and exit zones by visualizing real-time market inefficiencies. It combines Fair Value Gaps (FVGs), Break of Structure (BOS), Change of Character (CHoCH), and Supply & Demand Zones into a unified, configurable framework. Unlike many public indicators that simply "overlay concepts", this indicator implements strict internal validation to filter out noise and provide only institutional-grade levels — making it a valuable execution layer for SMC-based strategies. 🧠 What the Script Does – and Why the Combination Matters This is more than just a combination of known SMC tools — it's a complete workflow assistant: -FVGs highlight where liquidity is likely resting due to institutional imbalance. -BOS & CHoCH define structural context: whether the market is trending or shifting. -Supply & Demand Zones show where institutions are likely to react. -Each component works together to create a layered confluence system: -FVG inside a Demand Zone after a Bullish CHoCH → High-probability Long Setup -Bearish BOS into a Supply Zone + fresh Bearish FVG → High-probability Short Setup 📘 Core Concepts Explained Fair Value Gap (FVG) FVGs occur when price moves with strong momentum and leaves a gap between candles — suggesting inefficiency. Bullish FVGs lie below price; bearish ones above. Price often returns to these levels before continuing. An FVG is detected when a three-candle sequence reveals a price imbalance: - Bullish : Candle 2’s low is higher than Candle 1’s high - Bearish : Candle 2’s high is lower than Candle 1’s low These setups indicate a sudden burst of institutional momentum, often causing price to revisit the gap for rebalancing. Break of Structure (BOS) A BOS signals trend continuation when price breaks the previous swing high or low in the direction of the current trend. The script uses a 3-bar pivot system to detect local swing highs and lows — a swing high forms when the highest candle is flanked by two lower highs on each side (and vice versa for swing lows). A BOS is confirmed when price closes beyond the most recent swing point in alignment with the current trend direction. Change of Character (CHoCH) A CHoCH signals a potential trend reversal by breaking a structure level in the opposite direction of the prevailing trend. It is detected when price breaks the most recent opposing swing and simultaneously flips the internal trend state. CHoCH events always take precedence over BOS to avoid conflicting signals. The internal trend engine ensures that these structural shifts are valid and not caused by random volatility. Supply & Demand Zones These zones mark institutional interest and are formed using precise price action rules — not arbitrary support/resistance. A valid zone begins when a small-bodied base candle (such as a star or doji) appears at a local swing point. This candle must be followed by a strong impulse candle — either a bullish engulfing (for demand) or bearish breakout (for supply). - Demand Zone : From the base candle's low to the impulse candle's high - Supply Zone : From the base candle's high to the impulse candle's low These zones represent likely institutional entries or exits, often acting as magnets or rejection areas. Once price decisively breaks through a zone, it is automatically removed — keeping the chart clean and relevant. Zone Detection Logic – When a Zone Is Drawn or Skipped Below are the precise rules used to determine whether a Supply or Demand Zone is valid and shown on the chart A Supply or Demand Zone is only drawn if all of the following conditions are met: -A small-bodied base candle forms at a local high or low (body size below threshold) -The base candle is followed by a strong impulse candle (engulfing or breakout) -The impulse direction matches the expected context (e.g., bearish impulse from swing high = Supply) -The candle wicks do not invalidate the structure (e.g., no long opposing wick that retraces the move) -The zone meets the minimum size threshold based on % or ATR filter If any of these criteria are not satisfied, the zone is skipped to avoid false or weak levels. This ensures only clean, institutional-grade Supply & Demand Zones are shown on the chart. (e.g. small-bodied star + bullish engulfing at swing low = Demand Zone, or bearish breakout at swing high = Supply Zone). 🔍 Core Functionality & Original Features 1. 📉 Fair Value Gaps (FVGs) – Dynamic, Validated, and Clean Unlike scripts that draw every gap, this script applies strict quality control to ensure only meaningful FVGs appear: Minimum Threshold Filtering Filters out small or noisy gaps by requiring each FVG to exceed a % or ATR-based size threshold. Prevents micro-gap clutter on lower timeframes. Momentum Candle Verification Requires a strong middle candle (candle 2) between two extremes. Large opposing wicks invalidate the setup. Partial Fill Adjustment When price partially fills a gap, the FVG box automatically shrinks to show only the remaining imbalance. If fully filled, the box is removed. Multi-Timeframe Overlays View institutional gaps from 15m, 1H, 4H, or Daily overlaid onto any chart for top-down analysis and entry refinement. 2. 🧱 Structural Shifts – BOS & CHoCH Structural logic is built around pivot detection with real-time trend state awareness: Pivot Logic (Customizable Strength) Local highs/lows are detected using pivot length (default: 3 bars left/right). Breaks are only confirmed if they align with the internal trend state. BOS = Continuation Breaks a swing in trend direction (e.g., HL → HH → BOS at previous HH) CHoCH = Reversal Breaks a structure against trend (e.g., HH → HL → break of HL = Bearish CHoCH) Conflict Resolution If both BOS and CHoCH could trigger, CHoCH takes priority. This avoids false positives and ensures a single, clear structure signal per swing. Styling & Visibility All structure lines and labels are customizable — colors, line style (solid/dashed), and which signals to display (BOS/CHoCH/both). 3. 🧠 Supply & Demand Zones – Smart Detection & Maintenance These zones are generated using strict price action logic, not arbitrary support/resistance lines: -Formation Conditions -Small-bodied "base candle" at a local high/low -Followed by an impulse candle (bullish/bearish engulfing or breakout) -Zone Bounds - Demand : From base candle low to impulse high - Supply : From base candle high to impulse low Automatic Cleanup Once price decisively pierces a zone, it’s automatically removed from the chart. This keeps the display relevant and clutter-free. Multi-Timeframe Zones Toggle zones from your current timeframe or overlay from 1H, 4H, and Daily — ideal for confluence stacking. Zone Compression Filtering Optional compression % ensures overlapping zones are combined logically to reduce redundancy. 🧩 How It Works Together – Practical Usage Flow This indicator is designed to follow a structured workflow used by institutional-style traders: Trend Structure Identify trend using BOS and CHoCH on your timeframe. Liquidity Zones Look for supply/demand zones aligning with the structural bias. Execution Areas Wait for an unfilled FVG in confluence with the above conditions. 📸 Screenshot Captions Screenshot 1: CHoCH + Demand Zone + Bullish FVG 📌 Reversal Setup with Confluence A Bullish CHoCH confirms a structural shift. Price enters a Demand Zone and reacts from an unfilled Bullish FVG, creating a high-probability long opportunity. Screenshot 2: Bearish BOS + FVG Fill 📌 Trend Continuation Confirmation Price breaks a swing low, triggering a Bearish BOS. A Bearish FVG forms and price returns to fill it before continuing lower — validating the trend and the gap. Screenshot 3: Multi-Timeframe Overlay (FVGs from 1H and 4H) 📌 Top-Down Liquidity Mapping Overlaid 1H and 4H FVGs provide institutional-level insight on lower timeframes. Combined with structure signals, this supports precise entry alignment across timeframes. As price partially fills a bullish gap, the FVG box auto-adjusts to show only the remaining imbalance. Fully filled zones are automatically removed, keeping the chart clean. Screenshot 4: Supply Zone Rejection 📌 Institutional Supply in Action Price enters a Supply Zone formed from a base candle + bearish impulse. A sharp rejection confirms active sell-side interest at this level. Zone opgevuld box verdwijnt Screenshot 5: Bullish BOS + Internal Trend Logic 📌 Trend Continuation with Structure Awareness A Higher Low forms, followed by a Higher High, triggering a Bullish BOS. The internal trend engine confirms direction and filters false reversals. Screenshot 6: Zone Compression Logic 📌 Smart Zone Consolidation Closely overlapping supply zones are merged using compression logic to prevent clutter. Only the strongest institutional levels remain visible. ⚙ Full Customization Panel You can configure: -FVG display per timeframe + color scheme -BOS/CHoCH styling, label text, and detection toggles -Zone settings: visibility, compression %, length -Auto-cleanup behavior for FVGs and zones 🔐 Why Invite-Only? This indicator contains original logic not available in public indicators, including: -Momentum-candle verified FVGs -Real-time partial fill trimming -Auto-removal of invalidated structure/zones -Conflict-aware BOS/CHoCH logic -Multi-timeframe overlays with internal state tracking -Proprietary compression-based zone filtering This script is part of a private paid offering. It is not based on reused or repackaged educational code. The logic and structure management are exclusive to this implementation. ⚠ Disclaimer This tool is for educational and analytical use only. It does not provide financial advice or trading signals. Always use proper risk management and do your own due diligence.
Indicatore Pine Script®
di GetSparx
Plyo Tap'n'Slap (TnS) by OutOfOptionsThe Model This Strategy/Model takes advantage of the strongest trend signature in the market, which is also the most basic move in the market. This basic move is what most traders consider to be a staircase, or trendline. ICT traders call this setup a “unicorn” which is just another word for when an Order block overlaps with an FVG. The beauty of this model is that you don't need to know what ANY of these things are. The entry comes when a candles High or Low overlaps with a FVG that is at least 3 points away from both edges of the FVG. If the candle is too close to the edge then the setups is invalid (see rules for more). TO find a candle that overlaps with the FVG it also can not cut through any other price action, for example, A potential entry cant cut through another wick to make it overlap with the FVG. (see rules for more) TnS gets its TP by analyzing what is called the "OG TP" The OG TP is determined by looking for the first tapped into the FVG, then looking for an immediate High or Low to the left of the candle that first tapped the FVG. IF there is no immediate High or low next to the candle that first tapped the FVG, then target the candle itself (see rules for more). IF the "OG TP" has already been hit before TnS gets its entry, then look to the left of the TnS entry candle for the immediate High or Low next to it. If there is no immediate High or Low next to the TnS Entry candle, then target the Entry candles, High or Low (see rules for more) Model Rules Overlapping H/L MUST be at least 3 points away from both edges of the FVG, Overlapping H/L cannot cut through PA to make it overlap with the FVG, Entries can only be the highest overlapping high or the lowest overlapping low, If TnS Has already played out within the FVG then it should no longer be used, If the FVGs OG TP has already been hit then use the TnS entry to re-align for your target, No using NWOGs/NDOGs for setups. A NWOG is NOT the same thing as an FVG so this example V2 Rules If its a Bullish FVG then you need a bearish candle H/L that overlaps for your entry If its a Bearish FVG then you need a bullish candle H/L that overlaps for your entry Indicator Functionality The indicator uses specific logic to identify FVGs that match the requirements of the TnS model, ensuring at least one valid entry exists per the default V1 rules of the model, or the stricter V2 rules if configured via settings. If entries (up to 2 per model rules) are identified, the FVG is highlighted, and each entry and its stop loss is marked with a line. The line styles, colors, and FVG color, which can vary depending on whether the entry is bullish or bearish, are configurable via settings. Once the FVG is tapped into, the indicator will highlight the take profit spot and list all applicable entries, stop losses, and take profits in a table, the position and presence of which can be controlled within the indicator settings. When price action hits either stop loss or take profit, all elements are removed from the chart to avoid clutter. Additionally, the indicator allows filtering of entries based on Risk/Reward (R:R), filtering out entries where take profit is less than the model stop loss and entries for which the stop loss resides inside the FVG itself. To help visualize setups where the FVG is outside the current visual range, the indicator has options to extend the FVG box and lines by a configurable number of bars. Once the FVG is tapped, the indicator will automatically extend lines/FVG box to the bar that tapped the FVG plus the configured number of bars.
Indicatore Pine Script®
di outofoptions
3
IMGPro - V1.0IMG PRO uses nine sequential stages to analyse price action and alert users to potential Trade Setups using various Price Action Concepts as detailed below: 1. Identify Higher Timeframe Market Structure and Points of Interest (HTF-POIs) 2. Calculate position size based on your risk appetite, fees and account leverage and customisable maximum trade risk 3. Verify price is in a premium or discount 4. Determine Lower Timeframe Market Structure Break Type 5. Apply Early Warning Systems if enabled 6. Alert you to risk managed trade setups at enabled HTF-POIs 7. Alert you to unentered trade invalidations 8. Alert you to trade exits based on your set criteria 9. Provide Additional Alerts such as Higher Timeframe SFPs and Market Structure Breaks that act as potential early warnings that a trade setup may be forming 1. HTF POIs Available with IMG PRO: a. HTF Market Structure Range Highs and Lows b. HTF Order Blocks c. HTF Order Blocks & FVG Overlaps d. HTF Breakers e. HTF Breakers & FVG Overlaps f. HTF FVGs g. Internal Liquidity Levels These levels are used for Trade Signals based on user settings applied. Details provided in the trade setup section below a. Higher Timeframe Market Structure Range High and Low through Multiple Timeframe Analysis: Market Structure can be defined using several techniques. The IMG indicators employ the Close through High/Low technique, which necessitates a candle to close through a structural level to validate a structural break and designate a new range. Example: H12 Market Structure visualisation on a H12 Chart with annotations: By selecting a particular Market Structure timeframe in the settings, the indicator immediately illustrates both current and historical market structures for the chosen timeframe across all subordinate timeframes, subject to the limitations of your Tradingview subscription. Example: H12 Market Structure visualisation on a H1 Chart with annotations: b. Higher Timeframe Order Blocks An Order Block represents the last candle of the opposite direction preceding a Market Structure Break. For instance, a bullish Order Block is identified as the final bearish candle leading to a bullish market structure break, and vice versa for bearish Order Blocks. Example: H12 OB visualisation on a H12 Chart with annotations: When activated, the indicator will highlight the Higher Timeframe Order Blocks responsible for a Market Structure Break on all subordinate timeframes relative to the chosen Market Structure Timeframe. Note: if multiple OBs exist, the indicator will display the OB closest to the new range extreme Example: H12 OB visualisation on a H1 Chart with annotations: c. HTF Order Blocks & HTF FVG Overlaps When enabled, the IMG Pro will only display overlaps of Order Blocks and FVGs. These are strong points of interest to look for trade setups Example of the indicator displaying a Higher Timeframe’s (HTF) OBs + FVGs on a Lower Timeframe (LTF) chart: The upper chart labelled H12/H12 is the indicator displaying H12 Structure and OB+FVGs on a H12 chart. The lower chart labelled H12/H1 is the indicator displaying H12 OB+FVGs on a H1 chart: d. Higher Timeframe Breakers A Breaker Block is identified as the most recent Order Block that has been breached by price, leading to an opposite Market Structure Break. For example, a bullish Breaker Block is the last bearish Order Block that price has passed through, confirming a bullish structural break, and the inverse is true for bearish Breakers. Example: H12 Breaker visualisation on a H12 Chart with annotations: Once enabled, the system will display Higher Timeframe Breaker Blocks after an opposite Market Structure Break is confirmed on all subordinate timeframes. Example: H12 Breaker visualisation on a H1 Chart with annotations: e. HTF Breakers & HTF FVG Overlaps When enabled, the IMG Pro will only display overlaps of Breakers and FVGs. These are strong points of interest to look for trade setups Example: The upper chart labelled H12/H12 is the indicator displaying H12 Structure and Breakers+FVGs on a H12 chart The lower chart labelled H12/H1 is the indicator displaying H12 Breakers+FVGs on a H1 chart f. Higher Timeframe Fair Value Gaps (FVGs) A Fair Value Gap is a concept used by price action traders to identify market inefficiencies, where buying and selling are not balanced. It appears on a chart as a triple-candle pattern, with a large candle flanked by two others whose highs and lows do not overlap with the large candle, creating a gap. This gap often attracts the price towards it before the market resumes its previous direction. Example of the indicator displaying a Higher Timeframe’s FVGs on a Lower Timeframe (LTF) chart: -The upper chart labelled H12/H12 is the indicator displaying H12 Structure and FVGs on a H12 chart. -The lower chart labelled H12/H1 is the indicator displaying H12 FVGs on a H1 chart g. HTF Internal Liquidity Levels (FVGs) A HTF Liquidity Level is a Higher Timeframe three bar Pivot that forms inside an active range. When enabled, the system will display all UNTESTED HTF pivots formed within an active range. Lines will stop extending once they are either tested or HTF Market Structure Breaks Example: H12 Liquidity Levels on a H1 Chart: 2. Risk Management and Position Sizing: a. Automated Position Sizing: The System will automatically calculate position size based on the account size, max leverage and risk appetite (capital risk per trade) details input in settings. Calculated trade details are included in the Tradingview Alerts as well as interactive labels on the charts. Details include but are not limited to: Trade Timeframe Side: Long/Short Type: Limit/Market Position Size in $ and Units Lot sizes if applicable Trade Risk % Take Profit Level Entry Price Stoploss Price b. Maximum Trade Risk: IMG PRO has the ability to invalidate potential trade entries if it exceeds your maximum Trade Risk threshold. Trade Risk is the % price difference between entry and stoploss. When an invalid signal is generated, the signal will not be shaded and the interactive label will display the reason for invalidation In the example below, Max Trade Risk is set to 2% , but the trade signal had a trade risk of 5.11% invalidating the signal with a grey triangle 3. Verify Premium / Discount: The system can be setup to only display signals that are in the top or bottom n% of the Market Structure Range A value of 0 (default) will disable the premium/discount system and utilize the entire range for all signal types (bullish and bearish) EXAMPLES: A value of 50% will only display bullish signals that have, at minimum, tagged the bottom half of the range and vice versa for bearish signals. A value of 25% will only display bullish signals that have tagged the bottom quarter of the range and vice versa. A value of 38.2% will display signals that tag the top and bottom 38.2% of the range (equivalent of the 61.8% OTE. retracement) Etc. 4. Determine Lower Timeframe Market Structure Break Type IMG Pro has two options for Lower Timeframe Structure Breaks: Market Structure Breaks: When selected, the system will use the first opposite pivot (in the current chart timeframe) to the left of a confirmed SFP to calculate a break in market structure when price closes through it: Market Structure Shifts: When selected, the system will use the first opposite pivot (in the current chart timeframe) to the left OR right of a confirmed SFP to calculate a break in market structure when price closes through it. MSS’ are more sensitive and may provide more false signals but are useful when there are big spike liquidity runs: 5. Apply Early Warning Systems if enabled: The IMG Pro indicator has an early warning system that will generate a potential setup alert before a HTF SFP is confirmed There are two types of early warnings: LTF Structure Break Early Warning: If enabled, the system will generate a potential setup alert if price cuts through a HTF level (Range Extreme / Internal Liquidity) and prints an opposite LTF MSB back through that level. This is a more aggressive approach where the system does not wait for the HTF SFP to be confirmed. Example: In the screenshot below, the system did not wait for a H12 SFP to be confirmed, allowing it to signal an entry that would have otherwise been missed if the LTF Structure Break early warning system was not enabled LTF FVG Early Warning: If enabled, the system will generate a potential setup alert if price cuts through a HTF level (Range Extreme / Internal Liquidity) and prints an opposite LTF FVG back through that level. No LTF MSB is required and a limit order at the FVG is signalled. This is a more aggressive approach where the system does not wait for the HTF SFP to be confirmed. Example: In the screenshot below, the system did not wait for a H12 SFP to be confirmed, signalling an entry as soon as an opposite LTF FVG is confirmed pushing price back through the HTF Liquidity Levels 6. Trade Setup Types Available with IMG PRO: The system will alert you to potential trade setups at these HTF POIs: . a. Higher Timeframe (HTF) Swing Failure followed by a Lower Timeframe (LTF) MSB at Range Extremes b. Higher Timeframe (HTF) Swing Failure followed by a Lower Timeframe (LTF) MSB at enabled HTF POIs c. Higher Timeframe (HTF) Swing Failure followed by a Lower Timeframe (LTF) MSB at All Internal Liquidity Levels (With Trend and Counter Trend) d. Higher Timeframe (HTF) Swing Failure followed by a Lower Timeframe (LTF) MSB at All Internal Liquidity Levels (With Trend ONLY) e. Lower Timeframe (LTF) Swing Failure followed by a Lower Timeframe (LTF) MSB at enabled HTF POIs f. Multiple LTF Entry Options once a signal is confirmed a. HTF Swing Failure followed by a LTF MSB at Range Extremes A Swing Failure Pattern (SFP) is a technical analysis concept used in trading to identify potential reversals in price trends. It occurs when the price attempts to surpass a previous high or low but fails to sustain that level, indicating a possible change in market direction. There are multiple methods to define a SFP but this indicator uses the failure to close through a Key Level. When confirmed, HTF SFPs will be displayed on-screen and an alert will fire if enabled. Example: EURUSD H12 Trade Setup Alerts at Range Extremes on a H1 Chart: Alerts to Enter at Lower Timeframe MSBs When enabled, a potential trade setup label and alert will generate when a HTF SFP is confirmed at a Range Extreme followed by a Chart Timeframe (Lower Timeframe) Market Structure Break (MSB). These signals are agnostic to current Market Structure bias and will generate at both extremes. b. HTF Swing Failure followed by a LTF MSB at HTF POIs: When enabled, a trade setup label and alert will generate when a HTF SFP is confirmed at an enabled Higher Timeframe POI (Order Blocks / Breakers / FVGs) followed by a Chart Timeframe (Lower Timeframe) Market Structure Break (MSB). These signals are always in line current Market Structure bias. Example: H12 SFPs and Trade Setups at HTF POIs with Fluid Exits on a H1 Chart: c. HTF Swing Failure followed by a LTF MSB at All Internal Liquidity Levels ( With Trend and Counter Trend ): When enabled, a trade setup label and alert will generate when a HTF SFP is confirmed at an Internal Liquidity Level followed by a LTF Market Structure Break (MSB) or Market Structure Shift(MSS). These signals are agnostic to HTF Market Structure bias and will alert to setups with and counter trend. Example: d. HTF Swing Failure followed by a LTF MSB at All Internal Liquidity Levels ( With Trend ONLY ) Same as (c), but will only signal trades that are in line with higher timeframe structure. I.e If HTF Structure is bullish, then only bullish trades will be signalled. e. LTF Swing Failure followed by a LTF MSB at enabled HTF POIs The system will alert you to a lower timeframe setup if these conditions are met inside enabled HTF POIs (OBs / Breakers / FVGs): - LTF SFP - LTF MSB Example: f. LTF Entry Options: IMG PRO provides the following options for LTF Entries: i. Limit Entry at MSB Level ii. Limit Entry at Breaker iii. Limit Entry at Raid Candle iv. Limit Entry at OTE 70.5% Retracement v. Market Entries (where applicable) Trade entry alerts will detail limit entry prices based on the option selected here. 7. Unentered Trade Invalidations: IMG Pro can invalidate unentered signals based on these custom criteria: a. Opposite HTF SFP Before Entry b. TP Hit Before Entry c. Confirmed Opposite Signal Before Entry If enabled and criteria met, the system will alert you to cancel any limit orders for the trade that is being invalidated. 8. Trade Exit Types Available with IMG PRO: The system provides the following options for trade exit alerts: a. Exit at Fixed R:R b. Exit at a confirmed Opposite Signal (Fluid Exits) c. Exit at enabled and untested HTF POIs d. Exit on an opposite HTF SFP at a liquidity level Example: H12 SFPs and Potential Trade Setups at Internal Liquidity Levels with Exit at closest untested HTF POI on a H1 Chart: 9. IMG PRO Alerts Overview The system provides notifications of: a. Confirmed HTF Market Structure Breaks b. Confirmed HTF SFPs at Range Extremes c. Confirmed HTF SFPs at HTF POIs d. Confirmed HTF SFPs at Liquidity Levels e. Potential Trade Setups at Range Extremes f. Potential Trade Setups at HTF Points of Interest g. Potential Trade Setups at HTF Liquidity Levels h. LTF SFPs inside HTF POIs i. Potential LTF Setups at HTF POIs j. All Exit Types including Stoplosses k. All Trade Invalidations To enable alerts, right-click on the indicator and select “Add Alert on IMG ...”. You may customise the alert name as desired and then click 'Create' to finalise the alert setup. General Note: There is no system, indicator, algorithm, or strategy that can provide absolute certainty in predicting market movements. Use trading indicators as a tool to assist with trading decisions; manage your risk wisely. Stay safe and Happy Trading!
Indicatore Pine Script®
di IMGPro
6
Rapid ICT Suite - MTF Concepts & iFVGTitle: Rapid ICT Suite - MTF Concepts & iFVG Overview Unlock a new level of market analysis with the Rapid ICT Suite, a comprehensive, all-in-one indicator designed for the discerning price action trader. This powerful tool merges two distinct analytical engines into one seamless experience, allowing you to overlay critical Higher Timeframe (HTF) market structure onto your current chart while simultaneously tracking real-time Fair Value Gaps (FVGs) and their inversions (iFVGs). Whether you are a scalper needing to respect 1H structure, a day trader aligning with the 4H bias, or a swing trader mapping the daily trend, this indicator provides the clarity and context you need to make higher-probability trading decisions. It was built from the ground up to solve common issues traders face, delivering stable, precise, and flexible analysis. The Strategy: Targeting IRL with iFVG Entries The Destination (The "Why"): Internal Range Liquidity (IRL) On a Higher Timeframe (HTF), we will identify major Internal Range Liquidity (IRL) zones. In the context of ICT, IRL simply refers to unmitigated Fair Value Gaps (FVGs) that exist within a broader trading range. These HTF FVGs act as powerful magnets for price. The market will often seek out these zones to rebalance before continuing its next major move. By plotting these on our chart, we establish a clear directional bias and a high-probability target. Our indicator will now label these HTF FVG boxes as "IRL". The Entry Signal (The "How"): Inverted Fair Value Gaps (iFVG) Once we have our HTF IRL target, we drop down to our Lower Timeframe (LTF) for execution. We wait for price to create an Inverted Fair Value Gap (iFVG). An iFVG is a regular FVG that has failed and been traded through, signifying a shift in momentum. An iFVG appearing on the LTF provides a high-precision entry signal to take a trade in the direction of the HTF IRL zone. It's our confirmation that the market is likely now making its move towards that destination. Key Features Multi-Timeframe Order Blocks (Boxes): Automatically identify and plot key HTF demand and supply zones (Order Blocks) onto your chart. Multi-Timeframe Fair Value Gaps (Boxes): See where HTF imbalances exist, giving you a clear map of institutional reference points and potential targets. Multi-Timeframe Liquidity Pools (Boxes): Pinpoint where buy-side and sell-side liquidity is likely resting, based on clusters of old highs and lows. Current Timeframe FVG & iFVG (Lines/Labels): A second, independent engine tracks FVGs on your chosen timeframe, monitors them for mitigation, and automatically identifies when an FVG has been inverted (iFVG), a crucial shift in market dynamics. The "Rapid" Advantage: Solving Trader Frustrations This indicator was engineered to overcome three of the most common problems with technical indicators: 1. ✅ No More Flickering or "Ghost" Signals The Problem: Many indicators show signals on the live, forming candle. This causes zones or signals to appear and disappear ("flicker"), leading to confusion and false entries. The Solution: The Rapid ICT Suite uses 100% confirmed, closed-candle data for all its calculations (OB, FVG, and Liquidity). A zone will only appear on your chart after the price action that confirms it is complete. This means every signal is stable, reliable, and non-repainting. 2. ✅ Frame-Perfect, Precise Placement The Problem: Indicators that use lookback logic often draw their signals one candle too late, causing a visual disconnect between the price pattern and the signal itself. The Solution: We have corrected this common flaw. Every box and line is drawn starting from the exact confirmation candle of the pattern. This frame-perfect precision is critical for accurate analysis and planning your entries. 3. ✅ The Dual Analysis Engine: Uncluttered & Flexible The Problem: Trying to analyze multiple timeframes at once can lead to cluttered charts and mental overload . The Solution: This suite contains two independent parts that you can control separately. Part 1 gives you the macro context—the HTF structure where big moves originate. Part 2 gives you the micro details—the real-time FVG and iFVG story on your trading timeframe. Use them together for a complete picture, or toggle one off to focus on a specific aspect of your strategy. This flexibility keeps your workspace clean and your analysis sharp. How to Use & Settings Explained The indicator settings are neatly organized into two main parts. Part 1: MTF Concepts (OB, FVG, Liq) This section controls the Higher Timeframe boxes that are overlaid onto your current chart. Higher-TF for OB/FVG/Liq: This is the most important setting. Select the higher timeframe you want to analyze. For example, if you are trading on the 15-minute chart, you might set this to 240 (4-Hour) to see the key 4H zones. Show Order-Blocks / FVGs / Liquidity: Simple toggles to turn each type of HTF zone on or off. Max... Count: Controls how many of the most recent zones are displayed on the chart, preventing clutter from old, irrelevant zones. Part 2: FVG & iFVG (Lines/Labels) This section controls the second engine, which analyzes FVGs and iFVGs on its own selected timeframe. Timeframe for FVG/iFVG: Choose the timeframe for this analysis. You can leave it blank to use your current chart's timeframe, or set it to a specific one. Mitigation Type & Mitigation %: A powerful feature to define when an FVG is considered "used up." Type: Choose if mitigation is counted from the candle's Wick or Close. Percent: Set how far price must retrace into an FVG (e.g., 50%) before it is considered mitigated and the lines are removed from your chart. FVG/iFVG Count: Controls how many of the most recent FVG/iFVG zones are displayed. Style & Color Settings: Fully customize the appearance of the lines and labels to match your chart theme. Final Words This indicator was built to provide actionable clarity. By understanding the interplay between higher-timeframe structure and current price action, you can significantly enhance your trading edge. Thank you for choosing the Rapid ICT Suite. Happy trading!
Indicatore Pine Script®
di nfsmohi
1
TIME-SPLT ACADEMY INDICATOR# TIME-SPLT ACADEMY CISD + FVG + TSM FRACTALS - Comprehensive Market Structure Analysis Tool ## Overview This indicator combines three essential market structure analysis components into a unified trading tool: Change in State Direction (CISD), Fair Value Gaps (FVG), and TSM Fractals. This integration provides traders with a complete framework for identifying market structure breaks, price imbalances, and key pivot levels on any timeframe. ## Component 1: CISD (Change in State Direction) **What it is:** CISD identifies significant breaks in market structure by tracking when price decisively breaks above previous swing highs (bullish CISD) or below previous swing lows (bearish CISD). This concept is fundamental to understanding trend changes and continuation patterns. **How it works:** - Monitors swing highs and lows using customizable pivot periods - Tracks when price closes above a previous swing high (bullish structure break) - Tracks when price closes below a previous swing low (bearish structure break) - Draws horizontal lines from the pivot point to the break point with "CISD" labels - Works on multiple timeframes simultaneously **Trading Applications:** - Identifies trend changes and continuation signals - Provides entry signals on structure breaks - Helps determine market bias and direction ## Component 2: FVG (Fair Value Gaps) **What it is:** Fair Value Gaps are price imbalances that occur when there's a gap between the high of one candle and the low of another candle two periods later, with the middle candle not filling this gap. These represent areas where price moved inefficiently and often return to "fill" the gap. **How it works:** - Analyzes 3-candle patterns to identify gaps - Bearish FVG: Gap between low and high where price dropped leaving unfilled space above - Bullish FVG: Gap between high and low where price rose leaving unfilled space below - Tracks 8 different candle body combinations for each direction (up, down, doji patterns) - Monitors gap mitigation when price returns to fill the imbalance - Changes color when gaps are partially or fully mitigated **Gap Detection Logic:** - Bearish FVG patterns: DDD, DDJ, JDD, UDJ, JDU, UDD, DDU, UDU - Bullish FVG patterns: DUD, DUJ, JUD, UUJ, JUU, UUD, DUU, UUU - (D=Down candle, U=Up candle, J=Doji candle) **Trading Applications:** - High-probability reversal zones when price returns to FVGs - Support and resistance levels - Target areas for limit orders - Risk management reference points ## Component 3: TSM Fractals **What it is:** TSM Fractals identify significant pivot highs and lows using Williams Fractal methodology. These mark potential reversal points and key support/resistance levels. **How it works:** - Identifies fractal highs: peaks where the center candle's high is higher than surrounding candles - Identifies fractal lows: valleys where the center candle's low is lower than surrounding candles - Uses customizable lookback periods (default 15) for fractal identification - Displays horizontal lines with "$" symbols at fractal levels - Maintains a configurable number of recent fractals on the chart **Trading Applications:** - Key support and resistance levels - Potential reversal zones - Confluence with other analysis tools - Stop loss placement reference points ## Why This Combination Works **Synergistic Analysis:** Each component provides different but complementary information: 1. **CISD** shows when market structure changes, indicating trend shifts or continuation 2. **FVGs** reveal where price has moved inefficiently and may return for rebalancing 3. **Fractals** highlight key pivot points that often act as support/resistance **Trading Edge:** The combination allows for: - **Entry Confirmation:** Wait for CISD breaks near unfilled FVGs at fractal levels - **Risk Management:** Use FVG boundaries and fractal levels for stop placement - **Target Selection:** Project moves to opposite FVGs or fractal levels - **Market Context:** Understand whether you're trading with or against structure ## Key Features **Multi-Timeframe CISD:** - Customizable timeframe settings (Minute, Hour, Day, Week, Month) - Adjustable swing length for pivot identification - Customizable line styles, widths, and colors - Optional alerts on structure breaks **Advanced FVG Management:** - Automatic gap size filtering - Real-time mitigation tracking - Color-coded active vs. mitigated gaps - Optional pip value labels - Large gap alerts for significant imbalances **Intelligent Fractal Display:** - Configurable fractal periods - Maximum fractal count management - Clean visual presentation - Historical fractal preservation ## Settings & Customization **CISD Settings:** - Timeframe selection and multipliers - Swing length adjustment (default 7) - Line styling options - Color customization for bullish/bearish breaks - Alert toggle options **FVG Settings:** - Show/hide toggles for each direction - Minimum gap size filtering - Alert threshold for large gaps - Color schemes for active and mitigated gaps - Optional size labels in pips **Fractal Settings:** - Fractal period adjustment (default 15) - Maximum display count (default 10) - Show/hide toggle ## Educational Value This indicator teaches traders to: - Understand market structure concepts - Recognize price inefficiencies - Identify key pivot points - Combine multiple analysis methods - Develop systematic trading approaches ## Use Cases **Swing Trading:** Identify major structure breaks with FVG confluence **Day Trading:** Use lower timeframe CISDs with intraday FVGs **Scalping:** Quick entries at FVG mitigation near fractal levels **Position Trading:** Higher timeframe structure analysis with major FVGs ## Technical Implementation - Utilizes Pine Script v6 for optimal performance - Efficient array management for historical data - Real-time calculations without repainting - Memory-optimized box and line management - Multi-timeframe data handling with proper security functions This comprehensive tool eliminates the need for multiple separate indicators, providing everything needed for complete market structure analysis in one cohesive package. The educational component helps traders understand not just what the signals are, but why they work and how to use them effectively in different market conditions.
Indicatore Pine Script®
di INDICATORSPRO
GEEKSDOBYTE IFVG w/ Buy/Sell Signals1. Inputs & Configuration Swing Lookback (swingLen) Controls how many bars on each side are checked to mark a swing high or swing low (default = 5). Booleans to Toggle Plotting showSwings – Show small triangle markers at swing highs/lows showFVG – Show Fair Value Gap zones showSignals – Show “BUY”/“SELL” labels when price inverts an FVG showDDLine – Show a yellow “DD” line at the close of the inversion bar showCE – Show an orange dashed “CE” line at the midpoint of the gap area 2. Swing High / Low Detection isSwingHigh = ta.pivothigh(high, swingLen, swingLen) Marks a bar as a swing high if its high is higher than the highs of the previous swingLen bars and the next swingLen bars. isSwingLow = ta.pivotlow(low, swingLen, swingLen) Marks a bar as a swing low if its low is lower than the lows of the previous and next swingLen bars. Plotting If showSwings is true, small red downward triangles appear above swing highs, and green upward triangles below swing lows. 3. Fair Value Gap (3‐Bar) Identification A Fair Value Gap (FVG) is defined here using a simple three‐bar logic (sometimes called an “inefficiency” in price): Bullish FVG (bullFVG) Checks if, two bars ago, the low of that bar (low ) is strictly greater than the current bar’s high (high). In other words: bullFVG = low > high Bearish FVG (bearFVG) Checks if, two bars ago, the high of that bar (high ) is strictly less than the current bar’s low (low). In other words: bearFVG = high < low When either condition is true, it identifies a three‐bar “gap” or unfilled imbalance in the market. 4. Drawing FVG Zones If showFVG is enabled, each time a bullish or bearish FVG is detected: Bullish FVG Zone Draws a semi‐transparent green box from the bar two bars ago (where the gap began) at low up to the current bar’s high. Bearish FVG Zone Draws a semi‐transparent red box from the bar two bars ago at high down to the current bar’s low. These colored boxes visually highlight the “fair value imbalance” area on the chart. 5. Inversion (Fill) Detection & Entry Signals An inversion is defined as the price “closing through” that previously drawn FVG: Bullish Inversion (bullInversion) Occurs when a bullish FVG was identified on bar-2 (bullFVG), and on the current bar the close is greater than that old bar-2 low: bullInversion = bullFVG and close > low Bearish Inversion (bearInversion) Occurs when a bearish FVG was identified on bar-2 (bearFVG), and on the current bar the close is lower than that old bar-2 high: bearInversion = bearFVG and close < high When an inversion is true, the indicator optionally draws two lines and a label (depending on input toggles): Draw “DD” Line (yellow, solid) Plots a horizontal yellow line from the current bar’s close price extending five bars forward (bar_index + 5). This is often referred to as a “Demand/Daily Demand” line, marking where price inverted the gap. Draw “CE” Line (orange, dashed) Calculates the midpoint (ce) of the original FVG zone. For a bullish inversion: ce = (low + high) / 2 For a bearish inversion: ce = (high + low) / 2 Plots a horizontal dashed orange line at that midpoint for five bars forward. Plot Label (“BUY” / “SELL”) If showSignals is true, a green “BUY” label is placed at the low of the current bar when a bullish inversion occurs. Likewise, a red “SELL” label at the high of the current bar when a bearish inversion happens. 6. Putting It All Together Swing Markers (Optional): Visually confirm recent swing highs and swing lows with small triangles. FVG Zones (Optional): Highlight areas where price left a 3-bar gap (bullish in green, bearish in red). Inversion Confirmation: Wait for price to close beyond the old FVG boundary. Once that happens, draw the yellow “DD” line at the close, the orange dashed “CE” line at the zone’s midpoint, and place a “BUY” or “SELL” label exactly on that bar. User Controls: All of the above elements can be individually toggled on/off (showSwings, showFVG, showSignals, showDDLine, showCE). In Practice A bullish FVG forms whenever a strong drop leaves a gap in liquidity (three bars ago low > current high). When price later “fills” that gap by closing above the old low, the script signals a potential long entry (BUY), draws a demand line at the closing price, and marks the midpoint of that gap. Conversely, a bearish FVG marks a potential short zone (three bars ago high < current low). When price closes below that gap’s high, it signals a SELL, with similar lines drawn. By combining these elements, the indicator helps users visually identify inefficiencies (FVGs), confirm when price inverts/fills them, and place straightforward buy/sell labels alongside reference lines for trade management.
Indicatore Pine Script®
di RayenGeeksdoByte
DD IFVG [Pro+] (Dodgy)Introduction DD IFVG° is an automated charting tool built to track inversion logic after displacement events—specifically when Fair Value Gaps (FVGs) are closed through and act as an inversion gap. The tool adheres to logic taught by DodgyDD and inspired by Inner Circle Trader (ICT) methodology, offering a clean visual interface to support traders studying price behaviour after liquidity sweeps, FVG closures, and delivery to targets. This indicator does not draw zones or suggest direction. It operates entirely on confirmed price events and produces logic-bound visuals designed for traders who already understand IFVG-based reasoning and seek visual consistency across sessions and Timeframes. Key Terms and Definitions Swing High / Swing Low: A swing high is a local price peak with lower highs on either side. A swing low is a local trough with higher lows on either side. These are used to detect where liquidity may rest and are required for confirming the initial raid condition in the IFVG model. Liquidity Raid: This occurs when price breaks a prior swing high or low, effectively “sweeping” a level where orders may be clustered. A raid is a required precursor to inversion logic in this model. The tool will not evaluate a potential Fair Value Gap or DD Inversion unless a swing high or low has been taken first. Fair Value Gap (FVG): A Fair Value Gap is a price imbalance that occurs when a strong move leaves a gap between candles—specifically, when the high of one candle and the low of a later candle do not overlap. FVGs often emerge during displacement and are commonly studied as inefficiencies within a price leg. DD Inversion: A DD inversion happens when price fully closes through an existing Fair Value Gap after raiding liquidity, suggesting the original imbalance rebalanced, and looks to reverse its original role. For example, when a bearish FVG is closed above after raiding a swing low, it may behave with a change of orderflow (bullish inversion). The tool recognizes IFVGs as “inverted” after a full-body candle closes through the gap post raid. Displacement: A strong, directional price move—typically with momentum—that leaves a Fair Value Gap behind. Displacement is important in inversion logic, as it creates the context and confidence in comparing and contrasting FVGs and DD Inversions for obvious flips in market behaviour. DD Line: Once inversion occurs, the tool draws a single horizontal array on the candle's close. It marks the model’s activation level—not a prediction level or a support/resistance zone. It serves as a reference for when model logic is sequentially active. Opposing Swing: The swing high or low opposite the one that was swept during the initial raid. This becomes the model’s first target for mechanical delivery and is automatically drawn once the DD line is triggered. When price reaches this swing, the model has reached its objective and could offer opportunities for further continuation to additional liquidity pools. Invalidation: A DD Inversion is considered invalid in one of two scenarios, which the user can toggle individually: a body print back above/below the inversion in bearish/bullish conditions, or trading above/below the most recent swing high/low after the liquidity raid in bearish/bullish conditions. The DD line will continue extending when traded to until the setup is invalidated, or when the Opposing Swing is reached. Consequent Encroachment (CE): The midpoint (50%) of the FVG or IFVG. This line can be optionally displayed for users who use midpoint reference logic. It is not required by the model’s internal logic but may assist with discretionary interpretation. Description At its core, DD IFVG° follows a structured three-step logic sequence: a FVG is created, liquidity is taken, and the Fair Value Gap (FVG) inside of the leg of the raid is closed through, signally a potential orderflow shift. Once inversion is confirmed, a DD line is plotted at the close of the candle that caused the inversion, making it the structural anchor for the model. The tool does not account for partial fills or candle wicks for FVGs or IFVGs. Only full-body closures through a qualifying FVG are recognized. When this occurs, a bullish or bearish inversion is validated and the model becomes active. From there, the opposing swing (the unswept high or low from the displacement leg) is automatically drawn as the target for the IFVG model. The model remains active until either the opposing swing is tagged (completion) or Invalidation Condition is triggered (close through DD IFVG, or price violating the liquidity raid swing). Upon invalidation, the DD line turns gray, signalling that the structure is no longer valid for ongoing tracking. Key Features The Bias allows traders to define whether to track bullish inversions (closing above bearish FVGs), bearish inversions (closing below bullish FVGs), or neutral for both. This allows isolate directional focus or display all structures on the same chart mechanically. The Liquidity Timeframe defines the Timeframe for swing highs and lows that are identified for the required liquidity raid. The Chart mode allows analysts to use the active chart Timeframe. Auto enables a custom Timeframe Alignment, explained inside of the setting tooltip. Custom allows for specific frame alignment, which is helpful when syncing with specific higher-Timeframe structure. Session allows the user to use session highs and lows for the liquidity raid. Observe the difference in the DD IFVG's frequency based on different Liquidity Timeframe configurations: Chart: Automatic: Custom (1H): Session: The FVG Filter Timeframe requires the DD setup to trade into a FVG before qualifying the raid filter. For instance, setting this to 4H ensures that only setups that form within a 4-hour FVG. This gives analysts an additional filter to qualify the start of the mechanical model. Session Filter enables traders to define up to four specific Time blocks when the model is permitted to trigger. The Macros Only toggle filters setups further by limiting activation to the first and last 10 minutes of each hour—a filter inspired for intraday traders and scalpers. The Invalidation Condition determines when a DD inversion is considered not longer valid. Close will maintain the inversion as active until price prints a body past the DD IFVG. Swing will maintain the inversion as active until the most recent swing from the liquidity raid is traded through; in this case a warning will appear once price prints a candle body past the DD IFVG. Model Style includes customizable controls for the DD line, the opposing swing marker, and invalidated states. Label appearance, line styles, and extension behaviour are fully user-controlled. Traders can also enable the Consequent Encroachment (CE) line, which marks the 50% midpoint of the FVG and IFVG. An Info Table is available to display current model state, including user bias, active Timeframes, asset, and Time filter. Its position is fully customizable and can be moved to match chart preferences. How Traders Can Use the Indicator Effectively DD IFVG° is not meant to identify trade signals, entries, or exits. It is best used as a visual tracker and confluence for structure-based delivery, particularly for those following DodgyDD-style IFVG logic. The tool excels as a companion for: Journaling and reviewing IFVG-based setups across Timeframes and sessions Studying structural completion or invalidation behaviour Tracking delayed deliveries and retracement-based logic Traders using the tool should be familiar with FVG formation, inversion criteria, and the importance of opposing swing resolution. Usage Guidance Add DD IFVG° to a TradingView chart. This is a fractal script and can be applied across any Timeframe or asset pairing depending on your session model and preferences. Use the DD line to track inversion structure, monitor when inversions are created and negated, and reference the opposing swing to determine whether structural delivery has completed. Use the DD IFVG° in combination with your own discretion and narrative to assess when the model has flipped, held, or broken. Terms and Conditions Our charting tools are products provided for informational and educational purposes only and do not constitute financial, investment, or trading advice. Our charting tools are not designed to predict market movements or provide specific recommendations. Users should be aware that past performance is not indicative of future results and should not be relied upon for making financial decisions. By using our charting tools, the purchaser agrees that the seller and the creator are not responsible for any decisions made based on the information provided by these charting tools. The purchaser assumes full responsibility and liability for any actions taken and the consequences thereof, including any loss of money or investments that may occur as a result of using these products. Hence, by purchasing these charting tools, the customer accepts and acknowledges that the seller and the creator are not liable nor responsible for any unwanted outcome that arises from the development, the sale, or the use of these products. Finally, the purchaser indemnifies the seller from any and all liability. If the purchaser was invited through the Friends and Family Program, they acknowledge that the provided discount code only applies to the first initial purchase of any Toodegrees product. The purchaser is therefore responsible for cancelling – or requesting to cancel – their subscription in the event that they do not wish to continue using the product at full retail price. If the purchaser no longer wishes to use the products, they must unsubscribe from the membership service, if applicable. We hold no reimbursement, refund, or chargeback policy. Once these Terms and Conditions are accepted by the Customer, before purchase, no reimbursements, refunds or chargebacks will be provided under any circumstances. By continuing to use these charting tools, the user acknowledges and agrees to the Terms and Conditions outlined in this legal disclaimer.
Indicatore Pine Script®
di toodegrees
12
Price Action Toolkit | Flux Charts💎 GENERAL OVERVIEW Introducing our new Price Action Toolkit indicator! Price Action Toolkit integrates key level strategy , traditional supply-demand analysis , and market structures to help traders in their decisions. Now with features that are available to use in multiple timeframes! Features of the new Price Action Toolkit indicator : Volumized Fair Value Gaps (FVGs) Volumized Order & Breaker Blocks Identification of Market Structures Equal Highs & Lows Buyside & Sellside Liquidity Premium & Discount Zones MTF Highs & Lows (Daily, Weekly, Monthly, Pre-Market) Customizable Settings 📌 HOW DOES IT WORK ? We believe that the analytical elements that are within this indicator work best when they co-exist with each other on the chart. Trading often requires taking multiple elements into consideration for better accuracy on market analysis. Thus, we combined some of the useful strategies in one indicator for ease of use. 1. Volumized Fair Value Gaps Fair value gaps often occur when there is an imbalance in the market, and can be spotted with a specific formation on the chart. The volume when the FVG occurs plays an important role when determining the strength of it, so we've placed two bars on the FVG zone, indicating the high & low volumes of the FVG. The high volume is the total volume of the last two bars on a bullish FVG, while the low volume is - of the FVG. For a bearish FVG, the total volume of the last two bars is the low volume. The indicator can also detect FVGs that exist in other timeframes than the current chart. 2. Volumized Order Blocks Order blocks occur when there is a high amount of market orders exist on a price range. It is possible to find order blocks using specific formations on the chart. The high & low volume of order blocks should be taken into consideration while determining their strengths. The determination of the high & low volume of order blocks are similar to FVGs, in a bullish order block, the high volume is the last 2 bars' total volume, while the low volume is the oldest bar's volume. In a bearish order block scenerio, the low volume becomes the last 2 bars' total volume. 3. Volumized Breaker Blocks Breaker blocks form when an order block fails, or "breaks". It is often associated with market going in the opposite direction of the broken order block, and they can be spotted by following order blocks and finding the point they get broken, ie. price goes below a bullish order block. The volume of a breaker block is simply the total volume of the bar that the original order block is broken. Often the higher the breaking bar's volume, the stronger the breaker block is. 4. Market Structures Sometimes specific market structures form and break as the market fills buy & sell orders. Formed Change of Character (CHoCH) and Break of Structure (BOS) often mean that market will change direction, and they can be spotted by inspecting low & high pivot points of the chart. 5. Equal Highs & Lows Equal Highs & Lows occur when there is a significant amount of difference between a candle's close price and it's high / low value, and it happens again in a specific range. EQH and EQL usually mean there is a resistance that blocks the price from going further up / down. 6. Buyside & Sellside Liquidity Buyside & Sellside Liquidity zones are where most traders place their take-profits and stop-losses in their long / short positions. They are spotted by using high & low pivot points on the chart. 7. Premium & Discount Zones The premium zone is a zone that is over the fair value of the asset's price, and the discount zone is the opposite. They are formed by the latest high & low pivot points. 8. MTF Highs / Lows MTF Highs / Lows are actually pretty self-explanatory, you can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows. 🚩UNIQUENESS Our new indicator offers a comprehensive toolkit for traders, combining multiple analytical elements with customizable settings to aid in decision-making across different market conditions and timeframes. The volumetric information of both FVGs and Order & Breaker Blocks will be present in your chart to serve you greater detail about them. The indicator also efficiently identifies market structures, liquidity zones and premium & discount zones to give you an insight about the current state of the market. And finally with the use of multiple timeframes , you can easily take a look at the bigger picture. We recommend reading the "How Does It Work" section of the descripton to get a better understanding about how this indicator is unique to others. ⚙️SETTINGS 1. General Configuration Show Historic Zones -> This will show historic Fair Value Gaps, Order & Breaker Blocks and Sellside & Buyside liquidities which are expired. 2. Fair Value Gaps Enabled -> Enables / Disables Fair Value Gaps Volumetric Info -> The volumetric information of the FVG Zones will be rendered if activated. Zone Invalidation -> Select between Wick & Close price for FVG Zone Invalidation. Zone Filtering -> With "Average Range" selected, algorithm will find FVG zones in comparison with average range of last bars in the chart. With the "Volume Threshold" option, you may select a Volume Threshold % to spot FVGs with a larger total volume than average. FVG Detection -> With the "Same Type" option, all 3 bars that formed the FVG should be the same type. (Bullish / Bearish). If the "All" option is selected, bar types may vary between Bullish / Bearish. Detection Sensitivity -> You may select between Low, Normal or High FVG detection sensitivity. This will essentially determine the size of the spotted FVGs, with lower sensitivies resulting in spotting bigger FVGs, and higher sensitivies resulting in spotting all sizes of FVGs. 3. Order Blocks Enabled -> Enables / Disables Order Blocks Volumetric Info -> The volumetric information of the Order Blocks will be rendered if activated. Zone Invalidation -> Select between Wick & Close price for Order Block Invalidation. Swing Length -> Swing length is used when finding order block formations. Smaller values will result in finding smaller order blocks. 4. Breaker Blocks Enabled -> Enables / Disables Breaker Blocks Volumetric Info -> The volumetric information of the Breaker Blocks will be rendered if activated. Zone Invalidation -> Select between Wick & Close price for Breaker Block Invalidation. 5. Timeframes You can set and enable / disable up to 3 timeframes. Note that only higher timeframes than the current chart will work. 6. Market Structures Break Of Structure ( BOS ) -> If the current structure of the market is broken in a bullish or bearish direction, it will be displayed. Change Of Character ( CHoCH ) -> If the market shifts into another direction, it will be displayed. Change Of Character+ ( CHoCH+ ) -> This will display stronger Change Of Characters if enabled. 7. Equal Highs & Lows EQH -> Enables / Disables Equal Highs. EQL -> Enables / Disables Equal Lows. ATR Multiplier (0.1 - 1.0) -> Determines the maximum difference between highs / lows to be considered as equal. Lower values will result in more accurate results. 8. Buyside & Sellside Liquidity Zone Width -> Determines the width of the liquidity zones, 1 = 0.025%, 2 = 0.05%, 3 = 0.1%. 9. Premium & Discount Zones Enabled -> Enables / Disables Premium & Discount Zones. 10. MTF Highs / Lows You can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows using this setting. You can also switch their line shapes between solid, dashed and dotted.
Indicatore Pine Script®
di fluxchart
77
Price Action SuiteThe TRN Price Action Suite incorporates a treasure trove of time and price action concepts. It includes a set of trading tools that, when combined, allow for a more accurate view of the market. This enables traders to find high probability entry points before the market moves to the next liquidation level. Features of the TRN Price Action Suite: (Inverse) Fair Value Gaps (FVG) Order Blocks (OB) FVG and OB with Cumulative Volume Delta Volume Imbalances Market Structure Liquidity levels Sessions Kill zones/Opening Range The indicator helps traders to easily identify favorable market conditions and high probability trade setups. It automatically finds time and price action concepts and displays them in an intuitive way on the chart. One of the highlights is the detection of Fair Value Gaps and Order Blocks in connection with Cumulative Volume Delta (approx.). You will not find this connection anywhere else. Fair Value Gaps (FVGs) A fair value gap occurs when there are inefficiencies in the market or imbalanced buying and selling pressures. Fair value gaps can become a magnet for the price before continuing in the same direction. Special attention should be paid to FVGs that are supported by support and resistance levels, as these offer a higher probability of success for trades. Additionally, the indicator plots inverse FVG (iFVG). These are FVG that are “closed” by a FVG in the other direction. IFVGs are a strong sign of the market to continue in the direction of the iFVG. In addition to the FVGs you see on the chart, you can add also FVGs from a higher timeframe including the cumulative buy/sell volume. For this you can set “Timeframe 1” and “Timeframe 2” in the settings to your preferred timeframes. E.g. you trade on a 5-minute chart, and you want to see FVGs from 4 hours and a daily chart, then you set Timeframe 1 to 4 h and to Timeframe 2 to 1 D. Order Blocks and Volume Imbalances can also be shown from higher timeframes. Order Blocks (OBs) Order blocks are areas on the chart where a high concentration of limit orders was found in the past. They can serve as potential support or resistance areas. These represent areas in the market where there is an oversupply (supply) or an excess demand (demand). They are often key zones for potential turning points or continuations of the current trend. A bullish OB, for example, is the last bearish candle before a significant uptrend. FVGs and OBs with Cumulative Volume Delta The TRN Price Action Suite can show FVGs and OBs with the corresponding Cumulative Volume Delta (CVD). It is a metric to analyze market dynamics by tracking the net difference between buying and selling volumes over a specific timeframe. It is used to determine the strength of the FVG/OB. The FVG/OB includes two bars on the left side, indicating the cumulative buy volume in green as well es the cumulative sell volume in red. At the right side of the FVG/OB box the ratio of the cumulative buy/sell volume is displayed. A high ratio over 1, for example 1.5, indicates a lot of buying pressure. On the hand, a ratio far below 1, for example 0.66, indicates a lot of selling pressure. Volume Imbalances (VIBs) Volume Imbalances indicate a price gap from the previous close, but unlike gaps, there is no absence of trading activity within a specific price range. Bullish VIs have opening and closing prices above the previous close, with overlap between the current low and previous high. Bearish VIs are vice versa. Market Structure The market structure represents the dominant trend in the market. It is based on swing highs and lows. For instance, if the price makes higher highs (HH) and higher lows (HL) the market structure represents an uptrend. Vice versa if price makes lower lows (LL) and lower highs (LH) the market trend is down. If the market structure is up, traders can enter positions in a pullback. For this, a trader could use a FVG or an OB as an entry condition. Market Structure Shift (MSS) (Change of Character (ChoCh)) A market structure shift occurs when the market transitions from one dominant trend to a different one, often signaling a potential change in the underlying market dynamics. A MSS signals the start of a new trend. It signals the change from an uptrend to a down trend and vice versa. Therefore, it is sometimes called change of character (ChoCh). A valid MSS should ideally occur in a strong supply or demand zone. This indicates that the market may be approaching a trend reversal or consolidation. Break of Structure (BOS) A break of structure happens when the market breaks out of its established trading range or pattern. The market continues its dominant trend, indicated by the last MSS. In an uptrend, for example, each time the price breaks through a new high, a "bullish BOS" is formed. This indicates that the market can overcome previous resistance levels and continue to rise. Levels One core concept in trading is that price flows to areas of liquidity. Natural liquidity areas are the current day open, high, low (CDO, CDH, CDL) or the previous day high, low, close (PDH, PDL, PDC). The same is true for the current week (CWO, CWH, CWL) and the previous week (PWH, PWL, PWC). Pay special attention in case some of these levels are close together. Then these levels serve like a magnet for the price. The TRN Price Action Suite indicator can cluster these levels fully automatically together to give the trader the flexibility to focus solely on the trading part. Sessions Sessions are the trading hours during which the banks are actively trading. The three main trading sessions: Asia: Most of the volume from the Asian players are handled within this session. London: This is where the European players are most active. New York: In the New York session all the USA players are active as well as all the other American players. Furthermore, a lot of global players are active in this session as well. Killzones A kill zone in trading refers to a specific time period during the trading day when the market experiences increased volatility and liquidity. It is an opportunity for traders to capitalize on potential price movements and generate profits. There are several different killzones during the day. There are three different types of killzones: Indices/Futures: This one is suitable if you trade products like the ES, NQ, FDAX, CL or Stocks, Options. Forex: If you trade Forex this setting will mark the most liquid periods of the day. Opening Range: In case you trade the opening range of the sessions, use this setting. Trading Example
Indicatore Pine Script®
di TRN-Trading
2
Radi IQ [TradingIQ]Introducing "Radi IQ". Radi IQ is a comprehensive market structure indicator designed to provide traders with a detailed view of key price levels and market behavior. It combines several analytical methods—including internal and external structure analysis, fair value gaps, order blocks, breaker blocks, rejection blocks, premium discount zones, equal levels, directional liquidity grabs, and trend meters —to help users better understand areas of support and resistance, potential turning points, and liquidity events in the market. Key Components and Their Functions Market Structure Analysis Internal and External Structure : The indicator evaluates market structure on two levels. The internal analysis focuses on immediate price action (e.g., recent support/resistance and swing points), while the external analysis uses a higher timeframe to provide context. This dual approach helps to confirm the strength of key levels by comparing short-term moves with the broader market trend. Break of Structure (BoS) and Change of Character (CHoCH) : These signals highlight moments when the market shifts its behavior. A BoS indicates that a previous level of support or resistance has been overcome, while a CHoCH signals a change in the market’s character. Both are marked clearly on the chart using distinct color codes. Break of Structure + (BoS+) and Change of Character + (CHoCH+) : These signals highlight moments when the market shifts its behavior and is confirmed by prior price action. A BoS + indicates that a previous level of support or resistance has been overcome, while price action achieves higher highs and higher lows (resistance break) or lower highs and lower lows (support break). CHoCH + signals a change in the market’s character when supported by prior price action - lower highs for a support break and higher lows for a resistance break. BoS and CHoCH The image above shows BoS and CHoCH identified on the price chart, and explains what each signifies. A Break Of Structure (BoS) occurs when price decisively moves beyond a previously established support or resistance level. It indicates that the current trend or market pattern is being challenged, and the market may be ready to change direction. A Change of Character (CHoCH) describes a shift in how the market behaves. A CHoCH occurs when, in an uptrend, a previously established support level breaks, or in a downtrend, a previously established resistance level breaks. This break indicates that the market's typical structure is shifting, suggesting that the current trend may be losing its strength and that a reversal or a new trend could be developing. CHoCH+ The image above explains CHoCH+ and how it forms, while highlighting an instance where a downside CHoCH+ formed following lower highs. A Change of Character + (CHoCH+) describes a shift in how the market behaves that is supported by prior price action. For support breaks, price must form lower highs before breaking support. The image above explains CHoCH+ for resistance breaks, while highlighting an instance where a resistance point broke that was supported by prior price action. BoS+ The image above explains BoS+ and how it forms, while highlighting an instance where an upside BoS+ formed following higher highs and higher lows. A BoS+ resistance break requires higher highs and higher lows prior to the resistance point being closed over. The image above explains BoS+ support break, while highlighting an instance where a downside BoS+ formed following lower highs and lower lows. A BoS+ support break requires lower highs and lower lows prior to the support point being closed under. Future BoS and CHoCH Radi IQ also displays where the next BoS and CHoCH points are located. The image above shows the feature in action. With this, traders will always know where the next key support/resistance breakpoints are before they actually occur. Fair Value Gaps (FVG) The indicator identifies gaps in the price where little or no trading occurred—known as fair value gaps. These gaps can act as temporary support or resistance and may indicate areas where the market is likely to correct. FVGs are displayed with clear color gradients that differentiate between upward and downward gaps. The image above shows an identified upside FVG. In the image, the identified upside FVG acted as a support point for price. The image above shows an identified downside FVG. In the image, the identified downside FVG acted as a resistance point for price. Low Volume FVG In addition to identifying trading FVGs - Radi IQ can also specifically detect low volume fair value gaps. Ideally, these fair value gaps will form inside a low volume node on a volume profile. Low volume node FVGs are important because these are areas where very little trading occurred and is confirmable, indicating an imbalance in supply and demand. Since few trades took place there, the market often moves quickly through these zones when revisited, which can lead to rapid price changes. This "gap" in trading activity can serve as a signal for potential reversals or fast moves, offering opportunities to enter or exit positions based on expected market behavior. The image above shows identified FVGs that formed on low volume. Large Area FVGs Radi IQ is also capable of filtering out “inconsequential” FVGs. With this, Radi IQ can be enabled to only mark FVGs that cover a wide price range. The image above shows the feature enabled, and all identified FVGs formed with a wide price range. Large Area FVGs and Low Volume FVGs Combined Traders can also enable Radi IQ to only mark FVGs that form on low volume and have a wide price range - allowing traders to only identify the highest quality FVGs on the chart. Order Blocks and Premium Discount Zones Order Blocks: Radi IQ detects areas where large orders have previously been placed by institutional traders. These blocks can act as strong levels of support or resistance, and the indicator marks bullish and bearish order blocks with dedicated colors. What is an order block? Order blocks are clusters of orders that institutions have executed to enter or exit a market position. They typically form when there is a period of consolidation before a significant move. For example, the last bullish candle before a strong down move may indicate a supply order block, while the last bearish candle before a sharp rally might be considered a demand order block. Why They Form: Institutions don’t trade in small, sporadic amounts; they accumulate or distribute large volumes of an asset. To avoid slippage and minimize market impact, they execute these orders over a zone rather than at a single price point. This creates a recognizable “block” on the chart. Order Block Identification Types Strength Score The “Strength Score” order block detection mode is a TradingIQ proprietary ranking system for identified order blocks. Purpose The purpose of the “Strength Score” ranking system is to determine the “strength” or significance of an order block and rate the zone’s likelihood to act as support/resistance when retested in the future. The scoring system ranks from 0 - 10, with “0” indicating a “weak” score or low likelihood of acting as a key support/resistance level when retested in the future. A rating of “5” indicates a “moderate” score, indicating that the order block has a moderate likelihood of acting as a key support/resistance level when retested in the future. A rating of “10” indicates a “strong” score, indicating that the order block has a strong likelihood of acting as a key support/resistance level when retested in the future. How It Works The score is calculated by examining the price move following the formation of an order block. The stronger the price move after an order block forms - the higher the Strength Score. The image above shows a bearish order block with a score of “5” identified on the chart. The order block successfully operates as a resistance point when retested. The image above shows a bullish order block with a score of “5” identified on the chart. The order block successfully operates as a resistance point when retested. Volume-Based The volume-based order block detection method detects traditional order blocks, but goes one step further by identifying the highest concentration point of volume for the bar and drawing the order block around this concentration point. Key features when using the volume-based order block detection method: The top of the order block is anchored to the top of the highest volume concentration point of the bar The bottom of the order block is anchored to the bottom of the highest volume concentration point of the bar The total volume that went into creation of the order block is displayed on the chart The total volume of the order block is recorded as a percentage relative to the total volume for all order blocks on the chart The image above shows the detection method in action. Breaker Blocks A breaker block is a specific type of order block that gains significance when price breaks through it and then often retests the level as a new area of support or resistance. Essentially, it’s a zone where, after the initial break, the previous level (which once acted as strong support or resistance) flips roles. For example, in an uptrend, if the price falls below a key support level, that level can become a breaker block and act as resistance if the price tries to move back up. Conversely, in a downtrend, a broken resistance level can serve as new support. Traders monitor breaker blocks because they often mark a shift in market sentiment and can provide potential entry or exit points once the market re-engages with these levels. The image above shows a breaker block above price acting as resistance. The image above shows a breaker block below price acting as support. Rejection Blocks A rejection block is a price area where the market shows a strong unwillingness to move beyond a certain level. This typically happens when price approaches a specific level but then is quickly rejected, leading to a bounce in the opposite direction. In other words, a rejection block forms when traders' orders create a barrier, causing the price to reverse rather than break through. Traders watch these areas closely, as they often signal a strong concentration of supply or demand that could provide potential entry or exit points for trades. The image above shows both a verified upside rejection block acting as resistance, and an untested downside rejection block. Rejection blocks are expected to function as strong support/resistance points when retested in the future. Premium Discount Zones Premium Discount Zones : These zones reflect areas where price is trading above (premium) or below (discount) a fair value range. They help traders gauge whether the current market price is relatively high or low compared to historical averages. Premium Discount Zones account for recent swing highs and lows to calculate a fair value along with discount and premium prices over an intermediate time window. The image above shows the premium and discount price zones in action. Equal Levels The indicator also tracks and highlights equal levels, which occur when the market repeatedly tests the same price levels. Equal levels can reinforce the significance of a support or resistance area and are represented by their own set of color markers. The image above shows Radi IQ distinguishing equal highs and equal lows. Equal Highs When you see two or more highs that are approximately the same, it suggests that the market is repeatedly rejecting attempts to push higher. This signals a strong resistance level where sellers (or stop-hunters) are active. Equal Lows Similarly, consecutive lows at the same level indicate strong support, where buyers step in consistently, preventing further decline. Strong Highs and Lows Strong High A strong high is a price level where the market repeatedly fails to push higher. Typically, it’s characterized by: Rejection: Price approaches the high but then reverses sharply, often leaving long upper wicks on the candlestick chart. Consolidation: Multiple bars might show highs that are very close in value (often termed "equal highs"), indicating a well-established resistance zone. Market Sentiment: This pattern suggests that sellers are actively defending that level, preventing further upward movement. Strong Lows Conversely, a strong low is a price level where the market repeatedly fails to break lower. It is identified by: Bounce Back: Price touches the low and then rebounds sharply, often leaving long lower wicks. Consistency: Multiple lows occur around the same level (sometimes referred to as "equal lows"), marking a solid support area. Market Sentiment: This indicates that buyers are stepping in at that level, absorbing selling pressure and supporting the price. The image above shows Radi IQ detecting both a strong high and strong low, while the detected strong low acts as support when retested. Liquidity Grabs Liquidity grabs occur when the market temporarily moves to absorb liquidity, often triggering stop-loss orders and leading to rapid price movements. Radi IQ flags these events by identifying conditions where price moves against recent pivots, helping traders spot potential liquidity-related reversals or breakouts. The image above shows Radi IQ identifying both an upside liquidity grab and a downside liquidity grab. Upside Liquidity Grab (Bearish) An upside liquidity grab happens when the price moves above a well-known resistance area or recent high. This move is often short-lived. Many traders place stop-loss orders or pending buy orders just above resistance levels. Institutional players may intentionally push price upward to trigger these orders, thereby “grabbing” the liquidity available at that level. Downside Liquidity Grab (Bullish) A downside liquidity grab is the mirror image: the price briefly dips below a key support level or recent low. Traders often place stop-loss orders or pending sell orders just below support levels. An intentional drop below this support can trigger these stops, allowing institutional players to capture liquidity. Multi-Timeframe Analysis and Swings By using data from different timeframes, Radi IQ offers a broader perspective on market trends. It highlights significant swing highs and swing lows, providing visual cues that indicate the market’s directional bias. This feature assists traders in identifying both short-term opportunities and long-term trends. The image above shows Radi IQ detecting higher swings and lower swings. IQ Meters / Fibometer IQ Meters (Fibometers) are a proprietary TradingIQ tool that allows traders to easily identify the highs and lows of the current trend and where current price is relative to these points. The image above depicts the IQ Meters—an exclusive TradingIQ tool designed to help traders evaluate trend strength and retracement opportunities. When the lower timeframe Zig Zag IQ and the higher timeframe Zig Zag IQ are out of sync (i.e., one is uptrending while the other is downtrending, with no active positions), the meters display a neutral color as shown in the image. The key to using these meters is to identify trend unison and pinpoint key trend retracement entry opportunities. Fibonacci retracement levels for the current trend are interlaced along each meter, and the current price is converted to a retracement ratio of the trend. These meters can mathematically determine where price stands relative to the larger and smaller trends, aiding in identifying entry opportunities. The top of each meter indicates the highest price achieved during the current price move. The bottom of each meter indicates the lowest price achieved during the current price move. When both the larger and smaller trends are in sync and uptrending, or when a long position is active, the IQ meters turn green, indicating uptrend strength. When both meters are green, it indicates uptrend strength as both the higher timeframe trend and lower timeframe trend are in unison. Look for price to retrace to key fibonacci retracement levels during this time period. When both trends are in sync and downtrending, or when a short position is active, the IQ meters turn red, indicating downtrend strength. When both meters are red, it indicates downtrend strength as both the higher timeframe trend and lower timeframe trend are in unison. Look for price to retrace to key fibonacci retracement levels during this time period. Summary Radi IQ serves as a robust, data-driven tool for traders who seek a deeper understanding of market structure. By integrating internal and external analysis, fair value gap detection, order block identification, premium discount zoning, equal level tracking, liquidity grabs and much more into one indicator, it offers a multi-layered view of the market. This helps traders not only recognize potential turning points and areas of market stress but also manage risk more effectively and plan their trades with greater precision. The indicator’s clear visual representation and dynamic updates make it a practical addition to any trader’s toolkit.
Indicatore Pine Script®
di Trading-IQ
9
Trident Pattern [SpeculationLab]This indicator is based on the increasingly popular Trident strategy, and is best suited for the 30-minute timeframe. It performs particularly well on naturally bullish instruments such as gold, Bitcoin, and Nasdaq.All components of this indicator are original work by Speculation Lab. Rather than stacking random features, this script is designed as a modular structure where each part works in synergy to build the Trident logic. 🔧 Modules Included: Session Highlight — Visual display of the London Kill Zone 5 Customizable EMAs — Fully adjustable length, color, and toggling Bullish Fair Value Gap (FVG) detection Four types of Doji candlestick recognition 🧫 Logic Breakdown: 1. Time Session Filter By default, the indicator highlights the London Kill Zone, defined as 03:00–06:30 New York time.Users can freely adjust the time zone, time range, and background color, with preconfigured zones including New York, London, Tokyo, Shanghai, and Sydney. ⚠️ Note: To maintain flexibility, the London Kill Zone is not enforced as a mandatory entry condition. Users may apply it as an optional filter based on their own trading style. 2. 5 EMA Trend Filter The script uses a five-EMA structure to confirm market trend.The default EMA lengths are 5, 9, 13, 21, and 200.A valid entry requires: EMAs 5, 9, 13, 21 stacked in descending order AND the 1-hour close is above EMA(200) All EMAs are fully customizable and can be toggled on/off. 3. Bullish Fair Value Gap (FVG) Bullish FVGs are detected using a 3-bar logic, from high to low .To filter noise, the gap must be greater than 0.7 × ATR(14) by default.Both the ATR period and multiplier are adjustable. The FVG Extend setting has two roles: It controls how many bars the FVG box extends to the right (default: 20) It defines the active window for confirming entries within the FVG zone Users can fully customize the box color, text, and center line. 4. Doji Detection The script detects four types of Doji candlesticks: Standard Doji Long-legged Doji Dragonfly Doji Gravestone Doji The Body Ratio setting controls how small the candle body must be relative to the full range (default ≤ 0.1).Long Wick Ratio and Short Wick Ratio further help fine-tune wick length criteria. ✅ Entry Signal Logic: A Trident entry is confirmed when all the following conditions are met: Trend Filter Passes EMAs are stacked: 5 > 9 > 13 > 21 1H close is above EMA(200) A Doji candle appears inside an active FVG zone The next candle closes below the Doji’s high If all conditions are satisfied, a Trident signal is triggered at the close of the confirming candle. ⚠️ Disclaimer This indicator is intended for educational and research purposes only. It does not constitute financial advice or trading signals.Trading involves high risk. Please act according to your own risk management.Speculation Lab and the author bear no responsibility for any financial outcomes resulting from the use of this script. 本指标基于近年来日益流行的 Trident（三叉戟）策略，推荐使用在 30分钟时间框架，尤其适用于黄金、比特币、纳斯达克等具有自然上涨倾向的交易品种。本指标由 Speculation Lab 原创开发，结构严谨，逻辑清晰。 本指标采用模块化设计，各部分功能相辅相成，共同构建三叉戟策略逻辑，而非杂乱堆砌。 🔧 指标包含以下功能模块： 交易时段高亮 — 默认显示 伦敦杀戮区 五条可调节 EMA 均线 — 长度与颜色可自定义，模块可单独开关 看涨 Fair Value Gap（公平价值缺口）检测 四种 Doji（十字星）K线形态识别 🧫 逻辑说明： 1. 交易时段过滤 默认高亮显示的伦敦杀戮区为 纽约时间03:00–06:30。用户可自由调整 参考时区、具体时段和 背景颜色，支持预设时区包括纽约、伦敦、东京、上海和悉尼。 ⚠️ 说明：为保持策略灵活性，伦敦杀戮区并非强制入场条件。 是否采用此过滤，可由用户自行决定。 2. 趋势过滤（五条EMA） 该指标采用五条 EMA 来确认市场趋势。默认长度为 5、9、13、21、200。入场信号要求满足以下条件： EMA 5、9、13、21 从上到下依次排列（多头排列） 且 1小时图上的收盘价高于 EMA200 所有均线均可单独启用/关闭，长度与颜色均可自定义。 3. 看涨 FVG 区域识别 FVG 使用 3 根K线结构进行检测，从 high 到 low 。默认要求缺口 大于等于 0.7 × ATR(14)，以过滤微小无效缺口。ATR周期与乘数均可自定义设置。 “FVG Extend”参数有两个作用： 控制图表上 FVG 区域箱体的右延伸长度（默认20根K线） 用作 FVG 活跃期的判断标准，仅在此区间内出现的 Doji 才会被视为有效信号触发条件 用户可自由设置 FVG 的背景颜色、文字样式与中线颜色。 4. Doji（十字星）识别 支持以下四种常见 Doji 形态识别： 标准十字星 长腿十字星 蜻蜓线（下影线长） 墓碑线（上影线长） “Body Ratio” 控制实体占K线全长的比例，默认不超过0.2。“Long Wick Ratio” 与 “Short Wick Ratio” 可进一步调节影线长度识别标准。 ✅ 入场信号逻辑： 符合以下所有条件时，触发三叉戟入场信号： 趋势过滤通过 EMA 依次排列为 5 > 9 > 13 > 21 且 1小时收盘价高于 EMA200 在 FVG 区域内出现有效 Doji 十字星 下一根K线收盘价 低于 Doji 的最高价 若以上条件均满足，则在确认K线收盘时触发三叉戟入场信号。 ⚠️ 免责声明 Disclaimer 本指标旨在提供技术分析工具，仅用于教育与研究目的，不构成任何投资建议或交易指令。交易具有高风险，请根据自身风险承受能力合理操作。使用本脚本所导致的任何盈亏，作者与 Speculation Lab 不承担任何责任。
Indicatore Pine Script®
di SpeculationLab
3
cd_full_poi_CxOverview This indicator tracks the price in 16 different time frames (optional) in order to answer the question of where the current price has reacted or will react. It appears on the chart and in the report table when the price approaches or touches the fvg or mitigations (order block / supply-demand), the rules of which will be explained below. In summary, it follows the fvg and mitigations in the higher timeframe than the lower timeframe. Many traders see fvg or mitigates as an point of interest and see the high, low swept in those zones as a trading opportunity. Key levels, Session high/lows and Equal high and lows also point of interest. If we summarise the description of the point of interest ; 1- Fair value gaps (FVG) (16 time frames) 2- Mitigation zones (16 time frames) 3- Previous week, day, H4, H1 high and low levels 4- Sessions zones (Asia, London and New York) 5- Equal high and low levels are in indicator display. Details: 1- Fair Value Gaps : It is simply described as a price gap and consists of a series of 3 candles. The reaction of the price to the gap between the 1st and 3rd candle wicks is observed. The indicator offers 3 options for marking. These are : 1-1- ‘Colours are unimportant’: candle colours are not considered for marking. Fvg formation is sufficient.(Classical) 1-2- ‘First candle opposite colour’ : when a price gap occurs, the first candle of a series of 3 candles must be opposite. For bullish fvg : bearish - bullish - free For Bearish fvg : bullish - bearish - free 1-3- ‘All same colour’ : all candles in a series of 3 candles must be the same direction. For bullish fvg: bullish - bullish - bullish For bearish fvg : bearish - bearish – bearish Examples: 2- Mitigation zones: Opposite candles with a fvg in front of them or candles higher/lower than the previous and next candle and with the same colour as the fvg series are marked. Examples : 3- Previous week, day, H4, H1 high and low levels 4- Sessions regions (Asia, London and New York) 5- Equal high and low levels: Annotation: Many traders want to see a liquidity grab on the poi, then try to enter the trade with the appropriate method. Among the indicators, there is also the indication of grabs/swepts that occur at swing points. It is also indicated when the area previously marked as equal high/low is violated (grab). At the end, sample setups will be shown to give an idea about the use of the indicator. Settings: - The options to be displayed from the menu are selected by ticking. - 1m, 2m, 3m, 5m, 5m, 10m, 15m, 30m, h1, h4, h4, h6, h8, h12, daily, weekly, monthly and quarterly, 16 time zones in total can be displayed. - The ‘Collapse when the price touches mitigate’ tab controls whether to collapse the box as the price moves into the inner region of the mitigate. If not selected, the size of the mitigate does not change. - ‘Approach limit =(ATR / n)’ tab controls how close the price is to the fvg or mitigate. Instant ATR(10) value is calculated by dividing by the entered ‘n’ value. - All boxes and lines are automatically removed from the screen when the beyond is closed. - Colour selections, table, text features are controlled from the menu. - Sessions hours are set as standard hours, the user can select special time zones. Timezone is set to GMT-4. - On the candle when the price touches fvg or mitigate, the timeframe information of the POI is shown in the report table together with the graphical representation. The benefits and differences : 1- We can evaluate the factors we use for setup together. 2- We are aware of what awaits us in the high time frame in the following candles. 3- It offers the user the opportunity to be selective with different candle selection options in fvg selection. 4- Mitige areas are actually unmitige areas because they have a price gap in front of them. The market likes to retest these areas. 5- Equal high/low zones are the levels that the price creates to accumulate liquidity or fails to go beyond (especially during high volume hours). Failure or crossing of the level may give a reversal or continuation prediction. Sample setup 1: Sample setup 2: Sample setup 3: Cheerful trades… Enjoy…
Indicatore Pine Script®
di cdikici71
35
DT_KEY_LEVELSDT_Key_Levels: Powerful Market Structure Analysis Indicator DT_Key_Levels is an advanced indicator for fundamental market structure analysis, optimized for higher timeframes (D1, W, M). The indicator combines three powerful technical analysis tools — fractals, Fair Value Gaps (FVG), and psychological levels — in one comprehensive solution. Three Components of the Indicator 1. Enhanced Fractal System The indicator uses an improved version of Bill Williams' classic fractals, allowing for deeper market structure analysis: Dual Identification System: Standard 5-bar fractals (displayed with thick lines) for analyzing reliable support/resistance levels Light 3-bar fractals (displayed with thin lines) for early identification of potential reversal points Intelligent Tracking System: Automatic detection and filtering of completed fractals Marking fractals with corresponding timeframe designation (HTF-1D, HTF-1W, HTF-1M) Tracking and marking the All-Time High (ATH) 2. Fair Value Gaps (FVG) System The indicator identifies and visualizes price gaps in market structure — zones that often act as magnets for future price movements: Precise Identification of Inefficient Zones: Bullish FVG: when the current candle's low is above the -2 candle's high Bearish FVG: when the current candle's high is below the -2 candle's low Detailed Visualization: Clear display of upper and lower boundaries of each FVG Midline (0.5 FVG) for determining key reaction levels within the gap Marking each FVG with "FF" (Fair value Fill) label for quick identification Dynamic Management: Automatic removal of FVGs when they are filled by price movement Customizable line extension for improved tracking of target zones 3. Intelligent Psychological Levels The indicator automatically determines key psychological levels with adaptation to the type of instrument being traded: Specialized Calibration for Various Assets: Forex (EUR/USD, GBP/USD, USD/JPY): optimization for standard figures and round values Precious metals (XAUUSD): adaptation to typical gold reaction zones with a $50 step Cryptocurrencies (BTC, ETH): dynamic step adjustment depending on current price zone Stock indices (NASDAQ, S&P500, DAX): accounting for the movement characteristics of each index Smart Adaptation System: Automatic determination of the optimal step for any instrument Generation of up to 24 key levels, evenly distributed around the current price Intelligent filtering to display only significant levels Practical Application Strategic Analysis Identifying Key Structural Levels: Use monthly and weekly fractals to determine strategic support/resistance zones Look for coincidences of fractals with psychological levels to identify particularly strong zones of interest Determine long-term barriers using type 5 fractals on higher timeframes Analysis of Market Inefficiencies: Track the formation of FVGs as potential targets for future movements Use FVG midlines (0.5) as important internal reaction levels Analyze the speed of FVG filling to understand trend strength Tactical Trading Decisions Entry Points and Risk Management: Use bounces from fractals in the direction of the larger trend as a signal for entry Place stop-losses behind fractal levels or key psychological levels Monitor the formation of new fractals as a signal of potential reversal Determining Target Levels: Use unfilled FVGs as natural price targets Apply nearby psychological levels for partial position closing Project higher timeframe fractals to determine long-term goals Indicator Advantages Comprehensive Approach: combining three methodologies for a complete understanding of market structure Intelligent Adaptation: automatic adjustment to the characteristics of different types of assets Clean Visual Presentation: despite the abundance of information, the indicator maintains clarity of display Effective Signal Filtering: automatic removal of completed levels to reduce visual noise Higher Timeframe Optimization: specifically designed for daily, weekly and monthly charts Usage Recommendations Use the indicator only on D1, W, and M timeframes for the most reliable signals Pay special attention to areas where different types of signals coincide (e.g., fractal + psychological level) Use higher timeframe fractals as key zones for medium and long-term trading Track FVGs as potential target zones and focus on their filling
Indicatore Pine Script®
di Yar_pro_trading
The Ultimate Indicator by ATK The Ultimate Indicator By ATK This all-in-one trading indicator integrates multiple advanced tools to provide ICT traders with deep insights into market structure, liquidity zones, Fair Value Gaps (FVG), and AI-powered signals. Whether you’re a scalper or a long-term trader, this indicator offers real-time analysis and helps identify potential trading opportunities in dynamic markets. 🔵 Key Features 🔹 2 options for checking SMT (Separation and Divergence) Detection: First - Compares highs and lows of a primary symbol (e.g., NQ1!) with a user-defined comparison symbol (e.g., ES1!). Automatically detects and visualizes discrepancies (red for highs, blue for lows) between the symbols. Offers customizable comparison settings and alerts for divergence detection. Second - Real-time SMT comparison between two tickers - red/green lines. 🔹 Market Structure Change (MSS) & Break of Structure (BOS) Detection: Identifies market structure shifts and breakouts, crucial for spotting potential reversals. Customizable sensitivity and length settings to adapt to various market conditions and trading strategies. Use 3 different timeframes on the same chart. 🔹 Buy Side & Sell Side Liquidity Zones: Highlights liquidity zones on both buy and sell sides, offering a clear view of market pressure points. Configurable settings for detection length, margin, and alert conditions for liquidity sweeps like the 15-minute Buy Side Liquidity (BSL) and Sell Side Liquidity (SSL). These lines from Swing Highs & Lows: Automatically plots horizontal lines at the most recent swing highs and lows. Lines are removed once the closing price breaches these levels, ensuring real-time updates and clean charting. 🔹 Fair Value Gap (FVG) Detection: Detects FVG formations on 5-minute and 1-minute charts, making it ideal for scalpers capturing liquidity gaps. Includes directional arrows and customizable alerts based on higher and lower timeframe FVG analysis, helping traders time their entry and exit points. 🔹IFVG (Inverse fair value gap) - yellow 🔹IFVG + SMT - Light blue 🔹IFVG + SMT + HTF FVG - green/red (1 min only) 🔹IFVG + SMT + BSL/SSL Swept - green/red (1 min only) for example: 🔹 Capture and plot significant price levels at specific times throughout the trading day: TDO (True Day Open): The price at which a market opens at 12:00 AM US. TMSO (True Micro Session Open): The open price of the Q2 of the micro session. RVT (Revolving True Open): The price recorded at 12:00 PM US. AO (Asia True Open Price): The price captured at 7:30 PM US, specifically representing the opening price of the Asian session. LO (London True Open Price): 1:30 AM US AM (New York Session - Afternoon Market True Open Price): 7:30 AM US PM (Post Market Open Price): 1:30 PM US. For example TMSO: 🔹 AI-Powered Entry Detection: The script helps identify entry points based on specific candle patterns, while also considering the exponential moving averages (EMAs) for trend confirmation. 🔶FFMS Strategy: (First Five Minute Strategy) Check 5-min time frame if the price is between the high and low of the previous day. then, when NYO if there is retest on the High/Low on the 5-min chart after crossover or crossunder the 5 minute first candle high/low lines. 🔶PSP & PSP + FVG 🔹The Precision Swing Point (PSP). It helps you visually identify price decorrelation (type of SMT) among key futures contracts (NQ/ES or NQ/ES/YM/ZB) and set alerts for these significant market movements. 🔹The PSP HTF 15 Min + FVG LTF 1 Min In this strategy the script is looking for PSP in HTF (15-Min) and capture the FVG in LTF (1-Min) only if its between High and Low of the PSP. If there is a retracement in parallel micro session time, for example: Q1 with Q3 or Q2 with Q4, Q3 with Q1, etc… if the retracement was happened and the price close above/below the high/low of the FVG from the LTF that captured according to the direction for long/short, it plots an arrow. Update the script that checks the purple arrows and shows all of them each time there is a new PSP in a 15-minute timeframe and then FVG in 1 Min timeframe with the reference to the TDO/TMSO/Open session for example: Step 1: PSP 15Min LOW/HIGH Lines look for FVG by the conditions above - purple arrow Step 2:FVG founded - purple arrow SMT Fill on 15 min timeframe + IFVG 1 min - Detected option: When Sym1 closed above/below FVG and Sym2 didn't it is SMT FILL (15 Min timeframe) White arrows when captured SMT FIll + IFVG: option to turn on alert on this strategy too. 🔹Detect liquidity swept on 15-min timeframe by $$ - green/red 🔹Detect liquidity to sweep zones on by diamonds - green/red 🔹Alerts for all Events and full scenarios. Real-time notifications ensure traders can act quickly on potential trade setups. 🔵 Conclusion: This Ultimate Indicator by ATK brings together critical elements of market analysis in one tool for ICT traders, offering real-time insights, alerts, and visual aids to enhance trading strategies. Whether you’re focused on short-term price action or long-term market trends, this indicator provides the tools necessary for informed decision-making and improved trading performance.
Indicatore Pine Script®
di avielkomemi
6
IFVG ExtendedThis indicator identifies and visualizes "Imbalance Fair Value Gaps" (IFVGs) on a price chart. It highlights these gaps, tracks their evolution, and signals when they are "filled" or "invalidated" by price action. The script is quite advanced, using custom types, arrays, and dynamic drawing. 1. Types and Variables Custom Types: lab: Stores label information (x, y, direction). fvg: Stores Fair Value Gap data, including its boundaries, direction, state, labels, and other properties. Arrays: Four arrays track bullish and bearish FVGs, and their "invalidated" (filled) versions. Signals: Boolean variables to store if a bullish or bearish signal is triggered. 2. User Inputs and Parameters Display Settings: How many recent FVGs to show, signal preference (close or wick), ATR multiplier for gap size filtering, and colors for bullish/bearish/midline. 3. Chart Data Price Data: Open, high, low, close, and ATR (Average True Range) are stored for use in calculations. 4. Functions label_maker: Draws an up or down arrow label at a given point, colored for bullish or bearish. fvg_manage: Checks if any FVGs in the array have been "invalidated" (i.e., price has crossed their boundary). If so, moves them to the invalidated array. inv_manage: Manages invalidated FVGs, checking if a signal should be fired (i.e., price has reacted to the gap). Also removes old FVGs. send_it: Draws the FVGs and their labels on the chart, using boxes and lines for visualization. 5. Main Logic and Visualization FVG Detection: On each bar, checks for new bullish or bearish FVGs based on price action and ATR filter. Adds new FVGs to the appropriate array. FVG Management: Updates the arrays, moves invalidated FVGs, and checks for signals. Drawing: On the last bar, clears all previous drawings and redraws the current FVGs and their labels. 6. Alerts Alert Conditions: Sets up alerts for when a bullish or bearish IFVG signal is triggered, so users can be notified. Summary In short: This script automatically finds and tracks "Imbalance Fair Value Gaps" on your chart, highlights them, and alerts you when price interacts with them in a significant way. It uses advanced Pine Script features to manage and visualize these zones dynamically, helping traders spot potential reversal or continuation points based on gap theory
Indicatore Pine Script®
di Fent-calaix
2
ICT Master Suite [Trading IQ]Hello Traders! We’re excited to introduce the ICT Master Suite by TradingIQ, a new tool designed to bring together several ICT concepts and strategies in one place. The Purpose Behind the ICT Master Suite There are a few challenges traders often face when using ICT-related indicators: Many available indicators focus on one or two ICT methods, which can limit traders who apply a broader range of ICT related techniques on their charts. There aren't many indicators for ICT strategy models, and we couldn't find ICT indicators that allow for testing the strategy models and setting alerts. Many ICT related concepts exist in the public domain as indicators, not strategies! This makes it difficult to verify that the ICT concept has some utility in the market you're trading and if it's worth trading - it's difficult to know if it's working! Some users might not have enough chart space to apply numerous ICT related indicators, which can be restrictive for those wanting to use multiple ICT techniques simultaneously. The ICT Master Suite is designed to offer a comprehensive option for traders who want to apply a variety of ICT methods. By combining several ICT techniques and strategy models into one indicator, it helps users maximize their chart space while accessing multiple tools in a single slot. Additionally, the ICT Master Suite was developed as a strategy . This means users can backtest various ICT strategy models - including deep backtesting. A primary goal of this indicator is to let traders decide for themselves what markets to trade ICT concepts in and give them the capability to figure out if the strategy models are worth trading! What Makes the ICT Master Suite Different There are many ICT-related indicators available on TradingView, each offering valuable insights. What the ICT Master Suite aims to do is bring together a wider selection of these techniques into one tool. This includes both key ICT methods and strategy models, allowing traders to test and activate strategies all within one indicator. Features The ICT Master Suite offers: Multiple ICT strategy models, including the 2022 Strategy Model and Unicorn Model, which can be built, tested, and used for live trading. Calculation and display of key price areas like Breaker Blocks, Rejection Blocks, Order Blocks, Fair Value Gaps, Equal Levels, and more. The ability to set alerts based on these ICT strategies and key price areas. A comprehensive, yet practical, all-inclusive ICT indicator for traders. Customizable Timeframe - Calculate ICT concepts on off-chart timeframes Unicorn Strategy Model 2022 Strategy Model Liquidity Raid Strategy Model OTE (Optimal Trade Entry) Strategy Model Silver Bullet Strategy Model Order blocks Breaker blocks Rejection blocks FVG Strong highs and lows Displacements Liquidity sweeps Power of 3 ICT Macros HTF previous bar high and low Break of Structure indications Market Structure Shift indications Equal highs and lows Swings highs and swing lows Fibonacci TPs and SLs Swing level TPs and SLs Previous day high and low TPs and SLs And much more! An ongoing project! How To Use Many traders will already be familiar with the ICT related concepts listed above, and will find using the ICT Master Suite quite intuitive! Despite this, let's go over the features of the tool in-depth and how to use the tool! The image above shows the ICT Master Suite with almost all techniques activated. ICT 2022 Strategy Model The ICT Master suite provides the ability to test, set alerts for, and live trade the ICT 2022 Strategy Model. The image above shows an example of a long position being entered following a complete setup for the 2022 ICT model. A liquidity sweep occurs prior to an upside breakout. During the upside breakout the model looks for the FVG that is nearest 50% of the setup range. A limit order is placed at this FVG for entry. The target entry percentage for the range is customizable in the settings. For instance, you can select to enter at an FVG nearest 33% of the range, 20%, 66%, etc. The profit target for the model generally uses the highest high of the range (100%) for longs and the lowest low of the range (100%) for shorts. Stop losses are generally set at 0% of the range. The image above shows the short model in action! Whether you decide to follow the 2022 model diligently or not, you can still set alerts when the entry condition is met. ICT Unicorn Model The image above shows an example of a long position being entered following a complete setup for the ICT Unicorn model. A lower swing low followed by a higher swing high precedes the overlap of an FVG and breaker block formed during the sequence. During the upside breakout the model looks for an FVG and breaker block that formed during the sequence and overlap each other. A limit order is placed at the nearest overlap point to current price. The profit target for this example trade is set at the swing high and the stop loss at the swing low. However, both the profit target and stop loss for this model are configurable in the settings. For Longs, the selectable profit targets are: Swing High Fib -0.5 Fib -1 Fib -2 For Longs, the selectable stop losses are: Swing Low Bottom of FVG or breaker block The image above shows the short version of the Unicorn Model in action! For Shorts, the selectable profit targets are: Swing Low Fib -0.5 Fib -1 Fib -2 For Shorts, the selectable stop losses are: Swing High Top of FVG or breaker block The image above shows the profit target and stop loss options in the settings for the Unicorn Model. Optimal Trade Entry (OTE) Model The image above shows an example of a long position being entered following a complete setup for the OTE model. Price retraces either 0.62, 0.705, or 0.79 of an upside move and a trade is entered. The profit target for this example trade is set at the -0.5 fib level. This is also adjustable in the settings. For Longs, the selectable profit targets are: Swing High Fib -0.5 Fib -1 Fib -2 The image above shows the short version of the OTE Model in action! For Shorts, the selectable profit targets are: Swing Low Fib -0.5 Fib -1 Fib -2 Liquidity Raid Model The image above shows an example of a long position being entered following a complete setup for the Liquidity Raid Modell. The user must define the session in the settings (for this example it is 13:30-16:00 NY time). During the session, the indicator will calculate the session high and session low. Following a “raid” of either the session high or session low (after the session has completed) the script will look for an entry at a recently formed breaker block. If the session high is raided the script will look for short entries at a bearish breaker block. If the session low is raided the script will look for long entries at a bullish breaker block. For Longs, the profit target options are: Swing high User inputted Lib level For Longs, the stop loss options are: Swing low User inputted Lib level Breaker block bottom The image above shows the short version of the Liquidity Raid Model in action! For Shorts, the profit target options are: Swing Low User inputted Lib level For Shorts, the stop loss options are: Swing High User inputted Lib level Breaker block top Silver Bullet Model The image above shows an example of a long position being entered following a complete setup for the Silver Bullet Modell. During the session, the indicator will determine the higher timeframe bias. If the higher timeframe bias is bullish the strategy will look to enter long at an FVG that forms during the session. If the higher timeframe bias is bearish the indicator will look to enter short at an FVG that forms during the session. For Longs, the profit target options are: Nearest Swing High Above Entry Previous Day High For Longs, the stop loss options are: Nearest Swing Low Previous Day Low The image above shows the short version of the Silver Bullet Model in action! For Shorts, the profit target options are: Nearest Swing Low Below Entry Previous Day Low For Shorts, the stop loss options are: Nearest Swing High Previous Day High Order blocks The image above shows indicator identifying and labeling order blocks. The color of the order blocks, and how many should be shown, are configurable in the settings! Breaker Blocks The image above shows indicator identifying and labeling order blocks. The color of the breaker blocks, and how many should be shown, are configurable in the settings! Rejection Blocks The image above shows indicator identifying and labeling rejection blocks. The color of the rejection blocks, and how many should be shown, are configurable in the settings! Fair Value Gaps The image above shows indicator identifying and labeling fair value gaps. The color of the fair value gaps, and how many should be shown, are configurable in the settings! Additionally, you can select to only show fair values gaps that form after a liquidity sweep. Doing so reduces "noisy" FVGs and focuses on identifying FVGs that form after a significant trading event. The image above shows the feature enabled. A fair value gap that occurred after a liquidity sweep is shown. Market Structure The image above shows the ICT Master Suite calculating market structure shots and break of structures! The color of MSS and BoS, and whether they should be displayed, are configurable in the settings. Displacements The images above show indicator identifying and labeling displacements. The color of the displacements, and how many should be shown, are configurable in the settings! Equal Price Points The image above shows the indicator identifying and labeling equal highs and equal lows. The color of the equal levels, and how many should be shown, are configurable in the settings! Previous Custom TF High/Low The image above shows the ICT Master Suite calculating the high and low price for a user-defined timeframe. In this case the previous day’s high and low are calculated. To illustrate the customizable timeframe function, the image above shows the indicator calculating the previous 4 hour high and low. Liquidity Sweeps The image above shows the indicator identifying a liquidity sweep prior to an upside breakout. The image above shows the indicator identifying a liquidity sweep prior to a downside breakout. The color and aggressiveness of liquidity sweep identification are adjustable in the settings! Power Of Three The image above shows the indicator calculating Po3 for two user-defined higher timeframes! Macros The image above shows the ICT Master Suite identifying the ICT macros! ICT Macros are only displayable on the 5 minute timeframe or less. Strategy Performance Table In addition to a full-fledged TradingView backtest for any of the ICT strategy models the indicator offers, a quick-and-easy strategy table exists for the indicator! The image above shows the strategy performance table in action. Keep in mind that, because the ICT Master Suite is a strategy script, you can perform fully automatic backtests, deep backtests, easily add commission and portfolio balance and look at pertinent metrics for the ICT strategies you are testing! Lite Mode Traders who want the cleanest chart possible can toggle on “Lite Mode”! In Lite Mode, any neon or “glow” like effects are removed and key levels are marked as strict border boxes. You can also select to remove box borders if that’s what you prefer! Settings Used For Backtest For the displayed backtest, a starting balance of $1000 USD was used. A commission of 0.02%, slippage of 2 ticks, a verify price for limit orders of 2 ticks, and 5% of capital investment per order. A commission of 0.02% was used due to the backtested asset being a perpetual future contract for a crypto currency. The highest commission (lowest-tier VIP) for maker orders on many exchanges is 0.02%. All entered positions take place as maker orders and so do profit target exits. Stop orders exist as stop-market orders. A slippage of 2 ticks was used to simulate more realistic stop-market orders. A verify limit order settings of 2 ticks was also used. Even though BTCUSDT.P on Binance is liquid, we just want the backtest to be on the safe side. Additionally, the backtest traded 100+ trades over the period. The higher the sample size the better; however, this example test can serve as a starting point for traders interested in ICT concepts. Community Assistance And Feedback Given the complexity and idiosyncratic applications of ICT concepts amongst its proponents, the ICT Master Suite’s built-in strategies and level identification methods might not align with everyone's interpretation. That said, the best we can do is precisely define ICT strategy rules and concepts to a repeatable process, test, and apply them! Whether or not an ICT strategy is trading precisely how you would trade it, seeing the model in action, taking trades, and with performance statistics is immensely helpful in assessing predictive utility. If you think we missed something, you notice a bug, have an idea for strategy model improvement, please let us know! The ICT Master Suite is an ongoing project that will, ideally, be shaped by the community. A big thank you to the @PineCoders for their Time Library! Thank you!
Strategia Pine Script®
di Trading-IQ
32
OmniSessions [WinWorld]The indicator shows the range of 4 most popular sessions (New York, Tokyo, London, Sydney). Sessions are used to identify zones with maximum volatility, as well as to find entry points. Session boundaries can act as POI no worse than OrderBlock. In addition to sessions, you can use settings with KillZones - a range within a session that has potentially high volatility. Silver Bullet is a more advanced range that allows you to identify the potential for maximum volatility. Excellent entry points can be obtained on the sweep of the range or from the nearest orderblock. We will explain it a bit deeply below. Why use sessions? During specific sessions big financial instutions from specific parts of the world enter the market, and this fact alone let us find the most "liquid" sessions in order to catch the best price movements. If talking about orderblocks, it is just a point of interest (more precisely, it is actually a zone of interest), which usually is a zone where the signficant amount of limit orders lies, and when price enter such zone, it immediately shows a strong reaction with either breakout from this zone or it bounces against this zone. How is this indicator different from others? There a lot of orderblocks indicator out here publicly available, but huge portion of them doesn't take into calculation important smart money concepts, such as valid pullbacks, for example. Valid pullbacks is a concept of price movement, which lets us indentify quite precisely price's impulses. Based on this impulses, we search our orderblocks. This approach allows to catch the most relevant and highly liquid orderblocks, which present traders with best trade entry opportunities, because usually, when entering with these orderblocks, you follow the moves of big money players, and that gives trader an edge in trading. None of open-source indicators uses such approach ( we've studied all of them ). Also an important notice: no public code is utilized in this indicato whatsoever. We've build our own flexible session mechanism, which allows you to quickly change between different type of sessions and also choose which session to use. And the big thing is our own alorithm to deal with asset, trading sessions of which are quite exotic (such as DAX and MEOX indexes, which close and open at different times of the day, which makes it hard for indicator to catch by default), so with indicator you can enjoy trading by sessions with no "bugs". And the most user-desired and important thing: we've implemented feature to set winter and summer seasons for sessions, and this solves life-long struggle of traders to set correct trading session time, when forex exchanges switch trading hours, so now you don't need to info which our summer or winter is traded by, but just switch between seasons by one button in our indicator. And we can proudly state, no sesions indicator in the TradingView has such feature , so feel free to use it now on our indicator. How orderblocks are built? When London, New York or Asia ends, we find the closest orderblocks above and below closed session's high and low respectively. We do it by finding so called valid pullbacks ( was explained above ), then searching for valid fair value gap (FVG), that is inside of some valid pullbacks, and if we find it, then the orderblock is established and you will live orderblock and fair value gap (FVG) box ( both are colored in closed session's colour ). How are orderblocks and FVG displayed on the chart? Live orderblock and FVG are displayed as boxes on the chart, that are plolonged each bar if price didn't reach the orderblock. Some important details: When price touches FVG, FVG then is modified to reflect how much of untouched FVG is left. You will see it as decreasing of FVG box size in live mode. If price fully takes over FVG, FVG deletes; When price touches orderblock, orderblock stops being prolonged and stays on the chart and is considered as worked-out. These featues allow you to fully see live orderblocks and FVGs (if they exist) and already worked-out orderblocks to see how useful they were in the history. Is that it? No, because our indicator also shows sessions sweeps, which is historically a good indication that price grabbed the liquidity of previously closed sessions and now has enough "power" to do big movements, which is a good thing for traders, because it allows them to catch big movements and profit big. Ok, we've covered the basics, now let's talk about what exactly this indicator can do. OmnISessions is all-in-one sessions' indicator, that cointain: Sessions (Automatic adaptation to your time zone) Kill Zones Silver Bullets Session Sweeps Order Blocks (Session, Killzone, SilverBullet) Easily switch between summer and winter seasons Now you don't need to look for opening and closing times of stock exchanges: the algorithm itself adjusts the session times according to your timezone. Just change the seasonality: winter/summer and the session times will be clearly displayed on your chart. A quick view of the settings: Show: Sessions, KillZones or SilverBullet Season selection: Winter/Summer Session Color Selection Visuals: Show/Hide session name - displays session name (ex.: London, New York, Silver Bullet and etc.) on the chart; Show/Hide session box - displays session range as box with coloured background on the chart; Show/Hide High/Low sessions - displays two horizontal lines for higher and lower borders of the session; Show/Hide OrderBlocks - displays worked-out orderblocks in the history with live orderblocks and their fair value gaps (FVGs); Show/Hide live Session High/Low - displays higher and lower border of the session as lines, that are prolonged each bar even after the session ends; Show/Hide Session Sweeps - displays session sweeps of higher and lower border as dotted line; Dividers (alternative session display): Horizontal Divider Backgrounder coloring Customization: choose the display type: Sessions, Killzones or Silver Bullet. The indicator displays orders that are above or below the previous session boundaries. Below are Killzones with Order Blocks: And this is Silver Bullet with Order Blocks: Overall, you can clearly see that orderblocks, sessions sweeps and different type of sessions in one indicator allow you to fully utilize your time and mental energy, because finding orderblocks with valid pullbacks by hand is quite time-costly task, but finding them on different type of sessions, while not knowing trading hours of current trading session, is the true hell of work. OmniSessions indicator performs all of these calculations by itself, so you can focus on finding the best entries, while checking the situation on different sessions at the same time. We hope that you will find great use of OmniSessions!
Indicatore Pine Script®
di WinWorldTeam
3
HTF POI [TakingProphets]HTF POI – Higher Timeframe Points of Interest Detection The HTF POI Indicator by Taking Prophets is designed for traders following ICT (Inner Circle Trader) concepts and smart money principles. This tool automatically detects higher timeframe (HTF) points of interest (POIs) such as Fair Value Gaps (FVGs), Inverse Fair Value Gaps (IFVGs), and Consequent Encroachment (CE) levels, helping traders spot high-probability trading zones used by institutions. 🔹 Key Features: ✅ Automatic Detection of FVGs & IFVGs – Identifies key price inefficiencies across multiple timeframes. ✅ Multi-Timeframe Analysis – Detect POIs on the current timeframe and up to five higher timeframes (HTF1 to HTF5). ✅ Customizable Sensitivity – Adjust detection settings to High, Medium, or Low based on price gap size. ✅ Fair Value Gap (FVG) Encroachment Lines – Optional midpoint levels to track potential price rebalancing. ✅ Volume Display Option – View volume within detected FVGs for additional confluence. ✅ Inverse Fair Value Gaps (IFVGs) – Tracks invalidated gaps that turn into new liquidity pools. ✅ Works Across All Markets – Ideal for Forex, Futures, Stocks, and Crypto. 🔹 How It Works: 📌 Fair Value Gaps (FVGs) – Price inefficiencies caused by fast institutional moves that often get revisited. 📌 Bullish FVGs (BISI) – Formed when price gaps up, creating a demand zone where price may return. 📌 Bearish FVGs (SIBI) – Formed when price gaps down, acting as a supply zone for potential reversals. 📌 Inverse Fair Value Gaps (IFVGs) – Previously unfilled FVGs that get mitigated and act as liquidity pools. 📌 Consequent Encroachment (CE) – The 50% midpoint of an FVG, where price often reacts. 📌 Multi-Timeframe Integration – Tracks higher timeframe gaps for confluence with lower timeframe setups. 🔹 How to Use: Identify FVG zones for potential entries or exits in alignment with smart money concepts. Use Consequent Encroachment (CE) levels to confirm reactions at the 50% level of an FVG. Watch for IFVGs as they provide new liquidity pools after FVGs are invalidated. Combine with CHoCH/BOS market structure shifts and Order Blocks for higher-probability trades. 🚀 Refine your trade entries with precision using the HTF POI Indicator by Taking Prophets!
Indicatore Pine Script®
di TakingProphets
Fair Value Gap DetectorHow this indicator works: It detects two types of FVGs: Bullish FVG: Occurs when the low of the current candle is higher than the high of the candle from 2 bars ago (creates an upward gap) Bearish FVG: Occurs when the high of the current candle is lower than the low of the candle from 2 bars ago (creates a downward gap) Features: Allows users to toggle both bullish and bearish FVG detection independently Customizable colors for both bullish (default green) and bearish (default red) FVGs Visualizes FVGs using: Boxes that highlight the gap area (with 80% transparency) Labels that mark each FVG ("Bull FVG" or "Bear FVG") Visual representation: Bullish FVGs are marked with green boxes and downward-pointing labels Bearish FVGs are marked with red boxes and upward-pointing labels This indicator can be useful for : Identifying potential areas where price might return to Finding potential support and resistance zones Understanding market structure and momentum shifts
Indicatore Pine Script®
di kaveshn